Related
I thought I read somewhere that SE's microUSB cables were slightly different from others...Anyone know if that's true?
I'd be really grateful if someone tried mounting their SD card using a BlackBerry cable and told me results.
I think I ruined my phone, trying to figure out what the issue might be.
Thanks in advance, guys!
Hi,
I dont know about blackberry cable but i have use my Nokia N97's Cable and my wife's digetal camera cable on my x10, and they all work fine.
I think its a standard micro USB cable
Well, there is some difference in cables, I do not know exactly what but when I use any of the other cables I have at home, I can charge the phone just fine but it won't connect to the computer. Connecting to USB port on the computer only affects the battery, nothing else, when I don't use the original. Havn't tested all cables out there, might just be my other cables that are faulty (damn cats, chewing on anything and everything).
when phone is plugged into PC it will not show a usb connection on the phone it just charges the device the computer also does not see the phone. I have also plugged it into my macbook and nothing happens. Anyone else have this problem or any solutions?
What's your ROM?
when you put the usb in the charging port on the TB, does it feel wiggly or loose to you? It's supposed to be a solid connection. My last TB was loose in the charging port and would do the same thing
usb
try another cable, try taking out the card and putting it in the pc, the data pins might not be establishing a connection
Hey guys after trying everything possible and seeing that my buddys TB connects fine i took it to Verizon and their sending a new one in the mail hopefully that solves everything
I have the same problem, computer will charge but not recognize usb connection nor will phone recognize connection? Have had this problem across multiple roms thinking it was software problem but to no avail. Have tried multiple cables and computers? My connector appears to be in good condition visually , which probably doesn't mean much. Just wondered if anyone could think of another possibility before I lean towards hardware problem?
Had this issue before get a new cable if that doesnt work idk thats all i had to do.
I've tried 4 cables and 3 computers and 3 roms.... Guess It's a hardware problem.
had the same issue and it was hardware and my phone was replaced by Verizon.
Sometimes if you don't plug into the usb 2.0 port, things can get fishy. Usually the 2.0 port is alone opposite of the other usb ports on laptops.
Hi everyone,
and thanks in advance for any help / advice that you may have for me.
I'll start off with my question, before I unload all of my information. I simply would like to know exactly what type of USB Connection the Sony Tablet has, and therefore, what specific USB Cable I need to buy in order to connect it to my PC running Vista.
I bought a Sony Tablet and have been surprised the lack of information in regards to the USB connectivity of the device. Specifically, the exact 'cable type' required to connect the device to a PC. Everywhere I have read so far, it simply says USB Micro, or USB 2.0 micro. But when I try use the micro USB cable that I currently use with my Xperia Play phone (which works fine for PC transfer with the phone) it's doesn't work at all with the Sony Tablet. It doesn't even register on the PC when I plug the cable into the tablet. Just nothing.
Since then, I have read a lot about USB, and found that there are different types, like 'Mini USB' versus 'Micro USB'. Apparently there is also Micro USB 'A' and Micro USB 'B'. And finally, apparently there is 4 pin micro usb and 5 pin micro usb type.
hope this all makes sense, many thanks guys.
Austab.
This tablet uses micro USB, I'm pretty sure the cable for your Xperia should work fine with the tablet. Perhaps you plugged it in upside down?
Thanks for the reply, I agree with your thought train. If it works with the Xperia, then surely it should work with tablet. I'll try it again after work today, and confirm. Is it actually possible to plug the cable in the wrong way around?
I'll kick myself if I did! Thanks again, cheers.
Austab.
It cannot be plugged in upside down, unless you use extreme force and break it.
***
But yeah, this cable *should work, if it works with your Xperia Play. In principle there is only one kind of micro-USB cable (well, actually it could have either regular type A *OR micro type A connector at one end, but let's keep it simple. Mini-USB is a different kind and A and B are just connector types.
See this picture with different USB connectors:
http://en.wikipedia.org/wiki/File:Types-usb_new.svg
Your cable should have a regular USB A connector (the one on the top left) at one end and micro-USB B connector at the other end (the one on the bottom right).
Yeah, it should work; I'm using the same USB cable that I use with my Xperia Arc.
For what it's worth, I've been having issues too. Mostly windows fails to find the drivers and install them. I've talked to multiple Sony reps and have tried multiple computers but haven't had any luck. Maybe it's a bad cable but I have had Windows detect the device...just unable to install the plug-n-play drivers.
Systems I've tried it on:
Custom built - Windows 7 with Service Pack 1
Dell - Windows XP Service Pack 3
Sony Vaio Laptop - Windows XP Service Pack 3
I had the same problem on both of tablet P and tablet S. I can tell you, its more about luck than the wrong cable type! At the end, it just works after retrying a few plugs and unplugs.
Hope they can get a fix for this soon.
Hey again guys, I've now tried the cable again with my Sony Tablet, and I'm definitely plugging it in correctly. There's no response whatsoever on the tablet or the PC once I've plugged the cable in.
When using the same cable on my Xperia play, the phone will instantly start charging once I plug the cable in to the PC. However, the PC doesn't actually recognize the phone as a device (i.e. it doesn't show up in windows explorer, or launch the Ericsson Phone Software, as it once did). It charges the phone, but doesn't talk to it, if that makes sense.
So it would seem that some Micro USB cables are good for charging only, but not for data transfer / PC recognition.
I'll buy a different cable tomorrow so will let you know if it works then.
Thanks again for all the replies guys I appreciate it.
cheers again,
Austab
Looks like the cable is faulty then and you have to try another one.
I bet one of data wires is broken, or a data contact inside connector is broken (worn down), because when you connect your Xperia Play it should also be recognized as a device.
Then again, maybe there is something wrong with your computer.
Can you try the same cable on another computer, and see if the device is recognized, before you buy a new cable. Or let them check the cable at the store to see if it really is faulty.
My understanding is you need an OTG USB cable, (On The Go) - this is what you need to connect USB keys and other hard-drives and so therefore I would think external PCs too.
I bought a nokia one for around 5 pounds from amazon, do a search for OTG USB cables,
thanks
Pratish
He wants to connect it to a computer, not connect external devices to it.
So he needs a regular micro-USB cable.
the cable is USB Host finde with this name
People, wtf are you talking?!
He *does not* need USB host (OTG) cable. That's for connecting USB devices, like keyboard, mouse, USB-storage etc., to your tablet.
He wants to connect his tablet to a computer. For that he needs a regular type A USB to type B micro-USB cable.
Hi,
Would seem like op had a charging cable, not data one. As stated, he need a regular data cable with appropriate connectors. OTG has nothing to do with it.
Sent from my HTC Desire using XDA App
Hi Crazzzik,
so you're saying that there are micro usb cables for charging only, and then there are micro usb cables for data + charging etc? That would explain things perfectly for me, as my cable seems to work for charging devices, but not communicating with a PC (i.e. data transfer).
I'm getting a new cable today - sorted!
Many thanks everyone for your help & advice
Austab
Yes when I got the cable for my sony tablet s, I saw several usb cables that would fit the tablet, but on the package it said specifically "for charging only, not meant for data transfer", so they do make the cabkes just for charging, as a PC tech, I was a little embarrassed that I just found this out this weekend.
Thanks
I also got a microUSB-cable adapter, it works fine with usb driver / joypad and keyboard
but not sure if it's capable for connecting with PC or even for charging
hello all,
I recently bought the usb cable for the tablet they sell at the sony store. The micro usb to female normal usb ( I think you know what im talking about). It is sony tablet specific. The micro usb end of the cable is square instead of tappered at one side. it worked fantastic for plugging in and usb deviced to the tablet, but when I tried to plug it into my galaxy s, it wouldn't fit. just thought those thinking of buying one would appreciate the heads up so its not a shock if they try to use it on any other devices. Im sure you can find that same cable at any well stocked computer shop.
i borrowed a htc wildfire s cable, this works and installs drivers.
Yesterday I plugged my phone into my PC and went to set it to mount as mass storage but the USB connected notification wasn't there. The phone charged fine off the USB, just didn't see the PC.
I thought this may be a PC issue until going to use it on my HD Multimedia dock, phone wouldn't recognize the dock was attached. Then went and tried it in the car dock, same thing, phone charged but didn't go into cardock mode.
Also not sure if this is related but since then battery has been discharging quite quickly.
Please help.
Regards
Bruce.
Hi, did you use the original cable ?
I noticed that the cable from my galaxy S II didn't work with the razr droid !
Brahim93 said:
Hi, did you use the original cable ?
I noticed that the cable from my galaxy S II didn't work with the razr droid !
Click to expand...
Click to collapse
Yeah, i did use the original cable.
bigblueyeti said:
Yesterday I plugged my phone into my PC and went to set it to mount as mass storage but the USB connected notification wasn't there. The phone charged fine off the USB, just didn't see the PC.
I thought this may be a PC issue until going to use it on my HD Multimedia dock, phone wouldn't recognize the dock was attached. Then went and tried it in the car dock, same thing, phone charged but didn't go into cardock mode.
Also not sure if this is related but since then battery has been discharging quite quickly.
Please help.
Regards
Bruce.
Click to expand...
Click to collapse
This will probably solve ur problem:
Uninstall all motorola from PC
Reinstall motocast 1.29
Connect ur razr in every mode, and wait it reinstall the drivers.
Cheers
Thanks, but it's the phone that's not recognizing the usb cable is plugged in. I've tried it on three PCs and the darn thing will only charge, not give usb connection options.
Get a small paintbrush and a can of Dust-Off or other compressed-gas sprayer.
Hold the phone between your knees with the USB port up. Swirl the brush around inside the USB jack while blowing air into it at the same time.
Try it now.
Micro USB jacks have a very nasty habit of collecting pocket lint. It can prevent the cables/plugs on any device from making a solid electrical contact.
This will likely become a routine operation that you perform once a week or so.
You can buy micro-USB rubber plugs that protect a female jack from damage and dirt. You should try the usual places to find one; Amazon, DigiKey, Fry's, JameCo, etc.
If this doesn't get it, you may be looking at either replacing the jack (if you can un/solder very small things), or replacing the phone itself.
PS: If you have geeky friends who like pranks, get a high-powered magnifying glass and check for Scotch Tape on the USB jack contacts. I've done this to an obnoxious iPhone FanBoyz phone before. I confessed before his battery was completely dead...
bigblueyeti said:
Thanks, but it's the phone that's not recognizing the usb cable is plugged in. I've tried it on three PCs and the darn thing will only charge, not give usb connection options.
Click to expand...
Click to collapse
Connect it into back usb.
Sent from my XT910 using Tapatalk 2
Did anyone ever find a solution to this? I'm having the exact same issue, have tried clearing out the USB port, different cables and every port on my PC. It charges on connection but doesn't recognise that it is connected to a computer rather than a power port.
Any advice?
Mithre said:
Did anyone ever find a solution to this? I'm having the exact same issue, have tried clearing out the USB port, different cables and every port on my PC. It charges on connection but doesn't recognise that it is connected to a computer rather than a power port.
Any advice?
Click to expand...
Click to collapse
Are you on stock or custom rom ?
SAJdroid said:
Are you on stock or custom rom ?
Click to expand...
Click to collapse
Stock. I'm thinking of doing a factory reset as it has been freezing a lot recently and I suspect its a software issue, but I was hoping to do a proper backup first, however I lost root a while ago when I updated to ICS . I don't know if the freezing and not recognising computer could be two sides of the same issue?
Hi,
Having a problem since a few weeks with my s3.
Normally i could connect wiht my phone to any pc,, without any problems. Either it be unix, win, whatever...
Suddnely it stopped working, only thing that happens is charging when i connect it to my pc. Different cables tested, original one, etc..
Connecting it to different pc's resulted in a no go.. so it must be phone related.
No windows pop up, or anything!!
So I figured: Let's install a new rom.
Tried ultima 15 rom, got a different CM rom now (sentinel)... all to no avail.
Is it possible that this has something to do with my radio?
rom info:
android: 4.3
baseband: CEEMG2
Anyone have an idea what to do? Even ADB push ain't working..
See your identical post
I experienced the same problem when m using the Galaxy Nexus S But it was solved by using the app from play store named SD booster... In this app m just set the value of sd card to 1024 give root access and Boom my phone is connected as normal
If this not help then i seriously recommend you to replace the charging port of the mobile through samsung outlet
Go into developer settings, some ROMs may have different ways to get into develop er setting and after you get in make sure USB debugging is enable ^.^
Sent from my SPH-L710 using XDA Premium 4 mobile app
Usb debugging is not required for phone to pc connection see basic faqs and guides .
But as OP has ruled out drivers and cable that only leaves the phone so its worth trying .
Usual replies are
Drivers
Cable
Dirty USB Ports
Not connected to main-board usb port .
I had same issue with my Galaxy SII and when i took it to service center they said mother board needs to be replaced.
So after that SII was good as new.
Got same problem here.
phone is charging over usb , but no data connection (tried different usb cables, different usb ports, different pc etc) but nothing..
also.. tried in download mode and so (after reading forums..) but without success.
then i decided to dissasemble that phone and look, what's inside that beast
cleaned usb port (inside, with contact cleaner), resoldered all pins and etc..
reassembled it back to one piece again and still, no data connection, but only charging
so, here i am, what to do next ? change the usb port on motherboard ?
(visually, everything looks right, good solder points and etc.)
Thanks, Martin
hani93 said:
Got same problem here.
phone is charging over usb , but no data connection (tried different usb cables, different usb ports, different pc etc) but nothing..
also.. tried in download mode and so (after reading forums..) but without success.
then i decided to dissasemble that phone and look, what's inside that beast
cleaned usb port (inside, with contact cleaner), resoldered all pins and etc..
reassembled it back to one piece again and still, no data connection, but only charging
so, here i am, what to do next ? change the usb port on motherboard ?
(visually, everything looks right, good solder points and etc.)
Thanks, Martin
Click to expand...
Click to collapse
if anybody interested:
i've got it working again :victory:
basically, the problem was the hard way (crap usb data connections on motherboard)
soldered new ways for data+ and data-, and now it's back alive again...
(pictures of ways in attachment)
Martin
see you fixed it already but a note to others :
try using usb port right on the motherboard instead of the case front panel usb ports.....connecting to the front usb ports didn't work for me on some roms, but the rear one always connected so I just have a long cable running out of the back to connect my phone and it works on all roms I've used so far
Nice work hani93, i unfortunately do not dare to desolder and solder this stuff
I've noticed another thing though which is weird!!
When i tried to charge my phone via the power charger (the ac one?), when i check my battery view it still says that i'm charging via USB.
I don't think this is correct, i thought it should say AC or something and when charging via USB port on pc it should display USB?
I think this might be one of the issues that it's also not popping up on the computer.
Anyone know what is causing this or someone can confirm that when charging via power supply it should say something else then USB?
Just confirming your question when charging by PC it says (USB) and when its charging from the Mains it says (AC).
hmmm... guess it must be a hardware issue then?
Either usb port or mainboard... christ...
open it up and cleaned the contacts a bit of the usb port...
Still not functioning..
Morbie said:
open it up and cleaned the contacts a bit of the usb port...
Still not functioning..
Click to expand...
Click to collapse
try to go into Download mode (volDown+Home+Power) and then connect usb, same situation?(eg, no data connection to pc ?)
if nothing again.. try to clean usb port inside (where you plug usb cable), sometimes there is dust and etc. then it stops working.
also, how did you clean contacts on motherboard ? i suggest to take soldering iron with clean bit, and drag iron along the pins.