Related
Ok, I tried root, installing a new recovery and then installing CM 7.2
1) Photon Torpedo for root - no problem
2) Installed CWM recovery apk - and then boot into CWM recovery - no problem
3) Backup system to sdcard - no problem
4) install CM7.2 + gapps - it flashed no problem
(now as you can tell, i forgot to unlock the bootloader)
5) reboot - PROBLEM
I got the "Failed to Boot 2" error, i had it plugged into AC and had 70-80% charge when i started, however, i let it set after the reboot for 20 or so minutes, was off doing something.
I tried rebooting a couple of time, same problem
EVENTUALLY: It would simply not turn on anymore, i think the battery is drained and it will not charge being plugged into wall socket or USB.
How do I get it to charge?
- Do I find a friend with a photon running stock that i can put my battery in, will it charge that way?
- Can a sprint store simply charge the battery for me?
I figure once I can get that going, I can run RSD lite and recover via an SBF image.
Thanks
This has happened to me.. battery drains and doesn't whant to boot.. what I do is.. take battery out., plug in ur charger.(sometimes you get a white light,) press power button, YOU KIGHT HAVE TO TRY SEVERAL TIMES until the green light comes on..but once you see it put your battery back in.. and it should start charging.
Sent from my MB855 using XDA App
When I say several times.. I ment unplugging your phone from charger, plug back in , push power button.. and again( until it powers on) not just pressing power button until. Didn't know if I specified well enough. Hope this helps.
Sent from my MB855 using XDA App
i actually tried a different usb port a bit ago and have a white indicator light on now while plugged in... not sure what that means
I will try your way in a bit if this doesn't mean anything useful tho... thanks
K, am nor really sure what the white light is either.. I just know, on stock when you plugged phone to charge (being dead) green light turns on,screen Motorola logo shows then goes to a battery charging animation.. the white light did nothing for me. But hope you run better luck.
Sent from my MB855 using XDA App
after about 5 minutes i got a green light now... maybe the software for the battery charge display got whacked when i wiped system and tried to install CM 7 - but the hardware part of the charge works.
The only thing I can think of is that white means: i'm charging, but don't try to boot me up at the moment.
I also notice, once it gets a charge it tries to automatically boot - anyway to avoid this?
If its charging you should be able to just boot into RSD lite mode without the phone trying to boot into a ROM..
Sent from my MB855 using XDA App
If the phone is off and u plug it to charge, it shouldn't boot into the ROM, yes the Motorola logo comes up as it does when u turn the phone on, but then goes to charging..
Sent from my MB855 using XDA App
Well, every time it boots i get the
"Failed to boot 2"
Something about NvFlash (can't remember the text)
"Battery to low to flash"
Then it is just stuck there, but not sure if it is charging at that point or not... but not sure if i have enough battery to RSD Lite an SBF image
t3xazboy said:
If the phone is off and u plug it to charge, it shouldn't boot into the ROM, yes the Motorola logo comes up as it does when u turn the phone on, but then goes to charging..
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
Mine boots into *nothing* i forgot to unlock the bootloader so the rom i flashed gives me a "Failed to Boot 2" every time it powers on
K, let me power my phone off and kinda try to recreate the "not charging while plugged in" problem.. (sometimes it happens when I power off.) And ill see wich method gets the phone to just charging.. br
worse comes to worse, i know someone with a photon and i can ask if i can charge my battery in their phone
Just tried it.. and yeah phone wouldn't boot or charge by pressing the power button or connecting to charger.. but I did what I always do.. pull battery, connect charger, green light turns on, I insert battery, and goes to charging.. I also tried goin on RSD lite mode without battery inserted. And I got the same error about battery to low to flash. Have you tried this method I just wrote in this reply to get battery to charge?
Sent from my Mopho Cm7.2
Here are a couple things i tried
1) remove battery
2) make sure phone is not connected to charger
3) plug in charger
4) logo appears - says "Failed to boot 2"
5) as "Starting RSD Mode" starts, i have inserted the battery
6) I still get "Battery is too low to flash"
also tried tried with vol-up (Fast boot mode) and vol-down (NvFlash recovery mode) - and ultimately i get "Battery is too low to flash" no matter what
Thanks for the help, however.
side note: found an external battery charger for the photon on amazon for $4, i might just buy one.
Did u insert battery before logo appears? If so, then I am out of ideas, lol hopefully you can get it working soon.
Sent from my Mopho Cm7.2
I just tried something like that now. The charger is plugged into the wall outlet. Basically i plug it in, green light comes on, quickly snap the battery in place before logo appears
I get the logo and the messages at top as normal, but at that point, i don't think it is charging anymore
Lol darn it.. at that point am out of options.. sorry it didn't work.. btw how you forget to be unlocked lol.. anyhow I would go to your friends, borrow his charged battery just so you can get to stock, and start fresh, then return battery obviously, lol
Sent from my Mopho Cm7.2
Yeah i have to charge it elsewhere - i just read some other threads here about people messing up their boot with a "Failed to boot 2" error, the system simply will nto charge a battery at the boot loading screens... so, I bought that charger off amazon for $7 (including shipping), be nice to have it if i continue to fiddle with the phone.
for the next few days... people can't call me... whoop de doo. However, I am pretty certain it is not bricked, so i'm not freaked anymore.
Still, thanks for all the help you tried!
Could you post a link for that charger, I have a second battery I would like to be able to charge.
Lol.. well there u go,
Sent from my Mopho Cm7.2
A while back I installed CM7 on my backflip when i still used to it (now have Atrix 2) , now I want to start modding it again but it wouldnt turn on, I left it charging for a while and it would just show the white M screen, then a black screen (which was still lit up) and then completely off, then again and again and again etc. on one of those boots i pressed the J and D on my keyboard and unplugged it from the wall and hooked it up to my computer, flashed RSD lite with 2.1 and now it sometimes makes it all the way booting up and after like using it for 5-10 seconds, bam, restarts, I think it is a problem with the software too not a battey issue ( i know the BF has an issue with the battery that makes it restart ), because when I booted up into recovery mode to do a factory reset the phone wouldn't restart like it would the other times, been trying to fix this for two days with two different batterys but sadly no success, any idea how I can fix this? I love my backflip and hope it isnt lost forever. Also when I boot it up after flashing with RSD lite it doesnt show me the android setup screen just normal 2.1 boot, then 5 seconds later restarts
Please Help!
I have the same problem. It appears to only occur when using chargers that check resistance on the data pins to determine output current. My old iphone charger causes a boot loop, even with a full battery, while the included Motorola 550 mAH charger works fine, for example. Have you tried a different charger?
A few days ago my phone got soaked through my pants as I was working in the rain. I came home, dried it out, etc. and tried to turn it on. Wouldn't turn on, so I started charging it. I eventually got it to turn on and it seemed to be working fine except for some reason it said the battery life was at 0 %. Note that it was still working normally otherwise.
I went into recovery, made a backup, and did a factory reset to see if that would fix the problem. It didn't, so I restored the backup. Now the phone won't turn on at all.
When plugged in, it shows the charging battery symbol, and if you hold power to turn the phone on it will sometimes begin to start, but it gets to the boot animation and simply stays there forever (I've left it at the boot animation for several hours to no effect). If I try to boot into recovery it simply does not work; it will either just restart the battery charging animation or boot normally (and then get stuck on the boot animation).
In a last ditch effort, I was going to try to flash a stock ROM from Heimdall. However, I plugged my phone in and tried to enter download mode and was greeted with the error: "LOW BATTERY!! CAN'T DOWNLOAD!!." This was after charging the phone all night. I then proceeded to charge the phone for another hour then try again, to the same error. And now here I am. It seems the problem is that my phone will charge, and the battery will be full but for some reason the phone doesn't recognize that the battery has a charge, so it just thinks it's at 0%. I've tried a different battery and was unsuccessful. Is there any way that I can either force my phone to enter download mode or somehow get it to recognize the charge on the battery? Or is there some other way I could resolve this? Or is my phone simply gone for good?
I am (was) running a rooted I777 with Slim Bean ROM ( I believe v8) 4.2.
Have you tried using a JIG it can be an option
If a JIG doesn't work you can try removing the battery, then plug the phone to the PC and go to download.
But for me the problem is with the battery. If after flashing the ROM you get the same results, don't think it and BUY A NEW BATTERY.
Good luck.
Sent from my Nexus 7 2012.
If I'm bad at English is because I'm from Argentina and I'm learning.
I has the same problema, I spend two days searching on the web, but i didnt have any idea.., ,y problem is. when we conect to ANY charger (car/wall/PC-USB..) appears on screen a batery logo, but the batery never charged..., I tried to enter to the CW but, the keys combination doesnt make anything on the phone, and without live on it, I cant access to CW..., I wait for 2 hrs, with these cell phone conected to charger to see if the it gone works...
ANYONE has another idea for how we resolve these issue? My phone has a stable version of CyanogenMod..
same with me but what i did was put a different battery in, let it charge for a bit then put the original one in and it only started charging after i used my car charger as i was driving to work so thats how i fixed mine.
Here's the story: I'll try to make it as short as possible (I'll also put on a TL;DR at the end)
My phone is rooted, flashed to Cyanogenmod 11 nightly build, no problems when I flashed these guys.
I installed Lucky Patcher to patch an app, put some files on my SD card (bunch of PSX games)
just put it out there if that changed anything
My battery was low at that time and I did not expect that if I let it shut down by itself, I could still open it just like I do in the past.
Phone totally has no charge on my battery 0%. I plugged in my charger, the phone opens up but it only opens the M logo with Dual core technology (not the pulsing M). Tried to charge it overnight, still stuck on dual core screen, tried resetting using Power + Volume Down, and also going through where AP fastboot, BP Tools was, If I choose any of them (except for fastboot) it would redirect me again to the dual core logo.
sometimes I get lucky if I choose BP tools and goes to TWRP recovery (safestrap installed), tried to boot there and still no luck.
also tried unplugging charger while on the selection of AP fastboot and just shutdowns my phone. also one time it redirects me to one with a battery icon and a question mark.
I also don't have access to factory cable, can't buy one because it's not available in here in the Philippines, tried making one but I reaally suck at soldering, also when I opened up the wires, it only shows up 3 wires, red, green, and white, the other one I opened was only red and black.
TL;DR : Phone battery is dead, when plugged in charger, Motorola Razr Stuck on M logo (with Dual core technology). I also don't have access to factory cable, can't buy one because it's not available in here in the Philippines. Also there's no more Motorola stores that I can get a fix (I think they got bankrupt :silly
I really love this phone and I would really appreciate if I could get a quick fix
Sad, it seems that the questions here seldomly get answered, hope the experts go online soon
chrisora13 said:
Here's the story: I'll try to make it as short as possible (I'll also put on a TL;DR at the end)
My phone is rooted, flashed to Cyanogenmod 11 nightly build, no problems when I flashed these guys.
I installed Lucky Patcher to patch an app, put some files on my SD card (bunch of PSX games)
just put it out there if that changed anything
My battery was low at that time and I did not expect that if I let it shut down by itself, I could still open it just like I do in the past.
Phone totally has no charge on my battery 0%. I plugged in my charger, the phone opens up but it only opens the M logo with Dual core technology (not the pulsing M). Tried to charge it overnight, still stuck on dual core screen, tried resetting using Power + Volume Down, and also going through where AP fastboot, BP Tools was, If I choose any of them (except for fastboot) it would redirect me again to the dual core logo.
sometimes I get lucky if I choose BP tools and goes to TWRP recovery (safestrap installed), tried to boot there and still no luck.
also tried unplugging charger while on the selection of AP fastboot and just shutdowns my phone. also one time it redirects me to one with a battery icon and a question mark.
I also don't have access to factory cable, can't buy one because it's not available in here in the Philippines, tried making one but I reaally suck at soldering, also when I opened up the wires, it only shows up 3 wires, red, green, and white, the other one I opened was only red and black.
TL;DR : Phone battery is dead, when plugged in charger, Motorola Razr Stuck on M logo (with Dual core technology). I also don't have access to factory cable, can't buy one because it's not available in here in the Philippines. Also there's no more Motorola stores that I can get a fix (I think they got bankrupt :silly
I really love this phone and I would really appreciate if I could get a quick fix
Click to expand...
Click to collapse
It's OK don't worry. Just charge the phone for about two hours, unplug the carger and faster reset the phone wiht power + volume up + volume down. This way you can boot to safestrap. You will see that battery is on 0%, so plug the phone in the charger and wait. Until you are in safestrap the phone will charge. The battery needs at least 5% to boot the OS, I myself prefer to reach 20 even 30 percent. Then on safestrap's homescreen press reboot, then system and after the phone reboots wait or press search when safestrap's splash screen shows and the OS will load.
sui_iuris said:
It's OK don't worry. Just charge the phone for about two hours, unplug the carger and faster reset the phone wiht power + volume up + volume down. This way you can boot to safestrap. You will see that battery is on 0%, so plug the phone in the charger and wait. Until you are in safestrap the phone will charge. The battery needs at least 5% to boot the OS, I myself prefer to reach 20 even 30 percent. Then on safestrap's homescreen press reboot, then system and after the phone reboots wait or press search when safestrap's splash screen shows and the OS will load.
Click to expand...
Click to collapse
Thanks for the reply! I'll try that one out. I'll keep posted :fingers-crossed::laugh:
sui_iuris said:
It's OK don't worry. Just charge the phone for about two hours, unplug the carger and faster reset the phone wiht power + volume up + volume down. This way you can boot to safestrap. You will see that battery is on 0%, so plug the phone in the charger and wait. Until you are in safestrap the phone will charge. The battery needs at least 5% to boot the OS, I myself prefer to reach 20 even 30 percent. Then on safestrap's homescreen press reboot, then system and after the phone reboots wait or press search when safestrap's splash screen shows and the OS will load.
Click to expand...
Click to collapse
It Worked! Thank you so much for your help. The only problem I have now is that everytime I get my battery low, it doesn't go on charge mode when turned off. is there a fix in that? But overall, the trick that you thought me worked, and I'm using that trick when my battery gets low.
It seems hard to get a fix for this issue, so I used the app "Tablet Auto Power Off ★ root" and set the auto shut down when the battery reach 5%. It gives me enough power to restart the phone when I'm ready to charge it.
Hi , I had my Motorola Droid 4 XT894 by Verizon working until last week. One of my kids threw it on the floor.
The phone got stuck on Droid logo loop.
So I tapped into recovery, made the power+volume keys combo but it never went into recovery mode.
So I tried fastboot mode (power+UP+DOWN volume keys) I get into fastboot menu and selected fastboot menu option (so I can get this
phone to flash original stock rom back (which I downloaded from one of the threads here on XDA Developers, using rds lite 4.5).
But Battery being FULLY charged before the drop, showed me it needed more energy and won´t allow the flash.
3 hours later (trying to flash many other roms for 2.3 and 4.0, 4.1 and 4.4) battery went dead.
I hard wired red cable to positive and black cable to negative connectors in the non removable battery (as shown from a cut-usb cable on youtube) and plugged the device onto the wall to feed it power.
Battery never charged up a bit. Didn´t even warmed up. The only signal that energy is going through is that when I push the power button, it shows a white screen with a lot of little color pixels randomly scattered. There´s no text to read or sound to hear.
*Phone still gets recognized by computer on fastboot before and after the "half flash".
*Device is correctly identified when adb command: "fastboot devices" is typed.
QUESTION TIME:
If I buy a brand new original motorola battery - would my phone recognize it and ignite power on? or did I just lost a phone?
If I remove the screws and get the batt out and place it on those generic rechargeable phone battery-devices with tweezers, would it correctly charge?
Thank you community.
Regards.
Thanks.
main phase 2
got a radio-electronic guy. Charged the battery up to 4.2 (battery says that´s the fullest charge on the back label). So I guess I´m ready to go and flash original ROM.
I think I got one or 2 updates (I don´t recall the 4.0 upgrade, but I´ll say the original ROM should be: VRZ_XT894_6.7.2-180_DR4-16_M2-37_1FF.xml.zip
Right?
Working - Partially until reeboot
Hi Everyone. I successfully loaded in the battery with an all-night-charge with direct connection to the wall charger. So I ran RSD Lite, and flashed original stock ROM. It flashed sucessfully.
So YES, definitely a fully charged battery (hardwired) did allow for the full process to flash the entire rom into the phone.
I waited 15 full minutes until all 1 to 18 process were done. RSD showed: Now flashing files and reeboot.
The phone took another 7 minutes to get into android (and it also showed me : updating system files 1-of-69) and so it did. System loaded in correctly and I have all my OLD desktop icons and contacts and everything back. BATTERY is FULLY CHARGED. (it is shown on the screen).
So I press the power button to turn the phone off.
I turn it on again, and all I get now is a white screen with a lot of randomly scattered color pixels. Again the phone doesn´t do anything
and there´s no MOTO logo.
I´m going nuts now....how do I fix this?