i installed revohd7 and tried to convert back to revo 6 and now my is stuck at loading screen
i can only get to odin
plz help me asap i need a phone =[
tia
gdoh said:
i installed revohd7 and tried to convert back to revo 6 and now my is stuck at loading screen
i can only get to odin
plz help me asap i need a phone =[
tia
Click to expand...
Click to collapse
Go to www.sammobile.com, download a stock firmware and flash through Odin.
Sent from my Nexus 7 using xda premium
i really don't recommend downloading a stock firmware now, coz of this hard brick thingy, u can just flash a kernel . tar like siyah kernel and then entering recovery mode ( vol up + home+ power ) and wipe cache and data/fatory reset and dalvik cache ) then download a rom.zip and put it on ur external sd then install it via install zip from sdcard in siyah kernel recovery u've already installed
Tefanym said:
i really don't recommend downloading a stock firmware now, coz of this hard brick thingy, u can just flash a kernel . tar like siyah kernel and then entering recovery mode ( vol up + home+ power ) and wipe cache and data/fatory reset and dalvik cache ) then download a rom.zip and put it on ur external sd then install it via install zip from sdcard in siyah kernel recovery u've already installed
Click to expand...
Click to collapse
It's only the new 4.0.4 firmwares that you have to watch out for. And I believe it only gets triggered if you do a factory reset / wipe data.
Sent from my GT-I9100 using xda premium
Related
i have used the jb rom on my sg3, so far so good... when i try to go to a 4.0.4 rom, it stay stucked on the samsung logo...
how can i fully reset the phone on 4.0.4?
ichrypko said:
i have used the jb rom on my sg3, so far so good... when i try to go to a 4.0.4 rom, it stay stucked on the samsung logo...
how can i fully reset the phone on 4.0.4?
Click to expand...
Click to collapse
tried factory reset?
use your backup in recovery
ichrypko said:
i have used the jb rom on my sg3, so far so good... when i try to go to a 4.0.4 rom, it stay stucked on the samsung logo...
how can i fully reset the phone on 4.0.4?
Click to expand...
Click to collapse
You have to do a data wipe in recovery to fix that.
Do a full wipe. Factory reset + wipe cache, dalvik and system
Sent from my GT-I9300 using xda app-developers app
ichrypko said:
i have used the jb rom on my sg3, so far so good... when i try to go to a 4.0.4 rom, it stay stucked on the samsung logo...
how can i fully reset the phone on 4.0.4?
Click to expand...
Click to collapse
First step would be to do a full wipe I.e. data+cache+dalvik..if it does not work..then wipe system partition..be careful as this step will erase everything from your internal memory..
PS. Coming from leaked jb..install stock ics first via odin..reboot check if wifi works..if yes then go ahead and flash aosp based roms.. otherwise you might face wifi issues..
Sent from my GT-I9300 using xda app-developers app
ichrypko said:
i have used the jb rom on my sg3, so far so good... when i try to go to a 4.0.4 rom, it stay stucked on the samsung logo...
how can i fully reset the phone on 4.0.4?
Click to expand...
Click to collapse
Go to ClockWorkMod:
1- Turn off Your device
2- Press and hold this combination: up volume - menu button - power button
3- When you're in Clockwork mod search and choose factory reset4
4- Then confirm factory reset and use Pc Odin and flash a new ROM in Download Mode
Hope this helped
PS: Factory reset will erase everything So backup ur files, but in your case it's not necessary knowing that it's stuck in bootloader
Download mode for PC ODIN flash:
-turn off you device
-Download Mode: Press and hold :down volume button - menu button - power button
-After that connect ur device via USB to your PC
-choose the Stock Rom from Odin "DISABLE or UNCHECK REPARTITION"and and flash your device it'll take like 3mins or less to flash on SGS3
nhariamine said:
Go to ClockWorkMod:
1- Turn off Your device
2- Press and hold this combination: up volume - menu button - power button
3- When you're in Clockwork mod search and choose factory reset4
4- Then confirm factory reset and use Pc Odin and flash a new ROM in Download Mode
Hope this helped
PS: Factory reset will erase everything So backup ur files, but in your case it's not necessary knowing that it's stuck in bootloader
Download mode for PC ODIN flash:
-turn off you device
-Download Mode: Press and hold :down volume button - menu button - power button
-After that connect ur device via USB to your PC
-choose the Stock Rom from Odin "DISABLE or UNCHECK REPARTITION"and and flash your device it'll take like 3mins or less to flash on SGS3
Click to expand...
Click to collapse
This advice does not really help in my view .
Why factory reset then flash via Odin = wipe twice .
Odin does not have a stock rom . That may confuse the OP . >?> Its flash a stock rom via Odin .
jje
In my opinion the best option to restore stock firmware (and partition layout) is flashing three-file firmware by Odin with repartition option (and of course mx.pit). It will make all needed wipes after flash in recovery after selfreboot. All needed commands are set in executable script which is running after flashing. After that you may flash newest firmware by FOTA, Kies or Odin, as you wish.
All you need is download a correct for Your location version with separate PDA, CSC and MODEM and mx.pit.
Of course there is always a danger related to repartition so You need to do it with caution.
You DON'T need to flash the pit file unless you've somehow screwed up your partitions and have corrupted them. Flashing a pit file is one of the fastest ways to brick your phone if you don't know what you're doing and use the wrong one...
Just put the full stock update file in PDA and flash as it has the pit repartition in the file already. However, DON'T tick the repartition box...
watsa said:
tried factory reset?
Click to expand...
Click to collapse
zoot1 said:
First step would be to do a full wipe I.e. data+cache+dalvik..if it does not work..then wipe system partition..be careful as this step will erase everything from your internal memory..
PS. Coming from leaked jb..install stock ics first via odin..reboot check if wifi works..if yes then go ahead and flash aosp based roms.. otherwise you might face wifi issues..
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
ultramag69 said:
You DON'T need to flash the pit file unless you've somehow screwed up your partitions and have corrupted them. Flashing a pit file is one of the fastest ways to brick your phone if you don't know what you're doing and use the wrong one...
Just put the full stock update file in PDA and flash as it has the pit repartition in the file already. However, DON'T tick the repartition box...
Click to expand...
Click to collapse
tryied a factory reset and now restoring another rom to see if it works... the main issue is that it keep at the samsung logo after reboot. ok JB, any attempt of put the ccw makes the phone stuck on the boop on a vibrate loop (1 long/3 shorts)
I got this S2 from UK my brother sent it and he had installed custom ROM on it.
I did a factory reset on it and after that the device didn't start.
My bro told me to install Siyah Kernal to make it work again but unfortunately after installing the Kernal i am stuck in Resurrection Remix screen.
WHAT SHOULD I DO NOW?
kaiyan1 said:
I got this S2 from UK my brother sent it and he had installed custom ROM on it.
I did a factory reset on it and after that the device didn't start.
My bro told me to install Siyah Kernal to make it work again but unfortunately after installing the Kernal i am stuck in Resurrection Remix screen.
WHAT SHOULD I DO NOW?
Click to expand...
Click to collapse
download any rom you want like
CM10 or any other flash in recover then do a wipe
or flash stock rom via PC odin
kaiyan1 said:
I got this S2 from UK my brother sent it and he had installed custom ROM on it.
I did a factory reset on it and after that the device didn't start.
My bro told me to install Siyah Kernal to make it work again but unfortunately after installing the Kernal i am stuck in Resurrection Remix screen.
WHAT SHOULD I DO NOW?
Click to expand...
Click to collapse
Next time post questions in Q & A thread,, BTW dont panic. Download any ROM, then wipe data, cache and in advance, wipe dalvik, Install zip from SD card. Done ur phone ll boot up.. If this doesnt help then final is flash thru ODIN check the baseband of the phone then download from SAMFIRMWARE
After a full wipe (data/cache/dalvik), you should also format the /system partition and the internal SD card (save important files before). Then flash or install via recovery the ROM and everything should be ok.
Thank you everyone but when i press the power+volume dwn+home button it takes me to odin mode but not the normal screen from where i can wipe/format and do other stuff. How can i go to that recovery screen?
kaiyan1 said:
Thank you everyone but when i press the power+volume dwn+home button it takes me to odin mode but not the normal screen from where i can wipe/format and do other stuff. How can i go to that recovery screen?
Click to expand...
Click to collapse
It's volume up home and power to get into recovery
Sent from my GT-I9100 using xda app-developers app
kaiyan1 said:
Thank you everyone but when i press the power+volume dwn+home button it takes me to odin mode but not the normal screen from where i can wipe/format and do other stuff. How can i go to that recovery screen?
Click to expand...
Click to collapse
Volume up + home button + power button simultaneously. hold all of them until the samsung logo appears, then just leave the power button. Should boot into recovery.
Sent from my GT-I9100 using Tapatalk 2
Prashanthme said:
Next time post questions in Q & A thread,, BTW dont panic. Download any ROM, then wipe data, cache and in advance, wipe dalvik, Install zip from SD card. Done ur phone ll boot up.. If this doesnt help then final is flash thru ODIN check the baseband of the phone then download from SAMFIRMWARE
Click to expand...
Click to collapse
thank you for the help phone is up now
Hi I recently just installed clockworkmod by chainfire and now i'm trying to flash a rom ( http://forum.xda-developers.com/showthread.php?t=1844343 ) but when ever i go to install a zip from sd card i can't find the the rom zip file... any help?
Are u looking inte right place. Internal vs external sdcard?
i found it installed it and i think my phone is bricked now... it won't go past the galaxy i9100 screen... can you teach me how to flash stock rom or link me to some stock roms i can flash to?
http://forum.xda-developers.com/showthread.php?t=1075278
But have you done a wipe data/factory reset and cache from recovery?
If you flash a 4.0.4 samsung stock, beware of the 4.0.4 emmc brickbug. Google or xda search will get u tons of info about it.
BossStang said:
http://forum.xda-developers.com/showthread.php?t=1075278
But have you done a wipe data/factory reset and cache from recovery?
If you flash a 4.0.4 samsung stock, beware of the 4.0.4 emmc brickbug. Google or xda search will get u tons of info about it.
Click to expand...
Click to collapse
yes i have done wipe data factory reset and cache from recovery before flashing the rom but now i can't go into CWM anymore.. only odin
Ok. If you can access download mode just flash a stock rom with odin.
andyzeng1993 said:
yes i have done wipe data factory reset and cache from recovery before flashing the rom but now i can't go into CWM anymore.. only odin
Click to expand...
Click to collapse
so you are stuck in bootloop? go to download mode and flash a stock ROM/firmware (you can find it in sammobile.com), just flash it with odin and you are good to go..
maybe your download was incomplete, i suggest you redownload the ROM again
HELP needed ..!!
okay, so i followed this steps ( http://www.youtube.com/watch?v=7tgmmQgRrZw ) to unlock bootloader of my wt19i .. did it as it is shown .. now my phone is stuck in the logo sign when i'm trying to turn it on !! need help asap.
prds359 said:
HELP needed ..!!
okay, so i followed this steps ( http://www.youtube.com/watch?v=7tgmmQgRrZw ) to unlock bootloader of my wt19i .. did it as it is shown .. now my phone is stuck in the logo sign when i'm trying to turn it on !! need help asap.
Click to expand...
Click to collapse
Okay so here's a solution
1. Download flashtool first from here
2. Download ICS stock ftf from here
3. Now flash the ftf to your phone in FlashMode, when connected to PC
if any further query, let me know
Happy Flashing
thank u so much @Sangeet007 .. solved my purpose
Having another problem ..
didn't want to create another thread for this ..
so continuing here ..
Rooted completely & unlocked boot-loader of my wt19i ..
but CM 9.1 isn't installing ..
trying to flash it from CWM & it's showing
"E: Error in/sdcard/cm-9.1.0-coconut.zip
(Status 7) Installation aborted."
help needed ASAP ..
seems like if we don't create new thread, no one's going to notice !!!! :'(
HELP needed here ! please .!
Download the rom again and transfer it to your phone. Flash the kernel from inside the rom.zip, then flash the rom after performing wipe data/factory reset and wipe cache
Sent from my Nexus 4 running Android 4.3
facing the same problem! can it be done with any software like flashtool or such?
prds359 said:
facing the same problem! can it be done with any software like flashtool or such?
Click to expand...
Click to collapse
No, you have to flash it using cwm
Could it be you wiped /system before flashing? Because you shouldn't do that!
So there's the problem !!!
what i did -
wiped data/ factory reset
wiped cache partition
wiped dalvik cache ..
Solution please
prds359 said:
So there's the problem !!!
what i did -
wiped data/ factory reset
wiped cache partition
wiped dalvik cache ..
Solution please
Click to expand...
Click to collapse
After wiping delvic cache did u frmat the system ,data ,cache which located in the advanced tab ???
can u gve me the link that the rom ur trying to install??
*first flash the recommended kernal
*Wipe Data/Factory Reset
*Wipe Cache Partition
*Wipe Dalvik Cache
*Go to Mounts & Storage
*Format Data
*Format Cache
*Format System
*Install zip from sd card
**if isnt work this again please try to install anyother rom and see what happen ...
downloaded the file from the official site ( http://download.cyanogenmod.com/?device=coconut&type=stable )
1. no i didn't format the system after wiping dalvik cache.
2. from where & how do i flash the kernel? i have downloaded the ROM & the Gapps.!
prds359 said:
downloaded the file from the official site ( http://download.cyanogenmod.com/?device=coconut&type=stable )
1. no i didn't format the system after wiping dalvik cache.
2. from where & how do i flash the kernel? i have downloaded the ROM & the Gapps.!
Click to expand...
Click to collapse
The kernel is the boot.img inside the zip. If you want to know how to flash it, check my guide on how to install a custom rom/kernel
And you could do the following:
1. Open the zip
2. Go to META-INF/com/google/android/
3. Open the updater-script using notepad ++
4. Delete the first 3 lines saying "assert getprop"
5. Save it and repack the zip
6. Flash it
Maybe it works then! :good:
mihahn said:
The kernel is the boot.img inside the zip. If you want to know how to flash it, check my guide on how to install a custom rom/kernel
And you could do the following:
1. Open the zip
2. Go to META-INF/com/google/android/
3. Open the updater-script using notepad ++
4. Delete the first 3 lines saying "assert getprop"
5. Save it and repack the zip
6. Flash it
Maybe it works then! :good:
Click to expand...
Click to collapse
did exactly what was described to your link to flash the kernel ..
it was successful.. but my phone is stuck to the Logo when am trying to turn it on ..
another problem is, in CWM menu the back key (power button) isn't working at all ..
what should i do next?
have attached the error screen.
Then flash a another kernal ,stuck on the logo happens coz the flashed kernal didnt support very well for ur android version.
Sent from my WT19i using xda premium
can you please suggest me a good ROM & kernel for WT19i please?
i was trying CM 9.1
Kernal-rege,kappa,lupus
Rom-honami i1,flawless ICS,next gen 7rom
Sent from my WT19i using xda premium
Arrow11 said:
Kernal-rege,kappa,lupus
Rom-honami i1,flawless ICS,next gen 7rom
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
okay so i flashed this ( http://forum.xda-developers.com/showthread.php?t=2167119 ) kernal ..
phone still won't work after logo sign ..
and am unable to access phone's memory card. ..
pc is't detecting it anymore!
what to do now?
prds359 said:
okay so i flashed this ( http://forum.xda-developers.com/showthread.php?t=2167119 ) kernal ..
phone still won't work after logo sign ..
and am unable to access phone's memory card. ..
pc is't detecting it anymore!
what to do now?
Click to expand...
Click to collapse
when sony logo appears plz start to press vol- rapidly..u can acces to recovery there..in there u can mount ur sd card using mount and storage option .if u cant acces to recovery u should flash this kernal http://forum.xda-developers.com/showthread.php?t=1398910
i recovered most of 4ns using rege kernal
no progress with rage kernal too! stuck to logo sign.
phone was running well before flashing any kernal.
is there any way to take it back to that position again?
**phone is rooted & boot-loader is unlocked.
prds359 said:
no progress with rage kernal too! stuck to logo sign.
phone was running well before flashing any kernal.
is there any way to take it back to that position again?
**phone is rooted & boot-loader is unlocked.
Click to expand...
Click to collapse
Flash the stock rom in flashmode using flashtool. If you don't know how to do that, use the search
Sent from my Nexus 4 running Android 4.3
I just rooted my phone yesterday and i tryed to flash a new rom but it keeps on showing the start up screen for all my roms i tried to flash plz help
what to do
Tuyeni-boy said:
I just rooted my phone yesterday and i tryed to flash a new rom but it keeps on showing the start up screen for all my roms i tried to flash plz help
what to do
Click to expand...
Click to collapse
Install via CWM. Instructions can be found in CWM and ur ROM thread.
Sent from my frozen Penguin's Nexus 7 with frozen CM 10.2 using frozen Tapatalk 4.FORGOTTEN Pro
Flash a custom rom with cwm..
wipe your data/system first.
wipe catche
install from sd card (Flashable file must be store in root of your sdcard.)
wipe catche
wipe dalvik catche
Imp:
Make your currunt working rom backup before anything you do with your phone. it will save you.
Tuyeni-boy said:
I just rooted my phone yesterday and i tryed to flash a new rom but it keeps on showing the start up screen for all my roms i tried to flash plz help
what to do
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1552792
go to this post and flash the stock firmware via odin.
for installing custom rom, you will need root and cwm
go to recovery mode
choose install zip from sd card
choose the cwm file
this will install the cwm.
now wipe data and cache
go to advanced menu and wipe dalvik cache
then go to choose zip from sdcaed and select the rom
please make sure that you are using a proper custom rom file meant for your phone.
hit thanks if it helped