Hy everybody,
I can flash my X10 mini pro (U20i) with the sonyericsson tool and with the flasher.
I installed some firmwares but I get the same all the time.
The phone starts up to the start screen.
There I have to move the slider on the screen to unlock the phone.
But I cannot move it with the touchscreen.
And it seems the phone reboots after a while automatically.
What do I have to do to make it work?
I guess it can't be that all firmwares have the same problem.
And I read out the exact model of the phone with another tool. So I guess I used the right firmwares.
Markus
wizkoder said:
Hy everybody,
I can flash my X10 mini pro (U20i) with the sonyericsson tool and with the flasher.
I installed some firmwares but I get the same all the time.
...
What do I have to do to make it work?
I guess it can't be that all firmwares have the same problem.
And I read out the exact model of the phone with another tool. So I guess I used the right firmwares.
Markus
Click to expand...
Click to collapse
If you used the right firmwares depends on where you got them from
If you downloaded them from the x10mini dev section, they won't work, because the x10mini has a different touchscreen
So tell us which links you used, and maybe we can point you in the right direction
I tried this one e.g.:
http://forum.xda-developers.com/showthread.php?t=1125587
Because its a combination of flasher and firmware.
But it behaves like all others I used.
wizkoder said:
I tried this one e.g.:
http://forum.xda-developers.com/showthread.php?t=1125587
Because its a combination of flasher and firmware.
But it behaves like all others I used.
Click to expand...
Click to collapse
You can get it back on original firmware using SEUS or PC Companion?
When I flash it with the rom the original software (pc companion in repair mode) tells me it does not work either.
I would like to go back to 1.6 the telefone came with.
but it seems I can only get the update to 2.1.
And I tried with some xperia models like Xperia X10 mini pro and Xperia X10 mini.
wizkoder said:
When I flash it with the rom the original software tells me it does not work either.
I would like to go back to 1.6 the telefone came with.
but it seems I can only get the update to 2.1.
Click to expand...
Click to collapse
Hmmzzz, weird... you sure you have this phone?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Took 2 pictures of my phone (with my other xperia mini pro )
Wondering why the button son the side look different...
Un the inside it says U20i.
Please tell me what model that is..
wizkoder said:
Took 2 pictures of my phone (with my other xperia mini pro )
Wondering why the button son the side look different...
Un the inside it says U20i.
Please tell me what model that is..
Click to expand...
Click to collapse
Yes, that looks like the u20i, so that can't be the problem.
Were you on 1.6 when you tried flashing the custom ROMS you tried?
wizkoder said:
Took 2 pictures of my phone (with my other xperia mini pro )
Wondering why the button son the side look different...
Un the inside it says U20i.
Please tell me what model that is..
Click to expand...
Click to collapse
the buttons on the side look different because that isn't a closed X10 Mini Pro, it's a Mini
if you can try getting a logcat during boot - we can see if something isn't loading properly then
X10man
I did not check what version was installed when I reflashed it.
I thought it will work exactely the same way as with my other phone.
But I guess it was never changed so 1.6 should have been installed.
How would I get a rootcat while booting?
How could I get the logs from a phone that does not start?
Is there a tool where I can interact with the phone?
Like a remote shell?
Try this and click thx button: http://forum.xda-developers.com/showthread.php?t=1838242 ,,,,,,,check the 2nd post
Sent from my U20i using xda app-developers app
wizkoder said:
How could I get the logs from a phone that does not start?
Is there a tool where I can interact with the phone?
Like a remote shell?
Click to expand...
Click to collapse
ADB is android's debugging tool on the pc.
If you want a log of what happens when the phone starts use: adb logcat > log.txt with your phone connected via the usb-cable.
The log.txt will contain just about everything that happens after the kernel is loaded.
If your phone is stuck before the ROM gets loaded, try to redownload and reflash the kernel.
Related
last week I update my phone to 2.1 and today a new update released and I installed it on my phone (its a small update for 2.1) and my phone cant root. can any one help me. I try z4root 1.3 but not work and automaticaly closed. sorry for bad english
same here ..wat a dumb update .
try the x10 root for new 2.1 im sure it will work
its in the x10 android dev sub forum
yup thats confirmed that you wont be able to root it back because of that update i have mine too but luckily i made an image back-up of my phone...
thanks guys. I try any root software but not worked. :'(
reflash your phone. a quick solution for that
Sent from my U20i using XDA App
i save old firmware (2.1) files from SEUS (FILE_277662340) 12.4 mb and (FILE_277686183) 105 mb how can i flash this old 2.1 firmware files with x10flashtool to my phone please help me.
mmmh, updated my mini pro to 2.1 update 1 and z4root 1.3.0 works. my phone is rooted
FoCMB said:
mmmh, updated my mini pro to 2.1 update 1 and z4root 1.3.0 works. my phone is rooted
Click to expand...
Click to collapse
if you now check your phone for update with SEUS you see a new 2.1 firmware update ( its small update for root-proof )
seus said: "für ihr telefon ist keine neue software verfügbar" (no new software for your phone)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The aktuell buildnumber is: 2.0.2.A.0.24. I believe you have a previous Version on your Phone. Superoneklick, z4root and the exploit manual don't work for me.
this is possible. my buildnumber: 2.0.A.0.504 but seus and pc companion said, this is the last version for my phone (u20i). is it possible that there are different updates for different languages? i have a phone from se with german language without provider branding.
FoCMB said:
mmmh, updated my mini pro to 2.1 update 1 and z4root 1.3.0 works. my phone is rooted
Click to expand...
Click to collapse
last version update not workd... build number 2.0.2.A.0.24
OMG!!!!
guyz im stuck too plz help me to flash my firmware...plz help with tutorial
same like x10 new update 2.0.2.A.0.24. cannot root. same problem..
can we use debrand method with SEUS to restore old 2.1 firmware?
in my xperia mini10 i can root with z4root
Sent from my E10a using XDA App
Bergi84 said:
The aktuell buildnumber is: 2.0.2.A.0.24. I believe you have a previous Version on your Phone. Superoneklick, z4root and the exploit manual don't work for me.
Click to expand...
Click to collapse
me too i fell so sad when i know the truth that new update prevent rooting
same problem
i have the same problem. help me pls
Dude i think you should try again to update it to 2.1 version using Bin4ry flash tool...that will provide you root access.
Here's the link-:
Pro: http://forum.xda-developers.com/showthread.php?t=826455
Mini: http://forum.xda-developers.com/showthread.php?t=825664
In order to use the flasher just try these steps:
1)Download SEUS and Pc Companion and connect the phone with them at least once (just connect)
2)Make sure you have the latest java installed on your pc.
3)Download the flasher from Bin4ry (Just make sure you've downloaded the mini and not the mini pro edition).
4)Download from the same thread a Generic 2.0.A.0.504 FW and put the folder with the .sin files inside the flashtool's directory.
5)Run the flashtool, press flash and then choose the name of the folder, where the .sin files are in.
6)While the phone is off, keep the back button pressed and connect on usb until the green light is on.
(copied from another thread, all credits and thanks goes to pratyush_gamer)
First, sorry my bad english...
I NEED HELP
I tried to instal FROYO 2.2 in my device (Xperia X10 mini pro - U20i)
but, when i was following an tuto, I replaced an archive with name: BUILD.PROP
after, my device not turn!
in fact it turns on but does not leave the screen SONY ERICSSON logo.
I tried too restore the software from SEUS (Sony Ericsson Update Service)
but the program says me: there is no new software to your phone.
and he does not give me the option to restore the current software
And now, I don't know what I do!?
I lost my xperia?!
PLIZ HELP ME!!!
Pls dont add threads for such matters....use the search button and u will surely find a solution to the problem.
__________________
If you like my post, click the
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
button!!
Try using a flasher
qu31j1nh0 said:
First, sorry my bad english...
I NEED HELP
I tried trying to instal FROYO 2.2 in my device (Xperia X10 mini pro - U20i)
but, when i was following an tuto, I replaced an archive with name: BUILD.PROP
after, my device not turn!
in fact it turns on but does not leave the screen SONY ERICSSON logo.
I tried too restore the software from SEUS (Sony Ericsson Update Service)
but the program says me: there is no new software to your phone.
and he does not give me the option to restore the current software
And now, I don't know what I do!?
I lost my xperia?!
PLIZ HELP ME!!!
Click to expand...
Click to collapse
Try using a flasher, i think it would work
not work :{
BAD,
Flash not work too.
ERROR - Error flashing. Aborted
I tried many times, and not work too.
Try using SE flashing tool, it worked for me on getting my phone back. I never changed the Build.prop file like.
There was a way too on how to get back into Xrecovery Can't remember the steps he took like but i'll have a scan for the post and will add it here if it helps.
stetye said:
Try using SE flashing tool, it worked for me on getting my phone back. I never changed the Build.prop file like.
There was a way too on how to get back into Xrecovery Can't remember the steps he took like but i'll have a scan for the post and will add it here if it helps.
Click to expand...
Click to collapse
accidentally, I swapped the build.prop (U20i) by one of (U20a).
And now? What to do? I tried using the FlashTool, but got no success!
it gets stuck on logo screen SE
please someone help me to revive this phone! : (
qu31j1nh0 said:
accidentally, I swapped the build.prop (U20i) by one of (U20a).
And now? What to do? I tried using the FlashTool, but got no success!
it gets stuck on logo screen SE
please someone help me to revive this phone! : (
Click to expand...
Click to collapse
Take a look here http://forum.xda-developers.com/showthread.php?t=1040149.
It's xRecovery Working?, and btw, does not matters if you have U20i or U20a on system propierties, your device will still be a U20i, mine says U20i, and it's a U20a, and everything is working like a charm
D4rKn3sSyS said:
Take a look here http://forum.xda-developers.com/showthread.php?t=1040149.
It's xRecovery Working?, and btw, does not matters if you have U20i or U20a on system propierties, your device will still be a U20i, mine says U20i, and it's a U20a, and everything is working like a charm
Click to expand...
Click to collapse
This is another big problem!
The XRECOVERY is not working anymore after I did the debrand unsuccessful!
PLEASE HELP! : {
I'm looking for a desperate solution, but I can not find
qu31j1nh0 said:
This is another big problem!
The XRECOVERY is not working anymore after I did the debrand unsuccessful!
PLEASE HELP! : {
I'm looking for a desperate solution, but I can not find
Click to expand...
Click to collapse
Best idea its recovering through Flasher , download a older version. maybe it works, and dont worry, you will fix it, sry i need 2 go
D4rKn3sSyS said:
Best idea its recovering through Flasher , download a older version. maybe it works, and dont worry, you will fix it, sry i need 2 go
Click to expand...
Click to collapse
I'll try it now!
I'm downloading two versions (U20i) ...
this topic: http://forum.xda-developers.com/showthread.php?t=920746
Generic version 2.1update1 build 2.0.2.A.0.24
and
Generic version 2.1update1 build 2.0.A.0.504
posted by androxyde
test and then I'll post the results here!
ty 4 ur attention and patience
have a look at my thread
http://forum.xda-developers.com/showthread.php?t=1049108 it will get you into xRecovery on a bricked phone to restore a backup or whatever else you need
qu31j1nh0 said:
BAD,
Flash not work too.
ERROR - Error flashing. Aborted
I tried many times, and not work too.
Click to expand...
Click to collapse
How could this be possible?!
Sent from my U20i using XDA Premium App
http://forum.xda-developers.com/showpost.php?p=11856048&postcount=4 i think this might help you, had a problem with bootloop this is the way i fixed it. Hope you get it unbricked
Hi Guys,
I making a last attempt to get an old X10 working before I strip it for parts. If anybody has any new ideas, I'll give them a try otherwise I'm going to dismantle it to use the case and screen to pretty up my working X10 (dents and scratches).
History:
About a year ago, it started acting up and overheating on occasion and even at times it wouldn't charge.
After a couple weeks of this, one day it started freezing up on me. After I powered down it wouldn't restart. Dealing with tech support I tried using PC Companion and SEUS to try and repair the phone but flashing would always abort.
I've tried various versions of Flashtool and SEUS as they have been released and still haven't been able to get the phone to boot. PC Companion and SEUS always error out when trying to flash and Flashtool even though it completes will give a yellow triangle with exclamation point in it.
The one exceptions is when I flashed the newest X10a firmware with flashtool but unchecked the wipe userdata box. When I do this the phone will actually boot past the Sony Ericsson screen and perform the boot animation but... This is where it get's stuck and just loops the boot animation over every couple of minutes.
The only other piece of information that I can provide is that even though Flashtool will report a successful flash the complete firmware package including userdata, I believe that userdata is failing because of a timeout. Flashtool will sit on flashing userdata for about 5 minutes before completing.
after you flash the new x10 firmware you need to flash the new kernel and radio too!
that should stop the boot loop and maybe get it running again
you can find the radio and kernel ftf in the dev forum
scoobysnacks said:
after you flash the new x10 firmware you need to flash the new kernel and radio too!
that should stop the boot loop and maybe get it running again
you can find the radio and kernel ftf in the dev forum
Click to expand...
Click to collapse
When you flash the full ftf package with flashtool, the baseband (radio) and kernel are included. But..... Just in case I did try to flash the .71 package but it didn't make any difference.
brutal
did you try a seus when you got to the bootloop?
sounds like a probable motherboard issue
scoobysnacks said:
brutal
did you try a seus when you got to the bootloop?
sounds like a probable motherboard issue
Click to expand...
Click to collapse
Yep, SEUS just fails to complete flashing the phone, I've just about given up on it. Last thing I'm going to try tonight is reseating all the modules inside it. Who knows, Maybe I'll do a tear down post while I'm at it. At the very least I'll have a collection of spare parts for my working X10
x10 runs extremely hot.
a lot of people here had motherboard issues
scoobysnacks said:
x10 runs extremely hot.
a lot of people here had motherboard issues
Click to expand...
Click to collapse
Ya, this was an early model x10a from when Rogers first introduced them.
Sent from my X10i using xda premium
Ok, figured out how to dissassemble the X10 using this guide and this is what I have laying out in front of me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'll try to reassemble it and if it goes OK, I'll go ahead and replace the display/touch panel on my working X10 with this one.
GreatBigDog said:
Ok, figured out how to dissassemble the X10 using this guide and this is what I have laying out in front of me.
I'll try to reassemble it and if it goes OK, I'll go ahead and replace the display/touch panel on my working X10 with this one.
Click to expand...
Click to collapse
Nice pic, lol.
Ok, transplant worked. I now have the guts from my working x10 inside the undented and non scratched case of the one with the bad main board.
It's almost like having a new phone again.
Sent from my X10i using xda premium
it's dissapear on my phone today, althought my device has been Unlocked Bootloader and rooted so i tried to installed it and, of course, my phone has bricked.
i have just flash my phone (with ULBL & root) and it's disspear again, but i'm not dare to install it again.
what updates ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[XP] New OTA update for 6.2.A.1.100
picture links
i6.upanh.com/2013/0726/13//56957541.screenshot20130726200324.png
boylklk9515 said:
it's dissapear on my phone today, althought my device has been Unlocked Bootloader and rooted so i tried to installed it and, of course, my phone has bricked.
i have just flash my phone (with ULBL & root) and it's disspear again, but i'm not dare to install it again.
what updates ?
Click to expand...
Click to collapse
Hey bro, what do you exactly want? Your image is not appearing, try re-uploading it. And if you are asking how to unbrick the phone, then just flash a stock ROM using the flashtool by connecting the phone in fastboot mode. Or if you are asking how to install the update, then you will have to download the FTF and flash it using flashtool. But then you will loose root access. No worries, root it again using the root toolkit bu DoomLord, it's available in the development section. Or if you mean to say something else, feel free to reply.
boylklk9515 said:
picture links
i6.upanh.com/2013/0726/13//56957541.screenshot20130726200324.png
Click to expand...
Click to collapse
Xperia p new update
moli2398 said:
Hey bro, what do you exactly want? Your image is not appearing, try re-uploading it. And if you are asking how to unbrick the phone, then just flash a stock ROM using the flashtool by connecting the phone in fastboot mode. Or if you are asking how to install the update, then you will have to download the FTF and flash it using flashtool. But then you will loose root access. No worries, root it again using the root toolkit bu DoomLord, it's available in the development section. Or if you mean to say something else, feel free to reply.
Click to expand...
Click to collapse
thanks, but i can not post picture link now , my second post is my picture link you can see it ? and i want to know what updates are there? just 87,5 MB!
boylklk9515 said:
thanks, but i can not post picture link now , my second post is my picture link you can see it ? and i want to know what updates are there? just 87,5 MB!
Click to expand...
Click to collapse
You are mistaken. The update is of huge 650MB. But I upgraded to it from ICS. So maybe if you are on JB you will find this a short update.
The update have minor bug fixes and the phone is less laggy now. The dialer scroll issue is gone. But there's a problem with the camera app now. Sometimes green and black lines come on to the screen while clicking the photo. Although they don't appear on the photo. I am facing GPS and network issues also. But they are not being experienced by everyone. Feel free to update because you can always flash the old ROM.
album and walkman
moli2398 said:
You are mistaken. The update is of huge 650MB. But I upgraded to it from ICS. So maybe if you are on JB you will find this a short update.
The update have minor bug fixes and the phone is less laggy now. The dialer scroll issue is gone. But there's a problem with the camera app now. Sometimes green and black lines come on to the screen while clicking the photo. Although they don't appear on the photo. I am facing GPS and network issues also. But they are not being experienced by everyone. Feel free to update because you can always flash the old ROM.
Click to expand...
Click to collapse
thanks alot
i think i have found it, maybe Album and Walkman
yes, i know !
Hello people,
i hope the model is on the right thread.
Im Daniele from italy. I have this box and is stuck on logo android. I try to reset it or change the power supply. But not fix.
I read something about to flash the firmware (two methods) can you explain me and give me the right FW?
here you can see the picture of mainboard.
https://photos.app.goo.gl/R2V2zKzBdcQiHq6u6
https://photos.app.goo.gl/7Z69DR6dfbxZt4oR8
Yiu can try my custom android TV 9.0 Rom for s905w devices, based on official mi box firmware so is fast and stable l https://aidansrom.wordpress.com
Thanks for reply. Are you sure your FW is compatible? How can understand if is compatible. Is not better flash original FW?
Benz83 said:
Thanks for reply. Are you sure your FW is compatible? How can understand if is compatible. Is not better flash original FW?
Click to expand...
Click to collapse
there is no 100% Sure Way to know if its deffinatley compatible, with amlogic chips (like the s905w) can usally install each others firmware as long as the Chip matches (s905w roms on s905w chips) they will usally all boot up but things like wifi, bluetooth & IR Remote may not work so then its would be a case of try another rom, I have 4 versions for s905w with diffrent wifi & remote configurations so it's a case of try them and see what works for you, and i will still be releasing updates with more wifi chips ect soon, if you work with me no doubt we can get thing up and running well for you
ok man, you convinced me. i downloaded 3. [S905W] [UNTESTED] [w03] Aidan's Custom ROM [v3]
i will let you know
Benz83 said:
ok man, you convinced me. i downloaded 3. [S905W] [UNTESTED] [w03] Aidan's Custom ROM [v3]
i will let you know
Click to expand...
Click to collapse
Good Luck
V4 Uploading Now As Well With NTFS USB HDD/Stick Fix if this is something important to you & Also V3 will now say there is an update available, You Will Have To Download my v4 Manually To Update (Baisically its trying to install the Official Mi Box S Update But Because We Are Not Running On Official Mi Box Hardware The Update Will Fail) Once I Know a New Version For The Mi Box is Released I Can Download It From My Device And Modify it To Run On Our Devices, i Aim To Update To The Latest Mi Box Firmware Within a Week Of The Update Being available For Official Mi Box Devices
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Benz83 said:
View attachment 5159317
Click to expand...
Click to collapse
V4 Uploaded, There Are 4 Versions to try
https://drive.google.com/drive/folders/13k5wx9zqHRV_7R5kfwHcLxPdb1cYMC1U?usp=sharing
Maybe its me or maybe something strange. I try to use the last version, so i installed the usb burning tool 3.1, after check image open the version 2.1.8.
I uninstall the old version.
However, i try several fw, also others find on web, same error
It happened to me when flashing tanix tx9s.
I think the tool checks the img file and determines whether to use the latest or an older version.
The flashing went fine for me.
Benz83 said:
Maybe its me or maybe something strange. I try to use the last version, so i installed the usb burning tool 3.1, after check image open the version 2.1.8.
I uninstall the old version.
However, i try several fw, also others find on web, same error
Click to expand...
Click to collapse
Try these Stock Roms
https://drive.google.com/file/d/1Q3vsCniqs-Aq7fiFz8LQ3aBbyYdIOsm4/view
https://drive.google.com/file/d/1fea3eqLRzG42ydB1DC9DjlbgDKnBISW1/view
thanks a lot, but nothing to do. Other solution?
A method to reset nand flash? i saw something about pinout