I just noticed that my camera glass was broken and i would love to replace it so does anyone know where i can buy one ?
Try using this!
slaphead20 said:
Try using this!
Click to expand...
Click to collapse
But it isnt the lens thats broken but the glass thats part of the middle casing i was considering ordering one from ebay and taking the glass out of it as the whole module contains gsm and bluetooth anteena and by replacing it with a non original( dont know if it's genuine) could make the preformance worse
Related
Hi,
My ray's camera protector glass was dirty. (scratch)
Can i change it? Where can i buy this glass?
woofgoo said:
Hi,
My ray's camera protector glass was dirty. (scratch)
Can i change it? Where can i buy this glass?
Click to expand...
Click to collapse
I 've replaced it with one from an old samsung phone(i don't remember rhe type),the size is near the same,plus it is of glass not plastic and the pictures taken seems better than before...
Inviato da me!
arcatarc said:
I 've replaced it with one from an old samsung phone(i don't remember rhe type),the size is near the same,plus it is of glass not plastic and the picture sems better..
Inviato da me!
Click to expand...
Click to collapse
I forgot to ask.
How can i remove that?
woofgoo said:
I forgot to ask.
How can i remove that?
Click to expand...
Click to collapse
it's very easy: infact it is fixed with a double-sided ring tape.
I've used a blade to remove it and i replaced the glass(plastic)with the one (glass)of an old phone similar to this:
Im trying to find where to buy the silver frame for this phone, anyone know where to find it?
The instructions is good for changing the glass but i cant find any good for changing the frame, anyone knows if there are some instructions for this operation?
Google "s3 tear down video"
You will also need to replace the glass
Sent from my GT-I9300 using Tapatalk 2
get the bezel on eBay.
@rootSU you sure about that?
Glebun said:
get the bezel on eBay.
@rootSU you sure about that?
Click to expand...
Click to collapse
Is this what you mean? ebay.com/itm/Housing-Frame-Front-Bezel-Cover-For-Samsung-Galaxy-S3-i9300-White-/330943326960?pt=US_Cell_Phone_Replacement_Parts_Tools&hash=item4d0dc26af0
If it's suffering from scratches, you can use a sliver sharpie to cover it pretty well. Much easier and cheaper
AthenaLod said:
If it's suffering from scratches, you can use a sliver sharpie to cover it pretty well. Much easier and cheaper
Click to expand...
Click to collapse
Thats probably why its hard to find information about it, its to coplicated and expensive..
Du you know any specific pen that works...
Glebun said:
get the bezel on eBay.
@rootSU you sure about that?
Click to expand...
Click to collapse
Yep. Unless the new bezel comes with glass already. Removing the glass from the existing bezel (or middle plate) breaks it
Sent from my GT-I9300 using Tapatalk 2
Yes I confirm that to have a new bezel you need to buy a whole glass+LCD+bezel pack as all those parts are glued together. To change the bezel you would have to remove the digitizer+LCD, meaning destroying them. That's what I did to repair my broken screen some months ago.
So it's about 140$ I guess.
The amoled too? Jeez
Sent from my GT-I9300 using Tapatalk 2
seven01 said:
Thats probably why its hard to find information about it, its to coplicated and expensive..
Du you know any specific pen that works...
Click to expand...
Click to collapse
I saw a video a few weeks ago (that I can't find now). But, and I think just a regular silver sharpie. I am going to buy one and use it on my own as it's also suffering from scratches.
Hi guys!
I have i9100P on which the front glass is broken. The screen and digitizer work perfectly, so I thought why shouldn't I try to just replace the front glass.
I know that it is really difficulty, but I can't lose anything other than my time.
The only problem is I don't know which kind of a glue I should use to glue new front glass. Any suggestions?
xx77aBs said:
Hi guys!
I have i9100P on which the front glass is broken. The screen and digitizer work perfectly, so I thought why shouldn't I try to just replace the front glass.
I know that it is really difficulty, but I can't lose anything other than my time.
The only problem is I don't know which kind of a glue I should use to glue new front glass. Any suggestions?
Click to expand...
Click to collapse
Ehy man this is I9000/9001 section ..
It's better that you look for your phone's section in the forum
Inviato dal mio GT-I9001 con Tapatalk 2
Close Enough. Lol
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
Yeah, I was in a hurry and I didn't notice that I was in i9000 section... thanks, I've reported this topic
xx77aBs said:
Hi guys!
I have i9100P on which the front glass is broken. The screen and digitizer work perfectly, so I thought why shouldn't I try to just replace the front glass.
I know that it is really difficulty, but I can't lose anything other than my time.
The only problem is I don't know which kind of a glue I should use to glue new front glass. Any suggestions?
Click to expand...
Click to collapse
Well got no idea where U located but Pratley Glass works well as it sets clear and is extremely strong. Hope it helped.
SmittyXU said:
Well got no idea where U located but Pratley Glass works well as it sets clear and is extremely strong. Hope it helped.
Click to expand...
Click to collapse
Thanks, I'll try to find something similar I've also gotten some kind of glue with the glass, I'll try it out.
Hello everyone,
Today I wanted to test a pencil on my device.
I tried to make the pencil itself very soft.
I made no pressure on the surface of the screen.
Now I have additional scratches.
(I got already some before)
I also have a begining of removal of the coating.
What should I do now ?
Contact Sony and ask for replacelemt of the filter ?
Buy a filter and remove the stock filter and put this one ?
What have I to do ? (I never put it outside from home)
Is this one is alright ?
http://www.befr.ebay.be/itm/Genuine...esCasesPouches&var&hash=item338af4aa42&_uhb=1
(I will remove the old asf)
and this one is alright ?
http://www.befr.ebay.be/itm/Tempere...ptopAccessories_RL&hash=item417f0926e8&_uhb=1
wich one do I need to order ? (I'm ligin in Belgium)
is there any that worth it ?
If the scratch is not obvious,better don't change.
Both is glass,I think no difference between them.
With the tempered glass installed,the pencil input may not work correctly.
And warranty will void once you remove the front anti shattered film.
Sent from my C6833_GPe using XDA Premium 4 mobile app
atrix2 said:
If the scratch is not obvious,better don't change.
Both is glass,I think no difference between them.
With the tempered glass installed,the pencil input may not work correctly.
And warranty will void once you remove the front anti shattered film.
Sent from my C6833_GPe using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hello,
how looks your device ?
I used my Z Ultra for a little over a week before putting a screen protector on it. This resulted in small scratches to asf, after putting the wet apply protector on the scratches were not noticeable.
adfurgerson said:
I used my Z Ultra for a little over a week before putting a screen protector on it. This resulted in small scratches to asf, after putting the wet apply protector on the scratches were not noticeable.
Click to expand...
Click to collapse
I bet that the rate of the feedback has been considerably decreased a lot... no ?
In my case, I will soon, in some months replace the stock film by another one, like a GLASS-M product, or a iLLumishield... but isn't available in europe...
DIGITALIZOR said:
I bet that the rate of the feedback has been considerably decreased a lot... no ?
In my case, I will soon, in some months replace the stock film by another one, like a GLASS-M product, or a iLLumishield... but isn't available in europe...
Click to expand...
Click to collapse
The touch response and sensitivity are still fine.
DIGITALIZOR said:
I bet that the rate of the feedback has been considerably decreased a lot... no ?
In my case, I will soon, in some months replace the stock film by another one, like a GLASS-M product, or a iLLumishield... but isn't available in europe...
Click to expand...
Click to collapse
Get this ----> http://glass4m.com/collections/sony/products/mocolo-for-sony-xperia
Don't even buy a different one. The mocolo one feels like a stock Z2 screen.
Hello, where can I find a replacement of the rear camera for the Moto G4 XT1622? I did'nt find anything searching on google...
The Moto G4 Plus one works on the non-plus version?
Thanks and sorry if my english is bad.
I'm looking for the same
http://www.witrigs.com/oem-camera-glass-lens-for-motorola-moto-g4-plus
with instruction video on how to replace it.
interesting DIY and another option to purchase.
https://www.youtube.com/watch?v=EJY24sSBpJc
also, there already is a thread with the same question. No need to create a new one.
cheers
Replacement Camera
I guess the only option available is Moto Service Centre. They replace genuine parts, but price is little high.
hitendraprakash said:
I guess the only option available is Moto Service Centre. They replace genuine parts, but price is little high.
Click to expand...
Click to collapse
So why the genuine glass cover got scratches? I have personally ordered replacement glass from Amazon.in for about Rs. 400 and it is much better than stock glass.
If you want to spend more like Rs. 1200-1500 go for a service centre repair.
This one should fit you right
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.in/ulk/itm/122619834953
-sarang- said:
This one should fit you right
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.in/ulk/itm/122619834953
Click to expand...
Click to collapse
Cleaning glass with petrol with a bit rough cloth will solve the purpose easily....I did for mine....
It actually cleans the oleophobic coating...
Hello everyone,
I had the same problem of blurry camera it was caused due to scratches on the oleophobic coating on the camera lens.
I would not recommend you to replace lens (if u want u can get it on Amazon for around 200-250rs in India) as replacement lens might have the same problem of scratches after some time.
Instead I had used rust removal paste to get rid of scratches. After using it my camera is Crystal clear. Before that I had tried using pepsodent toothpaste it didn't work. I even tried sharp object to scrape the coating it didn't work. So the best solution to the problem is to use rust removal paste with tissue paper or cloth to rub over the lens within one minute all scratches disappear.
Hit the thanks if my solution worked for u.
tauqeerkhan said:
Hello everyone,
I had the same problem of blurry camera it was caused due to scratches on the oleophobic coating on the camera lens.
I would not recommend you to replace lens (if u want u can get it on Amazon for around 200-250rs in India) as replacement lens might have the same problem of scratches after some time.
Instead I had used rust removal paste to get rid of scratches. After using it my camera is Crystal clear. Before that I had tried using pepsodent toothpaste it didn't work. I even tried sharp object to scrape the coating it didn't work. So the best solution to the problem is to use rust removal paste with tissue paper or cloth to rub over the lens within one minute all scratches disappear.
Hit the thanks if my solution worked for u.
Click to expand...
Click to collapse
Where i can get rust remover paste please provide link.
vikasb32 said:
Where i can get rust remover paste please provide link.
Click to expand...
Click to collapse
You can also use metal polish(grainier) or car polish.