Related
my dopod 818 pro cant connect to my laptop using bluetooth serial port.can anyone who is familiar with this way help me ?
i can detect my laptop n followed all the direction in activesync's help note but it still cant connect..im receiving a message saying that d COM port that ive chosen is used by other application...i checked it again n again but none is using them..please help,...
ADDITION :
ive been searchin thru out xda wiki about upgrading n flashing roms..n i got some questions that are still not answered n confused
1. if want to flash my locked g4 prophet with other roms, what TOOLS/software should i prepare in advance ?
2. is flashing roms like reinstalling PC with different OS ? n i will lost the files in d main memory ?
3. n i cant find d download section in xda developers...
anyone kindly pls help me thanks
for two days I finally got my bluetooth-activesync to work, which just wouldn't want to work in the past. remove the bluetooth dongle, search google for a howto about how to make old devices visible inside the windows device manager, remove everything bluetooth related, com ports, the devices and the network related stuff. then reinstall the bluetooth dongle, let windows install all the driver . when this is finished you can follow the procedure described in the activesync helpfile about how to create an outgoing com port etc.
you should be just fine, as I said I could never make it work until I cleared out all the junk that windows likes to collect and carefully hides from you ;-) thats windows folks.
hope this will work for you,too.
thanks for the message, but i cant find the article on google..im using a built in bluetooth btw.....can u PM me with the directions ? really appreciate it if u can help...
To the Guy with the bluetooth sycronization problem. yes it does work on the s200. I am using it now.
Here is how to do it for windows XP.
1.disconnect your phone from your pc if it is connected.
2. Find the bluetooth icon in the windows control panel and open it.
3. Under the device tab if you see your phone delete it.
4.under the Options tap check the turn discover on box. The other 3 should already be checked.
5.go to the COM Ports tap and click add.
6.select Incoming (divice initiates the connection ) and click ok.
7. Look at the the com port # given in the table. And write it down.
8. Click ok and close the bluetooth devices window.
9.right click the ActiveSync icon on
Your system tray and click on connection settings.
10.check the allow connections to one of the following check box. And in the drop down right below it pick the same com port as the one you had written down.
11. Click ok to close the connection settings window
12. Open activeSync on your phone. (i made a short cut to it in my start menu.)
13. Click menu and click on connect via bluetooth.
14. You mite be asked to make a bluetooth partnership on your phone. Click yes.
15.click new partnership on your phone. Then click your pc from the list when you see it.
16. Then click next.
17. Enter a pass key on your phone.
Click the bluetooth icon on your pc and enter the same pass key.
18. Click next and finnish on your pc and when asked do the same on your phone.
19. Now it is set to setup to use activeSync via bluetooth.
20. To use it. open activeSync on your phone. Click menu and click connect via bluetooth. That should get you on.
G40 said:
To the Guy with the bluetooth sycronization problem. yes it does work on the s200. I am using it now.
Here is how to do it for windows XP.
1.disconnect your phone from your pc if it is connected.
2. Find the bluetooth icon in the windows control panel and open it.
3. Under the device tab if you see your phone delete it.
4.under the Options tap check the turn discover on box. The other 3 should already be checked.
5.go to the COM Ports tap and click add.
6.select Incoming (divice initiates the connection ) and click ok.
7. Look at the the com port # given in the table. And write it down.
8. Click ok and close the bluetooth devices window.
9.right click the ActiveSync icon on
Your system tray and click on connection settings.
10.check the allow connections to one of the following check box. And in the drop down right below it pick the same com port as the one you had written down.
11. Click ok to close the connection settings window
12. Open activeSync on your phone. (i made a short cut to it in my start menu.)
13. Click menu and click on connect via bluetooth.
14. You mite be asked to make a bluetooth partnership on your phone. Click yes.
15.click new partnership on your phone. Then click your pc from the list when you see it.
16. Then click next.
17. Enter a pass key on your phone.
Click the bluetooth icon on your pc and enter the same pass key.
18. Click next and finnish on your pc and when asked do the same on your phone.
19. Now it is set to setup to use activeSync via bluetooth.
20. To use it. open activeSync on your phone. Click menu and click connect via bluetooth. That should get you on.
Click to expand...
Click to collapse
Thanks man. Now it works .
G40 said:
To the Guy with the bluetooth sycronization problem. yes it does work on the s200. I am using it now.
Here is how to do it for windows XP.
1.disconnect your phone from your pc if it is connected.
2. Find the bluetooth icon in the windows control panel and open it.
3. Under the device tab if you see your phone delete it.
4.under the Options tap check the turn discover on box. The other 3 should already be checked.
5.go to the COM Ports tap and click add.
6.select Incoming (divice initiates the connection ) and click ok.
7. Look at the the com port # given in the table. And write it down.
8. Click ok and close the bluetooth devices window.
9.right click the ActiveSync icon on
Your system tray and click on connection settings.
10.check the allow connections to one of the following check box. And in the drop down right below it pick the same com port as the one you had written down.
11. Click ok to close the connection settings window
12. Open activeSync on your phone. (i made a short cut to it in my start menu.)
13. Click menu and click on connect via bluetooth.
14. You mite be asked to make a bluetooth partnership on your phone. Click yes.
15.click new partnership on your phone. Then click your pc from the list when you see it.
16. Then click next.
17. Enter a pass key on your phone.
Click the bluetooth icon on your pc and enter the same pass key.
18. Click next and finnish on your pc and when asked do the same on your phone.
19. Now it is set to setup to use activeSync via bluetooth.
20. To use it. open activeSync on your phone. Click menu and click connect via bluetooth. That should get you on.
Click to expand...
Click to collapse
Thank you. It works on my TD2.
I was looking for a way to do quick GPS when I am on a trip in a hotel room with cabled internet connection only.
Is there an apk or other mod out there that adds genuine USB tethering to the Vibrant on JI6? The myTouch3G just got a 2.2 update that adds an option to tether under "Wireless and Network Settings".
I don't want apps, and I don't want paid programs running, I just want a native USB tethering solution. None of this Wifi bs either, I need a desktop PC online, NOT my laptop.
Thanks
Mobileap
Sent from my SGH-T959 using XDA App
Sorry, my mistake, didn't notice the usb portion
Sent from my SGH-T959 using XDA App
Eugenes key mapped froyo has native USB Tethering but that rom kills battery life like crazy .
You can do USB tethering through Dial Up Networking. Install the Samsung drivers, enable USB debugging on the phone, then create a DUN connection in Windows. You have to add this string into the initialization settings of the modem:
AT+CGDCONT=1,"IP","epc.t-mobile.com"
johnnycs said:
You can do USB tethering through Dial Up Networking. Install the Samsung drivers, enable USB debugging on the phone, then create a DUN connection in Windows. You have to add this string into the initialization settings of the modem:
AT+CGDCONT=1,"IP","epc.t-mobile.com"
Click to expand...
Click to collapse
I was using that on JFD, but it's broken now on JI6. On JI6, it just breaks the data connection and I have to power-cycle my Vibrant to get it back.
johnnycs said:
You can do USB tethering through Dial Up Networking. Install the Samsung drivers, enable USB debugging on the phone, then create a DUN connection in Windows. You have to add this string into the initialization settings of the modem:
AT+CGDCONT=1,"IP","epc.t-mobile.com"
Click to expand...
Click to collapse
Or buy Cradlepoint CTR-500 (make sure the latest firmware installed) and tether right away.
Theres apps like easy tether and pda net those are usb tether
Sent from my SGH-T959 using XDA App
rexyboy10 said:
Sorry, my mistake, didn't notice the usb portion
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Where ????? i dont see it, have been looking for it for a while.
sTyLeSz said:
Theres apps like easy tether and pda net those are usb tether
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
As I mentioned in my OP, I didn't want to have a program running on the desktop.
There are threads in general for doing it. The computer sees it as a dialup connection. I didn't even have to install drivers on osx or linux. Windows needs the drivers, but no apps.
raduque said:
Is there an apk or other mod out there that adds genuine USB tethering to the Vibrant on JI6? The myTouch3G just got a 2.2 update that adds an option to tether under "Wireless and Network Settings".
I don't want apps, and I don't want paid programs running, I just want a native USB tethering solution. None of this Wifi bs either, I need a desktop PC online, NOT my laptop.
Thanks
Click to expand...
Click to collapse
What do you mean wifi? Is that the one that would connect desktop PC to wifi router?
What app your using for that? MobileAP doesn't let me us the wifi.
Or you could just flash eugenes jpm froyo port. Its super nice even if it is a battery hog.
Sent from my SGH-T959 using XDA App
E
wildklymr said:
Or you could just flash eugenes jpm froyo port. Its super nice even if it is a battery hog.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Eugene just release a revised version of froyo and has the battery and data issues fixed im running it now .
Sent from my GT-I9000 using XDA App
ttabbal said:
There are threads in general for doing it. The computer sees it as a dialup connection. I didn't even have to install drivers on osx or linux. Windows needs the drivers, but no apps.
Click to expand...
Click to collapse
Hi ttabbal, what did you do to get it running in linux. I thought one would just enable debugging, plug it in and automatically tethering begins.
Could you explain a lil further.
Thanks in advance
raduque said:
Is there an apk or other mod out there that adds genuine USB tethering to the Vibrant on JI6? The myTouch3G just got a 2.2 update that adds an option to tether under "Wireless and Network Settings".
I don't want apps, and I don't want paid programs running, I just want a native USB tethering solution. None of this Wifi bs either, I need a desktop PC online, NOT my laptop.
Thanks
Click to expand...
Click to collapse
EDIT: Just noticed my comment was not helpful.
my apologies.
ttabbal said:
There are threads in general for doing it. The computer sees it as a dialup connection. I didn't even have to install drivers on osx or linux. Windows needs the drivers, but no apps.
Click to expand...
Click to collapse
Yeah, I was doing that on JFD (shipping firmware) but it's broken on JI2/4/6. Querying the modem gives back a "Success" reply, but trying to initialize it fails - it also kills the data radio on the phone till you reboot the phone, too.
Dial-up networking still works on mine, and I'm on the latest OTA, JI6. I'm using it to tether to my XP computer via a usb cable.
Step 1 - install Samsung drivers (instructions abound, run a search)
Step 2 - set to USB Debugging Mode
Step 3 - Plug in phone (wait for all drivers to install, now that the phone is plugged in;
Step 4 - In Windows XP, go to Start, Control Panel, Network Connections
Step 5 - Select Create a New connection from the menu on the left
Step 6 - Select, Next, Next, 'Setup my connection manually,' Next,
Step 7 - check only the box next to Samsung Android USB Modem, Next, name it whatever you like
Step 8 - Enter '*99#'
Step 9 - Next
Step 10 - Populate username as 'wap' and password with 'password'
Step 11 - uncheck the bottom checkbox
Step 12 - Next and/or Finish
Step 13 - Close the pop-up window that comes up.
Step 14 - Return to Control Panel
Step 15 - Double-click 'Phone and Modem Options'
Step 16 - Select the 'Modems' tab
Step 17 - Select the Samsung Android USB Modem that you selected in Step 7
Step 18 - Click 'Properties,' click the 'Modem' tab,
Step 19 - In the Maximum Port speed area, the highest speed, probably, 921600
Step 20 - Selet the 'Advanced' tab, and paste the below in the blank:
AT+CGDCONT=1,"IP","epc.t-mobile.com"
Step 21 - Click ok, ok, all the way out.
Return to Network Connections in Control Panel, and find in the list, the name of the connection you created. It will be the name you gave it in step 7.
Double click that connection, of course with the phone plugged in, and select 'Connect.' You should be all set.
I just followed these steps, as I was typing them, to create new connection, and it worked.
Also, you can right-click the connection in Network Connections, and select 'Create Shortcut,' to have a shortcut to the connection, placed on your desktop.
I am on a windows 7 device. Step number 20 doesn't work for me. Under Advance tab I cannot input anything. Please help.
aiwapro said:
Dial-up networking still works on mine, and I'm on the latest OTA, JI6. I'm using it to tether to my XP computer via a usb cable.
Step 1 - install Samsung drivers (instructions abound, run a search)
Step 2 - set to USB Debugging Mode
Step 3 - Plug in phone (wait for all drivers to install, now that the phone is plugged in;
Step 4 - In Windows XP, go to Start, Control Panel, Network Connections
Step 5 - Select Create a New connection from the menu on the left
Step 6 - Select, Next, Next, 'Setup my connection manually,' Next,
Step 7 - check only the box next to Samsung Android USB Modem, Next, name it whatever you like
Step 8 - Enter '*99#'
Step 9 - Next
Step 10 - Populate username as 'wap' and password with 'password'
Step 11 - uncheck the bottom checkbox
Step 12 - Next and/or Finish
Step 13 - Close the pop-up window that comes up.
Step 14 - Return to Control Panel
Step 15 - Double-click 'Phone and Modem Options'
Step 16 - Select the 'Modems' tab
Step 17 - Select the Samsung Android USB Modem that you selected in Step 7
Step 18 - Click 'Properties,' click the 'Modem' tab,
Step 19 - In the Maximum Port speed area, the highest speed, probably, 921600
Step 20 - Selet the 'Advanced' tab, and paste the below in the blank:
AT+CGDCONT=1,"IP","epc.t-mobile.com"
Step 21 - Click ok, ok, all the way out.
Return to Network Connections in Control Panel, and find in the list, the name of the connection you created. It will be the name you gave it in step 7.
Double click that connection, of course with the phone plugged in, and select 'Connect.' You should be all set.
I just followed these steps, as I was typing them, to create new connection, and it worked.
Also, you can right-click the connection in Network Connections, and select 'Create Shortcut,' to have a shortcut to the connection, placed on your desktop.
Click to expand...
Click to collapse
moyofalaye said:
Hi ttabbal, what did you do to get it running in linux. I thought one would just enable debugging, plug it in and automatically tethering begins.
Could you explain a lil further.
Thanks in advance
Click to expand...
Click to collapse
I'm using Ubuntu, and they provide a nice little config app for the network connections. I just told it I wanted a dial up connection, it detected my phone attached and even had good defaults for TMobile. When I want it, I click the little status bar icon and select the cell connection. It does the rest.
P500 - Other phones
Unable to send files to other phones of any type through the default stock file manager. " x File not sent" error. Bluetooth on, device discoverable, Paired but not connected.
Used ThinkOffice Free and sent files successfully to the same phones without any problem regarding file sizes or file types by using it's file manager. Bluetooth on, device discoverable, Paired but not connected.
Other Phones - P500
If said phones have FTP , they access files easily on P500 and get whatever they need. The other phones are able to send stuff too.
P500-W7 Laptop
Unable to send files from phone to laptop. Laptop can access bluetooth folder and get the files it needs or it can send whatever files it needs to send. All laptops I tried to connect with, I got the same error. "x File not sent" on the same settings.
Summary: Default file manager unable to send files to any device. ThinkOfficeFree File Manager using the same bluetooth settings manages to send files to phones, but not a Win7 Laptop.
Searched the forum for similar threads, and they suggest using an alternate file manager which is what ThinkOfficeFree file manager basically is. But for phone to laptop transfers I might try another file manager to see if it works.
My questions are :
1. Is it natural to have such problems? Even my lowly GM200 sends files without any hiccups. It's Android 2.2 after all not 1.5 >.>
2. Is using an alternate file manager the only solution ? And does it work all the time with any device, laptop or phone?
3. I see many people bugged with the issue, why isn't there a proper fix yet from the devs and manufacturers themselves?
4. Will formatting /erasing the SD card*default that came with the phone*, factory resetting the phone help the cause?
ubajaj said:
P500 - Other phones
Unable to send files to other phones of any type through the default stock file manager. " x File not sent" error. Bluetooth on, device discoverable, Paired but not connected.
Used ThinkOffice Free and sent files successfully to the same phones without any problem regarding file sizes or file types by using it's file manager. Bluetooth on, device discoverable, Paired but not connected.
Other Phones - P500
If said phones have FTP , they access files easily on P500 and get whatever they need. The other phones are able to send stuff too.
P500-W7 Laptop
Unable to send files from phone to laptop. Laptop can access bluetooth folder and get the files it needs or it can send whatever files it needs to send. All laptops I tried to connect with, I got the same error. "x File not sent" on the same settings.
Summary: Default file manager unable to send files to any device. ThinkOfficeFree File Manager using the same bluetooth settings manages to send files to phones, but not a Win7 Laptop.
Searched the forum for similar threads, and they suggest using an alternate file manager which is what ThinkOfficeFree file manager basically is. But for phone to laptop transfers I might try another file manager to see if it works.
My questions are :
1. Is it natural to have such problems? Even my lowly GM200 sends files without any hiccups. It's Android 2.2 after all not 1.5 >.>
2. Is using an alternate file manager the only solution ? And does it work all the time with any device, laptop or phone?
3. I see many people bugged with the issue, why isn't there a proper fix yet from the devs and manufacturers themselves?
4. Will formatting /erasing the SD card*default that came with the phone*, factory resetting the phone help the cause?
Click to expand...
Click to collapse
yes these problems do exist in 2.2 but custom rom works well
try using blutooth file transfer and check if it works
no use formatting your sd card
Bluetooth File Transfer works.. Although it's slow on the "searching for service" "connecting to service" front, the rest is for now going on smoothly.
Hi All,
I have one x10mp with Cyanogem CM6 miniCM6 v2.0.
I managed to connect it with my computer, but in the android, in bluetooth settings show "paired but not connected". I can send files from PC to Android without problems, but I can not sendo files from android to PC, it says that can not connect (Crazy Thing), and in PC, all was set up to accept connection. I installed the bluetooth explorer lite or any other type of application in android, but nothing, only receives.
Does anyone have any idea how I fix this? Have i install any application in PC ?
Ty a lot
Moacir Jr.
moahrs said:
Hi All,
I have one x10mp with Cyanogem CM6 miniCM6 v2.0.
I managed to connect it with my computer, but in the android, in bluetooth settings show "paired but not connected". I can send files from PC to Android without problems, but I can not sendo files from android to PC, it says that can not connect (Crazy Thing), and in PC, all was set up to accept connection. I installed the bluetooth explorer lite or any other type of application in android, but nothing, only receives.
Does anyone have any idea how I fix this? Have i install any application in PC ?
Ty a lot
Moacir Jr.
Click to expand...
Click to collapse
From any file manager, Share > Bluetooth
or you could use Bluetooth File Transfer, avalaible on the market for free, it that case it comes with a built-in file manager and also can browse remote files. You can also do Share> Send with bluetooth with this app from any file manager.
EDIT: This should have been posted in X10 mini general as this is a DEV forum.
EDIT2: Correction not General, the Q&A forum, I just noticed it XD.
Ty for help, i will testing, and sry for post in wrong place.
ty a lot
Moacir Jr.
I was tested, and i am not found the "share", in my windows xp, this option dont exist.
I discovered that if i use the "%windir%\system32\fsquirt.exe" in the option "receive file", i can send file from phone to PC, but is a unique file. I need to start aways i to send a file from phone to pc.
With Bluetooth File Transfer is the same, him only connect with PC and send a unique file, if the program above is started.
Ty a lot
Moacir Jr.
If your saying that you are trying to access the phone like a windows network share, you need to go to bluetooth file transfer and turn on the Sharing Service (FTP).
EDIT: Forget what I said, since you are using fsquirt.exe, I assume you are using the default windows bluetooth stack. Its just simply there was no software listening for incoming transfers, hence the need to start fsquirt. Anyways, this is not a problem with the phone, in fact you should take it to a windows PC forum, as your problem has nothing to do with your phone.
Hi xda,
I am glad to be here and to know this site, almost for masters! (which I am not)
Guys, I just want to know if anyone have or had my same issue with the bluetooth when I connect my HTC HD2 to my PC for listening the music, same like in the car.
No matter which ROM I installed, T-Mobile 3.14, Custom or any stock I can't connect via Stereo Audio to my pc.
I can transfer files, I can navigate into my HD2 via bluetooth BUT when I try to connect via Stereo Audio it fail, please see the attachment.
I also can't use audio via Hands-free, practically I do everything but without Stereo Audio.
I already installed update for my bluetooth on my PC.
I try to fix this problem all month and I realized the problem are the drivers on my phone (or ViceVersa ), because if I use Android with my HTC HD2 it works.
I use most of the time WM 6.5 and I want to connect to my car stereo or PC via bluetooth to listening the music but I have this problem.
Nothing helped me jet and I do not find any fix of any kind so my question is if there is any fix for this problem?
Please help, I appriciate if some one can help me.
Thankx.
..no solution? :crying:
No fix at all? Why?
:crying:
Uhaaa, Uhaaa, uhaaaaaa :crying:
Will look at this when I got a free moment as I use to connect my HD2 via BT to a USB BT dongle on work notebook which worked via a headset profile ... Will test when I got time & report findings if seems relevant to your stereo audio issue ...
Mister B said:
Will look at this when I got a free moment as I use to connect my HD2 via BT to a USB BT dongle on work notebook which worked via a headset profile ... Will test when I got time & report findings if seems relevant to your stereo audio issue ...
Click to expand...
Click to collapse
oh, Mister B, I start to like you!
This issue was wrote some where and few people know about it but nobody said how to fix this.
I used my old HTC Diamond 2 via bluetooth to listening music on my laptop with speakers but somehow with HD2 it is impossible, and supposed to be "newer" than diamond.
I can connect stereo audio with my HD2 after run Android, so basicly this issue is some driver or something like that in my ROM.
To be sure I also tried Stock ROM and 3 different ROM and All of them have this issue. I just don't know where to look.
I can live with this but I can't believe there is no fix for this, that's why I can't slipping in the night!
Let me know.
Cheers.
I just want to say this, I use all the time Windows Mobile 6.5 and sometime Android, so I will be glad if this issue will be solved on my WM6.5......
Problem with HD2 BT was mainly due to change of BT stack manufacturer thus a few new driver issues that never really got worked out fully.
Once I got some time free & am at my work PC I will run through it & see what results I get.
I'm on WM6.5.3 as in signature ...
Well I put work on hold & had a play, works fine for me on 6.5.3 & windows 7 Notebook with built in BT module.
I got same initial issue as you with 1 driver error, I tried correcting from device manger by checking windows update with no result & then manually searched whole of C:\ drive for driver with no result.
I then looked in folder with our HD2 files (company using over 20 HD2s at present) & found Bluetooth driver zip file.
unzipped them to desktop & went back into device manager & manually searched driver, got disc option & choose inf file on desktop & it installed fine.
reconnected bluetooth between HD2 & Notebook via bluetooth options on HD2 & selected stereo audio & then tested by selecting some music to play on my HD2 ...
Result was some rather loud music blasting out of the notebooks rather good Altec Lansing speakers & my Boss fully aware of my poor work ethics :-S
Couple of screen shots below & the bluetooth driver files in a zip archive.
May take a bit of messing around to get driver installed or perhaps deleting any current Bluetooth partnership & starting new but result should be worth it
Picture shows ActiveSync connected which it was via WMDC at time, I also tested again just via BT Stereo Audio & no activesync & all working as should so far :-S
Mister B said:
Well I put work on hold & had a play, works f...........
........................................ tested again just via BT Stereo Audio & no activesync & all working as should so far :-S
Click to expand...
Click to collapse
Sorry but this time I am unlacky.
I did like you said. First of all I uninstalled all bluetooth drivers and devices from my lap. I rebooted and the pc compleated the reinstall of basic bluetooth option with no error. So I put on desktop the zip file which you give me and I extract the driver to a folder. I connected the phone via bluetooth and like all the time I got the error of the peripherial drive missing. So via Device Manager I finded the Bluetooth Peripherial Device and I manually selected to Update the driver, Browse my computer, Let me pick up...., Have a disk, Install from disk, and I browse to the folder where I extract the driver from your zip and I can't install it. See the attachment.
I got Windows 7 with WMDC, my bluetooth hardware on laptop is Broadcom, my HD2 rum WM 6.5.
I don't know what is going on with this stuff.....
PS: I hope you do not risk your position at work to have fun with this stuff....
Windows 7 32 bit or 64 ?
I would perhaps update your WMDC if not the last build ...
Maybe check for specific drivers for your broadcomm BT from manufacturer website ...
Also checking way you try installing driver as error looks like it unable to find the .cat file rather than a compatibility issue ...
It does work so you can have some hope but perhaps some BT stacks have more issues !
Works on 3 Notebooks I tested so far: HPdv2535, Lenovo thinkpad & ideapad s205 ...
* Still have a job so no worries
Mister B said:
Windows 7 32 bit or 64 ?
I would perhaps update your WMDC if not the last build ...
Maybe check for specific drivers for your broadcomm BT from manufacturer website ...
Also checking way you try installing driver as error looks like it unable to find the .cat file rather than a compatibility issue ...
It does work so you can have some hope but perhaps some BT stacks have more issues !
Works on 3 Notebooks I tested so far: HPdv2535, Lenovo thinkpad & ideapad s205 ...
* Still have a job so no worries
Click to expand...
Click to collapse
Windows 7 32bit,
the WMDC is update already and work fine,
the manufacturer Broadcom webside do not update or fix the driver for my hardware Broadcom, I allredy did and I downloaded the app to update the Broadcom hardware and the app saing "We can't update your hardware" I said WHAT? F..k you! I read about this somewhere and the responsibility is the manufacturer of my laptop, SONY, so for all of them there is not any issue with this hardware bluetooth, and I think they are right.
.cat file is not on the list because when I serching for the driver, the only one which the hardware need is .inf, .inf is linked to .cat, if this link in your driver, which you give me, is broken or lost, I can't do anything about it. I got only this two files, .inf & .cat.
What I think, like I said few post before, is not the problem of my laptop (Sony Vaio FW21M) but is with the drivers into the HD2, because when I use Android no problem at all. If my laptop was the problem I will never connect anything via stereo audio via bluetooth.
Also you do not mentioned which ROM you using on you HD2, is not the same as mine so there will be the difference. The difference is into the ROMs.
Probably this issue have to be forced via registry or via .cab with some fix or driver but no luck at all at the moment and I can't believe is just ME.
PS: Thanks for help me anyway! I allredy clicked on thanks for you!
..and please, if you find something for my case, please, let me know ASAP!
My ROM is as in signature & is quite an old one.
Only 2 files should be in that driver update so that fine but fact you got error message that not found during install attempt could indicate an error on manual install technique perhaps.
Your HD2 ROM could have some influence on it but your initial one missing driver durring initial BT pairing is same as I seen on all HD2 WM6.5 I used & once driver install on PC/Notebook you good to go ... If I find anything new I will post it ASAP
If you find the fix post it as will be interested ...
Mister B said:
My ROM is as in signature & is quite an old one.
Only 2 files should be in that driver update so that fine but fact you got error message that not found during install attempt could indicate an error on manual install technique perhaps.
Your HD2 ROM could have some influence on it but your initial one missing driver durring initial BT pairing is same as I seen on all HD2 WM6.5 I used & once driver install on PC/Notebook you good to go ... If I find anything new I will post it ASAP
If you find the fix post it as will be interested ...
Click to expand...
Click to collapse
Well, my is much older, CRACING WM 6.5 OS 21889,
Ok, so this error during the installation is weird? or is a manual installation techniques isssue :angel:, so it's me.
Can you, pleasee, explain to me step by step how to do the update of the driver from your zip, pleasee...
I want try again, I can't give up! Perhaps I did something wrong.
I unzipped the 2 files direct to desktop but you may want to try putting them directly in root of C:\
Then in Device Manager selected the BT missiing driver item with error icon then: Update driver > browse my computer for driver software > let me pick from a list of device drivers on my computer > Have Disk (button) > Browse (button) & search & select the inf file & proceed through prompts as needed to install.
The cat file must be in same directory as inf.
May be worth pausing any Anti-Virus software to eliminate it from possible cause of issue, Norton being one that causes huge amount of issues .
If still have issues consider downloading latest W7 bluetooth driver package from your laptop manufacturer & reinstall & do same for WMDC.
You could also look at this thread perhaps as may help :-S
Mister B said:
I unzipped the 2 files direct to desktop but you may want to try putting them directly in root of C:\
Then in Device Manager selected the BT missiing driver item with error icon then: Update driver > browse my computer for driver software > let me pick from a list of device drivers on my computer > Have Disk (button) > Browse (button) & search & select the inf file & proceed through prompts as needed to install.
The cat file must be in same directory as inf.
May be worth pausing any Anti-Virus software to eliminate it from possible cause of issue, Norton being one that causes huge amount of issues .
If still have issues consider downloading latest W7 bluetooth driver package from your laptop manufacturer & reinstall & do same for WMDC.
You could also look at this thread perhaps as may help :-S
Click to expand...
Click to collapse
I did all what you said and all the same, my anti-virus is fine and the file still in the folder and also I put them in C:\,
Always the same error.
Few weeks ago I also saw the forum about this issue and I try to follow the instruction from the webside, same which you give me, but like many I do not have "Microsoft Corporation" on the list of drivers with "Windows Mobile-Based Device Support". (and I do not have AMD, but Intel)
And there is no highest update of WMDC 6.1, still all the same last version.
My drivers of my laptop much udated than now can't be.
Ok, I give up, this stupid Scientists and Engineers made Hi-End stuff whit issues and no solution for it.
We can't do nothing about it.
Problem solved!
If any one had and have right now this problem and need a solution this is the right place!!
I find the solution, was the Mobile Radio 2.15.xx.xx_x.
Yes, I solved the problem after months of pain and tests.
I downgrade the radio to 2.08.50.05 and all working now, from first play, even Android, amazing.
Thanks for all the support.