Help W/ 2.3 Android - Android Q&A, Help & Troubleshooting

I bought a LG MyTouch 4G Slide (myTouch Q)
I rooted it, upgraded the software, everything was great.
I was flashing a theme through zip and suddenly, it cut off and now my phone is unresponsive.
The LG splash screen shows twice, followed by displaying the following message:
E:Can't find misc
E:Can't find misc
Finding Update Packages..
E:unknown volume for path [SDCAR
D:/download/(name of the zip file)]
E:Can't mount SDCARD:/(File location)
Installation Aborted.
Factory Reset Failed
Restart Factory Reset
Then the cycle repeats its self.
I cannot access bootloader (power+volume down) no matter how many times I try, it continues to do the same process.
I have searched everywhere and cannot find the answer to this problem, does anyone know how I can make my phone work again?

how'd you upgrade the software? try loading a stock rom either through your computer or sd card, I'm not familiar with the exact process for a slide, but that's what I'd try.

andy55 said:
how'd you upgrade the software? try loading a stock rom either through your computer or sd card, I'm not familiar with the exact process for a slide, but that's what I'd try.
Click to expand...
Click to collapse
I did it the old-fashioned way. Went into settings and searched for updates, then T-Mobile updated me OTA.
The phone worked perfect prior to the theme.
Every file I've put on the sdcard seems to not have any effect on this problem.
Do you know where I can find a stock ROM for LG M4GS? All the one's I've seen around are for HTC.
I downloaded ODIN but it only tells me to connect the phone when it's plugged in via USB.

I'll donate to whoever helps me, really need to fix this issue.

how'd you try to flash the theme? through a custom recovery?
and why did it stop?
did you give hard factory reset a try? (dunno what exactly it resets but it might help, and it might actually be exactly what your phone is trying to do according to the screen output):
http://forum.xda-developers.com/showpost.php?p=20310765&postcount=8
if that does not work, try to at least get some more logcat:
install the android sdk, plug your powered-off-phone into usb, run:
adb logcat
it should start the service and be:
Code:
- waiting for device -
then power the phone and post the output...
good luck

Questions should be asked in Q&A forums, not Development forums.
Thread moved.

florpor said:
how'd you try to flash the theme? through a custom recovery?
and why did it stop?
did you give hard factory reset a try? (dunno what exactly it resets but it might help, and it might actually be exactly what your phone is trying to do according to the screen output):
http://forum.xda-developers.com/showpost.php?p=20310765&postcount=8
if that does not work, try to at least get some more logcat:
install the android sdk, plug your powered-off-phone into usb, run:
adb logcat
it should start the service and be:
Code:
- waiting for device -
then power the phone and post the output...
good luck
Click to expand...
Click to collapse
Attached is a screenshot of the error I receive everytime.
The phone does not stay powered off when USB connected, keeps trying to boot.
After two splash screens, the error screen shows.
I used SDK to obtain the screenshot, but none of the other tools seem to work.
Below I have attached the screenshot.

so did you try the hard reset?
if you did, can you get into recovery mode (supposed to be A [QWERTY] + F [QWERTY] + Vol Down + Pwr) or s/w upgrade mode? (E [QWERTY] + Vol Up + Pwr)
if you can get into either one you're probably ok.
through recovery you can flash whatever, and through s/w upgrade you can use a tool called LG Mobile Update Tool (you wrote about odin, which is a samsung tool for samsung phones. this is apparently the lg equivalent):
download the original 2.3.6 firmware here:
http://forum.xda-developers.com/showthread.php?t=1825818
and do what they say here (its for the mytouch 4g but i guess the process is the same. you might wanna read up on this a bitbefore you do it):
http://forums.acsyndicate.net/showthread.php?5397-Tutorial-KDZ-How-to-update-your-LG-mytouch-4g-(E739)-manually

florpor said:
so did you try the hard reset?
if you did, can you get into recovery mode (supposed to be A [QWERTY] + F [QWERTY] + Vol Down + Pwr) or s/w upgrade mode? (E [QWERTY] + Vol Up + Pwr)
if you can get into either one you're probably ok.
through recovery you can flash whatever, and through s/w upgrade you can use a tool called LG Mobile Update Tool (you wrote about odin, which is a samsung tool for samsung phones. this is apparently the lg equivalent):
download the original 2.3.6 firmware here:
http://forum.xda-developers.com/showthread.php?t=1825818
and do what they say here (its for the mytouch 4g but i guess the process is the same. you might wanna read up on this a bitbefore you do it):
http://forums.acsyndicate.net/showthread.php?5397-Tutorial-KDZ-How-to-update-your-LG-mytouch-4g-(E739)-manually
Click to expand...
Click to collapse
I looked every where for this and hope it does not violate any rules - but wanted to repost so that it might help someone else. Again if it is a violation then I apologize but was just before returning to LG for repair.
If you have a tmobile prepaid LG c800 ( may work with contract phone not Sure) this should un brick your phone. I am not the author and take no credit it came from here :
http://androidforums.com/mytouch-q-...-progress-porting-custom-recovery-over-2.html
1: Download and install Drivers from LG site Mines is C800VL. http://www.lg.com/us/products/documents/LG_OSP2.0_Setup_2.0.07.20111130.exe
2: Download and install LGMobile Support Tool leave open i read it is needed to flash. http://csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
3: Download the .kdz file Its for C800DG but works for C800VL , C800VL don't have a kdz file at least i don't know i looked every where. V10D_00(C800DG).kdz - 4shared.com - online file sharing and storage - download
4: Open LGMobile Support Tool leave open.
5: Download the Flasher from post one
http://androidforums.com/attachment...s-porting-custom-recovery-over-updater-2-.zip unzip and install msxml.msi included with zip
open KDZ_FW_UPD.exe set to 3GQCT - Smart Phone(WM)
browse for KDZ file (V10D_00(C800DG).kdz)
click lunch software update and you should be in S/W Upgrade mode wait for program to finish if it errors leave phone in update mode and click lunch software update again.
One note make sure to download the correct version, there seems to be several the "LGMobile Support Tool"( file name "B2CAppSetup.exe") one will take you to the LG site and do an automatic update and tell you that your phone is not supported and to contact LG and the - "KDZ_FW_UPD.exe" it will be the one with the "browse for file" on the opening screen, also not sure but on another web site it said to use windows enabler file V 1.1 it will run on the task bar at the bottom as an Icon of the seperate windows tiled, click on this so that it says"on" not postive it is necessary but this how I ran the KDZ file. There is a V10V kdz file but it would not work on mine.
Update: after flashing with kdz - V10D_00 (2.3.4) Reflashed/updated with kdz V10v (2.3.6) would not upgrade OTA or at the lg site.

Related

[Q] Bricked after attempting to upgrade to 2.3.5... HELP PLEASE

Hello, I am a newbie Android user and I have been exploring the greatness of the OS for few days now.
Just now I tried to update my firmware to 2.3.5 and followed instruction from a non-xda developer site and little did I know, it messed up my phone big time.
While I was loading all the files (CSC, tar, modem, etc), and I should've known better when the site told me to check the "re partition" box, but I was stupid enough to go along with it.
So Odin got stuck at re-writing the modem or something like that and I had to pull out the battery from the phone.
Now the phone turns on only in recovery mode and none of the recovery choices work, if I choose one it just shows a little green android with white bordered triangle with an orange exclamation mark in the middle.
I can still access the download mode by using conventional button pressing method, but my phone is NO LONGER RECOGNIZED through the USB so I cannot flash the old stock firmware...
Is there a fix for this? If anyone can help me resolve this issue I am willing to compensate very well in return...
Thank you so much for reading my convoluted troubled story, and I really hope to find some resolution in your wisdom.
If u can't reflash your farmware
Than their is only one option left
give it to the Samsung service center they will repair your phone
Sent from my GT-S5570 using xda premium
I'd be down to do so but it will be hard as I have 4 custom binary flash counter... What can I do as of now?
i dont know if this helps you out buddy but maybe if you read in this thread you might find people that had the same trouble as you..just try and search the thread first and if nothing comes up try and read the first page maybe there you might get an idea on how to unbrick the phone
http://forum.xda-developers.com/showthread.php?t=1075278
Thank you.. But I unfortunately did not follow the instructions that is written there I used an external source which told me to check "re partition" which completely messed up the phone, I think. Thank you for your input, though.
sfoksn said:
Thank you.. But I unfortunately did not follow the instructions that is written there I used an external source which told me to check "re partition" which completely messed up the phone, I think. Thank you for your input, though.
Click to expand...
Click to collapse
i dont want to advice you wrongly but you say you can get into download mode right? if it was my phone i would try and flash again but this time using the proper way to do it....but its down to you my friend i dont want to say do it and it gets worse..
EDIT: apologies i just saw that your usb is not recognised...do you have kies on the background when you flash with odin?
Check this unbricker
android-roms.googlecode.com/files/DREAIMG-RC29.zip
Download DREAIMG-RC29.zip and unzip the file.
Reformat the SD card to FAT32 and copy the DREAIMG.nbh onto it.
Safely eject the SD card.
Put the SD card into your device.
Step 3: Wipe The Phone
Hold home and press the power button.
When you see the image of an ! mark, open your keyboard and press Alt + L if you cannot see any command options.
Do a factory reset by pressing Alt + W or just using the trackball.
When the reset is done, go ahead and hold the camera button and select the reboot system now option with your trackball.
Step 4: Flashing The Phone
Once the grey screen pops up (or the white screen if your phone was rooted with JesusFreke) it will ask you to hit a button to start installing the image…press that button. DO NOT DO ANYTHING TO STOP THIS PROCCESS. It will take about 8-12 minutes.
When the image has completed the installation (it will say completed), go ahead and press the green, red, and menu buttons at the same time. The phone will reboot.
And your done! Your phone is now unbricked!.
If this helps u buy me a HTC sensation.
debsattam said:
Check this unbricker
android-roms.googlecode.com/files/DREAIMG-RC29.zip
Download DREAIMG-RC29.zip and unzip the file.
Reformat the SD card to FAT32 and copy the DREAIMG.nbh onto it.
Safely eject the SD card.
Put the SD card into your device.
Step 3: Wipe The Phone
Hold home and press the power button.
When you see the image of an ! mark, open your keyboard and press Alt + L if you cannot see any command options.
Do a factory reset by pressing Alt + W or just using the trackball.
When the reset is done, go ahead and hold the camera button and select the reboot system now option with your trackball.
Step 4: Flashing The Phone
Once the grey screen pops up (or the white screen if your phone was rooted with JesusFreke) it will ask you to hit a button to start installing the image…press that button. DO NOT DO ANYTHING TO STOP THIS PROCCESS. It will take about 8-12 minutes.
When the image has completed the installation (it will say completed), go ahead and press the green, red, and menu buttons at the same time. The phone will reboot.
And your done! Your phone is now unbricked!.
If this helps u buy me a HTC sensation.
Click to expand...
Click to collapse
Thanks for such detailed instruction! Would this method work if my phone is no longer recognized by the computer though? Please clarify what you mean by "open your keyboard" and the subsequent steps...
Thank you, once again!
sfoksn said:
Thanks for such detailed instruction! Would this method work if my phone is no longer recognized by the computer though? Please clarify what you mean by "open your keyboard" and the subsequent steps...
Thank you, once again!
Click to expand...
Click to collapse
Yeah it althrough works . Try it its helps he to unbrick ma t mobile oncemay be It works on ur phone to
Sent from my GT-S5570 using xda premium
Ah I see. Could you please help me understand what you mean by "open keyboard?" I just don't see how I could open keyboard on my SGS2 when it isn't recognized by my computer... If you could clarify what you mean by that it will be really appreciated!
So from your information provided, you have a stock recovery and your phone is semi-bricked. You can still boot and your computer won't recognize your phone.
Do you have a jig? What firmware did you flash? You could use a jig to reset the flash counter on the phone and return it for warranty saying that Kies messed up while upgrading firmware. If you've flashed the KI3 with the new bootloader then the jig won't be able to clear the flash counter.
EDIT: Maybe an experienced senior member might come and look at this thread and provide some other solution. Do wait!
EDIT2: Try reinstalling Kies and the drivers. Don't give up just yet!
sfoksn said:
Ah I see. Could you please help me understand what you mean by "open keyboard?" I just don't see how I could open keyboard on my SGS2 when it isn't recognized by my computer... If you could clarify what you mean by that it will be really appreciated!
Click to expand...
Click to collapse
I don't think that the guide he posted is particularly for galaxy s2 because he also mentioned a trackball...
but if you can go the settings he mentioned you might find something and lead you.
And if you decide to bring the phone to samsung you might want to have a read at Intratechs Official firmware
thread in (Original Android Development)there you can find a bootloader that you can flash so you can use the jig to reset the counter
edit: wow I also failed to read that your computer can't recognise your phone
anymore....
Have you tried to delete the samsung drivers when you go to
your hardware settings?? and let windows find it's drivers again?
Not sure if this will help. I read somewhere someone else with their PC not really recognizing the phone. Someone else advised to unplug the phone and remove the battery then connect to PC insert battery and put it into download mode.
I could be wrong with the method. Its just from my memory.
Also this may make no difference but maybe removing the sim and SD card. Someone will probably call me stupid for suggesting that though.
I wouldn't try that unbrick method mate. That looks like it is an unroot for an old phone..possible the G1 (AKA HTC Dream).
Thanks for all the help... I have been trying to uninstall the driver and reinstall it but no luck. If I could just get the phone to be recognized I think I will be fine, but I just don't know what to do
Thank you for all the suggestions, please keep them coming!
EDIT: this is the guide I used that messed up my phone.. http://androidflip.com/install-andr...-samsung-galaxy-s2-gt-i9100-installing-guide/
EDIT: Tried to reinstall KIES, no luck. It's like there's nothing on the other side of the USB cord... Not even a sound when I plug the phone in...
If it had been via XDA the instructions are do not do what they are saying .
In Odin Select Re-Partition , Auto Reboot and F.Reset Time
In Odin select these files
For PIT select u1_02_20110310_emmc_EXT4.pit
BIG BIG NO to the above .
As usual some stuff ripped from XDA and some from elsewhere .
My suggestion would be one buy USB jig it hopefully will clear the rom counter and enter download mode .
two in recovery mode go to mounts and storage and format cache data dalvik system and sd card .
Clean phone with nothing on it .Flash stock firmware .
http://forum.xda-developers.com/showthread.php?t=1075278
If PC does not now recognise phone either try another PC or return phone to service centre and say it failed on a Kies upgrade .
jje
Go through the following steps on your PC or laptop:
1. Go to Start
2. Panel
3. Programs and Features
4. Windows features on or off (then a list compiled, this can take several seconds).
5. Then you see a check stand Microsoft. NET Framework 3.0 or 3.5 (if not, tick)
6. Open the sub folders with the + and then be there for the 3 sub folders a checkmark (if not checked, any configuration takes several minutes)
- Windows Communication Foundation HTTP Activation
- Windows Communication Foundation Non-HTTP Activation
- XPS Viewer
7. Then click OK
8. Now start up your computer.
9. Now you choose to uninstall through Programs and Features
10. Also remove the Samsung USB Driver.
11. Then download the latest version of Kies on the Samsung site and install it.
12. Now launch the program Select Samsung and go to the Tools tab.
13. Then click on drivers.
14. Once this is complete close the Galaxy S2 with the USB cable to your computer.
15. If all is well you now have access to your phone via the USB connection.
If there are any questions, you can leave a response below.
I am not sure if this will help but you might want to have a try. I got this
from a Dutch website. I google translated it for you and hoping you wont
have trouble reading it. This is one of the guides posted when some of us
here couldn't connect our phone with the usb cable.
droidluck said:
Go through the following steps on your PC or laptop:
1. Go to Start
2. Panel
3. Programs and Features
4. Windows features on or off (then a list compiled, this can take several seconds).
5. Then you see a check stand Microsoft. NET Framework 3.0 or 3.5 (if not, tick)
6. Open the sub folders with the + and then be there for the 3 sub folders a checkmark (if not checked, any configuration takes several minutes)
- Windows Communication Foundation HTTP Activation
- Windows Communication Foundation Non-HTTP Activation
- XPS Viewer
7. Then click OK
8. Now start up your computer.
9. Now you choose to uninstall through Programs and Features
10. Also remove the Samsung USB Driver.
11. Then download the latest version of Kies on the Samsung site and install it.
12. Now launch the program Select Samsung and go to the Tools tab.
13. Then click on drivers.
14. Once this is complete close the Galaxy S2 with the USB cable to your computer.
15. If all is well you now have access to your phone via the USB connection.
If there are any questions, you can leave a response below.
I am not sure if this will help but you might want to have a try. I got this
from a Dutch website. I google translated it for you and hoping you wont
have trouble reading it. This is one of the guides posted when some of us
here couldn't connect our phone with the usb cable.
Click to expand...
Click to collapse
Thanks, I tried to do this but unfortunately the problem persists... What do you think the root of the problem is? I just dont' get it why it won't be recognized anymore.. I feel like I could easily get it to work if I could just get it to become recognized to flash stock firmware....
EDIT: JJE, I would turn it into the service place but I have custom rom count of 4 And I don't have any USB jigs to work with either.... I am still within the 15 days of the phone purchase day, would they be willing to swap my phone?
BUMP, any input would be appreciated...

URGENT! LG L86c Optimus Showtime "Secure Booting Unsuccessful"

I rooted my LG L86c Optimus Showtime. I uninstalled some random app that came with it and I could uninstall with a special app like Twitter and Google Play Movies. Now I get "Secure Booting Unsuccessful Cause: errorlogo" I found that Google Play Movies has some DRM stuff in it that the phone checks for when it boots, and if it is not there, it fails the security test, and does not boot. I need help trying to get my phone in working order. Please ANYONE help me through this step by step. Just bought this phone and now it's a brick.
Edit: I was able to get it to the "Download is in progress. Do not disconnect cable." screen if that helps. I also downloaded the original .cab file for my phone with the app on this thread http://forum.xda-developers.com/showthread.php?t=1073827 I just don't know what to do with it all.
Please someone help. I spent the only money I had on this phone and now it's a paper weight. I use this for my job
hi i also get the secure booting unsuccessful error when booting my lgl86c
i have downloaded the original firmware using the download app
am currently trying to flash with the lg software update rdz tool
but keep getting loadlibrary error(126)
can sum1 please assist us
thanx
DigitalRenegade said:
I rooted my LG L86c Optimus Showtime. I uninstalled some random app that came with it and I could uninstall with a special app like Twitter and Google Play Movies. Now I get "Secure Booting Unsuccessful Cause: errorlogo" I found that Google Play Movies has some DRM stuff in it that the phone checks for when it boots, and if it is not there, it fails the security test, and does not boot. I need help trying to get my phone in working order. Please ANYONE help me through this step by step. Just bought this phone and now it's a brick.
Edit: I was able to get it to the "Download is in progress. Do not disconnect cable." screen if that helps. I also downloaded the original .cab file for my phone with the app on this thread http://forum.xda-developers.com/showthread.php?t=1073827 I just don't know what to do with it all.
Click to expand...
Click to collapse
If your rooted you could always try and push the apk you removed back with adb.
Sent from my LG-LS970 using xda app-developers app
LG Optimus Showtime Boot Problems
DigitalRenegade said:
I rooted my LG L86c Optimus Showtime. I uninstalled some random app that came with it and I could uninstall with a special app like Twitter and Google Play Movies. Now I get "Secure Booting Unsuccessful Cause: errorlogo" I found that Google Play Movies has some DRM stuff in it that the phone checks for when it boots, and if it is not there, it fails the security test, and does not boot. I need help trying to get my phone in working order. Please ANYONE help me through this step by step. Just bought this phone and now it's a brick.
Edit: I was able to get it to the "Download is in progress. Do not disconnect cable." screen if that helps. I also downloaded the original .cab file for my phone with the app on this thread http://forum.xda-developers.com/showthread.php?t=1073827 I just don't know what to do with it all.
Click to expand...
Click to collapse
Could you please tell me how to get your LG Optimus Showtime L86C into the downloading mode. I have searched everywhere and can't get the information that I need. I have the same problem you do. Have you gotten your issues solved yet?
Hate to deviate, but I've been trying to find the drivers so that I can root my showtime but can't find them. Do you have a link?
Sent from my LGL86C using xda app-developers app
desert54 said:
If your rooted you could always try and push the apk you removed back with adb.
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
that wouldn't work.
when the phone is bricked like that, there's only two things you can do
go into emergency download mode, which not even LGs software repair tool can receognize
or make it reset itself to factory defaults, which also doesn't work because it doesn't put apps that aren't meant to be deleted back.
i know, i did this to my phone on accident and i had to buy a entirely new phone, because apparently this phone only exists on two message boards with very, very little posts or information.
I too have the exact same thing happening to me.
I have tried everything. In fact, I am willing to ship this phone to anyone out there to see if they can fix it.
Has anyone had any luck finding a fix to this yet?:crying::crying::crying:
Did you try hard reset? Usually in Lg Phones is hold power button + home button + volume up until the screen goes black and then release the power button. Keep holding the volume and home until you are in recovery.
Well, the thing about this phone is from what I have found is there are only 2 different screens that you can enter.
One screen is by pressing Power-Vol Down-Home and hold them down until a screen appears that says:
"Permanently Erase User Data & Reset Settings Press Power key to confirm, and any other key to cancel"
The other screen is by connecting the phone to the computer with a USB cable while holding down both Volume Up and Volume Down.
I have not been able to get any other screens to appear by any other means.
If I do the first above screen and let it go, the Android guy appears and it looks to begin to work, but when it goes away, the phone reboots and goes back to giving the error screen "Secure Booting Unsuccessful Cause: ErrorLogo".
Do you have any other suggestions?
peteyallison said:
Well, the thing about this phone is from what I have found is there are only 2 different screens that you can enter.
One screen is by pressing Power-Vol Down-Home and hold them down until a screen appears that says:
"Permanently Erase User Data & Reset Settings Press Power key to confirm, and any other key to cancel"
The other screen is by connecting the phone to the computer with a USB cable while holding down both Volume Up and Volume Down.
I have not been able to get any other screens to appear by any other means.
If I do the first above screen and let it go, the Android guy appears and it looks to begin to work, but when it goes away, the phone reboots and goes back to giving the error screen "Secure Booting Unsuccessful Cause: ErrorLogo".
Do you have any other suggestions?
Click to expand...
Click to collapse
Well from what i know ( i am not an expert and far from one ) is that the security check on boot fails because it can't find all the original files you had in the ROM. Did you try to reset setting on the Power-Vol down-Home? This will destroy all your data and it can't be recovered. If this does not work i think the only way is to go in the emergenc mode and flash stock rom ( the one with usb cable). I will look into this a little more but i don't have the phone. Anyway if you can't boot you lost phone data. Try that reset and tell me what happens.
Thank you for your quick responses.
When I do the Power-Vol down-Home, this is what happens:
the Android guy appears and it looks to begin to work, but when it goes away, the phone reboots and goes back to giving the error screen "Secure Booting Unsuccessful Cause: ErrorLogo"
I really appreciate everything you are trying to do to help me!!
I have used the Original LG Firmware tool located here "http://forum.xda-developers.com/showthread.php?t=1073827" which is the only place that I can find the ROM for this phone anywhere on the internet, but for whatever reason, I cannot flash the phone.
I am really tired of trying. I'm so tired of messing with this phone. I'm almost ready to throw it in the trash.
peteyallison said:
Thank you for your quick responses.
When I do the Power-Vol down-Home, this is what happens:
the Android guy appears and it looks to begin to work, but when it goes away, the phone reboots and goes back to giving the error screen "Secure Booting Unsuccessful Cause: ErrorLogo"
I really appreciate everything you are trying to do to help me!!
I have used the Original LG Firmware tool located here "http://forum.xda-developers.com/showthread.php?t=1073827" which is the only place that I can find the ROM for this phone anywhere on the internet, but for whatever reason, I cannot flash the phone.
I am really tired of trying. I'm so tired of messing with this phone. I'm almost ready to throw it in the trash.
Click to expand...
Click to collapse
You have a .cab file from that?
Yes, that is correct. It is named "L86CV10a_12.S0a_12.P59289.cab"
That is the only place that I have found on the entire www that I have been able to locate a firmware file for this phone.
peteyallison said:
Yes, that is correct. It is named "L86CV10a_12.S0a_12.P59289.cab"
That is the only place that I have found on the entire www that I have been able to locate a firmware file for this phone.
Click to expand...
Click to collapse
Ah ok. You need to do the following conver the .cab into .kdz. Place your phone in download/emergy mode ( the one you put usb in ). Download lg drivers for your device. Then open Kdz flasher CDMA mode and emergency. Flash the image you converted. It will work i hope.
Here is the only place i found a converter. http://unleashedprepaids.com/printthread.php?tid=7736. Just do what i said up.
I don't really know if it will work for a different phone model. I am out of ideas if this doesn't work sorry. All you have to do is to find a way to flash that .cab from emergency mode or convert it to .kdz then kdz flash using emerngecy. Best of luck. Have a nice evening!
Yep, I had done this before, but I just did it again. It did this time what it did before.
This is the error message that I get every time that it tries flashing the phone.
[R&D Test Tools Log File]
16:27:34 : Launching SW update
16:27:34 : Unpacking KDZ
16:28:14 : KDZ file extraced
16:28:32 : Files were extracted.
16:28:32 : LGMobileDL Load.
16:28:32 : Port = -1
16:28:32 : Connecting to phone
16:28:48 : Check Phone mode = 1
16:29:11 : Phone type check.......
16:29:40 : LoadLibrary Error(126)
16:29:42 : ===FINISHED===
The LoadLibrary Error(126) is the part it always fails at and I am at a loss.
Thank you so much for all of your help!
peteyallison said:
Yep, I had done this before, but I just did it again. It did this time what it did before.
This is the error message that I get every time that it tries flashing the phone.
[R&D Test Tools Log File]
16:27:34 : Launching SW update
16:27:34 : Unpacking KDZ
16:28:14 : KDZ file extraced
16:28:32 : Files were extracted.
16:28:32 : LGMobileDL Load.
16:28:32 : Port = -1
16:28:32 : Connecting to phone
16:28:48 : Check Phone mode = 1
16:29:11 : Phone type check.......
16:29:40 : LoadLibrary Error(126)
16:29:42 : ===FINISHED===
The LoadLibrary Error(126) is the part it always fails at and I am at a loss.
Thank you so much for all of your help!
Click to expand...
Click to collapse
Yeah that error is from bad conversion it is missing some dll info or some info that should be there from conversion this is your problem. I cannot help from here i don't know to make dll's for a phone. Maybe someone else can best of luck. I am sorry for your phone!
Stuck at 'Download in progress. Do not disconnect cable.'
Well, I tried to root my LG Optimus Showtime using the information I found here but, unfortunately, once it was rooted, it rebooted about 5 minutes later on it's own and is now stuck in 'Download is in progress. Do not disconnect cable.' at boot. I can't get it to be recognized when I connect it to the PC (it's not currently plugged into anything, though it says don't disconnect the cable). I have tried every key combo and trick I can find.
Please, for the love of all things Andriod, PLEASE someone help me figure this out. I don't have another cell and can't afford to buy a replacement anytime soon.
The root seemed to go smoothly. Super-user, Poot, reboot, no problem and then, 5 minutes later, it rebooted itself and has been stuck ever since.
Please tell me someone has SOME idea what I can do?
I have tried about a dozen times to flash with the kernel tool I got from on here but as far as I can tell, the PC doesn't actually 'see' the phone anymore when I plug in the USB cable and connect it to the PC. The LG mobile software update tool doesn't recognize/read it's state, nor does the LG Flash tool I got from here. Neither one 'recognizes' the phone and therefore, it won't 'take' a flash.
I am open to trying anything to fix it, even sending it so someone if they think they can get it back to root or stock; I don't care which as long as it isn't a paperweight!
Any ideas?
Thank you in advance!
Fixing bricked showtine
mellie815 said:
Well, I tried to root my LG Optimus Showtime using the information I found here but, unfortunately, once it was rooted, it rebooted about 5 minutes later on it's own and is now stuck in 'Download is in progress. Do not disconnect cable.' at boot. I can't get it to be recognized when I connect it to the PC (it's not currently plugged into anything, though it says don't disconnect the cable). I have tried every key combo and trick I can find.
Please, for the love of all things Andriod, PLEASE someone help me figure this out. I don't have another cell and can't afford to buy a replacement anytime soon.
The root seemed to go smoothly. Super-user, Poot, reboot, no problem and then, 5 minutes later, it rebooted itself and has been stuck ever since.
Please tell me someone has SOME idea what I can do?
I have tried about a dozen times to flash with the kernel tool I got from on here but as far as I can tell, the PC doesn't actually 'see' the phone anymore when I plug in the USB cable and connect it to the PC. The LG mobile software update tool doesn't recognize/read it's state, nor does the LG Flash tool I got from here. Neither one 'recognizes' the phone and therefore, it won't 'take' a flash.
I am open to trying anything to fix it, even sending it so someone if they think they can get it back to root or stock; I don't care which as long as it isn't a paperweight!
Any ideas?
Thank you in advance!
Click to expand...
Click to collapse
The only thing you can do that I was able to do is to replace the mainboard. It takes about 10 minutes tops. go to phonepartsusa dot com and search for parts to the LG Venice, LG US730. The main board is less then $10. Then you have to deal with a new ESN. I was able to get a Showtime ie straight talk, mainboard for $8, I installed it and tried to activate it with the new ESN and it worked. Might be worth the $10 bucks.
Nos

[Q] Stuck in Odin mode "Could not do normal boot."

I recently got my new Verizon Galaxy S4 and decided to play around with it. I got it rooted fine and got a few apps on there (like Titanium backup) and decided that, since I would eventually want to play around with ROMs, I would want to unlock the phone.
I looked around and found there were some options for me, the one I chose being the "all in one" option that roots, unlocks and installs a custom recovery mode for you. I went through this process and now get nothing but the Downloader Mode (could not do normal boot). Even if I pop out the battery and try to reboot it, I get this screen.
I later found that apparently the ME7 model currently will not accept attempts to unlock the phone and install a custom ROM or recovery menu. How do I fix this? I tried using Odin, but it doesn't recognize the phone as being connected. I am currently trying other methods like Kies, to see if there is any way to at least to an emergency recovery and get it back to normal.
EDIT: Ran into the same issue with Kies as I did with Odin, it does not see anything connected to the computer.
Do you have the correct drivers installed? Does adb recognize the device? You're in Odin mode when you try to use Odin to push something? I believe with ME7 you can Odin back to the official stuff.
Sent from my SCH-I545 using Tapatalk 4
TheColdOne said:
I recently got my new Verizon Galaxy S4 and decided to play around with it. I got it rooted fine and got a few apps on there (like Titanium backup) and decided that, since I would eventually want to play around with ROMs, I would want to unlock the phone.
I looked around and found there were some options for me, the one I chose being the "all in one" option that roots, unlocks and installs a custom recovery mode for you. I went through this process and now get nothing but the Downloader Mode (could not do normal boot). Even if I pop out the battery and try to reboot it, I get this screen.
I later found that apparently the ME7 model currently will not accept attempts to unlock the phone and install a custom ROM or recovery menu. How do I fix this? I tried using Odin, but it doesn't recognize the phone as being connected. I am currently trying other methods like Kies, to see if there is any way to at least to an emergency recovery and get it back to normal.
EDIT: Ran into the same issue with Kies as I did with Odin, it does not see anything connected to the computer.
Click to expand...
Click to collapse
You need to make sure you have the drivers for the phone and have a solid USB connection (I prefer the rear of a tower)
sent from my GE gs4
I ended up getting it to work. I had to go here:
http://www.intel.com/support/chipsets/inf/sb/CS-013541.htm
and get files to get the computer to recognize the device. Even afterwards, Keis had no idea what was going on, and Odin saw it and was able to install a stock firmware I downloaded earlier, saving the phone.
For now I will be satisfied with just root access and will wait for ROM capabilities.
I hate to hijack a thread but I'm stuck here. My GS 4 (Vzw) was supposedly successfully rooted using TWRP, but now I have no way to enter any sort of recovery. The package I downloaded for the root does not have an Odin version to run. I've been getting the endless prompts to install the 4.3 update but there is no way to do this on my phone. I get the same "Could not do normal boot. Odin mode. Write protection enabled" message with the downloading screen. I try to boot into recovery via CWM or Goomanager but it always goes to the same screen. I can't make any backups or restore now either or I would just do a factory reset. Any ideas? I'm on VRUAME7.
Um.... there's no recovery available with ME7.... are you on the MDK bootloader?
Sent from your mom's smartphone
I don't think so but how would I confirm? I'm just trying to get the 4.3 update installed but at every attempt it goes into Odin Mode and gets stuck.
BoltsRUs said:
I don't think so but how would I confirm? I'm just trying to get the 4.3 update installed but at every attempt it goes into Odin Mode and gets stuck.
Click to expand...
Click to collapse
You're said that you're on ME7 - what you need to do is to flash the "No wipe" ME7 ROM onto your phone. It's in the Development forum.
http://forum.xda-developers.com/showthread.php?t=2301259
You've got to update to MI1 before you can install the 4.3 update (MJ7).
ONLY flash files intended for whatever release you're running. You can't mix and match, can't go backwards, and can't skip updates.
Theres also an ml1 factory image in the dev section.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
TheColdOne said:
I ended up getting it to work. I had to go here:
and get files to get the computer to recognize the device. Even afterwards, Keis had no idea what was going on, and Odin saw it and was able to install a stock firmware I downloaded earlier, saving the phone.
For now I will be satisfied with just root access and will wait for ROM capabilities.
Click to expand...
Click to collapse
Hi! Sorry to kind of "butt in" on your thread, but I'm somewhat of a noob and have the same exact problem as you. If you don't mind, can you explain what you downloaded from Intel and what you did afterwards that fixed your problem? I'd really appreciate it, since my phone's been dead to me for more than a week now....
nyankat said:
Hi! Sorry to kind of "butt in" on your thread, but I'm somewhat of a noob and have the same exact problem as you. If you don't mind, can you explain what you downloaded from Intel and what you did afterwards that fixed your problem? I'd really appreciate it, since my phone's been dead to me for more than a week now....
Click to expand...
Click to collapse
On that page I linked to, look for this:
Solution:
Download and run the Intel® Chipset Software Installation Utility so Windows* properly recognizes the SMBus controller.
Get the proper driver download according to your OS, then install it. This should allow Odin to see the phone for you to install a clean copy of the stock ROM onto the phone.
If you want more details I am sorry to say I cannot provide them. When things involve me fixing my own technology, it is a lot of rapid-fire troubleshooting and I just go with what sticks without really memorizing what I did (so if I run into this issue again, I have to re-research).
TheColdOne said:
On that page I linked to, look for this:
Solution:
Download and run the Intel® Chipset Software Installation Utility so Windows* properly recognizes the SMBus controller.
Get the proper driver download according to your OS, then install it. This should allow Odin to see the phone for you to install a clean copy of the stock ROM onto the phone.
If you want more details I am sorry to say I cannot provide them. When things involve me fixing my own technology, it is a lot of rapid-fire troubleshooting and I just go with what sticks without really memorizing what I did (so if I run into this issue again, I have to re-research).
Click to expand...
Click to collapse
Thanks! Finally Oden recognizes my phone
my amazing method
the same problem was with me 3-4 weeks ago...
follow the url-
dbloo dbloo dbloo dot autoroot dot chainfire dot eu
(i cant post the URL because the website is not allowing me.....understand and use the code)
1) choose your samsung model and download the recovery file
2) download and open odin on a dekstop
3) connect your device to the dekstop
4) press the volume down, home button and power button together till the screen changes
5) press the volume down button again
6) odin will show the message "attatched or connected"
7) click pda
8) attatch the file you downloaded
9) your device will be fixed and will be restarted
ur welcome
hai i am stuck at download mode with message as could not normal boot how to fix it

Soft-Bricked LG GT540 Optimus

Hello. I've tried using multiple ROMs in my rooted phone with KDZ Updater, and I guess that one of the updates hanged, or maybe it was something else... I really don't know. What I do know is that my phone currently isn't able to enter recovery mode, and is also not showing any boot logos (neither 'LG' nor 'Android').
I did see some threads about this, one of them talking about starting in Download Mode and using KDZ in CS_Emergency mode with some French ROM. Well, I tried that and as soon as I press "Launch software upgrade" the program freezes until I plug my phone off the PC.
I feel as if something was stuck in my throat and the only way to get it out is by completing this... so any help will be greatly appreciated!
PS: All this happened in the process of trying to install Cyanogen Mod 10.1 (which I did not try yet).
http://forum.xda-developers.com/showthread.php?t=1119531
Need to make sure to get the right firmware, DLL file, and make sure you have the right port set on the program.
es0tericcha0s said:
http://forum.xda-developers.com/showthread.php?t=1119531
Need to make sure to get the right firmware, DLL file, and make sure you have the right port set on the program.
Click to expand...
Click to collapse
Thanks for the reply!
I appreciate the info, and I'll be checking what you've said. All the links in that thread are inaccessible because Fileserve only lets you download what you upload. Anyway, I'm curious as to what this "DLL" file does on a smartphone... why do I need these things? I never heard of them being mentioned anywhere.
I'll start educating myself ASAP. Meanwhile, thank you very much (and by the way, if it's of help to anyone, my phone is a GT540g from Personal, Argentina.
You're welcome. Sorry, didn't check to see if the files were still there and most every other site just had reposts of the fileserve links. However, finally found what you need here:
http://files-gsm.ru/lg flesh/GT540gAT-00-V20a-722-34-DEC-28-2010+0.dz.zip
I found this dll for your phone but not sure if it works with the firmware you have for that version:
http://www.mediafire.com/download/9v9e78xronadm0c/GT540g_100506_MP.dll
"A dynamic-link library (DLL) file is an executable file that allows programs to share code and other resources necessary to perform particular tasks..."
Basically it ties together a few things in Windows to let the flash tool work for your specific device is my understanding. But they have to be specific to the phone or it won't run once it checks the build.prop of the phone vs the firmware you're trying to install.
Keep in mind, I do not have this phone and have no way to test if they will or won't work so just like any other mod or upgrade - you do so at your own risk.
Thanks, but...
First of all, I'm very sorry not to have replied before, but I've been busy. Anyway!
Thanks, I appreciate the links, but I don't understand where to put the .dll file in my phone. I know you'd think I'm an idiot who doesn't know how to use Google, but I actually did search beforehand. I simply don't get where to put it.
Also, if it's worth the shot, I just noticed that I should disable the "Modem" that activates when I plug my phone in. The problem is, KDZ just does this simple log [attached] and states "===FINISHED===" (Note that I have 2 Modems listed in my device manager [attached screenshot])
Solution GT540
Thanks for your help everyone, I came to a solution after a full year lol. Here's my enlightenment, from another Thread:
Just wanted to leave my 2 cents here, I've been trying to do my best since around august 2014, no success. 2 days ago I retried this, and I DID IT! I will tell everyone what I did very shortly:
My problem that I solved: I can boot, device works like a charm. But: no boot logos, no recovery.
My solution for TL;DR: UNINSTALL ALL DRIVERS FROM DEVICE MANAGER 1ST, then reinstall. After that, flash a fastboot ROM and use it to WIPE ALL THE DATA IN YOUR PHONE! THIS was what I needed and was never explained: you had to WIPE the old data in order to get the boot screens back.
IN THIS ORDER (THANK YOU to those people from previous replies, gathering all your info was of great value):
Uninstall all of your phone drivers from your PC!!! This is what made most of my headaches go away, just use Device Manager and uninstall anything from LGE. After that, plug in your device in your USB ports (always BACK ports, not front ports, important). It should detect all drivers and download them.
IF it fails (it generally does with LGE USB Modem), you can go to Device Manager > Unknown Device (the one that wasn't recognized) > Right Click and Update > Choose 2nd option, then choose "choose from a list of local controllers" (or whatever the button says). After that, scroll down to LG Electronics, Inc. and install what didn't install.
I also found these drivers, but I did not test them: http://www.mediafire.com/download/p693hcz6kkouh19/USB_Driver_LG_GT540.zip
Huzzah!
Now you're set to begin:
FIRST thing you wanna do is a factory reset, this is something I'd forgotten with time, don't make the same mistake as I did. You can do it by turning your phone on and pressing Volume +/- & Home & Quick Search buttons all together for 5 seconds (it works, be patient and wait for it, even if you open the camera or any other stuff).
Download this Google SDK Tools (unzip and put the folder in C:\ drive) and this Fastboot drivers for GT540 (unzip and put the files inside the folder in C:\android-sdk).
Skip this next line if you know your ROM has fastboot.
Now, if you don't have a ROM with fastboot, I recommend you use either European Open+Fastboot or V20C Orange France Fastboot ROM.
Click to expand...
Click to collapse
Since you have Fastboot enabled, now all you need to do is turn off your device (all this with its battery on it, no weird things) and hold the Camera button before turning it back on. This should take you either to a black screen, or simply to no display, like me. Either one will work anyways.
Now press the Windows key > Type cmd and open it with Right Click > Run as Administrator.
In it, type all this, command by command (you can paste by right clicking):
cd C:\android-sdk
fastboot -w
fastboot erase boot
fastboot erase system
fastboot -w
fastboot reboot
Click to expand...
Click to collapse
And now it's go time! Do what everyone else says in here: Take out your phone's battery, SD and SIM cards, fire KDZ Updater up as Administrator (If your KDZ freezes, then it's either faulty or you did not install msxml, look for a good KDZ that comes with that file and delete your current one), choose CS_Emergency PhoneMode and:
1-Plug your phone while holding the volume DOWN button (don't worry! My phone didn't show "Download Mode" either, if you hear the Windows "Somethingpluggedin" Bump noise, it's ok).
2-Flash French V20A
3-Unplug your phone once KDZ says "==FINISHED==".
4-Plug it once again, holding the volume DOWN button.
5-Flash out.kdz (remember! it's CS_Emergency).
Click to expand...
Click to collapse
THANK YOU XDA!

How To Remove Root or Unbrick LG K20 PLUS (Metro PCS)

Steps:
1. Turn Off Any Virus Protection Software
2. Download MP26010j_00_0316.kdz To Flash Your Phone Back To Stock
3. Install LGMobileDriver_WHQL_Ver_4.2.0.exe
4. Next Install LGUP_Store_Frame_Ver_1_14_3.msi
5. Make Sure That You Have Your Phone Connected (Take Battery Out Then Put It Back In Hold Volume Up And Connect With Micro USB) So LGUP Can Be Able To Recognize It
6. Then Double Click UPPERCUT.exe to open up LGUP Now But Only Thing Is That Uppercut will try to verify just ignore and if it doesn't open up just open lgup from desktop and its going to view phone as unknown
7. Unplug Phone But Keep LG Download Mode On And Exit LGUP
8. Open LGUP First And Then Connect Phone Which Should Recognize Phone As MP260
9. Click Upgrade, Make Sure That Bin Is Checked And Select File MP26010j_00_0316.kdz To Flash And Click Start
10. Your Done! Video Coming Soon
Links: https://mega.nz/#!EZcURRSD!NF_5MU4dJUpTknRcPMQWFVoYo4ePsGkoA0ndkkzVsmI https://mega.nz/#!dFNWFZZa!Rl3P7tJs7J51TtjcnaLwR3RHgGdRSco8NcJ9yog86J0 https://mega.nz/#!oVNSnYTB!3y9-P4t_8P-lj5sCXhFjO0R8J3j4Z_US-XCjVGysgEI https://mega.nz/#!pAUgGAwC!j5d3C8pUdQR5XMpqWBgLDu2O3tE99yWNa2nwXud3OSo
The Only Thing Im Disappointed Is That Every Time You Reboot Phone or Turn It On It Keeps Saying Lock Bootloader But Just Press The Power Button To Continue Repeating The Process Does Not Remove That Message
I Made This Tutorial For Some People That Have Trouble With Apps That Detect Root
Phone dont turn on at all
yesterday i rooted my k20 mp260 then this morning i wanted to revert back to stock and no root, i tried to unroot it but i didnt follow this cause i didnt find it til now,but i got rid of root and then i tried to update via ota and it went into twrp and then it was installing until it just went black, like it shut off now it doesnt power on. when i plug it in to pc it finds it but it cant install the driver. any help to try to Resurrect from the grave would be great ​
Just a Heads up there is a new version out, as of 9/01/17
MP26010r_00_0817.kdz
download link
https://lg-firmwares.com/lg-mp260-firmwares/
fyi u can get rid of the bootloader bootup annoyance by following the unlock bootloader instructions but instead of typing fastboot oem unlock type fastboot oem lock
shaneg79 said:
fyi u can get rid of the bootloader bootup annoyance by following the unlock bootloader instructions but instead of typing fastboot oem unlock type fastboot oem lock
Click to expand...
Click to collapse
If you lock the bootloader if you have custom recovery (twrp) and superuser you will not be able to boot
New Optimus said:
If you lock the bootloader if you have custom recovery (twrp) and superuser you will not be able to boot
Click to expand...
Click to collapse
Correct but this thread was about removing root
shaneg79 said:
Correct but this thread was about removing root
Click to expand...
Click to collapse
ah, I thought that was in the original post or implied if completely unrooting.
New Optimus said:
Just a Heads up there is a new version out, as of 9/01/17
MP26010r_00_0817.kdz
download link
https://lg-firmwares.com/lg-mp260-firmwares/
Click to expand...
Click to collapse
Any link for the T-mobile variant?
I looked all over and reached the end of internet but couldn't find , lol!
meazz1 said:
Any link for the T-mobile variant?
I looked all over and reached the end of internet but couldn't find , lol!
Click to expand...
Click to collapse
Here
kc6wke said:
Here
Click to expand...
Click to collapse
Thanks
meazz1 said:
Thanks
Click to expand...
Click to collapse
Looked and saw two links for the newest kdz. I'm in the USA so TMO =north america.
But I 'm curios what TMI stands for, no info on that page of region listings.
meazz1 said:
Looked and saw two links for the newest kdz. I'm in the USA so TMO =north america.
But I 'm curios what TMI stands for, no info on that page of region listings.
Click to expand...
Click to collapse
Not sure about TMI, use TMO North America
I figured I'd post this here to, because I am thinking about getting this phone. It's $99 at metro pcs right now, that's really hard to pass up.
In a twrp+root thread there are some that cannot get root, with the last LG firmware update, so I'm guessing this is a soft brick as apposed to a hard brick.
So, had a question.
If in the case of the like 10% of the people that do this root, the phone won't root or bricks, if I get this phone and and that happens, is it possible to flash the phone via the LG program, with a KDZ file and go back to stock like in this thread? If so I will probably buy this phone tomorrow (crosses fingers the kdz trick will work)
From looking at the videos, it looks as if the LG program is similar to the Samsung Odin program as far as flashing goes, am I correct in this?
...
Sent from my [device_name] using XDA-Developers Legacy app
I know this thread has not been active for a while. However I have a Metro LG K20 Plus phone and want to change the firmware to T-Mobile. I have not been successful doing this as I always get invalid firmware, because LG UP recognizes the phone as a metro phone. Is there a way to succeed in getting the T-Mobile firmware on the phone?
thanks in advance.
Stoner101 said:
yesterday i rooted my k20 mp260 then this morning i wanted to revert back to stock and no root, i tried to unroot it but i didnt follow this cause i didnt find it til now,but i got rid of root and then i tried to update via ota and it went into twrp and then it was installing until it just went black, like it shut off now it doesnt power on. when i plug it in to pc it finds it but it cant install the driver. any help to try to Resurrect from the grave would be great ​
Click to expand...
Click to collapse
Did you find any answers to this? I have one that is bricked. It will not show up when connected to a computer at all
Virus warning from Avira in Uppercut
lg k20 plus soft bricked?
So I've searched high and low and have tried suggestion after suggestion with no avail. To start things off, I have a soft bricked LG k20 plus. Everything was working fine until the other day when I went to flash a kernel, and when the phone restarted, the screen was a dark grey/black color. I rooted the devices using massis method, removed SU and then rooted using Magisk. Like I said everything was working fine and for whatever reason I decided to try a different kernel. That's when it all went downhill. So now when I turn the phone on, the screen is still blank but it vibrates. When I've connected it to a computer, on my Mac it doesn't show up with ADB or FASTBOOT but in my device tree it comes up as LGE Android device. I borrowed my friends laptop since it runs windows, and my Mac is a dinosaur. ADB doesn't pick it up either, but in a USB hub it says the same thing, LGE Android device and lower down it comes up as TP-LINK. Now tryin to use LG Flash tools doesn't work, LGUP doesn't see my device, and when I tried to extract the KZD file, when I go to select it from the list there is no file to choose. Since I can't see anything on my screen, I can't tell if I'm in download mode, bootloader, etc, but in my device tree sometimes my phone will pop up an bootloader interface and I can use fastboot commands. When I was last able to see my screen, yes, USB debugging was on, I had a recovery, but since I can't see anything on my screen I can't seem to boot into recovery. If I could I would wipe cache and all. I think I may have read too many article and suggestions as to what to do because nothing seems to be working, and don't seem to find anything else related closely enough to my issue. Anyone have a clue as to where I should start? I'll have to give my friend back her laptop soon, and since my mac is so old, and the whole PC vs Mac feud, my computer won't be of much help. Any advice my hair strands would greatly appreciate before they rest are pulled out lol

Categories

Resources