Hello, I am a newbie Android user and I have been exploring the greatness of the OS for few days now.
Just now I tried to update my firmware to 2.3.5 and followed instruction from a non-xda developer site and little did I know, it messed up my phone big time.
While I was loading all the files (CSC, tar, modem, etc), and I should've known better when the site told me to check the "re partition" box, but I was stupid enough to go along with it.
So Odin got stuck at re-writing the modem or something like that and I had to pull out the battery from the phone.
Now the phone turns on only in recovery mode and none of the recovery choices work, if I choose one it just shows a little green android with white bordered triangle with an orange exclamation mark in the middle.
I can still access the download mode by using conventional button pressing method, but my phone is NO LONGER RECOGNIZED through the USB so I cannot flash the old stock firmware...
Is there a fix for this? If anyone can help me resolve this issue I am willing to compensate very well in return...
Thank you so much for reading my convoluted troubled story, and I really hope to find some resolution in your wisdom.
If u can't reflash your farmware
Than their is only one option left
give it to the Samsung service center they will repair your phone
Sent from my GT-S5570 using xda premium
I'd be down to do so but it will be hard as I have 4 custom binary flash counter... What can I do as of now?
i dont know if this helps you out buddy but maybe if you read in this thread you might find people that had the same trouble as you..just try and search the thread first and if nothing comes up try and read the first page maybe there you might get an idea on how to unbrick the phone
http://forum.xda-developers.com/showthread.php?t=1075278
Thank you.. But I unfortunately did not follow the instructions that is written there I used an external source which told me to check "re partition" which completely messed up the phone, I think. Thank you for your input, though.
sfoksn said:
Thank you.. But I unfortunately did not follow the instructions that is written there I used an external source which told me to check "re partition" which completely messed up the phone, I think. Thank you for your input, though.
Click to expand...
Click to collapse
i dont want to advice you wrongly but you say you can get into download mode right? if it was my phone i would try and flash again but this time using the proper way to do it....but its down to you my friend i dont want to say do it and it gets worse..
EDIT: apologies i just saw that your usb is not recognised...do you have kies on the background when you flash with odin?
Check this unbricker
android-roms.googlecode.com/files/DREAIMG-RC29.zip
Download DREAIMG-RC29.zip and unzip the file.
Reformat the SD card to FAT32 and copy the DREAIMG.nbh onto it.
Safely eject the SD card.
Put the SD card into your device.
Step 3: Wipe The Phone
Hold home and press the power button.
When you see the image of an ! mark, open your keyboard and press Alt + L if you cannot see any command options.
Do a factory reset by pressing Alt + W or just using the trackball.
When the reset is done, go ahead and hold the camera button and select the reboot system now option with your trackball.
Step 4: Flashing The Phone
Once the grey screen pops up (or the white screen if your phone was rooted with JesusFreke) it will ask you to hit a button to start installing the image…press that button. DO NOT DO ANYTHING TO STOP THIS PROCCESS. It will take about 8-12 minutes.
When the image has completed the installation (it will say completed), go ahead and press the green, red, and menu buttons at the same time. The phone will reboot.
And your done! Your phone is now unbricked!.
If this helps u buy me a HTC sensation.
debsattam said:
Check this unbricker
android-roms.googlecode.com/files/DREAIMG-RC29.zip
Download DREAIMG-RC29.zip and unzip the file.
Reformat the SD card to FAT32 and copy the DREAIMG.nbh onto it.
Safely eject the SD card.
Put the SD card into your device.
Step 3: Wipe The Phone
Hold home and press the power button.
When you see the image of an ! mark, open your keyboard and press Alt + L if you cannot see any command options.
Do a factory reset by pressing Alt + W or just using the trackball.
When the reset is done, go ahead and hold the camera button and select the reboot system now option with your trackball.
Step 4: Flashing The Phone
Once the grey screen pops up (or the white screen if your phone was rooted with JesusFreke) it will ask you to hit a button to start installing the image…press that button. DO NOT DO ANYTHING TO STOP THIS PROCCESS. It will take about 8-12 minutes.
When the image has completed the installation (it will say completed), go ahead and press the green, red, and menu buttons at the same time. The phone will reboot.
And your done! Your phone is now unbricked!.
If this helps u buy me a HTC sensation.
Click to expand...
Click to collapse
Thanks for such detailed instruction! Would this method work if my phone is no longer recognized by the computer though? Please clarify what you mean by "open your keyboard" and the subsequent steps...
Thank you, once again!
sfoksn said:
Thanks for such detailed instruction! Would this method work if my phone is no longer recognized by the computer though? Please clarify what you mean by "open your keyboard" and the subsequent steps...
Thank you, once again!
Click to expand...
Click to collapse
Yeah it althrough works . Try it its helps he to unbrick ma t mobile oncemay be It works on ur phone to
Sent from my GT-S5570 using xda premium
Ah I see. Could you please help me understand what you mean by "open keyboard?" I just don't see how I could open keyboard on my SGS2 when it isn't recognized by my computer... If you could clarify what you mean by that it will be really appreciated!
So from your information provided, you have a stock recovery and your phone is semi-bricked. You can still boot and your computer won't recognize your phone.
Do you have a jig? What firmware did you flash? You could use a jig to reset the flash counter on the phone and return it for warranty saying that Kies messed up while upgrading firmware. If you've flashed the KI3 with the new bootloader then the jig won't be able to clear the flash counter.
EDIT: Maybe an experienced senior member might come and look at this thread and provide some other solution. Do wait!
EDIT2: Try reinstalling Kies and the drivers. Don't give up just yet!
sfoksn said:
Ah I see. Could you please help me understand what you mean by "open keyboard?" I just don't see how I could open keyboard on my SGS2 when it isn't recognized by my computer... If you could clarify what you mean by that it will be really appreciated!
Click to expand...
Click to collapse
I don't think that the guide he posted is particularly for galaxy s2 because he also mentioned a trackball...
but if you can go the settings he mentioned you might find something and lead you.
And if you decide to bring the phone to samsung you might want to have a read at Intratechs Official firmware
thread in (Original Android Development)there you can find a bootloader that you can flash so you can use the jig to reset the counter
edit: wow I also failed to read that your computer can't recognise your phone
anymore....
Have you tried to delete the samsung drivers when you go to
your hardware settings?? and let windows find it's drivers again?
Not sure if this will help. I read somewhere someone else with their PC not really recognizing the phone. Someone else advised to unplug the phone and remove the battery then connect to PC insert battery and put it into download mode.
I could be wrong with the method. Its just from my memory.
Also this may make no difference but maybe removing the sim and SD card. Someone will probably call me stupid for suggesting that though.
I wouldn't try that unbrick method mate. That looks like it is an unroot for an old phone..possible the G1 (AKA HTC Dream).
Thanks for all the help... I have been trying to uninstall the driver and reinstall it but no luck. If I could just get the phone to be recognized I think I will be fine, but I just don't know what to do
Thank you for all the suggestions, please keep them coming!
EDIT: this is the guide I used that messed up my phone.. http://androidflip.com/install-andr...-samsung-galaxy-s2-gt-i9100-installing-guide/
EDIT: Tried to reinstall KIES, no luck. It's like there's nothing on the other side of the USB cord... Not even a sound when I plug the phone in...
If it had been via XDA the instructions are do not do what they are saying .
In Odin Select Re-Partition , Auto Reboot and F.Reset Time
In Odin select these files
For PIT select u1_02_20110310_emmc_EXT4.pit
BIG BIG NO to the above .
As usual some stuff ripped from XDA and some from elsewhere .
My suggestion would be one buy USB jig it hopefully will clear the rom counter and enter download mode .
two in recovery mode go to mounts and storage and format cache data dalvik system and sd card .
Clean phone with nothing on it .Flash stock firmware .
http://forum.xda-developers.com/showthread.php?t=1075278
If PC does not now recognise phone either try another PC or return phone to service centre and say it failed on a Kies upgrade .
jje
Go through the following steps on your PC or laptop:
1. Go to Start
2. Panel
3. Programs and Features
4. Windows features on or off (then a list compiled, this can take several seconds).
5. Then you see a check stand Microsoft. NET Framework 3.0 or 3.5 (if not, tick)
6. Open the sub folders with the + and then be there for the 3 sub folders a checkmark (if not checked, any configuration takes several minutes)
- Windows Communication Foundation HTTP Activation
- Windows Communication Foundation Non-HTTP Activation
- XPS Viewer
7. Then click OK
8. Now start up your computer.
9. Now you choose to uninstall through Programs and Features
10. Also remove the Samsung USB Driver.
11. Then download the latest version of Kies on the Samsung site and install it.
12. Now launch the program Select Samsung and go to the Tools tab.
13. Then click on drivers.
14. Once this is complete close the Galaxy S2 with the USB cable to your computer.
15. If all is well you now have access to your phone via the USB connection.
If there are any questions, you can leave a response below.
I am not sure if this will help but you might want to have a try. I got this
from a Dutch website. I google translated it for you and hoping you wont
have trouble reading it. This is one of the guides posted when some of us
here couldn't connect our phone with the usb cable.
droidluck said:
Go through the following steps on your PC or laptop:
1. Go to Start
2. Panel
3. Programs and Features
4. Windows features on or off (then a list compiled, this can take several seconds).
5. Then you see a check stand Microsoft. NET Framework 3.0 or 3.5 (if not, tick)
6. Open the sub folders with the + and then be there for the 3 sub folders a checkmark (if not checked, any configuration takes several minutes)
- Windows Communication Foundation HTTP Activation
- Windows Communication Foundation Non-HTTP Activation
- XPS Viewer
7. Then click OK
8. Now start up your computer.
9. Now you choose to uninstall through Programs and Features
10. Also remove the Samsung USB Driver.
11. Then download the latest version of Kies on the Samsung site and install it.
12. Now launch the program Select Samsung and go to the Tools tab.
13. Then click on drivers.
14. Once this is complete close the Galaxy S2 with the USB cable to your computer.
15. If all is well you now have access to your phone via the USB connection.
If there are any questions, you can leave a response below.
I am not sure if this will help but you might want to have a try. I got this
from a Dutch website. I google translated it for you and hoping you wont
have trouble reading it. This is one of the guides posted when some of us
here couldn't connect our phone with the usb cable.
Click to expand...
Click to collapse
Thanks, I tried to do this but unfortunately the problem persists... What do you think the root of the problem is? I just dont' get it why it won't be recognized anymore.. I feel like I could easily get it to work if I could just get it to become recognized to flash stock firmware....
EDIT: JJE, I would turn it into the service place but I have custom rom count of 4 And I don't have any USB jigs to work with either.... I am still within the 15 days of the phone purchase day, would they be willing to swap my phone?
BUMP, any input would be appreciated...
Related
hello friend, Raj here.
I have been using the X10i since past 6 months. I bought the phone my UAE & i am presently using it in India.
1) Is there any firmware upgrade available for my phone?
My phone info says-
Model - X10i
Firmware - 1.6
Baseband version - 1.0.14
Build number - R1FA014
2) My phone does not have the Android market application inbuilt in it! how & from where do i download that app?
3) How do i install applications downloaded to my computer from Android market, to my phone?
4) I am not able to access Calender since it requires me to log in to my Gmail account. everytime i try to do that, it says "error, try next time"! is there any way i can start the calender without registering?
Thanks.
raj_5004 said:
1) Is there any firmware upgrade available for my phone?
Click to expand...
Click to collapse
Hi.
Yes there is, considering a lot of us are running R2BA026, that should give you an idea of how far behind you are.
raj_5004 said:
2) My phone does not have the Android market application inbuilt in it! how & from where do i download that app?
Click to expand...
Click to collapse
Personally, I would debrand and update your handset with UK generic FW, which will give you the Market app, which will answer question 3, and as you need to register for the Market to use it, that also answers your 4th question.
1) Install SEUS (Sony Ericsson Update Service).
You can get it from here: http://www.sonyericsson.com/cws/download/1/110/61/1275980198/Update_Service_Setup-2.10.6.21.exe
2) Run SEUS, follow the prompts. You don't need to update the phone through it, but get the phone ready for updating. This process should install the drivers necessary for the rooting process.
Note: I suggest you keep your USB cable attached to that USB port. Remember which USB port of your computer it's attached to, as changing USB ports can lead to a bit of confusion for the next 2 steps!
3) To check if #2 was successful, click on Start, click Run, and type: regedit
In the Registry Editor that pops up, click on Computer, press CTRL+F, and search for this: USB\Vid_0fce&Pid_adde\
After it's finished finding, on the right side you'll see DeviceInstance, then it says REG_SZ, then it says something like USB\Vid_0fce&Pid_adde\5&270d2a78&0&3
You'll need that last bit (in this example: 5&270d2a78&0&3 Yours would probably be different). This is your DeviceID (you'll need it soon!)
Note: You may have multiple of these if you plugged the USB cord into many USB ports on your computer. Each USB port will give a different DeviceID, so if you have more than one DeviceID, you'll have to choose one, and if it doesn't work (you'll find out when you reach #5!) you will have to choose another one.
Alternatively, download the file in the next step and extract it, go to the folder called 1st, and run the DeviceID.jar file. It should give your DeviceID
4) Download this:
http://filevo.com/1nlq8wryo11u.html
or from here: http://rapidshare.com/files/404363083/i_R1FA16_ft.rar.html
Extract it.
In the step1 folder, you'll see a file called DeviceID.txt
Open it up, delete whatever's there, and put YOUR DeviceID (that you found from the previous step).
Save the file and close notepad.
Note: Make sure there are no extra spaces or lines after/before the DeviceID. The ONLY thing that should be in the file is your DeviceID, NO SPACES/LINES (for example, only this: 5&270d2a78&0&3 [yours will probably be different])
5) Take out the USB cable from your phone (leave it plugged into your computer)
Turn your phone OFF
Open up step1.cmd (it's not inside the step1 folder, but outside it), but DON'T PRESS ANYTHING
Now we have to put the phone into flash mode. This is how you do it:
Hold the Back button on your phone, and while holding the back button, insert the USB cable into the phone.
A green light should come on the phone (like when it's charging or a missed call)
Quickly "Press any key to continue..." in the open step1.cmd window.
Let it finish what it's doing. It will say "Press any key to continue..." after it's finished. Until then, DON'T touch anything!
If you get problems in this step, refer to this post:
http://forum.xda-developers.com/showpost.php?p=6970868&postcount=3
Here's a helpful video for common java issue: http://forum.xda-developers.com/showthread.php?t=713457
After completion, this will give you a Generic X10i R1FA016 firmware (check it by pressing the left button, go to settings>about phone and at the very bottom under build number)
Click to expand...
Click to collapse
- Newbies Guide to Rooting X10 and giving you the newest firmware!
Follow those steps and when you've completed them run SEUS which should update you to R2BA026, and give you the Market app. If you run in to any issues read the links provided as the chances are it will be user error if you do.
Thanks a lot buddy.
Will de-branding my phone affect future upgrades to Android 2.1 in any way?
Also, why is de-branding necessary to access calender???
raj_5004 said:
Will de-branding my phone affect future upgrades to Android 2.1 in any way?
Click to expand...
Click to collapse
Nope, apart from you'll be the first in line to get it.
raj_5004 said:
Also, why is de-branding necessary to access calender???
Click to expand...
Click to collapse
It isn't, but if want to use the Market you are going to need a gmail account.
I tried using SEUS but failed at step 2 itself!
It says press back button while inserting USB cable in phone & keep pressing back button. i did the same & waited & waited for 5 minutes, but no response!
then my finger started hurting & i had to abort the process! does it take so long?
raj_5004 said:
I tried using SEUS but failed at step 2 itself!
Click to expand...
Click to collapse
You're not doing it right, should take about 5 seconds for seus to recognise the phone. Try again.
Sorry for the back-to-back posts, but can i update my phone country to India instead of UK? i think Indian X10s do get Android Market. Since i am using the phone here in India & in future would like to get this serviced in india itself, i would prefer my phone to show India in country!
It honestly doesn't matter. I'm in Canada but I'm using a Latin American firmware. But yes, to get it serviced I guess you need it. How about asking someone with the Indian firmware to dump it for you?
That is precisely the reason i am looking for the indian version instead of UK.
None of my friends have a X10 & strangely, even google dint yield any satisfactory results.
I will opt for the UK update only if Indian update is not available.
Also, i am still not able to open the calender using my gmail account. evertime it says "error! try again later" !!!
raj_5004 said:
That is precisely the reason i am looking for the indian version instead of UK.
None of my friends have a X10 & strangely, even google dint yield any satisfactory results.
I will opt for the UK update only if Indian update is not available.
Also, i am still not able to open the calender using my gmail account. evertime it says "error! try again later" !!!
Click to expand...
Click to collapse
so did you manage to update to a newer firmware yet? you said a while back that "holding the back button" did not work. You need to have the phone off before you do this step.
1. turn phone off
2. connect usb cable to phone, but not to pc.
3. open SEUS and get to the stage that it says waiting for phone connect.
4. press and hold the back button (which will power your phone on in flash mode) and connect the USB cable to pc.
SEUS should now say "stop pressing back button" or something to that effect.
mrtim123 said:
so did you manage to update to a newer firmware yet? you said a while back that "holding the back button" did not work. You need to have the phone off before you do this step.
Click to expand...
Click to collapse
No, it still dint work. i tried it thrice & following all instructions carefully. i had the phone switched off.
1. turn phone off
2. connect usb cable to phone, but not to pc.
Click to expand...
Click to collapse
in SEUS, it says first connect USB cable to PC, then to phone.
3. open SEUS and get to the stage that it says waiting for phone connect.
4. press and hold the back button (which will power your phone on in flash mode) and connect the USB cable to pc.
SEUS should now say "stop pressing back button" or something to that effect.
Click to expand...
Click to collapse
Nothing like this happens in my case. Dont know whats wrong!
Guys, i managed to install Astro File Manager over the air! i did install a few apps to my comp & then to my phone using AFM but not all apps are available to install on the comp! thats the reason i needed Android Market on my phone.
Also, i dont understand why i cant register to google through my phone as i have to use the phone calender.
Guys, it re-installed SEUS & it detected my phone but i again failed! i am dumb!!!
1) Install SEUS (Sony Ericsson Update Service).
You can get it from here: http://www.sonyericsson.com/cws/down...-2.10.6.21.exe
2) Run SEUS, follow the prompts. You don't need to update the phone through it, but get the phone ready for updating. This process should install the drivers necessary for the rooting process.
Note: I suggest you keep your USB cable attached to that USB port. Remember which USB port of your computer it's attached to, as changing USB ports can lead to a bit of confusion for the next 2 steps!
3) To check if #2 was successful, click on Start, click Run, and type: regedit
In the Registry Editor that pops up, click on Computer, press CTRL+F, and search for this: USB\Vid_0fce&Pid_adde\
After it's finished finding, on the right side you'll see DeviceInstance, then it says REG_SZ, then it says something like USB\Vid_0fce&Pid_adde\5&270d2a78&0&3
You'll need that last bit (in this example: 5&270d2a78&0&3 Yours would probably be different). This is your DeviceID (you'll need it soon!)
Click to expand...
Click to collapse
I reached till here & searched for "USB\Vid_0fce&Pid_adde\" but no files were detected!
then i searched for "USB\Vid_0fce&Pid_adde" & i found a file which says-
MatchingDeviceId Reg_SZ usb\vid_0fce&Pid_adde
Thats it! no device ID in front of it!
raj_5004 said:
Guys, it re-installed SEUS & it detected my phone but i again failed! i am dumb!!!
Click to expand...
Click to collapse
Can you clarify, did you get into flash mode for it to install the drivers?
I re-installed SEUS. then I started SEUS, switched off my phone for 30 secs, connected USB cable to computer, then connected USB cable to phone while pressing the back button & kept pressing the back button until the phone got switched ON.
then SEUS asked me to open Notification bar & turn ON USB. i left the back button & did the same. then the screen showed "X10i connected" & your phone is up to date!
then i tried whatever you had mentioned but it was of no use as mentioned in my post above.
Also, SEUS detects my phone only 1 out of 5 times. the remaining times, it takes soooooo long that i have to abort the process & SEUS hangs!
Also, i have noticed that in my SEUS, in the phone models where you have to select your phone, there are two options, both which look like an X10 with names "X10" & "SO-01B". which one should i select? i tried with X10 but failed. then i tried with SO-01B & it dint detect.
You problem is that seus is not detecting your device..
Soln... User a laptop with win xp or vista or 7 32 bit...
Do a complete uninstall of seus. Clean the registry of any seus entries..
Reinstall seus..
Use a different usb port.
Now try..
The device is an x10 unless you your it from japan which if the case is then it is the so-o1.
If you want dump of indian firmware I can help you but I dont think a dump will be of much use to
You..
Chetan
raj_5004 said:
I re-installed SEUS. then I started SEUS, switched off my phone for 30 secs, connected USB cable to computer, then connected USB cable to phone while pressing the back button & kept pressing the back button until the phone got switched ON.
then SEUS asked me to open Notification bar & turn ON USB. i left the back button & did the same. then the screen showed "X10i connected" & your phone is up to date!
then i tried whatever you had mentioned but it was of no use as mentioned in my post above.
Also, SEUS detects my phone only 1 out of 5 times. the remaining times, it takes soooooo long that i have to abort the process & SEUS hangs!
Also, i have noticed that in my SEUS, in the phone models where you have to select your phone, there are two options, both which look like an X10 with names "X10" & "SO-01B". which one should i select? i tried with X10 but failed. then i tried with SO-01B & it dint detect.
Click to expand...
Click to collapse
cvchetan said:
You problem is that seus is not detecting your device..
Soln... User a laptop with win xp or vista or 7 32 bit...
Click to expand...
Click to collapse
Sadly, i dont have a laptop, i am not a laptop person!
Do a complete uninstall of seus. Clean the registry of any seus entries..
Reinstall seus..
Use a different usb port.
Click to expand...
Click to collapse
I tried all the above but in vain!
The device is an x10 unless you your it from japan which if the case is then it is the so-o1.
Click to expand...
Click to collapse
Thanks for confirming that.
If you want dump of indian firmware I can help you but I dont think a dump will be of much use to
You..
Chetan
Click to expand...
Click to collapse
yes, i would like to have the Indian firmware as that would make servicing my phones in India easier!
Can you tell me the disadvantages of having the Indian firmware when compared to the UK one?
I read that even Indian firmware has Android market & even India is getting a upgrade to Android 2.1 along with UK.
I tried using SEUS with different USB port & my phone was detected but again i found no DEVICE ID! the same thing happened which i have written in Post #14.
Is there any other method to find DEVICE ID? i even tried this-
Alternatively, download the file in the next step and extract it, go to the folder called 1st, and run the DeviceID.jar file. It should give your DeviceID
Click to expand...
Click to collapse
It shows a blank screen!!!
raj_5004 said:
then SEUS asked me to open Notification bar & turn ON USB.
Click to expand...
Click to collapse
SEUS doesn't ask you to do that, PC Companion does though. I've never known anyone have such problems getting SEUS to run.
Hello, I was attempting to flash Clockwork Mod on my G5, whilst doing it Odin crashed and now my phone is messed up.
It will turn on but a PC-Triangle with a ! in the middle-Phone, it will go into Download Mode but Odin doesn't recognise it so i can't re-flash it, any ideas?
Please help, this is urgent.
The phone itself is on stock, it turns on but displays the error i have described above, it will go into download mode but Odin doesn't recognsie it.
Thanks, Curtis.
CurtisAndroid5 said:
Hello, I was attempting to flash Clockwork Mod on my G5, whilst doing it Odin crashed and now my phone is messed up.
It will turn on but a PC-Triangle with a ! in the middle-Phone, it will go into Download Mode but Odin doesn't recognise it so i can't re-flash it, any ideas?
Please help, this is urgent.
The phone itself is on stock, it turns on but displays the error i have described above, it will go into download mode but Odin doesn't recognsie it.
Thanks, Curtis.
Click to expand...
Click to collapse
No need to worry about it.
Uninstall the drivers associated with the phone. Are you using Windows?
For XP: Go to start > Control Panel > System > Click on the Hardware tab and then Device Manager. Find the driver for the phone. I remember it has a yellow icon, and the drivers name is a mix of capital letters
It's probably similar for Windows 7, but i wouldn't know.
Uninstall the driver associated with the phone, then reinstall by plugging your phone into the computer in download mode. It would help to uninstall and reinstall Odin as well, just in case.
If you get Odin to work, just work away like you would.
Thanks for your reply, i have uninstalled the drivers, but when i plugged my phone back in, the drivers are not being installed and i can not find them on the internet. Any ideas?
I know how i messed up, i completely forgot to root my phone before i started to flash, any ideas on how i can just get my phone back to its normal working everyday self?
Will i just need to get the device recognised by Odin then insert the Ops file and the I5500.tar file and flash it back to stock?
edit- managed to get drivers installed, now how do i fix my phone? Just flash the .OPS and the stock I5500.tar file?
CurtisAndroid5 said:
Thanks for your reply, i have uninstalled the drivers, but when i plugged my phone back in, the drivers are not being installed and i can not find them on the internet. Any ideas?
I know how i messed up, i completely forgot to root my phone before i started to flash, any ideas on how i can just get my phone back to its normal working everyday self?
Will i just need to get the device recognised by Odin then insert the Ops file and the I5500.tar file and flash it back to stock?
edit- managed to get drivers installed, now how do i fix my phone? Just flash the .OPS and the stock I5500.tar file?
Click to expand...
Click to collapse
I think it'll fail again if your phone isn't rooted. You can't get rid of the Computer-Caution-Phone image without succesfully using Odin.
You could try to flash the .tar and .ops file again. I can't see it working though unfortunately.
Any ideas then? Is there a way to root my phone via Odin or anything?
CurtisAndroid5 said:
Any ideas then? Is there a way to root my phone via Odin or anything?
Click to expand...
Click to collapse
I've never heard of rooting your phone through the download mode or through Odin.
Maybe there's a file you can put on your phone through Odin which doesn't require root? I'll take a look around for you.
Thank you so much, i appreciate it, I'm 16, can't really live without a phone especially with college parties coming up in the next few days aha, I knew i shouldn't of risked around with flashing again!
CurtisAndroid5 said:
Thank you so much, i appreciate it, I'm 16, can't really live without a phone especially with college parties coming up in the next few days aha, I knew i shouldn't of risked around with flashing again!
Click to expand...
Click to collapse
Just thinking that Odin is a program which requires root so there won't be any file you can transfer when unrooted. I had a quick glance over at the Odin thread, and the first step is that you have to root your phone.
I'm sorry, but there's nothing else I can think of which might help. Maybe if somebody with a bit more knowledge/expeerience sees this thread, they might help.
Can Odin detect your phone?
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
CurtisAndroid5 said:
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
Click to expand...
Click to collapse
I don't know of any others, but Superoneclick works fine for the Galaxy 5. Like I said, I've never heard of using it during download mode so just be careful with that.
If Odin detects your phone, have you tried just closing Odin and plugging out the USB safely?
Can't use Superoneclick as my phone isn't in USB Debugging and i obviously can't change that aha I have just tried that, no luck with the closing Odin and unplugging it, should i try installing CWM again or is that a bad idea?
CurtisAndroid5 said:
Can't use Superoneclick as my phone isn't in USB Debugging and i obviously can't change that aha I have just tried that, no luck with the closing Odin and unplugging it, should i try installing CWM again or is that a bad idea?
Click to expand...
Click to collapse
It's a bad idea because it just won't work. Odin will crash again.
I don't know what to do I'm afraid.
Looks like my phone is shagged due to my own stupidity, I forgot to root it because my phone was previously rooted and it went back for repairs, then I completely forgot i didnt install Root access -.-
Do you think i can recover my phone or is it well and truly gone?
Well it's not like your phone is bricked or anything. It's just broken a connection to Odin and it won't boot until it's completed.
You could always return it for repairs again. Your warranty might be broken though.
If I happen to come across a DIY fix then I'll post it here.
Thanks for your help mate, i've decided to just send my phone back for repairs, buy a new phone (Probably a Blackberry for BBM and stuff with all my mates), and sell my phone once i get it back.I have gave up on Samsung mobiles.
Thank you.
Did you send your phone alredy? Uncompress the firmware.tar file and unselect "one package in Odin" . On the boot in odin select the boot file of the .tar and run odin. Maybe that will help
Sent from my Galaxy5 using XDA App
Dude have u tryd using samsung kies it might detect it n let u do an emergancy firmware recovery or maybe (a verry unlikely maybe but still a maybe) it will detect the problem and provide u a solution hope this helps.
CurtisAndroid5 said:
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
Click to expand...
Click to collapse
Hi, had the very same issue as you. Odin crashed just few sec after start. What I did ; uninstalled everything (Odin & files comes with it, KIES). Then restart PC, go to Samsung.com and download latest KIES, when downloaded go to Tools and check for updates. Accept/run them, when done restart PC. Now, read the steps bellow, and see the attached picture.
1. Extract Odin v4.28 and Ops File.zip I5500XXXX.rar
2. Open Odin v4.28,
- Select OPS tab: EUROPA_v1.0.ops
- Make sure Auto Reboot & Protect OPS selected in Option tab
- get this I5500XFJPQ from samfirware.com ( for some strange reason only this package worked!), download, and unzipp to folder called GT-I5500. In to this folder place Odin and ops as well.
- Make sure One Package selected in Option tab
3. Turn off phone, remove battery for 5second, put it back
4. Hold "Volume Down, Center button & Power button" in the same time to enter Download Mode (yellow triangle)
5. Connect to PC with USB cable
6. When the data line and the phone connection is successful, com port shows yellow in Odin
7. Press Start on Odin
8. Waitin & Pray!
9. PASS, its done!
*Hard reset after flashing *2767*3855#
*Check ur Phone Info *#*#1234#*#*
Note: my i5500 was rooted, so if was yours then ok. When pressing buttons you must see an yellow triangle! If you don't see it don't try connect. Remove battery for 3-5 minutes and try again...
Thanks for the replies, I've got my 'broken' phone in its box on my wardrobe, Carphone Warehouse have ordered me a brand new G5 to replace mine, I should get that sometime next week, but I'm buying a HTC Wildfire S pretty soon anyway!
Thanks for your help, I'd rather keep my broken phone well, broke aha.
Have you tried flashing twrp recovery then using cf-autoroot?
As the subject says guys, I rooted my gf's x10i and installed cwm via Flash tool 2.9.1. Was about to unlock the bootloader to install a custom rom when (I swear this was the dumbest moment in my entire life) I clicked the "Optimize button" (FOR NO REASON) I'm on 2.3.3, it said "phone rebooting", my phone did nothing so I disregarded it. however, when I restarted it, the phone went to the sony erricson screen and just shutdown and restarted again and again and again. I booted into cwm recovery but to my horror it kept saying sd card in use when i try to intall a zip from sd (which I learned from this site means it's the wrong ver. cwm for my phone) So the gist is phone restarts every 10-15 seconds, I can't use cwm properly because of the version. and flashtool because it keeps resetting so quickly.
PLEASE PLEASE HELP!!!!
just simply reflash ? or use SEUS to flash stock software ?
i just read it again an saw the part where flashing wont work but i seem to be able to reflash before getting the SE logo ?
Bjornlindekens said:
just simply reflash ? or use SEUS to flash stock software ?
i just read it again an saw the part where flashing wont work but i seem to be able to reflash before getting the SE logo ?
Click to expand...
Click to collapse
Ok so walk me through this because I'm pretty new to it. When you say you reflash before you get to the SE logo. Does the phone have to be in fastboot? (hold back button?) because flashtool detects it and then it disconnects due to the restart. THANKS FOR THE REPLY!!
the way i do it is
1 select what im flashing (then it will tell you to turn off phone etc.etc.)
2 remove battery
3 unplug phone
4 reconnect phone
5 hold back button and keep holding it
6 slide battery in while still holding back button
about 5-10 sec later it should get detected :s
i really hope this helps because i dont think theres anything you can do if you cant even manage to flash the phone :s
ill look for simular problems and/or info :s
---------- Post added at 04:32 PM ---------- Previous post was at 04:29 PM ----------
this might be a stupid question but try recharging the phone a while if your not doing that already .
The charge light doesn't come on and yea with the 15 second restart, as soon as it is detected, like a few seconds later it restars and says disconnected. I looked all over and there is noone I find with a similar boot loop. I tried wiping my data via cwm recovery but same problem.
Ok so this might be a dumb ass thing to ask but I will ne way. If I can get a backup of someone else's x10 would I be able to apply it via cwm? Or will that fail like the zip install?
i've bin looking around aswell and couldnt find any simular problem
so the only thing i can suggest is not keeping this in the X10 Q&A but try the general aswell this might attract more people scouting trough.
but tbh im unable to see any options because as im reading i collected this info.
1) cant fastboot/flash anything (no option there)
2) cant use CWM recovery cause its the wrong version and reads the internal flash memory (called sdcard) but not your external microsd card (called external1???)
(correct me if im wrong on the second one)
if this is the case what else is there ?
Hi, sorry about your problem. I don't know a lot about this phone but ill give you the steps that got me going when I had a different issue.
This was in an email directly from Sony, hopefully it'll help, if not then at least I tried.
To Repair your phone Software, please follow the steps below:
Click on this link to download PC Companion http://www.sonymobile.com/us/tools/pc-companion/ .
Turn the phone off and disconnect it from the computer. Run the Software.
1. No matter what the program says do not connect the phone until you complete step 9.
2. In the welcome screen if asked click on Start, next you will be shown what Media Go offers, click on "next" then you will see a presentation on what Support Zone offers, click on "Finish".
3. In the next section from "Support Zone” and "Media Go" new select “Support Zone" and click on start.
4. On the next page select "Software Update" and click on "Start".
***At this point if you get an error stating that "unable to install update components" or "server is busy”, please proceed to step 12.
5. The program will say that there is no phone connected and will ask you to connect but disregard that and instead choose the option to "Repair Phone". (The program will issue you a warning on the content that you will lose during the update).
that any data saved only in your phone memory will be erased as part of the Phone Repair.
6. Choose Continue.
7. After that, the program will download the necessary information (several minutes) and it will present you with a list of phones.
8. Choose the X10 from the list (close to the bottom of the list) by clicking on the icon for the phone. Then click on "Next". Then you will see a new section telling you how to connect the phone. (Don't connect it yet!).
At this point the phone must be off and disconnected from the PC.
9. Connect the cable to the PC but not to the phone, then while pressing and holding the back key (the one on the lower right part of the screen that has the icon of an arrow pointing to the left on top) Connect the cable to the phone and keep holding the back key until the program says "The update of your phone has started..." (In some cases a message of "Installing drivers" will appear before the message of "The update of your phone has started..." is shown.).
10. If the steps were not followed exactly the phone will turn on and it will request that you "Proceed with the following steps, slide down the notification bar".
happens disconnect the phone from the cable, turn it off and repeat from step 9).
11. If PC Companion proceeds correctly with the update it will tell you to release the back key.
the update to finish and follow instructions on the screen.
12. If you receive the message: “Unable to install update components".
a. Close PC Companion.
b. Install Java from: http://www.java.com.
c. Start Pc companion again and try to do the software unlock process once more
As part of Sony Mobile's commitment to excellent customer service, we offer a wide variety of mobile products to suit your lifestyle. If you require more information, or have any other questions, please visit www.sonymobile.com or call us at 1-866-766-9374.
Hey guys thanks a bunch, I reflashed using flashtool. Apparently once the flashing takes, flash mode stays on (go fig right? lol) I really do wanna say thank you to you guys who helped me esp Bjornlindekens (I hit thanks don't worry )
Hooray happy i could help and glad for ya to getting it running again! !
Sent from my X10 using xda premium
Hello wise masters of the android :fingers-crossed:
Recently got my SG2 wich come with 4.0.3 ofc i'm stupid and flashed it with Odin to Stock 4.0.4 (LQ6) and now i want to root but i read on the forums that i might end up with a suoperbrick or something like that (already have a brick with a PSP label laying around my bedroom, 1 is enough )
If you could give me a Step by Step guide on how to root my S2 i would be forever grateful
Flash Odin version of Siyah kernel. Root + CWM. Done. As there are already numerous threads on how to root a phone/flash roms, I'm not about to regurgitate a step by step guide here for purely your convenience. Search.
Edit - Guides. I strongly suggest a lot of reading/researching before you do anything. We seem to have had more borked phones in here than normal lately, and almost every single person did so because they hadn't done their homework in the first instance. Many asked what you asked, got brief or incomplete instructions, made a whole bunch of assumptions because the instructions weren't quite there, or were in too much of a hurry and ended up in trouble.
If you do the reading/learning yourself, you understand the processes which makes you less likely to get into trouble in the first place, and even if you do, you can fix it easily yourself without having to wait anything up to a day or more to get answers here in order to recover your phone if it isn't completely borked. Believe me, doing your homework as opposed to being without your phone for a day or more if you stuff up is worth it.
Icefluffy said:
Hello wise masters of the android :fingers-crossed:
Recently got my SG2 wich come with 4.0.3 ofc i'm stupid and flashed it with Odin to Stock 4.0.4 (LQ6) and now i want to root but i read on the forums that i might end up with a suoperbrick or something like that (already have a brick with a PSP label laying around my bedroom, 1 is enough )
If you could give me a Step by Step guide on how to root my S2 i would be forever grateful
Click to expand...
Click to collapse
First Make Backup of all your contacts and messages in case anything unexpected occurs..
Make sure you have All Galaxy S2 USB drivers installed on your PC before following this and kies disable just in case..
Rooting Procedure:
Step one: First of all make sure that you have download and install all the needed software. Then, Put device in USB debugging mode: Settings ->Applications -> Development -> USB debugging.
Step Two: Reboot your device in the download session mode. To get enter in the download mode of Samsung Galaxy S2, switched off the device and turn it on again by holding Volumedown button + Home button and Power button simultaneously. You will surely reach to the download mode. You can get yourself confirm by identifying same as below mention picture as on your phone screen.
Step Three: Open the ODIN Downloader .
Step Four: Now, with the help of USB Cable connect the device to the computer while keeping the Odin open then wait for the few seconds then odin notified you that the device is connected to the computer(one of its boxes goes yellow). Select the checkboxes next to “Auto reboot” and “F. Reset Time” and kept default else options. After all this, press “PDA” Button and extract and select the CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5.tar file(download here) which you have downloaded on your pc. Now Press “Start” button, after this pressing the start button ODIN will flash the kernel and after flashing it phone will reboot. Becareful, don’t dare to disattach the device from computer while rebooting.
DONE..!!!!
Your Phone is Now Rooted...:good:
Idk about your kernel....whichever one it is just download its cf-root and flash that one..
Press Thanx if i helped..
Guide: http://forum.xda-developers.com/showthread.php?t=1826497
umair241995;36795050
Press Thanx if i helped..:)[/QUOTE said:
what you mean in the end with the kernel thing? after following your guide to root (thanks for that) do i have to do anything more?
Click to expand...
Click to collapse
Icefluffy said:
what you mean in the end with the kernel thing? after following your guide to root (thanks for that) do i have to do anything more?
Click to expand...
Click to collapse
If protection from emmc bug in stock 4.0.4 kernel is all you want then all you need to do is flash a custom kernel like Siyah and you're done.
Hello. I've tried using multiple ROMs in my rooted phone with KDZ Updater, and I guess that one of the updates hanged, or maybe it was something else... I really don't know. What I do know is that my phone currently isn't able to enter recovery mode, and is also not showing any boot logos (neither 'LG' nor 'Android').
I did see some threads about this, one of them talking about starting in Download Mode and using KDZ in CS_Emergency mode with some French ROM. Well, I tried that and as soon as I press "Launch software upgrade" the program freezes until I plug my phone off the PC.
I feel as if something was stuck in my throat and the only way to get it out is by completing this... so any help will be greatly appreciated!
PS: All this happened in the process of trying to install Cyanogen Mod 10.1 (which I did not try yet).
http://forum.xda-developers.com/showthread.php?t=1119531
Need to make sure to get the right firmware, DLL file, and make sure you have the right port set on the program.
es0tericcha0s said:
http://forum.xda-developers.com/showthread.php?t=1119531
Need to make sure to get the right firmware, DLL file, and make sure you have the right port set on the program.
Click to expand...
Click to collapse
Thanks for the reply!
I appreciate the info, and I'll be checking what you've said. All the links in that thread are inaccessible because Fileserve only lets you download what you upload. Anyway, I'm curious as to what this "DLL" file does on a smartphone... why do I need these things? I never heard of them being mentioned anywhere.
I'll start educating myself ASAP. Meanwhile, thank you very much (and by the way, if it's of help to anyone, my phone is a GT540g from Personal, Argentina.
You're welcome. Sorry, didn't check to see if the files were still there and most every other site just had reposts of the fileserve links. However, finally found what you need here:
http://files-gsm.ru/lg flesh/GT540gAT-00-V20a-722-34-DEC-28-2010+0.dz.zip
I found this dll for your phone but not sure if it works with the firmware you have for that version:
http://www.mediafire.com/download/9v9e78xronadm0c/GT540g_100506_MP.dll
"A dynamic-link library (DLL) file is an executable file that allows programs to share code and other resources necessary to perform particular tasks..."
Basically it ties together a few things in Windows to let the flash tool work for your specific device is my understanding. But they have to be specific to the phone or it won't run once it checks the build.prop of the phone vs the firmware you're trying to install.
Keep in mind, I do not have this phone and have no way to test if they will or won't work so just like any other mod or upgrade - you do so at your own risk.
Thanks, but...
First of all, I'm very sorry not to have replied before, but I've been busy. Anyway!
Thanks, I appreciate the links, but I don't understand where to put the .dll file in my phone. I know you'd think I'm an idiot who doesn't know how to use Google, but I actually did search beforehand. I simply don't get where to put it.
Also, if it's worth the shot, I just noticed that I should disable the "Modem" that activates when I plug my phone in. The problem is, KDZ just does this simple log [attached] and states "===FINISHED===" (Note that I have 2 Modems listed in my device manager [attached screenshot])
Solution GT540
Thanks for your help everyone, I came to a solution after a full year lol. Here's my enlightenment, from another Thread:
Just wanted to leave my 2 cents here, I've been trying to do my best since around august 2014, no success. 2 days ago I retried this, and I DID IT! I will tell everyone what I did very shortly:
My problem that I solved: I can boot, device works like a charm. But: no boot logos, no recovery.
My solution for TL;DR: UNINSTALL ALL DRIVERS FROM DEVICE MANAGER 1ST, then reinstall. After that, flash a fastboot ROM and use it to WIPE ALL THE DATA IN YOUR PHONE! THIS was what I needed and was never explained: you had to WIPE the old data in order to get the boot screens back.
IN THIS ORDER (THANK YOU to those people from previous replies, gathering all your info was of great value):
Uninstall all of your phone drivers from your PC!!! This is what made most of my headaches go away, just use Device Manager and uninstall anything from LGE. After that, plug in your device in your USB ports (always BACK ports, not front ports, important). It should detect all drivers and download them.
IF it fails (it generally does with LGE USB Modem), you can go to Device Manager > Unknown Device (the one that wasn't recognized) > Right Click and Update > Choose 2nd option, then choose "choose from a list of local controllers" (or whatever the button says). After that, scroll down to LG Electronics, Inc. and install what didn't install.
I also found these drivers, but I did not test them: http://www.mediafire.com/download/p693hcz6kkouh19/USB_Driver_LG_GT540.zip
Huzzah!
Now you're set to begin:
FIRST thing you wanna do is a factory reset, this is something I'd forgotten with time, don't make the same mistake as I did. You can do it by turning your phone on and pressing Volume +/- & Home & Quick Search buttons all together for 5 seconds (it works, be patient and wait for it, even if you open the camera or any other stuff).
Download this Google SDK Tools (unzip and put the folder in C:\ drive) and this Fastboot drivers for GT540 (unzip and put the files inside the folder in C:\android-sdk).
Skip this next line if you know your ROM has fastboot.
Now, if you don't have a ROM with fastboot, I recommend you use either European Open+Fastboot or V20C Orange France Fastboot ROM.
Click to expand...
Click to collapse
Since you have Fastboot enabled, now all you need to do is turn off your device (all this with its battery on it, no weird things) and hold the Camera button before turning it back on. This should take you either to a black screen, or simply to no display, like me. Either one will work anyways.
Now press the Windows key > Type cmd and open it with Right Click > Run as Administrator.
In it, type all this, command by command (you can paste by right clicking):
cd C:\android-sdk
fastboot -w
fastboot erase boot
fastboot erase system
fastboot -w
fastboot reboot
Click to expand...
Click to collapse
And now it's go time! Do what everyone else says in here: Take out your phone's battery, SD and SIM cards, fire KDZ Updater up as Administrator (If your KDZ freezes, then it's either faulty or you did not install msxml, look for a good KDZ that comes with that file and delete your current one), choose CS_Emergency PhoneMode and:
1-Plug your phone while holding the volume DOWN button (don't worry! My phone didn't show "Download Mode" either, if you hear the Windows "Somethingpluggedin" Bump noise, it's ok).
2-Flash French V20A
3-Unplug your phone once KDZ says "==FINISHED==".
4-Plug it once again, holding the volume DOWN button.
5-Flash out.kdz (remember! it's CS_Emergency).
Click to expand...
Click to collapse
THANK YOU XDA!