When the "official" ICS for the galaxy tab was released, I was pleased to know that now I would have the cameras working again, I use my tablet for skype, so that where good news. But immediately after installing the official release, I started to miss CyanogenMod. Can you tell me if someone is working in CM9 with working cameras.
List of things so far:
-No Power Button Menu (when I press the power button the tab immediately turns off)
-No 3G
-No system tray auto hide options
-No Lockscreen
-Settings menu oversimplified
Any help solving any this problems would help a lot.
Forget the release date please help me with the following:
-Power Button Menu (Recover, Reboot, Profile, etc)
-System tray auto hide
-Lockscreen
Please!!!
I'm not sure what you mean by power button and lockscreen. Power button has airplane mode and reboot enabled in official ics. And lockscreen works also.
Sent from my amazing 10.1 galaxy tab
All I can say is check the threads for the SGT they are always busy trying to fix things also you can always go to there website. If all fails and and you really need the camera I suggest don't flash anything until its fixed cause flashing a rom knowing that the camera does not work then asking for a fix will only irritate the devs...
Sent from my GT-P7510 using xda premium
I think that the release is near now that Samsung has released de source code, pershoot is working in get a CM9 fully working, and the base CM9 is already stable. I hope to see a CM9 stable in the next weeks (maybe days? :fingers-crossed: )
Looking forward to a stable CM9 release on our Tabs. I'm not that big a fan of the stock TouchWiz ICS, but since it has a working camera, it'll do for now.
Well now that the real ics stock rom is out I'm sure they can move toward...
Sent from my GT-7510 Stock ICS ROM 4.0.4 using XDA Premium
CM9 camera not working
Since im a noob on XDA I'll take the punishment for the next question
every one is going back and forth on the camera not working on galaxy tab 10.1 with CM9
is there now n actual rom (jellybean or else) for tab 10.1, or update for CM9 where the camera works
also, is there a web site that i can go to that gives proper step by step instructions for installing and rooting the tablet
i used a pcmag link previously to install CM9 - works well exept for the camera
[email protected] said:
Since im a noob on XDA I'll take the punishment for the next question
every one is going back and forth on the camera not working on galaxy tab 10.1 with CM9
is there now n actual rom (jellybean or else) for tab 10.1, or update for CM9 where the camera works
also, is there a web site that i can go to that gives proper step by step instructions for installing and rooting the tablet
i used a pcmag link previously to install CM9 - works well exept for the camera
Click to expand...
Click to collapse
The only rom that work cameras is the touchwiz ics from samsung..
http://forum.xda-developers.com/showthread.php?t=1870561
I found this threat today, but didn't solve any of the problems, can someone try it and say if this works.
Original poster: There is definitley something wrong with your tab. If you have flashed the correct CM build for your tab all those things should be working. If I were you I would flash to stock ICS with Odin using the correct firmware for your region from www.sammobile.com This will put you on the ICS bootloader, it will also wipe your sd partition but its the best way to start fresh. Then flash the appropriate CM build for your model from pershoots blog http://droidbasement.com/galaxy/roms/cm9/ the one dated 09/01 is the most recent and is built from the 3.1 kernel source so both cameras are working. Be sure to use the supplied CWM recovery and perform all necessary wipes i.e Cache, dalvnik cache, factory reset.
To all others: Pershoot is working on getting CM9 to RC status before work begins on CM10. He does great work so be patient.
Related
Hi guys,
I have been using in a more or less satisfying way the mentioned ROM, [wrong]KI5[/wrong] AHEM, KI3, under the darkyrom modification. I didn't quite like the glowy stuff, but anyway. I would like to have an upgrade, since I've read there are way newer versions already (gosh this moves fast!). So far I'm rather satisfied, but the contacts bother me a lot. I get a lot of FC whenever I try to modify anything within the contacts. So I want to change the ROM and (hopefully) get rid of the issue. I am currently doing a Titanium backup and CWM backup. So my questions go as follows:
1: If I chose Cyanogenmod, would I have any problem? I mean, I have root from CF-root if I'm not mistaken, and then now running darky rom. Is there any step I should follow, or can I just do an update.zip?
2: If I chose any other ROM (preferably the less customized possible, I basically go with GO Launcher and that's it), which one is the most recommended/stable etc? I prefer if it looks more android stock than touchwiz anyway.
PS: Does MHL work already on cyanogenmod?
timonoj said:
1: If I chose Cyanogenmod, would I have any problem? I mean, I have root from CF-root if I'm not mistaken, and then now running darky rom. Is there any step I should follow, or can I just do an update.zip?
2: If I chose any other ROM (preferably the less customized possible, I basically go with GO Launcher and that's it), which one is the most recommended/stable etc? I prefer if it looks more android stock than touchwiz anyway.
PS: Does MHL work already on cyanogenmod?
Click to expand...
Click to collapse
All the information you need and more is available in the CyanogenMod 7 (w/ Gingerbread 2.3.7) for Galaxy SII Q&A thread, just follow the instructions in the first post carefully.
All the stock ROMs are in the [ROM+Guide]Official i9100 Firmwares KG, KH1/2/3/4, KI1/2/3/4/8, KJ1/2 Download thread. If you don't want a stock ROM, browse through the rest of the ones on offer.
atinm said:
Q: What are the known issues?
A: Issues that I can remember:
- Video playback - some formats are not recognized, use an alternative app for video playback
- Camera - some modes don't work
- TVout, MHL
- FMRadio
- Issues when using the 2G/3G-Switch
- Volume issues (some report too high, others too low)
Click to expand...
Click to collapse
Thank you for the listing, I already saw it. It's fully stock, so I wasn't interested.
I also wanted an update on the situation of cyanogenmod which actually you gave me, so thank you.
But I also wanted recommendations of people, to see what ROMs they consider stable.
I would like to be able to modify both the icons and the off-screen animation so it looks like stock android (not touchwiz). Everything else I would like to keep it...So what would you recommend me?
So many ways to go...
Cm7 nightly looks good. Still waiting for release so if FCs are a problem you might not like it. I only got a few anyway but still.
Stock samsung is still best for me. Add jkay mods for sure will give you great themes and New lock screens and nice system features like CRT.
Go launcher ex
Go sms pro
Go contacts ex
All good and themed.
Good luck.
Sent from my GT-I9100 using XDA App
Hello
I installed the KANG ROM found in the following thread [ROM][KANG]CM9 ICS 10.1 WiFi Preview 02/08/12 and the boot screen seems to refresh/scroll endlessly. Once the lock screen comes up (which scrolls endlessly as well), if I press the power button to turn screen off and then switch it back on, the display is stable.
I use the Korean Version SHW-M380W (Galaxy Tabl 10.1 Wifi 32GB). I tried Galaxy Task Slim 13.1 and other ICS Roms found on XDA, but the result is same.
Can someone please let me know a fix for this?
Thank you so much.
Ping
Ping...
Doesn't anyone else face this issue?
I don't think it supports the korean tab
Hmm I saw that if I restore /boot from stock image backup in HC 3.2 this issue was solved. Tried and tested it and worked fine. But when I upgrade to ICS, there is no /boot to restore from. Just tried it with the Hc 3.2 /boot and the system hanged.
Probably different ramdisks as ics kang is based of devices they own and custom via the model as the Korean tab is not part of it you may need to request or hope someone donates one to them, and if it was the official update of ics it would work but these are custom made builds based off the source ics package given by Google so it isn't an official update like HC3. 2
Sent from my GT-P7500 using Tapatalk
Thanks
Thank you for your reply.
have you tried romans?
Romans
You mean the AOKP one right? Yeah, I have tried it, but the same issue
I mean, the one from here: http://forum.aokp.co/page/releases
Build 28 to be specific. Strangely, the same (screen jumping) issue was there with CWM as well. And pershoot was kind enough to make a new CWM just for Korean tab. I wonder what changed though (Am quite a newbie to rooting and stuff, so dont really know where to go to)
The pershoots CWM which fixed a screen jumping issue for CWM (not for boot screen though) is found here: http://forum.xda-developers.com/showthread.php?t=1360588
Thanks bro.
So its all fixed?
Oops, I missed the whole point Actually, I had tried that after the [ROM][KANG]CM9 ICS 10.1 WiFi Preview 02/08/12 version, but the issue persisted. Its only with the bootscreen that this issue exists. Once we go to the lock screen, the issues still exists, but a screen off -> screen on (using the power key) quickly restores the screen back to the non-fluctuating version.
Wait, why havent you used kang by Roman? Its already coming to 4.0.4
Build 29
Thanks Misledz: I tried out Build 29 located in the following page:
http://forum.aokp.co/page/releases
Still the problem persists
I think you need a clean wipe, like generally wipe everything off it, a factory reset and stock firmware flash, then see if it persists.
Only this solution worked for me on EU version:
http://forum.xda-developers.com/showthread.php?t=1555984
Tried that but still no luck
snpetit said:
Only this solution worked for me on EU version:
http://forum.xda-developers.com/showthread.php?t=1555984
Click to expand...
Click to collapse
I guess I have the same recovery. The issue is not with the scrolling recovery, but with the scrolling lock screen. Did it get fixed for you as well? Am using AOKP build 30.
Thank You!!!!
snpetit said:
Only this solution worked for me on EU version:
http://forum.xda-developers.com/showthread.php?t=1555984
Click to expand...
Click to collapse
Thank you so very much!! The issue which was bothering me for the last three months is now solved. Life saver..
Hello everyone
I'm thinking to install a custom ROM to my P7500 3g but still not sure which one. I specially want to play my 720p brrip movies on my tablet. Any good roms to recommend? btw i used overcome rom like last year,the first release i think. it was good but couldnt follow the hack scene since.
If you have no special needs not covered by stock rom i would advice to stay on stock rom.
GV
Well the stock rom starts on lagging on me lately and uses too much of the ram.Plus since I havent heard of jelly bean coming to the tab 10.1, i wanted to try the custom roms.do you recommend the cm 10.1 or the overcome rom?
I have no personal experience with other Roms on my P7500 but i have tried cm10 on my other Android devices. From what i read on the xda forum i am not at all sure that another rom (ICS or JB) will improve my Tab rsponsiveness. My Tab runs currently extra smoothly with stock 3,2 HC rom, rooted and overclocked with setcpu app using Pershoot's kernel (thanks)
GV
Be very careful .. I bricked my first tab by simply putting an american rom on it by accident. When I went to factory reset from the recovery it triggered DSOD and locked the device.. A very rapid learning curve indeed!!
aaanyway....
Been on CM10.1 for a week now on my GT-P7500.. fast , buttery smooth and a pain free install....make a nandroid backup from recovery first !! do a wipe and factory reset afterwards. I love the look and feel of it now... mmmm shiny
Thanks for the reply caramel.Ok i'll install the CM 10.1 too I'm using 4.0.4 now.In Galaxy s2 the 4.0.4 has a wipe data bug, bricks the device.Does the tab has that too?
burning_afd said:
Thanks for the reply caramel.Ok i'll install the CM 10.1 too I'm using 4.0.4 now.In Galaxy s2 the 4.0.4 has a wipe data bug, bricks the device.Does the tab has that too?
Click to expand...
Click to collapse
IF you've flashed a custom recovery, there's no worry with the emmc bug.
Hello everyone, I have a Pantech Burst 9070 with Ice Cream 4 am root and I have installed the clockwork recovery, and I made a backup with ROM Manager.
Now I need to get a set JellyBeans ROM on my cell. If anyone knows of any ROM stable and reliable, please share the link to download and install.
Also I have two questions:
1. If I install JB, I will miss the release of the sim?
2. If you do not like JB, I can go back to the recovery of IC I made with ROM Manager?
Thank you! for their help
Here you can restore this in CWM:http://www.4shared.com/get/ugTBX-X7/android_42_update_for_ATT_Pant.html
It is a back up, so restore in CWM
OFFICEal POST: http://forum.xda-developers.com/showthread.php?p=36443320
Hey guys i have managed to make a rom of android 4.2 for the pantech burst but its not fully android 4.2 jellybean read full description carefully..
100% Tested and working.
Improvements:
Increased Battery Life.
Zoomable Screen.
3d Menu.
4.2 camera (Photosphere not working yet)
Working:
wifi,bluetooth,and all the system apps are working vey well.
Not working:
Photosphere, Android 4.2 Lockscreen And google Now.
These things will be fixed when i will give the next updated!!
Hey guys,
i have posted a link for downloading the jellybean android 4.2.1 rom for the pantech burst.
PLEASE READ CAEFULLY:
extract and copy all the files to your phones sd card.
go to cwm recovery and choose backup and restore
choose restore
select this file
flash then reboot its done.
PLEASE DONATE HERE:[email protected]
after installing every application you need to restart the launcher you can force close it this will be fixed soon.
I have tested this rom before posting the link.
i am not a developer but i like doing these things as a passion. recently my brother had came for a stay to our house and he had brought this one of the best devices.
he had came just for 6 days and in 6 days we had rooted this phone and installed android 4.0 and were even able to make android 4.2 or this phone.this rom isnt fully android 4.2 jellybean you can say that it is mixed functions of kagedmod and android 4.2 jellybean but its still jellybean.
the photosphere is not working soon i will post an update with the photosphere working and as he was only for 6 days i was not able to make the android 4.2 lockscreen so the default lockscreens are present but still i was able to make a home screen like nexus 4 (Fully Zoomable) and 3d. i have made a lockscreen which has similar features as the lockscreen of android 4.2 but its not exactly as same as android 4.2 this is a different 3d version maybe you people like this.
I am currently 14 years old i love making these these things for android as a passion so i do but still i cant do this perfectly as i myself do not have a phone and use my relatives phone who agree and want to root ie install custom roms in their phones.
I too want to have a high end phone like you guys but my father is not able to buy me one but it would be greatful if i can recieve some donations. kindly donate if you like this rom.i always had a dream of buying a high end smartphone but my father cant buy me one. Donations from you guys can help me a lot.
PLEASE DONATE HERE:[email protected]
i will give the update of this rom as soon as i make one.
Guess have to wait for my brother to come again
SOME SCREENSHOTS ARE ATTACHED KINDLY CHECK.THE WIDGETS APPEAR SMALL DUE TO ZOOMABLE HOMESCREEN YOU CAN ZOOM IN AND ZOOOM OUT TO MANAGE THE SIZES.
as currently i cannot post links on xda as i havent posted 0 posts yet so the link for the dwonload is in the barcode...
Apparently this ROM is defective, I'll wait, maybe there is another developer who can improve
Found it: last three links:
http://www.devsnest.com/phpbb/viewtopic.php?f=12&t=10
Ok. I'll check it. Thanks
Enviado desde mi PantechP9070 usando Tapatalk 2
error
i have install 4.1 cyanogen but when recive calls it has error like : unfortunaty the proccess.phone.com has stop working & i lost calls. my network lost for 5-6 min then i can get phone call log. i try to restore 4.2 update but it shows only md5 error. pls help me
I using
pa_presto-2.57.6-20130502-022111-Utacka
This ROM is cool
Enviado desde mi PantechP9070 usando Tapatalk 2
Hi guys! I'm new to all of this.
I rooted my Galaxy S2 on a whim with the dorimax kernel.
Now I have the following trouble: There is a noticable lag between pressing the home button and closing the app/returning to the home screen.
This effect started happening after I installed the offical JB update from my provider the dorimanx kernel made it a lot more noticable(ICS was way faster in that regard... which puzzles me quite a bit)
What do I have to do to reduce this problem? Change something in the settings or install a non-stock ROM?
----------
Also three other questions out of curiousity:
Can I use the dorimax kernel with the neatrom?(as the need rom comes with another kernel, I would have to flash the dorimanx kernel on top of it after installing everything?)
If I made a nandroid backup before installing Neatrom: would I be able to return everything to how it was(stock SAMSUNG Rom with dorimanx kernel;by simply selecting my backup under the restore option in CWM) before installing neatrom in case I dont like it?
What is better: The CM that is based on JB 4.1 or NeatRom? Is the CM version based on 4.2 usable, or do they still have some annoying problems? <----I guess there is still no stable build for 4.2 under CM?
Thank you very much guys.
If I get positiv comments I'm gonna flash neatrom first thing tomorrow morning. I allready have nandroid backup and saved a lot of my favorite apps with TB.
Another QuestioN: Would I be able to install the Samsung Stock email app from a TB-Save on another rom?<-- I know that you shouldn't do this with system apps(I dont want to reenter the server adresses for my email account in an other app)
Heraku said:
Hi guys! I'm new to all of this.
I rooted my Galaxy S2 on a whim with the dorimax kernel.
Now I have the following trouble: There is a noticable lag between pressing the home button and closing the app/returning to the home screen.
This effect started happening after I installed the offical JB update from my provider the dorimanx kernel made it a lot more noticable(ICS was way faster in that regard... which puzzles me quite a bit)
What do I have to do to reduce this problem? Change something in the settings or install a non-stock ROM?
----------
Also three other questions out of curiousity:
Can I use the dorimax kernel with the neatrom?(as the need rom comes with another kernel, I would have to flash the dorimanx kernel on top of it after installing everything?)
If I made a nandroid backup before installing Neatrom: would I be able to return everything to how it was(stock SAMSUNG Rom with dorimanx kernel;by simply selecting my backup under the restore option in CWM) before installing neatrom in case I dont like it?
What is better: The CM that is based on JB 4.1 or NeatRom? Is the CM version based on 4.2 usable, or do they still have some annoying problems? <----I guess there is still no stable build for 4.2 under CM?
Thank you very much guys.
If I get positiv comments I'm gonna flash neatrom first thing tomorrow morning. I allready have nandroid backup and saved a lot of my favorite apps with TB.
Another QuestioN: Would I be able to install the Samsung Stock email app from a TB-Save on another rom?<-- I know that you shouldn't do this with system apps(I dont want to reenter the server adresses for my email account in an other app)
Click to expand...
Click to collapse
I'm Sure someone else will know different but for me the lag was always there and I never heard of a way to reduce it, I've been using an s3 mini today running 4.1 and there is considerable lag between pressing the button and returning to the home screen so it could be a fault in Samsung JB rom's. Try neatrom, as I understand it's blazingly fast and a considerable improvement over stock.
I've been running cm10.1 for a while and it still has some big bugs (hardware composer etc) that will probably never be sorted due to Samsung's unwillingness to release their sources, and the FM radio does not work. However everything I use works the odd game doesn't (real racing 3) due to I believe the Mali drivers but other than that everything else is running ok. Recent updates have made it very fast and for me it's faster than any "stock" based rom.
Yes you can use dori kernel with neatrom and cm10.1 as well, although you will need the 9.xx kernel.
You can use the stock email app on neatrom and any other stock based rom but not on Cyanogenmmod or any other AOSP based rom.
Yea backup in CWM and you can restore it if you don't like Neatrom.
Hope some of this helps