Hi,
is there a way of making the jetstream play nice with NTFS sd cards?
I think ntfs mount app does the trick. Haven't tried a ad card but all pen drives and hard disks work perfectly. Available from app store.
Sent from my HTC PG09410 using xda app-developers app
thanks!
Paragon NTFS&HFS+ works good for me
i seem to be doing something wrong.
i've formatted the SD card to NTFS format, but i think the devices doesnt recognize it.
i can write to sd card using astro, and i can't see the files that i copied off the computer. (the same files from be4 the format)
i insert the SD card, and then run paragon. there i choose "mount". this brings me to a second menu, in which i can chose manual or automatic mount. no matter what i chose, it sends me back to the first menu.
tried another app ntfsd, but it doesnt seem to do the trick.
ideas?
guru_shastri said:
i seem to be doing something wrong.
i've formatted the SD card to NTFS format, but i think the devices doesnt recognize it.
i can write to sd card using astro, and i can't see the files that i copied off the computer. (the same files from be4 the format)
i insert the SD card, and then run paragon. there i choose "mount". this brings me to a second menu, in which i can chose manual or automatic mount. no matter what i chose, it sends me back to the first menu.
tried another app ntfsd, but it doesnt seem to do the trick.
ideas?
Click to expand...
Click to collapse
Will try and tell you. I think the latest version of ntfs may have some problem. Will try, confirm in a bit.
Sent from my HTC PG09410 using xda app-developers app
guru_shastri said:
i seem to be doing something wrong.
i've formatted the SD card to NTFS format, but i think the devices doesnt recognize it.
i can write to sd card using astro, and i can't see the files that i copied off the computer. (the same files from be4 the format)
i insert the SD card, and then run paragon. there i choose "mount". this brings me to a second menu, in which i can chose manual or automatic mount. no matter what i chose, it sends me back to the first menu.
tried another app ntfsd, but it doesnt seem to do the trick.
ideas?
Click to expand...
Click to collapse
I checked it out. Wasn't able to mount a SD Card in NTFS file system format using NTFS Mount. Sorry about that. It works perfectly well for external storage (hard disk and pen drive). In any case, I tried NtfsSd as well - didn't work. BanBoo mentioned Paragon NTFS&HFS+. I tried it and like you, had the same problem where I couldn't get it to mount. I did however, go to the tools/setting menu and ask to fix permissions/check the sd card. It did some changes and after that, I was able to mount it. I was asked manual/automatic. Automatic did me no good but manual let me chose a directory (i chose /mnt/sdcard/ntfscard/) and it mounted. As a test, I had loaded some HD movies (8Gb & 4.3Gb) and some documents on it. I was able to access them and also make changes to the card. I guess the fixing/checking of the card prior to mount makes the difference.
Thanks BanBoo. Can now play HD movies (larger than 4GB) from SD card rather than having to mount and use my external hard disk.
Yep. Paragon or NtfsSd, both are working fine in my case.
works now! thanks kailashpchhabria
Related
So I recently Romed my Viewsonic G Tablet.
I followed this guide.
http://forum.xda-developers.com/showthread.php?t=865245
Everything is fine..except when I put a SD card into the SD slot the Tablet doesn't recognize it. It just tells the the internal Space not the SD card space.
I used ZPad Clean v3.0 for the ROM and I used cwmod_internal.zip instead of cwmod_microsd.zip
I then used my friend's G Tablet and put the SD card in it..It read it just fine.
So I wanted to test it out while it was rooted. (to double check)
I then Rooted my friends GTablet also. I rooted it the same way but the only change I did was have a SD card in the tablet the whole time. Still the same problem.
Is there any way to fix it? DO i need to use cwmod_microsd.zip....instead of cwmod_internal.zip??
I'm really confused if someone can help me that would be amazing!
Is there an APP that tells you the storage of your installed SD Cards?
Thank you
You mean flashed the rom when you say romed. Have you checked to make sure the sdcard is getting mounted? If there is no data on it you might try reformatting it in either of the g tabs. If you can get to a shell you might reboot, and look at the last 20 lines or so of dmesg. Insert the card and take another look at dmesg and see if the kernel is picking up the insert at all. If so it is likely just a mounting issue.
muqali said:
You mean flashed the rom when you say romed. Have you checked to make sure the sdcard is getting mounted? If there is no data on it you might try reformatting it in either of the g tabs. If you can get to a shell you might reboot, and look at the last 20 lines or so of dmesg. Insert the card and take another look at dmesg and see if the kernel is picking up the insert at all. If so it is likely just a mounting issue.
Click to expand...
Click to collapse
Well I reformatted it and I mounted it. Still nothing..How can I check if the kernel is picking up the SD card at all?
Would changing Kernel's fix the problem? I'm just using the Stock Kernel that the ROM came with.
Thanks
You were able to reformat and mount it via the g tablet with the zpad software on it? And even having done that it doesn't list it as having any free space?
muqali said:
You were able to reformat and mount it via the g tablet with the zpad software on it? And even having done that it doesn't list it as having any free space?
Click to expand...
Click to collapse
Not yet. So should I go to Storage and devices and unmount and format the SD card via the tab?
Try it on the tablet.
If I reformat the SD card wouldn't I loose the root? or no right because I did external
My understanding of root is that it modifies files on your tab/phone, not an external sd card. Worst case you lose root and reroot the device.
muqali said:
Try it on the tablet.
Click to expand...
Click to collapse
steveojp said:
Not yet. So should I go to Storage and devices and unmount and format the SD card via the tab?
Click to expand...
Click to collapse
When I tap click mount it says 11.3 gigs available.
when i unmount it says unavailable.
The card is only 8GB.
It should be internal storage 16GB.
SD card like 8gb.
Not sure what's going on.
If I format I think I'll wipe it all.
Ok, there is an internal 16GB, yes. Of which you have 11GB free. The SD card you're having the issue with is a separate uSD 8GB, right?
I'm meaning for you to try to mount/unmount or possibly format the 8GB SD card. If it isn't showing at all then the issue is something beyond it simply not being mounted.
muqali said:
Ok, there is an internal 16GB, yes. Of which you have 11GB free. The SD card you're having the issue with is a separate uSD 8GB, right?
I'm meaning for you to try to mount/unmount or possibly format the 8GB SD card. If it isn't showing at all then the issue is something beyond it simply not being mounted.
Click to expand...
Click to collapse
Yeah. It's a separate card that I plugged into it.
Was there ever a fix/resolution for this? I am having the same issue.
Everyone,
I've written this a bunch of times -- but here's one more:
/sdcard -- internal memory of the tablet
/sdcard2 -- miniSD card in the external slot
/usbdisk -- USB key slot
Put your recovery folder and update.zip on /sdcard, turn off the tablet, the press power
and volume + to initiate standard recovery.
Second, put your recovery folder and update.zip on a miniSD card. Edit the command file
in the recovery folder with Notepad to change the location from /sdcard to /sdcard2 and
save it with the name "command" (NO .txt or other file extension). Then boot
recovery with power/volume + and the OS will use the sdcard (assuming you don't
have a live recovery/update.zip file in /sdcard).
Third, if you can boot recovery to CWM but can get your ROM to work, go in recovery to
the mount menu and go down to the mount USB memory option and choose it.
Then plug your connector cable from the miniSB port to your PC. When you plug into
your PC an Explorer window should open and you should have a drive letter representing
the G-Tablet (it's G: on mine) on you menu. You now can select that
letter and you have access to your tablet memory (/sdcard). I've even had a time or two
when not a single file showed!!! I added update.zip and recovery and loaded
a ROM!
The tablet boot process apparently checks /SDCARD. If it doesn't find a recovery files there
it does the same check if you have a miniSD external card installed. The large USB slot is not
useable for booting or recovery so far as I have determined or read.
I hope this helps you.
Rev
I own a visio tablet which I rooted with vegan and clockwork. I have a 32GB SD card but when I check the storage is says 12GB on SD and 2GB on internal. The tablet should have 16GB + my 32GB. Anyone have an idea why it wont come up?
Is the fix above the best way to take care of this issue?
Can anyone kindly help? I've read through a lot of the links and can't find anything. I have rooted my device with clockworm v8, Vegan, got the market place to work and now I just need to figure out what is going on with my 32GB SD card. Should I format it with FAT32? How can I get it to be recognized?
Thanks in advance!
Formatting to Fat32 would be a good start ;-)
SD Card Dilemma
I have the VEGAn-TAB-v1.0.0B5.1 installed in my G-Tab and, with the exception of the SD card issue, things are just peachy! I've read the entire thread but, even with butchconners description, I seem to still be missing something. Let me try to structure this a bit differently...
1. The sdcard2 DOES show up in ifilemanager (with only one file, LOST.DIR) but NOT in SETTINGS. Since it does not appear in SETTINGS, there is no way to mount or dismount it (although if it shows up in the file manager and I can see the file on it, one might infer that it is already mounted.)
2. Even though I can see it in ifilemanager, I'm not so sure how I can actually USE it. It seems to me that the system would need to know (via SETTINGS) that it is there and I would have to tell the system where to put my files (i.e., sdcard or sdcard2).
3. When I connect my G-Tab to my Win7 PC, I only have access to sdcard AND NOT sdcard2. This seems a bit unusual since I have always had access to the removable sd card AND NOT the system memory on all my other devices (EVO, Blackberry, etc.)
My goal is to be able to set applications (some or all) to use the sdcard2 (at least for data) and be able to access it via the usb connection to my PC. Does anyone know how to accomplish this?...Has a solution for this already been posted somewhere?
Many thanks.
I am not an expert but the pc sees(?) only sdcard(internal) but no sdcard2(microsd).
Right, Guys?
I am now able to see both sdcard1 and sdcard2 using pershoots latest oc kernal released 4/25 when hooking up gtab via usb to computer. I am using Vegan tab gingeredition.
where does one find that kernel and how do i install it? Im running vegan ginger right nowand have the same sd card issue.
thanks!
Hey!
Again sorry for the possibly Noob question...I searched and didn't find anything.
How do I access my microsd card when it is installed in the GTab and the GTab is connected to my Windows 7 laptop?
This is driving my sort of crazy...there has to be a better way than swapping from the GTab to a card reader!
Thanks in advance!
Pat
As far as I know your computer only sees the internal Sdcard. I'm running VEGAn, not sure if it does it that way on other Roms.
I use ES File Explorer or Astro to move files from sdcard to sdcard2.
Get a microSD to SD adapter and physically plug it in...you can also get some "empty" USB sticks that will take a microSD card for the memory...
I just carry one around in my laptop bag and when I need to transfer files (music, video) to the external card, I pop it out of the tablet and into the converter...
How do I transfer playlists to the microSD card from my computer using Winamp?
Yep, unfortunately the only way to access the physical micro SD card is to remove it and use some sort of separate card reader (I'm using my DSLR camera!).
I also read somewhere that you have to shut down the tablet before removing the SD card and replace it before booting up again. Otherwise there may be issues (which I had) with the tablet recognizing the card. Not sure how broadly this issue applies but as rebooting is so quick I just do it to be safe.
Is there a way to mount sdcard2 to sdcard (like Galaxy Tab does?)
I used Multi Mount SD Card Lite (in market) to mount sdcard2 when usb is connected. It worked very well on TNT lite, however I haven't yet used it on Vegan, but I imagine it will work as well.
The app requires root access, and uses a widget to enable/disable mounting. It claims to be able to mount both sdcard and sdcard2 simultaneously, however I have yet to see that work.
Can't post a link, but simply search "Multi Mount SD-Card" in market.
Problem is that the Micro SD card is very hard to get in and out. You almost need a special tool to push down on the edge of the card to activate the spring release. Possibly a plastic stylus from an old PDA could be the "tool" to pop the Micro SD card out. - Craig
couchmonkey said:
How do I transfer playlists to the microSD card from my computer using Winamp?
Click to expand...
Click to collapse
That's really a Winamp question, and may depend on your computer.
It's certainly not a g-Tablet question.
brettdwagner said:
I used Multi Mount SD Card Lite (in market) to mount sdcard2 when usb is connected. It worked very well on TNT lite, however I haven't yet used it on Vegan, but I imagine it will work as well.
The app requires root access, and uses a widget to enable/disable mounting. It claims to be able to mount both sdcard and sdcard2 simultaneously, however I have yet to see that work.
Can't post a link, but simply search "Multi Mount SD-Card" in market.
Click to expand...
Click to collapse
agreed. I found this out too the hard way, but works great on vegan! I hit a widget and my sdcard mounts perfectly.
The Multi Mount SD Card Lite works great. Just using the free version and it works exactly how we would want it. Just remember to use the widget instead of the Android USB connection.
Thanks for the heads up on this app!
my gtablet recognizes the folder sdcard as a folder in the internal memory and the microsd as sdcard2 for some reason. when i plug it into my computer, i cant access the actual sdcard2 folder, so i cant access the micro sd. anyone have any experience with this? or any fixes?
thanks a lot. im running tntlite 4.4.0 on it.
That is how it is supposed to be on most ROMs...not just TnT
Pull out the microSD card, plug it into an adapter and plug the adapter into your computer. Then you will be able to read and transfer files!
Or just copy whatever you need to the SDCARD and use a File Manager to transfer them to SDCARD2 once you are on the tablet...
Right now, there is no way to mount both SDCARD and SDCARD2 at the same time to your computer via the tablet
Actualy there are a few apps on Market that do exactly that; some are add supported so you can try for free. Search for SDCard Mount or MutiMount.
I use the add supported Multi Mount SD-Card. Works fine.
SDcard2 dead!
pearlyking said:
Actualy there are a few apps on Market that do exactly that; some are add supported so you can try for free. Search for SDCard Mount or MutiMount.
I use the add supported Multi Mount SD-Card. Works fine.
Click to expand...
Click to collapse
I'd be careful using these. I got one out of the market that allowed you to access the external sd card. Everything went fine. I copied some of my music to the card and then disconnected from the pc. When I went to look at the sdcard2 folder via RootExplorer, I found that 2.39 GB of my 32GB card was used but could not access anything on the card. Now, my g-tab refuses to even see that I have an external card installed and I can't even get the format option in settings to attempt to rescue the card.
IndyLateNite said:
I'd be careful using these. I got one out of the market that allowed you to access the external sd card. Everything went fine. I copied some of my music to the card and then disconnected from the pc. When I went to look at the sdcard2 folder via RootExplorer, I found that 2.39 GB of my 32GB card was used but could not access anything on the card. Now, my g-tab refuses to even see that I have an external card installed and I can't even get the format option in settings to attempt to rescue the card.
Click to expand...
Click to collapse
eek that sucks. which one did you use?
get ESfile explorer. you can move stuff back and forth between sdcards or a server location. you can also copy from lan location to sdcard2
is that on the market or somewhere else?
it also is installing all of my games and stuff to the tablet internal memory. liek the dungeon defenders stuff.. all of it is downloaded onto the tablet sdcard folder, not onto the sdcard (sdcard2). anyone have any workaround for that?
joshtb86 said:
eek that sucks. which one did you use?
Click to expand...
Click to collapse
I'll respond and say it was Multi Mount SD-Card. That's the one I tried, with the same results. I can not get the GTab to read an external card at all. Can see card fine on PC though. I would surely stay away from that one.
I use file explorer to move to the SD Card. THis is a pita and a waste of time. The fastest thing to do is to put it in an SDCARD reader and place it in the PC.
This would be a nice fix and an app worth a buck or two.
WonkyMcSwifty said:
I'll respond and say it was Multi Mount SD-Card. That's the one I tried, with the same results. I can not get the GTab to read an external card at all. Can see card fine on PC though. I would surely stay away from that one.
Click to expand...
Click to collapse
thanks a lot!
Happy Sunday!
I put a 16g micro sd in the card slot inside the holder for an sd card. I formatted the card so there should be nothing on it. Every time I turn on the tablet, it wants me to transfer the files but there are no files to be transferred. How do I stop that and how can I start using the card for storage?
Thank you,
You need to do abit of reading. The external sd slot is used to transfer files between sd card and the internal And visa versa. There is apost that is looking into it. I am eargerly waiting to use the sd card to use as extra storage.
agree
diddy64 said:
You need to do abit of reading. The external sd slot is used to transfer files between sd card and the internal And visa versa. There is apost that is looking into it. I am eargerly waiting to use the sd card to use as extra storage.
Click to expand...
Click to collapse
That needs to get fixed right away. Seems very silly to do that, but Sony is known for doing silly things.
Now that the device is rooted, this should be doable by one of our more talented members.
dtaylorr said:
That needs to get fixed right away. Seems very silly to do that, but Sony is known for doing silly things.
Now that the device is rooted, this should be doable by one of our more talented members.
Click to expand...
Click to collapse
Your other option is to check the setting for the File Transfer app and choose not to be prompted every time, and then to stop using File Manager and start using something like Astro.
If you're using Astro File Manager, you can change the folder paths in the settings so that External SD Card leads to /mnt/sdcard2 and USB Storage leads to /mnt/usbdisk1 and you'll be ready to go.
agc93 said:
Your other option is to check the setting for the File Transfer app and choose not to be prompted every time, and then to stop using File Manager and start using something like Astro.
If you're using Astro File Manager, you can change the folder paths in the settings so that External SD Card leads to /mnt/sdcard2 and USB Storage leads to /mnt/usbdisk1 and you'll be ready to go.
Click to expand...
Click to collapse
Are you saying that this has been confirmed and working successfully?
Would this be a permanent adjustment, meaning it wont reset to default on system bootup?
Dear XDA'ers.
I've had an S2 for a while now and I've been running CM9 since early alpha. Recently I decided to buy an SD card (http://www.amazon.co.uk/gp/product/B005FY61EK/ref=oh_details_o01_s00_i00) so that I can use it to store my movies. After I got it, I realised that MoboPlayer or AirDroid couldn't detect the SD card and the only way I could put something on it was through a physical USB cable. Now, today I wanted to try something but I found out that my phone doesn't show the SD card at all anymore. I tried taking it out and putting it back in several times as well as flashing the latest CM9 nightly but nothing happened. The only apparent difference that I can see when I put the SD card in is that in the Storage section in Settings, under the SD card tab, I have an option "Mount SD Card" but when I press it, it says preparing SD card yet nothing happens.
Is the SD card fried or what's wrong with it?
I've had the SD card for less than a week so its hard to believe that it's dead already.
Have you got a micro SD card reader that you could use to see if the card is fried? Connect it to your computer, and if it shows up it isn't fried. Also check the format of the card to make sure it is in FAT32 format.
Chris.
Sent from my GT-I9100 using XDA
Ahh, I know the problem now (I completely forgot about this).
I formated it to NTFS just before I stopped working since I assumed that it works the same way a USB does (but clearly, I was wrong).
I'll format it back and see what's what.
Have u tried going into settings/memory/left softkey/storage config and select the only options there is?
have you tried other system folders?
i had the same problem before, I found out my sd card mounted as a system folder called "emmc" I'm using resurrection remix rom 2.3
Yep just fixed mine today by downloading https://play.google.com/store/apps/details?id=pl.qbanin.binder&hl=en if you are unsure of what to select just see the screenshots i followed this selections and it now works fine
Alright, I've fixed it.
Basically, I had formatted it to NTFS because otherwise it gave me some error about file (the file was around 4 gb's and it acted this way with anything over 3) being too big when I was trying to copy it onto the SD card. Now that someone said it has to be in FAT32, I formatted it back and now it works perfectly.
Thanks to everyone who helped me.