Bricked (and fixed) my razr yesterday thinking reverting to .211 would fix my compass. Didn't work. Seeing that it seems to be common. I'm wondering if anyone else has had issues with their compass, and if there's been a fix.
Just passed to ics and compass doesn't work. Any idea?
Sent from my XT910 using xda app-developers app
osmand work like a charm, gps status doesn't work sometimes, google maps simply refuse to turn. don't know what's going on.
I had this issue on gb and ics, has something to do with the magnetic field sensor getting stuck or the metal trim around the edge of the phone getting magnetised. I was able to get it to work again by pulling my sd card, doing a hard reboot (vol - and the power button, keep holding after the screen shot), reboot, open a compass app, I used smart tools, take something magnificent (be sure you have removed the sd card and not to use a very powerful magnet) then start moving the magnet circular around the phone at a great distance, moving closer until you see the compass start to move. I wouldn't touch the magnet to the phone or get closer than 1 1/2". It's risky. But if it's stuck, it may work it loose. You may also try degaussing your phone. Just do your research, because this is all very dangerous for your phone, and can render it useless.
Edit: you may want to check if just the hard reboot fixes it before you try anything else.
Sent from my DROID RAZR using xda premium
Degaussing?
I may have to give the magnet trick a cautious try as I already damn near bricked my phone trying to reflash the firmware.
n8w said:
Degaussing?
I may have to give the magnet trick a cautious try as I already damn near bricked my phone trying to reflash the firmware.
Click to expand...
Click to collapse
If the magnetic trick doesn't work, if you could find a tv repair shop or something similar that have the tools for degaussing (de- magnifying) and have them do it for you. There are tutorials online that show you how to build degaussing tools, but it's not a job for the faint of heart or something you should do with out understanding what you're doing.
The magnet trick worked for me, I used a magnet I use to magnify/demagnify screw drivers. Laid my phone on a table and went around my phone at about 1/2 foot away from it brought it in to about 3/10ths of a foot and all the sudden the compass started spinning with the magnet and my compass has worked ever since. Your biggest danger is 1. Magnetising the metal trim around the screen or 2. Corrupting the flash memory. Our phone should be shielded, but obviously not too well if were having this problem.
Let us know what happens, what you try and what ends up working /not working. Good luck!
Sent from my DROID RAZR using xda premium
The magnet trick kind of, worked but not really. I used a fairly strong magnet that I had on my fridge, and got it close enough where I could feel it tugging on the phone. Then, and only then did the compass move a bit, but it wasn't loosened into working. Did a reboot, no change.
Edit: I gave this a few more tries using the phone tester app to see if the values would register, then some more hovering my magnet over the compass app. It finally dawned on my that my pc speakers, which were no more than 8 inches away from the phone might be interfering. I moved to the middle of my room, and kept hovering the magnet around while using the smart tools compass this time. It registered a couple times, but nothing promising, then at some point it just started freaking the f*** out, and kept doing so even if I backed out of the app. Opened the other compass app, and whatduya know...it works! Went back to smart tools, reset that, and all is well there too.
n8w said:
The magnet trick kind of, worked but not really. I used a fairly strong magnet that I had on my fridge, and got it close enough where I could feel it tugging on the phone. Then, and only then did the compass move a bit, but it wasn't loosened into working. Did a reboot, no change.
Edit: I gave this a few more tries using the phone tester app to see if the values would register, then some more hovering my magnet over the compass app. It finally dawned on my that my pc speakers, which were no more than 8 inches away from the phone might be interfering. I moved to the middle of my room, and kept hovering the magnet around while using the smart tools compass this time. It registered a couple times, but nothing promising, then at some point it just started freaking the f*** out, and kept doing so even if I backed out of the app. Opened the other compass app, and whatduya know...it works! Went back to smart tools, reset that, and all is well there too.
Click to expand...
Click to collapse
Glad it worked!
Sent from my DROID RAZR using xda premium
Related
ok so i have a tmobile tp2 and been having it since the first week it was released.
for the pass couple of days the call, home, and back buttons wont function like they need to.
also when i slide my keyboard up the screen goes completely black even when i close my keyboard, the only way to fix it somewhat is to keep pushing the sleep/wake button untill it turns back on.
my guess is that maybe something like a cable became loose and is causing it to have these problems, and i just wanted to hear what you guys have to say about it, or what you think the problem is and what you would recommend to fix it because i cant afford to buy a new phone for quite awhile.
Posting in the Accessories forum might not be your best shot at an answer.
lilchicano said:
also when i slide my keyboard up the screen goes completely black even when i close my keyboard, the only way to fix it somewhat is to keep pushing the sleep/wake button untill it turns back on.
Click to expand...
Click to collapse
Sounds like an app running to me. Even File Explorer (when searching the Windows folder) can cause my phone to hang for a long time. I would check in task manager to see if something is running. You can also try and app called "Clean Ram", it works great. The other option is a hard reset, to ruke out software issues. It could be harware, but I doubt it.
Miami_Son said:
Posting in the Accessories forum might not be your best shot at an answer.
Click to expand...
Click to collapse
Very true.
It's likely a loose cable as you presumed. Hopefully you still have time left on your warranty.
I hate to be the oen to say it, but it sounds like your ribbon cable is going.... My son had the same thing happen on his Kaiser/Tilt (Grandpa to this Phone)... It started like you said... then got worse over the matter of a few weeks... His screen woudl only work when it was closed... the buttongs on the screen housign stopped working properly... then his memorycard reader (it was in teh screen part on that phone) went nuts... got to the point where that phoen was basically useless... I hope that isn;t your problem, but it sounds like it..
Teej53214 said:
I hate to be the oen to say it, but it sounds like your ribbon cable is going.... My son had the same thing happen on his Kaiser/Tilt (Grandpa to this Phone)... It started like you said... then got worse over the matter of a few weeks... His screen woudl only work when it was closed... the buttongs on the screen housign stopped working properly... then his memorycard reader (it was in teh screen part on that phone) went nuts... got to the point where that phoen was basically useless... I hope that isn;t your problem, but it sounds like it..
Click to expand...
Click to collapse
yeah i can pretty much say that it is the cable since i could still slide my keyboard but the screen just looks fuzzy like and when i close it, it takes time to adjust back to normal. so basically now its just an all touch screen phone to me now... sort of sucks since i miss using the keyboard so much.
and yeah the buttons got worst now to a point where none of them worked but somehow the back button started working again so thats the only button that does work now.
and a new problem started occuring in the last few days, the screen would turn on by itself with even a slight bump around where the battery is located, it really sucks for me cause it kills my battery faster and it just starts opening up random apps while its in my pocket.
I would like to hear what finally happened. People don't forget we are using WM phones. So no matter what the problem, hard reset before deciding!
schumifer1 said:
I would like to hear what finally happened. People don't forget we are using WM phones. So no matter what the problem, hard reset before deciding!
Click to expand...
Click to collapse
wow super late response to this.
but my final verdict is that it was the flex ribbon cable that is the issue.
my TP2 doesnt even show anything no more, its still functional but you just cant see whats goin on with the screen because its like its turned off.
it stopped working on me on dec 25,2010 (what a great present from the phone, huh?) to how i described it.
so now im using my sisters old HTC dream, but even this one is starting to have an issue with the ribbon cable too! i just get bad luck with these phones now i guess.
edit: oh yeah i still have my Rhod210 just sitting on my desk till i get it fixed... oh how i miss my TP2!
Another late response then
Fixed it yet, have you?
this occasionally happens to my phone too, that it, the screen blanks out sometimes. the cause in my case is pocket lint. since it's hayfever season, i carry tissues in my pocket which kind of disintegrate to confetti after a while. while my tp2 is in my pocket, these tissue particles tend to get in behind the ribbon cable and cause some kind of blockage. by just blowing in around the ribbon cable area, it tends to clear out those fluffy bits and the screen is working again. so don't carry tissues in your pocket with your tp2
schumifer1 said:
Another late response then
Fixed it yet, have you?
Click to expand...
Click to collapse
i actually took the time to open up the touch pro2 all the way today for a full diagnosis on it, and i was right. it was the cable. where the cable is exposed when it tilts, it looks like it sort of got stripped around that area. im not sure how but it left part of the cable exposed which im guessing is whats causing it to have the issue. i was taking a couple of pictures as i was disassembling it, but i forgot to take a picture of the cable itself to show you what i mean. maybe ill disassemble it again tomorrow so i can take a pic! =)
but yeah im still using the g1, and i finally fixed it! (ended up bricking a g1 so i used the other as replacement parts on it) but hopefully not for long cause graduation is tomorrow for me, and i MIGHT end up getting a new HTC phone as a graduation present from the family. so i hope that does happen!
ok so i reopened the touch pro 2 and took a pic of the cable to show you what i ment.
Has anyone had the problem that their Galaxy S2 randomly turns itself off when it's in their pocket.
It's happening quite often now, twice today, several times yesterday.
Take the phone out of my pocket and it's got a blackscreen that doesn't respond to being woken.
Holding the power buttons makes it reboot and all is fine again.
At first I thought it was because of the position of the power/wake button being pressed while in my pocket, but I've tried recreating this and it's not easy to do.
I am running Widgetlocker, so not sure if this is causing an issue.
It's an O2 branded phone, not rooted.
Cheers
I had it happen to me once, the first day I got it, but it hasn't happened since.
The only thing I can think of was that the phone was very very warm in my pocket, so I guessed that it might have overheated.
Yes, I did wonder if it was a heat problem. But it would have been sat there doing nothing so shouldn't have got too hot.
Sent from my GT-I9100 using XDA App
Now that's 3 times today. Within 5 minutes of being in my pocket.
Checked it straight away and it wasn't particularly warm.
Sent from my GT-I9100 using XDA App
Hi,
Happened to me few times, its not something very wrong with the phone.. What i did and after that I have no such reboots:
opens the back cover, cleaned the battery contact point (electric points) on battery and phone, put it back tightly, closed the back cover so there is not gap (not even a very small gap) between cover and phone..
after this never have reboots even having the phone in my pocket. hope this helps
Bobbajob said:
Has anyone had the problem that their Galaxy S2 randomly turns itself off when it's in their pocket.
It's happening quite often now, twice today, several times yesterday.
Take the phone out of my pocket and it's got a blackscreen that doesn't respond to being woken.
Holding the power buttons makes it reboot and all is fine again.
At first I thought it was because of the position of the power/wake button being pressed while in my pocket, but I've tried recreating this and it's not easy to do.
I am running Widgetlocker, so not sure if this is causing an issue.
It's an O2 branded phone, not rooted.
Cheers
Click to expand...
Click to collapse
nasgilani said:
Hi,
Happened to me few times, its not something very wrong with the phone.. What i did and after that I have no such reboots:
opens the back cover, cleaned the battery contact point (electric points) on battery and phone, put it back tightly, closed the back cover so there is not gap (not even a very small gap) between cover and phone..
after this never have reboots even having the phone in my pocket. hope this helps
Click to expand...
Click to collapse
Thanks for the tip. I've given it a good clean and put it back together and I'll monitor the situation.
Bobbajob said:
Thanks for the tip. I've given it a good clean and put it back together and I'll monitor the situation.
Click to expand...
Click to collapse
please post back with your findings - i've had the same a few times recently and it's annoying to say the least ...
This has never happened to me but hopefully nasgilani's method would work for you
nasgilani said:
Hi,
Happened to me few times, its not something very wrong with the phone.. What i did and after that I have no such reboots:
opens the back cover, cleaned the battery contact point (electric points) on battery and phone, put it back tightly, closed the back cover so there is not gap (not even a very small gap) between cover and phone..
after this never have reboots even having the phone in my pocket. hope this helps
Click to expand...
Click to collapse
I've seen this happen on other phones. The original Palm Pre needed a foam spacer in the second hardware rev. Maybe a piece of paper or two between the battery and the cover to make better contact. I'm happy saving 30 grams (and a better phone period) but this does chalk up a point to the Sensation build quality.
It's been okay so far today after cleaning the battery contacts and reseating the battery. But it has spent most of the day sat on my desk at work. So hardly a good test.
any update ? mine turned off again today. :-(
Mine has been doing this randomly as well. Its very annoying.
sohanlon07 said:
Mine has been doing this randomly as well. Its very annoying.
Click to expand...
Click to collapse
glad to hear that it's not just me. i really hope that it doesn't turn off in the middle of the night otherwise ...
It's been fine now for the last 3 days after cleaning the battery terminals and refitting the battery.
It looks like the battery was losing connection briefly while in my pocket causing it to turn off.
Sent from my GT-I9100 using XDA App
I also have the same issue. It's really hard to replicate the error and some days it doesn't happen. For some guy in this forum it turned out to be a faulty RAM... I hope this isn't the issue for us too!
A good way to check this is by enabling USB debugging, connecting to a pc and run "adb logcat" in the command console... then you wait for the phone to crash and post the logs here, hoping that someone will spot the error for you.
Sent from my disappointing GT - I9100
yup mine does too. some days 4 or 5 times some days not at all.
Have you tried giving the battery contacts and clean.
It might also be worth wedging a bit of paper folded up at the top of the battery to slightly increase the pressure on the terminals.
Mine only ever did it while the phone was in my pocket so a bit difficult connecting by usb.
Sent from my GT-I9100 using XDA App
This seems to be a widget locker problem for me. It opens with the home button even when locked does it not?
Just guessing.
Mine happened the last 2 nights, when i wake up I have to switch it on,
I have widget locker.
But i'm gonna uninstall it and see if it resolves it.
I had this going on but in my case I soon figured out that it was overheating from something that I'm guesssing had the phone at 100% although it was idle. Never did figure out what it was as a logcat showed nothing after the fact but that the phone was very hot to the touch if caught just after shutdown. That had been on villian rom which I liked but without being able to see a smoking gun in a logcat and never catching an app or system process running amok I ended up changing roms and the problem was gone. It should be noted that several people have reported doing a system reset and ridding themselves of this problem.
So my bro's had an Atrix for a little over a year.
Some time back, it started exhibiting this behaviour where the whole screen would just become totally unresponsive.
Searching around, I see issues where people lose responsiveness with a fraction of their touch screen, or the entire screen starts spazzing out with all these presses and swipe actions the user did not enter...
...but his just seems to have these periods. He'll be stuck at the lock screen from anywhere between 1 minute and a whole day... I can usually get it to work with random rapidfire hardware commands... and when it works, it works completely for a certain amount of time.
Thing is, that's only temporary, and the touch-screen ends up going back to an unresponsive state.
Any clue what's going on, or how to resolve it?
What's the software is he currently on? Is the phone bootloader unlocked and/or rooted?
Sent from my ATRIX using the Premium XDA App
You know what's (not so) funny about this? All of the things that you think are causing this sound really complicated. Is my phone corrupt? hardware defective?? etc etc.
You know what I found it caused this behavior after numerous factory resets and weeks of research and tweaks to my phone?
The f-ing goddam screen protector.
Yep, that's right. The over-priced, highly (over)rated $20 iShields brand one. I know for a fact that was the cause, after I figured it out and started talking to other atrix owners (minus the liar fanboys that lurk in every forum saying "works fine for me derp!" whenever someone dares to suggest a product has flaws).
Problem immediately went away, forever. I've gone naked since May /11 without a single scratch. IMO screen protectors on gorilla glass is for people who wear a seat belt in a car wash. I'm not sure, but I suspect the problem happens when the screen protector starts to age, and/or when it gets really warm. I also suspect it's a problem with certain phones and the types of touchscreens on those phones not playing nice with screen protectors. Started happening on mine after just one month.
omnius1 said:
You know what's (not so) funny about this? All of the things that you think are causing this sound really complicated. Is my phone corrupt? hardware defective?? etc etc.
You know what I found it caused this behavior after numerous factory resets and weeks of research and tweaks to my phone?
The f-ing goddam screen protector.
Click to expand...
Click to collapse
That rant's nice and all, and I'mma let you finish... but there's no screen protector. He's been going bare gorilla all since he got it...
Voelker45 said:
What's the software is he currently on? Is the phone bootloader unlocked and/or rooted?
Click to expand...
Click to collapse
Just to offer some backstory, this started a couple months ago back when he just had the stock AT&T rom (2.3.X or 2.2.X I think? I can't recall clearly) During one of it's "working" periods (last week), I unlocked his bootloader and flashed it with CM9...
Probably won't mean much since the problem existed before I unlocked+CM9'ed it, but while it's not freaking out, I can give you some numbers:
• Model Number: MB860
• Android Version: 4.0.3
• Baseband Version: N_01.77.15P
• Kernel Version: [email protected] #47
• CyanogenMod Version: 9.0.0-RC0-olympus-KANG
omnius1 said:
The f-ing goddam screen protector.
Click to expand...
Click to collapse
Yeh, I have had this problem with screen protectors interfering with capacitive screens before, I am now using some really cheap protectors (5 for £3) and have had no such problems since and have a good bit of pocket money left .
TLRtheory said:
That rant's nice and all, and I'mma let you finish... but there's no screen protector. He's been going bare gorilla all since he got it...
Click to expand...
Click to collapse
ah ok in that case, I have nothing else, I'm only good for ranting. GL!
My touchscreen randomly does these freak outs and stops working:
Usually for me it is caused when the phone is really warm (like on the charger in the car) or when my hands are sweaty (also could just be the the phone is warm in this case as well)
Once it's done with its freak out, I turn off the screen (my power button still works) and clean off the screen with my shirt, wipe the sweat off my hands and turn it back on...everything is then fine.
Also, with my old phone (dell streak) if I kept the phone in my pocket with the screen facing towards my leg it would exhibit this behavior (probably again a case of the screen becoming really warm) but if I kept it screen out it was fine.
I have the same exact problem and have gone back to my Captivate because I couldn't figure it out.
Sent from my Touchpad using XDA
News on this? Here's my experience.
Any news on this, guys? I'm going insane. Here's my experience: I used to get these touchscreen-stops now and then but then they started getting more and more often. What I do to make them stop for a while is a clean restore, that is wiping boot, system, preinstall, cache, userdata with fastboot before installing a new ROM or restoring from backup. Whenever I do that, it comes back to life. If I flash a new ROM without all those wipes, it doesn't work. What sucks so bad is that, even though that fixes the problem, it's only temporary. It starts again after a few weeks. There is NO way this is hardware, and there's also NO way we can't find a solution for this!!!! Come on, guys!!! HELP US OUT, PLEASE!!!!!!!
Have you tried the raindrop fix? I was having similar problems and it worked for me.
Sent from my MB860 using xda premium
My screen has ghost fingers if my hands are even the slightest damp.
A buddy of mine had really bad touch screen issues and had to send back for warranty.
Sent from my MB860 using xda app-developers app
I'm having the same issue
I'm having the exact same issue. It sometimes works, sometimes doesn't. Anywhere from one minute to a whole day, everything you described exactly. No screen protector. I wiped it once and it worked temporarily, but it's back to the old sporadic unresponsiveness again.
I'm still not convinced that it isn't a hardware issue. I'm going to buy a T5 Torx Screwdriver and open her up and see if one of the connections is loose. Has anyone else done this?
I'll post tomorrow night with my results.
Here is a handy trick to determine if your digitizer it going out.
1. Find an appliance like a cable set top box, AV receiver or computer for example
2. Lay your phone face down in the warm air that emits from devices like this.
3. Leave it alone for about 10 to 15 minutes.
4.Pick your phone up and perform some finger swipe heavy tasks.
If you notice its a lot more sensitive like you remember when you first got it then you have a digitizer that is going bad. If nothing changes then its most likely software related.
Okay so I took it apart (removed the motherboard, disconnected the radio and 3 cables, then put everything back together. It's not fixed 100% but it's a lot more consistent than it was. youtube dot com/watch?v=kxuF_73YIIY
cjmillisock said:
Okay so I took it apart (removed the motherboard, disconnected the radio and 3 cables, then put everything back together. It's not fixed 100% but it's a lot more consistent than it was. youtube dot com/watch?v=kxuF_73YIIY
Click to expand...
Click to collapse
Could be the ribbon behind the digitizer, if its loose or moves it can kill all response to touch. You may have to replace your digitizer to fix this.
Sent from my MB860 using xda premium
I'm dying here
I opened it up like the video explained. Everything looked OK. I used a heat gun at 50 C to eliminate any trace of humidity and put back everything in its place. Then, I did a full wipe and a new ROM flash. STILL NOTHING!!! This phone is a little over a year old! This is not possible :crying: Any new ideas???? THANKS!!!!
pichualvarez said:
I opened it up like the video explained. Everything looked OK. I used a heat gun at 50 C to eliminate any trace of humidity and put back everything in its place. Then, I did a full wipe and a new ROM flash. STILL NOTHING!!! This phone is a little over a year old! This is not possible :crying: Any new ideas???? THANKS!!!!
Click to expand...
Click to collapse
I would also suspect the digitizer. I replaced mine for $45 (frame pre attached attached highly recommended).
The connections are very small, so there is much that can go wrong while doing this kind of brain surgery and the ribbons will rip easily.
Sent from my MB860 using Tapatalk 2
Same problem here. It is like some Ghost is operating it without my permission
Sometimes feels like is should hit the phone on the wall.
I know its not gonna help.
Anybody there who has solution for this
After have a long time dealing with no gps lock with my phone I thought I would check inside and make sure the contacts were ok to the antenna. well come to find out they looked like they weren't even fully contacting the antennas contacts any longer.
IT IS AT THE USER'S DISCRETION
This should help take off the back to get to the contacts.....
https://www.ifixit.com/Guide/Samsung+Galaxy+Note+Display+Assembly+Replacement/16384
And the picture attached is the contacts you should pry up just enough that they stay bent up a little more then the were...if you bend them to far you could brake them off! So be careful!!!!!!
It has also been suggested to add a thin piece of plastic under the contacts to help hold them against the back cases antennas.
Before this fix I could drive 30-45min to work and never get a lock, after the fix it locked on inside my house within 3 sec of starting GPS Test! Good result!
I'd swear that's the wifi antenna contacts. That's exactly what I did to fix my poor wifi issue
Sent from a phone that's Note-worthy, via XDA Premium HD app.
This should be stickied. I just made the repair, and after months of no GPS, I finally get a fix again.
madman604 said:
I'd swear that's the wifi antenna contacts. That's exactly what I did to fix my poor wifi issue
Sent from a phone that's Note-worthy, via XDA Premium HD app.
Click to expand...
Click to collapse
Both those antennas are in that location but those contacts go to the top corner where the gps is....
exlplains a lot, i always thought antennas required 2 contacts. i guess the upper one is GPS and the lower is wifi/BT.
thanks
im hoping this thread does get stickied! I had to do some searching around to find out this info to compile it for this fix.
worked. Thanks!
Plus one on the stickie. i did this and as you can see in the pic it only took less than 30 seconds. Very cool find.
Sent from my SAMSUNG-SGH-I717 using xda premium
OP, just to clarify, have you always had GPS issues? If not, when did they start? Are you running ICS? Thanks!
bigmout said:
OP, just to clarify, have you always had GPS issues? If not, when did they start? Are you running ICS? Thanks!
Click to expand...
Click to collapse
GPS worked for maybe 3 months after I bought the Note when it first came out...it seamed like it would start to lock slower and slower till 4-6 months ago it wouldn't connect at all...it would see satellites but never connect. Ive been on GB ICS and JB...all had the same result with the gps. I've tried different modems and even odin flashing back to GB stock rom still the same story....im running AOPK Mile 1 right now with UCLF6 modem...
Thread has been cleaned and evaluated and not just by me...
As with any Mods/tweaks and especially with physically modification done to one's device...
IT IS AT THE USER'S DISCRETION.
So a Better Warning should be displayed in the OP.
Thread open & Thank you.
bigjoe2675 said:
Thread has been cleaned and evaluated and not just by me...
As with any Mods/tweaks and especially with physically modification done to one's device...
IT IS AT THE USER'S DISCRETION.
So a Better Warning should be displayed in the OP.
Thread open & Thank you.
Click to expand...
Click to collapse
Changes made thank you for the reopening the thread!
I personally did this when I was having GPS issues. I know it DOES work as before I couldn't get GPS lock now I can...within seconds.
And yes, there is always a chance you may damage your device but as long as you are careful and maybe watch some dismantling videos on YouTube it really isn't that hard. All I use was a tiny philips head screw driver and and plastic credit card to pry the device open.
Easy as that!
Well so far this did it for me :good: Initial testing in house was great, quick lock with many satellites in use. I'll be taking a drive later to see if it really worked. Never mind slow lock, I used to drop GPS signal often wile it was in use, so a roaming test is in order for me to be truly satisfied.
Barry (NJ) said:
Well so far this did it for me :good: Initial testing in house was great, quick lock with many satellites in use. I'll be taking a drive later to see if it really worked. Never mind slow lock, I used to drop GPS signal often wile it was in use, so a roaming test is in order for me to be truly satisfied.
Click to expand...
Click to collapse
Good to hear! let us know the results!
ksprelude01 said:
Good to hear! let us know the results!
Click to expand...
Click to collapse
All kinds of awesome :good: took a 15 mile drive and it tracked my location perfectly the whole way and never dropped the signal or gave me the circle of vague location.
If you're at all capable with common tools I highly recommend this fix. If you're not comfortable taking things apart and putting them back together, try to grab a friend who is, and have them do this for you.
Big thanks to you ksprelude01!!!
Barry (NJ) said:
Big thanks to you ksprelude01!!!
Click to expand...
Click to collapse
Not a problem man! Just glad it fixed it!
Another happy customer
I just wanted to chime in also, my GPS is working perfect once again!
Thanks for the info man, I also wanted to add that I used a small safety pin to pry up the pins...
You need good eyes cause those pins are tiny, so be careful! Lol
Thanks again.
Xtra
ksprelude01 said:
After have a long time dealing with no gps lock with my phone I thought I would check inside and make sure the contacts were ok to the antenna. well come to find out they looked like they weren't even fully contacting the antennas contacts any longer.
IT IS AT THE USER'S DISCRETION
This should help take off the back to get to the contacts.....
http://guides.durapowerglobal.com/Guide/How+to+Take+Apart+Samsung+Galaxy+Note+i717/4/1
And the picture attached is the contacts you should pry up just enough that they stay bent up a little more then the were...if you bend them to far you could brake them off! So be careful!!!!!!
Before this fix I could drive 30-45min to work and never get a lock, after the fix it locked on inside my house within 3 sec of starting GPS Test! Good result!
Click to expand...
Click to collapse
Wow. Just wow.
I was seriously pondering picking up a refurb or even the Nexus 4. I was at my wit's end. I figured, if my GPS doesn't work, what do I have to lose if I break something? So I did this, shoving a precision screwdriver under the antenna leads so they stand at about 10 degrees. I buttoned up the phone and finally got a GPS lock, albeit a slow one. After opening it again, I brought the angle to about 30 degrees.
BAM! From where I sat deep into a room with a window facing another house and a sliver of rainy skies, I was able to lock in my position in under 10 seconds.
Several reboots afterwards, each one confirming a quick position lock, I feel I can-beyond the shadow of a doubt-endorse this solution.
SPtheALIEN said:
Wow. Just wow.
I was seriously pondering picking up a refurb or even the Nexus 4. I was at my wit's end. I figured, if my GPS doesn't work, what do I have to lose if I break something? So I did this, shoving a precision screwdriver under the antenna leads so they stand at about 10 degrees. I buttoned up the phone and finally got a GPS lock, albeit a slow one. After opening it again, I brought the angle to about 30 degrees.
BAM! From where I sat deep into a room with a window facing another house and a sliver of rainy skies, I was able to lock in my position in under 10 seconds.
Several reboots afterwards, each one confirming a quick position lock, I feel I can-beyond the shadow of a doubt-endorse this solution.
Click to expand...
Click to collapse
Good to hear that there was another successful fix! Feels good to have gps back again doesn't it?
So I was going to try and put an SD card in my Motorola X2 one day and opened it up, the case came off kind of hard but I didn't think anything of it. When I turned it back on after putting the battery back in, this is what I saw (x2front1.jpg). After that I took the case back off and it seemed to work for a bit but if I wasn't careful and put the phone back in my pocket for awhile the screen would glitch out horribly. I found that simply hitting the phone on a hard surface would allow me use my phone and I would just have to be careful but now that doesn't even seem to be working, even with the case off. Is there any anyway to fix my phone or is it basically a brick? I can still slide my finger over the unlock button and I can tell it unlocks it but it doesn't show anything different. My contract is up in February and I was hoping to make it that long with a half functioning phone but I think I may be doomed. When making calls people can only hear me on speaker as well, I doubt that has any involvement in this but perhaps it does. Anyway, if anyone has any ideas or suggestions I will gladly try them, I cant cause much further harm from what it looks like to me. Thanks for your time!
skolden said:
So I was going to try and put an SD card in my Motorola X2 one day and opened it up, the case came off kind of hard but I didn't think anything of it. When I turned it back on after putting the battery back in, this is what I saw (x2front1.jpg). After that I took the case back off and it seemed to work for a bit but if I wasn't careful and put the phone back in my pocket for awhile the screen would glitch out horribly. I found that simply hitting the phone on a hard surface would allow me use my phone and I would just have to be careful but now that doesn't even seem to be working, even with the case off. Is there any anyway to fix my phone or is it basically a brick? I can still slide my finger over the unlock button and I can tell it unlocks it but it doesn't show anything different. My contract is up in February and I was hoping to make it that long with a half functioning phone but I think I may be doomed. When making calls people can only hear me on speaker as well, I doubt that has any involvement in this but perhaps it does. Anyway, if anyone has any ideas or suggestions I will gladly try them, I cant cause much further harm from what it looks like to me. Thanks for your time!
Click to expand...
Click to collapse
Sounds like the frame got warped.
Sent from my SCH-I535 using xda premium
looks like the lcd is bad, it can be replaced just look on ebay for droid X2 LCD
should be a link to a take apart video in my list
sd_shadow's [Collection] of Links for Droid X2
Sent from my Amazon Kindle Fire using Tapatalk 2