Razr 4.04 Root Trouble (not drivers) - Motorola Droid RAZR

I've followed the guides and I'm sure I'm doing everything right but my phone just wont root properly..
It finishes the root process without a hitch.. reboots my phone and says it's good to go .. but then when I try any root required apps they still say my phone isn't rooted and they don't have root access.
I'm running 4.04 ICS and have tried ICS404root as well as zergrush's rooter...
I had a look around the forums but other people just seem to be having trouble with the drivers.. anybody have any suggestions for me?
Thanks.

Ok so I found this rooter shortly after and it did the trick.
Props to Eternity Project
http://forum.xda-developers.com/showthread.php?t=1710871

Related

Need Rooting Help

I need some serious help. Ive been trying for days to get my phone re rooted again but nothing is working I have tried everything but nothing.
I upgraded my phone to 2.1
then i flashed the Generic 2.0.2.A.0.24 firmware and that was fine
then i flashed SW_Ging_Rom_V0.3 and then was fine
but i then i updated software from PcCompanion
and for the last 3 days i cannot root
I have tried every method and nothing and im getting frustrated.
Methods i have done
exploid got to rootshell, permission denied switched to superoneclick just looping
installed z4root (doesnt root)
Used superone click after looping used method to stop looping not working
tried to downgrade, flash not finding device
Done a factory reset. tried all methods nothing
cannot install recovery because i need to root. cannot change permissions because i need root cannot do anything because i need root.
Can anyone please help me.
try looking here, its probably the same thing.
http://forum.xda-developers.com/showthread.php?t=884771
My phone told me that it had an update today but i didn't bother updating.

Major issues with Lg506go(Optimus) 2.2.1 rooting...

Ok! Hi again folks. Today i was trying to root my wifes new lg506go(Optimus) and got a bit surprised with how the phone would respond to that. At first i thought it was going to be pretty simple using z4 root method. But it didnt work at all, tried a few times by the way. Then i decided to give it a go to superoneclick method but never made it either. Tried UniversalAndroot also just to make shure and it didnt work also. Downloaded Optimusroot.zip and tried the ADB method and every command was accepted but then when i enter the command rageagainstthecage it didnt work also. Some files are missing. It has superuser already installed but cant gain complete root acces. Oh, by the way tried gingerbreak also with no succes. Rom manager is installed but i cant flash the recovery because it doesnt have complete permissons. Can someone give me a different idea or am i just an unlucky guy? Thanks in advance!
Nevermind folks! I was using an older gingerbreak version than 1.2 and it was downloaded from a different website. Just downloaded gingerbreak 1.2 from here and the phone was rooted!

[Q] LG G2x rooting failure

I just upgraded to Gingerbread from Froyo. My phone was rooted on Froyo. I am attempting to root my phone using GingerBreak-v1.20.apk downloaded from the site. I followed the instructions. The rooting process seems to freeze up. I let it run for 30 minutes and finally rebooted my phone. The phone IS NOT rooted. None of my root applications work. I have several applications that need rooting. Can anyone help me? I have an LG G2x running Android 2.3.3. Thanks.
mmm try to install clockworkmod and after install cyanogen with the zip .
or if u want only root u could try root by paul ... search on modaco.com
Thanks, I'll give it a try.

[Q] Preferred root method for Bell Atrix 2.3.6 [A] Manual way

Hey, there seems to be a few of us(or maybe it's just me) confused about how we can root after the new update.
I just wanted to know if there was a confirmed safe way to restore root.
Thanks
Update:
Thanks to superkev. Manual way works. I can also confirm it also.
Also remember to keep your phone awake (ie. not in the locked screen)
superkev said:
I tried the manual instructions from here: http://briefmobile.com/motorola-atrix-4g-root
Step 6 failed for me, possibly because I had used this method to root 2.3.4. The rest of it went perfectly. I think the 2.3.6 update changed the permissions of the su binary, so these instructions just reset that to what they're supposed to be. I am rooted again!
Click to expand...
Click to collapse
I can't seem to find any root information on bell atrix 2.3.6 either.
saw some unconfirmed reports that superoneclick worked, but it doesn't work for me just sits at "Failed to set prot mask"
and then "WaitforDevice" forever...
if anyone has legit root info for the bell atrix 2.3.6 posting it would be greatly appreciated.
All I want is to install it! But im in usa so I need someone to make a fruitcake of it for me. Oh and I have also read super one click is supposedly working for some.
Sent from my MB860 using Tapatalk
I've got super one click working but superuser keeps denying all my root permissions without giving me a prompt.
DANGER!
So I tried SuperOneClick 2.3.1 and got my Bell Atrix 2.3.6 rooted.... all seemed good and Root Checker told me I was rooted. Light Flow got Super User permission and I thought I was gold!
Then my phone started freezing up and rebooting. Now I can't use the phone because it is crashing every 30 seconds. I would say avoid SuperOneClick (at least this version) for now!!
Oh, and SuperOneClick won't unroot my device so I'm kind of stuck. I would rather not reset my device and have to reinstall all my apps (which are backed up with Titanium Back-up, but which of course needs root to work...).
I'm just trying GingerBreak to unroot so we'll see how that goes.....
---------- Post added at 02:51 AM ---------- Previous post was at 02:44 AM ----------
... OK... so GingerBreak unrooted my phone but it is still completely hooped and the crashing woes continue... anyone with a solution on which system files I might be able to replace to fix this?!?!?
Aaaarrrg!
I tried wit Pete's first and it failed but super one click worked right from the first attempt. Before doing that though, I did a factory reset and started from scratch. Then I restored my apps only with TB. All is OK except that in market my apps list is empty with a message saying that my purchased apps will appear here. I have read that it is a known problem, but not necessarily with this update or because of rooting. In my experience super one click has otherwise been OK. Hope that helps. Don't have a solution for you except maybe trying to do a factory reset first if you are able to and then try again.
Sent from my MB860 using xda premium
Hey thanks. Yes, I ended up having to do a reset from the boot menu (power+vol down) and do an 'Android Recovery' which apparently wipes the system files and reinstalls the OS. My TB backups are still sitting on the internal SD but I am hesitant to re-root so I can reinstall TB and restore... what build of SuperOneClick did you use?
I tried with SuperOneClick 2.3.1.0 (latest). It says that it worked, but even after rebooting, my apps are being denied root access.
UPDATE:
I tried the manual instructions from here: http://briefmobile.com/motorola-atrix-4g-root
Step 6 failed for me, possibly because I had used this method to root 2.3.4. The rest of it went perfectly. I think the 2.3.6 update changed the permissions of the su binary, so these instructions just reset that to what they're supposed to be. I am rooted again!
I just updated to 2.3.6 and used the Briefmobile method to root and can also confirm that it is working. I had previously used this method to do 2.3.4 and had no issues on 2.3.6. Cheers
I might caution those who are not on AT&T about using the "manual" root method from BriefMobile. It was built with AT&T 2.3.4 files. Flashing the root.img in fastboot flashes those files to your /preinstall folder possibly hosing your Bell specific files. This has in the past, and possibly could in the future cause issues when trying to install future updates.
For those of you who have done it, can you look in /preinstall/md5 and see if you have att files?
Sent via 2.3.4 Rooted/Unlocked Moto Atrix using Tapatalk
superoneclick 2.3.1.0
this works flawlessly and on first attempt. so easy!
gingerbreak 1.2 didn't work this time, but it was useful to me for unrooting.
just make sure you do that before installing the update, and follow the superoneclick instructions.
too early to comment on battery life, and other than the keyboard I don't notice any aesthetic changes.
bell atrix
Remember to flash back the original preinstall image to avoid update issues.
Cheers!
das8nt said:
For those of you who have done it, can you look in /preinstall/md5 and see if you have att files?
Click to expand...
Click to collapse
That directory does contain some ATT and Cingular files. However, I used this method to root 2.3.4 and it didn't prevent me from installing the 2.3.6 update. I'm hoping I won't have any trouble going to ICS (fingers crossed that such a thing will even happen!)
superkev said:
That directory does contain some ATT and Cingular files. However, I used this method to root 2.3.4 and it didn't prevent me from installing the 2.3.6 update. I'm hoping I won't have any trouble going to ICS (fingers crossed that such a thing will even happen!)
Click to expand...
Click to collapse
Good deal. I had to help a few revert that folder when updating from 2.2.2 to 2.3.4 due to missing the gameloft stuff, but if it didn't effect your update that's good news.
Just in case, here's the 2.3.6 Bell stock preinstall.img to flash via moto-fastboot (thanks to NFHimself's new Gobstopper): http://www.megaupload.com/?d=C098P9IV
Sent via 2.3.4 Rooted/Unlocked Moto Atrix using Tapatalk
I used the manual way to root with the 2.3.6 update but TB is saying it can't can't gain root access and su keeps fc'ing on me. Anyone have any ideas what could be causing this? I also tried the superone click method but during the exe install on my pc it keeps stopping saying i don't have an internet connection????
j7logan said:
I also tried the superone click method but during the exe install on my pc it keeps stopping saying i don't have an internet connection????
Click to expand...
Click to collapse
that's weird. you definitely don't need internet access to perform the root (i was offline), provided you have superoneclick and phone drivers installed i'd say. does the driver check feature complain about it too?
Yeah, i thought it was strange too. It doesn't give me that error with the driver check, only when it is going through the install process of the exe.
Sometimes you need to treat your phone like a computer when it starts acting weird, save yourself some hassle and just do a format/factory reset and start fresh.
i used Doomlord's Rooting Toolkit: http://forum.xda-developers.com/show....php?t=1319653 it worked in 30 sec
Link to the exact Superoneclick you used? I tried the Doomloader link but it's broken.

Very stupid question

I had rooted my Atrix on 2.3.4 and all was well with the world. Did the 2.3.6 OTA update and it seems to have taken away my root access. So I tried to root it with SuperOneClick 2.3.3.0. I had used an earlier version of it to root 2.3.4. However it won't root it all the way. S.U.C. locks up and won't respond. I figure it's something stupid and simple that I'm overlooking, but I don't know what. The root process seems to go along quite well until it gets to the 7th step then nothing. It just freezes up. Any help or guidance would be GREATLY appreciated. The phone is working fine, but no root.
have you tried the pudding method? http://forum.xda-developers.com/showthread.php?t=1136261. Its how I rooted my phone, no issues.

Categories

Resources