I was wondering if it is normal for the kernel info under About-Software-More to always stay the same after a new kernel has been flashed? I have installed NilsP Business ICS (both 3.6&4.0) and both times the kernel says it is installed correctly but the name is unchanged when I look in setting under About-Software-More. My kernel always says: 3.0.16-hd0049f1 [email protected] #1 smp preempt. Any thoughts?
Thank you,
Alex
Sent from my Rezound using xda premium
adwmd03 said:
I was wondering if it is normal for the kernel info under About-Software-More to always stay the same after a new kernel has been flashed? I have installed NilsP Business ICS (both 3.6&4.0) and both times the kernel says it is installed correctly but the name is unchanged when I look in setting under About-Software-More. My kernel always says: 3.0.16-hd0049f1 [email protected] #1 smp preempt. Any thoughts?
Thank you,
Alex
Sent from my Rezound using xda premium
Click to expand...
Click to collapse
if you are s-on then you will need to flash the kernel out side of recovery. so unless nils rom installs then automatically rebooted you to hboot to finish the kernel wasnt installed.
i know he has in the second post the different kernels that are out. pick one, rename it to PH98IMG.zip and place it on root of sd card.
reboot to hboot and let it install.
done.
synisterwolf said:
if you are s-on then you will need to flash the kernel out side of recovery. so unless nils rom installs then automatically rebooted you to hboot to finish the kernel wasnt installed.
i know he has in the second post the different kernels that are out. pick one, rename it to PH98IMG.zip and place it on root of sd card.
reboot to hboot and let it install.
done.
Click to expand...
Click to collapse
Yes, I have done that and It successfully completes. I guess my concern is how do I tell I am running the correct kernel? It appears to me that the kernel name does not change when I look at about phone-software info-more then read the kernel version. Mine currently says 3.0.16-hd0049f1 [email protected] #1 smp preempt. I just installed business ice 3.6. Since I do not have S OFF will the phone display the default kernel even though one has been flashed over it?
Sent from my ADR6425LVW using xda premium
adwmd03 said:
Yes, I have done that and It successfully completes. I guess my concern is how do I tell I am running the correct kernel? It appears to me that the kernel name does not change when I look at about phone-software info-more then read the kernel version. Mine currently says 3.0.16-hd0049f1 [email protected] #1 smp preempt. I just installed business ice 3.6. Since I do not have S OFF will the phone display the default kernel even though one has been flashed over it?
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
as long as the kernel says 3.0.16 and the build number is 144 then they havent changed anything from the last 3 leaks.
synisterwolf said:
as long as the kernel says 3.0.16 and the build number is 144 then they havent changed anything from the last 3 leaks.
Click to expand...
Click to collapse
Okay, I'm just used to seeing a lot of Roms go with a custom kernel option. Coming from a rooted dinc, I used an incredikernel with a lot of the custom roms I used.I was concerned because it displays the exact same kernel as the ota ics update put out by Verizon. Do a lot of developers stick with stock kernels for rezound roms?
Sent from my ADR6425LVW using xda premium
adwmd03 said:
Okay, I'm just used to seeing a lot of Roms go with a custom kernel option. Coming from a rooted dinc, I used an incredikernel with a lot of the custom roms I used.I was concerned because it displays the exact same kernel as the ota ics update put out by Verizon. Do a lot of developers stick with stock kernels for rezound roms?
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
i came from the inc too. the reason there isnt that many options is because we dont have source for ICS yet. so as far as i know the .10 ruu is the latest kernel and the other 2 leaks that came after are still using that kernel.
once source drops we will see kernel development.
Thank you very much! I didn't realize we didn't have the source code yet. I really appreciate your help.
Sent from my ADR6425LVW using xda premium
Related
Here's the stock kernel from software ver 1.13.651.7, flashable through recovery, of course.
Thank you.
Sent from my PG86100 using XDA Premium App
Thanx for this.
Sent from my PG86100 using XDA Premium App
Finally! Thanks man!
Wow thanks.
thanks.........
Thanks dude. Not sure what I did but my battery started discharging crazy fast this morning, I had to switch back to stock.
[Kernel] Modified Stock 2.08.651.2 (2.6.35.13-g84f8edd)
Adding new kernel to new post.
Good looking man. Thanks.
Locked & Loaded
" Shooter on Deck"
Has anyone flashed this kernel?
I downloaded this from the link at the top, and flashed via TWRP recovery (yes I did wipe the caches).
After I rebooted, I checked the Kernel version, and either it didn't work, or the version of this kernel is the same as the original one I had, 1.11.651.3. In fact, I tried this twice, but the results are still the same.
Am I missing something?
Dudemeister said:
Has anyone flashed this kernel?
I downloaded this from the link at the top, and flashed via TWRP recovery (yes I did wipe the caches).
After I rebooted, I checked the Kernel version, and either it didn't work, or the version of this kernel is the same as the original one I had, 1.11.651.3. In fact, I tried this twice, but the results are still the same.
Am I missing something?
Click to expand...
Click to collapse
Do you have hboot 1.5? Just asking because there are ~2 more steps to take before flashing a kernel... Or I heard you can use Flash Image GUI.
Sent from my Infected EVO3D! Virus, you rock!
I flashed a AOSP kernel, and my rom didn't load. so I restored a backup and my wifi didn't work and also. So i flashed this kernel and now my backup doesn't work or even any rom that I have downloaded.
using viperrom before.
now nothing is working
questions is:
1. is there a way to flash a kernel, using recovery?
2. what roms work with this kernal?
im getting really sick of this evo3d.
TheFlatulentFox said:
questions is:
1. is there a way to flash a kernel, using recovery?
2. what roms work with this kernal?
Click to expand...
Click to collapse
1. Yes, so long as you are NOT HBOOT 1.5
2. This is a stock HTC Sense kernel as clearly outlined in the OP. It is not AOSP.
SteelH said:
1. Yes, so long as you are NOT HBOOT 1.5
2. This is a stock HTC Sense kernel as clearly outlined in the OP. It is not AOSP.
Click to expand...
Click to collapse
yeah I have Hboot 1.5
and I know I installed a kernel for AOSP and downloaded an AOSP rom. I should have said that before. but The AOSP rom didnt load, it just hanged on the HTC screen. So i recovered my backup using still on the AOSP kernel, it worked excluding WIFI and some other stuff. so I installed this kernel using GUI app, and restored my back up again. and now it just hangs.
now I can't find a rom for this kernel I downloaded three different roms, all sense. none of them are working.
TheFlatulentFox said:
yeah I have Hboot 1.5
and I know I installed a kernel for AOSP and downloaded an AOSP rom. I should have said that before. but The AOSP rom didnt load, it just hanged on the HTC screen. So i recovered my backup using still on the AOSP kernel, it worked excluding WIFI and some other stuff. so I installed this kernel using GUI app, and restored my back up again. and now it just hangs.
now I can't find a rom for this kernel I downloaded three different roms, all sense. none of them are working.
Click to expand...
Click to collapse
Someone correct me if I'm wrong, but I'm almost positive this kernel is WAY outdated (note the date of the OP)
So I have been browsing around and have decided to flash the newest version of Sebastian's overclocked kernel. I am S-Off on the newest HBOOT currently running zhp's Vigor 1.1 on the latest ICS RUU.
I am assuming I just flash the zip provided (kernel) via recovery correct? Also, what programs do you guys use in order to tune the speed of the cpu's? Is it built into the kernel?
I have also been hearing that people get problems flashing the kernel straight up, and that they need to flash the stock kernel before hand then flash Sebastian's over that. Is this true?
Thanks in advance.
Answers
996 said:
So I have been browsing around and have decided to flash the newest version of Sebastian's overclocked kernel. I am S-Off on the newest HBOOT currently running zhp's Vigor 1.1 on the latest ICS RUU.
I am assuming I just flash the zip provided (kernel) via recovery correct? Also, what programs do you guys use in order to tune the speed of the cpu's? Is it built into the kernel?
I have also been hearing that people get problems flashing the kernel straight up, and that they need to flash the stock kernel before hand then flash Sebastian's over that. Is this true?
Thanks in advance.
Click to expand...
Click to collapse
Flash in recovery ( make sure not cwm, our phones dont seem to like that one too much, I would use Amonra for something as serious as a kernel, then switch back TWRP for fun), simple as that, i wipe cache and dalvik but heard that it was unnecessary. You wont lose anything if you do
I use incredicontrol by chad, but sebastians doesn't have fast charge built in. SO that option wont be available.
People get problems because they are s-on flashing it, you dont have to worry, make sure you dont have a ph98img stored on your sd card in case of trouble you can just go to recovery from hboot and flash a different kernel. and make sure u match the kernel with your rom of course, sense 4 , sense 3.6 , aosp , or whatever, i see your rom but i am making sure you understand you cant just slap a kernel that was intended for a different platform.
Changing voltage ABILITY is built in the kernel, but to harness it , you need an app , once again i like incredit kernel, i am hearing issues with setcpu, choose your flavor.
jmichaels1982 said:
Flash in recovery ( make sure not cwm, our phones dont seem to like that one too much, I would use Amonra for something as serious as a kernel, then switch back TWRP for fun), simple as that, i wipe cache and dalvik but heard that it was unnecessary. You wont lose anything if you do
I use incredicontrol by chad, but sebastians doesn't have fast charge built in. SO that option wont be available.
People get problems because they are s-on flashing it, you dont have to worry, make sure you dont have a ph98img stored on your sd card in case of trouble you can just go to recovery from hboot and flash a different kernel. and make sure u match the kernel with your rom of course, sense 4 , sense 3.6 , aosp , or whatever, i see your rom but i am making sure you understand you cant just slap a kernel that was intended for a different platform.
Changing voltage ABILITY is built in the kernel, but to harness it , you need an app , once again i like incredit kernel, i am hearing issues with setcpu, choose your flavor.
Click to expand...
Click to collapse
Thank you for your great response. I think this is for Sense 3.6. I will also try out incredicontrol and get back to you on that.
*EDIT
Where can I find out that this is for 3.6?
Edit:
To add to this it look like it will work on any ROM that has a unsecured boot.img. Now I haven't tested that..
Here you go
Edit : I would listen to zone ... lol he is awesome ...
Ah alright. Are you on this kernel zone?
*edit.
Thanks for the input on which firmware version this has to be run on.
Sent from my ADR6425LVW using xda premium
996 said:
Ah alright. Are you on this kernel zone?
*edit.
Thanks for the input on which firmware version this has to be run on.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Yes I am. It will run on 3.14 or 4.03 as long as you are flashing over a kernel that it unsecured.
zone23 said:
Yes I am. It will run on 3.14 or 4.03 as long as you are flashing over a kernel that it unsecured.
Click to expand...
Click to collapse
hmm. alright that sounds alright. How can I find out if the kernel is unsercured? I am running the stock kernel which was included with zhp's vigor 360 1.1
*edit.
found out that the kernel on vigor is unsecured.
Thank you for your help!
One more question. What setup are you guys running? ex: voltage levels and cpu levels?
sorry wrote this way too many times
996 said:
One more question. What setup are you guys running? ex: voltage levels and cpu levels?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=31267314&postcount=8
I've tried flashing all custom sense kernels on both stock with goodies and meanrom to no avail. Also can't use evo lte oc or dual core mod for sense roms.. Any ideas??
Sent from my EVO using xda premium
Are you using the right kernel and not a jb one? What does it do when you try to flash one, we need a little more info.
My apologies.. It was booting to a black screen.. I think I realized the problem, tho when zarboz kernel was updated to work with the new base. Maybe I'm wrong, I still have a lot to learn here... But it flashed and booted..
Sent from my EVO using xda premium
Yeah most of the kernels we have are for the old base. Have to make sure the bases match.
Sent from my EVO using xda premium
edited: mistake
aimbdd said:
Yeah most of the kernels we have are for the old base. Have to make sure the bases match.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
The new zarboz kernel is supposed to be for the newest base 2.13. Source was released last week.
I having trouble flashing new kernel on meanrom 4.3. I keep getting the black screen as well. S-off running 2.13 firmware bits. I can see the kernel zip on my sd-ext but when I flash I get black screen. Any suggestions.
beerbq said:
I having trouble flashing new kernel on meanrom 4.3. I keep getting the black screen as well. S-off running 2.13 firmware bits. I can see the kernel zip on my sd-ext but when I flash I get black screen. Any suggestions.
Click to expand...
Click to collapse
You don't need to flash a kernal with MR 4.0 and higher just run the 4.3 zip and go and 4.4.2 is OC'ed @ 1.89 and 4.4.3 is OC'ed @1.79 using EvilZ kernal baked in
Ok I just thought it wasnt there because in the settings about phone the kernel version never changed. So is there a way to change governors with this kernal?
beerbq said:
Ok I just thought it wasnt there because in the settings about phone the kernel version never changed. So is there a way to change governors with this kernal?
Click to expand...
Click to collapse
Yea use no frills from the play store
banccalif said:
Yea use no frills from the play store
Click to expand...
Click to collapse
I have no frills but its not letting me change the governor. Im on meanrom 4.4.
beerbq said:
I have no frills but its not letting me change the governor. Im on meanrom 4.4.
Click to expand...
Click to collapse
4.4.4? If so did you flash the OC on zip? You might be running the stock kernel instead of the custom..
What is a Cubed Kernel? Is it the one that came with Droid DNA? I see version 2.4.2 floating around. Mine is 3.4.10.
What is the main advantage of flashing a new version of kernel?
arun1151 said:
What is a Cubed Kernel? Is it the one that came with Droid DNA? I see version 2.4.2 floating around. Mine is 3.4.10.
What is the main advantage of flashing a new version of kernel?
Click to expand...
Click to collapse
You have to have a rooted phone to flash kernels. The Cubed kernel is a modified kernel for root users that gives you the ability to overclock your phone, better battery life and such. It is not the one that came with the DNA, the DNA is the stock kernel from the factory. Don't go by the numbers you see because they are 2 totally different kernels for totally different reasons...
Kernel restarting the phone
Jrocker23 said:
You have to have a rooted phone to flash kernels. The Cubed kernel is a modified kernel for root users that gives you the ability to overclock your phone, better battery life and such. It is not the one that came with the DNA, the DNA is the stock kernel from the factory. Don't go by the numbers you see because they are 2 totally different kernels for totally different reasons...
Click to expand...
Click to collapse
I did root my phone through a very convoluted method involving imei numbers etc. I flashed the boot.ini and the cubed kernel yesterday and was able to verify it. I did not reset factory or anything when I flashed the kernel. Now it has restarted by itself for more than 50 times in 12 hours. I am trying to find the stock kernel.
Have anyone faced the same issue?:crying:
arun1151 said:
I did root my phone through a very convoluted method involving imei numbers etc. I flashed the boot.ini and the cubed kernel yesterday and was able to verify it. I did not reset factory or anything when I flashed the kernel. Now it has restarted by itself for more than 50 times in 12 hours. I am trying to find the stock kernel.
Have anyone faced the same issue?:crying:
Click to expand...
Click to collapse
I get random restarts as well on Cubed Kernel - untouched, didnt even change the governors. I guess a lot more optimizing needs to be done to it to support the variations in our devices.
yevgenydev said:
I get random restarts as well on Cubed Kernel - untouched, didnt even change the governors. I guess a lot more optimizing needs to be done to it to support the variations in our devices.
Click to expand...
Click to collapse
it does, and I request on behalf of the Dev, to post in the kernel thread, with logs, and kmsg. this is the only way we can figure out the bugs,
more people who post, the quicker issues are found.
Kernel errors
dr_drache said:
it does, and I request on behalf of the Dev, to post in the kernel thread, with logs, and kmsg. this is the only way we can figure out the bugs,
more people who post, the quicker issues are found.
Click to expand...
Click to collapse
Can you point me to that thread ? Also any info about how to retrieve logs/kmsg from my phone would help me a lot.:good:
arun1151 said:
Can you point me to that thread ? Also any info about how to retrieve logs/kmsg from my phone would help me a lot.:good:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2024776
Sent from my HTC6435LVW using xda app-developers app
I was able to flash cubed kernel, but the phone keeps restarting often. Also it shuts down and when I try to start, all keys keep blinking for a while and then starts. I can provide loss and kmsgs of someone points me to how to do it and if I can share my Dropbox link.
Please help, also I am on the kang bang rom.
Sent from my HTC6435LVW using XDA Premium HD app
Problem with cubed kernel
klarson said:
http://forum.xda-developers.com/showthread.php?t=2024776
Not able to post to the kernel thread as I don't have 10 posts. Not sure how to submit kmsgs and logs to the developer. The restarts are killing my phone. If someone knows how to go back to the stock kernel please help.
Sent from my HTC6435LVW using XDA Premium HD app
Click to expand...
Click to collapse
arun1151 said:
klarson said:
http://forum.xda-developers.com/showthread.php?t=2024776
Not able to post to the kernel thread as I don't have 10 posts. Not sure how to submit kmsgs and logs to the developer. The restarts are killing my phone. If someone knows how to go back to the stock kernel please help.
Sent from my HTC6435LVW using XDA Premium HD app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=35845214
This is the stock kernel but just modified to be able to write to the system while booted. It basically is the stock kernel and will work exactly like the stock kernel does. To switch kernels, just do what you did before when you installed the kernel you're on now. Just make sure you flash the correct module zip in recovery after you flash it.
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
Kasab said:
arun1151 said:
http://forum.xda-developers.com/showthread.php?p=35845214
This is the stock kernel but just modified to be able to write to the system while booted. It basically is the stock kernel and will work exactly like the stock kernel does. To switch kernels, just do what you did before when you installed the kernel you're on now. Just make sure you flash the correct module zip in recovery after you flash it.
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
Does that mean that if we don't flash a cubed Kernel, we won't be able to flash for example a modefied or themed apk or framework.apk to our DNA ?
Click to expand...
Click to collapse
I flashed my phone from twrp to the new Verizon update that was recommended here. But now my phone is flickering every 20 seconds or so. Any ideas? thanks.
Sounds like you are using an old kernel on the new update
Sent from my HTC6435LVW using xda app-developers app
I didn't know I needed to upgrade. Can you tell me how to fix?
Bigandrewgold said:
Sounds like you are using an old kernel on the new update
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
commandlinekid said:
I didn't know I needed to upgrade. Can you tell me how to fix?
Click to expand...
Click to collapse
You need to run a 2.04 kernel with a 2.04-based ROM. Running a 1.15 kernel with a 2.04-based ROM will cause the flickering, so you need to pair a 1.15 kernel with a 1.15 ROM or a 2.04 kernel with a 2.04 ROM. What Kernel/ROM combination did you flash?
SAMPCam said:
You need to run a 2.04 kernel with a 2.04-based ROM. Running a 1.15 kernel with a 2.04-based ROM will cause the flickering, so you need to pair a 1.15 kernel with a 1.15 ROM or a 2.04 kernel with a 2.04 ROM. What Kernel/ROM combination did you flash?
Click to expand...
Click to collapse
The file I used was from the first post here:
http://forum.xda-developers.com/showthread.php?p=38015322
which should be: DNA-OTA-Stock-Rooted-2.04.605.2 710RD.zip
And from my phone: the kernel from Settings>About>Software Information>More is:
---------------------------------------
Kernel version
3.4.10-g4d47dce
[email protected] #1
SMP PREEMPT
Build number
2.04.605.2.CL147796 release-keys
/---------------------------------------
Also note: The pop-up that still keeps popping up on my phone from StupidVerizon that it wants to upgrade to is:
HTC6435LVW_2.04.605.2-1.15.605.4