Hi everyone,pretty new to the website.I have a question about the TP.
I rooted my LG Lucid and I have wifi tether.Everything else can see the SSID but my TP.Is there a reason?Please help,thanks!
I
Sent from my VS840 4G using xda app-developers app
What ROM are you on?
Sent from my cm_tenderloin using xda premium
I'm on stock 2.3.6
Sent from my VS840 4G using xda app-developers app
I think he meant what ROM are you on on the Touchpad.
Oh,
Ice Cream Sandwich
chicle_11 said:
I think he meant what ROM are you on on the Touchpad.
Click to expand...
Click to collapse
ry_t said:
Oh,
Ice Cream Sandwich
Click to expand...
Click to collapse
CM9 Alpha? CM9 Nightly ___? AOKP? OaT? Version?
bananagranola said:
CM9 Alpha? CM9 Nightly ___? AOKP? OaT? Version?
Click to expand...
Click to collapse
Funny guy hey?
Go to System Settings - About Tablet, scroll down until you see "CyanogenMod version"
I am asking because ad-hoc tethering was only recently implemented into the CM9 for Touchpad. Updating your ROM could be the first step to take in troubleshooting the problem.
Bought the Tablet used on ebay.Sorry I'm new to this completely.It's Classicnerd
build number is classic_tenderloin-eng 4.03 IML74k eng.leoisright.20120319.184132 test keys
ry_t said:
Bought the Tablet used on ebay.Sorry I'm new to this completely.It's Classicnerd
build number is classic_tenderloin-eng 4.03 IML74k eng.leoisright.20120319.184132 test keys
Click to expand...
Click to collapse
If you want to stick with Classicnerd, it's at 4.04.5 now; latest is from 06-05-12. Updating it might help; I'm not familiar with Classicnerd. If you want something more updated, try CM9 Nightlies. I believe CM9 Alphas still have wifi issues.
Can you link me?I bought the tablet used installed with Classic nerd.Thanks
Sent from my Touchpad using xda app-developers app
bananagranola said:
If you want to stick with Classicnerd, it's at 4.04.5 now; latest is from 06-05-12. Updating it might help; I'm not familiar with Classicnerd. If you want something more updated, try CM9 Nightlies. I believe CM9 Alphas still have wifi issues.
Click to expand...
Click to collapse
Right now I am running Oat CM9, and I highly recommend it. Just reboot into recovery and install .zip from SD card.
I don't even have wireless, just an unlimited data plan that I tether to 100% of the time... it's like I have a 3G touchpad because I am never without my phone :good:
What do I have to download in order to install it from the SD?I'm in recovery right now.Like I said in the previous post,I'm a complete noob.
-SGA- said:
Right now I am running Oat CM9, and I highly recommend it. Just reboot into recovery and install .zip from SD card.
I don't even have wireless, just an unlimited data plan that I tether to 100% of the time... it's like I have a 3G touchpad because I am never without my phone :good:
Click to expand...
Click to collapse
ry_t said:
What do I have to download in order to install it from the SD?I'm in recovery right now.Like I said in the previous post,I'm a complete noob.
Click to expand...
Click to collapse
Download the ROM and GAPPS on your PC
Boot your TouchPad into Recovery
Connect your TouchPad to PC with a microUSB cable
On the TouchPad, navigate to "-mounts and storage" with the volume buttons and press the home button to select.
Navagate to "-mount USB storage" and select
On your PC you should see the prompt for connecting a USB drive called HP TouchPad, click "Open folder to view files"
Copy "whateverromyoudownloaded.zip" to the SD card without placing it into a folder
Unmount the TouchPad from your PC via "Safely remove hardware and eject media"
On the TouchPad select "-Unmount" and navigate to "-+++++Go Back+++++" and select that too
Navigate to -"install zip from sdcard" and select it
You will be in another menu where you will select "-choose zip from sd card"
Navigate to "whateverromyoudownloaded.zip" and select it
In the following menu navigate to "-Yes" and select it
You will see the update installing
Once finished navigate to "-+++++Go Back+++++" and select it
Use the same install zip method to flash GAPPS
In the main menu navigate to "-advanced" and select it
Navigate to "-Wipe Dalvik Cache" and select it
In the following menu navigate to "-Yes - Wipe Dalvik Cache" and select it
The Dalvik Cache will then be wiped and you will see a new menu where you will navigate to "-+++++Go Back+++++"
In the following menu you will have "-reboot system now" highlighted, select it
You have updated the ROM.
You will now boot into Moboot where you will select "boot CyanogenMod"
Done!
Thanks!It worked
ry_t said:
Can you link me?I bought the tablet used installed with Classic nerd.Thanks
Sent from my Touchpad using xda app-developers app
Click to expand...
Click to collapse
Here's the link for the nightlies : http://forum.xda-developers.com/showthread.php?t=1568685
Try to read as much as you can of the forum. It's one of the best ways to learn about this stuff.
I updated Classicnerd,but I will look into that when I have the time,thank you for pointing things out
Related
just picked up a NT 8gb...
it's running v1.4.2 but i still got it rooted...i got Android Play Store (market) working... i installed the 'NT Hidden Settings' app and selected allow installs from uknown sources...yet, this doesn't seem to stick when i exit the setting...so this may be my problem #1
problem #2...i have read tons of posts from this and other sites and i can't for the life of me get CWM installed so that i can install CM7 or any other rom...a lot of the links i hit are for just the 16gb version and some say i should downgrade to 1.4, yet there is a method for rooting if on 1.4.2...very confusing...
do i need to downgrade to v1.4? what is the easiest method...
i currently have the recovery flash apk, google apps and cm7 on an sd card but this really doesn't do me any good if i can't get into CWM...
btw, if i select the .apk from withing the NT, it tells me that it's not a supported file type...
*heeellllpppp*
Read my faq, setup adb and come back when you have done that.
~ Veronica
Sent from my Nook Tablet using xda premium
antmon said:
just picked up a NT 8gb...
it's running v1.4.2 but i still got it rooted...i got Android Play Store (market) working... i installed the 'NT Hidden Settings' app and selected allow installs from uknown sources...yet, this doesn't seem to stick when i exit the setting...so this may be my problem #1
problem #2...i have read tons of posts from this and other sites and i can't for the life of me get CWM installed so that i can install CM7 or any other rom...a lot of the links i hit are for just the 16gb version and some say i should downgrade to 1.4, yet there is a method for rooting if on 1.4.2...very confusing...
do i need to downgrade to v1.4? what is the easiest method...
i currently have the recovery flash apk, google apps and cm7 on an sd card but this really doesn't do me any good if i can't get into CWM...
btw, if i select the .apk from withing the NT, it tells me that it's not a supported file type...
*heeellllpppp*
Click to expand...
Click to collapse
My reading is that the 8gig never was 1.4.0 so you can't downgrade. You say you are rooted and then ask about rooting. I have never had NT hidden settings stick. I would set it, leave it on the screen, hit home, search my file browser run it and use that to install my apk. This left NT hidden settings running and worked for me.
Good Luck!
oh, the reason for the confusion while searching is most threads were started before anyone dreamed of an 8gig and they have not been updated to reflect that it now exist. Most probably never will be updated. Look for specific 8gig info and assume if it is not spelled out that it does not apply to you.
lavero.burgos said:
Read my faq, setup adb and come back when you have done that.
~ Veronica
Sent from my Nook Tablet using xda premium
Click to expand...
Click to collapse
reviewing and installing from this now, thanks...
http://forum.xda-developers.com/showpost.php?p=22049356&postcount=1
lavero.burgos said:
Read my faq, setup adb and come back when you have done that.
~ Veronica
Sent from my Nook Tablet using xda premium
Click to expand...
Click to collapse
We were typing at the same time. Thanks for replying as I just realized my suggestion would not be good as the wrong recovery would have been pushed.
Thanks for saving my bacon!
lavero.burgos said:
Read my faq, setup adb and come back when you have done that.
~ Veronica
Sent from my Nook Tablet using xda premium
Click to expand...
Click to collapse
adb is in...
says 'USB debugging connected' now on the NT...in Device Manager it shows the NT connected as 'Android Composite ADB Interface'...and the 2gb sd card is visible from the connected NT...
adb is in...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=22049356&postcount=1
yes, am set up correctly...
but when i click the flash recovery apk...it downloads as an apk to my pc and i can't install...or if i download from NT directly, it says it doesn't recognize the format...
http://forum.xda-developers.com/showpost.php?p=21684160&postcount=1
antmon said:
adb is in...
says 'USB debugging connected' now on the NT...in Device Manager it shows the NT connected as 'Android Composite ADB Interface'...and the 2gb sd card is visible from the connected NT...
Click to expand...
Click to collapse
Good now type adb devices and verify if you get the code under ( which means your device is being recognized) . You need to click on the runmefirst.bat if you havent yet.
~ Veronica
Sent from my Nook Tablet using xda premium
antmon said:
yes, am set up correctly...
but when i click the flash recovery apk...it downloads as an apk to my pc and i can't install...or if i download from NT directly, it says it doesn't recognize the format...
http://forum.xda-developers.com/showpost.php?p=21684160&postcount=1
Click to expand...
Click to collapse
Use adb push command or adb install to push the recovery flasher app, once done use adb kill-server and unmount safetly nook tablet from windows. Then in your nook tablet search for the app an open it once there let me know. You have to wait 10 seconds after you click on the flash recovery button for precaution and before you click on the reboot to recovery button.
~ Veronica
Sent from my Nook Tablet using xda premium
finally....
ok, have booted into CWM...(which looks just like my Samsung EPIC's version )....
am going to select install from sd and pick the cm7 rom now, yes?
also, how long should it take for the whole finding update package, opening update package, etc etc etc...
antmon said:
finally....
ok, have booted into CWM...(which looks just like my Samsung EPIC's version )....
am going to select install from sd and pick the cm7 rom now, yes?
Click to expand...
Click to collapse
i remind you to read my faq about the warnings for 8gb model if you havent yet
~ Veronica
Sent from my Nook Tablet using xda premium
thanks...
but, hmm...it's been sitting on "Opening update package..." for like 6min now...
is that normal? there a way to get out of this and try again?
*ugh* 10min and nothing is happening still.....
well, i was defin frozen.... held the power button and that got me back in to the NT...no CM7 installed...
almost feel like returning this and spending the extra $50 bucks for the 16gb version and not have to go through the stuggle...
is there something different i should be doing besides just installing the cm7 zip??? i don't get why it's not running...
antmon said:
well, i was defin frozen.... held the power button and that got me back in to the NT...no CM7 installed...
almost feel like returning this and spending the extra $50 bucks for the 16gb version and not have to go through the stuggle...
is there something different i should be doing besides just installing the cm7 zip??? i don't get why it's not running...
Click to expand...
Click to collapse
try wiping data, cache and dalvik cache and try again.
Verify the md5 of the file to make sure the file is not corrupted.
~ Veronica
Sent from my Nook Tablet using xda premium
no dice... tried that....
now i can still get into CWM from the power+N button press but it's still not letting me install..just hangs...
if i just power up, the NT hangs on the "Read Forever" screen...
i think i need to somehow revert back to the B&N rom and return this thing...
antmon said:
i think i need to somehow revert back to the B&N rom and return this thing...
Click to expand...
Click to collapse
Did you make a backup of your stock rom before attempt to flash cm7? If so flash that if not you will have to download official stock 1.4.2 from B&N support web page, copy it to your sdcard and make it boot (like the acclaim_update.zip process) it should flash automatically.
~ Veronica
Sent from my Nook Tablet using xda premium
no, didn't.... i'm an ape and totally messed this thing up....
if i grab the official 1.4.2 from B&N support, i can just flash that from CWM then, if i place it on the root of the sd card?
not sure why i couldn't get any of this to work...have used CWM before and messed with quite a few roms on my samsung epic pretty easily...
Hello once again,
This Rom is based on latest Nook Tablet CM10.1 Branch courtesy of our great developers aka Kuzma,Chris,Rebellos etc.
It has SGT7 modifications taken from https://github.com/sgt7 plus cherry picks from https://github.com/loosethisskin.
Links:
Updated Rom 28/03/13:
http://goo.im/devs/meghd00t/sgt7/sgt7_10.1-20130328-acclaim-meghd00t.zip
Previous Roms:
http://goo.im/devs/meghd00t/sgt7/sgt7-10.1-20130224-0601-acclaim-meghd00t.zip
http://goo.im/devs/meghd00t/sgt7/sgt7-10.1-20130131-0219-acclaim-meghd00t.zip
Gapps:
http://goo.im/gapps/gapps-jb-20130301-signed.zip
New recoveries with sgdisk tool implemented:
TWRP V2.4.0
http://celticstorage.co.uk/cm10/TWRP_v2.4.0_sgdisk_emmc.zip
CWM V6.2.7
http://celticstorage.co.uk/cm10/CWM_v6.2.7_sgdisk_emmc.zip
Rom+Gapps+Recovery flash Instructions:
1.Copy rom(zip) file and gapps (zip) and twrp/cwm recovery package onto internal/external sdcard
2.Reboot Nook Tablet and access Recovery.
3.Flash recovery package(optional) then Select from recovery to reboot to recovery once more so you flash rom and gapps with updated recovery!
4.Factory wipe, wipe cache.
5.Flash Rom then flash Gapps.
6.Select from recovery to reboot Nook Tablet
As always,
Enjoy your Nook
Known Issues:
After 4 touches, touch driver freaks out
Epic Citadel ( Unreal Engine 3) FC on touch.
Notified Mik_os about them (something went wrong from 4.1.2 ->4.2.2)hopefully we will see them squashed when and if he finds time....
Reserved for happyness. Thank you sooo much!
Thank you! im downloading right now :fingers-crossed:
Thanks Demetris.
Couple of 1st impressions:
1) The ROM seems to have reversed the mounting for internal (emmc) and external sd cards. Is this by design or is it a bug?
2) I really liked the large status bar icons in your CM10 rom as they are easier on the eyes. Is there any way to make the icons (clock, battery, etc) larger in this rom?
larrycl said:
1) The ROM seems to have reversed the mounting for internal (emmc) and external sd cards. Is this by design or is it a bug?
Click to expand...
Click to collapse
Agreed - same thing happens with my install of it.
The ROM seems to have reversed the mounting for internal (emmc) and external sd cards. Is this by design or is it a bug?
Click to expand...
Click to collapse
All data is defaulted to internal sdcard by design and imo this is the correct way and if you search around you will find that when otherway around when there isnt one ext-sdcard in the nook the mounting has bugs.
How to add and remove tablet quick setting, I can't find the option for it, the rom only allow me edit the default JB tiles and layouts
Because the sdcard was mounted as internal storage, so all data and installed apps will disappeared. How to reversed it without reinstall again.
I currently have your other ROM installed (SGT7+CM10+Cherry Picks), can I update to this new one without a full wipe? And also will the sdcard switched to internal storage mess up the currently installed apps like the previous posters have mentioned?
Trism said:
I currently have your other ROM installed (SGT7+CM10+Cherry Picks), can I update to this new one without a full wipe? And also will the sdcard switched to internal storage mess up the currently installed apps like the previous posters have mentioned?
Click to expand...
Click to collapse
1.No
2.Yes
How to enable ADB debug? Can't find the option.
qingz said:
How to enable ADB debug? Can't find the option.
Click to expand...
Click to collapse
Go to Settings... About Phone... Click on the "Build Number" item 7 times to enable the Development Settings option.
Re: [ROM]{WIP} SGT7+CM10.1+Cherry Picks,By meghd00t. 31/01/13
It is under development options, which may not be enabled.
To enable it go to about tablet and tap build number 7 times (from memory) I think.
It has been hidden by default for some reason.
Sent from my NookTablet using xda premium
I'm having deep sleep / battery problems with this rom.
I turn off the wifi at night before going to bed. Even with wifi off, it drained substantially overnight.
c600g said:
Go to Settings... About Phone... Click on the "Build Number" item 7 times to enable the Development Settings option.
Click to expand...
Click to collapse
rorymc928 said:
It is under development options, which may not be enabled.
To enable it go to about tablet and tap build number 7 times (from memory) I think.
It has been hidden by default for some reason.
Sent from my NookTablet using xda premium
Click to expand...
Click to collapse
That's tricky!
Thanks!
The EMMC/SD swap has made it so that games and other things that require the SD space will not install.
EDIT: Yeah, the apps themselves will install to "internal", but wish to store their massive obb data on the SD card which now only reads as 1GB.
flippage said:
The EMMC/SD swap has made it so that games and other things that require the SD space will not install.
EDIT: Yeah, the apps themselves will install to "internal", but wish to store their massive obb data on the SD card which now only reads as 1GB.
Click to expand...
Click to collapse
You obviously need to repartition your nook.
Runs beautifully for me. Just to let you know, if you drain it to 0 and it turns off, and your nook cable has broken (as they easily do), it will take ALL NIGHT for it to turn back on with trickle charge. I plugged it into a cell phone charger, which didn't work at all, but then used a cable for external 2.5" hard drives, the type that has two usb plugs, one for power and the other for power and data, and left it overnight.
THAT worked. Just sayin'
But this seems to be the case with the slow charging (whether Nook cable or regular usb) with ALL of the 4.2 roms that I have tried (even 4.1). Oh well. Not a problem for me, but just in case someone else has that problem.
On the other hand, I have not used a rom on the nook yet which I like better or has been more stable for me than this one. Good job demetris!
demetris_I said:
You obviously need to repartition your nook.
Click to expand...
Click to collapse
Sorry, it wasn't as obvious to me because it was never an issue with any other rom that was ever released. ever. Thanks for your help. I do enjoy your mods and the time you put into it.
Far and away my favorite ROM. There's nothing out there that's as stable for me as the SGT/Cherry Pick ROM.
Re: [ROM]{WIP} SGT7+CM10.1+Cherry Picks,By meghd00t. 31/01/13
Meghd00t- will you be updating based on kuzmas 2/06 release? I ask because I saw you released a kernel in that thread, and I was wondering if it should be flashed over this ROM, etc. I prefer to stay with your versions as they are always speedier for me. I have noticed, I am again experiencing that when plugging in to charge, I have to turn on the screen until it says or shows charging, though this is a very minor issue. Thanks again!
Sent from my NookTablet using xda app-developers app
YOU WILL NEED:
The B2G nandroid
Siyah JB
The b2g_i777_keyfix.zip file attached below (created/modded by myself)
1. Hook up your i777 to your PC and put it into USB storage mode (if it doesn't do that automatically)
2. un-7zip the B2G nandroid and place the b2g-0602 folder in the /clockworkmod/backup/ folder on your external SD (create the backup folder if necessary)
3. Place the two zips at the root of your SD card for easiness later on
4. Boot to CWM and install the Siyah Kernel JB zip
5. Reboot recovery
6. Follow the steps in the thread with the B2G nandroid download, although they may not work for you.
6(a). If those steps do not work, attempt to clone your current ROM to the second ROM under dual booting options OR create a nandroid backup of your current ROM (so you can easily go back to it)
6(b). After that, restore nandroid b2g-0602 from backup (this will wipe the first ROM so be careful)
7. Reboot recovery
8. flash b2g_i777_keyfix.zip to make the volume rocker work as the home key (as the capacitive keys do not work as is)
Q&A
HOW WILL I CHANGE MY VOLUME LEVELS?
You can change your volume levels from settings
IS THIS NICE AND PERFECT?
Nope, not at all. If anything this is a step down from Android currently. The DPI is screwed up, navigation is odd because of inability to use capacitive keys, lack of Google sync, and this overall isn't a daily driver.
SO WHY WOULD I WANT TO USE THIS?
I don't know? Why don't you tell me?
WHAT DOESN'T WORK?
Everything that is listed as not working in the i9100 thread, calls probably don't work, camera doesn't work, and probably many other things
WHAT DOES WORK?
SMS for sure works, WIFI works, data might work
SPECIAL THANKS TO EVERYONE WHO HAS WORKED ON PORTING THIS OPERATING SYSTEM TO THE I9100!
Why not reserve a post for stuff and things.
Screenshots can be found here!
Please read this! I would not recommend flashing anything not meant for our device in heimdall or Odin. Please stick to the nandroid, where you can easily go back to recovery.
Click to expand...
Click to collapse
You should add screen shots thanks for posting this, I'll try it.
Phalanx7621 said:
You should add screen shots thanks for posting this, I'll try it.
Click to expand...
Click to collapse
Sadly I do not know how to take screenshots in Firefox OS! I can, however, link to a thread with screenshots of Firefox OS at a similar DPI and whatnot... thanks for the suggestion!
Yeah, it's pretty interesting to say the least. Not good enough to be a daily driver (or even close), but it still works okay (no random reboots, etc.)
where is the download for this os? like the os download itself? is it on the website?
yj121 said:
where is the download for this os? like the os download itself? is it on the website?
Click to expand...
Click to collapse
Well on the website there are build instructions for this, but really no downloads (unless you count what I believe is a desktop VM image).
Basically Mozilla uses Github and lets you pull things from their Github (via terminal) to build for your desired device.
estabien said:
Well on the website there are build instructions for this, but really no downloads (unless you count what I believe is a desktop VM image).
Basically Mozilla uses Github and lets you pull things from their Github (via terminal) to build for your desired device.
Click to expand...
Click to collapse
That's sounds very alpha to me.
I'm really curious about it but I think I'll wait till It gets beta looks.
Sent from my SGH-I777 using xda app-developers app
RatusNatus said:
That's sounds very alpha to me.
I'm really curious about it but I think I'll wait till It gets beta looks.
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
I agree. Very very alpha. I am unable to build anything lol. Maybe someone can build just an alpha to mess around with?
Could someone try to build from source?I tried several times but i keep gitting errors when config starts.
Anyone still interested in this?
Sent from my MB886 using xda app-developers app
I'm still interested in Firefox os!
Sent from my SGH-I777 using xda app-developers app
I'm trying to build from source now but keep getting errors.
Sent from my MB886 using xda app-developers app
wildchild048 said:
I'm trying to build from source now but keep getting errors.
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
What errors are you getting?
How can i update this rom? I Have an updated system.tar and a updated user.tar that has mic and other things fixed but not sure how to get them to work.
no one is building this port ?? i thought i could try and have dual boot on the phone and show off to people ....
any one ??
ViperDNA ROM Discussion & Support Thread​
Due to the popularity of the ViperDNA rom, and wanting to better assist the users, we are opening this thread to allow for non development related questions and discussion, support questions, advice, help and how to, all that good stuff.
I am not the developer of ViperDNA, I'm simply maintaining this thread so that the main developer is not overwhelmed with too much general discussion and not able to focus on the development aspect of the rom. Many of you know me, my niche has been and will continue to be trouble shooting, support, and helping new users get started in the custom world of Android.
In the thread, you can post questions about installations, discussions of potential bugs as well as user errors, and general Q&A related to the ViperDNA ROM. I will be updating this OP to look much better, and will also be adding sections and subsections with important links.
I urge all of our users to participate and help out with this thread, this is a community effort not just me alone.
ViperDNA 1.2.0 Info
ROM NEEDS A CLEAN INSTALL
Instructions for Clean Install.
Note S On users will want a copy of rom zip on their computer desktop and a copy on the DNA's sdcard, s off only needs the rom zip file on the sdcard
1. Make a Nandroid backup just in case
2. Reboot to Recovery
3. Wipe these INSIDE recovery: Factory Reset, System, Dalvic cache
4. Choose the flash zip menu and select zip file from the sdcard and install the rom
5. S-Off users say yes to the reboot after installation is complete.
*5b. S-On Users will need to extract the rom zip file in a desktop folder and find the file boot.img and copy to their working adb/fastboot folder (For me it would be C:/Android-sdk/Platform-tools)
*5c. Right click while holding shift, in a blank space in the folders where fastboot.exe is located and choose "open command window here" from the right click menu
Run the command "fastboot flash boot boot.img" without the quotes and press enter when its done type "fastboot reboot" without quotes and press enter.
That's It, Setup is Complete
Note: Factory Reset in recovery means wiping the data partition except for media (internal storage, or sdcard) and wiping cache.
Radio and Firmware Information: You do not have to be on the latest firmware (2.04) to flash Viper 1.2.0. I recommend that you achieve s off and try the 2.0.4 radios if battery life is a concern especially because one will work better for your unique phone's hardware and network, signal strength and usage pattern.
Kernel: ONLY RUN THE KERNEL THAT'S INSTALLED IN THE ROM. Zone also has a stock 2.04 kernel posted in the android development section.
Do NOT run custom kernels with this rom until custom 2.04 kernels available, which will be after HTC releases the kernel source.
1.2.0 Important Tips
For instant help you can use the IRC Channel: http://chat.andirc.net:8080/?channels=#droid-dna
Just click on Docnok63 and select PM
For Google maps to work you need to open settings/location and check to enable the new Google location settings. There's now four options instead of three.
Another one for Install Instructions
Nice Charlie :good:
Count me in ! (for assisting with questions)
Re: [INFO][FAQ]ViperDNA ROM Discussion
I have two questions. How can I add more apps on the home screans. And is there anyway to change up the app drawer. I prefer scrolling vertically rather then horizontal. Everything is running perfectly just looking to tweak things a little.
Re: [INFO][FAQ]ViperDNA ROM Discussion
I'm not sure if this is the rom or the app but when I plug in my otg usb into my phone SwiftKey constantly shows crash error reports... I'm not sure if you guys have seen this before or not... It does not effect moving files or anything it is just weird...
Re: [INFO][FAQ]ViperDNA ROM Discussion
krazya said:
I have two questions. How can I add more apps on the home screans. And is there anyway to change up the app drawer. I prefer scrolling vertically rather then horizontal. Everything is running perfectly just looking to tweak things a little.
Click to expand...
Click to collapse
Long press the app in the app drawer and move it to the home screen.
Install a different launcher, I highly recommend nova, apex is another good one
Sent from my HTC6435LVW using xda app-developers app
---------- Post added at 09:08 PM ---------- Previous post was at 09:07 PM ----------
danielhall2689 said:
I'm not sure if this is the rom or the app but when I plug in my otg usb into my phone SwiftKey constantly shows crash error reports... I'm not sure if you guys have seen this before or not... It does not effect moving files or anything it is just weird...
Click to expand...
Click to collapse
I have some similar issues too, but not until after I unmount the drive.
Sent from my HTC6435LVW using xda app-developers app
Re: [INFO][FAQ]ViperDNA ROM Discussion
Exactly what I was looking for thank you! Switched to apex and will have to tweak it until its just right.
danielhall2689 said:
I'm not sure if this is the rom or the app but when I plug in my otg usb into my phone SwiftKey constantly shows crash error reports... I'm not sure if you guys have seen this before or not... It does not effect moving files or anything it is just weird...
Click to expand...
Click to collapse
The error reports on mine come after un-mounting. I am not sure yet as to the cause. I had the same issue prior to rooting
Re: [INFO][FAQ]ViperDNA ROM Discussion
RLGL said:
The error reports on mine come after un-mounting. I am not sure yet as to the cause. I had the same issue prior to rooting
Click to expand...
Click to collapse
Im having the same problem and after some research it looks like people are having the same issues on stock and custom roms.
I'm using stickmount pro. What I've found is that after unmounting or removing the device a reboot is required because my apps go haywire. The only time I've seen similar issues is when people use something like apps2sd and their phone boots before the sdcard is mounted, so the shortcuts on the homescreen or widgets disappear and the app force closes all over the place and disappears from the app drawer.
Obviously the problem with us is not because the apps are installed on an external directory, but the symptoms are very similar.
I will be doing more research and its going to be a focus of mine. I'll keep you guys and gals updated and would love to hear any input or see links that you run across involving DNA and OTG.
Something else with OTG is that when I unmount the USB drive in stickmount, and then I unplug the drive, I get the warning message about the drive being removed while in use or something like that. So its almost like stickmount isn't unmounting, it just thinks its unmounting, and that improper unmounting is what sends the directories haywire.
Sent from my HTC6435LVW using Xparent Red Tapatalk 2
Re: [INFO][FAQ]ViperDNA ROM Discussion
RLGL said:
The error reports on mine come after un-mounting. I am not sure yet as to the cause. I had the same issue prior to rooting
Click to expand...
Click to collapse
I get an error on connecting otg about not being a valid charging source. On disconnect, several processes crash, which trace to specific apps, including Battery Monitor Widget Pro, Pure Messenger and Gmail Label Notifier. If I disable those apps, then no crash, so I'm pretty sure this is not ROM related.
Sent from my HTC6435LVW using Tapatalk 2
Re: [INFO][FAQ]ViperDNA ROM Discussion
danielhall2689 said:
I'm not sure if this is the rom or the app but when I plug in my otg usb into my phone SwiftKey constantly shows crash error reports... I'm not sure if you guys have seen this before or not... It does not effect moving files or anything it is just weird...
Click to expand...
Click to collapse
Interesting indeed... I've also had this same issue with the SwiftKey error while utilizing otg. Thanks for looking into this Charlie.
Sent from a Venomous DNA via Southwest desert frequencies
Used the search in the other thread but didn't quite find the answer I was looking for.
Do I start with 1.1.0 and then use the OTA to update to 1.1.3? Should I just wait till 1.2 comes out and then flash, if it makes any difference?
UrGuardian999 said:
Used the search in the other thread but didn't quite find the answer I was looking for.
Do I start with 1.1.0 and then use the OTA to update to 1.1.3? Should I just wait till 1.2 comes out and then flash, if it makes any difference?
Click to expand...
Click to collapse
Download 1.1.0 from the original page.
Download this zip file to PREVENT the VERIZON ota. http://forum.xda-developers.com/showthread.php?t=2149417
Install 1.1.0. reboot.
IMMEDIATELY after it boots reboot into recovery and install the zip file above.
then boot and let venom take you through all 3 updates on it's own.
Droidem said:
Download 1.1.0 from the original page.
Download this zip file to PREVENT the VERIZON ota. http://forum.xda-developers.com/showthread.php?t=2149417
Install 1.1.0. reboot.
IMMEDIATELY after it boots reboot into recovery and install the zip file above.
then boot and let venom take you through all 3 updates on it's own.
Click to expand...
Click to collapse
If I'm on wi-fi only and will be on wi-fi only for a few months, do I have to worry about the disable ota verizon part? Just curious really, sounds easy enough
Re: [INFO][FAQ]ViperDNA ROM Discussion
UrGuardian999 said:
If I'm on wi-fi only and will be on wi-fi only for a few months, do I have to worry about the disable ota verizon part? Just curious really, sounds easy enough
Click to expand...
Click to collapse
You really don't have to worry about it. Worse thing that would happen is that it auto downloads, it can't install on a custom recovery. And 1.1.3 has the ota removed so you don't even have to worry about it installing.
Sent from my HTC6435LVW using xda app-developers app
Re: [INFO][FAQ]ViperDNA ROM Discussion
I didn't choose to apply the sense camera mod during instal. Is there a way to apply them after the fact?
Sent from my HTC6435LVW using xda app-developers app
Hey guys looking for help with Viper rom. I used fastboot to flash all the way up to version 1.1.3 and the boot img. My phone is booting properly however when I go into the hub and try to apply tweaks or download themes and such i get a blank white screen. Would someone please help me
~EDIT~
Recently I rooted and flashed CM 11. Any time I try to go and play a video, whether it's from the internal storage, sd card, or stream from a website, I just get "Can't play video."
Does anyone know of any reasons why this would be happening and how how to fix it? Or any suggestions? Should I reflash?
Also, usually when you hold down the Droid Home button you get a list of all recent apps as well as a link to the Task Manager at the bottom. There is no such link now though. Is this an Android Kitkat thing or a CM thing? How do I get to the Task Manager?
varxtis said:
...
There seem to be pretty significant shortcuts/features missing and I can't tell if thats because it's kitkat, or because it's CM.
Example:
1.) Sound - ~EDIT~ Found "Sound" button. Wishing it had "vibrate" mode but at least now I can Toggle normal/mute.
2.) Brightness - On this one, there is a Button that takes you to a brightness bar, which is fine... but it won't let me select "Auto". It seems more like a glitch than anything when I tap it.
...
Click to expand...
Click to collapse
The NT hardware does not have vibration or light sensor capabilities.
digixmax said:
The NT hardware does not have vibration or light sensor capabilities.
Click to expand...
Click to collapse
Thank you ^_^ Fair enough, She can definitely live without them.
Now its just a matter of understanding why videos can't be played. It wouldn't have anything to do with which gApps I used would it?
varxtis said:
Thank you ^_^ Fair enough, She can definitely live without them.
Now its just a matter of understanding why videos can't be played. It wouldn't have anything to do with which gApps I used would it?
Click to expand...
Click to collapse
Videos cannot be played because of a kernel bug. The CM11 Official Nightlies have this issue fixed.
If you are running the official CM11 nightlies, what build number is it? Could be a regression.
I apologize,
Ive been checking for updates periodically, but Im not very familiar with what nightlies are. I figure these are updates/patches that are done on a nightly bases.
Right now my CyanogenMod Version is
11-20131220-UNOFFICIAL-acclaim
Build Number:
cm_acclaim-userdebug 4.4.2 KOT49H e9e3ba9b67 test-keys
Thanks to your post, I went ahead into "About Tablet" and then into CyanogenMod Updates to take a closer look. Since flashing CM11 Ive only been checking "New Versions (Stable only)", but I didn't even realize you can change which updates you can search for... so again I thanks to your suggestion I changed it to "Update types: New Versions (incl, Nightlies)"
Three options became available... so I downloaded cm-11-20140218-NIGHTLY.
Should I install?
I'd suggest trying the M3 snapshot: cm-11-20140210-SNAPSHOT-M3-acclaim.zip (http://download.cyanogenmod.org/get/jenkins/58498/cm-11-20140210-SNAPSHOT-M3-acclaim.zip).
Awesome,
As always, thank you very much
Now, Is that something I could just download and run straight from the tablet main UI? Or would I download it, put into same bootSD card I used to flash CM, reboot nook into recovery and then flash the snapshot zip? Either way isfine, just want to know which way to go.
varxtis said:
Awesome,
As always, thank you very much
Now, Is that something I could just download and run straight from the tablet main UI? Or would I download it, put into same bootSD card I used to flash CM, reboot nook into recovery and then flash the snapshot zip? Either way isfine, just want to know which way to go.
Click to expand...
Click to collapse
You have to flash the zip via recovery (either TWRP or CWM, depends on what you have installed).
Make sure to do these things while in recovery, before flashing the zip. Do *not* touch /rom, /factory, /recovery:
1. wipe cache partition;
2. wipe dalvik-cache;
3. wipe data partition;
4. wipe system partition;
5. NOW you can flash the zip.