i777 aberration - AT&T Samsung Galaxy S II SGH-I777

Hello everyone,
I hope someone can help me, I just bought an i777 kk6 at&t.
I check this thread about aberration for i777 and I was wondering if I could get any help installing it into mine i777.
Aberration i777
Should I root my i777 first?
I tried to do it, but I had an error with my wifi so I unroot the phone, after that I search all over the internet to find out on how to root an i777 kk6, but I did not find any good information on how to do it (I am new with this but I swear I search a lot specially in this forum the past 3 days)
So if you can please let me know about any threads where I can find any information on how to root the phone and then install aberration that will be great.
In advanced thank you very much for your help and sorry for my lousy english.
Javier

bigote said:
Hello everyone,
I hope someone can help me, I just bought an i777 kk6 at&t.
I check this thread about aberration for i777 and I was wondering if I could get any help installing it into mine i777.
Aberration i777
Should I root my i777 first?
I tried to do it, but I had an error with my wifi so I unroot the phone, after that I search all over the internet to find out on how to root an i777 kk6, but I did not find any good information on how to do it (I am new with this but I swear I search a lot specially in this forum the past 3 days)
So if you can please let me know about any threads where I can find any information on how to root the phone and then install aberration that will be great.
In advanced thank you very much for your help and sorry for my lousy english.
Javier
Click to expand...
Click to collapse
OK one piece of advice. Stay on xda from now on, that WiFi issue u had sounded like u went to galaxys2root.com which is no bueno. Check out the stickies on how to root and install ROMs. You need to read and understand what u are doing before u do anything else to ur phone
Sent from Team Pirate

brandonarev said:
OK one piece of advice. Stay on xda from now on, that WiFi issue u had sounded like u went to galaxys2root.com which is no bueno. Check out the stickies on how to root and install ROMs. You need to read and understand what u are doing before u do anything else to ur phone
Sent from Team Pirate
Click to expand...
Click to collapse
Thank you very much for the advice, yes I did it , and I saw that there were some other users with the same issue.
I swear I will not step a foot on that webpage anymore.
I am reading a lot and trying to understand, maybe I will have to read a lot more.
Can you recomend anything I can read to start?

bigote said:
Thank you very much for the advice, yes I did it , and I saw that there were some other users with the same issue.
I swear I will not step a foot on that webpage anymore.
I am reading a lot and trying to understand, maybe I will have to read a lot more.
Can you recomend anything I can read to start?
Click to expand...
Click to collapse
As usual, READ the stickies
Here: http://forum.xda-developers.com/showthread.php?t=1511906
then search in here: http://forum.xda-developers.com/forumdisplay.php?f=1304

bigote said:
Thank you very much for the advice, yes I did it , and I saw that there were some other users with the same issue.
I swear I will not step a foot on that webpage anymore.
I am reading a lot and trying to understand, maybe I will have to read a lot more.
Can you recomend anything I can read to start?
Click to expand...
Click to collapse
Also don't forget to hit the thanks button to anyone who has helped u like votinh
Sent from Team Pirate

Creepys guide for the i777 is my favorite. Had me rooted and flashing a custom ROM the first day I owned it. Like everyone else said though read and if you still need help PM me.
Sent from my SGH-I777 using xda app-developers app

votinh said:
As usual, READ the stickies
Here: http://forum.xda-developers.com/showthread.php?t=1511906
then search in here: http://forum.xda-developers.com/forumdisplay.php?f=1304
Click to expand...
Click to collapse
Thanks man for the information
I just checked on the first link http://forum.xda-developers.com/showthread.php?t=1511906 and they have a walkthough guid to root i777, but it does not work for i777 kk6

wewe

bigote said:
Thanks man for the information
I just checked on the first link http://forum.xda-developers.com/showthread.php?t=1511906 and they have a walkthough guid to root i777, but it does not work for i777 kk6
Click to expand...
Click to collapse
It says it doesn't work if ur on 2.3.6. Is that the case are u on that version of gb? If not I believe u can flash 2.3.4 and just go from there please correct me if I'm wrong anykne
Sent from Team Pirate

bigote said:
Thanks man for the information
I just checked on the first link http://forum.xda-developers.com/showthread.php?t=1511906 and they have a walkthough guid to root i777, but it does not work for i777 kk6
Click to expand...
Click to collapse
Use [GUIDE] How to Flash Custom Binaries Without Ever Incrementing the Flash Counter!! 2c if your on KK6

bigote said:
Thanks man for the information
I just checked on the first link http://forum.xda-developers.com/showthread.php?t=1511906 and they have a walkthough guid to root i777, but it does not work for i777 kk6
Click to expand...
Click to collapse
Why doesn't work on KK6?
There are 4 options listed, choose one that suitable for you and your device.

votinh said:
Why doesn't work on KK6?
There are 4 options listed, choose one that suitable for you and your device.
Click to expand...
Click to collapse
Oh, now I see it now, sorry and thanks again

Also one more question.
I want to know if anybody can help me with this, I see that a lot of people has Siyah Kernel.
are the kernels from this site made for i777 kk6?
http://www.gokhanmoral.com/

bigote said:
Also one more question.
I want to know if anybody can help me with this, I see that a lot of people has Siyah Kernel.
are the kernels from this site made for i777 kk6?
http://www.gokhanmoral.com/
Click to expand...
Click to collapse
No. Those would be for the GT-I9100 I believe. The kernels for the I777 will all be available in this forum, in the development section. You must use a Gingerbread kernel with a Gingerbread system, so when you are rooting with UCKH7, the two main custom kernels are linked in the guide. That would be Siyah, and Entropy512's daily driver. Either one will work fine to get you ClockworkMod Recovery. You'll probably be flashing a different kernel when you put on a new firmware anyway.

bigote said:
Also one more question.
I want to know if anybody can help me with this, I see that a lot of people has Siyah Kernel.
are the kernels from this site made for i777 kk6?
http://www.gokhanmoral.com/
Click to expand...
Click to collapse
Use the Siyah kernel from here:
http://forum.xda-developers.com/showthread.php?t=1592228
It is the same kernel from the website you found, but adapted specifically for the I-777. There are two versions. For aberration i believe you need to install the version WITH micswap, but check the threads to make sure. If you are using it with another ROM, check the first post from the thread above, they list which versions you need for different roms.
One caution: some people have reported problems when installing v4 of the kernel immediately after flashing a new ROM. To avoid problems, Flash your rom, reboot the phone fully, then go back into CWM recovery and flash your kernel. Or, if you are not flashing a jellybean rom, you can just use version 3 of ktoonsez kernel instead of the version 4 beta, and avoid the problem altogether.
Edit: oops...seems creepy beat me to it. Just do whatever he said, he is one of the most knowledgeable people here

wgoldfarb said:
Use the Siyah kernel from here:
http://forum.xda-developers.com/showthread.php?t=1592228
It is the same kernel from the website you found, but adapted specifically for the I-777. There are two versions. For aberration i believe you need to install the version WITH micswap, but check the threads to make sure. If you are using it with another ROM, check the first post from the thread above, they list which versions you need for different roms.
One caution: some people have reported problems when installing v4 of the kernel immediately after flashing a new ROM. To avoid problems, Flash your rom, reboot the phone fully, then go back into CWM recovery and flash your kernel. Or, if you are not flashing a jellybean rom, you can just use version 3 of ktoonsez kernel instead of the version 4 beta, and avoid the problem altogether.
Click to expand...
Click to collapse
@bigote,
Maybe I misinterpreted your question, and wgoldfarb has it right, but just to be clear...
If you are rooting the phone with UCKH7 plus root from my guide, you will need to install a Gingerbread custom kernel to get ClockworkMod Recovery so that you can flash Aberration. In that case, DO NOT use this kernel since it is for ICS and will not boot when flashed with a UCKH7 system. Read and follow my previous post.
Once you have Aberration installed, then you can upgrade the kernel to the latest Siyah ICS kernel from this link.

creepyncrawly said:
@bigote,
Maybe I misinterpreted your question, and wgoldfarb has it right, but just to be clear...
If you are rooting the phone with UCKH7 plus root from my guide, you will need to install a Gingerbread custom kernel to get ClockworkMod Recovery so that you can flash Aberration. In that case, DO NOT use this kernel since it is for ICS and will not boot when flashed with a UCKH7 system. Read and follow my previous post.
Once you have Aberration installed, then you can upgrade the kernel to the latest Siyah ICS kernel from this link.
Click to expand...
Click to collapse
Sorry, when i replied i had not yet seen creepy's post. As i said above, just follow what he said. To clarify my answer, i was assuming you were planning on rooting your phone following creepy's instructions, then install aberration, and THEN flash Siyah to use with aberration. In any case, if you are ever in doubt, you can never go wrong with creepy's answers.

wgoldfarb said:
In any case, if you are ever in doubt, you can never go wrong with creepy's answers.
Click to expand...
Click to collapse
+1

creepyncrawly said:
@bigote,
Maybe I misinterpreted your question, and wgoldfarb has it right, but just to be clear...
If you are rooting the phone with UCKH7 plus root from my guide, you will need to install a Gingerbread custom kernel to get ClockworkMod Recovery so that you can flash Aberration. In that case, DO NOT use this kernel since it is for ICS and will not boot when flashed with a UCKH7 system. Read and follow my previous post.
Once you have Aberration installed, then you can upgrade the kernel to the latest Siyah ICS kernel from this link.
Click to expand...
Click to collapse
wgoldfarb said:
Sorry, when i replied i had not yet seen creepy's post. As i said above, just follow what he said. To clarify my answer, i was assuming you were planning on rooting your phone following creepy's instructions, then install aberration, and THEN flash Siyah to use with aberration. In any case, if you are ever in doubt, you can never go wrong with creepy's answers.
Click to expand...
Click to collapse
Ok to be clear, I tried to root my phone, I did it actually from the galaxy2root.com, my wifi did not work and I "went back" to stock
now I have GB 2.3.4 (as always)
I777UCKK6
kernel version
2.6.35.7
GINGERBREAD.UCKH7
Now If I want to install aberration I should do it from here and then root the phone with Siyah?
aberration i777

bigote said:
Ok to be clear, I tried to root my phone, I did it actually from the galaxy2root.com, my wifi did not work and I "went back" to stock
now I have GB 2.3.4 (as always)
I777UCKK6
kernel version
2.6.35.7
GINGERBREAD.UCKH7
Now If I want to install aberration I should do it from here and then root the phone with Siyah?
aberration i777
Click to expand...
Click to collapse
Since ur on 2.3.4 u could use any rooting method the thread said it won't work with kk6 2.3.6
Sent from Team Pirate

Related

Can someone show me how to flash a kernel?

Going to flash S8 from stock, but I have no idea how to flash the kernel first.
Here's the link to the kernel thread:
http://forum.xda-developers.com/show....php?t=1289460
I don't even know which link is the kernel itself, so I figure I better ask for help.
http://forum.xda-developers.com/showthread.php?t=1281779
Thread moved from the Dev section to Q&A section.
My advice to the OP is that if you dont know how to flash, then dont. Read up first, and there is a lot to read... but its all good information on how to NOT mess up your device.
Also, if you want to flash S8, check out his site and his thread. Mikey steers his users in the right direction and makes a great rom.
Pirateghost said:
http://forum.xda-developers.com/showthread.php?t=1281779
Click to expand...
Click to collapse
thanks for taking your time to do something helpful
Red5 said:
Thread moved from the Dev section to Q&A section.
My advice to the OP is that if you dont know how to flash, then dont. Read up first, and there is a lot to read... but its all good information on how to NOT mess up your device.
Also, if you want to flash S8, check out his site and his thread. Mikey steers his users in the right direction and makes a great rom.
Click to expand...
Click to collapse
I am using Mikey's instructions...I've flashed SVII before, but it didn't require flashing a kernel. I just want to make sure I do it right, but so far have not gotten an answer to this rather simple question. If anyone feels like spilling the beans before I just have to google it and go with some random's method, I'd like it alot.
Damani311 said:
thanks for taking your time to do something helpful
Click to expand...
Click to collapse
Also. There is a FAQ thread that pretty much explains how to flash a kernel using Odin.
No extra thread needed.
Sent from my SAMSUNG-SGH-I777
Pirateghost said:
Also. There is a FAQ thread that pretty much explains how to flash a kernel using Odin.
No extra thread needed.
Sent from my SAMSUNG-SGH-I777
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1309346
its that link...
says that kernel is not for battery life though, and links you to Entropy's kernel...but on his thread I don't know which one of the 10+ links are the actual kernel DL link, really appreciate it if you could tell me which one it is
Damani311 said:
http://forum.xda-developers.com/showthread.php?t=1309346
its that link...
says that kernel is not for battery life though, and links you to Entropy's kernel...but on his thread I don't know which one of the 10+ links are the actual kernel DL link, really appreciate it if you could tell me which one it is
Click to expand...
Click to collapse
entropy's post has several to choose from. they are all dated. the dates are the versioning (if you will)
how hard is it to click on one and download it? maybe the most recent one?
also, Entropy's kernels in that thread are for CWM, flashable just like any other CWM zip file
perhaps you need to read the FAQ thread and the HOW TO ROOT thread. this basic stuff is explained very well.
Latest Entropy kernel is DD_11132011.zip For future reference, the file names are based on the release date.
Lawrence of a Labia said:
Latest Entropy kernel is DD_11132011.zip For future reference, the file names are based on the release date.
Click to expand...
Click to collapse
ok I DL'ed that zip file, and tried to flash w/ odin but it doesnt list it as a valid .tar file, and won't let me see it in the list of files I can choose from to flash
downloaded cwm, and flashed it with odin (the exact way I tried to flash the kernel, but this one actually shows up for use)
cwm is installed, moved the .zip to SD and installed with cwm, and nothing. Phone is not rooted and completely the same as before the install...
Not sure what to do at this point.....why didn't the kernel flash?
Should I just go ahead and try to flash the ROM?
Damani311 said:
ok I DL'ed that zip file, and tried to flash w/ odin but it doesnt list it as a valid .tar file, and won't let me see it in the list of files I can choose from to flash
downloaded cwm, and flashed it with odin (the exact way I tried to flash the kernel, but this one actually shows up for use)
cwm is installed, moved the .zip to SD and installed with cwm, and nothing. Phone is not rooted and completely the same as before the install...
Not sure what to do at this point.....why didn't the kernel flash?
Should I just go ahead and try to flash the ROM?
Click to expand...
Click to collapse
what exactly did you expect to happen??
flashing kernel =/= rooting your phone.....
i am completely confused as to why you dont read the FAQs i have repeatedly pointed you to?? they arent there for forum fluff, they serve a freakin purpose!
since its obvious you dont want to go look for yourself, here are the links:
**AT&T SGS2 Frequently Asked Questions(FAQS)**
[How To] Easily Root your SGS2
Pirateghost said:
what exactly did you expect to happen??
flashing kernel =/= rooting your phone.....
i am completely confused as to why you dont read the FAQs i have repeatedly pointed you to?? they arent there for forum fluff, they serve a freakin purpose!
since its obvious you dont want to go look for yourself, here are the links:
**AT&T SGS2 Frequently Asked Questions(FAQS)**
[How To] Easily Root your SGS2
Click to expand...
Click to collapse
Installation
From Stock:
1. Install Entropy512's kernel, found here.
2. Entropy512's kernel will give you root and CWM. Download Titanium Backup from the Market, and after allowing root permissions, back up your apps.
Durr me no speakee english
But I flashed the ROM with CWM anyway, and it worked. The phone is blazingly clean and fast and battery life has dramatically improved. Thanks everyone!

Anyone been able to root the UCLC2 leak?

So.. forgive my ignorance, but I installed the leaked update for the skyrocket last night and was able to just flash a cwm tar with only recovery in it and then superuser to root. I take it thats impossible with the i777?
sulpher said:
So.. forgive my ignorance, but I installed the leaked update for the skyrocket last night and was able to just flash a cwm tar with only recovery in it and then superuser to root. I take it thats impossible with the i777?
Click to expand...
Click to collapse
Give it a little time. Should be soon.
It hasn't been posted, but it has been.
No not me, I am sticking with my base, too lazy to restart and haven't found a reason why to change.
Hmm worked for the skyrocket ics leak... cant be including a GB kernel with it or id bootloop? And skyrocket has no cwm with ics kernel...
sulpher said:
Hmm worked for the skyrocket ics leak... cant be including a GB kernel with it or id bootloop? And skyrocket has no cwm with ics kernel...
Click to expand...
Click to collapse
skyrocket has separate recovery partition.....their CWM isnt injected into kernel....
Pirateghost said:
skyrocket has separate recovery partition.....their CWM isnt injected into kernel....
Click to expand...
Click to collapse
Ah okay, what i was wondering. Thank you.
sulpher said:
So.. forgive my ignorance, but I installed the leaked update for the skyrocket last night and was able to just flash a cwm tar with only recovery in it and then superuser to root. I take it thats impossible with the i777?
Click to expand...
Click to collapse
A few people have been able to root it with odin mobile. The question is how to get CWM recovery into that new leak.
sam1forever said:
A few people have been able to root it with odin mobile. The question is how to get CWM recovery into that new leak.
Click to expand...
Click to collapse
Install Entropy's kernel with Odin, or Mobile Odin. He's posted his updates several times, but I don't remember where I saw them. You could just extract them from one of the Samsung ICS roms around here.
EDIT: Looks like recovery isn't possible with the leak, due to Entropy getting call audio to work before the leak. You'd have to stay with the stock leak kernel, which means Odin'ing back to stock, then cwm kernel, then nandroid restore if you want to get back. You could probably use Mobile Odin to load the back-to-stock + root package, and load a CWM kernel all in one flash . See the below, quoted post from him.
Entropy512 said:
Source doesn't really matter - I9100 trees basically fully support I777 at this point, there is almost no difference. There's a good chance it'll mostly work, just like a single kernel worked for I777 and I9100 bases in the Gingerbread days.
However, call audio won't work though due to the libaudio workaround. I have no intention of turning this off or doing dual-builds with two different defconfigs for a leak. When official ICS comes around I'll look into other options.
Firmware developers could do a "reverse Hellraiser" with libaudio, but since there's no NFC I have no interest in the leak. UC bases suck - when ICS came out I was damn close to declaring UC bases supported for my Gingerbread kernel because only those on UC bases seemed to have stability problems starting with the I9100 update3 source merge (which made I9100 bases awesome.)
. . .
Click to expand...
Click to collapse
Man this sucks. I am now stuck with UCLC2. So there is no way for now that we can root this version of ICS and have a CWM?
brokebackamigo said:
Man this sucks. I am now stuck with UCLC2. So there is no way for now that we can root this version of ICS and have a CWM?
Click to expand...
Click to collapse
WOW.
So you bring up a two day old thread...then assume the information in it is current...and decide not to read ANY of the more up-to-date threads in these forums that have to do with rooted ICS? Go read.
mattdm said:
WOW.
So you bring up a two day old thread...then assume the information in it is current...and decide not to read ANY of the more up-to-date threads in these forums that have to do with rooted ICS? Go read.
Click to expand...
Click to collapse
Your comment did not really help me, but yeah I found my answer hiding in this clutter of useless comments. The answer to my question was NO.
brokebackamigo said:
Your comment did not really help me, but yeah I found my answer hiding in this clutter of useless comments. The answer to my question was NO.
Click to expand...
Click to collapse
Just odin a kernel with CWM and then flash the rom task posted. It has both root and CWM. If you read up you would know this.
brokebackamigo said:
Your comment did not really help me, but yeah I found my answer hiding in this clutter of useless comments. The answer to my question was NO.
Click to expand...
Click to collapse
Ok, if you want to have a rooted version of the UCLC2 leak, here are the steps:
1. Download Odin on your PC.
2. Use it to flash back to stock. This will reset your bootloaders to the old ones.
3. If you use the ROM in that thread, it will already have root access. Download Mobile Odin from the Market.
4. Use Mobile Odin to flash a CWM enabled kernel.
5. Use CWM Recovery to flash the rooted UCLC2 leak.
Done. All this information was already posted before you posted in this thread; all you had to do was go find it.
Thanks for the tip. I had already tried those steps. The only thing I was doing wrong was that I wasn't wiping anything before I flashed thru odin. I was stuck with the Google app framework error. Thanks again.
Cheers.
Sent from my SGH-I777 using XDA
Pirateghost said:
skyrocket has separate recovery partition.....their CWM isnt injected into kernel....
Click to expand...
Click to collapse
Thanks for that nuggit of info you just saved me some time.
Are you a Skyrocket user?
Im currently trying to service ICS leak on both varriants
Phatboyj420 said:
Thanks for that nuggit of info you just saved me some time.
Are you a Skyrocket user?
Im currently trying to service ICS leak on both varriants
Click to expand...
Click to collapse
i had a skyrocket for a bit, but found little time to maintain a rom for it, so i sold it.
brokebackamigo said:
Thanks for the tip. I had already tried those steps. The only thing I was doing wrong was that I wasn't wiping anything before I flashed thru odin. I was stuck with the Google app framework error. Thanks again.
Cheers.
Sent from my SGH-I777 using XDA
Click to expand...
Click to collapse
I have the same error when i try and flash back to stock, i cant get past the activation screen. Please help me im stuck on sgh i777 uclc2 leak and cant get off cause i dont have root.
If you follow the instructions in the back to stock thread exactly, you should be able to do it.

Phone just freezes when I root it

Hi All.
I'm relatively new to all this so go easy on me.
I've got a Samsung Galaxy S2 on T Mobile.
Model Number: GT-I9100
Android Version: 4.0.3
Baseband Version: I9100XXLPQ
Kernel Version: 3.0.1 5-i9100XXLPQ-CL223505
Build Number: IML74K.XXLPQ
I've tried to root it using a method I found on here, I think it was by chainfire, the Odin app said it was a success but when the phone reboots it just freezes and doesnt go any further.
I want to have the cyanogenmod rom on my phone with it fully rooted.
Any help would be greatly appreciated, I have searched this forum for answers but its pretty vast.
What kernel did you use to root your device?
Sent from my GT-I9100 using xda app-developers app
HANDSY said:
What kernel did you use to root your device?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
is this a kernel? if so this one
I9100XXLPQ_I9100OXALPQ_XEO
It's a ROM, we need information about kernel.
gashalasha7 said:
is this a kernel? if so this one
I9100XXLPQ_I9100OXALPQ_XEO
Click to expand...
Click to collapse
That is a full firmware, not a kernel.
You said you used something from chainfire. If you can't tell us, perhaps a link to what you used would be helpful.
ctomgee said:
That is a full firmware, not a kernel.
You said you used something from chainfire. If you can't tell us, perhaps a link to what you used would be helpful.
Click to expand...
Click to collapse
initially I think it was this
GT-I9100_UMKK1_insecure.tar
gashalasha7 said:
initially I think it was this
GT-I9100_UMKK1_insecure.tar
Click to expand...
Click to collapse
This is an insecure kernel for android build UMKK1, which is Gingerbread.
You have an XXLPQ build, which is ICS.
You need to use a kernel that is closer to your build. There is an LPQ kernel in the CF-root thread, flash that. (make sure to use the one labelled as "proper", it fixes some stuff)
ctomgee said:
This is an insecure kernel for android build UMKK1, which is Gingerbread.
You have an XXLPQ build, which is ICS.
You need to use a kernel that is closer to your build. There is an LPQ kernel in the CF-root thread, flash that. (make sure to use the one labelled as "proper", it fixes some stuff)
Click to expand...
Click to collapse
Originally my phone had Gingerbread - which is why I used that kernel. However, I then thought it had rooted. So installed ICS. Downloaded Rom manager and it tells me my phone isnt rooted.
Should I still use that one?
Do I need to do anything after that?
gashalasha7 said:
Originally my phone had Gingerbread - which is why I used that kernel. However, I then thought it had rooted. So installed ICS. Downloaded Rom manager and it tells me my phone isnt rooted.
Should I still use that one?
Do I need to do anything after that?
Click to expand...
Click to collapse
Is the information in post 1 still accurate? Is that what is CURRENTLY on your phone? Then use the LPQ "proper" kernel in that thread I linked. Instructions are in post 1 of that same thread, but the short of it is: find the kernel that matches your build, and flash with Odin. (I already told you which one) That should be all you need to do. That will show the Triangle when you boot the phone, but if you don't care about that showing, then you're done.
So you're saying your reason for using the UMKK1 Gingerbread kernel was because you were PREVIOUSLY on Gingerbread? Well, you installed ICS. Your kernel changed along with it. You'd now have to use an ICS kernel to root ICS. Make sense?
ctomgee said:
Is the information in post 1 still accurate? Is that what is CURRENTLY on your phone? Then use the LPQ "proper" kernel in that thread I linked. Instructions are in post 1 of that same thread, but the short of it is: find the kernel that matches your build, and flash with Odin. (I already told you which one) That should be all you need to do. That will show the Triangle when you boot the phone, but if you don't care about that showing, then you're done.
So you're saying your reason for using the UMKK1 Gingerbread kernel was because you were PREVIOUSLY on Gingerbread? Well, you installed ICS. Your kernel changed along with it. You'd now have to use an ICS kernel to root ICS. Make sense?
Click to expand...
Click to collapse
Yep, makes sense.
Yeah the above is what is currently on my phone.
I'll give that a go. Thanks for your help.
CTOMGEE thanked for advice given.
Sent from my GT-I9100 using xda app-developers app
ctomgee said:
Is the information in post 1 still accurate? Is that what is CURRENTLY on your phone? Then use the LPQ "proper" kernel in that thread I linked. Instructions are in post 1 of that same thread, but the short of it is: find the kernel that matches your build, and flash with Odin. (I already told you which one) That should be all you need to do. That will show the Triangle when you boot the phone, but if you don't care about that showing, then you're done.
So you're saying your reason for using the UMKK1 Gingerbread kernel was because you were PREVIOUSLY on Gingerbread? Well, you installed ICS. Your kernel changed along with it. You'd now have to use an ICS kernel to root ICS. Make sense?
Click to expand...
Click to collapse
Hi there, it rooted, so thanks for your help with that.
However, I tried installing cyanogenmod from the latest one listed in the Rom Manager. It downloaded, the phone re-booted into recovery. I deleted cache and data, then installed the zip file from sd card, however it came up that it had failed and was aborted.
So now it's rebooted and is back to 4.0.3 but with all my data gone.
Man this sucks.
Hope you can help mate
gashalasha7 said:
Hi there, it rooted, so thanks for your help with that.
However, I tried installing cyanogenmod from the latest one listed in the Rom Manager. It downloaded, the phone re-booted into recovery. I deleted cache and data, then installed the zip file from sd card, however it came up that it had failed and was aborted.
So now it's rebooted and is back to 4.0.3 but with all my data gone.
Man this sucks.
Hope you can help mate
Click to expand...
Click to collapse
I don't use CyanogenMod, but I would avoid using ROM Manager if I were you. Why don't you just follow the instructions in the CM discussion thread? And which CM are you attempting to install? CM7, or CM9? (one is Gingerbread, and the other is ICS)
BTW - you would have had to delete all data, going to either version of CM anyways, as file system is a bit different between AOSP and Samsung based firmwares.
iesroxo when
ctomgee said:
I don't use CyanogenMod, but I would avoid using ROM Manager if I were you. Why don't you just follow the instructions in the CM discussion thread? And which CM are you attempting to install? CM7, or CM9? (one is Gingerbread, and the other is ICS)
Click to expand...
Click to collapse
The newest one, I think it was CM9.
To be honest mate there's so many threads and discussions unless you have a real grasp of it its not easy
is there a way of me telling if clockworkmod recovery is installed?
gashalasha7 said:
The newest one, I think it was CM9.
To be honest mate there's so many threads and discussions unless you have a real grasp of it its not easy
Click to expand...
Click to collapse
CM9 discussion thread. Has installation instructions in post 1, which don't involve using ROM Manager at all. As I said earlier, I'd avoid using ROM Manager; it often misbehaves on this device.
Here's some advice... even though I don't use CM (7 or 9), I found that that thread in 1 second by typing "cyanogenmod9 i9100 xda discussion thread" into Google. It was the first result that came up.
I know forum search sometimes is down, but I actually prefer to use Google for my searches anyways. You can even limit searches to a specific site by including "site:" followed by whatever site you are interested in limiting your search to.
For example, if I wanted to search the xda forums for i9100 rooting techniques, I'd Google:
site:forum.xda-developers.com i9100 rooting techniques
This will return a Google search for "i9100 rooting techniques" that are within the forum.xda-developers.com domain.
Rule #1 of the forum is to search before posting anyways... I know you're new to most of this, but you'll find people will tend to either not help or will be kind of mean if you post commonly asked questions.
Hope all this helps.
---------- Post added at 12:33 PM ---------- Previous post was at 12:31 PM ----------
gashalasha7 said:
is there a way of me telling if clockworkmod recovery is installed?
Click to expand...
Click to collapse
Boot to recovery. You'll know because CWM recovery has MANY more options than stock recovery. Stock recovery you can only wipe data/factory reset, wipe cache, and wipe dalvik cache, and maybe a couple other options. I don't exactly remember, it's been so long since I've had stock recovery.
ctomgee said:
CM9 discussion thread. Has installation instructions in post 1, which don't involve using ROM Manager at all. As I said earlier, I'd avoid using ROM Manager; it often misbehaves on this device.
Here's some advice... even though I don't use CM (7 or 9), I found that that thread in 1 second by typing "cyanogenmod9 i9100 xda discussion thread" into Google. It was the first result that came up.
I know forum search sometimes is down, but I actually prefer to use Google for my searches anyways. You can even limit searches to a specific site by including "site:" followed by whatever site you are interested in limiting your search to.
For example, if I wanted to search the xda forums for i9100 rooting techniques, I'd Google:
site:forum.xda-developers.com i9100 rooting techniques
This will return a Google search for "i9100 rooting techniques" that are within the forum.xda-developers.com domain.
Rule #1 of the forum is to search before posting anyways... I know you're new to most of this, but you'll find people will tend to either not help or will be kind of mean if you post commonly asked questions.
Hope all this helps.
---------- Post added at 12:33 PM ---------- Previous post was at 12:31 PM ----------
Boot to recovery. You'll know because CWM recovery has MANY more options than stock recovery. Stock recovery you can only wipe data/factory reset, wipe cache, and wipe dalvik cache, and maybe a couple other options. I don't exactly remember, it's been so long since I've had stock recovery.
Click to expand...
Click to collapse
Okay thanks.
Believe me I spent 5 hours last night searching for answers and reading.
I appreciate your help.
gashalasha7 said:
Okay thanks.
Believe me I spent 5 hours last night searching for answers and reading.
I appreciate your help.
Click to expand...
Click to collapse
Sometimes it's just a matter of inputting the right search terms.
Anyways, I'd also advise you to follow the "noob-proof" installation instructions only on that CM9 discussion thread. It is the most straight-forward, and involves the fewest amount of steps.
now its gone into kernel panic upload mode
this is a mare
gashalasha7 said:
now its gone into kernel panic upload mode
this is a mare
Click to expand...
Click to collapse
Were you following the "noob-proof" instructions as I advised?
What exact steps did you take?

question regarding sayah 3.5.1 and with/without mic swap

Hello.
I just rooted my ATT GS2 I777 phone using a method over at galaxys2root.com. i then installed the latest kernel 3.5.1 Sayah WITHOUT mic swap. Can someone please tell me the difference between WITH and WITHOUT mic swap and what it is exactly?
I'm looking for a rom to install now and seem to be having issues finding one that isn't based off the 9100 phone even though they are listed in the I777 forums. I would like to install Serendipity9 or Galaxy Nexus ROMs but not sure if I needed the 3.5.1 WITH mic swap rom or not.
Please help.
Thanks.
With Without mike swap is for I777 stock roms and custom roms made from I777 stock as base, ie Semi. Mike swap is for roms made from I9100 base, or aosp roms.
It doesn't really matter though, because when you install a custom rom, it will also install the kernel that comes with the rom. If it doesn't come with your preferred kernel, then you can flash the kernel or your choice after you flash the rom of your choice.
I think you meant to say for your first word is "Without", correct?
I'm going to try to install Serendipity9 even though I can't find anything about the change log to see what kernel is included.
jackal2001 said:
I think you meant to say for your first word is "Without", correct?
I'm going to try to install Serendipity9 even though I can't find anything about the change log to see what kernel is included.
Click to expand...
Click to collapse
Yes. Fixed it, lol.
The kernel is CherryPicker. See here. I think it's been a while since the rom has been updated. I think Mikey is working on something else now.
I did get the Serendipity 9.4 installed and then ran Siyah 3.5.1 Kernel (with mic swap) and so far everything seems to be working ok.
Thank you for your help.
I would flash something else asap.. Here's a hint, anything it our development section!
Clay
Team Pirate
Sent from my PINK SGH-I777
Please don't talk secret code. I don't have my decoder ring.
If there is something wrong with something I used, please let me know.
jackal2001 said:
Please don't talk secret code. I don't have my decoder ring.
If there is something wrong with something I used, please let me know.
Click to expand...
Click to collapse
There is no code... If you can't understand that you shouldn't be messing with your phone
jackal2001 said:
I just rooted my ATT GS2 I777 phone using a method over at galaxys2root.com
Click to expand...
Click to collapse
Flash something ASAP and get off of that sh¡t - and NEVER use anything from that site again.
It's for your own good.
Clay
Team Pirate
Sent from my PINK SGH-I777
Not sure what you are talking about.
I rooted my phone using their method (odin and siyah kernel). yes now my phone boots saying I9100 and the yellow triangle.
I then Installed Serendipity 9.4 Rom from their official site.
I then Installed Siyah Kernel 3.5.1 from here.
I didn't want to brick my phone by rooting and there are a lot of methods to do so and a lot of old information out on the forums.
What is wrong with what I did?
I plan on going to Jellybean and the latest siyah when the time comes when more stable.
I did see this post over here:
http://forum.xda-developers.com/showpost.php?p=18859438&postcount=199
I was thinking about doing the below and following the instructions, but no description was there for what this actually did and I'm new to all this.
Odin3 One-click Downloader I-777 UCKH7 Stock + Root No Bootloaders
I would appreciate it if you can point me in the right direction on how to properly put the phone back and then how to properly root it again.
Well basically this site had a lot of great info and awesome devs. But other sites take their stuff, post links to download the roms and never give proper credit. As far as what yer asking, are u asking how to return to stock? If so, just Google XDA i777 download repository. Here's a link to it. http://forum.xda-developers.com/showpost.php?p=20229527&postcount=46 I would go with the stock rooted 2.3.4 without boot loaders. Flash it with Odin. Or mobile Odin pro.
Sent from my SGH-I777 using Tapatalk 2
I'm asking (since they are telling me to get this **** off my phone) how to get it properly rooted and then go from there.
So if I just run Odin3 One-click Downloader I-777 UCKH7 Stock + Root No Bootloaders, that will properly put my phone back to factory + being rooted. Correct?
The only issue I have with my phone is it boots with an I9100 screen instead of the I777 screen. If I run the above with that properly show the I777 screen or not?
I'm guessing I have some bootloader on my phone since it is showing the I9100 screen??? That is why you guys are telling me to get that off there???
jackal2001 said:
Not sure what you are talking about.
I rooted my phone using their method (odin and siyah kernel). yes now my phone boots saying I9100 and the yellow triangle.
I then Installed Serendipity 9.4 Rom from their official site.
I then Installed Siyah Kernel 3.5.1 from here.
I didn't want to brick my phone by rooting and there are a lot of methods to do so and a lot of old information out on the forums.
What is wrong with what I did?
I plan on going to Jellybean and the latest siyah when the time comes when more stable.
I did see this post over here:
http://forum.xda-developers.com/showpost.php?p=18859438&postcount=199
I was thinking about doing the below and following the instructions, but no description was there for what this actually did and I'm new to all this.
Odin3 One-click Downloader I-777 UCKH7 Stock + Root No Bootloaders
I would appreciate it if you can point me in the right direction on how to properly put the phone back and then how to properly root it again.
Click to expand...
Click to collapse
There's nothing wrong with what you did. You rooted your phone and installed a custom firmware without causing any problems. If you are satisfied with your phone as it is, do not flash back to stock just because of some of the posts here.
There are problems with GalaxyS2Root.com. Some of the files that are available there cause people to brick their phones, or have other problems. When the name comes up, people here react to it. That accounts for some of the posts here. But in your case, since you had no problems, and your custom flash went ok as well, not to worry.
Because you flashed a custom kernel using Odin when you rooted with the GalaxyS2Root method, you incremented the flash counter, which also causes the I9100 boot screen with the yellow warning triangle. That can be cleared with a USB jig, or with the application Triangle Away by codeworx which can be used only on ICS or above.
---------- Post added at 08:54 PM ---------- Previous post was at 08:49 PM ----------
jackal2001 said:
I'm asking (since they are telling me to get this **** off my phone) how to get it properly rooted and then go from there.
So if I just run Odin3 One-click Downloader I-777 UCKH7 Stock + Root No Bootloaders, that will properly put my phone back to factory + being rooted. Correct?
The only issue I have with my phone is it boots with an I9100 screen instead of the I777 screen. If I run the above with that properly show the I777 screen or not?
I'm guessing I have some bootloader on my phone since it is showing the I9100 screen??? That is why you guys are telling me to get that off there???
Click to expand...
Click to collapse
You did not flash I9100 bootloaders. Samsung was lazy, when they made the firmware for I777 they didn't update that image, so it still says I9100.
Oh, and I would suggest that you avoid GalaxyS2Root.com in the future for your own peace of mind.
Creepy,
Thanks again. I did send you a PM as well.
I don't know what a bootloader is and thought maybe the cause of the I9100 screen is due to a bootloader which may cause problems or something for future installs of Kernels and ROMs.
Since my phone is already rooted I plan to just continue to use this site for ROMs and Kernels. I'm still learning.
jackal2001 said:
Creepy,
Thanks again. I did send you a PM as well.
I don't know what a bootloader is and thought maybe the cause of the I9100 screen is due to a bootloader which may cause problems or something for future installs of Kernels and ROMs.
Since my phone is already rooted I plan to just continue to use this site for ROMs and Kernels. I'm still learning.
Click to expand...
Click to collapse
Yeah absolutely man! Sorry I was confused about your question. Thought u wanted to return to stock just to start over fresh. Didn't mean to confuse u or try to cause you any additional work. If it isn't broke, like creepy said, no need to do anything. good luck!
Sent from my SGH-I777 using Tapatalk 2
Thanks but it was the other guys that had me worried as they said to get rid fo that immedately.
I would start over fresh if needed but it looks like I'm ok anyway. I'll move to Siyah 4.1.1( or later) and Jellybean at a later time when more stable I guess.

From Cm9 to Cm10

Hello guys, I'm running CM9 with siyah kernel. I want to update to CM10 stable build.
Should I again load kernel via Odin!
What steps should i follow.
Please provide links to do download anything required as i'm concerned abt corrupt files
rickson23 said:
Hello guys, I'm running CM9 with siyah kernel. I want to update to CM10 stable build.
Should I again load kernel via Odin!
What steps should i follow.
Please provide links to do download anything required as i'm concerned abt corrupt files
Click to expand...
Click to collapse
just go to this thread read 3-4 lines in OP
you will get everything
http://forum.xda-developers.com/showthread.php?t=1794758
nitinvaid said:
just go to this thread read 3-4 lines in OP
you will get everything
http://forum.xda-developers.com/showthread.php?t=1794758
Click to expand...
Click to collapse
hey nitin Buddy, I know this is not the right place to talk to you but please check you PM. I have PM you..
Sorry guys of this Off topic.
Yeah everything ok but why to flash CWM recovery?
How do I check I have proper working CWM as mentioned?
Because you need cwm to install a zip file to your phone.
If you have siyah running on your device, you have cwm recovery. Use that.
Sent from my GT-I9100 using xda app-developers app
My model number is GT-I9100
Should I choose Galaxy S2 GT-I9100G or the Intl While selecting phone to install rom.
Can I install this ROM.please help
http://get.cm/get/jenkins/9838/cm-10-20121011-EXPERIMENTAL-i9100g-M2.zip
No. Like the link says, its a rom for the i9100G. Yours is the international version. You need to use a ROM that's built for your variant else you brick your phone. Use the search button and read ROM descriptions and instructions before installing.
Sent from my GT-I9100 using xda app-developers app
Which link Do i have to select from this page http://www.get.cm/?device=i9100
Also since i have siyah kernel running , i can directly install Zip right?
Are you saying the cm10 thread doesnt have links or install instructions.
If you are lazy and cant follow simple instructions,then modding your phone isnt for you.
Havent you learned ANYTHING since the last time.
I hope you also appreciate the time Ive wasted posting in this thread and the effort I went to adding a pic to my sig..........for your benefit......lol.
theunderling said:
Are you saying the cm10 thread doesnt have links or install instructions.
If you are lazy and cant follow simple instructions,then modding your phone isnt for you.
Havent you learned ANYTHING since the last time.
I hope you also appreciate the time Ive wasted posting in this thread and the effort I went to adding a pic to my sig..........for your benefit......lol.
Click to expand...
Click to collapse
The page has several Links ? I'm a noob who updates for better battery and just sticks to that ROM.
I'm also very conscious after reading a wrong file can brick the phone.

Categories

Resources