I have X10 mini...Recently i tried flashing nAa JB rom...kernel flashed well...But when i tried flashing ROM, it stuck at the middle for an hour.So, I shut down the device hardly by pressing back button and power and volume buttons!! Now a strange situation is being faced by the device. I flashed with the same kernel and other kernels too... irrespective of the kernel, Device shows boot looping of the kernel screen and LED sensors(red and orange both) again and again..But didnot go into the CWM...Please help..me!!!!!!! :crying:
Shall i leave it until battery drains fully and flash again? is there any possibility to get into CWM?
phaniblaze said:
I have X10 mini...Recently i tried flashing nAa JB rom...kernel flashed well...But when i tried flashing ROM, it stuck at the middle for an hour.So, I shut down the device hardly by pressing back button and power and volume buttons!! Now a strange situation is being faced by the device. I flashed with the same kernel and other kernels too... irrespective of the kernel, Device shows boot looping of the kernel screen and LED sensors(red and orange both) again and again..But didnot go into the CWM...Please help..me!!!!!!! :crying:
Shall i leave it until battery drains fully and flash again? is there any possibility to get into CWM?
Click to expand...
Click to collapse
Bro there is no os in the photo. So it becomes a bootloop.. try to flash a differnt kernel nd try to enter cwm or xrecovery nd flash a new rom to ur phone.. or u can flash a new image via flashtool..
Sent from my X10i using xda premium
I've tried flashing nAa's ginger bread kernels(3), stelios's JB kernel, also stock.........But none of them take me to CWM!!!pls help me out of this weird problem!!!
Sounds to me that you didn't unlocked your bootloader, did you?
thegearhead said:
Sounds to me that you didn't unlocked your bootloader, did you?
Click to expand...
Click to collapse
I've unlocked bootloader year back!! I've been through almost all the roms in my mini!!!
You did do the correct wipes when you flashed, right?
It could be your partitions messed up but I don't know except that wouldn't be good
X10man
Sent from my U20i using xda premium
Seus back to stock. Then flash the jb kernel via flashtool and format all mtd partitions. There is a reason you should format them. Dont ommit this step. Good luck.
Sent from my Galaxy Nexus using Tapatalk 2
thegearhead said:
Sounds to me that you didn't unlocked your bootloader, did you?
Click to expand...
Click to collapse
i did unlock!!
Thanx nAa...But my thinking is that kernel performance is respective to phone memory and kernel is what takes us to CWM!! Isn't it? Is there any link between kernel and Custom data on SD card except flashing the ROM for a respective kernel?
As per your suggestion, SEUS says Your Phone do not have any software to be installed..even if i flash JB after flashing stock kernel, CWM doesnt appear..except the LOGO and white and orange sensors blinking and looping again and again...
Can anyone help what nAa mean to say about partitioning? I'm a noob in partitioning and dont know about mtd partitioning...!!!Any help would be really appreciated!!
Do Help guyz!!
nobodyAtall said:
Seus back to stock. Then flash the jb kernel via flashtool and format all mtd partitions. There is a reason you should format them. Dont ommit this step. Good luck.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
nAa can u please tell me how to format mtd partitions? Is that a normal formatting of my sd card? or something else? Any one else caan really help me out!!!!!!!
phaniblaze said:
nAa can u please tell me how to format mtd partitions? Is that a normal formatting of my sd card? or something else? Any one else caan really help me out!!!!!!!
Click to expand...
Click to collapse
it s write on naa kernel post :
This kernel introduces custom mtd partitioning with larger /system partition to hold the extra JB calories. If you are moving from another custom kernel to this one, you MUST first format /system /data and /cache via the embedded CWM recovery
So you need on first boot go to CWM and format /system /data and /cache
phaniblaze said:
nAa can u please tell me how to format mtd partitions? Is that a normal formatting of my sd card? or something else? Any one else caan really help me out!!!!!!!
Click to expand...
Click to collapse
Look at the instructions in the kernel-thread, it's very straight-forward:
You flash the Kernel
You boot into CWM
You go into Mounts and Storage
Format /system
Format /data
Format /cache
And next time: READ!!!!!! Don't ask questions that are clearly answered already.
SmG67 said:
Look at the instructions in the kernel-thread, it's very straight-forward:
You flash the Kernel
You boot into CWM
You go into Mounts and Storage
Format /system
Format /data
Format /cache
And next time: READ!!!!!! Don't ask questions that are clearly answered already.
Click to expand...
Click to collapse
I'm not dumb!! I read the post , U read my dveice's problem first and then u get into reply!!! If u dont know shut up!!! My device problem is that Kernel loops again again but wont take me to CWM...If this happened, wouldnt have put question in this thread!! U might not be knowing that if kernel boots properly, i would get into the CWM..Anyways, Me and nAa were on discussion and others who can clearly solve my problem are welcome..Rest of the Noobs, Shut and F**K and i'm sorry coz my problem is such now and i'm peak of my anger!!!
phaniblaze said:
I'm not dumb!! I read the post , U read my dveice's problem first and then u get into reply!!! If u dont know shut up!!! My device problem is that Kernel loops again again but wont take me to CWM...If this happened, wouldnt have put question in this thread!! U might not be knowing that if kernel boots properly, i would get into the CWM..Anyways, Me and nAa were on discussion and others who can clearly solve my problem are welcome..Rest of the Noobs, Shut and F**K and i'm sorry coz my problem is such now and i'm peak of my anger!!!
Click to expand...
Click to collapse
You asked how to format MTD partitions...
I'm telling you how...
All nAa told you was to go back to stock, because that will restore the partitions to normal, and then flash the JB kernel again and format the mtd-partitions.
It's nothing to do with your sd-card
IF SEUS or PC Companion can't repair your phone, i guess you're buggered royally.
SmG67 said:
You asked how to format MTD partitions...
I'm telling you how...
All nAa told you was to go back to stock, because that will restore the partitions to normal, and then flash the JB kernel again and format the mtd-partitions.
It's nothing to do with your sd-card
IF SEUS or PC Companion can't repair your phone, i guess you're buggered royally.
Click to expand...
Click to collapse
I flashed Stock kernel but PC Companion Or SEUS Does nothing,,,,its all over and now i'm ready to submit at Service Centre...
phaniblaze said:
I flashed Stock kernel but PC Companion Or SEUS Does nothing,,,,its all over and now i'm ready to submit at Service Centre...
Click to expand...
Click to collapse
Will flashtool let you root it and install xrec?
Maybe that way you could get it to work still
I've got a complete stock firmware for flashtool for the x10mini, i'm not sure if the partitions get resized when you flash it using flashtool, but i guess it could be worth a try.
PM me for the link if you're interested.
Get into fast boot mode and flash a different boot image.
Rachit
rachit.rc96 said:
Get into fast boot mode and flash a different boot image.
Rachit
Click to expand...
Click to collapse
We don't have fastboot on the 2010 phones, and no boot images.
SmG67 said:
We don't have fastboot on the 2010 phones, and no boot images.
Click to expand...
Click to collapse
Thanks SmG!! I tried everything to my best,,,but the the real thing never happened to anyone has happened to my Mini ..Partitions messed up and it cudnt respond to any of the options in the flash tool either in fastboot method or flash mode..
Anyways, it is with my friend now and being given to SONY Concern....Get well soon my MINI!!!!!!! Miss you! :crying:
phaniblaze said:
Thanks SmG!! I tried everything to my best,,,but the the real thing never happened to anyone has happened to my Mini ..Partitions messed up and it cudnt respond to any of the options in the flash tool either in fastboot method or flash mode..
Anyways, it is with my friend now and being given to SONY Concern....Get well soon my MINI!!!!!!! Miss you! :crying:
Click to expand...
Click to collapse
Good luck m8
Related
Hi guys,
I've got a big problem, I've used "format/system" in xRecovery and now when I reboot, I'm only getting the Sony Ericsson logo. I did a backup on SDcard but I'm a Mac user so I've used Crossover to use SEUS and try to restore. The problem is the phone isn't detected, only the green LED is turn on but nothing happen on the Mac...
I'm gonna try on PC, but if you can help me ... it will be great !!
(Sorry guys for my english, but I'm a french student who spend more time on his X10 than in english class !)
I think you use flashtool and flash a 2.1 firmware
Flash Tool
2.1 Firmware can also be found in the flashtool post.
Can you use xRecovery after this problem?
If so, why don't you restore the backup that you have made ?
kozxmartt said:
Can you use xRecovery after this problem?
If so, why don't you restore the backup that you have made ?
Click to expand...
Click to collapse
I think the format erases the xrec. In this case, as the colleague up there told him flashtool is the solution.
G-FACE said:
I think the format erases the xrec. In this case, as the colleague up there told him flashtool is the solution.
Click to expand...
Click to collapse
no, nothing done from the xrecovery erases xrecovery..!! anyways you can use flashtool..!!
Thanks a lot guys, it works !
same problem here but i have tried flash tool many time.what shall i do?
Hi jojooo89,
I suppose crossover might not help you in flashing even thought it might detect the phone after some tinkering.
flashing works only on windows either throught SEUS or flashtool...
the reason being usbflash.dll is only on windows.
jojooo89 said:
Hi guys,
I've got a big problem, I've used "format/system" in xRecovery and now when I reboot, I'm only getting the Sony Ericsson logo. I did a backup on SDcard but I'm a Mac user so I've used Crossover to use SEUS and try to restore. The problem is the phone isn't detected, only the green LED is turn on but nothing happen on the Mac...
I'm gonna try on PC, but if you can help me ... it will be great !!
(Sorry guys for my english, but I'm a french student who spend more time on his X10 than in english class !)
Click to expand...
Click to collapse
christos3290 said:
same problem here but i have tried flash tool many time.what shall i do?
Click to expand...
Click to collapse
If you can still get into x-recovery, you could try mounting your SD card, copying over a ROM and then installing it with x-recovery
kaisan1 said:
no, nothing done from the xrecovery erases xrecovery..!! anyways you can use flashtool..!!
Click to expand...
Click to collapse
This is not true. In 'Partition Tools' there is a 'Format System' option that formats everything including the system files/folders. Since XRecovery files are in the 'System' folder using this option removes XRecovery. There is a warning in the XRecovey thread to never use this option without having another system image to replace it with.
I would assume based on that warning though that there is some way to replace the system but thats a question for Z.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
Yeap, i believe i'm screwed. i did that and well... my /system files are screwed.
if my battery is dead and i cant charge it from the phone what shall i do??
are you using a wall charger?
Sent from my X10 TripNMiUI using XDA Premium App
its something which i plug on the wall socket and then the usb is connected on that. no matter how many hours i leave it to charge as soon as i unplug the usb my phone turns off
jojooo89 said:
Thanks a lot guys, it works !
Click to expand...
Click to collapse
How did you fix the problem?
ballebel said:
How did you fix the problem?
Click to expand...
Click to collapse
Use flashtool and flash the generic firmware.
Sent from my X10i using XDA App
ballebel said:
How did you fix the problem?
Click to expand...
Click to collapse
Hzu said:
Use flashtool and flash the generic firmware.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Exactly, it worked perfect for me !
I format the system of my X8
Me too, I format the system of my Sony X8 with the Xrecovery and now when I reboot, I'm only getting the Sony Ericsson logo.
How can I repair the X8 smartphone? with flashtool and generic firmware?
where can I find that software?
system format, cannot flash
Hey everyone!
I have a huge problem. I tried to update my OS from cm10 5.1 kernel v16 to cm10 8.1 kernel v18.
I used system format, and when I start my phone it just showed me CM10 logo.
I tried to flash to stock verision, somehow I managed it, but now SE logo on my phone, and I can not flash again, because when I flash my phone it's starting itselfs automatically, so the flashing stops
Could someone help me? I hope you could understand what I wrote.
Thanks
Csabci
Re: [Q] Oops, I've used format/system ... :)
Csabci85 said:
Hey everyone!
I have a huge problem. I tried to update my OS from cm10 5.1 kernel v16 to cm10 8.1 kernel v18.
I used system format, and when I start my phone it just showed me CM10 logo.
I tried to flash to stock verision, somehow I managed it, but now SE logo on my phone, and I can not flash again, because when I flash my phone it's starting itselfs automatically, so the flashing stops
Could someone help me? I hope you could understand what I wrote.
Thanks
Csabci
Click to expand...
Click to collapse
Do you hold back button while flashing?
+no recovery?
sent via ULTIMATE GB beta
hey.. i unlocked the bootloader successfully then flashed the new jb kernel, but now my x10 mini pro shows jbmini boot screen then the se logo and does not go further.. i couldn't flash the rom and xrecovery as the phone is stuck..
Can anybody help?
annex10 said:
hey.. i unlocked the bootloader successfully then flashed the new jb kernel, but now my x10 mini pro shows jbmini boot screen then the se logo and does not go further.. i couldn't flash the rom and xrecovery as the phone is stuck..
Can anybody help?
Click to expand...
Click to collapse
Follow the rest of the instructions...
SmG67 said:
Follow the rest of the instructions...
Click to expand...
Click to collapse
can you please post the instructions...?
annex10 said:
can you please post the instructions...?
Click to expand...
Click to collapse
They're in the opening post of the JB Rom you want to flash.
You unlocked your bootloader...
You flashed the kernel...
Go on... Do the rest as well...
SmG67 said:
They're in the opening post of the JB Rom you want to flash.
You unlocked your bootloader...
You flashed the kernel...
Go on... Do the rest as well...
Click to expand...
Click to collapse
i read all the steps.. but how do i wipe all the data when the phone is not starting..? i have even put xrecovery on the sd card, but its not opening be clicking back at the start..
I can't boot into xrecovery.. please help!
i read through tutorial and but xrecovery, busybox and chargemon in bin in the system folder..i made it on my pc as my phone is not going beyond the se logo..
annex10 said:
I can't boot into xrecovery.. please help!
i read through tutorial and but xrecovery, busybox and chargemon in bin in the system folder..i made it on my pc as my phone is not going beyond the se logo..
Click to expand...
Click to collapse
CWM is already included in the Kernel... just press back-button repeatedly when the nAa-logo shows...
SmG67 said:
CWM is already included in the Kernel... just press back-button repeatedly when the nAa-logo shows...
Click to expand...
Click to collapse
Thanks alot!
Its working
annex10 said:
Thanks alot!
Its working
Click to expand...
Click to collapse
Well done I could have talked you through all this, but it was just a case of you stopping half way through the process that made your phone stop working, not you doing anything wrong really, so good on you
Hi,
I checked the forum and try those and it didnt work.
This is the story. i try to install a custom rom to my friend's xperia x10 mini. I unlocked the bootloader. Rooted and installed a kernel Jelly Bean Mini projects kernel. Also install the apk for CWM. After i flash the JB Mini Kernel i stuck at the JB Mini logo. Entering the CWM does not worked. Then i paniced and flashed the custom kernel. Then this time it is not opened only stuck at the SE logo. After that E10i_2.1.1.A.0.6_Sony Ericsson.ftf firmware and flashed via flash tool. This time is stuck in the boot logo loop. It didnt give a chance to flash another kernel again. Opening and resetting again. ALso PC Companion Repair doesnt work because it get disconnect on doing it.
Also i tried home screen and power button to reset and then try to flash mode and it didnt allow me to do it. Do you guys any suggestion. How can i get rid of it and get back to normal.
All helps will be appreciated. Thanks.
C0ND01N said:
Hi,
I checked the forum and try those and it didnt work.
This is the story. i try to install a custom rom to my friend's xperia x10 mini. I unlocked the bootloader. Rooted and installed a kernel Jelly Bean Mini projects kernel. Also install the apk for CWM. After i flash the JB Mini Kernel i stuck at the JB Mini logo. Entering the CWM does not worked. Then i paniced and flashed the custom kernel. Then this time it is not opened only stuck at the SE logo. After that E10i_2.1.1.A.0.6_Sony Ericsson.ftf firmware and flashed via flash tool. This time is stuck in the boot logo loop. It didnt give a chance to flash another kernel again. Opening and resetting again. ALso PC Companion Repair doesnt work because it get disconnect on doing it.
Also i tried home screen and power button to reset and then try to flash mode and it didnt allow me to do it. Do you guys any suggestion. How can i get rid of it and get back to normal.
All helps will be appreciated. Thanks.
Click to expand...
Click to collapse
connect it to SEUS and flash back to stock rom. even i have the same issue
alienwrz said:
connect it to SEUS and flash back to stock rom. even i have the same issue
Click to expand...
Click to collapse
Also connected to seus and tried.to repair means stock rom and kernel. But when I choose xperia mini after downloaded the items seus need to connect.device.in flash mode. But when I connect it.restart again and seus couldn't do.anything.
Maybe another solutions perhaps?
Thanks btw.
Sent from my LT18i using xda app-developers app
C0ND01N said:
Also connected to seus and tried.to repair means stock rom and kernel. But when I choose xperia mini after downloaded the items seus need to connect.device.in flash mode. But when I connect it.restart again and seus couldn't do.anything.
Maybe another solutions perhaps?
Thanks btw.
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
yes it will ask you to connect in flash mode.... while the pop up screen shows the image of phone. connect your via usb and press home+back key it will hard reboot the phone, once it off keep holding the back button you will see led turning green and it will go into flash mode and you follow the on screen instructions
let me know if it works
alienwrz said:
yes it will ask you to connect in flash mode.... while the pop up screen shows the image of phone. connect your via usb and press home+back key it will hard reboot the phone, once it off keep holding the back button you will see led turning green and it will go into flash mode and you follow the on screen instructions
let me know if it works
Click to expand...
Click to collapse
I also tried hard reboot like you said. It connect device and reboot again while disconnect then again and again. This time battery drained. Maybe fastboot mode will work and will save my...
I am at work atm. I will try when I get back to.home. I have Xperia arc also faced same loop situation but when I remove battery it works like a charm.
Also cwm didn't work on mini. Initiate the cwm is back button like on Xperia arc I guess.
Also need.help.after save this phone. Custom kernel, rom and how to run/install cwm.
Thanks
Sent from my LT18i using xda app-developers app
C0ND01N said:
I also tried hard reboot like you said. It connect device and reboot again while disconnect then again and again. This time battery drained. Maybe fastboot mode will work and will save my...
I am at work atm. I will try when I get back to.home. I have Xperia arc also faced same loop situation but when I remove battery it works like a charm.
Also cwm didn't work on mini. Initiate the cwm is back button like on Xperia arc I guess.
Also need.help.after save this phone. Custom kernel, rom and how to run/install cwm.
Thanks
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
Make sure you're talking about the right model phone, the Xperia Mini and Xperia x10 Mini are different phones. If you have the x10 Mini, then fastboot won't work at all.
Yes, CWM is available by repeatedly pressing the back-button when the kernel-logo shows, and it is included in ALL custom kernels for the x10 mini, just not on stock, so if you flash a custom kernel it is already available without any further action on your part.
C0ND01N said:
I also tried hard reboot like you said. It connect device and reboot again while disconnect then again and again. This time battery drained. Maybe fastboot mode will work and will save my...
I am at work atm. I will try when I get back to.home. I have Xperia arc also faced same loop situation but when I remove battery it works like a charm.
Also cwm didn't work on mini. Initiate the cwm is back button like on Xperia arc I guess.
Also need.help.after save this phone. Custom kernel, rom and how to run/install cwm.
Thanks
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
never flash under low battery... maintain atleast 50% of battery and then flash. i think the method i told dint work since u had low battery... charge it via wall socket and then try my method.
SmG67 said:
Make sure you're talking about the right model phone, the Xperia Mini and Xperia x10 Mini are different phones. If you have the x10 Mini, then fastboot won't work at all.
Yes, CWM is available by repeatedly pressing the back-button when the kernel-logo shows, and it is included in ALL custom kernels for the x10 mini, just not on stock, so if you flash a custom kernel it is already available without any further action on your part.
Click to expand...
Click to collapse
Hi,
U really.have my attention there. My friend have xperia x10 mini. I tried to install a custom rom on her device. But I messed things up. Unlocked the bootloader and installed jb mini.kernel and stucked on boot.logo. Then I flash custom kernel again now its stuck.on.boot logo like a loop. Seus repair wont work because it disconnects simultaneously. Also flashing a kernel didint work either. I hope somebody helps me to recovery the device. After that somehow I can install custom rom.
Thanks. I really appreciated.
Sent from my LT18i using xda app-developers app
C0ND01N said:
Hi,
U really.have my attention there. My friend have xperia x10 mini. I tried to install a custom rom on her device. But I messed things up. Unlocked the bootloader and installed jb mini.kernel and stucked on boot.logo. Then I flash custom kernel again now its stuck.on.boot logo like a loop. Seus repair wont work because it disconnects simultaneously. Also flashing a kernel didint work either. I hope somebody helps me to recovery the device. After that somehow I can install custom rom.
Thanks. I really appreciated.
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
Yes, the JB kernel requires you to format the /system, /data and /cache partitions in CWM on first boot, otherwise you get stuck, and you'll be unable to install the JB ROM. (Mind you, if it's version 4 of Stelios97's JB Kernel, that's been reported as not working at all)
(Not sure if you're doing your friend a favour with JB just yet, not if she wants to use her phone like she does now, you might be better off with MiniCM7)
Make sure your batter has a decent amount of charge in it, and try to flash this with flashtool, it's stock firmware that should get the phone back working properly.
After that, you can try again with the custom kernel and ROM.
SmG67 said:
Yes, the JB kernel requires you to format the /system, /data and /cache partitions in CWM on first boot, otherwise you get stuck, and you'll be unable to install the JB ROM. (Mind you, if it's version 4 of Stelios97's JB Kernel, that's been reported as not working at all)
(Not sure if you're doing your friend a favour with JB just yet, not if she wants to use her phone like she does now, you might be better off with MiniCM7)
Make sure your batter has a decent amount of charge in it, and try to flash this with flashtool, it's stock firmware that should get the phone back working properly.
After that, you can try again with the custom kernel and ROM.
Click to expand...
Click to collapse
i face same issue
I wanted to install gb or ics or jb on my x10mini (e10i)
my baseband is : M76XX-TSNCjoLYM-53404015
firmware : 2.1-update1
android v : 2.1.1.A.0.6.
i successfully rooted my phone and unlocked the bootloader using flashtools 0.9.8.0.
but my problem is when ever i try to flash custom kernel i get this error
Code:
ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Failed to init erase";
i tried all custom kernel including nAa-13, nAa-14, nAa-ics,nAa-jb. everything fails and i get my phone semi bricked with phone reboots and all i get is white screen and LED glows White.
then i use SEUS to flash back to stock rom. i did this for almost 20times so far everytime it fails....
SmG67 said:
Yes, the JB kernel requires you to format the /system, /data and /cache partitions in CWM on first boot, otherwise you get stuck, and you'll be unable to install the JB ROM. (Mind you, if it's version 4 of Stelios97's JB Kernel, that's been reported as not working at all)
(Not sure if you're doing your friend a favour with JB just yet, not if she wants to use her phone like she does now, you might be better off with MiniCM7)
Make sure your batter has a decent amount of charge in it, and try to flash this with flashtool, it's stock firmware that should get the phone back working properly.
After that, you can try again with the custom kernel and ROM.
Click to expand...
Click to collapse
I will try what u said as soon as I get home. If I save the device 'll try your suggestion Rom and kernel.
Thanks
Sent from my LT18i using xda app-developers app
alienwrz said:
i face same issue
I wanted to install gb or ics or jb on my x10mini (e10i)
my baseband is : M76XX-TSNCjoLYM-53404015
firmware : 2.1-update1
android v : 2.1.1.A.0.6.
i successfully rooted my phone and unlocked the bootloader using flashtools 0.9.8.0.
but my problem is when ever i try to flash custom kernel i get this error
Code:
ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Failed to init erase";
i tried all custom kernel including nAa-13, nAa-14, nAa-ics,nAa-jb. everything fails and i get my phone semi bricked with phone reboots and all i get is white screen and LED glows White.
then i use SEUS to flash back to stock rom. i did this for almost 20times so far everytime it fails....
Click to expand...
Click to collapse
I hope you chose flashmode when flashing and not fastboot?
SmG67 said:
Yes, the JB kernel requires you to format the /system, /data and /cache partitions in CWM on first boot, otherwise you get stuck, and you'll be unable to install the JB ROM. (Mind you, if it's version 4 of Stelios97's JB Kernel, that's been reported as not working at all)
(Not sure if you're doing your friend a favour with JB just yet, not if she wants to use her phone like she does now, you might be better off with MiniCM7)
Make sure your batter has a decent amount of charge in it, and try to flash this with flashtool, it's stock firmware that should get the phone back working properly.
After that, you can try again with the custom kernel and ROM.
Click to expand...
Click to collapse
I flashed your ftf it flashed without an error but there isnt any Sony logo or something. It bright a bit and reboot again. What do you think guys?
Hey,
is there another way to solve this problem? I really need that. Its been 2 days device down
Thanks
C0ND01N said:
Hey,
is there another way to solve this problem? I really need that. Its been 2 days device down
Thanks
Click to expand...
Click to collapse
Do you get a red led when you try to power it on?
SmG67 said:
Do you get a red led when you try to power it on?
Click to expand...
Click to collapse
Yea, when i try to connect in flashmode (back button and plug in) it gets a red led. Didint recognized Adb device after that.(Flash your ftf i guess)
Thanks.
C0ND01N said:
Yea, when i try to connect in flashmode (back button and plug in) it gets a red led. Didint recognized Adb device after that.(Flash your ftf i guess)
Thanks.
Click to expand...
Click to collapse
hmmmzzz, sounds like your battery is empty... leave it to charge, preferably from the wall-charger.
It *should* turn on, show the white Sony Ericsson text and then a battery...
SmG67 said:
hmmmzzz, sounds like your battery is empty... leave it to charge, preferably from the wall-charger.
It *should* turn on, show the white Sony Ericsson text and then a battery...
Click to expand...
Click to collapse
Now its green in flash mode
Also i tried again SEUS Repair and it said something like you dont have any software for you. Now what should i do? I charged
C0ND01N said:
Now its green in flash mode
Also i tried again SEUS Repair and it said something like you dont have any software for you. Now what should i do? I charged
Click to expand...
Click to collapse
If the ftf i sent you flashed without problem, you have the latest firmware from sony, so SEUS can't update your phone from that. What does it do when you connect it to the wallcharger?
SmG67 said:
If the ftf i sent you flashed without problem, you have the latest firmware from sony, so SEUS can't update your phone from that. What does it do when you connect it to the wallcharger?
Click to expand...
Click to collapse
I connect to the wallcharger and try to power on but there isnt any Sony Ericson logo. its just 1 moment bright screen and some kind of reboot i guess. Then a bright screen and then dark.
Do you know what is the problem here?
Hello, sorry for my bad english. I have a problem, my Xperia Ray is stuck on boot logo after flash this ROM http://forum.xda-developers.com/showthread.php?t=1788672 ... I've been tried to flash official rom with flash tool with no sucess, i've tried to use PC Companion and SEUS but it says that my device is already updated and not have new updates. When i flash my device i realize that it still shows things about the version that i uninstall, it's weird because i flashed and wiped everything. The capacitive buttons and display doesn't work too. Please help me, i tried everything but nothing work. I hope you can help me to fix it.:crying: I leave to you some pictures of the problems:crying:
My solution:
http://forum.xda-developers.com/showpost.php?p=40004040&postcount=10
For $2 I have 4 recoveries.
For me it was the only way.
ErickST18 said:
Hello, sorry for my bad english. I have a problem, my Xperia Ray is stuck on boot logo after flash this ROM http://forum.xda-developers.com/showthread.php?t=1788672 ... I've been tried to flash official rom with flash tool with no sucess, i've tried to use PC Companion and SEUS but it says that my device is already updated and not have new updates. When i flash my device i realize that it still shows things about the version that i uninstall, it's weird because i flashed and wiped everything. The capacitive buttons and display doesn't work too. Please help me, i tried everything but nothing work. I hope you can help me to fix it.:crying: I leave to you some pictures of the problems:crying:
Click to expand...
Click to collapse
is ur bootloader unlocked?
have u flashed a custom kernel?
if yes,u can still boot into recovery and wipe data,dalvik cache nd battery stats
and did u install the patch?
coolancool said:
is ur bootloader unlocked?
have u flashed a custom kernel?
if yes,u can still boot into recovery and wipe data,dalvik cache nd battery stats
and did u install the patch?
Click to expand...
Click to collapse
Yes it's unlocked. Yes i flashed Radeon 4.0 Kernel... I tried wiping data, dalvik and battery stats but it still doesn't work.
Yep i did it too. I don't know what to do:crying:
panayi said:
My solution:
http://forum.xda-developers.com/showpost.php?p=40004040&postcount=10
For $2 I have 4 recoveries.
For me it was the only way.
Click to expand...
Click to collapse
Hmm got it, thank you bro i didn't think in this option. But, what i should do? Where i get these option?:crying: ... Didn't any other process works for your device?
ErickST18 said:
Yes it's unlocked. Yes i flashed Radeon 4.0 Kernel... I tried wiping data, dalvik and battery stats but it still doesn't work.
Yep i did it too. I don't know what to do:crying:
Click to expand...
Click to collapse
wipe all the data and try fashing the rom again is all that i can say...or the last option wud be to go to the Sony center and pay THEM instead of others and repair ur phone
---------- Post added at 08:50 AM ---------- Previous post was at 08:43 AM ----------
OR u cud try flashing back stock kernel,relocking the bootloader and then flash .587 firmware in ur device....try it!
Guys i got another problem... When i try to use Wotan to flash my device, it close... I mean, when i connect my ray in flash mode, the wotanclient close :S I tried on XP and Seven and i have the same problem. Can u help me?
ErickST18 said:
Hello, sorry for my bad english. I have a problem, my Xperia Ray is stuck on boot logo after flash this ROM http://forum.xda-developers.com/showthread.php?t=1788672 ... I've been tried to flash official rom with flash tool with no sucess, i've tried to use PC Companion and SEUS but it says that my device is already updated and not have new updates. When i flash my device i realize that it still shows things about the version that i uninstall, it's weird because i flashed and wiped everything. The capacitive buttons and display doesn't work too. Please help me, i tried everything but nothing work. I hope you can help me to fix it.:crying: I leave to you some pictures of the problems:crying:
Click to expand...
Click to collapse
how did u unlock your bootloader ?
and
how did u root your phone ? (i mean which process)
the ways in which rooting phone also affects the phone
newkid39 said:
how did u unlock your bootloader ?
and
how did u root your phone ? (i mean which process)
the ways in which rooting phone also affects the phone
Click to expand...
Click to collapse
The phone has already unlocked when i bought it... I can't remember exactly name of applications i used, I remember that i first intall Gingerbread then i root GB with Doomlord or something like that, and then install ICS but unchecking "wipe data" on flash tool, sorry that i dont give the name of the applications but im not in my pc. I hope you know what i'm talking about. Sorry for my bad english :S
Sony Ericsson Xperia st18i hang on logo solution
I try all those but not succeed after that i think is it Hardware?? when check there is problem with Charging Socket so please all of u check this and post reply, i'm success:good::good:
Not Boot
Hi
I have the Same problem. I can't flash my ST18i. Always fail. Not Boot-up. Only Sony log. How did you solve this problem?
need help...
i've used flashtool many times until now, i dont know whats wrong with it...
1. my ZU got boot loop, then i force to turn it off... (i want to get in to recovery but there is no sign that my zu has it... )
2. i've tried to flash kernel to my zu but failed... (
3. so i tried to flashed my zu to a new one (rom), but i got no signal at all...
4. then i tried again no 2 but got the same result...:crying: (hope that i can to restore my backup from recovery)
what i have to do guys...
i hope there is a kind peoples that will try to help me... (i wish :angel: )
regards
G sound said:
need help...
i've used flashtool many times until now, i dont know whats wrong with it...
1. my ZU got boot loop, then i force to turn it off... (i want to get in to recovery but there is no sign that my zu has it... )
2. i've tried to flash kernel to my zu but failed... (
3. so i tried to flashed my zu to a new one (rom), but i got no signal at all...
4. then i tried again no 2 but got the same result...:crying: (hope that i can to restore my backup from recovery)
what i have to do guys...
i hope there is a kind peoples that will try to help me... (i wish :angel: )
regards
Click to expand...
Click to collapse
What version are you from and what do you what to flash it with...are you trying to downgrade your firmware....are you unlocked or locked bootloader...
Sent from my C6833 using Tapatalk
martin132014 said:
What version are you from and what do you what to flash it with...are you trying to downgrade your firmware....are you unlocked or locked bootloader...
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
well i came from 757 IN version and i use doomlords kernel...
i think i stuck in 3.4.0-perf-g6f5bf40 kernel... (wich i dont know what that is... :laugh: ) plus flashtool 0.9.16...
Please help me Master...:angel:
thanks for your responds
regards
G sound said:
well i came from 757 IN version and i use doomlords kernel...
i think i stuck in 3.4.0-perf-g6f5bf40 kernel... (wich i dont know what that is... :laugh: ) plus flashtool 0.9.16...
Please help me Master...:angel:
thanks for your responds
regards
Click to expand...
Click to collapse
How are you trying to get into recovery?
What does the LED do while you boot the ZU?
I would just flash jackie099's kernel and restore the backup from there - I cant see how flashtool would be failing except for a problem on the PC
G sound said:
well i came from 757 IN version and i use doomlords kernel...
i think i stuck in 3.4.0-perf-g6f5bf40 kernel... (wich i dont know what that is... :laugh: ) plus flashtool 0.9.16...
Please help me Master...:angel:
thanks for your responds
regards
Click to expand...
Click to collapse
If its so hard for you, i suggest to flash 757 ftf and begin from scratch...its not so hard to do it all over again...after you get recovery, just restore your backup...
Sent from my C6833 using Tapatalk
blueether said:
How are you trying to get into recovery?
What does the LED do while you boot the ZU?
I would just flash jackie099's kernel and restore the backup from there - I cant see how flashtool would be failing except for a problem on the PC
Click to expand...
Click to collapse
If its so hard for you, i suggest to flash 757 ftf and begin from scratch...its not so hard to do it all over again...after you get recovery, just restore your backup...[/QUOTE]
yes master...
i cant get into recovery, i used to get no problem at all flashing kernels or down/upgrading ftf to it...
but right now i'm stuck with this kernel wich theres no recovery at all, no light no recovery...:crying:
i've tried to reflash kernels many times but failed...
the worse part that i got is that it has no signal at all...:crying:
if i flash it with any new ftf (down/upgrade), the kernel should be replace by the list on ftf package right...
but not mine...
Stucks... (3.4 bla bla)
how could i recover my ZU if i cant flash the kernel...:crying:
thanks for your responds...
yes master...
i cant get into recovery, i used to get no problem at all flashing kernels or down/upgrading ftf to it...
but right now i'm stuck with this kernel wich theres no recovery at all, no light no recovery...:crying:
i've tried to reflash kernels many times but failed...
the worse part that i got is that it has no signal at all...:crying:
if i flash it with any new ftf (down/upgrade), the kernel should be replace by the list on ftf package right...
but not mine...
Stucks... (3.4 bla bla)
how could i recover my ZU if i cant flash the kernel...:crying:
thanks for your responds...
Click to expand...
Click to collapse
.
Well use flashtool to flash a kernel like jackie009 or any other that works for you.....
mathurmatt said:
.
Well use flashtool to flash a kernel like jackie009 or any other that works for you.....
Click to expand...
Click to collapse
i dont know master...
from the very first i learned to flash ZU, i've used flashtool until now too...
G sound said:
i dont know master...
from the very first i learned to flash ZU, i've used flashtool until now too...
Click to expand...
Click to collapse
Just flash 757 ftf not kernel..flash it with flashtool not recovery...it will restore your phone....then root it again...
Sent from my C6833 using Tapatalk
G sound said:
i dont know master...
Click to expand...
Click to collapse
I'm positive that I've seen this pr0n before.
Sent from my C6833 using Tapatalk
Installing a kernel is a simple process.
I am runnnig DoomKernel on Nordic stock .757
battery life is great
G sound said:
need help...
i've used flashtool many times until now, i dont know whats wrong with it...
1. my ZU got boot loop, then i force to turn it off... (i want to get in to recovery but there is no sign that my zu has it... )
2. i've tried to flash kernel to my zu but failed... (
3. so i tried to flashed my zu to a new one (rom), but i got no signal at all...
4. then i tried again no 2 but got the same result...:crying: (hope that i can to restore my backup from recovery)
what i have to do guys...
i hope there is a kind peoples that will try to help me... (i wish :angel: )
regards
Click to expand...
Click to collapse
Download this: https://mega.co.nz/#!Vh8xEZYR!HwGosI...VlhUObM0NdNrPg
Make sure your phone is turned off.
Start Flashtool and click the lightening bolt at the top left and select 'FASTBOOT MODE'.
You should now see a new window of flashtool titled FASTBOOT TOOLBOX.
Plug in your phone while holding the Volume Up button
Back on flashtool: To the far right where it says 'By DOOMLORD', just below that the second option is 'Select Kernel to Flash', click it.
Browse for the .IMG file that you downloaded from the top of this post(which is the boot file for your phone to boot and let you into recovery).
Change the file type that's listed next to File Name at the bottom of the browse window, to .IMG
Select the .img file and it should flash automatically and tell you to check the log list shown right in flashtool before rebooting. If you don't see any errors then go ahead and unplug your device and boot it and try going into recovery.
You should be good to go now.
LordManhattan said:
I'm positive that I've seen this pr0n before.
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
Yes master...:good:
CEROSERDNA said:
Installing a kernel is a simple process.
I am runnnig DoomKernel on Nordic stock .757
battery life is great
Click to expand...
Click to collapse
Me too but before I got stuck...
CEROSERDNA said:
Installing a kernel is a simple process.
I am runnnig DoomKernel on Nordic stock .757
battery life is great
Click to expand...
Click to collapse
Me too but right now I got stuck...
Jammol said:
Download this: https://mega.co.nz/#!Vh8xEZYR!HwGosI...VlhUObM0NdNrPg
Make sure your phone is turned off.
Start Flashtool and click the lightening bolt at the top left and select 'FASTBOOT MODE'.
You should now see a new window of flashtool titled FASTBOOT TOOLBOX.
Plug in your phone while holding the Volume Up button
Back on flashtool: To the far right where it says 'By DOOMLORD', just below that the second option is 'Select Kernel to Flash', click it.
Browse for the .IMG file that you downloaded from the top of this post(which is the boot file for your phone to boot and let you into recovery).
Change the file type that's listed next to File Name at the bottom of the browse window, to .IMG
Select the .img file and it should flash automatically and tell you to check the log list shown right in flashtool before rebooting. If you don't see any errors then go ahead and unplug your device and boot it and try going into recovery.
You should be good to go now.
Click to expand...
Click to collapse
I can't download it... It say invalid argument...
G sound said:
I can't download it... It say invalid argument...
Click to expand...
Click to collapse
I think we need to see a log or screen grab of the output of flashtool when you try and flash a kernel and a FTF
I think "invalid argument" normally happens on a locked bootloader???
blueether said:
I think we need to see a log or screen grab of the output of flashtool when you try and flash a kernel and a FTF
I think "invalid argument" normally happens on a locked bootloader???
Click to expand...
Click to collapse
Sorry I forgot to unlock bootloader again...
But even I unlock it I'm still stuck...
I'll send the log when I get back to my home then...
Thanks again to all of you masters...
G sound said:
Sorry I forgot to unlock bootloader again...
But even I unlock it I'm still stuck...
I'll send the log when I get back to my home then...
Don't forget to backup you TA PARTITION before you unlock your device,
If you need any help PM me ill be glad to help
Click to expand...
Click to collapse