Related
I Downloaded and installed the ICS update last night and have been living in hell since. It doesn't have the soft buttons it is supposed to, so navigating through everything is an absolute nightmare! I want to go back to my standard rooted phone. But I have followed MANY, MANY guides, and it will not work. I have downloaded 10 different ROMS and FIRMWARES today and Flashed OVER AND OVER. I am completely stuck and NEED help please.
I have used Recovery to try and install new Roms, Used Odin as well, and I get problems EVERY time. It will reboot, load, and as soon as the "Touch the Android to Begin" logo comes up, It starts having process failures popping up over and over, preventing me from being able to do anything. Forcing me to reflash to ICS again.
Can someone please explain the process to take it back to stock so I can re-root it?
Did you wipe everything when you installed the roms? Data, cache, Dalvik?
Find stock roms here for odin:
http://forum.xda-developers.com/showthread.php?t=1075278
Just make sure to download and install the correct rom depending on which SGSII you have.
xfile102 said:
I Downloaded and installed the ICS update last night and have been living in hell since. It doesn't have the soft buttons it is supposed to, so navigating through everything is an absolute nightmare! I want to go back to my standard rooted phone. But I have followed MANY, MANY guides, and it will not work. I have downloaded 10 different ROMS and FIRMWARES today and Flashed OVER AND OVER. I am completely stuck and NEED help please.
I have used Recovery to try and install new Roms, Used Odin as well, and I get problems EVERY time. It will reboot, load, and as soon as the "Touch the Android to Begin" logo comes up, It starts having process failures popping up over and over, preventing me from being able to do anything. Forcing me to reflash to ICS again.
Can someone please explain the process to take it back to stock so I can re-root it?
Click to expand...
Click to collapse
first install stock rom from this link
http://forum.xda-developers.com/showthread.php?t=1075278
then download this rom (i think this is best ICS Rom) and install it with CMW(you should copy the rom inside your internal SD) then full wipe your phone and install rom .
http://forum.xda-developers.com/showthread.php?t=1451346
it isn't hard to push thanks button
All you need to do, if having FCs is perform a factory reset (via recovery)...
Sent from my GT-I9100 using Tapatalk
xfile102 said:
I Downloaded and installed the ICS update last night and have been living in hell since. It doesn't have the soft buttons it is supposed to, so navigating through everything is an absolute nightmare! I want to go back to my standard rooted phone. But I have followed MANY, MANY guides, and it will not work. I have downloaded 10 different ROMS and FIRMWARES today and Flashed OVER AND OVER. I am completely stuck and NEED help please.
I have used Recovery to try and install new Roms, Used Odin as well, and I get problems EVERY time. It will reboot, load, and as soon as the "Touch the Android to Begin" logo comes up, It starts having process failures popping up over and over, preventing me from being able to do anything. Forcing me to reflash to ICS again.
Can someone please explain the process to take it back to stock so I can re-root it?
Click to expand...
Click to collapse
Why don't people search...?
http://forum.xda-developers.com/showthread.php?t=1449771
Kaze105 said:
Did you wipe everything when you installed the roms? Data, cache, Dalvik?
Find stock roms here for odin:
http://forum.xda-developers.com/showthread.php?t=1075278
Just make sure to download and install the correct rom depending on which SGSII you have.
Click to expand...
Click to collapse
@Kaze & @Medhi, I went to the Link you provide above, which is INCREDIBLY well laid out and helppful, If I lived anywhere in the world except The US. There arent any Firmwares provided for North America there. Any other suggestions? That was a great resource if they only had some North America Help
xfile102 said:
@Kaze & @Medhi, I went to the Link you provide above, which is INCREDIBLY well laid out and helppful, If I lived anywhere in the world except The US. There arent any Firmwares provided for North America there. Any other suggestions? That was a great resource if they only had some North America Help
Click to expand...
Click to collapse
Use any version... It is universal! Stop complaining and use search MORE OFTEN!
Sent from my GT-I9100 using xda premium
Phistachio said:
Why don't people search...?
http://forum.xda-developers.com/showthread.php?t=1449771
Click to expand...
Click to collapse
Phistachio!!! Thank You. And to reply, I most certainly DID search, MANY, MANY topics. I thought my phone was bricked but came across SOOOO many threads saying if your phone would load into a ROM it is most certainly NOT BRICKED, leading a n00b such as myself to believe I needed to search for a different issue. Always helps to know what you are looking FOR when searching. This looks awesome. I will try it right away and get back to you with an update as to whether this fixes it.
Phistachio said:
Why don't people search...?
http://forum.xda-developers.com/showthread.php?t=1449771
Click to expand...
Click to collapse
Phistachio - I followed your link, but when you get to the following step:
4) Download the necessary files : the Kernel, the Recovery Package and the Bootloader (it's the old one, which you can easily use a USB JIG to reset the counter and remove the yellow triangle when having a custom kernel or OS),
The link provided for the Recover Package is a Hotfile.com link, and the Archive that it downloads is PASSWORD PROTECTED, and there is no mention of a password anywhere on the page you provided, nor on the hotfile.com page.
Any Ideas?
zylor said:
Use any version... It is universal! Stop complaining and use search MORE OFTEN!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Zylor, Thanks for the overt Negativity in your post. I was making sure we were clear, not complaining. I wasn't aware that telling someone that they have provided a great resource was "complaining". And when the OP AND the page he sends you to VERY CLEARLY say ONLY USE THE CORRECT VERSION, far be it for me to magically know that I can grab any random version from CHINA or wherever and have it work on my US ATT GS2. Sorry for trying to follow instructions and avoid a potential brick. But thanks for being a hateful Troll.
xfile102 said:
Phistachio - I followed your link, but when you get to the following step:
4) Download the necessary files : the Kernel, the Recovery Package and the Bootloader (it's the old one, which you can easily use a USB JIG to reset the counter and remove the yellow triangle when having a custom kernel or OS),
The link provided for the Recover Package is a Hotfile.com link, and the Archive that it downloads is PASSWORD PROTECTED, and there is no mention of a password anywhere on the page you provided, nor on the hotfile.com page.
Any Ideas?
Click to expand...
Click to collapse
Password is probably samfirmware.com or [email protected]
Are you sure you've got an I9100 and not an I9100G or whatever?
Sent from my Samsung Galaxy S II using Tapatalk.
mbutandola said:
Are you sure you've got an I9100 and not an I9100G or whatever?
Click to expand...
Click to collapse
Actually, you may be able to help me there. Most site reference only the I9100 or the I9100G. My Phone Hardware has a sticker saying SGH-I777, but the boot screen has always said GT-I9100. So which would it be?
xfile102 said:
Actually, you may be able to help me there. Most site reference only the I9100 or the I9100G. My Phone Hardware has a sticker saying SGH-I777, but the boot screen has always said GT-I9100. So which would it be?
Click to expand...
Click to collapse
You have the AT&T device.
Your correct forum is at http://forum.xda-developers.com/forumdisplay.php?f=1301
Not sure from the details supplied, but have youtried AT&T specific Roms?
Over at this site http://galaxys2root.com/category/att-galaxy-s2-roms/ (Thanks to Max) they have quite a few to try. And make sure you do a complete wipe before you flash one of them ie, factory reset, clear cache then advanced delvik cache and battery stats and then install from zip.
Hope this helps.
I followed all the instructions, and my phone rebooted into the ROM. But it is not stock. My Back and Search buttons still do not work, and the Recovery is 3e, so I cant use the Recovery function because my model (US AT&T) doesn't have the OK button. Since I cant get it to take a screenshot, i'll list the info below:
Android Version: 2.3.5
Baseband Version: I9100XXKI3
Kernel Version: 2.6.35.7-I9100XXKI3-CL577579 [email protected] #2
Build Number: GINGERBREAD.XXKI3
I just want to get it back to AT&T Stock, or a WORKING 2.3.6. But as it stands, It doesnt work properly, because my Back Button does not work, nor my Search button.
All Guidance is appreciated. I want to get back to the Stock Bootloader, not the ICS Bootloader
P.S. - I DID SEARCH FOR THIS INFO. When I did, I came up with threads like:
http://forum.xda-developers.com/showthread.php?t=1317372
- Turns out it only works on the CHINESE SGS2.
Bobgnarley said:
Not sure from the details supplied, but have youtried AT&T specific Roms?
Over at this site http://galaxys2root.com/category/att-galaxy-s2-roms/ (Thanks to Max) they have quite a few to try. And make sure you do a complete wipe before you flash one of them ie, factory reset, clear cache then advanced delvik cache and battery stats and then install from zip
Click to expand...
Click to collapse
Bob!! Thats exactly what I want to do. But I cant, because the Recovery installed on my phone wont let me do anything because I dont have the OK button on my phone. I tried the power button and everything else, I cannot make selections in Recovery 3e, so the only way to get out of it is to pull the battery.
Xfile if your sticker says at&t sgh-i777 theres a complete forum dedicated to that model here in xda. Better pop in there and find more help.
They also have model specific roms over there and surely they should work. Wannit to post the link but not sure how to from the xda app yet.
Good luck.
Sent from my GT-I9100 using xda premium
xfile102 said:
Phistachio - I followed your link, but when you get to the following step:
4) Download the necessary files : the Kernel, the Recovery Package and the Bootloader (it's the old one, which you can easily use a USB JIG to reset the counter and remove the yellow triangle when having a custom kernel or OS),
The link provided for the Recover Package is a Hotfile.com link, and the Archive that it downloads is PASSWORD PROTECTED, and there is no mention of a password anywhere on the page you provided, nor on the hotfile.com page.
Any Ideas?
Click to expand...
Click to collapse
No problem I'm glad I can help
The password is samfirmware.com
BTW, to replace the ICS bootloader flash the BL in the thread
Also, I would like to apologize for my first reply (the "Why didn't you search" one)... It was a bit rude...
Phistachio said:
No problem I'm glad I can help
The password is samfirmware.com
BTW, to replace the ICS bootloader flash the BL in the thread
Also, I would like to apologize for my first reply (the "Why didn't you search" one)... It was a bit rude...
Click to expand...
Click to collapse
No Sweat. I'm just trying to follow instructions and get this fixed ASAP. I did flash the bootloader mentioned, with no errors in Odin, but it still loads with the new galaxy S logo animation instead of the old GT-I9100 Logo with the Yellow Exclamation point. AND, I still have no use of the Back and Search buttons, functionality that is removed in the new ICS. What am I doing wrong? I cannot seem to get my phone back to Stock Android.
Dear all,
I'm having a connectivity problem with my Samsung Galaxy SII and I think I tried everything in all combinations possible that I could find in many many forums (it charges, but is not recognized. I tried: 3 different cables, 2 computers xp/w7, modem/pda code, 100x uninstalling kies and still no connection, no connection with ODIN, updating drivers, removing sd-card, debug mode on/off, mass storage, cleaning USBport with alcohol). Do you know any other options that I might try, or can I just assume my USB port is dead?
Anyway, my real question is the next. Is it possible to root the device in a way without using the USB cable? My from booting from SD-Card or so? I would like this in order to be able to update the firmware in the future with on-device apps, considering the USB-port is dead. For all the options I found in other forums, like ABD Wifi, Mobile ODIN and CWM, you need root on forehand.
It would be great if you could give me some suggestions! Thanks
Btw, I'm nowhere near a service point, and at this point would like to keep the phone with me, since it's working fine besides this problem
Have you installed the Samsung USB driver?
Sent from my GT-I9100 using XDA App
I don't want to jump to the wrong conclusion here.. but have you actually put your phone into download mode for this? ie starting from off.. hold vol down + home button, power on whilst still holding the buttons.
Maybe SuperOneClick ? Don't ask me the how/why/in's & out's of it as I've never used it. Search for it on here.
As far as I know, there is no way to root without using a computer connected via USB.
If the USB port is faulty, and you on stock, which it sounds like you are, get Samsung to repair it.
Sent from my GT-I9100 using Tapatalk
Has anyone tried to create an update.zip able to be used via the stock 3e recovery??
I don't know if it's possible to root this way but if it is it would be very handy.
Sent from my GT-I9100 using XDA App
Thanks for all the quick replies!
SaneinOne said:
Have you installed the Samsung USB driver?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Yes, I have. Multiple times. Also uninstalled and reinstalled them often through the KIES repair option
DreadPirateDan said:
I don't want to jump to the wrong conclusion here.. but have you actually put your phone into download mode for this? ie starting from off.. hold vol down + home button, power on whilst still holding the buttons.
Click to expand...
Click to collapse
Yes, I have. In all possible sequence possibilities (first phone, then start ODIN, other way around, from without battery, etc.). No any connection however to ODIN.
aceofclubs said:
Has anyone tried to create an update.zip able to be used via the stock 3e recovery??
I don't know if it's possible to root this way but if it is it would be very handy.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Even tried that, I always get a "signature error"
Guess my USB is dead then and no options to upgrade my firmware exist?
If your phone is playing up/USB appears cactus and you're still running stock firmware/haven't rooted it/messed around with it in any way, why tempt fate ? Return it for warranty service/replacement, and when you get it back & know everything's working, then you can flash whatever rom/kernel you want or root the phone.
Last thing you want to do is root it or flash non-stock firmware & then have the phone die on you & be unable to go back to stock. Goodbye warranty.
You mean ODIN does not recognize your device? If so, make sure KIES is not running at the back. Did you updated KIES? Maybe you can go to previous version...
SGS II - XDA
Maybe this can help - certainly looks like the real deal.
Seems to work for the ICS ROM mentioned in the thread, you should be able to download all required files via the phone, you have root, and then flash whichever ROM you like.
Thanks all for the comments!
MistahBungle said:
If your phone is playing up/USB appears cactus and you're still running stock firmware/haven't rooted it/messed around with it in any way, why tempt fate ? Return it for warranty service/replacement, and when you get it back & know everything's working, then you can flash whatever rom/kernel you want or root the phone.
Last thing you want to do is root it or flash non-stock firmware & then have the phone die on you & be unable to go back to stock. Goodbye warranty.
Click to expand...
Click to collapse
I flashed it with this non-stock firmware. I don't have any warrenty, since I'll just have to pay for the repairs. Probably, they'll use a "water damage" argument for my faulty usb-port, as I read in many other forums.
ITRC said:
You mean ODIN does not recognize your device? If so, make sure KIES is not running at the back. Did you updated KIES? Maybe you can go to previous version...
Click to expand...
Click to collapse
Indeed, ODIN does not recognize my device. I killed all of the KIES application(s) with task manager. I indeed updated KIES, but also tried previous versions.
B3311 said:
Maybe this can help - certainly looks like the real deal.
Seems to work for the ICS ROM mentioned in the thread, you should be able to download all required files via the phone, you have root, and then flash whichever ROM you like.
Click to expand...
Click to collapse
Thanks, I'll take a look at it!
palingboerJoop said:
Thanks all for the comments!
I flashed it with this non-stock firmware. I don't have any warrenty, since I'll just have to pay for the repairs. Probably, they'll use a "water damage" argument for my faulty usb-port, as I read in many other forums.
Thanks, I'll take a look at it!
Click to expand...
Click to collapse
I mean KIES from your desktop/portable... not the mobile version.
ITRC said:
I mean KIES from your desktop/portable... not the mobile version.
Click to expand...
Click to collapse
Yes, I know. I did that. But thanks anyway
B3311 said:
Maybe this can help - certainly looks like the real deal.
Seems to work for the ICS ROM mentioned in the thread, you should be able to download all required files via the phone, you have root, and then flash whichever ROM you like.
Click to expand...
Click to collapse
This would really be the best solution! Unfortunately, this is only for ICS.. If one of you see an option like this for GB, please let me know!!
Root S2 I9100GDDKL1 (India)
Hi,
I would like to root my S2 to install Titanium Backup and setCPU to have better control over my phone (remove bloatware, control battery and performance and such). Not looking to install a custom ROM at the moment.
My handset specs are:
Baseband version: I9100GDDKL1
Running: Android version 2.3.6
Build number: Gingerbread.XWLA1
Kernel Version: 2.6.35.7 [email protected]#2
I have been searching for an insecure and original PDA that matches the above to flash my device but have not been successful so far.
I initially started off attempting to Root using DooMLoRD_v4_ROOT-zergRush-busybox-su but was unsuccessful as my PC was not recognizing my phone.
I hope someone can help. BTW I am a Noob.
This link is to a "G" model kernel flashable via Odin.
http://forum.xda-developers.com/showthread.php?t=1506954
Just make sure you only flash items for the I9100G and not the I9100 international version.
Have fun.
Sent from my GT-I9100 using XDA App
Thanks a bunch
Thanks yall,
The root worked like a charm. I was able to install all the root tools that I required and good to go now.
I used Odin ver 1.85 and flashed superatmos v.3.0 kernel. I then rooted the device using superoneclick (I could not get the S2 Root to work for some reason - It kept saying that the device was not connected)
Next steps:
Plannning to flash the original kernel back to remove the warning sign on startup - Any advice?
I am sold on the merits of rooting. The flexibility is amazing.
P.S. Could someone help me with re-flashing the original kernel? I tried searching for it over the net but could not locate anything similar.
Hello everyone,
Hoping you can help me before my mrs cuts my nuts off. She asked me to update her GS2 (GT-I9100 on 02) and completly wipe the phone as she has had random apps appear etc etc.
I said that wouldnt be a problem as ive done alot on my GS3, though i am still pretty new to the Android scene (Previously iPhone).
So she was on Stock 4.0.4 XXLQ6 firmware.
I followed the guide to root from here as i was aware of the hardbrick bug in this firmware.
http://forum.xda-developers.com/showthread.php?t=1501719
After that it was time for the Wipe data etc and flash the new rom. I chose JELLYBAM as its Android 4.2 with a mix of other things. Sounded perfect.
I followed all the steps EXACTLY from the Devs page:
http://www.igio90.net/how-to-install/
All seemed to be going well at first, got to select afew options etc. Then it said it was Extracting the package...This is were the problems started.
It was stuck at 2% for AGES, then out of the blue the screen just went BLACK/BLANK......Hmmmm i thought!
I have since been trying to source info from everywere about how to turn the phone back on but having no luck at all. I have tried all the Soft/Hard boot methods, ive left it on charge (Yes it gets hot near the camera) and tried all boot methods whilst plugged into laptop with ODIN loaded up.
Nothing seems to be working.
Any help what so ever will be much appreciated. This device was never previously rooted. Im gutted a it was all going so well...I shoulda guessed something would go wrong.
Toon
Are you able to enter download mode? If you can make sure you have samsung drivers installed! Also JellyBam rom is not only for i9100 but other models too, are you sure you had the right rom? If you can't enter downlaod mode then try a USB jig?
Sent from my GT-I9100 using xda premium
UltimateAnas said:
Are you able to enter download mode? If you can make sure you have samsung drivers installed! Also JellyBam rom is not only for i9100 but other models too, are you sure you had the right rom? If you can't enter downlaod mode then try a USB jig?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Thank you for your reply, Unfortunatly i cannot enter any mode what so ever. The phone is literally dead...yet getting VERY hot as its plugged in.
Was thinking about taking it in to O2 2mora and seeing what they can do. Damn.
If your still under warranty you should get a new motherboard.They won't be able to tell you've rooted it since it seems hard bricked.
Next time,get a custom kernel on it a.s.a.p and backup efs and make a nand backup before you start flashing roms.
Either that or stay away from 4.0.4 stock.
Sent from my GT-N7000 using xda premium
theunderling said:
If your still under warranty you should get a new motherboard.They won't be able to tell you've rooted it since it seems hard bricked.
Next time,get a custom kernel on it a.s.a.p and backup efs and make a nand backup before you start flashing roms.
Either that or stay away from 4.0.4 stock.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks for your reply, I did put a custom kernal (Sirayh?) on it prior.
The phone was a year old august just gone! Not sure Samsung be interested.
See if you can get your hands on a usb jig.If that fails try for a jtag.
Samsung warranty should be 24 months if you need it.
Sent from my GT-N7000 using xda premium
So you did a wipe on a Samsung 4.0.4 ROM with original kernel? Then you have indeed hardbricked your phone. You said you were aware of this bug, so I can't figure out why you would do a wipe?
Cenobite_ said:
So you did a wipe on a Samsung 4.0.4 ROM with original kernel? Then you have indeed hardbricked your phone. You said you were aware of this bug, so I can't figure out why you would do a wipe?
Click to expand...
Click to collapse
No i changed the kernal, but followed the guide posted by DEV to install the ROM. Guessing i made a mistake somewere down the line as the phone is bricked!!
JIG & JTAG....will these help solve my problem? Not really clued up on them though i have done a brief look around. JTAG services is not in my area.
NO, on hardbricked S2 JIG/JTAG won't be useful. You can check my thread http://forum.xda-developers.com/showthread.php?t=1756242 for more info.
PS : the direct signs of this kind of hardbrick is a totally dead phone & back side getting hot (near the camera lens)
googy_anas said:
NO, on hardbricked S2 JIG/JTAG won't be useful. You can check my thread http://forum.xda-developers.com/showthread.php?t=1756242 for more info.
PS : the direct signs of this kind of hardbrick is a totally dead phone & back side getting hot (near the camera lens)
Click to expand...
Click to collapse
Is there any way to fix this or do i owe my mrs a new phone?
Just took it to a repair store and he said its knackered, but to be honest he wasnt much help...more interested in the texts he was getting on his phone!.....Typically a GS2...Im still pondering if he was taking the micky :silly:
if your s2 is still under warranty, just take it to the reapir service and tell them that the phone was on charge all night and didn't wake up in the morning
they won't be able to know what you did to it since it's completely unaccessible. If you successfully convince them, they'll change the motherboard !
PS : That isn't my idea but from what I saw in the hardbrick warning thread, most of the concerned people did the same trick ...
googy_anas said:
if your s2 is still under warranty, just take it to the reapir service and tell them that the phone was on charge all night and didn't wake up in the morning
they won't be able to know what you did to it since it's completely unaccessible. If you successfully convince them, they'll change the motherboard !
PS : That isn't my idea but from what I saw in the hardbrick warning thread, most of the concerned people did the same trick ...
Click to expand...
Click to collapse
Yeah i think this is the route imgoing to have to take Just spoke with them regards my GS3 and they said itll be 2 weeks to repair and return. No phone for 2 weeks
I just got off the phone with Samsung and they are taking it in for repair. No local service centers so im awaiting a jiffy bag. Then 2 weeks to get the phone back!
Plese, need help, tried to downgrade firmware from 4.0.4 to 4.0.3 using Odin and now i'm getting an error: android.process.acore has stopped, and can't really do anything.
is there anything I could do now or is my phone bricked?
Thanks in advance!
Pooshkis said:
Plese, need help, tried to downgrade firmware from 4.0.4 to 4.0.3 using Odin and now i'm getting an error: android.process.acore has stopped, and can't really do anything.
is there anything I could do now or is my phone bricked?
Thanks in advance!
Click to expand...
Click to collapse
Please be more specific if you expect anybody to bother to help you.
When you say "can't really do anything" that doesnt tell us what you have tried and not tried!
1) Can you enter recovery mode?
2) Can you enter download mode?
3) Have you tried a USB Jig?
4) Have you removed battery for 30 mins?
5) What happens when you power on phone?
TheATHEiST said:
Please be more specific if you expect anybody to bother to help you.
When you say "can't really do anything" that doesnt tell us what you have tried and not tried!
1) Can you enter recovery mode?
2) Can you enter download mode?
3) Have you tried a USB Jig?
4) Have you removed battery for 30 mins?
5) What happens when you power on phone?
Click to expand...
Click to collapse
Sorry.
1) Yes
2) Yes
3) trying to find now what it is
4) For 30 mins no, for few minutes - yes
5) It starts and then i got some errors memo.process, process.acore and few others (can't remember now). I can get email, explore through home screens and menus, but can't call, receive calls, write messages, look up contacts or memos and stuff only going through screens. Maybe I could do a hard reset or wipe the phone, but then won't i brick my phone?
EDIT: As user Pilaf suggested (thanking him a lot!) I installed a new siyha kernel then did a full wipe / factory reset, seems everything is backing up from google account and phone is working..
So you're telling me that the official 4.0.4 has a hardbrick bug? Well that's great.
Should I just wait for the official 4.1 or can I flash for example the Siyah kernel and then start flashing other ROMs?
krnrdstrm said:
So you're telling me that the official 4.0.4 has a hardbrick bug? Well that's great.
Should I just wait for the official 4.1 or can I flash for example the Siyah kernel and then start flashing other ROMs?
Click to expand...
Click to collapse
Did you just get released from a 6 month stretch in jail/or been in a coma or something.
Sent from my GT-N7000 using xda premium
theunderling said:
Did you just get released from a 6 month stretch in jail/or been in a coma or something.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
:laugh:
Come on man, he's serious, so let's answer seriously
@krnrdstrm : to avoid the hardbrick, just flash a safe kernel (siyah, speedmod, dorimanx, philz ...) and enjoy ...
PS : didn't you have internet in jail ? :silly:
emmc bug
krnrdstrm said:
So you're telling me that the official 4.0.4 has a hardbrick bug? Well that's great.
Should I just wait for the official 4.1 or can I flash for example the Siyah kernel and then start flashing other ROMs?
Click to expand...
Click to collapse
Yea, have a look here http://forum.xda-developers.com/showthread.php?t=1756242
Siyah should be good,
Thanks: googy_anas
Hi there i have a SGH-i717 with AT&T 2.3.4 Stock installed..I did have Cyanogen 10.1 and Avatar all installed in the last 72hrs..I have wiped all that and did a return to the stock AT&T thinking that my HOME keys would return..NO LUCK..The problems started about 4 days ago when the phone started turning itself off automatically..I changed custom ROM's etc to try and fix the problem..then i read to use Kies to try and do a Firmware Upgrade and Initialization to go back to the start when i first got the phone..But now Kies will NOT recognise the phone..I have re-installed drives, Kies to no avail..Any tips ?
Also someone suggested to flash this kernel h0tcakez-JB-Kernel-v2.3.5-ALT but when i tried through system recovery is gives a falied error..
I have nothing on the phone i need to worry about loosing...Cheers
kakadu44 said:
Hi there i have a SGH-i717 with AT&T 2.3.4 Stock installed..I did have Cyanogen 10.1 and Avatar all installed in the last 72hrs..I have wiped all that and did a return to the stock AT&T thinking that my HOME keys would return..NO LUCK..The problems started about 4 days ago when the phone started turning itself off automatically..I changed custom ROM's etc to try and fix the problem..then i read to use Kies to try and do a Firmware Upgrade and Initialization to go back to the start when i first got the phone..But now Kies will NOT recognise the phone..I have re-installed drives, Kies to no avail..Any tips ?
Also someone suggested to flash this kernel h0tcakez-JB-Kernel-v2.3.5-ALT but when i tried through system recovery is gives a falied error..
I have nothing on the phone i need to worry about loosing...Cheers
Click to expand...
Click to collapse
If you are on stock 2.3.4 and tried to flash that kernel .. that is why it failed .. it would be the wrong kernel for that rom. Did you flash a stock rom in recovery? If so then I would suggest using oden to return to stock . then see what you end up with.
SGH-i717 Home Keys not working
Bubbajoe40356 said:
If you are on stock 2.3.4 and tried to flash that kernel .. that is why it failed .. it would be the wrong kernel for that rom. Did you flash a stock rom in recovery? If so then I would suggest using oden to return to stock . then see what you end up with.
Click to expand...
Click to collapse
Thanx for you reply..I did however flash stock 2.3.4 from oden..I deleted everything in recovery then went to oden and flashed the stock rom..Should i unroot/unbrick flash from oden?
That article about returning to original settings in Kies seems to make sense except for the fact that i cannot get Kies to recognise the phone...
Are we talking about Software ou Hardare issue in your opinion?
Cheers
Could be a hardware issue. Try this ... Put the phone into download mode then connect to the pc. Use the cable that came with the phone. Also use a port on the back of the pc ..not a hub. Then open kies and do the emergency firmware update.
Also ... When you used Odin to go to stock ..you installed the 3e recovery ..that's why it failed to flash. Which is a good thing. That kennel would have boot looped you.
Sent from my Big Ass Outlaw Phone
SGH-i717 Home Keys not working
Bubbajoe40356 said:
Could be a hardware issue. Try this ... Put the phone into download mode then connect to the pc. Use the cable that came with the phone. Also use a port on the back of the pc ..not a hub. Then open kies and do the emergency firmware update.
Also ... When you used Odin to go to stock ..you installed the 3e recovery ..that's why it failed to flash. Which is a good thing. That kennel would have boot looped you.
Sent from my Big Ass Outlaw Phone
Click to expand...
Click to collapse
Okay i installed from ODIN Stock 2.3.4.....I dont have a port on the back of the PC to use as i only have a Laptop...Kies will not recognise the phone..Even when the phone is at Stock it takes soooo long to boot up..approx 2 mins..can i not run the emergency firmware update from ODEN? If so where can i find the software please..
Also even when i go into recovery mode it shows error signs..it wont let me wipe cache or wipe data/factory reset..
cheers
kakadu44 said:
Okay i installed from ODIN Stock 2.3.4.....I dont have a port on the back of the PC to use as i only have a Laptop...Kies will not recognise the phone..Even when the phone is at Stock it takes soooo long to boot up..approx 2 mins..can i not run the emergency firmware update from ODEN? If so where can i find the software please..
Also even when i go into recovery mode it shows error signs..it wont let me wipe cache or wipe data/factory reset..
cheers
Click to expand...
Click to collapse
The lap top is fine. Emergency firmware is through kies and not Odin. You need download mode ... Not recovery.
Sent from my Big Ass Outlaw Phone
Bubbajoe40356 said:
The lap top is fine. Emergency firmware is through kies and not Odin. You need download mode ... Not recovery.
Sent from my Big Ass Outlaw Phone
Click to expand...
Click to collapse
It will not recognise the phone in KIES!!!!! i have uninstalled USB drivers and re-installed and still it will not recognise the phone..Is there USB debugging in Stock 2.3.6? If so where do i find it in Settings pls? thanx
kakadu44 said:
It will not recognise the phone in KIES!!!!! i have uninstalled USB drivers and re-installed and still it will not recognise the phone..Is there USB debugging in Stock 2.3.6? If so where do i find it in Settings pls? thanx
Click to expand...
Click to collapse
Please can you advise me what is the best way to WIPE my phone of ALL my info to start over again, just like a complete wipe on my laptop..cheers
Have you tried here, briefmobile. com /exclusive-ucld3-ics-leak-for-the-att-galaxy-note
sp73smith said:
Have you tried here, briefmobile. com /exclusive-ucld3-ics-leak-for-the-att-galaxy-note
Click to expand...
Click to collapse
Hi there thanx for your answer..I have not tried at that site..this program will do what? COMPLETELY wipe my phone??cheers
It will, it completely erases everything. Replaces recovery and losses root. Very simple to use, I use it every other month.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
SGH-i717 HOME keys are not working...
sp73smith said:
It will, it completely erases everything. Replaces recovery and losses root. Very simple to use, I use it every other month.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Yep i used it..very good..But my original and main problem..Continues..NONE of my HOME keys are working..I fear that it is a Hardware issue with the SGH-i717..I guess i have to take it to Samsung for repair..Until someone else can give me a solution..I have tried everything and nothing has worked..No HOME keys..Cheers
Definitely not a hardware issue, there where some changes made IIRC in the kernel driver files, once flashed they prevented the homerow buttons from working normally, the only way I ever found to make them work right was to flash the Flappjaxxx alternate kernel series, let it boot, then return completely to stock!
If you dig around, FJ's alt kernel's are around here somewhere!
SGH-i717 HOME keys are not working...
Hammerfest said:
Definitely not a hardware issue, there where some changes made IIRC in the kernel driver files, once flashed they prevented the homerow buttons from working normally, the only way I ever found to make them work right was to flash the Flappjaxxx alternate kernel series, let it boot, then return completely to stock!
If you dig around, FJ's alt kernel's are around here somewhere!
Click to expand...
Click to collapse
Good morning, well i believe i have finally arrived at a possible solution..I have searched hi and low for these Flappjaxxx alternate kernel ..I came up with a daunting array of alternatives for the complete amatuer as i am..I appreciate that your time is precious but i do need some general direction what exactly i am searching for..I have found this one but to be quite honest i am not sure if i need this whole ROM or just the Flappjaxxx alternate kernel'a..
http://db.communityrelease.com/developer_display.asp?DeveloperID=11381
https://github.com/flappjaxxx/kernel_samsung_sghi717
Also when i do eventually obtain the Kernel that i am looking for can i use ODIN to flash it? I installed this ROM which i beleive to be stock already..You wrote that i need to return COMPLETELY to stock..What is that 2.3.6???
http://briefmobile.com/exclusive-ucld3-ics-leak-for-the-att-galaxy-note
I appreciate any further input you may be able to supple..regards kakadu44
kakadu44 said:
Good morning, well i believe i have finally arrived at a possible solution..I have searched hi and low for these Flappjaxxx alternate kernel ..I came up with a daunting array of alternatives for the complete amatuer as i am..I appreciate that your time is precious but i do need some general direction what exactly i am searching for..I have found this one but to be quite honest i am not sure if i need this whole ROM or just the Flappjaxxx alternate kernel'a..
http://db.communityrelease.com/developer_display.asp?DeveloperID=11381
https://github.com/flappjaxxx/kernel_samsung_sghi717
Also when i do eventually obtain the Kernel that i am looking for can i use ODIN to flash it? I installed this ROM which i beleive to be stock already..You wrote that i need to return COMPLETELY to stock..What is that 2.3.6???
http://briefmobile.com/exclusive-ucld3-ics-leak-for-the-att-galaxy-note
I appreciate any further input you may be able to supple..regards kakadu44
Click to expand...
Click to collapse
My work schedule is absolute hell, and due to people flaking at work I have been called in 2x to cover on my only days off...
Needless to say, im about to pass out, so im going to make this useless post...
Either I, or someone else can link you to a FJ rom, and the FJ alternate kernel that match, what you will need to do prior is make sure you have EVERYTHING you want/need, backed up to GMail (in the case of Phone logs, SMS and MMS with the Backup to GMail app, yes, im whoring this fantastic app out) AND to your computer, NO not your SD card, but your computer!
Make sure you have the latest recovery (TWRP 2.5.0.0 is what I have, but whatever TWRP is latest will do), wipe everything, then install the rom, boot, wait 10min, reboot into recovery, flash the alt kernel, boot, wait 10min, then test the home/back/menu/search key row, they should work, at this point, you CAN go back to the 2.x.x rom you where running, but if you have an i717, I have had nothing but love for the Stock rom update on AT&T once I performed a complete ODIN to it (flashing the ones here on the forum's resulted in random reboots here and there, and while less then ever before, still annoying, after an ODIN however, havent had a random reboot yet!).
There are issues with the GNote i717 JB release, many posted here, and quite a few here:
http://forums.att.com/t5/Android-Di...getting-Jelly-Bean-update/td-p/3421041/page/5
Including my own rant towards the bottom...
Needless to say, ill try and get on tomorrow to get the right links you will need, or some other kind sirs can...... either way, I have fallen asleep in the middle of writing this, so if something doesnt make sense... well, sleep writing was never my skill of choice
SGH-i717 HOME keys are not working...
Hammerfest said:
My work schedule is absolute hell, and due to people flaking at work I have been called in 2x to cover on my only days off...
Needless to say, im about to pass out, so im going to make this useless post...
Either I, or someone else can link you to a FJ rom, and the FJ alternate kernel that match, what you will need to do prior is make sure you have EVERYTHING you want/need, backed up to GMail (in the case of Phone logs, SMS and MMS with the Backup to GMail app, yes, im whoring this fantastic app out) AND to your computer, NO not your SD card, but your computer!
Make sure you have the latest recovery (TWRP 2.5.0.0 is what I have, but whatever TWRP is latest will do), wipe everything, then install the rom, boot, wait 10min, reboot into recovery, flash the alt kernel, boot, wait 10min, then test the home/back/menu/search key row, they should work, at this point, you CAN go back to the 2.x.x rom you where running, but if you have an i717, I have had nothing but love for the Stock rom update on AT&T once I performed a complete ODIN to it (flashing the ones here on the forum's resulted in random reboots here and there, and while less then ever before, still annoying, after an ODIN however, havent had a random reboot yet!).
There are issues with the GNote i717 JB release, many posted here, and quite a few here:
http://forums.att.com/t5/Android-Di...getting-Jelly-Bean-update/td-p/3421041/page/5
Including my own rant towards the bottom...
Needless to say, ill try and get on tomorrow to get the right links you will need, or some other kind sirs can...... either way, I have fallen asleep in the middle of writing this, so if something doesnt make sense... well, sleep writing was never my skill of choice
Click to expand...
Click to collapse
READY AND WAITING..THANX
Okay thank you for reply..I am ready to go with the install/flash...
When you get time to direct me to the correct ROM and Kernel i would be much obliged..In the meantime enjoy your rest..Cheers Mick
I'm having real issues trying to get a stock ROM on my Virgin Mobile S3 (GT-I9300) and I'm hoping you guys can help me. I've looked absolutely everywhere for a solution but so far nothing has worked.
OK so a little history about the problem:
Using phone as normal, and then randomly turns off. Turn it back on and I get the two Samsung splash screens loop booting constantly. I boot into recovery mode and do a factory reset - same problem. Clear the cache - same problem. Send phone back to Virgin and they tell me I've rooted and installed a custom ROM which I absolutely have not but they have a screenshot with the custom counter showing '1'.
I've no idea how this is possible, but I would have remembered if I'd installed a custom ROM. Anyway, they send it back because I'm not going to fork out £100 for them to flash it.
So...lots of research later, I download the latest Odin (3.09), find the most likely stock ROM that will work with my phone (Carrier is Virgin Mobile UK). I find this ROM on SamMobile: I9300XXUGMK6_I9300OXAGMK6_BTU. Cannot for the life of me find an actual Virgin rom so this apparently should be fine as it's a generic EU build.
Fine, so I apply it using the AP selection in Odin, connect phone, it goes through and applies fine "PASS" etc.. and phone reboots automatically.
Now, it just sits at the Samsung splash screen (the static white text) and doesn't go any further. I've left it upwards of 10 minutes but no dice. So look online and find threads that suggest booting to recovery and doing a factory reset will do the trick. So try that (Power+volume up+home) and same problem - static splash screen. Balls.
So now I don't know what to do. I either need to try an actual Virgin ROM which doesn't seem to exist(?!) or my phone is truely bricked and I'll finally have a good reason to destroy the thing.
Can anyone let me know what the next steps should be? I would be eternally grateful.
Thanks in advance.
I found the s3 to be a pain when doing a reset. Basically do it twice. Wipe, flash, wipe then boot. As far as I know btu is correct but virmin mobile used to rent their airspace from tmobile who are now half ee. Such a minefield..
Sent from my GT-I9300 using Tapatalk
shivadow said:
I found the s3 to be a pain when doing a reset. Basically do it twice. Wipe, flash, wipe then boot. As far as I know btu is correct but virmin mobile used to rent their airspace from tmobile who are now half ee. Such a minefield..
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
When you say 'wipe' do you mean factory reset via recovery mode? Because I'm not able to access that. All I can get to is Download Manager to use with Odin...
I thought you said you could access recovery and you had cleared cache. In that case you are buggered. If it goes through the flashing phase and reboots but you still cannot get into recovery then you have 3 options..
1. Flash another rom but no lower than 4.3. Carrier shouldn't matter.
2. Full on flash with pit file (dangerous and can perma brick).
3. Return the phone under warranty and state that the flash counter also clocks official flashes too, samsung should know this as they make the phone.. staff need training if they say otherwise.
Sent from my GT-I9300 using Tapatalk
Try the rescue firmware from general forum, follow the instructions exactly as it includes a pit.
It sounds like nand failure, so it's possible that you won't be able to fix it.
Sent from my GT-I9300 using Tapatalk
I thought you said you could access recovery and you had cleared cache.
Click to expand...
Click to collapse
Apologies for not being clearer, before sending it back to Virgin for the warranty repair I could access the recovery mode fine, when I got it back I couldn't - whether that was caused by the flashing of the firmware or something Virgin did I don't know unfortunately.
Try the rescue firmware from general forum, follow the instructions exactly as it includes a pit.
Click to expand...
Click to collapse
Thanks for the tip - I've flashed the stock recovery and I can now get into recovery mode! Looks slightly different but I can now access the factory reset/wipe cache options so that's some improvement.
I'm just downloading the stock international ROM as per this thread http://forum.xda-developers.com/galaxy-s3/general/fix-s3-to-factory-unroot-stock-recovery-t2323847 but it's going to take a few hours. Thanks so much for your advice so far i'll report back once the download completes.
No joy
I can however get into download mode and recovery mode now. Is there anything else I can try? Is it possible I can get a custom recovery image on there and flash it with something other than the stock rom?
I've got a feeling you're correct and it could be a hardware fault. Virgin say I can pay £100 to get it fixed, if they have to replace the entire phone that would prove it wasn't 'tampering' that caused it so I could potentially get my money back I guess, if I complained. I think that might be my only option now.
Ok I just booted into recovery mode and I was greeted with this error:
Any ideas what this could mean?
crispin85 said:
Ok I just booted into recovery mode and I was greeted with this error:
Any ideas what this could mean?
Click to expand...
Click to collapse
I say this to people who have this sort of problem but I mention the dreaded word and they tend to ignore it but will tell you what to try anyway.
Install Kies 3 for android 4.3 (there I said it Kies) on the top menu bar click Tools then Firmware Upgrade and Installation
Follow the on screen instructions, this process will wipe the phone and install the most up to date original carrier / phone firmware, after this the phone should work and you can then root, flash roms etc , it may work for you so try it, don't just dismiss it because it refers to the use of Kies
ag4751 said:
I say this to people who have this sort of problem but I mention the dreaded word and they tend to ignore it but will tell you what to try anyway.
Install Kies 3 for android 4.3 (there I said it Kies) on the top menu bar click Tools then Firmware Upgrade and Installation
Follow the on screen instructions, this process will wipe the phone and install the most up to date original carrier / phone firmware, after this the phone should work and you can then root, flash roms etc , it may work for you so try it, don't just dismiss it because it refers to the use of Kies
Click to expand...
Click to collapse
Unfortunately I've already tried Kies, and it doesn't recognise the device when in recovery mode.
crispin85 said:
Unfortunately I've already tried Kies, and it doesn't recognise the device when in recovery mode.
Click to expand...
Click to collapse
Make sure you are using the USB cable supplied with the phone and it is connected direct to your PC USB port, ideally the ones on the back but don't connect through any multi USB port connectors.
The USB cables and how you connect can make a difference