First of all, I'd like to apologize in advance if a similar thread has been made. I rooted my sister's SGS2. (i9100G) and she downloaded a ROM she said she wanted. Absent mindedly, I flashed it without knowing that it was an i9100 ROM. So it was stuck on the boot screen and I had to download an official GB firmware off sammobile.com . After I restored via Odin, her phone's vibration seemed to be lost. I tried calling her with vibration set to always and still no go. So is there anyone who knows the fix for this? It's pretty urgent because she's going back to her uni next week which is a few hours from where i am.. so yea. Any help would be very much appreciated!
you should root the phone, with any kernel that has CWMR.
then download any CWMR flashable rom. almost every coocked rom it is this way. place it in a folder inside your internal memory
Then in CWMR (volume up+home button+power button, when phone is off) you, wipe data/factory resets, wipe cache, wipe dalvik (sometimes is inside advance options), enter mounts&storage-->format /system
then choose select install zip from SD card. and select the rom u downloaded.
wipe cache and dalvik again
then go to reboot and see if it is fixed!
that should work...then u can flash any other rom trhough ODIN again
X10 mini pro
Unable to install any lower version of CM other than MiniCM10x
Able to flash the device with any Kernel
Unable to find busy box - message from FlashTool
Unable to Charge - red led blinks after 5 secs... Tried wipe battery status
after a long time it boots into MiniCM10 but battery does not charge
Able to boot to CWM recovery but uncertain when.....
MiniCM7.2.0 & 7.2.2+ Kernel nAa*11 & nAa*13 / 14 did not install, although the kernel could be flashed
Now trying to repair with SEMC software
Any Solution please or any similar case/error please let me know your solution
Photoneutron said:
X10 mini pro
Unable to install any lower version of CM other than MiniCM10x
Able to flash the device with any Kernel
Unable to find busy box - message from FlashTool
Unable to Charge - red led blinks after 5 secs... Tried wipe battery status
after a long time it boots into MiniCM10 but battery does not charge
Able to boot to CWM recovery but uncertain when.....
MiniCM7.2.0 & 7.2.2+ Kernel nAa*11 & nAa*13 / 14 did not install, although the kernel could be flashed
Now trying to repair with SEMC software
Any Solution please or any similar case/error please let me know your solution
Click to expand...
Click to collapse
read FAQ MiniCM10
Yenkazu said:
read FAQ MiniCM10
Click to expand...
Click to collapse
Thanks a lot:
i am trying to charge the battery with external source & insert...
i know that the performance of my phone was better with Android Gingerbread 2.3.7 mods - so wanted to go back...
i am not at all trying to hold any one responsible, i find it fun...
presently i want to end this by installing the one which was stable & fast for me.....
i have read the FAQ
any extreme suggestion too is welcome....:highfive:
Thanks to all Senior members & nAa
1. Install nAa 14 kernel with flashtool
2. Reboot the phone end immediately enter CWM
3. From Mounts and Storage menu, format /cache, /data and /system (you need to do that because the partition sizes are different between jb and gb)
4. From the advanced menu wipe dalvik cache
5. Do a wipe data/factory reset from the main menu
6. Reboot system and enter again CWM
7. Install the gb rom you like
it works
dimfil said:
1. Install nAa 14 kernel with flashtool
2. Reboot the phone end immediately enter CWM
3. From Mounts and Storage menu, format /cache, /data and /system (you need to do that because the partition sizes are different between jb and gb)
4. From the advanced menu wipe dalvik cache
5. Do a wipe data/factory reset from the main menu
6. Reboot system and enter again CWM
7. Install the gb rom you like
Click to expand...
Click to collapse
I have same problem, and your solution make it solved..
Thanks dude :good:
dimfil said:
1. Install nAa 14 kernel with flashtool
2. Reboot the phone end immediately enter CWM
3. From Mounts and Storage menu, format /cache, /data and /system (you need to do that because the partition sizes are different between jb and gb)
4. From the advanced menu wipe dalvik cache
5. Do a wipe data/factory reset from the main menu
6. Reboot system and enter again CWM
7. Install the gb rom you like
Click to expand...
Click to collapse
Thanks to B-Paul nAa & DarkDog & other contributors....
Thanks, but my problem seems to be in the micro USB port of the phone too. I have a doubt whether it can be replaced. Although it detects the cable but not most of the time. So I am using a external battery charger for time being.
The boot loader does not point to charging always even when its shutdown properly & plugged to charge, instead it goes to the CWM recovery. The last instruction is not registered well/properly instead it always tends to boot the OS or go to CWM Recovery....
I did not flash the 7.2.2 since I started to feel that the new Kernel from nAa jb.2 has improved the performance of memory handling a little & the home does not crash like the 7.2.0.
I have a very bad experience with the camera & video recording performance as mostly a noise band appears on the screen & photo comes black & video too comes same.... I think the driver for photo & video needs some more improvement...
Some apps gets into the phone memory for security or their code itself.........
Going to try some other ROM just for fun.......:laugh:
If we can make those /system & /data etc. virtual and we can add space from memory, performance could be improved
Looking forward for great ROMS in Windows8 style on X10 mini pro.
Hey,
First off i hope i have put this on the right sub forum.
I've been stupid (I Think) I've olso looked around on the forum and the [READ THIS] Got a Boot Loop? Don't post a New Thread!
topic.
I'm using my SGS2 for a year now and was using the ressurexionRimix rom for a while.
I've been plaing around with my phone so i got lots of folder that were not used etc, so I wanted to get it back to factory settings, here is when all went down.
Via Settings-Backup and recovery i gave my phone a factory reset (while using the latest ressurexionremix rom, i think this is the misstake i made) When my phone went into the reboot is got stuck on the splash screen, it kept reapeeting the boot animation.
The second mistake i mad was not puting back my back-up but thought well i want it back to it's first state so i'll use ODIN to flash the stock ROM onto it. now, 4 hours later and about 10 trys with diferent versions of the stock roms i'm still stuck on the boot screen.
I've also tryd flashing a cwm so i could get in cwm recovery, this also without any luck
Does anyone have a idea what to do!?
go back to recovery - mounts andstorage and format the following :
cache, system, data, sdcards if you have it in recovery. reboot
you have a bkank screen as your phone has been wiped. reboot into download mode.
Connect odin and flash a stock rom. reboot and your phone should work provided that you have not damaged the flash chip on the motherboard.
Is this in CWM? the problem is i dont have that anymore because i've flashed it toc stok. I now get in the Android system recovery
The option i get there ar:
Reboot system now
apply update from external storage
Wype data/factory reset
Wipe cache parition
apply update from cash
test redbend fola[FS]
Will try this, thank..will let you know if it worked
Wiped data/factory reset and cache after this i ebooted my phone and i got the message installing application, now i'm in the setup menu. Looks like it is working.
Did'nt realice there was a recovery besides CWM Thank yoy so much Cosmic Blue!!! You saved my life!!
This i9100g doesn't belong to me. It belongs to a friend..
Here's what he told me he did:
1)Did an OTA update to the GB stock ROM
2)Phone restarted and got stuck at the logo. (It was that way when I got the phone from him)
What I did to try and fix it:
1) Flashed a ClockWorkMod Recovery kernel (GT-I9100G_ICS_ClockworkMod-Recovery_6.0.1.2.tar) using ODIN
2) Data wipe .. Cache wipe .. Wipe /system /cache /data...Wipe Dalvik
3) Flashed CM10 (cm-10.0.0-i9100g)
4) Reboot System. It didn't work.
So again,
2) Data wipe .. Cache wipe .. Wipe /system /cache /data...Wipe Dalvik
3) Flashed CM9 (cm-9.1.0-i9100g.zip)
4) Reboot System. Things don't work out yet again.
Here's what happens:
Phone shows the exclaimation mark at boot along with the initial logo and goes directly into CWM recovery
I think this is because I am on a GB bootloader. How do I get an ICS bootloader? Is it safe to flash the stock ICS Rom over CM10 i.e., to follow this guide without messing things up (http://forum.xda-developers.com/showthread.php?t=1619571). Is there something that can be done apart from this to get CM10 working?
Hey guys,
I really need help about flashig a custom rom for my xperia mini. Because whenever i flash this custom rom(Zelly Cream) it successfully installed and i followed everything in the procedures given by the dev (wipe cahe/data/ format system etc) but the problem is when i reboot the system it wont go through the sony logo and i cant even access to the recovery. The only thing that i did is flashing again the stock firmware to fix the problem. But i want to use a custom rom. Need help guys! my mini is rooted, installed cwm 5.0, locked bootloader, stock kernel, build no. 587.
I would really appreciate if someone can help me.
Thanks in advance
Dont worry Bro!! i ve got The solution!!
The reason this happened is because u forgot to format system from mount and storage!! No big deal!!
Now since u have a locked bootloader in order to unbrick ur phone u have to download sony update Service from sony site...
n follow the Procedure On screen!!
n ull get stock official ICS!! n unbrick ur Phone!!
Dont Worry!
U have root ur Fone again!! :fingers-crossed:
Cheers!:good:
Do hit Thanks !! :cyclops:
---------- Post added at 08:28 AM ---------- Previous post was at 08:25 AM ----------
Zedfailon said:
Hey guys,
I really need help about flashig a custom rom for my xperia mini. Because whenever i flash this custom rom(Zelly Cream) it successfully installed and i followed everything in the procedures given by the dev (wipe cahe/data/ format system etc) but the problem is when i reboot the system it wont go through the sony logo and i cant even access to the recovery. The only thing that i did is flashing again the stock firmware to fix the problem. But i want to use a custom rom. Need help guys! my mini is rooted, installed cwm 5.0, locked bootloader, stock kernel, build no. 587.
I would really appreciate if someone can help me.
Thanks in advance
Click to expand...
Click to collapse
did u wipe Dalvik Cache!???
Are you sure you followed all the steps properly and you chose Xperia mini? Try it again
0. Locked Boot Loaders should Install CWM
1. Reboot to cwm.
2. Wipe data/factory reset.
3. Wipe cache partition.
4. Wipe dalvik cache under advanced menu.
5. Format data under mount and storage menu.
6. Format system under mount and storage menu.
7. Format cache under mount and storage menu.
8. Install zip from sd card.
9. Follow the steps in aroma installer to install the rom.
10. Untick Reboot Device when installation completed.
11. Go back to CWM & Reboot from there.
12. When System boots up go to Developer Option & Tick "Force GPU Rendering".
13. Active Users Flash Home_Key fix from Addon Section
Note: After installation, first boot may take several minutes (to create cache, dalvik cache etc.) to start your device. Leave your device for 20-30 minutes to settle down the rom. Also at first boot you may notice a high ram usages (less free ram). It is natural because android system occupy a lot of memory while settling down the new rom. After 30-40 minutes reboot your device and you are now ready to fly with your newly installed rom.
Click to expand...
Click to collapse
Sent from my SK17i running stock ics (.587)
yes
superRiyaz said:
The reason this happened is because u forgot to format system from mount and storage!! No big deal!!
Now since u have a locked bootloader in order to unbrick ur phone u have to download sony update Service from sony site...
n follow the Procedure On screen!!
n ull get stock official ICS!! n unbrick ur Phone!!
Dont Worry!
U have root ur Fone again!! :fingers-crossed:
Cheers!:good:
Do hit Thanks !! :cyclops:
---------- Post added at 08:28 AM ---------- Previous post was at 08:25 AM ----------
did u wipe Dalvik Cache!???
Click to expand...
Click to collapse
Yes i've followed every instruction. (wipe dalvik cache, cache, format system, format data) but still i cant go through the sony logo. Now my current rom is the stock rom ics build no. 587. Rooted and installed cwm
Btw, thanks for the reply
mihahn said:
Are you sure you followed all the steps properly and you chose Xperia mini? Try it again
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
Yes bro. I did it twice already and the same thing happened. I chose xperia mini and followed all other stuff in the aroma installer, untick the reboot device, etc. But still no luck of going through the sony logo. i've left my phone for over 1hour and its still in the sony logo.
Have you selected locked bootloader option in Aroma installer? I tried Zelly cream with Lupus kernel - it worked fine
z1WV said:
Have you selected locked bootloader option in Aroma installer? I tried Zelly cream with Lupus kernel - it worked fine
Click to expand...
Click to collapse
Yes i've selected it. And it still doesn't work. Any help? I really want to use that rom so bad.
Did you flash the kernel Included (or recomended) for your rom? because if you are stuck at a sony logo it seems to me that you still have stock kernel.
Edit: it seems that you have just hot boot the first kernel with recovery so when you boot again it just revert to stock Kernel.
That would explain why you can't access to recovery the second time.
You need to really flash the kernel:
1. Turn your phone off
2. Plus the usb Cable in While pressing volume up.
3. "fastboot flash boot boot.img" If you use fastboot in command line or "Select Kernel to Flash" button if you use fastboot in Flashtool.
Edit2: Ok I just realised that you have Locked bootloader so what i just told you won't work. Sorry.
Did you really follow step 10 and 11 and chose "reboot to system"?
The only thing I can think of would be to unlock your bootloader using mihahn thread http://forum.xda-developers.com/showthread.php?t=1879750 and then install a custom kernel.
tym0 said:
Did you flash the kernel Included (or recomended) for your rom? because if you are stuck at a sony logo it seems to me that you still have stock kernel.
Edit: it seems that you have just hot boot the first kernel with recovery so when you boot again it just revert to stock Kernel.
That would explain why you can't access to recovery the second time.
You need to really flash the kernel:
1. Turn your phone off
2. Plus the usb Cable in While pressing volume up.
3. "fastboot flash boot boot.img" If you use fastboot in command line or "Select Kernel to Flash" button if you use fastboot in Flashtool.
Edit2: Ok I just realised that you have Locked bootloader so what i just told you won't work. Sorry.
Did you really follow step 10 and 11 and chose "reboot to system"?
The only thing I can think of would be to unlock your bootloader using mihahn thread http://forum.xda-developers.com/showthread.php?t=1879750 and then install a custom kernel.
Click to expand...
Click to collapse
Thanks for the reply bro, yeah but it is said in the rom that it works with stock kernel. I dont want to unlock my bootloader maybe i'll brick my phone and i don't know how to fix that. I'm pretty sure that i've followed every steps given by the dev but still the same thing happened. Now, i tried to flash the stock kernel and root again and install cwm again then i tried to flash the custom rom via cwm and followed every steps then reboot. And still it wont go through the sony logo. really need help guys!
Zedfailon said:
Thanks for the reply bro, yeah but it is said in the rom that it works with stock kernel. I dont want to unlock my bootloader maybe i'll brick my phone and i don't know how to fix that. I'm pretty sure that i've followed every steps given by the dev but still the same thing happened. Now, i tried to flash the stock kernel and root again and install cwm again then i tried to flash the custom rom via cwm and followed every steps then reboot. And still it wont go through the sony logo. really need help guys!
Click to expand...
Click to collapse
When you have 10 posts you may ask in the dev thread, maybe there's a little step we all missed and so it's not working
Sent from my SK17i running stock ics (.587)
mihahn said:
When you have 10 posts you may ask in the dev thread, maybe there's a little step we all missed and so it's not working
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
yeah i've never seen a feedback from people that's using the zelly cream rom with a stock kernel, maybe the problem is with the stock kernel. Now i'll try some other custom roms out there maybe they'll work with the stock kernel and a locked bootloader.
Thanks for the support guys!
BTW superRiyaz, mihahn,z1WV,tym0
Hey guys! i've made the rom working for my xperia mini! all i did is install again and follow again the instructions! i don't why the third time i tried to install this rom is working! I did all the same steps again and im shocked that it go through the sony logo!
anyways thanks for cooperating guys! you got my thanks! i'm done with my problem!
Edit: Sorry didn't see the above post. Happy you solved your problem.
tym0 said:
Edit: Sorry didn't see the above post. Happy you solved your problem.
Click to expand...
Click to collapse
yeah thanks anyway
mihahn said:
Are you sure you followed all the steps properly and you chose Xperia mini? Try it again
Sent from my SK17i running stock ics (.587)
Click to expand...
Click to collapse
Hi, the first time i tried this i only wiped data/factory reset and nothing else, so when i rebooted from recovery mode i got stuck at sony logo. Took me some time to fix everything (flash stock ICS on device, root phone and install cwm again).
Now i did all this:
0. Locked Boot Loaders should Install CWM
1. Reboot to cwm.
2. Wipe data/factory reset.
3. Wipe cache partition.
4. Wipe dalvik cache under advanced menu.
5. Format data under mount and storage menu.
6. Format system under mount and storage menu.
7. Format cache under mount and storage menu.
8. Install zip from sd card.
9. Follow the steps in aroma installer to install the rom.
10. Untick Reboot Device when installation completed.
11. Go back to CWM & Reboot from there.
12. When System boots up go to Developer Option & Tick "Force GPU Rendering".
13. Active Users Flash Home_Key fix from Addon Section
Now when i rebooted from CWM (recovery mode) the sony logo appears for about 10 sec, than disappears for about 5-10 sec, and it's doing this over and over again for about 10min now.
Any ideas ?
ur000s said:
Hi, the first time i tried this i only wiped data/factory reset and nothing else, so when i rebooted from recovery mode i got stuck at sony logo. Took me some time to fix everything (flash stock ICS on device, root phone and install cwm again).
Now i did all this:
0. Locked Boot Loaders should Install CWM
1. Reboot to cwm.
2. Wipe data/factory reset.
3. Wipe cache partition.
4. Wipe dalvik cache under advanced menu.
5. Format data under mount and storage menu.
6. Format system under mount and storage menu.
7. Format cache under mount and storage menu.
8. Install zip from sd card.
9. Follow the steps in aroma installer to install the rom.
10. Untick Reboot Device when installation completed.
11. Go back to CWM & Reboot from there.
12. When System boots up go to Developer Option & Tick "Force GPU Rendering".
13. Active Users Flash Home_Key fix from Addon Section
Now when i rebooted from CWM (recovery mode) the sony logo appears for about 10 sec, than disappears for about 5-10 sec, and it's doing this over and over again for about 10min now.
Any ideas ?
Click to expand...
Click to collapse
Which phone are you using?
Sent from my Nexus 4 running Android 4.3
mihahn said:
Which phone are you using?
Sent from my Nexus 4 running Android 4.3
Click to expand...
Click to collapse
SE wt19i
ur000s said:
SE wt19i
Click to expand...
Click to collapse
Why did you flash the active user home button fix? It's for Xperia active st17 users! I guess that's the problem
Reinstall the rom like you did before and don't flash the active fix! It should work fine
Sent from my Nexus 4 running Android 4.3
mihahn said:
Why did you flash the active user home button fix? It's for Xperia active st17 users! I guess that's the problem
Reinstall the rom like you did before and don't flash the active fix! It should work fine
Sent from my Nexus 4 running Android 4.3
Click to expand...
Click to collapse
I actually didn't do that, because when i reboot from CWM (after installing rom) that's where the sony logo flashes in about 10s intervals.
unable to install custom rom
Hi guys..Currently I'm using "Sony Ericsson Xperia Mini Pro".I have rooted my phone by "Flash Tool" for Sony, I also unlocked my bootlocker too that time.
After the rooting process has been finished I have installed "ROM manager" from Play Store. Then I install "CWM v5.0.2.7" via ROM manager. But the whole problem is that now i can't istall custom ROM for my device. Because in the CWM recovey menu it is showing "Xperia Arc[v03] {ICS}".
I am able too wipe factory data, cache and delvik cache, it is also showing installation process of custom rom.After the installation process completed, my phone is not booting into Custom Rom. Its repeatedly showing sony icon, then it is automatically rebooting. I took back up for my phone also,and I can also recover from that.Also I tried "X-parts" app from play store, and installed cwm for xperia 2011 series. But the same "Xperia Arc" is showing till now.
note: I followed all the steps[/B]