Related
Its a good news and i m not a dev but i hope this helps devs in porting ICS to our phones !
Qualcomm released drivers for ICS for Adreno 2xx series .our O1's for Adreno 200 .
the links
http://phandroid.com/2012/03/17/adreno-2xx-drivers-for-ics-made-available-by-qualcomm/
https://developer.qualcomm.com/develop/mobile-technologies/gaming-graphics-optimization-adreno/tools-and-resources
Again? Man if you read the threads you wilk know that those drivers is only for armv7... no for armv6
Sent from my Supercalifragilisticexpialidocious ICS powered LG-P500 using an always FC XDA app
Could someone please ask a MODERATOR to delete this thread.
It has been mentioned many time that these lib are compiled for ARMv7 QSD series and not ours ARMv6 MSM7227.
Also this is not to be posted here in this section. You are not developing anything
So this can be help devs porting ICS for GT-S8600? because he have also Adreno 205 Gpu.So im think it can be help anyway with GT-S8500/GT-S8530
You mean this?
http://www.xda-developers.com/android/qualcomm-releases-adreno-2xx-gpu-binaries-for-ics/
lead to this?
https://developer.qualcomm.com/deve...phics-optimization-adreno/tools-and-resources
Best Regards
all links xD
but better 2 link
Hi folks,
the last rooted ROM at the moment is 4.0.26 which surdru_petru rooted for us, thanks !
Unfortunately surdru_petru had to change his device
He also left a 3.0.21+ overclocked kernel which was needed for 4.0.25.
1. Can I use this kernel also for the 4.0.26 without loosing improvements done by Archos on 4.0.26 ?
I have a Archos 80 G9 with a OMAP4460 ES1.1 on 1.2 GHz default clock.
Can anybody give me detailed hints how to do a overclock myself (nevertheless which Archos ROM to be used) ?
I read aboud a thread win tun.ko . Maybe it's the same way sudru_petru did the overclocking ...
2. Can I extract kun.to file(s) from sudru_petru kernel 3.0.21+ and copy it to my 4.0.26 (or maybe also later roms) ?
I also read about a possibility to patch configuration parameters of the Archos in order to do set permanent max. clock rate (e.g.1.5GHz for my device)
3. Did anybody this patching for a Archos 80 G9 with OMAP4460 ES1.1 ? Which adresses to be patched with what value ?
Thanks for reading and maybe some helpful comments
Cheers
hansi_schulz
The over clocking is applied to kernel on the source, so you can't just simply patch it to ROM.
As far as I know, 3.0.21 over clock kernel should work on 4.0.26. All the changes that are on the system will be kept, but you lose kernel changes. I believe most of the changes are on system, and will stay because of it.
Tun.Ko is a module required by vpns, like openvpn.
"The tun.ko file is a device driver(module) that provides packet reception and transmission for user space programs." Source: http://droidvpn.com/page/what-is-the-use-of-tunko-1/
In over clock kernel you can rise your clock speed, but it won't be permanent. I haven't heard of a patch like that.
Sent from my GT-I9100 using xda app-developers app
tun.ko and permanent oc patch/tweak
concerning tun.ko and oc i read about in
http://forum.xda-developers.com/showthread.php?t=1551121
concerning the permanent patching i read in
http://forum.xda-developers.com/showthread.php?t=1711864
cheers
hansi_schulz
hansi_schulz said:
concerning tun.ko and oc i read about in
http://forum.xda-developers.com/showthread.php?t=1551121
concerning the permanent patching i read in
http://forum.xda-developers.com/showthread.php?t=1711864
cheers
hansi_schulz
Click to expand...
Click to collapse
In the first link, it has overclock kernel with tun.ko support, but not overclocking by using tun.ko.
The second link might work, but I would personally prefer the kernel method. But it is your choice if you want to "fake" your device.
Sent from my GT-I9100 using xda app-developers app
julle131 said:
In the first link, it has overclock kernel with tun.ko support, but not overclocking by using tun.ko.
The second link might work, but I would personally prefer the kernel method. But it is your choice if you want to "fake" your device.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I have a device which is from hardware point of view the same as the 1,5GHz turbo version.
The nicest thin to do would be setting the flag(s) from a 1,2 GHz to a 1,5GHz model so I don't have to care about OC versions anymore.
Just need a rooted ROM ...
So it seems that anybody would share their experience concerning the second link ?
overclocked 4.0.26 with tag file
With the kind support of scholbert I have now oc my Archos 80 G9 OMAP 4460 ES1.1 8GB flash 512MB RAM from 1,2GHz to 1,5GHz by just setting a flag in the tag file.
The detailed description to be found in
http://forum.xda-developers.com/showthread.php?t=1711864
But beware !
You may brick your device permanentely !
I just found a way to overclock the GPU on all xperias. Need some testers, but remember, it might damage your device!
I will releasing here test kernels for X8, but these MIGHT DAMAGE your devices, so you flashing on your own.
XDA:DevDB Information
Pepejson-Kernel, a Kernel for the Sony Ericsson XPERIA X8
Contributors
mamutos
Kernel Special Features:
Version Information
Status: Testing
Created 2013-11-05
Last Updated 2013-11-05
I compiled the first version, but have probably a bad ramdisk, not even the logo shows up and gets into bootloop.
I need nAa-jb-06 ramdisk. @nobodyAtall Can you share it with me ?
Thanks.
1. We need a "little bit" more information about this project
2. The kernel is GPL protected, need the source (to identify what is your work and who worked with the kernel earlier)
3. The "original development" section need at least one idea what not exists on this device.
4. The "GPU overclock": with the msm7x27 SoC, the GPU clock is LOCKED, always run on the axi bus speed, you can't set it separately. You can set the GPU speed if you play with the axi bus speed in the acpuclock.c, but this is not a new idea.
5. The overclock of the GPU in our msm7227 SoC is theoretically unusable, because our adreno200 is cpu limited in most case. Just check the same gpu in the qsd8250, and you can see, with more powerful cpu this gpu can perform much better (on same clock)
This is NOT an offense, I just point to some thing before tons of idiot questions arrived about the project.
So, better if you correct the opening post and give the required informations, and folloew the forum rules (before you get a warning from a moderator, for example: due the missing sources)
PS.: you can cut the ramdisk from the precompiled nAa-06 kernel. I you have the knowledge to make new gpu overclock method, this is easy work...
PS.2.: Okay, just find the lz4 header in the kernel.sin, and delete everything before this and you can get the original nAa-06 ramdisk
Last note: maybe I wrote incorrect informations, the more experienced members/developers can correct it.
EDIT: the to overclock the gpu on all xperias is nonsence, because the xperia family have different gpus. (the most is adreno powered, but the phones with novathor SoC have Mali 400MP, or the xperia C have PowerVRSGX544)
I don't understand this kind of thread , first test then post it and do a favor for all do not create it in original DEV section this is not belong here .
Thanks whore?
Sent from my E15i using Tapatalk 2
pilu1978 said:
4. The "GPU overclock": with the msm7x27 SoC, the GPU clock is LOCKED, always run on the axi bus speed, you can't set it separately. You can set the GPU speed if you play with the axi bus speed in the acpuclock.c, but this is not a new idea.
Click to expand...
Click to collapse
I don't knew that. Sorry
Topic to remove.
Yet again this highlights the fragmentation of development here.
@op - I you had performed a search or even browsed here a little you would seen active kernel development.
You unwillingness to ask to join such a group of guys or even just post in their threads to contribute leads me to thinking you're a glory hunter.
And then when you ask nAa to just send you his ramdisk I honestly nearly wet myself.
Thanks for the laugh chap - I'm even gonna thank you for it
Q&A for [KERNEL][CM] ALPHA Kernel 0.4 update [nov 11-2014]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][CM] ALPHA Kernel 0.4 update [nov 11-2014]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
WiFi not working when flashed on Paranoid Android 4.6(Beta 5)
Hello, I have flashed this kernel over Paranoid Android's Fresh installation but as I try to turn on wifi,it keeps displaying that 'wifi is turning on' and it keeps displaying like forever, I have even tried wiping data,cache and dalvik cache after flashing but the problem is still persisting,
I request you to please suggest me what should I do to make this kernel work.
thank you
yashmendhe said:
Hello, I have flashed this kernel over Paranoid Android's Fresh installation but as I try to turn on wifi,it keeps displaying that 'wifi is turning on' and it keeps displaying like forever, I have even tried wiping data,cache and dalvik cache after flashing but the problem is still persisting,
I request you to please suggest me what should I do to make this kernel work.
thank you
Click to expand...
Click to collapse
I dont know what the specified rom is based on , cm or aosp ?
I have cyanogen mod. Rc1. The WiFi wouldn't turn on. I had flashed the v0.5
Sent from my XT1022 using XDA Free mobile app
Would like to help test this build, but I'm pretty new to smartphones in general
I managed to install CM11 via step-by-step instructions, but that's about it.
Would you recommend against doing something as advanced as custom kernels at that early stage of learning?
If you think it's not too difficult to pull off, I'd be grateful for instructions.
Radio Projection said:
I managed to install CM11 via step-by-step instructions, but that's about it.
Would you recommend against doing something as advanced as custom kernels at that early stage of learning?
If you think it's not too difficult to pull off, I'd be grateful for instructions.
Click to expand...
Click to collapse
If u like experimenting, go on and do it. XD to flash the kernel just do a backup of boot.img in TWRP recovery, then flash the kernel, if you dont like it, just restore the boot.img. Its easy. Im new to all this too
trickster mod gpu governor
Can't find the option to change GPU frequency in trickster mod. Its been said that after flashing the alpha .7 kernel in moto e running cm11 GPU can be over clocked. But I can't find the option to do so. Pls help me on this...
bovershook said:
Can't find the option to change GPU frequency in trickster mod. Its been said that after flashing the alpha .7 kernel in moto e running cm11 GPU can be over clocked. But I can't find the option to do so. Pls help me on this...
Click to expand...
Click to collapse
same here, in trickster mod only few options avaible, like dt2w and sound control....
So eager to overclock moto e GPU and RAM
[KERNEL 3.4.104][CM] ALPHA Kernel 0.7 update[nov 17-2014]
(use Trickster mod kernel to avail some of the features)
-Intelli Hotplug v3.8 (for better battery perf)
-Intelli Thermal v2 thermal manager.
-Ram OC to 400mhz from 333mhz
-gpu OC to 433mhz from 400 mhz
[/B][/U]-cpu underclock upto 91mhz (good battery life)
-Sound control 3.4
How to get that RAM and GPU frequency? Is it overclocked by default in this kernel or should we manually do it if so how?
I can't post the issue in the latest thread since I am a junior member. Here nobody answers the question. Really sad. Please take this post to the main thread...
eager to overclock moto e GPU and RAM
[KERNEL 3.4.104][CM] ALPHA Kernel 0.7 update[nov 17-2014]
(use Trickster mod kernel to avail some of the features)
-Intelli Hotplug v3.8 (for better battery perf)
-Intelli Thermal v2 thermal manager.
-Ram OC to 400mhz from 333mhz
-gpu OC to 433mhz from 400 mhz
[/B][/U]-cpu underclock upto 91mhz (good battery life)
-Sound control 3.4
How to get that RAM and GPU frequency? Is it overclocked by default in this kernel or should we manually do it if so how?
bovershook said:
eager to overclock moto e GPU and RAM
[KERNEL 3.4.104][CM] ALPHA Kernel 0.7 update[nov 17-2014]
(use Trickster mod kernel to avail some of the features)
-Intelli Hotplug v3.8 (for better battery perf)
-Intelli Thermal v2 thermal manager.
-Ram OC to 400mhz from 333mhz
-gpu OC to 433mhz from 400 mhz
[/B][/U]-cpu underclock upto 91mhz (good battery life)
-Sound control 3.4
How to get that RAM and GPU frequency? Is it overclocked by default in this kernel or should we manually do it if so how?
Click to expand...
Click to collapse
Try to increase post count to 10 by helping others i the General and Q&A sections....
Once you've got 10 counts under your belt, you'll be promoted to Member and you can post in the development threads...
BTW, don't remember the magical no. is 10 or 25...
Check the warning message during posting and you'll know... :good:
Thanks...thanks a lot..
bovershook said:
[KERNEL 3.4.104][CM] ALPHA Kernel 0.7 update[nov 17-2014]
(use Trickster mod kernel to avail some of the features)
-Intelli Hotplug v3.8 (for better battery perf)
-Intelli Thermal v2 thermal manager.
-Ram OC to 400mhz from 333mhz
-gpu OC to 433mhz from 400 mhz
[/B][/U]-cpu underclock upto 91mhz (good battery life)
-Sound control 3.4
How to get that RAM and GPU frequency? Is it overclocked by default in this kernel or should we manually do it if so how?
Click to expand...
Click to collapse
Trickster mod has the option to OC.
I don't remember exactly, but its a value on the scale of percentage. (100 being default).You need to change it in steps (usually by 1).
Google how to use trickster mod. Or try any other GUI based CPU app. Most apps support CPU OC if the kernel supports it.
Ps: Its been long since I used Trickster mod and OC'd. So it might be a lil different than I remember.
Also, to enable OC, you might have to disable Battery Saver.
This section went out of my sight , i will check it regularly from here on :good::good::good:
I downloaded the latest trickstermod and installed. Checked the tutorial too. In tutorial I saw the overclocking slider and stuff. But with this kernel I couldn't see any option like that in trickstermod. Its been said that we can underclock RAM frequency too in the kernel features. GPU tweaking is also another feature of this kernel. But I am unable to use these options with trickstermod. Can this be done with any other app supporting this kernel?
If so pls help me out with app link and screenshots.
Thanks a lot for your response...waiting to overclock...
Root Problem
I somehow lost root permissions and SuperSU says binary cannot be installed. Happened after i flashed this kernel. If anybody faced such problem and got a solution please help me out with it :'(
DemonReborn said:
I somehow lost root permissions and SuperSU says binary cannot be installed. Happened after i flashed this kernel. If anybody faced such problem and got a solution please help me out with it :'(
Click to expand...
Click to collapse
+1 i got the same problem & only after flashing this kernel...
any ideas how to fix root?
tried installing su binary through twrp & it installs fine but when launched super su says no binary is installed.
Digital TV and root access does not work.
Digital TV does not work, so I installed this kernel I lost root access , I did the flash SuperSu.zip again , but still no root access ..: c
i suppose , the root problems arent occuring anymore