Related
HERE IS WHAT I DID ..
UNLCOCKED BOOTLOADER WITH DOS PROGRAM
-downloader rom manager and flashed cwm but anytime i turn off the phone and boot into recovery it shows a exclamation point if i dont flash cwm and do recovery through rom manager and i have to flash cwm from rom manager everytime i need to go into recovery which i know is not right.
- do i need to flash Cyan 5.0.2.3-atrix4.1 / ZIP version. to have a recovery so i can do back ups?
- and also i just downloaded the cm7 zip, do i unzip on my sd card copy to internal or just throw the zip on and copy?
-when i was able to get in to recovery after flashing cwm the beta.zip does not show in the internal or the sd card since it copied to both so im not sure if i need to flash that recovery i posted above to see the zip or not? if you could help answer these i would appreciate it.
love,
the noob
twayneo said:
HERE IS WHAT I DID ..
UNLCOCKED BOOTLOADER WITH DOS PROGRAM
-downloader rom manager and flashed cwm but anytime i turn off the phone and boot into recovery it shows a exclamation point if i dont flash cwm and do recovery through rom manager and i have to flash cwm from rom manager everytime i need to go into recovery which i know is not right.
- do i need to flash Cyan 5.0.2.3-atrix4.1 / ZIP version. to have a recovery so i can do back ups?
- and also i just downloaded the cm7 zip, do i unzip on my sd card copy to internal or just throw the zip on and copy?
-when i was able to get in to recovery after flashing cwm the beta.zip does not show in the internal or the sd card since it copied to both so im not sure if i need to flash that recovery i posted above to see the zip or not? if you could help answer these i would appreciate it.
love,
the noob
Click to expand...
Click to collapse
ok youve got a lot going on there
first things first. CM7 changes the storage locations for the SD cards so thats why you cant see those
the reason cm7 isn't booting is because you were using the wrong recovery. you need to fast boot flash romracers latest recoverhy for that to work.
that should also fix hour disappearing recovery problem,
id reccomend using a fruitcake to get back to stock and starting over
ok so i have only unlocked the bootloader nothing else im trying to get a recovery so i can actually put the cm7 zip in so i can flash to recovery. so i should flash rom racers recovery? and then do i flash cwm after i have the recovery, because the cm7 directions say too do so. i sincerely appreciate you helping me
I've searched and can't seem to find exactly what I'm looking for so a little help would be awesome. I unlocked, rooted, installed TWRP, created backup, then flashed AOKP's Build 39 to Prime. It was rebooting then entering boot loop. I went into TWRP and after some misunderstandings WIPED SYSTEM DATA. Now I think I'm screwed. When you turn it on it enters Eee Pad screen and stays. I can manually enter TWRP and also the Fastboot screen (which is where I think I can fix this thing) but I have no idea what to do next. I am searching but still haven't found the right answer. If anyone has a clue please give me your insight, I'm pretty unsure of what move I should make next. Thanks!
Also, I'm pretty sure I need to push files using ADB/Fastboot... Is this correct and if so which files will I need to push...
I do have ROM/Gapps on external SD but of course that isn't booting, FYI.
Just flash aokp again and factory reset in twrp
Sent from my sgs2 running cm9
Makrilli said:
Just flash aokp again and factory reset in twrp
Sent from my sgs2 running cm9
Click to expand...
Click to collapse
___
How can I flash the AOKP ROM again if I can't seem to find it within any directory? See that's my issue, I don't have the zip file anywhere when I use File Manager within TWRP Recovery. I think the only thing left on my Prime is the boot img for TWRP, nothing else. I need to know how to push the ROM back onto the Prime... Keep in mind I don't have a way to boot the system because I wiped the system.
I created this thread because I have looked all over and have been unable to find someone with the exact same issue(s).
I said "sort of" in the title because twrp is working. Ok, so before everyone asks if I have nvflash, the answer is no. I did not have the right version of firmware, and did not try to install it originally. Since I was able to install roms, I figured I was fine...oops.
Twrp is not properly installing roms. More on that later. I am getting to the asus splash screen that says my device is unlocked, but it is stuck there.
My last working rom was the deodexed stock JB rom from craig gomez. I installed it with goo and when I installed that, I lost custom recovery and root, so I decided to go back to a more custom rom so Titanium backup would work. When I did that, I tried also tried again to make nvflash work. I got through the first step, it said it was successful, except I never got the little message in the upper left corner that I was supposed to get. I did not think it was a big deal because my prime would still boot like normal.
Then I installed twrp 2.3.1.0 and I have tried flashing previous restore images. I have tried installing the roms on my sdcard. I cannot get past the asus splash screen.
If I try installing a rom with the force md5 check enabled, it does detect an md5 and then quits.
If I try intalling a rom without the force md5 check, i get an error that says E:Unable to mount '/staging'
When I try installing a backup everything seems to work okay, but then I get the same error E:Unable to mount '/staging'
When I try to install roms through fastboot, I get the following errors:
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
When I try using adb, I do not see any devices.
I tried putting CWM on the prime to see if I could install from that instead, but it would not load after install.
I tried putting an older version of twrp on the prime, to see if that was the issue because I used to have an older version...I could not get that to load either...so I went back to this version.
Any ideas or suggestions would be awesome guys. I am stuck.
I even went to install the naked drivers again, and when I try to flash a different recovery, I get the <waiting for device> text that never goes away.
i'm sort of on the same boat. my prime just keeps booting into twrp recovery no matter what i tried. i'm still hoping to find a solution to this problem.
godlyitem said:
i'm sort of on the same boat. my prime just keeps booting into twrp recovery no matter what i tried. i'm still hoping to find a solution to this problem.
Click to expand...
Click to collapse
For me, I can let it try to boot normally, but I get stuck at the splash screen. This device is unlocked.
If I hold down the volume down button, I can go to fastboot, or RCK for recovery...but it does not work properly.
big time noob said:
For me, I can let it try to boot normally, but I get stuck at the splash screen. This device is unlocked.
If I hold down the volume down button, I can go to fastboot, or RCK for recovery...but it does not work properly.
Click to expand...
Click to collapse
i just tried to flash cwm in the terminal, it wrote stuff on the memory, but didn't seem to do anything. it booted straight back to twrp. i can't even get it to go to fastboot!!! only if i can go to fastboot, i could save my prime!!!
godlyitem said:
i just tried to flash cwm in the terminal, it wrote stuff on the memory, but didn't seem to do anything. it booted straight back to twrp. i can't even get it to go to fastboot!!! only if i can go to fastboot, i could save my prime!!!
Click to expand...
Click to collapse
Yeah, I thought that too, but fastboot does not work properly either...argh. I wish one of the gurus would chime in here.
Same Here.. It all happened when i restored my files using titanium backup and when i rebooted im stuck at boot scrren
EDIT: Guys I did a prime fullwipe and flashed stock jb and now prime is restored to its original state..
""I also got some errors like md5 file could not be found and could not find the /staging""..but after the reboot it works perfect
EDIT 1: Now after the prime fullwipe and flashing stock jb i flashed twrp recovery and now it works perfect without a single error even the above mentioned errors were gone
mercydia said:
Same Here.. It all happened when i restored my files using titanium backup and when i rebooted im stuck at boot scrren
Click to expand...
Click to collapse
EVERYONE i fixed it!!!!!!!!!!!!!!!!!! !!!! it's alive again!!!!!!!!!!!!!!!!!
godlyitem said:
EVERYONE i fixed it!!!!!!!!!!!!!!!!!! !!!! it's alive again!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
That doesn't really help us. If possible, can you edit/delete your message so that the guys that might help do actually help? Don't want them to think this is done.
Can you clarify what the Prime fullwipe is and how you got there?
I do not know if it will help me.
I can't even do the wipe command from fastboot.
Just says <waiting for device>
I have tried the wipe command form the boot screen (the one with fastboot and RCK as options), that did not work properly either.
Ryan
mercydia said:
Same Here.. It all happened when i restored my files using titanium backup and when i rebooted im stuck at boot scrren
EDIT: Guys I did a prime fullwipe and flashed stock jb and now prime is restored to its original state..
""I also got some errors like md5 file could not be found and could not find the /staging""..but after the reboot it works perfect
EDIT 1: Now after the prime fullwipe and flashing stock jb i flashed twrp recovery and now it works perfect without a single error even the above mentioned errors were gone
Click to expand...
Click to collapse
big time noob said:
Can you clarify what the Prime fullwipe is and how you got there?
I do not know if it will help me.
I can't even do the wipe command from fastboot.
Just says <waiting for device>
I have tried the wipe command form the boot screen (the one with fastboot and RCK as options), that did not work properly either.
Ryan
Click to expand...
Click to collapse
here is what i did. get into twrp recovery. flashed full prime wipe -> right after that flash the stock jb US version directly dled from Asus -> reboot then you will be stuck at the splash screen (that's a good news). Hold down power + volume down until your prime turns off and restart (keep holding those two keys) until the 3 icons appear then flash w/e rom you want in recovery. It's alive!
In twrp I do not see anything that says Full Prime Wipe. I see something that says wipe. Are those the same? I tried doing a wipe from this screen, but it did not work for me as expected.
godlyitem said:
here is what i did. get into twrp recovery. flashed full prime wipe -> right after that flash the stock jb US version directly dled from Asus -> reboot then you will be stuck at the splash screen (that's a good news). Hold down power + volume down until your prime turns off and restart (keep holding those two keys) until the 3 icons appear then flash w/e rom you want in recovery. It's alive!
Click to expand...
Click to collapse
big time noob said:
In twrp I do not see anything that says Full Prime Wipe. I see something that says wipe. Are those the same? I tried doing a wipe from this screen, but it did not work for me as expected.
Click to expand...
Click to collapse
no full wipe is a stand alone zip file you have to google and find dl it. put it in your prime then flash it
Thanks. That is what I needed to know.
I will see if I can make this work when I get back from work.
godlyitem said:
no full wipe is a stand alone zip file you have to google and find dl it. put it in your prime then flash it
Click to expand...
Click to collapse
I am pretty sure I am F***ed.
I tried the prime full wipe. It worked the first time, I think. Then went to install a rom.
I had to do both through external SD in twrp because my adb is not working. Also, fastboot only works to install a recovery. The only version of any recovery I can make work is twrp 2.3.1.0
If I try an older version or CWM, it freezes where I try to go into recovery.
Unable to mount data error.
Unable to mount system error.
Same as before.
I tried using unbricker software I found, but since adb does not work properly, the software does not work properly.
I am going to see if I can work my charm and get them to take back my tablet at best buy for an infinity. I have read about other people pulling it off.
I think as we get closer to xmas my odds improve...UNLESS SOMEONE HAS ANOTHER IDEA??? I would love to try something else.
Eyeballer suggested a chat room channel thing, but most of the people are in europe and I would need to do it in the morning...I do not have time for that, but I may try it.
big time noob said:
Can you clarify what the Prime fullwipe is and how you got there?
I do not know if it will help me.
I can't even do the wipe command from fastboot.
Just says <waiting for device>
I have tried the wipe command form the boot screen (the one with fastboot and RCK as options), that did not work properly either.
Ryan
Click to expand...
Click to collapse
Download the zip:
http://goo.gl/hiFHB
Goto to Twrp recovery and install the zip..Since it supports microsd u can transfer the zip to microsd.
Goto TWRP -> INSTALL -> CHOOSE EXTERNAL SD -> INSTALL THE ZIP
It will completely wipe the internal storage and then download the official STOCK JB FROM ASUS SITE and follow the same steps to install. Now install the latest twrp recovery using fastboot
big time noob said:
I am pretty sure I am F***ed.
I tried the prime full wipe. It worked the first time, I think. Then went to install a rom.
I had to do both through external SD in twrp because my adb is not working. Also, fastboot only works to install a recovery. The only version of any recovery I can make work is twrp 2.3.1.0
If I try an older version or CWM, it freezes where I try to go into recovery.
Unable to mount data error.
Unable to mount system error.
Same as before.
I tried using unbricker software I found, but since adb does not work properly, the software does not work properly.
I am going to see if I can work my charm and get them to take back my tablet at best buy for an infinity. I have read about other people pulling it off.
I think as we get closer to xmas my odds improve...UNLESS SOMEONE HAS ANOTHER IDEA??? I would love to try something else.
Eyeballer suggested a chat room channel thing, but most of the people are in europe and I would need to do it in the morning...I do not have time for that, but I may try it.
Click to expand...
Click to collapse
When I was doing the fullwipe the same errors happened to me.. But dont mind..I got errors like
1. No md5 file found
2. Mount error
3. Cannot find /staging
Just follow the above the steps ull get it right
did you even follow my step by step guide? you can move the stock rom from external SD to your internal SD in advance -> file manager.
godlyitem said:
did you even follow my step by step guide? you can move the stock rom from external SD to your internal SD in advance -> file manager.
Click to expand...
Click to collapse
Yeah, I should have said I tried that first. I also tried the stock rom from asus. When that didn't work, I tried the stock rom deodexed I found in goo.
There are a bunch of permission errors going on inside my prime. When I go into the mount area, it will not let me mount the data to move it. Or, when I try to copy it over I get a failed message.
Okay. I wiped it again, from twrp.
Then it let me move the file from the ext-sdcard to the sdcard.
I used the prime full wipe.
Then I tried to install the stock rom by transferring it in twrp file manager.
I got the file onto the sdcard, but when i tried to install, it said Failed.
That was it.
I even tried installing the ICS version I got from ASUS. Same thing.
Now, I am going to try to access via unbricker...don't know if it will work, but I am out of ideas.
godlyitem said:
did you even follow my step by step guide? you can move the stock rom from external SD to your internal SD in advance -> file manager.
Click to expand...
Click to collapse
Fixed?
I am alive!
us-tf201-jro03c-10.4.2.15-stock-deodexed.zip
That is the last rom I successfully used.
I used all sorts of different wipes. I was in twrp and noticed my pc installing the transformer adb driver. So I hopped into adb to see if it would see my device with that driver. (it did, but it wasn't before from the fastboot or adb commands with naked driver).
I tried sideloading the above rom from twrp. It worked.
Thought others might want to know.
I do not know if I can install other roms or not. I am a little scared to try just yet.
big time noob said:
Okay. I wiped it again, from twrp.
Then it let me move the file from the ext-sdcard to the sdcard.
I used the prime full wipe.
Then I tried to install the stock rom by transferring it in twrp file manager.
I got the file onto the sdcard, but when i tried to install, it said Failed.
That was it.
I even tried installing the ICS version I got from ASUS. Same thing.
Now, I am going to try to access via unbricker...don't know if it will work, but I am out of ideas.
Click to expand...
Click to collapse
big time noob said:
I am alive!
us-tf201-jro03c-10.4.2.15-stock-deodexed.zip
That is the last rom I successfully used.
I used all sorts of different wipes. I was in twrp and noticed my pc installing the transformer adb driver. So I hopped into adb to see if it would see my device with that driver. (it did, but it wasn't before from the fastboot or adb commands with naked driver).
I tried sideloading the above rom from twrp. It worked.
Thought others might want to know.
I do not know if I can install other roms or not. I am a little scared to try just yet.
Click to expand...
Click to collapse
You will have the jelly bean bootloader now so as long as you stick to it you should be fine. The only other thing I would suggest is check you version of twrp, you should be running the jelly bean version of it also. And if I am not mistaken, you need to be on ics to use nvflash (although I haven't checked the op recently so I could be wrong) so definitely stay away from that unless you downgrade.
So my tablet won't get past the Asus start up screen, but I did manage to get CWM working, problem is that I have no roms on my internal SD, because I wiped everything trying to fix stuff with WSG Flasher (didn't work).
I've tried everything, but I'm at a total loss here. adb won't work, even after I installed that dreadful Asus PC Suite, WSG FLasher doesn't work because adb doesn't work and
Code:
fastboot -i 0x0b05 flash somerom.zip
doesn't work either.
I've tried installing dozens of roms and CWM versions through fastboot, but none worked. The only CWM image that did work was called "recover-jb.img" that I got from here, though it's kind of useless if I can't install any roms.
Any suggestions, or should I just throw my tablet out?
Pepe1Vo said:
So my tablet won't get past the Asus start up screen, but I did manage to get CWM working, problem is that I have no roms on my internal SD, because I wiped everything trying to fix stuff with WSG Flasher (didn't work).
I've tried everything, but I'm at a total loss here. adb won't work, even after I installed that dreadful Asus PC Suite, WSG FLasher doesn't work because adb doesn't work and
Code:
fastboot -i 0x0b05 flash somerom.zip
doesn't work either.
I've tried installing dozens of roms and CWM versions through fastboot, but none worked. The only CWM image that did work was called "recover-jb.img" that I got from here, though it's kind of useless if I can't install any roms.
Any suggestions, or should I just throw my tablet out?
Click to expand...
Click to collapse
what were you doing when you started having trouble? are you on jb or ics bootloader where is the nvida on your splash screen?
whycali said:
what were you doing when you started having trouble? are you on jb or ics bootloader where is the nvida on your splash screen?
Click to expand...
Click to collapse
I was trying to install CM10, initially installing any CM rom would fail because CWM would say "assert failed, model is not tf201" (It is most certainly a transformer prime, I checked double checked) I edited the updater-script file in the .zip to skip the model check, after that installing the rom went just fine, it would just hang indefinitely on the splash screen.
The tablet is on the jb bootloader, the nvidia logo is in the bottom right corner.
Pepe1Vo said:
I was trying to install CM10, initially installing any CM rom would fail because CWM would say "assert failed, model is not tf201" (It is most certainly a transformer prime, I checked double checked) I edited the updater-script file in the .zip to skip the model check, after that installing the rom went just fine, it would just hang indefinitely on the splash screen.
The tablet is on the jb bootloader, the nvidia logo is in the bottom right corner.
Click to expand...
Click to collapse
let me get this straight. you can figure out how to change the updater.script but you insist on using cwm? Fastboot twrp to your prime and install a rom zip from your microsd.
whycali said:
let me get this straight. you can figure out how to change the updater.script but you insist on using cwm? Fastboot twrp to your prime and install a rom zip from your microsd.
Click to expand...
Click to collapse
Err, I didn't even know there was an alternative to cwm... At any rate, will twrp allow me to transfer files? My microsd is empty due a hardwipe I did.
Yes. TWRP Allows you to also flash zips from micro sd . Altrough I'm not sure can you install it from the situation you're in.
Sent from my GT-I9100 using xda app-developers app
Pepe1Vo said:
Err, I didn't even know there was an alternative to cwm... At any rate, will twrp allow me to transfer files? My microsd is empty due a hardwipe I did.
Click to expand...
Click to collapse
first you need the drivers for fastboot installed to your pc. you can accomplish this by following the advice given here.
http://forum.xda-developers.com/showpost.php?p=34477256&postcount=5703
Next you need a working twrp which will help you install a rom from your external microsd card. get that here. and follow his install istructions.
http://forum.xda-developers.com/showpost.php?p=34359560&postcount=5497
then I recommend grabbing this rom to install from your microsd using twrp.
AndroWook Prime Hairy Bean v1.4
www.gamerzxtreme.com/AndroWook_Hairy_Bean_v1.4_FINAL_1.zip
you should only need to follow these instructions from there.
Download AndroWook Prime Hairy Bean v1.4 from one of the links above and copy to either root of internal SD or micro SD.
Boot into recovery (TWRP) and wipe cache, dalvik cache and factory reset. You can wipe system as well if you want a total deep clean but do so at your own risk.
Select to install ROM from SD and follow on screen prompts.
When install completed allow 30-60 mins for the system to cache itself upon which time you should now have a nice smooth TP.
Enjoy!
I have a Nabi 2 UK for my son and had GAPPS installed but stayed on the 1.9.37 version as the OAT would not work.
I now see that I can get the tablet up to 4.1 and get GAPPS as well but I seem to be defeated at the last step every turn but the 'dead' android on it's back.
I don't have the original back up to start from.
I've gone to the 1937 stock image and via TWRP, the OAT'ed to 2.1, but the second 2.3 update fails with the dead android
I've tried 2311 which also fails in the same way.
I've seen some conversations on these boards but the file outlined are often out of bandwith and I can't comment on the threads to ask for help.
So now I'm back to 1.9.37 but I also can't seem to reinstate GAPP using Nabi Labs tools I as it braks the nabi mode and the tablet won't work.
All in all this is turing out to be a massive waste of time. Any suggestions how I can salavge this?
Cheers
Fulhair
Fulhair said:
I have a Nabi 2 UK for my son and had GAPPS installed but stayed on the 1.9.37 version as the OAT would not work.
I now see that I can get the tablet up to 4.1 and get GAPPS as well but I seem to be defeated at the last step every turn but the 'dead' android on it's back.
I don't have the original back up to start from.
I've gone to the 1937 stock image and via TWRP, the OAT'ed to 2.1, but the second 2.3 update fails with the dead android
I've tried 2311 which also fails in the same way.
I've seen some conversations on these boards but the file outlined are often out of bandwith and I can't comment on the threads to ask for help.
So now I'm back to 1.9.37 but I also can't seem to reinstate GAPP using Nabi Labs tools I as it braks the nabi mode and the tablet won't work.
All in all this is turing out to be a massive waste of time. Any suggestions how I can salavge this?
Cheers
Fulhair
Click to expand...
Click to collapse
Hi.
I had a similar issue (US ROM though). I had dead Android guys, messages in TWRP that I didn't have an operating system installed and all kinds of other issues. I really thought that I had bricked the Nabi as I was up against a wall and nothing I was finding online was working.
I have posted this before elsewhere -- this is what I did to get out of it:
I think when I was installing the JB version of TWRP I also tried to change the screenlock image not realizing that the process had changed for JB. I had a complete mess with very similar if not identical issues as you.
What I did:
1. Make sure TWRP 2.6.3.0 for Jellybean is on the Nabi.
2. Download the stock 2.3.11 ROM from the Nabi wiki site and unzip it into a folder on your PC.
3. Next you need to copy the 4 recovery files from your PC to your SD card. I put the SD card into my PC and copied the files over putting them into a TWRP back up folder on the SD card. Now, in order for Jellybean TWRP to recognize the backup, I had to fool it into thinking I had a "good" existing Jellybean TWRP backup and rename the TWRP backup folders to something like this:
TWRP\BACKUPS\0f41000001000000\2014-01-24--09-54-07 JRO03C\
4. Put the SD card back into the Nabi and then boot into TWRP mode.
5. Do a restore from there.
It *should* install a clean fresh copy of Jellybean on the Nabi. It does take what seems like an eternity for it to get past the spinning circle with the NABI logo when it's loading for the first time so be patient.
You may need to alter some of this since you are in the UK though.. but the main suggestion is to put whatever copy of the ROM onto an SD card (remember to follow the correct directory format for either ICS or JB) and then restore via TWRP to get you running.
2girlzdad said:
Hi.
I had a similar issue (US ROM though). I had dead Android guys, messages in TWRP that I didn't have an operating system installed and all kinds of other issues. I really thought that I had bricked the Nabi as I was up against a well and nothing I was finding online was working.
I have posted this before elsewhere -- this is what I did to get out of it:
I think when I was installing the JB version of TWRP I also tried to change the screenlock image not realizing that the process had changed for JB. I had a complete mess with very similar if not identical issues as you.
What I did:
1. Make sure TWRP 2.6.3.0 for Jellybean is on the Nabi.
2. Download the stock 2.3.11 ROM from the Nabi wiki site and unzip it into a folder on your PC.
3. Next you need to copy the 4 recovery files from your PC to your SD card. I put the SD card into my PC and copied the files over putting them into a TWRP back up folder on the SD card. Now, in order for Jellybean TWRP to recognize the backup, I had to fool it into thinking I had a "good" existing Jellybean TWRP backup and rename the TWRP backup folders to something like this:
TWRP\BACKUPS\0f41000001000000\2014-01-24--09-54-07 JRO03C\
4. Put the SD card back into the Nabi and then boot into TWRP mode.
5. Do a restore from there.
It *should* install a clean fresh copy of Jellybean on the Nabi. It does take what seems like an eternity for it to get past the spinning circle with the NABI logo when it's loading for the first time so be patient.
You may need to alter some of this since you are in the UK though.. but the main suggestion is to put whatever copy of the ROM onto an SD card (remember to follow the correct directory format for either ICS or JB) and then restore via TWRP to get you running.
Click to expand...
Click to collapse
Thanks for the outline. Sorry if I'm being a bit dim but how do I get the 2.6.3.0 TWRP onto it?
I've got the NaviLabs GUI and TWRP'd up to v 2.6.1.0 but need to get the Jelly Bean version.
I've tried the zip install with twrp-recovery-JBNV7AUS-263 but it just breaks TWRP and won't boot.
Thanks again.
Fulhair said:
Thanks for the outline. Sorry if I'm being a bit dim but how do I get the 2.6.3.0 TWRP onto it?
I've got the NaviLabs GUI and TWRP'd up to v 2.6.1.0 but need to get the Jelly Bean version.
I've tried the zip install with twrp-recovery-JBNV7AUS-263 but it just breaks TWRP and won't boot.
Thanks again.
Click to expand...
Click to collapse
Get whatever TWRP you want
http://forum.xda-developers.com/showpost.php?p=48891386&postcount=76
Follow this http://forum.xda-developers.com/showpost.php?p=49956448&postcount=49 to put that recovery in Nabilabgui except use
For XP
C:\Documents and Settings\username\Local Settings\Apps\2.0\xxx\xxx\nabixxxx\2\recovery\new
or Vista/7/8
C:\Users\username\appdata\local\apps\2.0\xxx\xxx\n abixxx\2\recovery\new
The post is for the JR I think the above will be right for the Nabi2, I'm mobile so I can't check.
aicjofs said:
Get whatever TWRP you want
http://forum.xda-developers.com/showpost.php?p=48891386&postcount=76
Follow this http://forum.xda-developers.com/showpost.php?p=49956448&postcount=49 to put that recovery in Nabilabgui except use
For XP
C:\Documents and Settings\username\Local Settings\Apps\2.0\xxx\xxx\nabixxxx\2\recovery\new
or Vista/7/8
C:\Users\username\appdata\local\apps\2.0\xxx\xxx\n abixxx\2\recovery\new
The post is for the JR I think the above will be right for the Nabi2, I'm mobile so I can't check.
Click to expand...
Click to collapse
Good advice. Thanks for the TWRP instructions,
I can now get the TWRP v2.6.3.0 on, but only the ICS version will boot, The Jelly bean install won't bring up the TWRP screens. I've even tried updating to 2311 from the ICS version and then trying to update to the TWRP JB version with no joy.
Now I can't even get the nabi to connect to the usb in Nabi Lab GUI This is doing my head in!!!
Fulhair said:
Good advice. Thanks for the TWRP instructions,
I can now get the TWRP v2.6.3.0 on, but only the ICS version will boot, The Jelly bean install won't bring up the TWRP screens. I've even tried updating to 2311 from the ICS version and then trying to update to the TWRP JB version with no joy.
Now I can't even get the nabi to connect to the usb in Nabi Lab GUI This is doing my head in!!!
Click to expand...
Click to collapse
If going to 2311 you need to update bootloader. That is in the addonfix zip. Then JB twrp should work.
aicjofs said:
If going to 2311 you need to update bootloader. That is in the addonfix zip. Then JB twrp should work.
Click to expand...
Click to collapse
Okay, so I managed to get back to TWRP 2.6.3.0 under ICS. I then install the 2311 rom, which succeeds. As per instructions, before I reboot I go back and try to install the addon zip in TWRP.
But I get an error
'E:Error executing updater binary in zip '/external_sdcard/addonzip'
Error flashing zip '/external_sdcard/addonzip'.
I'm not sure if the error is something with TWRP or the addon.zip.
One of the microsd I have won't show the addonzip and none of the other TWRP recovery roms..and yes I have checked the directory structure.
Any ideas?
Thanks
Fulhair said:
Okay, so I managed to get back to TWRP 2.6.3.0 under ICS. I then install the 2311 rom, which succeeds. As per instructions, before I reboot I go back and try to install the addon zip in TWRP.
But I get an error
'E:Error executing updater binary in zip '/external_sdcard/addonzip'
Error flashing zip '/external_sdcard/addonzip'.
I'm not sure if the error is something with TWRP or the addon.zip.
One of the microsd I have won't show the addonzip and none of the other TWRP recovery roms..and yes I have checked the directory structure.
Any ideas?
Thanks
Click to expand...
Click to collapse
Okay, I abandoned the addon.zip and went back to 2.1.27 rom and OAT over to get to the last update which failed.
Then installed the OAT2.zip via TWRP and bingo! Now working on Jelly Bean with Google Play - okay it's now the US version but it works
I would caution that the zip install had to be installed on the internal SD not the external one.
But otherwise a BIG thank you to all for building the tools to let me do the update and for your support.
Cheers:highfive: