I'm trying to reset my s2 st-i9100 back to stock (encrypted the phone, can't mount sd card, can't flash new roms, need to reset in order to get sd card access back)
I saw the thread with list of official firmwares I have no idea which I should download and flash, I won't lie, the descriptions don't make much sense to me.
Any help would be much appreciated
Do you want a link for the "telepathic stock" one.
Sent from my GT-I9100 using Tapatalk 2
theunderling said:
Do you want a link for the "telepathic stock" one.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I don't get it
Maybe if you post the details about your phone someone can tell you which one you need and how to install it.
You see luv,there are a lot of variables/variations regarding the process.
Sent from my GT-I9100 using Tapatalk 2
Mind reading is hard
Trace6x said:
I don't get it
Click to expand...
Click to collapse
I live in ___________
My phone carrier is __________
Add text to those blank areas and we have information
theunderling said:
Maybe if you post the details about your phone someone can tell you which one you need and how to install it.
You see luv,there are a lot of variables/variations regarding the process.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
right sorry
UK with Giffgaff (o2) it might have been originally locked to another network I can't quite remember
gti9100
android 4.0.4
baseband v I9100XXKI1
Kernel Version
3.0.32-CMg12ef675
[email protected] #1
SMP PREEMPT Tue jun 26 06:15:35 PDT 2012
cyanogenmod v 9.0.0-rc1-galaxys2
build no
cm_galays2-userdebug 4.0.4 IMM76L
eng.jenkins.201200626.060555 test-keys
Anything else?
Trace6x said:
right sorry
gti9100
android 4.0.4
baseband v I9100XXKI1
Kernel Version
3.0.32-CMg12ef675
[email protected] #1
SMP PREEMPT Tue jun 26 06:15:35 PDT 2012
cyanogenmod v 9.0.0-rc1-galaxys2
build no
cm_galays2-userdebug 4.0.4 IMM76L
eng.jenkins.201200626.060555 test-keys
Anything else?
Click to expand...
Click to collapse
Are you trying to flash a stock rom?
For stock roms go to this thread & flash UHLPS
http://forum.xda-developers.com/showthread.php?t=1544487
Barbiox Dogg said:
Are you trying to flash a stock rom?
For stock roms go to this thread & flash UHLPS
http://forum.xda-developers.com/showthread.php?t=1544487
Click to expand...
Click to collapse
I'm actually trying to follow these instructions:
1) Use the All-in-One-Kit and flash your recovery back to stock
2) Boot into the bootloader and choose to "clear storage" and afterwards to reset to factory defaults.
3) Go back to the all-in-one-kit and flash a CWM recovery version again.
4) Reboot into recovery (CWM). Your /sdcard should now be mounted and visible.
I don't know what the all in one kit is so I'm just trying to find a stock rom to flash and hope that that will work
Trace6x said:
I'm actually trying to follow these instructions:
1) Use the All-in-One-Kit and flash your recovery back to stock
2) Boot into the bootloader and choose to "clear storage" and afterwards to reset to factory defaults.
3) Go back to the all-in-one-kit and flash a CWM recovery version again.
4) Reboot into recovery (CWM). Your /sdcard should now be mounted and visible.
I don't know what the all in one kit is so I'm just trying to find a stock rom to flash and hope that that will work
Click to expand...
Click to collapse
Follow the instructions in the link i provided. That's what i always use whenever i want to go back to stock rom. Remember to wipe/data factory reset before proceeding or you will end up in boot loop.
Barbiox Dogg said:
Follow the instructions in the link i provided. That's what i always use whenever i want to go back to stock rom. Remember to wipe/data factory reset before proceeding or you will end up in boot loop.
Click to expand...
Click to collapse
Thanks will do, only thing is you one you said is described as
Region: South America
Country Argentina
should I not be downloading an English one or does it not matter?
Trace6x said:
Thanks will do, only thing is you one you said is described as
Region: South America
Country Argentina
should I not be downloading an English one or does it not matter?
Click to expand...
Click to collapse
It does not matter, the rom is in English.
However you may feel like installing a United Kingdom or Nordic countries rom but don't download roms that
has modem XXLQ6 because they are known to brick devices.
Barbiox Dogg said:
It does not matter, the rom is in English.
However you may feel like installing a United Kingdom or Nordic countries rom but don't download roms that
has modem XXLQ6 because they are known to brick devices.
Click to expand...
Click to collapse
ok thank you! I don't plan on keeping the rom anyway, just want to make sure nothing goes wrong
thanks again, after flashing multiple times (and formatting the internal storage) I've finally gotten it fixed. I think the problem I was having was to do with the phone encryption and the fact that I was trying to mount an external sd card when I didn't have one in the phone, flashing to stock, wiping and formatting and then reinstalling clockwork seemed to work, I then installed cm9 (although I've lost everything)
Thanks for the help!
Related
Hey Guys!
I just bought the mighty S2 and am loving it.
Baseband version: I9100DDLPA
Build Number: IML74K.XWLP7
I tried rooting my phone with ODIN and CF_ROOT method. This is the file version i used.
CF-Root-SGS2_XW_XEN_LP7-v5.4-CWM5.zip
Now after rooting, my phone booted automatically. When i tried restarting, it was getting stuck on the yellow triangle.
I then downloaded the other kernel and tried flashing that too with ODIN.
CF-Root-SGS2_DX_XTC_LP7-v5.4-CWM5.zip
But alas..
Then i downloaded the official ROM for my country and flashed it with ODIN. Fixed my phone. Below is the firmware i used.
GT-I9100_INU_I9100XWLP7_I9100ODDLP9_I9100DDLPA
This runs on ICS 4.0.3. I see that there's one more ROM of my country thats 4.0.4 on samsung-updates.
So my questions are as below
1) Which CF_ROOT version do i use to get my stock firmware rooted?
2) Is 4.0.4 any better than 4.0.3? Where do i find the changelog?
3) Can I flash a firmware of ANY country? Does it matter if I flash the firmware of my neighboring country?
4) Where do i find the stock kernel for my Firmware?
5) Does flashing the official firmware flash the stock kernel along with it? Meaning will it remove the Siyah-s2-v4.1.5 i am currently running :cyclops: ?
6) If 5 is yes, and if i need to by chance send my phone to the service center for warranty, and also if I am running a custom rom, will flashing the original firmware of my country + removing the yellow triangle + resetting the counter bring it back to warranty? ;P
7) Is there a way to try a ROM from the SD card without actually flashing it?
I seriously gotta parcel a crate of beer for the one who answers my questions.. One all set, I am in for trying out a custom ROM!
androiderb89 said:
Hey Guys!
I just bought the mighty S2 and am loving it.
Baseband version: I9100DDLPA
Build Number: IML74K.XWLP7
I tried rooting my phone with ODIN and CF_ROOT method. This is the file version i used.
CF-Root-SGS2_XW_XEN_LP7-v5.4-CWM5.zip
Now after rooting, my phone booted automatically. When i tried restarting, it was getting stuck on the yellow triangle.
I then downloaded the other kernel and tried flashing that too with ODIN.
CF-Root-SGS2_DX_XTC_LP7-v5.4-CWM5.zip
But alas..
Then i downloaded the official ROM for my country and flashed it with ODIN. Fixed my phone. Below is the firmware i used.
GT-I9100_INU_I9100XWLP7_I9100ODDLP9_I9100DDLPA
This runs on ICS 4.0.3. I see that there's one more ROM of my country thats 4.0.4 on samsung-updates.
So my questions are as below
1) Which CF_ROOT version do i use to get my stock firmware rooted?
2) Is 4.0.4 any better than 4.0.3? Where do i find the changelog?
3) Can I flash a firmware of ANY country? Does it matter if I flash the firmware of my neighboring country?
4) Where do i find the stock kernel for my Firmware?
5) Does flashing the official firmware flash the stock kernel along with it? Meaning will it remove the Siyah-s2-v4.1.5 i am currently running :cyclops: ?
6) If 5 is yes, and if i need to by chance send my phone to the service center for warranty, and also if I am running a custom rom, will flashing the original firmware of my country + removing the yellow triangle + resetting the counter bring it back to warranty? ;P
7) Is there a way to try a ROM from the SD card without actually flashing it?
I seriously gotta parcel a crate of beer for the one who answers my questions.. One all set, I am in for trying out a custom ROM!
Click to expand...
Click to collapse
1 I don't know I use siyah kernel to root although there are full instructions in chainfires thread.
2 4.0.4 is better than 4.0.3 as it's an upgrade , use Google for change log.
3 yes you can flash any countries rom for your device.
4 in Stock rom. Just reflash the ROM to stock kernel, but this will loose root access.
5 yes. Correct.
6. It will remove triangle but you need triangle away app to reset counter. Credits to chainfire
7 no not that I know of.
Sir can I suggest you read the sticky threads in this forum. There are many excellent guides, advice, tips and information. You would do well to read them to save bricking your new device.
All the best
Sent from my GT-I9100 using xda premium
HANDSY said:
1 I don't know I use siyah kernel to root although there are full instructions in chainfires thread.
2 4.0.4 is better than 4.0.3 as it's an upgrade , use Google for change log.
3 yes you can flash any countries rom for your device.
4 in Stock rom. Just reflash the ROM to stock kernel, but this will loose root access.
5 yes. Correct.
6. It will remove triangle but you need triangle away app to reset counter. Credits to chainfire
7 no not that I know of.
Sir can I suggest you read the sticky threads in this forum. There are many excellent guides, advice, tips and information. You would do well to read them to save bricking your new device.
All the best
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Hi Handsy. I am doing that. Thats were i learnt how to root n stuff but it failed. Hence used Siyah kernel and automagically got Root access
Anyway regarding point number 4, i didnt understand what you meant. DO I reflash the entire 350MB firmware just to get the stock kernel??
androiderb89 said:
Hi Handsy. I am doing that. Thats were i learnt how to root n stuff but it failed. Hence used Siyah kernel and automagically got Root access
Anyway regarding point number 4, i didnt understand what you meant. DO I reflash the entire 350MB firmware just to get the stock kernel??
Click to expand...
Click to collapse
Yes to get stock kernel re-flash the whole stock rom. There is a method of extracting the kernel from the zip file but I've never tried it. Easy and safe to re flash whole rom package.
Sent from my GT-I9100 using xda premium
HANDSY said:
Yes to get stock kernel re-flash the whole stock rom. There is a method of extracting the kernel from the zip file but I've never tried it. Easy and safe to re flash whole rom package.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Thanks for the great help! +1 for ya
I noticed that flashing the firmware didnt make a single change to my phone. The apps and settings were totally intact. Will installing 4.0.4 too be the same? Also i heard about this brick bug on our phone. Does that happen while only wiping data/cahche using CWM? Is there an anther way of wiping data/cache/dalvik etc? other than factory reset for the bug
androiderb89 said:
Thanks for the great help! +1 for ya
I noticed that flashing the firmware didnt make a single change to my phone. The apps and settings were totally intact. Will installing 4.0.4 too be the same? Also i heard about this brick bug on our phone. Does that happen while only wiping data/cahche using CWM? Is there an anther way of wiping data/cache/dalvik etc? other than factory reset for the bug
Click to expand...
Click to collapse
When moving between like firmwares (same number) you often do this without wiping data however when upgrading or down grading a full wipe is necessary. To avoid brick bug only wipe with a custom kernel eg siyah etc
Sent from my GT-I9100 using xda premium
Dont forget to backup your efs folder and make a nand backup before you get going.
Help
Hardware : MT6577
Model : GT-I93000
Build number : IMM76D.I93000ZSALED.9P017.6628
Build date UTC : 20121016-085327
Android v : 4.1.1
Baseband v: -----
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 SMP Tue Oct 16 16:50:37 CST 2012
Got softbricked. Bootloop. Need help to unbrick.
Welcome to the GT-I9100 forum.....
Hello guys I would really appreciate if somebody can help me out.
I flashed original stock Rom from this thread:
http://forum.xda-developers.com/showthread.php?t=1544487
I9100XWLPG Download (Thanks To SamMobile!)
Base Firmware: I9100XWLPG (4.0.3)
Region: Europe
Country Nordic countries
Carrier: Unbranded
Build Date: 24 May 2012
Modem: XXLPX
CSC: NEELP4
Change List: 619441
CF-Root 5.5 LPG: Download
edit: I just checked my Amazon account and this is the phone that I bought:
https://www.amazon.com/gp/css/order...=1&opt=ab&qid=&search=103-8711617-6477001&sr=
please tell me which one from the versions in the thread that I posted link is the right one for me
I flashed this because in my settings it was saying that my baseband is: XXLPX
now my phone is able to go into Download mode but it cannot load up.
It just stays on the: S logo and it says Samsung Galaxy S II
cannot load up I waited for it for like 1 hour
I'm not a lamer I flashed through ODIN 3.04 clicked on PDA.
To be honest I'm not sure if this is the right firmware for my phone because like I said the only thing that navigated me to this move was the information in my: About phone Menu before I flashed.
My phone was Rooted before I do that (don't know if that makes a difference but I just wanna give the maximum information that I have)
Please somebody help me out I don't know what to do.
I live in USA I bought the phone from Amazon it was factory unlocked and that's why I don't know where did the phone come from.
Please help, thank you guys
martybg said:
Hello guys I would really appreciate if somebody can help me out.
I flashed original stock Rom from this thread:
http://forum.xda-developers.com/showthread.php?t=1544487
I9100XWLPG Download (Thanks To SamMobile!)
Base Firmware: I9100XWLPG (4.0.3)
Region: Europe
Country Nordic countries
Carrier: Unbranded
Build Date: 24 May 2012
Modem: XXLPX
CSC: NEELP4
Change List: 619441
CF-Root 5.5 LPG: Download
edit: I just checked my Amazon account and this is the phone that I bought:
https://www.amazon.com/gp/css/order...=1&opt=ab&qid=&search=103-8711617-6477001&sr=
please tell me which one from the versions in the thread that I posted link is the right one for me
I flashed this because in my settings it was saying that my baseband is: XXLPX
now my phone is able to go into Download mode but it cannot load up.
It just stays on the: S logo and it says Samsung Galaxy S II
cannot load up I waited for it for like 1 hour
I'm not a lamer I flashed through ODIN 3.04 clicked on PDA.
To be honest I'm not sure if this is the right firmware for my phone because like I said the only thing that navigated me to this move was the information in my: About phone Menu before I flashed.
My phone was Rooted before I do that (don't know if that makes a difference but I just wanna give the maximum information that I have)
Please somebody help me out I don't know what to do.
I live in USA I bought the phone from Amazon it was factory unlocked and that's why I don't know where did the phone come from.
Please help, thank you guys
Click to expand...
Click to collapse
Baseband/Modem(in ur case XXLPX) has nothing to do in selecting the right Firmware ma8, what really matters is the 'Build number' which u should have checked for in ur earlier firmware
if u can enter into recovery mode ( using Volup+ home + pwrbutton combo) then in recovery do a wipe data/factory reset, then reboot and see, if it doesnt resolve ur issue, then do reflash the Stock firmware once again from 'Odin' and see
Sun90 said:
Baseband/Modem(in ur case XXLPX) has nothing to do in selecting the right Firmware ma8, what really matters is the 'Build number' which u should have checked for in ur earlier firmware
if u can enter into recovery mode ( using Volup+ home + pwrbutton combo) then in recovery do a wipe data/factory reset, then reboot and see, if it doesnt resolve ur issue, then do reflash the Stock firmware once again from 'Odin' and see
Click to expand...
Click to collapse
The problem is that i tried to flash stock rom which means i do not have recovery anymore what do i do help me
Stock ROMs also have recoveries. Just boot into recovery and wipe data.
Sent from my GT-I9100
boki9999 said:
Stock ROMs also have recoveries. Just boot into recovery and wipe data.
Sent from my GT-I9100
Click to expand...
Click to collapse
I just tried and I don't know how but I'm in recovery (Clockwork Mode 5.5.0.4) please tell me how do I find the stock ROM 4.0.4 for this device, how to find which model this device is exactly
Email samsung with the imei and serial numbers and ask them where it come from.
Sent from my GT-N7000 using xda premium
theunderling said:
Email samsung with the imei and serial numbers and ask them where it come from.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Their support just told me they cannot help me because they are for US phones only I was like whatt???
Hi guys. I have been a frequent visitor and learned alot about android and features. I am ready to root my galaxy s2 i9100
My details are :
Android version: 4.04
Model number gt-i9100
Baseband version: i9100XXLQ6
Kernal version: I9100xxlbq-cl911584
build number: IMM76D.XXLQB
I downloaded
ODIN 1.85
CF-Root-SGS2_XX_XEO_LQB-v5.6-CWM5
I am not seeing the original kernal file up for download for my version. What else do I need for my root? Is there any advice such as best method and such. Thank you kindly everyone. Mods, if I posted in the wrong section, please move my thread to the correct location.
That's all you need mate. This kernel is declared safe by Chainfire but as any 4.0.4 kernel should not be used to wipe data because of possibility of emmc cap bug rendering your phone bricked. Root with this kernel but make sure to switch to custom safe one before attempting to wipe data.
Best of luck
Sent from my GT-I9100 using Tapatalk 2
daxgirl said:
That's all you need mate. This kernel is declared safe by Chainfire but as any 4.0.4 kernel should not be used to wipe data because of possibility of emmc cap bug rendering your phone bricked. Root with this kernel but make sure to switch to custom safe one before attempting to wipe data.
Best of luck
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Which one would you recommend for wiping data? i assume by wiping data you mean unrooting. am I right?
wargrafix said:
Which one would you recommend for wiping data? i assume by wiping data you mean unrooting. am I right?
Click to expand...
Click to collapse
check here you'll find your answers http://forum.xda-developers.com/showthread.php?t=1756242
slimlo said:
check here you'll find your answers http://forum.xda-developers.com/showthread.php?t=1756242
Click to expand...
Click to collapse
Essentially flashing using a 4.04 firmware will brick the phone? or is it when I flash, it will be bad to flash using a 4.04 firmware? Sooo confused.
If anyone has the steps what I should do, please tell me. I am worried about bricking.
If I root the phone, when official JB comes out, will I be able to update?
any help guys? The thread isn't very clear what do I do if I have this kernal. Do I downgrade before rooting?
Insted of flashing that Cf root kernel with Odin or Cwm, flash Siyah 4.1.5.
www.gokhanmoral.com
Sent from my GT-I9100
The link, do I root with those? if I do, what will it change?
wargrafix said:
Hi guys. I have been a frequent visitor and learned alot about android and features. I am ready to root my galaxy s2 i9100
My details are :
Android version: 4.04
Model number gt-i9100
Baseband version: i9100XXLQ6
Kernal version: I9100xxlbq-cl911584
build number: IMM76D.XXLQB
I downloaded
ODIN 1.85
CF-Root-SGS2_XX_XEO_LQB-v5.6-CWM5
I am not seeing the original kernal file up for download for my version. What else do I need for my root? Is there any advice such as best method and such. Thank you kindly everyone. Mods, if I posted in the wrong section, please move my thread to the correct location.
Click to expand...
Click to collapse
I actually have the same HW version in my new SGS2 and I have checked with eMMC check (downloaded from Google Play) that my chip is safe from "brick bug" :laugh:
Now the question is: which kernel to choose, CF or Siyah ? I'm planning to use CyanogenMod 10 on this phone, does kernel version matter at all in this case ?
/edit:
ROM will be either original CM10 or one of the variants (like HellyBean for example)
ZDQ said:
I actually have the same HW version in my new SGS2 and I have checked with eMMC check (downloaded from Google Play) that my chip is safe from "brick bug" :laugh:
Now the question is: which kernel to choose, CF or Siyah ? I'm planning to use CyanogenMod 10 on this phone, does kernel version matter at all in this case ?
/edit:
ROM will be either original CM10 or one of the variants (like HellyBean for example)
Click to expand...
Click to collapse
If GotBrickbug app by CF said your chip is safe than it shouldn't matter what kernel you use. Safe hardware.
Personally I always prefer rooting with CF kernels that match my FW version. Then if you're still unsure about the chip... flash siyah, go to advanced (while still in recovery) > reboot recovery. Then wipe data with siyah kernel just to be on the safe side. I always keep siyah 3.5.2 (the first transisiontl ics/jb kernel) for those purposes. CM10 built in kernels are all considered safe so that's the last time you'll ever be worried about it.
Best of luck, man
Thank you very much, I ran emmc check and I have a sane chip.
if I flash with the CF LBQ, what is my next step?
wargrafix said:
Thank you very much, I ran emmc check and I have a sane chip.
if I flash with the CF LBQ, what is my next step?
Click to expand...
Click to collapse
your phone will be rooted and u can then choose to install a custom kernel like Siyah v 4.1.5 on ur phone which gives u the latest CWM recovery thro which u can install any custom rom of ur choice(meant for i9100 though) on ur phone
Thank you very much!
If my questions seemed noobish, its because I want to be very sure. It my first expensive phone.
a question though, When samsung upgrades us to JB, will I be able to update it?
wargrafix said:
Thank you very much!
If my questions seemed noobish, its because I want to be very sure. It my first expensive phone.
a question though, When samsung upgrades us to JB, will I be able to update it?
Click to expand...
Click to collapse
Samsung releases firmware in various regions and with varied carriers. So I bet that till it is officially released it will take time but when it does you will get OTA if your are on 'STOCK' ROM. but if you move away to custom rom then you will have to update manually.
Sent from my GT I-9100 with CM10 JellyBean L.O.V.E. via Tapatalk 2
So essentially I need to revert to 4.04 stock to upgrade? How do I do that?
wargrafix said:
So essentially I need to revert to 4.04 stock to upgrade? How do I do that?
Click to expand...
Click to collapse
To revert back assuming you didn't do backup before, download 4.0.4 firmware for your region on sammobile and flash it using odin.. Then to upgrade it when official update are up just hit OTA, kies, or flash it via odin the same way like you flash 4.0.4..
If you don't have idea how to flash then google it, theres plenty much tutorials out there.. hope it helps
Ohhhhhh. I get it. Flash using CF, or CM 10, use triangle app to remove warning triangle and if I need to unroot, flash with 4.04 (my region) using odin? Sound pretty simple. Am I missing any steps?
wargrafix said:
Ohhhhhh. I get it. Flash using CF, or CM 10, use triangle app to remove warning triangle and if I need to unroot, flash with 4.04 (my region) using odin? Sound pretty simple. Am I missing any steps?
Click to expand...
Click to collapse
Actually I get confused myself hehe, by "Flash using CF, or CM 10" you mean flash what? The rest are ok..
Well, let's put this simple, Flash the CF-Root for your phone then you're rooted now, if you want to flash custom rom such as cm10 then flash it (the cm10 zip file to be flashed on recovery mode and don't forget to read the cm10 instruction before & after flashing), if you want to get rid of the triangle then do it with triangle away, finally to unroot and revert to stock, just flash stock firmware via odin..
Hi everyone! I just rooted my phone and it was sooo easy.
Thank you so much. Your advice and help definitely made it much easier than I though.
Yeah, welcome to the rooted world where you can explore more with your phone
Sent from my GT-I9100
Hi everyone,
I’m new to this forum and not an expert in android but i really need your help so i’ll try to make this post the best i can. Last week I bought a galaxy s2 unlocked but unfortunately it was rooted and with a leaked rom of android 4.0.3 (XXLPH), I wanted to return it to stock so I followed this tutorial (http://forum.xda-developers.com/showthread.php?t=1650919) and also did this (http://forum.xda-developers.com/showthread.php?p=22669088#post22669088) because my lockscreen wasn’t working. But now I am having some troubles:
-Sometimes (today was the third time this week) I lose service and mi imei doesn’t appear when I type *#06#, also it says base band “unknown” in settings but it’s strange because if I remove the battery and put it back again everything works fine again. Does this have to do with my EFS folder? Is there a way to check if it’s corrupted?
-When I connect it to the pc and open kies, it says:
“Your device’s current firmware version is not supported to update firmware via Kies.
Current firmware version: PDA:LPZ / PHONE:LPH /CSC:LP5 (XXX)”
I thought it was the csc but I checked using *#272*IMEI# and it says “Sales Code: ARO” which I think it’s correct because I’m in Argentina, I also used a code to check the PCode (not this one *2767*4387264636# because it didn’t work, I can’t remember which one) and it said “PCode: NOT ACTIVE” do you think that’s the problem?
Also in settings my serial number shows “00000000” I don’t know if this is related but I’m trying to give you all the information I can.
Sorry if my English is not the best but I speak Spanish, I’m trying to do my best. Any help will be really appreciated!
More details:
GT-I9100
Android 4.0.4
Baseband: I9100UHLPH
Kernel: 3.0.15-1133289 [email protected] #3 SMP PREEMPT
Build: IMM76D.UHLPZ
PDA: I9100UHLPZ
PHONE:I9100UHLPH
CSC:I9100AROLP5
Anyone? Please help!
Easy now.....
First off, you're up for some reading.
1- Brick bug.
2- Flashing (Odin / Mobile Odin).
3- Rooting.
4- EFS Folder.
Once you've done all that you can look for any of these Stock ROMs here.
When you are all done reading and you still wanna flash your device, let us know.
Saludos.
gastonw said:
Easy now.....
First off, you're up for some reading.
1- Brick bug.
2- Flashing (Odin / Mobile Odin).
3- Rooting.
4- EFS Folder.
Once you've done all that you can look for any of these Stock ROMs here.
When you are all done reading and you still wanna flash your device, let us know.
Saludos.
Click to expand...
Click to collapse
Thank you very much! I'll read everything and let you know.
All right i read everything now what should i do?
nahuedu said:
All right i read everything now what should i do?
Click to expand...
Click to collapse
you can start by checking if you got the brick bug, since you are on 4.0.4, with got brickbug app.
If you have an insane chip, flash siyah kernel via odin / mobile odin.
What ROM you wanna flash?
Download hc ktool from store, so you can back up EFS folder.
Sent from the little guy
Ok, so I installed the emmc brickbug app and it says I have an insane chip.
Now I have to root it like this http://forum.xda-developers.com/showthread.php?t=1501719 so I can backup my EFS folder with hc ktool, is this correct? I don’t want to do anything stupid.
Should I also check the memory blocks with the brick bug app?
I would like to flash this rom
I9100UHLPS
Base Firmware: I9100UHLPS (4.0.3)
Region: South America
Country Argentina
Carrier: Unbranded
Build Date: 12 June 2012
Modem: UHLPG
CSC: AROLP4
Change List: 709483
Is it necessary to flash siyah kernel? I would like it to be 100% stock.
You have to flash siyah in order to avoid the brick bug.
Once you flash it you'll be off the hook and flash anything you want.
Don't you wanna try official jelly bean? Don't worry about you being in argentina, it'll work just fine.
You could flash siyah via mobile odin, no brick risk involved.
Sent from the little guy
Ok but what should i do first?
root and backup efs? or just flash siyah?
I don't know how to flash siyah with odin, can I do it with cmw recovery?
Sorry for all these questions but I'm really scared
nahuedu said:
Ok but what should i do first?
root and backup efs? or just flash siyah?
I don't know how to flash siyah with odin, can I do it with cmw recovery?
Sorry for all these questions but I'm really scared
Click to expand...
Click to collapse
Siyah will get you rooted, then you can go backing things up, like EFS.
Watch some youtube vids first, just type i9100 siyah.
After that, get back here and read a thing or two about flashing and stuff at the Q&A section and the guides posted above.
One more thing, enter *#06# in the dialer and see if the imei number matches the imei number below the battery.
Sent from the little guy
Yes, I entered *#06# and the imei number is the same as the one on the back of the battery.
All right I just flashed siyah kernel and did a backup of my EFS folder with hc kTool.
The brickbug check app keeps telling me I have an insane chip, is that ok?
A yellow triangle now appears when I turn on the phone, I guess I'll have to use the triangleaway app am I correct?
What's next?
nahuedu said:
All right I just flashed siyah kernel and did a backup of my EFS folder with hc kTool.
The brickbug check app keeps telling me I have an insane chip, is that ok?
A yellow triangle now appears when I turn on the phone, I guess I'll have to use the triangleaway app am I correct?
What's next?
Click to expand...
Click to collapse
Yeap, triangle away will remove that and reset binary counter.
You can go on and flash JB now
Sent from the little guy
So I have to do it without wiping anything right?
It's ok if I flash the rom I told you before?
nahuedu said:
So I have to do it without wiping anything right?
It's ok if I flash the rom I told you before?
Click to expand...
Click to collapse
Don't you wanna try jelly bean? It's android's latest version.
Sent from the little guy
gastonw said:
Don't you wanna try jelly bean? It's android's latest version.
Sent from the little guy
Click to expand...
Click to collapse
Nah I'll just update it with kies when it comes out in my country.
nahuedu said:
Nah I'll just update it with kies when it comes out in my country.
Click to expand...
Click to collapse
personal, movistar or claro?
You could be talking 4-5 months.
Sent from the little guy
gastonw said:
personal, movistar or claro?
You could be talking 4-5 months.
Sent from the little guy
Click to expand...
Click to collapse
Unbranded!
nahuedu said:
Unbranded!
Click to expand...
Click to collapse
Ok, you'll get it soon enough.
Let the flashing begin.
Sent from the little guy
gastonw said:
Ok, you'll get it soon enough.
Let the flashing begin.
Sent from the little guy
Click to expand...
Click to collapse
But NO WIPING right?
First of all, i got my SGS2 2 days ago, switched over from iphone after 5 years, so don't judge me . I'm thrilled with SGS2, such a perfect phone. I got it unscratched, almost new. Browsing through the forums, i saw CM rom that i would like to install on my phone, but then ... I saw people talking about superbrick , so i installed eMMC check and saw it says that i got insane chip. My "About" screen gives following info:
Model number : GT-I9100
Android version : 4.0.4
Baseband version : I9100XXLQ6
Kernel version : 3.0.15-1157945 [email protected] #3 SMP PREEMPT Fri Oct 26 16:17:36 KST 2012
Build number : IMM76D.XWLQ2
My question is, how can i manage to install CM rom on my phone without bricking it ? I tried searching through the forums, not that i didn't , but im kinda unsure. Should i apply SiyahKernel S2-v5.0.1 through Odin first, and then try to apply CM 10.1 or even some stock rom or what ? Sorry to bother you, but i'm fairly new to android kernels/roms. Thanks in advance.
iriedread said:
First of all, i got my SGS2 2 days ago, switched over from iphone after 5 years, so don't judge me . I'm thrilled with SGS2, such a perfect phone. I got it unscratched, almost new. Browsing through the forums, i saw CM rom that i would like to install on my phone, but then ... I saw people talking about superbrick , so i installed eMMC check and saw it says that i got insane chip. My "About" screen gives following info:
Model number : GT-I9100
Android version : 4.0.4
Baseband version : I9100XXLQ6
Kernel version : 3.0.15-1157945 [email protected] #3 SMP PREEMPT Fri Oct 26 16:17:36 KST 2012
Build number : IMM76D.XWLQ2
My question is, how can i manage to install CM rom on my phone without bricking it ? I tried searching through the forums, not that i didn't , but im kinda unsure. Should i apply SiyahKernel S2-v5.0.1 through Odin first, and then try to apply CM 10.1 or even some stock rom or what ? Sorry to bother you, but i'm fairly new to android kernels/roms. Thanks in advance.
Click to expand...
Click to collapse
Yeap, right path. Siyah it is.
Sent from the little guy
gastonw said:
Yeap, right path. Siyah it is.
Sent from the little guy
Click to expand...
Click to collapse
Thanks a lot for fast reply . One last thing, can i apply any rom now or i gotta look out for some speciffic? If i gotta look at something speciffic, what would that be ?
Not sure what you mean but focus on flashing siyah. You'll be of the hook.
Sent from the little guy
gastonw said:
Not sure what you mean but focus on flashing siyah. You'll be of the hook.
Sent from the little guy
Click to expand...
Click to collapse
I meant, after applying siyah, i can install CyanogenMod 10.1 for example, or Resurrection Remix JB v3.1.3 ?
And can i root ? That would be all, don't wanna bother you anymore. Thanks :good:
You'll be rooted with siyah and yeah, you can flash those ROMs via CWM.
Sent from the little guy
BACKUP
But before doing anything don't forget to backup you default ROM.
I have done it in CWM recovery in the "backup and restore" .
It will create a folder in SD card -->clockworkmod--->backup ( I recommend to upload that whole folder somwhere USB maybe only to be sure if anything will happend to that SD card ) .
It saved me last time when I couldn't start the SII.
Honst3r said:
But before doing anything don't forget to backup you default ROM.
I have done it in CWM recovery in the "backup and restore" .
It will create a folder in SD card -->clockworkmod--->backup ( I recommend to upload that whole folder somwhere USB maybe only to be sure if anything will happend to that SD card ) .
It saved me last time when I couldn't start the SII.
Click to expand...
Click to collapse
oh, i do that right after i place siyah on my s2 , right ?
Of course.
1) Flash Siyah.
2) Backup ROM through CWM.
3) Backup all storage and apps using TiBu or Carbon.
4) Use nuke script to clean phone.
5) Flash new ROM.
6) ???
7) Profit.
Sent from my digital submersible hovercraft.
f-r said:
Of course.
1) Flash Siyah.
2) Backup ROM through CWM.
3) Backup all storage and apps using TiBu or Carbon.
4) Use nuke script to clean phone.
5) Flash new ROM.
6) ???
7) Profit.
Sent from my digital submersible hovercraft.
Click to expand...
Click to collapse
heheh, i kinda figured out the order after all the browsing through forums ;D . thanks for tips
UPDATE: flashed Siyah 4.1.5 from 2nd try. first time Odin stuck @ zImage, second time i tried with back usb port. After that it passed, works nicely now . Now im wondering if i should maybe put Siyah 5.0.1 and
GT-I9100 - Spain
PDA: I9100XWLSD
CSC: I9100FOPLS4
Version: 4.1.2
Date: 2013-02-04
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
or CM-10.1-20130213-NIGHTLY-i9100