First of all, i got my SGS2 2 days ago, switched over from iphone after 5 years, so don't judge me . I'm thrilled with SGS2, such a perfect phone. I got it unscratched, almost new. Browsing through the forums, i saw CM rom that i would like to install on my phone, but then ... I saw people talking about superbrick , so i installed eMMC check and saw it says that i got insane chip. My "About" screen gives following info:
Model number : GT-I9100
Android version : 4.0.4
Baseband version : I9100XXLQ6
Kernel version : 3.0.15-1157945 [email protected] #3 SMP PREEMPT Fri Oct 26 16:17:36 KST 2012
Build number : IMM76D.XWLQ2
My question is, how can i manage to install CM rom on my phone without bricking it ? I tried searching through the forums, not that i didn't , but im kinda unsure. Should i apply SiyahKernel S2-v5.0.1 through Odin first, and then try to apply CM 10.1 or even some stock rom or what ? Sorry to bother you, but i'm fairly new to android kernels/roms. Thanks in advance.
iriedread said:
First of all, i got my SGS2 2 days ago, switched over from iphone after 5 years, so don't judge me . I'm thrilled with SGS2, such a perfect phone. I got it unscratched, almost new. Browsing through the forums, i saw CM rom that i would like to install on my phone, but then ... I saw people talking about superbrick , so i installed eMMC check and saw it says that i got insane chip. My "About" screen gives following info:
Model number : GT-I9100
Android version : 4.0.4
Baseband version : I9100XXLQ6
Kernel version : 3.0.15-1157945 [email protected] #3 SMP PREEMPT Fri Oct 26 16:17:36 KST 2012
Build number : IMM76D.XWLQ2
My question is, how can i manage to install CM rom on my phone without bricking it ? I tried searching through the forums, not that i didn't , but im kinda unsure. Should i apply SiyahKernel S2-v5.0.1 through Odin first, and then try to apply CM 10.1 or even some stock rom or what ? Sorry to bother you, but i'm fairly new to android kernels/roms. Thanks in advance.
Click to expand...
Click to collapse
Yeap, right path. Siyah it is.
Sent from the little guy
gastonw said:
Yeap, right path. Siyah it is.
Sent from the little guy
Click to expand...
Click to collapse
Thanks a lot for fast reply . One last thing, can i apply any rom now or i gotta look out for some speciffic? If i gotta look at something speciffic, what would that be ?
Not sure what you mean but focus on flashing siyah. You'll be of the hook.
Sent from the little guy
gastonw said:
Not sure what you mean but focus on flashing siyah. You'll be of the hook.
Sent from the little guy
Click to expand...
Click to collapse
I meant, after applying siyah, i can install CyanogenMod 10.1 for example, or Resurrection Remix JB v3.1.3 ?
And can i root ? That would be all, don't wanna bother you anymore. Thanks :good:
You'll be rooted with siyah and yeah, you can flash those ROMs via CWM.
Sent from the little guy
BACKUP
But before doing anything don't forget to backup you default ROM.
I have done it in CWM recovery in the "backup and restore" .
It will create a folder in SD card -->clockworkmod--->backup ( I recommend to upload that whole folder somwhere USB maybe only to be sure if anything will happend to that SD card ) .
It saved me last time when I couldn't start the SII.
Honst3r said:
But before doing anything don't forget to backup you default ROM.
I have done it in CWM recovery in the "backup and restore" .
It will create a folder in SD card -->clockworkmod--->backup ( I recommend to upload that whole folder somwhere USB maybe only to be sure if anything will happend to that SD card ) .
It saved me last time when I couldn't start the SII.
Click to expand...
Click to collapse
oh, i do that right after i place siyah on my s2 , right ?
Of course.
1) Flash Siyah.
2) Backup ROM through CWM.
3) Backup all storage and apps using TiBu or Carbon.
4) Use nuke script to clean phone.
5) Flash new ROM.
6) ???
7) Profit.
Sent from my digital submersible hovercraft.
f-r said:
Of course.
1) Flash Siyah.
2) Backup ROM through CWM.
3) Backup all storage and apps using TiBu or Carbon.
4) Use nuke script to clean phone.
5) Flash new ROM.
6) ???
7) Profit.
Sent from my digital submersible hovercraft.
Click to expand...
Click to collapse
heheh, i kinda figured out the order after all the browsing through forums ;D . thanks for tips
UPDATE: flashed Siyah 4.1.5 from 2nd try. first time Odin stuck @ zImage, second time i tried with back usb port. After that it passed, works nicely now . Now im wondering if i should maybe put Siyah 5.0.1 and
GT-I9100 - Spain
PDA: I9100XWLSD
CSC: I9100FOPLS4
Version: 4.1.2
Date: 2013-02-04
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
or CM-10.1-20130213-NIGHTLY-i9100
Related
Hi there! I hope someone can enlighten me. I've never been able to update my SII since I got it, now it's almost a year ago in Belgium (so I'm stuck with GB 2.3.3). KIES says I've got the latest firmware version, and I get the same thing via FOTA.
Now it seems as if ICS provides some battery saving, among some other features, so I'd like to update the firmware (at least for once!)
I would like to avoid rooting, flashing and so on... although it seems as that's the most practical way to follow
So, thanks a lot in advance to anyone who could help me
yo
I'm a mac user, btw.
Here's the device ifo, in case it helps:
PDA I9100XWKF3
PHONE I9100XXKE7
CSC I9100LUXKD3
Build Info: Thu Jun 9 18:16:44 KST 2011
Android version 2.3.3
Kernel [email protected] #2
GINGERBREAD.XWKF3
yogismo said:
Hi there! I hope someone can enlighten me. I've never been able to update my SII since I got it, now it's almost a year ago in Belgium (so I'm stuck with GB 2.3.3). KIES says I've got the latest firmware version, and I get the same thing via FOTA.
Now it seems as if ICS provides some battery saving, among some other features, so I'd like to update the firmware (at least for once!)
I would like to avoid rooting, flashing and so on... although it seems as that's the most practical way to follow
So, thanks a lot in advance to anyone who could help me
yo
I'm a mac user, btw.
Here's the device ifo, in case it helps:
PDA I9100XWKF3
PHONE I9100XXKE7
CSC I9100LUXKD3
Build Info: Thu Jun 9 18:16:44 KST 2011
Android version 2.3.3
Kernel [email protected] #2
GINGERBREAD.XWKF3
Click to expand...
Click to collapse
check the link below it has all info regarding ICS ver region vise and also install instruction
http://forum.xda-developers.com/showthread.php?t=1075278
your CSC is LUX, whic already recieved the ICS updated, donno wot happened in your case...
LUX = LUXEMBURG
ref: http://androidforums.com/samsung-galaxy-s2-international/523455-ics-csc-you-eligible-update.html
Sun90 said:
check the link below it has all info regarding ICS ver region vise and also install instruction
http://forum.xda-developers.com/showthread.php?t=1075278
Click to expand...
Click to collapse
Thanks pal, this is the kind of stuff I've been seeing around and would like to avoid!
ZACQ8 said:
your CSC is LUX, whic already recieved the ICS updated, donno wot happened in your case...
LUX = LUXEMBURG
That's my point exactly. The update is available already in the area but for some reason my device has not been able to update the firmware since I bought it (not even for later versions of GingerBread) :S
Click to expand...
Click to collapse
yogismo said:
Hi there! I hope someone can enlighten me. I've never been able to update my SII since I got it, now it's almost a year ago in Belgium (so I'm stuck with GB 2.3.3). KIES says I've got the latest firmware version, and I get the same thing via FOTA.
Now it seems as if ICS provides some battery saving, among some other features, so I'd like to update the firmware (at least for once!)
I would like to avoid rooting, flashing and so on... although it seems as that's the most practical way to follow
So, thanks a lot in advance to anyone who could help me
yo
I'm a mac user, btw.
Here's the device ifo, in case it helps:
PDA I9100XWKF3
PHONE I9100XXKE7
CSC I9100LUXKD3
Build Info: Thu Jun 9 18:16:44 KST 2011
Android version 2.3.3
Kernel [email protected] #2
GINGERBREAD.XWKF3
Click to expand...
Click to collapse
Go to www.sammobile.com download a stock firmware update and flash through odin. There's lots of guides on the site about flashing steps.
Sent from my GT-I9100 using xda premium
Argh
kilometers4 said:
Go to sammobile download a stock firmware update and flash through odin. There's lots of guides on the site about flashing steps.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
OK, I've tried that and odin is not recognizing my phone... The firmware is there, I'm in download mode. I've switched usb ports... This is a bloody nightmare!
Last week I told a friend of ñine to try to update hers and she did it straight away through FOTA... and she had bought it only 6 months after me! What a bunch of wankers these Koreans!
friend of mine had the same problem with his s2, i found out his problem was caused by his phone being locked to a provider and because of this he had different kernel from me. he got update several months after me...
this because of provider's own extra apps on the phone...!
Just flash via Odin
http://forum.xda-developers.com/showthread.php?t=1075278
http://forum.xda-developers.com/showthread.php?t=1544487
yogismo said:
OK, I've tried that and odin is not recognizing my phone... The firmware is there, I'm in download mode. I've switched usb ports... This is a bloody nightmare!
Last week I told a friend of ñine to try to update hers and she did it straight away through FOTA... and she had bought it only 6 months after me! What a bunch of wankers these Koreans!
Click to expand...
Click to collapse
Make sure you have the drivers installed and Kies is closed before you open Odin
Sent from my GT-I9100 using xda premium
I'm trying to reset my s2 st-i9100 back to stock (encrypted the phone, can't mount sd card, can't flash new roms, need to reset in order to get sd card access back)
I saw the thread with list of official firmwares I have no idea which I should download and flash, I won't lie, the descriptions don't make much sense to me.
Any help would be much appreciated
Do you want a link for the "telepathic stock" one.
Sent from my GT-I9100 using Tapatalk 2
theunderling said:
Do you want a link for the "telepathic stock" one.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I don't get it
Maybe if you post the details about your phone someone can tell you which one you need and how to install it.
You see luv,there are a lot of variables/variations regarding the process.
Sent from my GT-I9100 using Tapatalk 2
Mind reading is hard
Trace6x said:
I don't get it
Click to expand...
Click to collapse
I live in ___________
My phone carrier is __________
Add text to those blank areas and we have information
theunderling said:
Maybe if you post the details about your phone someone can tell you which one you need and how to install it.
You see luv,there are a lot of variables/variations regarding the process.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
right sorry
UK with Giffgaff (o2) it might have been originally locked to another network I can't quite remember
gti9100
android 4.0.4
baseband v I9100XXKI1
Kernel Version
3.0.32-CMg12ef675
[email protected] #1
SMP PREEMPT Tue jun 26 06:15:35 PDT 2012
cyanogenmod v 9.0.0-rc1-galaxys2
build no
cm_galays2-userdebug 4.0.4 IMM76L
eng.jenkins.201200626.060555 test-keys
Anything else?
Trace6x said:
right sorry
gti9100
android 4.0.4
baseband v I9100XXKI1
Kernel Version
3.0.32-CMg12ef675
[email protected] #1
SMP PREEMPT Tue jun 26 06:15:35 PDT 2012
cyanogenmod v 9.0.0-rc1-galaxys2
build no
cm_galays2-userdebug 4.0.4 IMM76L
eng.jenkins.201200626.060555 test-keys
Anything else?
Click to expand...
Click to collapse
Are you trying to flash a stock rom?
For stock roms go to this thread & flash UHLPS
http://forum.xda-developers.com/showthread.php?t=1544487
Barbiox Dogg said:
Are you trying to flash a stock rom?
For stock roms go to this thread & flash UHLPS
http://forum.xda-developers.com/showthread.php?t=1544487
Click to expand...
Click to collapse
I'm actually trying to follow these instructions:
1) Use the All-in-One-Kit and flash your recovery back to stock
2) Boot into the bootloader and choose to "clear storage" and afterwards to reset to factory defaults.
3) Go back to the all-in-one-kit and flash a CWM recovery version again.
4) Reboot into recovery (CWM). Your /sdcard should now be mounted and visible.
I don't know what the all in one kit is so I'm just trying to find a stock rom to flash and hope that that will work
Trace6x said:
I'm actually trying to follow these instructions:
1) Use the All-in-One-Kit and flash your recovery back to stock
2) Boot into the bootloader and choose to "clear storage" and afterwards to reset to factory defaults.
3) Go back to the all-in-one-kit and flash a CWM recovery version again.
4) Reboot into recovery (CWM). Your /sdcard should now be mounted and visible.
I don't know what the all in one kit is so I'm just trying to find a stock rom to flash and hope that that will work
Click to expand...
Click to collapse
Follow the instructions in the link i provided. That's what i always use whenever i want to go back to stock rom. Remember to wipe/data factory reset before proceeding or you will end up in boot loop.
Barbiox Dogg said:
Follow the instructions in the link i provided. That's what i always use whenever i want to go back to stock rom. Remember to wipe/data factory reset before proceeding or you will end up in boot loop.
Click to expand...
Click to collapse
Thanks will do, only thing is you one you said is described as
Region: South America
Country Argentina
should I not be downloading an English one or does it not matter?
Trace6x said:
Thanks will do, only thing is you one you said is described as
Region: South America
Country Argentina
should I not be downloading an English one or does it not matter?
Click to expand...
Click to collapse
It does not matter, the rom is in English.
However you may feel like installing a United Kingdom or Nordic countries rom but don't download roms that
has modem XXLQ6 because they are known to brick devices.
Barbiox Dogg said:
It does not matter, the rom is in English.
However you may feel like installing a United Kingdom or Nordic countries rom but don't download roms that
has modem XXLQ6 because they are known to brick devices.
Click to expand...
Click to collapse
ok thank you! I don't plan on keeping the rom anyway, just want to make sure nothing goes wrong
thanks again, after flashing multiple times (and formatting the internal storage) I've finally gotten it fixed. I think the problem I was having was to do with the phone encryption and the fact that I was trying to mount an external sd card when I didn't have one in the phone, flashing to stock, wiping and formatting and then reinstalling clockwork seemed to work, I then installed cm9 (although I've lost everything)
Thanks for the help!
Hi all,
well, I've read the site rules and watched carefully the video... I fully admit that I'm a noob and I'm ready to live with this status for a while
Despite this, I'll anyway post my questions, and I'm really grateful in advance for any help.
I want to root my SGS2 because I would like to install some specific apps and why not to change the rom to have something more "serious".
My actual config is as follow:
GT-I9100
Android version: 4.0.4
Base band: I9100BULP8
Kernel version: 3.0.15-1056084 [email protected] #3 SMP PREEMPT Thu Sep 13
Built: IMM76D.BULPG
I'm really not familiar with all terms used in the android space, I read several threads looking for a rooting manual and found quite good stuff. My actual worry is that I'm unable to find something (cf_root etc...) to use matching with my actual installed levels, can someone point me out on a sure rooted stuff and how to.
I don't want to have my phone out of order, this is the reason for this post. As stated I got confused and got lost with the wording used, ex: don't use this rom because if you have the eMMC chip with VYL00M (my case) etc... That's why thanks in advance !
Mo
you can flash siyah from this thread :
http://forum.xda-developers.com/showthread.php?t=1555259
its safe, got no eMMc erase bug...
Flashing siyah will gain you root after which you can flash any Rom of your choice..
Dont forget to make a nandroid backup..
cheers
kjplasma said:
you can flash siyah from this thread :
http://forum.xda-developers.com/showthread.php?t=1555259
its safe, got no eMMc erase bug...
Flashing siyah will gain you root after which you can flash any Rom of your choice..
Dont forget to make a nandroid backup..
cheers
Click to expand...
Click to collapse
Lol the poor guy ain't good with technical words, you see your current version of kernel probably has a serious issue called a brick bug, it renders the phone unusable and recovery is a hassle in case of soft brick, hard brick situation is unrecoverable. Install got brick bug app by chainfire and check whether you are vulnerable so you can be more cautious, installing cm roms and certain other roms are safe, before flashing you must check whether it is effected by eMMc brick bug, and do not perform any erase activity if you are effected by the bug.
Peace
Edit : If you are effected install via Odin only. And this bug is present only in ICS Roms currently, if you are in gb you are safe, and be careful about flashing stock ICS use safe custom roms which has eMMc Cap erase disabled.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
Hi,
thank you both for your answers, Siyah looks a good alternative. Is there a specific version to use ?
Is installing a CF-root a more straight forward process ? Assuming to find the right one...
Thanks again
Mo
MoThan08 said:
Hi,
thank you both for your answers, Siyah looks a good alternative. Is there a specific version to use ?
Is installing a CF-root a more straight forward process ? Assuming to find the right one...
Thanks again
Mo
Click to expand...
Click to collapse
Siyah is the best alternative for u ma8, as its brick bug free for sure and beeing the best kernel to root with gr8 success
u dwnld the tar file of siyah version 4.1.5 for S2 and flash the same by putting the file in 'PDA' section of 'ODIN' to root ur phone
u can google for lot of Youtube Video guides avilable for ODIN flash on ur s2
You can flash This from stock recovery (place the file in SD Card) and flash via stock recovery , then flash any custom Rom if you want to try JB , try NeatROM Lite v4.0 , after flashing this , you can just flash latest PhilZ Kernel v3.75 (Link in my signature )
Thanks for your help,
a last question (I hope) why the 4.1.5 version instead of the 5.0.1 ?
Stability issues ?
Have a good day
M
MoThan08 said:
Thanks for your help,
a last question (I hope) why the 4.1.5 version instead of the 5.0.1 ?
Stability issues ?
Have a good day
M
Click to expand...
Click to collapse
first root ur phone using v4.1.5 and then upgrade it to v5.0.1
i dislike the siyah v5.0.1..best to use siyah 4.1.5
so basically steps:
1. Install clockwork mode recovery(CWM) through recovery mode
2. Install siyah 4.1.5 by installing zip from sd card
3. now install any rom of your choice and enjoy
OK I am a NOOB too but need some clarification I just replaced my i9100 do to a brick bug so I gotta get this right. I just checked the replaced motherboard and sure enough it also has the bug SO, I need to know as it does seem quite clear already but only say 90% so to make it ABSOLUTELY CLEAR in order to avoid the bug I simply have to use siyah 4.1.5 and then I am free to flash whatever, GB + ICS + JB / 4.0.4 , 4.1.1 whatever the bug ONLY applys to my understanding (correct me here) with stock recovery and original ICS kernel.
NEXT NOOB question often ROM's pack in a kernel what things could bring back a dangerous situation. Flashing ROM's ? (maybe include a dangerous kernel or something ?).... 2: apps? can I ever factory data wipe safely again or with siyah after the previous protocol is it safe ? ?
:silly::silly:Also really Confused !?!?!?!:silly::silly:
aviral1990 said:
i dislike the siyah v5.0.1..best to use siyah 4.1.5
so basically steps:
1. Install clockwork mode recovery(CWM) through recovery mode
2. Install siyah 4.1.5 by installing zip from sd card
3. now install any rom of your choice and enjoy
Click to expand...
Click to collapse
Hey all,
just to let you know the status. I installed Siyah 4.1.5 using Odin as advised by Sun90 and everything went perfectly smooth.
Thank you !
I think my mext move will be first to install a good backup tool then to scout for other rom like cyanogen etc...
@futiless,
as I said using Odin, it's safe ! I read that dual boot is now available with the latest version of Siyah, that could be the answer for trying new roms while preserving a working one. For sure I'll test it.
Thanks again for your help
M
hey, this is sort of a nooby question , so i apoligize in advance, but i have rooted my galaxy s2 with Siyah Kernel v4.0.1 and i am now wanting to put on a ROM preferablly NeatRom Lite, but most of the guides i have found were pretty confusing, and do i have to have a sd card for the rom? thanks ..
oh and these are my detail on the "about phone"
android version : 4.0.4
baseband version: I9100XXLQ6
kernel version : [email protected]#2 SMP PREEMPT tue aug 7 04:20:49 PDT 2012
build number IMM76D.XXLPW
yassterday said:
hey, this is sort of a nooby question , so i apoligize in advance, but i have rooted my galaxy s2 with Siyah Kernel v4.0.1 and i am now wanting to put on a ROM preferablly NeatRom Lite, but most of the guides i have found were pretty confusing, and do i have to have a sd card for the rom? thanks ..
oh and these are my detail on the "about phone"
android version : 4.0.4
baseband version: I9100XXLQ6
kernel version : [email protected]#2 SMP PREEMPT tue aug 7 04:20:49 PDT 2012
build number IMM76D.XXLPW
Click to expand...
Click to collapse
Confusing how?
yassterday said:
hey, this is sort of a nooby question , so i apoligize in advance, but i have rooted my galaxy s2 with Siyah Kernel v4.0.1 and i am now wanting to put on a ROM preferablly NeatRom Lite, but most of the guides i have found were pretty confusing, and do i have to have a sd card for the rom? thanks ..
oh and these are my detail on the "about phone"
android version : 4.0.4
baseband version: I9100XXLQ6
kernel version : [email protected]#2 SMP PREEMPT tue aug 7 04:20:49 PDT 2012
build number IMM76D.XXLPW
Click to expand...
Click to collapse
You don't need an external sd-card. Just (carefully) read the instructions in the specific Neatrom-thread. They're there to be followed, and they include every step. Good luck.
Donnie Sins said:
You don't need an external sd-card. Just (carefully) read the instructions in the specific Neatrom-thread. They're there to be followed, and they include every step. Good luck.
Click to expand...
Click to collapse
ye but most of the neatrom threads arnt my type of version like my one is xwlpw, none of the neatrom threads have that version?
yassterday said:
ye but most of the neatrom threads arnt my type of version like my one is xwlpw, none of the neatrom threads have that version?
Click to expand...
Click to collapse
Here are some good threads u can read:
http://forum.xda-developers.com/showthread.php?t=2181404
http://forum.xda-developers.com/showthread.php?t=1125282
Flashing custom ROMs are for advanced users, so please read before you leap. You dont wanna brick ur device now, do u?
"To err is human, to forgive is divine"
Sent from my SGS II
yassterday said:
ye but most of the neatrom threads arnt my type of version like my one is xwlpw, none of the neatrom threads have that version?
Click to expand...
Click to collapse
It's not a case of searching for a thread that matches your current version, but looking for a new rom with the version YOU want. So if you're on LPW, follow the instructions on the Neatrom-thread, flash the new rom you want and you're done.
And indeed, first read a little bit more, because most people brick their devices as a result of not knowing what they're doing.
Good luck.
Come to the dark side and custom rom it. If you have Cwm its a easy thing to do. Look up how to install a custom rom. I thought that dual booting was hard. if you read read read then it's easy. If you do want a custom rom look on goo.im app on play store.
Pacman v21 Dorimanx8.1
Hello,
I'm french user with a S2 GT-I9100, with 4.1.2 samsung android rom...
Each day, my phone become very slowly slowly slowly..
*#1234# give me that :
PDA - I9100XWLSN
PHONE - I9100XXMS2
CSC - I9100XXLS8
Build Info : True Mar 19 18:57:45 KST 2013
I would like to reset the phone, with the last original Samsung Firmware for French user, with all the Samsung apk...
Could you give me a link ? I don't know which firmware to use, CWM, Modem and Kernel.
If you have a tutorial for me...
Which firmware is the last ?
I wanted to use Kies for update the phone but it only can see that i have a GT-I9100 when i connect it to pc, but the connexion failed each time...
Then, i need your help, because it's my wife phone and she never used it without bug... (and she wanted a iphone...)
Cordially.
xxx74 said:
Hello,
I'm french user with a S2 GT-I9100, with 4.1.2 samsung android rom...
Each day, my phone become very slowly slowly slowly..
*#1234# give me that :
PDA - I9100XWLSN
PHONE - I9100XXMS2
CSC - I9100XXLS8
Build Info : True Mar 19 18:57:45 KST 2013
I would like to reset the phone, with the last original Samsung Firmware for French user, with all the Samsung apk...
Could you give me a link ? I don't know which firmware to use, CWM, Modem and Kernel.
If you have a tutorial for me...
Which firmware is the last ?
I wanted to use Kies for update the phone but it only can see that i have a GT-I9100 when i connect it to pc, but the connexion failed each time...
Then, i need your help, because it's my wife phone and she never used it without bug... (and she wanted a iphone...)
Cordially.
Click to expand...
Click to collapse
This question has been asked at least one only this week.SEARCH!
GamingDj said:
This question has been asked at least one only this week.SEARCH!
Click to expand...
Click to collapse
Many thanks, Senior Member...
xxx74 said:
Many thanks, Senior Member...
Click to expand...
Click to collapse
BTW,latest stable firmware is XWLSS.Search on Sammobile,the on XDA how to flash.
GamingDj said:
BTW,latest stable firmware is XWLSS.Search on Sammobile,the on XDA how to flash.
Click to expand...
Click to collapse
Nope it's the xwlsu version which is the newest now.
Edit :it comes with fixes for camera and overheating issues.
Sent from my GT-I9100 using xda app-developers app