So my rezound is stuck in Hboot, only boots to Hboot. I tried the update yet again and this time it is really screwed up. I can't flash anything in adb commands/fastboot commands. My Hboot screen reads:
Unlocked
VIGOR PVT SHIP S-OFF RL
HBOOT- 2.27.0000
eMMC-boot
Aug 6 2012, 19:24:37
I tried re-flashing a different Hboot, that would not take. Could not flash recovery, and it fails every time I try to flash the RUU, either 3.14.605.12 0r the either of the new 4.xxx.xxx.xx.
Any help would be nice, Thanks
edit: When I try to flash firmware or RUU it starts to update, but it says Fail-PU next to everything. When I try to flash from command prompt it says image update error
tomtripp21 said:
So my rezound is stuck in Hboot, only boots to Hboot. I tried the update yet again and this time it is really screwed up. I can't flash anything in adb commands/fastboot commands. My Hboot screen reads:
Unlocked
VIGOR PVT SHIP S-OFF RL
HBOOT- 2.27.0000
eMMC-boot
Aug 6 2012, 19:24:37
I tried re-flashing a different Hboot, that would not take. Could not flash recovery, and it fails every time I try to flash the RUU, either 3.14.605.12 0r the either of the new 4.xxx.xxx.xx.
Any help would be nice, Thanks
edit: When I try to flash firmware or RUU it starts to update, but it says Fail-PU next to everything. When I try to flash from command prompt it says image update error
Click to expand...
Click to collapse
Your hboot is not showing any radio???
Start fresh with a new download:
Go here: http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/ and download the latest RUU. Place it on your sd card, check MD5, and rename it to ph98img.zip . Reboot into bootloader and it should flash it.
topgun1953 said:
Your hboot is not showing any radio???
Start fresh with a new download:
Go here: http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/ and download the latest RUU. Place it on your sd card, check MD5, and rename it to ph98img.zip . Reboot into bootloader and it should flash it.
Click to expand...
Click to collapse
Tried it and it did not work. Still Fail-PU next to everything. The only thing that is successful is #16 TP.
If you are reinstalling a Leak RUU you need to relock your bootloader.
troy7548 is right. Relock your bootloader and the latest RUU should flash fine (I'd do the most up-to-date one). Since you are S-OFF you don't need your BL unlocked. After you've gotten the RUU installed and everything boots, Delete the zip from your card then flash this firmware:
http://forum.xda-developers.com/showthread.php?t=1843030
This will give you the latest firmware but re-enable fastboot commands on the locked S-OFF bootloader.
MisterKrispy said:
troy7548 is right. Relock your bootloader and the latest RUU should flash fine (I'd do the most up-to-date one). Since you are S-OFF you don't need your BL unlocked. After you've gotten the RUU installed and everything boots, Delete the zip from your card then flash this firmware:
http://forum.xda-developers.com/showthread.php?t=1843030
This will give you the latest firmware but re-enable fastboot commands on the locked S-OFF bootloader.
Click to expand...
Click to collapse
I've tried locking the bootloader, but my fastboot commands are all failing, so basically I cannot relock the bootloader using fastboot oem lock command....
Did you update you adb
Sent from my ADR6425LVW using XDA Premium App
Going to try Unbricking Process....
Think I'm going to try the Unbricking process posted in the forum. Nothing else seems to work, so what do I have to loose? Any opinions?
troy7548 said:
Did you update you adb
Sent from my ADR6425LVW using XDA Premium App
Click to expand...
Click to collapse
Yes my adb is up to date.
Related
While trying to restore my Rezound to Stock, I was able to Relock the bootloader but then I haven't been able to get past the Hboot or Fastboot screens to load the ROM. I can't get to recovery or anything. I've tried loading the recovery by using "fastboot flash recovery recovery.img". For some reason it fails. I have the recovery file in the same place as the fastboot file. I'm not sure why it doesn't work. What should I do next, been trying for hours now to get a ROM to boot up... Thanks for your help!
alphaman0606 said:
While trying to restore my Rezound to Stock, I was able to Relock the bootloader but then I haven't been able to get past the Hboot or Fastboot screens to load the ROM. I can't get to recovery or anything. I've tried loading the recovery by using "fastboot flash recovery recovery.img". For some reason it fails. I have the recovery file in the same place as the fastboot file. I'm not sure why it doesn't work. What should I do next, been trying for hours now to get a ROM to boot up... Thanks for your help!
Click to expand...
Click to collapse
you cant flash a recovery file while the bootloader is locked.
Are you on the latest OTA? ICS Leak?
You probably don't have the correct kernel installed. Coming from ICS to GB I'm assuming?
Sent from my Transformer TF101 using Tapatalk 2
You need to unlock again before flashing a recovery
Sent from my Dinc... I mean Rezound
Thanks! It's working now...
Thanks guys! I just had to unlock again and the phone booted up fine! Now I just have to find where I went wrong trying to go back to stock. I believe I may have the wrong "tools" in my root folder?
Go into hboot and type in everything starting at the top. With this info we can help you further.
Sent from my ADR6425LVW using XDA
If you want to go back to stock, you can lock the bootloader and RUU. You'll have to use whatever version your firmware is currently on (so if you flashed the ICS firmware, you would have to use that RUU, if you're on older firmware, flash whatever GB one you're on).
Edit: You can flash to a newer RUU too, obviously, you just won't be able to go backwards again later.
If you have a custom boot image (kernel) or recovery (I think) then the stock locked hboot will have a ***SECURITY WARNING*** and will not allow you to boot. You can still RUU from this state. Unlocking the bootloader will allow you to boot. I believe you cannot RUU from an unlocked bootloader, but I don't remember for sure.
Snuzzo said:
Go into hboot and type in everything starting at the top. With this info we can help you further.
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
Here's what's at the top since I got it unlocked again...
***UNLOCKED***
VIGOR PVT SHIP S-ON RL
HBOOT-2.10.0000
eMMC-boot
Oct 5, 2011, 21:18:48
I know I have probably came across the answer BUT I just want to double triple check before doing anything. I tend to look to deep into things and make it harder than it needs to be. SO PLEASE DO NOT BE RUDE!
HBOOT:
=JUOPUNUTBEAR=
HTC AMAZE
RUBY PVT SHIP S-OFF RL
HBOOT- 1.93.2222
eMMC-boot
MAR 15, 2012
1) I am on gingerbread. S-OFF but not rooted. I have a T-mobile OTA update for ICS. Can I download safely?
What I was going to do is just download that and un-root it the same way I did when doing the S-OFF process. Can't it just be that easy!
2) If not is this the correct way that will work with JUOPUNUT bear?
Quote:
Originally Posted by electronicrice
1) Be Locked with S-Off using JuopunutBear's S-Off method.
2) Flash the ENG Hboot 1.90.2005 (rename to ph85img.zip and boot to bootloader)
3) With S-off and the ENG Hboot, rename the RUU to PH85IMG.zip and put on root of external SD card
4) Boot into bootloader and apply the update
5) Once updated, reflash the ENG Hboot again
6) Flash the CWM 5.5.0.4 recovery in fastboot (fastboot flash recovery *****.img)
7) Flash the Superuser package in recovery to gain root
3) If #2 is a yes then I lock HBOOT even though it is Juopunut Bear, using Hasoon2000's all in one kit? OOORRR does JuopuntBear's S-OFF method automatically do that?
OR stop looking so deep into it. Root it as gingerbread, flash recovery, download rom (after wiping...LOL)
THANK YOU FOR YOUR TIME AND HELP!
oncl0wd9 said:
I know I have probably came across the answer BUT I just want to double triple check before doing anything. I tend to look to deep into things and make it harder than it needs to be. SO PLEASE DO NOT BE RUDE!
HBOOT:
=JUOPUNUTBEAR=
HTC AMAZE
RUBY PVT SHIP S-OFF RL
HBOOT- 1.93.2222
eMMC-boot
MAR 15, 2012
1) I am on gingerbread. S-OFF but not rooted. I have a T-mobile OTA update for ICS. Can I download safely?
What I was going to do is just download that and un-root it the same way I did when doing the S-OFF process. Can't it just be that easy!
2) If not is this the correct way that will work with JUOPUNUT bear?
Quote:
Originally Posted by electronicrice
1) Be Locked with S-Off using JuopunutBear's S-Off method.
2) Flash the ENG Hboot 1.90.2005 (rename to ph85img.zip and boot to bootloader)
3) With S-off and the ENG Hboot, rename the RUU to PH85IMG.zip and put on root of external SD card
4) Boot into bootloader and apply the update
5) Once updated, reflash the ENG Hboot again
6) Flash the CWM 5.5.0.4 recovery in fastboot (fastboot flash recovery *****.img)
7) Flash the Superuser package in recovery to gain root
3) If #2 is a yes then I lock HBOOT even though it is Juopunut Bear, using Hasoon2000's all in one kit? OOORRR does JuopuntBear's S-OFF method automatically do that?
OR stop looking so deep into it. Root it as gingerbread, flash recovery, download rom (after wiping...LOL)
THANK YOU FOR YOUR TIME AND HELP!
Click to expand...
Click to collapse
You have two options:
1. Restore the stock recovery and proceed with the update, it won't do anything but update the system files, it may or may not remove the JB hboot, though I recommend you restore the stock GB hboot since updates tend to cancel when the hboot is higher than the one being installed, which the JB hboot version is set higher so as to prevent any new updates from over writing it.
or
2. Download the stock ICS ruu from the ruu/ota thread and install it via hboot by renaming the file PH85IMG and placing it on your sd card.
No reason to get suspicious, it's okay.
Dark Nightmare said:
You have two options:
1. Restore the stock recovery and proceed with the update, it won't do anything but update the system files, it may or may not remove the JB hboot, though I recommend you restore the stock GB hboot since updates tend to cancel when the hboot is higher than the one being installed, which the JB hboot version is set higher so as to prevent any new updates from over writing it.
or
2. Download the stock ICS ruu from the ruu/ota thread and install it via hboot by renaming the file PH85IMG and placing it on your sd card.
No reason to get suspicious, it's okay.
Click to expand...
Click to collapse
Ok... I'm going to go with option 2... just flash PH85IMG RUU via hboot and voila?
oncl0wd9 said:
Ok... I'm going to go with option 2... just flash PH85IMG RUU via hboot and voila?
Click to expand...
Click to collapse
Yup, just make sure u lock your bootloader first or the ph85img won't install
sent from my NRGized Amaze,
powered by faux kernel v.16
aj_2423 said:
Yup, just make sure u lock your bootloader first or the ph85img won't install
sent from my NRGized Amaze,
powered by faux kernel v.16
Click to expand...
Click to collapse
Ok sooo.... Bare with me please...
I locked the bootloader.
HBOOT is now 1.90.2005.
I flashed an OTA/RUU after that, and renamed it to PH85IMG (did not add .zip just an easy r click rename). It went through the upload/download (whatever ya wanna call it!) In hboot
Rebooted aaanddd I am still on GB
I used the OTA from this thread http://forum.xda-developers.com/showthread.php?t=1575550&highlight=stock+ics+ruu and followed the 2nd post for the leaked ota....
I AM missing something. Somewhere down the line. Or wrong RUU? Suggestions? I am going to be back tomorrow to work on this.
Thanks again guys
oncl0wd9 said:
Ok sooo.... Bare with me please...
I locked the bootloader.
HBOOT is now 1.90.2005.
I flashed an OTA/RUU after that, and renamed it to PH85IMG (did not add .zip just an easy r click rename). It went through the upload/download (whatever ya wanna call it!) In hboot
Rebooted aaanddd I am still on GB
I used the OTA from this thread http://forum.xda-developers.com/showthread.php?t=1575550&highlight=stock+ics+ruu and followed the 2nd post for the leaked ota....
I AM missing something. Somewhere down the line. Or wrong RUU? Suggestions? I am going to be back tomorrow to work on this.
Thanks again guys
Click to expand...
Click to collapse
If you're s-off you don't need to lock the bootloader, anyways, don't use that file, look for the ruu/ota collection thread in tue dev forum for the latest file, rename it, make sure it's on the root of your sd card.
sent from a galaxy you'll never see.
I FINALLY got it ... Thanks guys for your help!
:victory:
i rooted my girlfriends sprint evo 3d using unknownforce's down grade method, i wanna return her phone back to complete stock how would i do that? she is s-off right now. thanks for the advice
You could flash an ruu from bootloader since your s-off. Here's a link for a list of ruu pick the one that says ics shooter 35 s 2.89 1.09.00.0706 spcs wwe to that nature http://www.filefactory.com/f/4ef0ef536face67a/. Just remember to rename the file PG86IMG in all caps and place on the root of your sdcard. Power down your phone, and boot up into bootloader and let your phone detect the file and confirm to update. Next you might want to get a drink or something to eat. It'll take like 10 minutes. Hope that helps
Jsparta26 said:
You could flash an ruu from bootloader since your s-off. Here's a link for a list of ruu pick the one that says ics shooter 35 s 2.89 1.09.00.0706 spcs wwe to that nature http://www.filefactory.com/f/4ef0ef536face67a/. Just remember to rename the file PG86IMG in all caps and place on the root of your sdcard. Power down your phone, and boot up into bootloader and let your phone detect the file and confirm to update. Next you might want to get a drink or something to eat. It'll take like 10 minutes. Hope that helps
Click to expand...
Click to collapse
that will revert the s-off to right?
wikedone said:
that will revert the s-off to right?
Click to expand...
Click to collapse
No.
You need to issue the "fastboot oem writescureflag 3" command with the phone in fastboot USB mode after flashing the RUU to reset the S-OFF status to S-ON. Make sure you have the stock bootloader installed before you do that.
ramjet73
ramjet73 said:
No.
You need to issue the "fastboot oem writescureflag 3" command with the phone in fastboot USB mode after flashing the RUU to reset the S-OFF status to S-ON. Make sure you have the stock bootloader installed before you do that.
ramjet73
Click to expand...
Click to collapse
ok the file i downloaded is RUU_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1.09.00.0706__NV_NV_SPCS_1.43_release_271101_signed.exe i just rename that to PG86IMG or what cuz when i run the ruu in windows it errors out with usb connectio error
wikedone said:
ok the file i downloaded is RUU_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1.09.00.0706__NV_NV_SPCS_1.43_release_271101_signed.exe i just rename that to PG86IMG or what cuz when i run the ruu in windows it errors out with usb connectio error
Click to expand...
Click to collapse
The .exe version of the RUU needs to be run from Windows. Make sure your phone is in the "fastboot usb" mode in the bootloader and the "fastboot devices" command returns your serial number before you run the RUU.
There's also a .zip version of the RUU around somewhere on these forums that can be run from the bootloader, but I don't have a link to that. It would be safer to extract it yourself from the RUU.exe using this procedure.
ramjet73
ramjet73 said:
The .exe version of the RUU needs to be run from Windows. Make sure your phone is in the "fastboot usb" mode in the bootloader and the "fastboot devices" command returns your serial number before you run the RUU.
There's also a .zip version of the RUU around somewhere on these forums that can be run from the bootloader, but I don't have a link to that. It would be safer to extract it yourself from the RUU.exe using this procedure.
ramjet73
Click to expand...
Click to collapse
ok i got the ruu to run and the phone is updated to ICS the hboot says
*** LOCKED ***
SHOOTER XC SHIP S-OFF RL
HBOOT-1.58.0000
RADIO-1.09.00.0706
OpenADSP-v02.6.0.2226.00.0217
eMMC-boot
May 17 2012, 15:06:44
How do i know if i have the stock bootloader so i can Make it S-On
wikedone said:
ok i got the ruu to run and the phone is updated to ICS the hboot says
*** LOCKED ***
SHOOTER XC SHIP S-OFF RL
HBOOT-1.58.0000
^^^^^^^^^^^
How do i know if i have the stock bootloader so i can Make it S-On
Click to expand...
Click to collapse
That's the stock bootloader, which was installed by the RUU. Most of the custom bootloaders (Revolutionary, Juopunutbear) have their name where the "*** LOCKED ***" status shows on your phone.
ramjet73
It's also courtesy to hit the thank you button when someone has helped you (meaning ramjet) Just thought I would throw that out.
Hi
I am stuck on the bootloader, because:
- I unlocked via htcdev online
- installed CWM recovery
- I tried to install custom roms update-ics-yetki-1.0.zip LeeDrOiD-Flyer-V2.2.0.zip (unfortunately with s-on)
result: black screen on system boot, unable to go further than bootloader or recovery.
after relocking I tried to run :
RUU_Flyer_TMO_DE_2.27.111.1_Radio_20.3504.30.089BU_3809.07.04.06_M_release_204120_signed.exe
some errors on installing like 140, bootloader error
so I am not sure if this is the good RUU
before bricking my Flyer definitely I would like to know how can I know which is right RUU for my device to install?
The only information about my device I can get are those:
Flyer pvt ship S-ON RL
HBOOT 1.11.0011
MICROP - 0950
RADIO-3822.11.08.07M2
eMMC-boot
Oct 25 2011, 16:55:07
the device has (had) a T-Mobile (Germany) branding
cid: T-MOB101
version-main: 3.55.111.1
anyone a clue?
Thank you
You MUST relock bootloader first in order to flash RUU!!!
Go to fastboot and enter: fastboot oem lock. Then try to install RUU. Nice unbricking!
sgarza said:
I wrote
after relocking I tried to run :
RUU_Flyer_TMO_DE_2.27.111.1_Radio_20.3504.30.089BU_3809.07.04.06_M_release_204120_signed.exe
some errors on installing like 140, bootloader error
so I am not sure if this is the good RUU
Click to expand...
Click to collapse
Keioboy said:
You MUST relock bootloader first in order to flash RUU!!!
Go to fastboot and enter: fastboot oem lock. Then try to install RUU. Nice unbricking!
Click to expand...
Click to collapse
Thanks for reply
of course... I relocked it but update utility gives me error 140....
somebody thinks it's because of incompatibility of flashing an older version on a newer one,
I don't know if that has something to do with kernel, radio, baseband or whatsoever....
sgarza said:
Thanks for reply
of course... I relocked it but update utility gives me error 140....
somebody thinks it's because of incompatibility of flashing an older version on a newer one,
I don't know if that has something to do with kernel, radio, baseband or whatsoever....
Click to expand...
Click to collapse
Ok, the only way I found to solve was flashing a
rom.zip retrieved from temporary files after launching the HTC update utility, (RUU.exe)
from RUU_Flyer_HC_S_HTC_TUR_3.62.468.1
I renamed the rom .zip to PG41IMG.zip,
then copied it on a goldcard, prepared before...launched bootloader and so on...
that was the only one without errors that finally worked...
now trying to flash a custom rom, I need phone functions....which rom?...
Hi guys,
Bought a Evo 3D second hand... GSM version.
Got it home, had a custom stock rom on it and had Revolutionary Recovery on it.
I flashed a MIUI rom to it and have been using that fine for a few months, now i have come to install a different rom and it installs fine but won't boot. It either stays on the bootscreen forever or just reboot cycles the phone.
Now the bootloader is unlocked but it doesn't have S-OFF.
I think i need to S-OFF to flash the roms correctly.
Here's whats on it:
Rom: MIUI v2.10.26
Baseband: 11.77.3504.00U_11.25.3504.06_M
HBOOT: 1.53.0007
Recovery: 4EXT recovery
HBOOT says:
*** UNLOCKED ***
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.007
eMMC-BOOT
May 22 2012, 01:06:07
Just want to provide as much info as possible...
It would be fantastic if you could help me
Thanks
bump!
I suggest you RUU back to stock and use this guide to get s-off
http://forum.xda-developers.com/showthread.php?t=1743466
EM|NEM said:
I suggest you RUU back to stock and use this guide to get s-off
http://forum.xda-developers.com/showthread.php?t=1743466
Click to expand...
Click to collapse
I have downloaded RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed
And i get Error 155 when flashing. I have also downloaded the .zip version and when i try and flash it from recovery it says it cant and the file is bad.
flyboyovyick said:
And i get Error 155 when flashing.
Click to expand...
Click to collapse
Lock your bootloader with the "fastboot oem lock" command and run the RUU again.
ramjet73
ramjet73 said:
Lock your bootloader with the "fastboot oem lock" command and run the RUU again.
ramjet73
Click to expand...
Click to collapse
This is what i get: http://puu.sh/2ndCW
EDIT: Now says relocked in HBOOT gonna flash RUU
Flashed the stock RUU, now i'm trying to unlock the bootloader again via HTCDev.com and when i copy the Identifier Token it says its too short. I am pretty sure i'm copying it correctly
solved... There were spaces in the box
So i am now S-OFF, i need to downgrade my HBOOT still...
How do i do that?
Right, managed to downgrade the HBOOT but still, when i flash AOKP it stays on the splashscreen forever....
http://forum.xda-developers.com/showthread.php?t=1906172
use this hboot. and wipe everything(data and cache) before flashing aokp