Hi
My experia ray is died now
I've flashed " ICS pureness " and work correctly .
then I try to flash baseband , which come with the rom .
the phone reboot then stop working !
No power
No lights ! ( green or blue )
No vibration
not recognize with the laptop
I can't boot with fastboot nor flashmode !
I can see him as a " QHSUSB_DLOAD "
==============
any help ?
any idea ?
please.
hi
u can use wotanserver it ll solve
If can't solve you have to find someone who have octopusbox or other..
wotanserver : It can't descover my phone .
octopusbox : I'm from Syria , here I can't find or bey like this tools
can I make it on my home ?!
thanks
ahmad.omr said:
wotanserver : It can't descover my phone .
octopusbox : I'm from Syria , here I can't find or bey like this tools
can I make it on my home ?!
thanks
Click to expand...
Click to collapse
And you can connect thru Flastools?
Xmasp said:
And you can connect thru Flastools?
Click to expand...
Click to collapse
It can't find my phone !
This happened to me in february with my Xperia X8. The weird thing is I totally killed my phone trying to opening the bootloader, but you say your Ray is dead 'cause you installed Pureness and flashed a baseband; I'm not an expert but I think flashing the baseband messed with the bootloader, of course, if I'm wrong please someone correct me.
I tried to revive my X8 with all methods I found around the web, with no results. The only advice I can give is trying to find a person with Medusa Box and see if he can bring your Ray back to life, but this may be quite hard.
Or... Sending to SONY support, maybe they could fix it, as you didn't touch the bootloader, but if it was already unlocked, then they wouldn't do anything for you.
send it to sony support, if you still have warranty but unlocked bootloader, then they will charge some fees, if you still have warranty and didnt unlocked bootloader, maybe they'll fix it for free, but if you dont have warranty chances are they wont fix it for you.
XrayCharles said:
send it to sony support, if you still have warranty but unlocked bootloader, then they will charge some fees, if you still have warranty and didnt unlocked bootloader, maybe they'll fix it for free, but if you dont have warranty chances are they wont fix it for you.
Click to expand...
Click to collapse
did you try and fix with seus/sus.....if it doesn't won't to work try these instructions: http://forum.xda-developers.com/showthread.php?t=1492805&highlight=unbrick
I think if u flash baseband, the phone should be back to factory reset...
I have flashed via flashtool new baseband on stock rom ics, from .72 to .77
After reboot,all of my apps have gone..just like we buy a new phone...
But i dont know in pureness (custom rom)... is that baseband made the phone to factory reset or not...
I think u should inject ur phone with JTAG.. This somekind of stuff that sony nor samsung have at the customer service...
It used to hardbricked phone
Sent from my ST18i using xda premium
ahmad.omr said:
Hi
My experia ray is died now
I've flashed " ICS pureness " and work correctly .
then I try to flash baseband , which come with the rom .
the phone reboot then stop working !
No power
No lights ! ( green or blue )
No vibration
not recognize with the laptop
I can't boot with fastboot nor flashmode !
I can see him as a " QHSUSB_DLOAD "
==============
any help ?
any idea ?
please.
Click to expand...
Click to collapse
how did you get to this mode?
This mode basically is under qualcomm usb download mode. I'm not sure but you can try to search under htc forum where got lot of powerful dev for this prob. I think you have to install like qualcomm usb driver in order for the phone to be properly detected by the computer. Then you need some kind of qualcomm program in order to use the phone with? probably qms or something? try google for "QHSUSB_DLOAD"
I had the same situation. nothing will help here. flash memory is dead. so in my case I flashed ics then stock rom and it rebooted and same symptoms . so the only way out was to buy broken xperia ray on ebay and change phone's "motherboard"
Related
Hello guys i hope that you can help me i have a huge problem my neo: it doesn't response when i press power botton, green light is flashing and lcd is black!
I had CM 7.1 before and few things didn't worked well (i loved it but i had problem with camera) so i wanted to replace it with stock ROM newest version...
I tryed few methods with fastboot, and x10 flashtool, SEUS and Wotan client...
Fastboot flashed ROM successfully (older versions) but it stucked at SE logo ...
So i tryed out x10 flashtool followed by guides etc. and when i connect my phone to pc X10 Flashtool is showing up some errors about USB drivers = USB\VID_0FCE&PID_ADDE\4&2BEA0481&0&002etc
... and i installed drivers (Gordons Gate)
So i tryed 3th solution Downloaded SEUS and again stuck at connecting mode it doesn't show my phone connected... Cant make it work
And 4th solution was Wotan client. And i found some old ROM 3.1....145 and i flashed it and VOILA IT WORKED...
BUT i'm greedy bastard and i wanted the newest version of my ROM ))) (yes shame on me) so i tryed to update it with SE PC companion... and it connected with pc and than downloaded some small file and when it pops to connect my phone again it was unable to detect it (i followed procedure carefuly).
So i tryed to update it from Phone and it downloaded all things, phone restarted and now i got problem i mentioned above "my NEO doesn't response when i press power botton, green light is flashing and lcd is black!"
So i tryed to Flash old 3.1...145 ROM with Wotan client and again same problem (green light) and after it i tryed to flash the newest version of ROM 4.0.2.A.0.42 and same problem...
Also my phone is on charger at the moment i dont know how much batery % i got and again green light is flashing when its charging!
Also im using Windows XP Pro SP3 if it matters!
And now i cant connect phone in fastboot mode - when i connect usb cable to phone while holding meny key blue led doesnt show...
So guys if you can help me somehow i would be very grateful.
And sorry for to long Thread i am just out of any ideas
I think i can fix it, i'll send you a pm with instructions
Great i hope You will be able to fix it
Is there any progress about your problem, my friend suffering exactly same situation and we couldnt find anything to solve... Pls share your experiences...
Alejandrissimo said:
I think i can fix it, i'll send you a pm with instructions
Click to expand...
Click to collapse
can u pm me too?
ergokce said:
Is there any progress about your problem, my friend suffering exactly same situation and we couldnt find anything to solve... Pls share your experiences...
Click to expand...
Click to collapse
YES my Phone is fixed and im happy... Now i will sell it and buy HTC )))
Oke so where was problem? Problem was in SEMC (its something like bootloader i guess) it was erased. Phone was at service (good thing is that im working in mobile phone store and service so it was free for me xD) and now its fully working with 3.0...145 software version!
And my servicer told me not to update to current 4.0....42 version because i have unlocked bootloader (had to unlock it to install CM 7.1) and something might go wrong! ... So tell your friend to take phone to service and to pay thats only way for now...
I have the same problem, could I please have some help as well?
if any one have this problem here is the solution
http://forum.xda-developers.com/showthread.php?t=1353623
I made a huge mistake i made factory reset to my NEO and now i have nothing on the phone and i mean nothing at all any help i rooted it but and i had no service and i made factory reset by mistake and i have nothing nothing nothing
You have no choice but to re install EVERYTHING ~ User Apps and stuff
You can restore tho, only if you have a backup
help please
I have nothing on the phone no home screens no menu no icons i have nothing i can operate on and the computer doesn't detect the phone to re-install things again or anything nothing at all i need help i any sort of manner please
i rooted my phone than i did factory reset it is supposed to show setup and nothing is showing nothing at all just plain backgroung with nothing on it
That's strange :O
What i say you should do is use Wotan server
Using that it'll flash a new firmware
How did you root ?? Via The ZerghRush CMD thingy ??
Try to connect in flashmode (hold back button while powering on) green LED should burn.
Do U have unlocked bootloader?if yes U must flash custom kernel like doom or inteks he have cwm.Next flash any rom like cyanogen or tweaked v07 .IF UHave locked bootloader flash new rom with Wotanserwer or flashtool
Sent from my MT15i using xda premium
to make it flash mode should i plug it to the computer first ?? i am sorry if that is a silly question but i am really a newbie
How do I know if i have Unlocked or locked Bootloader
Yes i rooted it with ZerghRush Toolkit od DoomsLord
Click and hold menu button n' then plug usb to pc when led light is blue then U make unlocked bootloader on U'r phone.When is green ... sorry U cannot unlock bootloader
Sent from my MT15i using xda premium
It's 100% unlocked
as he got Doomlords kernel on it
and afaik modded kernels need Unlocked Bootloaders
Emary said:
Yes i rooted it with ZerghRush Toolkit od DoomsLord
Click to expand...
Click to collapse
use flashtool for flashing your neo. use fastboot for doomlord for your kernel....
any help appriciated
This is my how my phone look like now a desert Nothing at all
PS: Bluetooth works fine i sent the screenshot from the phone and wotan client needs account and credits and i dont have any credits on their website said its free but its not please guys help i got this phone after suffering
Can u tell me steps to do and what do u mean exactly by Fastboot i cant get it
You also can use WotanClient, it's more easier.
http://www.wotanserver.com/downloads/WotanClient.exe
If this application doesn't recognize your No, download this and run it : http://goo.gl/sTh9J
But, have you a custom kernel ?
i tried it there is a problem with the account i dont have enough credits is there any way i can gain credits or can u give a vlid account name and password to use
Use FlashTool and download the firmware as a ftf file or download Sony Ericsson Update Service
How Can i do it i need some steps to follow as i know nothing in that field
and also i saw that thread and downloaded firmware MT15i_4.0.2.A.0.42_Global from
http://forum.xda-developers.com/showthread.php?t=1258723 is it useful in any way and still cant find a way to use waton if it is possible
Thank u all i got it back
Thank u Thank u Thank u every person wasted a moment to help really thank u
[Q] [Really Need Help] Xperia Neo would not start, only shows "sony ericsson" :(
Hi guys, I am new to this forum and a new smartphone user.
Last night I was updating my phone through PC companion, but the software dies half way for some unknown reason. Since then I could not turn on my phone.. It will only vibrates, shows "Sony Ericsson", and then an image of yellow triangle with an exclamation mark shows up, then it is turned off again. I tried charging, restarting my pc companion software to try to update my phone, but none of them work.
I saw some threads here and it seems that there are possible solutions, but because the terminology is quite strange to me I could not fully understand what I have to do What is a flashtool and SEUS? I tried to search them up on the net but the downloads seem to be unavailable?? I must be missing something here.
If anyone can help me with simple terminology I will really really appreciate it.. Thanks a lot!
Your phone's boot loader unlocked or not & if yes what method?(s1tool,official SE or setool2 paid) ? Here's a good tutorial about flashtool.
lilbunnyf said:
Hi guys, I am new to this forum and a new smartphone user.
Last night I was updating my phone through PC companion, but the software dies half way for some unknown reason. Since then I could not turn on my phone.. It will only vibrates, shows "Sony Ericsson", and then an image of yellow triangle with an exclamation mark shows up, then it is turned off again. I tried charging, restarting my pc companion software to try to update my phone, but none of them work.
I saw some threads here and it seems that there are possible solutions, but because the terminology is quite strange to me I could not fully understand what I have to do What is a flashtool and SEUS? I tried to search them up on the net but the downloads seem to be unavailable?? I must be missing something here.
If anyone can help me with simple terminology I will really really appreciate it.. Thanks a lot!
Click to expand...
Click to collapse
Hi,
This is my suggestion:
first download FlashTool_0.2.9.1_FOTAUnbrick
http://forum.xda-developers.com/showthread.php?t=1126358
Follow instructions (if u familiar with updating with sony ericsson pc companion, this u can do)
Simple, start FlashTool_0.2.9.1_FOTAUnbrick, click flash. Choose loader.sin on the right. Then click OK,
Turn of phone, hold in back button while connect phone with usb cable.
See its flashing, wait til its done, unplug phone,. try to boot up phone.
I am also a newbie, but this worked for me
pls give me a link to download SEUS, for xperia neo pls. pls help I am having the same problem pls help,
emailprashanthvg said:
pls give me a link to download SEUS, for xperia neo pls. pls help I am having the same problem pls help,
Click to expand...
Click to collapse
Try: http://dl-www.sonyericsson.com/cws/download/1/110/61/1323075336/Update_Service_Setup-2.11.12.5.exe
Guys dont panic if you bricked your phone go through the Xperia neo Forums and im sure you can unbrick your phone i have bricked my phone 2 times and i was able to unbrick !
http://forum.xda-developers.com/show....php?t=1126358 ...even i suggest this page because this is were i was able to unbrick my phone successfully !
Thank you guys! My phone is finally working again!
lilbunnyf said:
Thank you guys! My phone is finally working again!
Click to expand...
Click to collapse
Good! Enjoy your neo!
abhinav333 said:
Guys dont panic if you bricked your phone go through the Xperia neo Forums and im sure you can unbrick your phone i have bricked my phone 2 times and i was able to unbrick !
http://forum.xda-developers.com/show....php?t=1126358 ...even i suggest this page because this is were i was able to unbrick my phone successfully !
Click to expand...
Click to collapse
I don't think link is right mate, 404 page not found
Anyway @lilbunnyf if your phones boot loader is unlocked using s1tool method do not use seus or pc companion.As I read in forum this can brick your phone.Try flashtool.If you got a locked boot loader or patched one with setool2 then you can use pc companion(this thing saved my phone like 5-6 times now after kinda bricking it with roms kudos se for this xD)
lilbunnyf said:
Thank you guys! My phone is finally working again!
Click to expand...
Click to collapse
oh xD didn't saw this,Good
lilbunnyf said:
Thank you guys! My phone is finally working again!
Click to expand...
Click to collapse
Tell us how did you unbrick it, maybe in future someone will have the same problem as you
dioggo92 said:
Tell us how did you unbrick it, maybe in future someone will have the same problem as you
Click to expand...
Click to collapse
LOL so your are ready to brick your phone !
dioggo92 said:
Tell us how did you unbrick it, maybe in future someone will have the same problem as you
Click to expand...
Click to collapse
Most likely the post #3. That should help.
I have the same problem...
but mine already unlock using s1tool, rooted using zergexploit and using cwm...
i wanted to install se tweak so i use cwm the installation is complete after rebooting my phone is bricked... so please... im begging help me...
i've tried using flashtool to reflash to stock but i cant get my phone connected... it seems i cant go to fastboot mode...
I managed to get stuck in a boot loop today. I have a locked bootloader and SEUS did the job, so I guess that is the best solution for the problem mentioned by OP.
JOeYJAcX said:
I have the same problem...
but mine already unlock using s1tool, rooted using zergexploit and using cwm...
i wanted to install se tweak so i use cwm the installation is complete after rebooting my phone is bricked... so please... im begging help me...
i've tried using flashtool to reflash to stock but i cant get my phone connected... it seems i cant go to fastboot mode...
Click to expand...
Click to collapse
Since you unlock it via s1tool, you should still be able to use SEUS.
Anw, why fastboot mode? Have you tried to connect it in flashmode?
Hello,
my Xperia Active does not start
Flashtool doesnt work
Wotan server doesnt work
No power on
Charging doesnt work
When i connect it to my PC it show it as "qhsusb_DLOAD" sometimes "Zeus Flash Device"
Flashtool doesnt recognized it, still wainting dor connect.
Does anybody can help me???
Im student and dont have money for new phone :crying::crying:
Please help me
George
matonka007 said:
Hello,
my Xperia Active does not start
Flashtool doesnt work
Wotan server doesnt work
No power on
Charging doesnt work
When i connect it to my PC it show it as "qhsusb_DLOAD" sometimes "Zeus Flash Device"
Flashtool doesnt recognized it, still wainting dor connect.
Does anybody can help me???
Im student and dont have money for new phone :crying::crying:
Please help me
George
Click to expand...
Click to collapse
Okay so you have installed all the drivers for flashtool and PC Companion?
What have you done with your phone, on which software version have you been, is your bootloader locked/unlocked, are you on a custom rom/kernel?
Please give us more information and we can maybe help you
Hi George,
It looks like your phone has gone into a factory mode as said in this thread.
You might want to send it to warranty repair if your bootloader is still intact and your warranty period isn't over or you might want to try different key combinations to wake your phone from coma (that's what it looks like) . If you manage to boot your device using different key combinations then immediately put your phone in A/C charging. After full charge do a factory reset and repair your phone using seus (this might work but not guaranteed) . For more info google "qhsusb_dload xperia" and also read the above mentioned link carefully.
Good luck!
Press thanks if I helped you.
Sent from my ST15i using xda app-developers app
known issue?
What did you do before you get this problem?
Is this a known issue/problem with Xperia Active?
Now I'm worry, cause I just bought this phone last month
de4thscythell said:
What did you do before you get this problem?
Is this a known issue/problem with Xperia Active?
Now I'm worry, cause I just bought this phone last month
Click to expand...
Click to collapse
This issue is a rarity. It is generally a device fault or happens when you play with the device's bootloader in the way you shouldn't. I've read somewhere it means that there is no bootloader in the device and the phone is waiting to be flashed with a bootloader and that's why it's called the factory mode. ( I can't verify my sources on this ).
Press thanks if I helped.
Sent from my ST15i using xda app-developers app
gouthamthemostwanted said:
This issue is a rarity. It is generally a device fault or happens when you play with the device's bootloader in the way you shouldn't. I've read somewhere it means that there is no bootloader in the device and the phone is waiting to be flashed with a bootloader and that's why it's called the factory mode. ( I can't verify my sources on this ).
Press thanks if I helped.
Sent from my ST15i using xda app-developers app
Click to expand...
Click to collapse
yep, i agree with u, i dont have such problem since march i bought my xperia active, n its been flashed, unlock n relock bootloader so many times but its fine
Hello,
I tried to flash Lollipop from another Z2's Nandroid backup. But Only thing I got now is blinking red LED when I connect phone to charger or PC (Flashmode and fastboot dead).
All the tricks with buttons I already tried. And after that I dissasembled my Z2 to try pull out battery - nothing.
After that I found out, there is a Testpoint and when I ground it I can connect to PC as SOMC Flash Device but I don't have any SETool stuff and something like that.
I tried to use S1tool from 28.2.2015 but it still doesn't support MSM8974-AB only MSM8974.
Thanks for any advices.
martan777 said:
Hello,
I tried to flash Lollipop from another Z2's Nandroid backup. But Only thing I got now is blinking red LED when I connect phone to charger or PC (Flashmode and fastboot dead).
All the tricks with buttons I already tried. And after that I dissasembled my Z2 to try pull out battery - nothing.
After that I found out, there is a Testpoint and when I ground it I can connect to PC as SOMC Flash Device but I don't have any SETool stuff and something like that.
I tried to use S1tool from 28.2.2015 but it still doesn't support MSM8974-AB only MSM8974.
Thanks for any advices.
Click to expand...
Click to collapse
pc companion repair?
press vol + and power then connect as flsahmode or flashboot with Flashtools?
Nothing, Fastboot and Flashmode are completely dead.
martan777 said:
Nothing, Fastboot and Flashmode are completely dead.
Click to expand...
Click to collapse
Have you tried this
http://forum.xda-developers.com/showpost.php?p=53220435&postcount=4
myrums said:
Have you tried this
http://forum.xda-developers.com/showpost.php?p=53220435&postcount=4
Click to expand...
Click to collapse
Yes, phone doesn't react. Tried all buttons tricks even with rubber band on it for all night. Only flashing mode I can achieve is trough testpoint.
z2
hey there m8 : ) ihave the same issue also and believe its not working , but i think i could do some atleast if u help , any idea where is the xperia z2 test point is ? i've seen lots of threads and believe me ALOT and found nothing about the test point from my phone here is the pic btw check it out :
and my last Question is there any model of JTAG boxes that could Fix sony xperia z2 (D6502 ) atm or we should just wait more .
ah come on cant link pic :/ shame is there any pic from z2 test point guys ?
lllldante said:
hey there m8 : ) ihave the same issue also and believe its not working , but i think i could do some atleast if u help , any idea where is the xperia z2 test point is ? i've seen lots of threads and believe me ALOT and found nothing about the test point from my phone here is the pic btw check it out :
and my last Question is there any model of JTAG boxes that could Fix sony xperia z2 (D6502 ) atm or we should just wait more .
ah come on cant link pic :/ shame is there any pic from z2 test point guys ?
Click to expand...
Click to collapse
No idea about the jtag thing but I think this is the test point for the Z2, I connected it to PC and all other points give no change, but this one turns the led off when grounded by touching the metal shields with a paper clip.
If I'm wrong then OP please correct me.
Also am patiently waiting for an update to S1 Tools for our d6503/2, there's plenty of hard bricks qwith unfortunately no solution unlike other Z flagships.
hard brick z2
yep i tested it also and the only change that i could get is just that point that u mentioned , was in city searching for some one to fix my phone he said hes gonna charge me 50 dollar to fix my phone without even opening my phone with heat ( already opened it : / ) , when i asked him whats this about and how could u fix it he said it s a new way that came for z2 and i could get ure boot back up again , hopefully i will go there in 2 or 3 days to see if his right , will let u know if i fixed the phone and hopefully i could ask him about the way that his doing it : )
This is testpoint that works for me.
z2
ah ok
martan777 said:
Hello,
I tried to flash Lollipop from another Z2's Nandroid backup. But Only thing I got now is blinking red LED when I connect phone to charger or PC (Flashmode and fastboot dead).
All the tricks with buttons I already tried. And after that I dissasembled my Z2 to try pull out battery - nothing.
After that I found out, there is a Testpoint and when I ground it I can connect to PC as SOMC Flash Device but I don't have any SETool stuff and something like that.
I tried to use S1tool from 28.2.2015 but it still doesn't support MSM8974-AB only MSM8974.
Thanks for any advices.
Click to expand...
Click to collapse
I had same problem. did you find the solution?
0906 said:
I had same problem. did you find the solution?
Click to expand...
Click to collapse
No, even two services couldn't fix it. Waiting now for new S1tool
Refresh
.
Don't know about Sony repair service, just tried some unofficial services and nothing. All I got is only flashing with testpoint but for this you need some flashing box like Octopus box or SETool. Also exists alternative - S1tool which is free but now works only with Z1 and older models.
refresh
how could restoring another nandroid or carbon rom cause a hard brick?
I don't know. It was 5.0 backup from another Z2 (same model) and i had 4.4.
martan777 said:
This is testpoint that works for me.
Click to expand...
Click to collapse
hello sir .now your mobile alive or not? please tell
me ,i m also in waiting for solution.
the backup you installed had ta partition? flashing another phone's ta partition will brick your device