[Q] Hard bricked Z2 - Xperia Z2 Q&A, Help & Troubleshooting

Hello,
I tried to flash Lollipop from another Z2's Nandroid backup. But Only thing I got now is blinking red LED when I connect phone to charger or PC (Flashmode and fastboot dead).
All the tricks with buttons I already tried. And after that I dissasembled my Z2 to try pull out battery - nothing.
After that I found out, there is a Testpoint and when I ground it I can connect to PC as SOMC Flash Device but I don't have any SETool stuff and something like that.
I tried to use S1tool from 28.2.2015 but it still doesn't support MSM8974-AB only MSM8974.
Thanks for any advices.

martan777 said:
Hello,
I tried to flash Lollipop from another Z2's Nandroid backup. But Only thing I got now is blinking red LED when I connect phone to charger or PC (Flashmode and fastboot dead).
All the tricks with buttons I already tried. And after that I dissasembled my Z2 to try pull out battery - nothing.
After that I found out, there is a Testpoint and when I ground it I can connect to PC as SOMC Flash Device but I don't have any SETool stuff and something like that.
I tried to use S1tool from 28.2.2015 but it still doesn't support MSM8974-AB only MSM8974.
Thanks for any advices.
Click to expand...
Click to collapse
pc companion repair?
press vol + and power then connect as flsahmode or flashboot with Flashtools?

Nothing, Fastboot and Flashmode are completely dead.

martan777 said:
Nothing, Fastboot and Flashmode are completely dead.
Click to expand...
Click to collapse
Have you tried this
http://forum.xda-developers.com/showpost.php?p=53220435&postcount=4

myrums said:
Have you tried this
http://forum.xda-developers.com/showpost.php?p=53220435&postcount=4
Click to expand...
Click to collapse
Yes, phone doesn't react. Tried all buttons tricks even with rubber band on it for all night. Only flashing mode I can achieve is trough testpoint.

z2
hey there m8 : ) ihave the same issue also and believe its not working , but i think i could do some atleast if u help , any idea where is the xperia z2 test point is ? i've seen lots of threads and believe me ALOT and found nothing about the test point from my phone here is the pic btw check it out :
and my last Question is there any model of JTAG boxes that could Fix sony xperia z2 (D6502 ) atm or we should just wait more .
ah come on cant link pic :/ shame is there any pic from z2 test point guys ?

lllldante said:
hey there m8 : ) ihave the same issue also and believe its not working , but i think i could do some atleast if u help , any idea where is the xperia z2 test point is ? i've seen lots of threads and believe me ALOT and found nothing about the test point from my phone here is the pic btw check it out :
and my last Question is there any model of JTAG boxes that could Fix sony xperia z2 (D6502 ) atm or we should just wait more .
ah come on cant link pic :/ shame is there any pic from z2 test point guys ?
Click to expand...
Click to collapse
No idea about the jtag thing but I think this is the test point for the Z2, I connected it to PC and all other points give no change, but this one turns the led off when grounded by touching the metal shields with a paper clip.
If I'm wrong then OP please correct me.
Also am patiently waiting for an update to S1 Tools for our d6503/2, there's plenty of hard bricks qwith unfortunately no solution unlike other Z flagships.

hard brick z2
yep i tested it also and the only change that i could get is just that point that u mentioned , was in city searching for some one to fix my phone he said hes gonna charge me 50 dollar to fix my phone without even opening my phone with heat ( already opened it : / ) , when i asked him whats this about and how could u fix it he said it s a new way that came for z2 and i could get ure boot back up again , hopefully i will go there in 2 or 3 days to see if his right , will let u know if i fixed the phone and hopefully i could ask him about the way that his doing it : )

This is testpoint that works for me.

z2
ah ok

martan777 said:
Hello,
I tried to flash Lollipop from another Z2's Nandroid backup. But Only thing I got now is blinking red LED when I connect phone to charger or PC (Flashmode and fastboot dead).
All the tricks with buttons I already tried. And after that I dissasembled my Z2 to try pull out battery - nothing.
After that I found out, there is a Testpoint and when I ground it I can connect to PC as SOMC Flash Device but I don't have any SETool stuff and something like that.
I tried to use S1tool from 28.2.2015 but it still doesn't support MSM8974-AB only MSM8974.
Thanks for any advices.
Click to expand...
Click to collapse
I had same problem. did you find the solution?

0906 said:
I had same problem. did you find the solution?
Click to expand...
Click to collapse
No, even two services couldn't fix it. Waiting now for new S1tool

Refresh

.

Don't know about Sony repair service, just tried some unofficial services and nothing. All I got is only flashing with testpoint but for this you need some flashing box like Octopus box or SETool. Also exists alternative - S1tool which is free but now works only with Z1 and older models.

refresh

how could restoring another nandroid or carbon rom cause a hard brick?

I don't know. It was 5.0 backup from another Z2 (same model) and i had 4.4.

martan777 said:
This is testpoint that works for me.
Click to expand...
Click to collapse
hello sir .now your mobile alive or not? please tell
me ,i m also in waiting for solution.

the backup you installed had ta partition? flashing another phone's ta partition will brick your device

Related

[Q] NEO- huge problem!

Hello guys i hope that you can help me i have a huge problem my neo: it doesn't response when i press power botton, green light is flashing and lcd is black!
I had CM 7.1 before and few things didn't worked well (i loved it but i had problem with camera) so i wanted to replace it with stock ROM newest version...
I tryed few methods with fastboot, and x10 flashtool, SEUS and Wotan client...
Fastboot flashed ROM successfully (older versions) but it stucked at SE logo ...
So i tryed out x10 flashtool followed by guides etc. and when i connect my phone to pc X10 Flashtool is showing up some errors about USB drivers = USB\VID_0FCE&PID_ADDE\4&2BEA0481&0&002etc
... and i installed drivers (Gordons Gate)
So i tryed 3th solution Downloaded SEUS and again stuck at connecting mode it doesn't show my phone connected... Cant make it work
And 4th solution was Wotan client. And i found some old ROM 3.1....145 and i flashed it and VOILA IT WORKED...
BUT i'm greedy bastard and i wanted the newest version of my ROM ))) (yes shame on me) so i tryed to update it with SE PC companion... and it connected with pc and than downloaded some small file and when it pops to connect my phone again it was unable to detect it (i followed procedure carefuly).
So i tryed to update it from Phone and it downloaded all things, phone restarted and now i got problem i mentioned above "my NEO doesn't response when i press power botton, green light is flashing and lcd is black!"
So i tryed to Flash old 3.1...145 ROM with Wotan client and again same problem (green light) and after it i tryed to flash the newest version of ROM 4.0.2.A.0.42 and same problem...
Also my phone is on charger at the moment i dont know how much batery % i got and again green light is flashing when its charging!
Also im using Windows XP Pro SP3 if it matters!
And now i cant connect phone in fastboot mode - when i connect usb cable to phone while holding meny key blue led doesnt show...
So guys if you can help me somehow i would be very grateful.
And sorry for to long Thread i am just out of any ideas
I think i can fix it, i'll send you a pm with instructions
Great i hope You will be able to fix it
Is there any progress about your problem, my friend suffering exactly same situation and we couldnt find anything to solve... Pls share your experiences...
Alejandrissimo said:
I think i can fix it, i'll send you a pm with instructions
Click to expand...
Click to collapse
can u pm me too?
ergokce said:
Is there any progress about your problem, my friend suffering exactly same situation and we couldnt find anything to solve... Pls share your experiences...
Click to expand...
Click to collapse
YES my Phone is fixed and im happy... Now i will sell it and buy HTC )))
Oke so where was problem? Problem was in SEMC (its something like bootloader i guess) it was erased. Phone was at service (good thing is that im working in mobile phone store and service so it was free for me xD) and now its fully working with 3.0...145 software version!
And my servicer told me not to update to current 4.0....42 version because i have unlocked bootloader (had to unlock it to install CM 7.1) and something might go wrong! ... So tell your friend to take phone to service and to pay thats only way for now...
I have the same problem, could I please have some help as well?
if any one have this problem here is the solution
http://forum.xda-developers.com/showthread.php?t=1353623

experia ray is died !

Hi
My experia ray is died now
I've flashed " ICS pureness " and work correctly .
then I try to flash baseband , which come with the rom .
the phone reboot then stop working !
No power
No lights ! ( green or blue )
No vibration
not recognize with the laptop
I can't boot with fastboot nor flashmode !
I can see him as a " QHSUSB_DLOAD "
==============
any help ?
any idea ?
please.
hi
u can use wotanserver it ll solve
If can't solve you have to find someone who have octopusbox or other..
wotanserver : It can't descover my phone .
octopusbox : I'm from Syria , here I can't find or bey like this tools
can I make it on my home ?!
thanks
ahmad.omr said:
wotanserver : It can't descover my phone .
octopusbox : I'm from Syria , here I can't find or bey like this tools
can I make it on my home ?!
thanks
Click to expand...
Click to collapse
And you can connect thru Flastools?
Xmasp said:
And you can connect thru Flastools?
Click to expand...
Click to collapse
It can't find my phone !
This happened to me in february with my Xperia X8. The weird thing is I totally killed my phone trying to opening the bootloader, but you say your Ray is dead 'cause you installed Pureness and flashed a baseband; I'm not an expert but I think flashing the baseband messed with the bootloader, of course, if I'm wrong please someone correct me.
I tried to revive my X8 with all methods I found around the web, with no results. The only advice I can give is trying to find a person with Medusa Box and see if he can bring your Ray back to life, but this may be quite hard.
Or... Sending to SONY support, maybe they could fix it, as you didn't touch the bootloader, but if it was already unlocked, then they wouldn't do anything for you.
send it to sony support, if you still have warranty but unlocked bootloader, then they will charge some fees, if you still have warranty and didnt unlocked bootloader, maybe they'll fix it for free, but if you dont have warranty chances are they wont fix it for you.
XrayCharles said:
send it to sony support, if you still have warranty but unlocked bootloader, then they will charge some fees, if you still have warranty and didnt unlocked bootloader, maybe they'll fix it for free, but if you dont have warranty chances are they wont fix it for you.
Click to expand...
Click to collapse
did you try and fix with seus/sus.....if it doesn't won't to work try these instructions: http://forum.xda-developers.com/showthread.php?t=1492805&highlight=unbrick
I think if u flash baseband, the phone should be back to factory reset...
I have flashed via flashtool new baseband on stock rom ics, from .72 to .77
After reboot,all of my apps have gone..just like we buy a new phone...
But i dont know in pureness (custom rom)... is that baseband made the phone to factory reset or not...
I think u should inject ur phone with JTAG.. This somekind of stuff that sony nor samsung have at the customer service...
It used to hardbricked phone
Sent from my ST18i using xda premium
ahmad.omr said:
Hi
My experia ray is died now
I've flashed " ICS pureness " and work correctly .
then I try to flash baseband , which come with the rom .
the phone reboot then stop working !
No power
No lights ! ( green or blue )
No vibration
not recognize with the laptop
I can't boot with fastboot nor flashmode !
I can see him as a " QHSUSB_DLOAD "
==============
any help ?
any idea ?
please.
Click to expand...
Click to collapse
how did you get to this mode?
This mode basically is under qualcomm usb download mode. I'm not sure but you can try to search under htc forum where got lot of powerful dev for this prob. I think you have to install like qualcomm usb driver in order for the phone to be properly detected by the computer. Then you need some kind of qualcomm program in order to use the phone with? probably qms or something? try google for "QHSUSB_DLOAD"
I had the same situation. nothing will help here. flash memory is dead. so in my case I flashed ics then stock rom and it rebooted and same symptoms . so the only way out was to buy broken xperia ray on ebay and change phone's "motherboard"

[Q] WT19i Bricked - please help!

Hi,
I've get my girlfriend brother's phone to check - so it is bricked. I do not know how he did this. But phone is not turning on, no led light or sth. But it is known on PC as QHSUSB_DLOADER - I do not have drivers for this mode.
I've tested all methods to get it to flash mode for FlashTool, but it is not working.
Any sugestions?
emm
First, can you explain better how the phone bricked??
have you tried flashing http://forum.xda-developers.com/attachment.php?attachmentid=953586&d=1332104415
extract tft and put it into flashtool/frimwares , then flash it..
if it does not work, then your in troubles.. you may need a medusa box to solve it.
Nachospeicys said:
First, can you explain better how the phone bricked??
have you tried flashing http://forum.xda-developers.com/attachment.php?attachmentid=953586&d=1332104415
extract tft and put it into flashtool/frimwares , then flash it..
if it does not work, then your in troubles.. you may need a medusa box to solve it.
Click to expand...
Click to collapse
I do not know how it was bricked, but he said that, the power on button does not work, after phone died, before it his PC doen not recognise phone, my on my PC phone is known as as mentioned before - I do not have drivers for this strange named device
AFAIK, your phone is permanently bricked. It's loader is corrupted which has caused it to go to factory service mode. You have to take it to Sony service center or have an expert JTAG the phone to recover it. BTW, How did he do this?
Have you tried installing the drivers from flashtool folder and connect it in flashmode?
I think it's hardbricked, too, and you have to take it to sony
prime_225 said:
AFAIK, your phone is permanently bricked. It's loader is corrupted which has caused it to go to factory service mode. You have to take it to Sony service center or have an expert JTAG the phone to recover it. BTW, How did he do this?
Click to expand...
Click to collapse
I do not know how he did this ) I've installed proper drivers for WT19i on FlashTool - no way to flash anything.
Expert JTAG? it is some kind of service box or it is special thing that only Sony service have got?
wiewiorcwaniak said:
Hi,
I've get my girlfriend brother's phone to check - so it is bricked. I do not know how he did this. But phone is not turning on, no led light or sth. But it is known on PC as QHSUSB_DLOADER - I do not have drivers for this mode.
I've tested all methods to get it to flash mode for FlashTool, but it is not working.
Any sugestions?
Click to expand...
Click to collapse
Have you tried to connect the phone to pc while holding the volume up button.........a blue led must glow up
If the phone connects .......that means you can flash a kernel by fastboot method
http://forum.xda-developers.com/showthread.php?t=1322827
JTag cable is now only solution for your mobile.
To look for jtag cable Google it and look for a dealer in your region and call, them they will give you right solution.
Don't worry bro your phone will revive with it as I have revived my phone twice
Sent from my LiveWithWalkman using xda app-developers app
Nachospeicys said:
First, can you explain better how the phone bricked??
have you tried flashing http://forum.xda-developers.com/attachment.php?attachmentid=953586&d=1332104415
extract tft and put it into flashtool/frimwares , then flash it..
if it does not work, then your in troubles.. you may need a medusa box to solve it.
Click to expand...
Click to collapse
you are a expert it work
Strange, It is the 1st time to see a bricked xperia 2011 phone!!
Sent from my Xperia Mini using xda app-developers app

[Q] Xperia sola blocked on Sony screen

Hi guys, i don't know how to solve a problem with my Sola. I read the recover soft-brick guide for xperia models but i can't solve it. I think i bricked.
When i try to turn on it's on Sony screen and there's nothing to do. I can use on flash mode and flash the kernel but the result is the same when i turn on. The led works like green in flash mode, or red when i finish the flash and the device is still connected. I have a locked bootloader, and all this happened when i wanted to restore a backup, i probably made a mistake: do a full wipe after that. I think that's is still in warranty, isnt' it? What can i do? There are some tips on the tutorial but i'm afraid to kill the battery or make other mistakes. Please help me guys.
And sorry for my bad english =(
brimbi said:
Hi guys, i don't know how to solve a problem with my Sola. I read the recover soft-brick guide for xperia models but i can't solve it. I think i bricked.
When i try to turn on it's on Sony screen and there's nothing to do. I can use on flash mode and flash the kernel but the result is the same when i turn on. The led works like green in flash mode, or red when i finish the flash and the device is still connected. I have a locked bootloader, and all this happened when i wanted to restore a backup, i probably made a mistake: do a full wipe after that. I think that's is still in warranty, isnt' it? What can i do? There are some tips on the tutorial but i'm afraid to kill the battery or make other mistakes. Please help me guys.
And sorry for my bad english =(
Click to expand...
Click to collapse
Have you tried to flash a stock firmware with flashtool?
elia222 said:
Have you tried to flash a stock firmware with flashtool?
Click to expand...
Click to collapse
Yes and flash is ok but when i turn on it's still on sony screen...i waited about 5 minutes. I tried with 6.1.1.B.1.54 and with 6.1.1.B.1.1.0 with same result. I know i have to wait after flash a stock firmware but i see it's too much time. Maybe because when i want to switch off i have to use hard reset (i mean with all 3 button). I don't know..thanks to reply in any case
brimbi said:
Yes and flash is ok but when i turn on it's still on sony screen...i waited about 5 minutes. I tried with 6.1.1.B.1.54 and with 6.1.1.B.1.1.0 with same result. I know i have to wait after flash a stock firmware but i see it's too much time. Maybe because when i want to switch off i have to use hard reset (i mean with all 3 button). I don't know..thanks to reply in any case
Click to expand...
Click to collapse
In any case, if you don't solve the issue by yourself, your phone is still in warranty (just don't say to the reparation service that you played with flashtool )
elia222 said:
In any case, if you don't solve the issue by yourself, your phone is still in warranty (just don't say to the reparation service that you played with flashtool )
Click to expand...
Click to collapse
Yep i hope. What can i do now? When i charge it turn on by itself and always on sony logo (but led is off)
Also when i flash and it's still on usb port the led is red but the device is off, i'm looking for a solution on RECOVER SOFT-brick thread but i don't know in which part am i.
brimbi said:
Yep i hope. What can i do now? When i charge it turn on by itself and always on sony logo (but led is off)
Also when i flash and it's still on usb port the led is red but the device is off, i'm looking for a solution on RECOVER SOFT-brick thread but i don't know in which part am i.
Click to expand...
Click to collapse
You tried with the Sony PC Companion/Update Service? It uses flashmode.. When I bricked my U i had relocked my bootloader and flashed via PC Companion... Worked for me :fingers-crossed:
Press thanks if I helped:good:
Try to start from the beginning, and follow the instructions carefully.
dotafan said:
You tried with the Sony PC Companion/Update Service? It uses flashmode.. When I bricked my U i had relocked my bootloader and flashed via PC Companion... Worked for me :fingers-crossed:
Press thanks if I helped:good:
Click to expand...
Click to collapse
But i have a locked bootloader, will i invalidate warranty? i'm going to try with pc companion =)
No it won't!!
If you were on a custom rom flash kernel/ftf via flashtool nd then use PC Companion:thumbup:
Sent from my ST25i using xda app-developers app
It works!!!!!!!!
dotafan said:
No it won't!!
If you were on a custom rom flash kernel/ftf via flashtool nd then use PC Companion:thumbup:
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
It works! My sola works now! Thank you guys! Thank you very much!
brimbi said:
It works! My sola works now! Thank you guys! Thank you very much!
Click to expand...
Click to collapse
Glad I could help :good:

Cant access to flashmode or fastboot For Sony Xperia C5 Ultra Duel

hello
i have issues in my phone ( Xperia C5 Ultra Duel )
i downloaded marshmallow to my phone and after i downloaded it i get many issues es
first problems in sim network many times i disconnect from network
second cant charge my phone and now phone is turn off i try use many charges & cables and not charging only red lamp turn in .
finally i try many times to log in flashmode or Fastboot but failed ( using flash tool prog. )
please help me and need solve to this problem
Thanks
AdrianBej said:
Alright mate, have you tried getting into recovery by pressing the Volume Down (-) button while plugging the phone into your computer? The little LED light in the upper left corner should light up indicating it is on flashmode. If not, I suspect it might be a hardbrick.
What programme did you use to get Marshmallow, Emma or Flashtool? If you used Flashtool you can not use the lastest version of it because it bricks the device. Every flashing must be done with 0.19.xx versions.
Click to expand...
Click to collapse
thx for replay
first yes i did that already , and nothing happen just little LED light be RED only
second i get marshmallow from ( update software ) in phone
Setting >> About Phone >> Update Software and the size of this update is 900M.b
i did not use any program to get marshmallow only by phone
Magicor said:
thx for replay
first yes i did that already , and nothing happen just little LED light be RED only
second i get marshmallow from ( update software ) in phone
Setting >> About Phone >> Update Software and the size of this update is 900M.b
i did not use any program to get marshmallow only by phone
Click to expand...
Click to collapse
Have u tried factory reset? Do factory reset and check if its still having issues then using flashtool flash MM firmware..it might help..
sauaditi said:
Have u tried factory reset? Do factory reset and check if its still having issues then using flashtool flash MM firmware..it might help..
Click to expand...
Click to collapse
i do it many time and stiill have problems
AdrianBej said:
Hmm could be a hardbrick, but I can not see how an OTA update could hardbrick a phone unless it is modified
Is the bootloader unlocked? Do you have root? Is Xperia Theft Protection activated?
Plug the phone into a wall and let it charge overnight, then do the thing I told you to do before and come back.
Click to expand...
Click to collapse
i did nt do root for my phone and i did not do any thing with bootloader

Categories

Resources