Hi I'm trying to install cm10 iv downloaded the zip for my ray and I'm trying to flash it in cwm and it keeps saying error (status7) what am i doing wrong this is my first time flashing a rom to my ray as iv only just unlocked my bootloader today please some one help me.
gavster26 said:
Hi I'm trying to install cm10 iv downloaded the zip for my ray and I'm trying to flash it in cwm and it keeps saying error (status7) what am i doing wrong this is my first time flashing a rom to my ray as iv only just unlocked my bootloader today please some one help me.
Click to expand...
Click to collapse
There is a Q&A thread, please post your question there, or in the cm10 thread.
That aside I googled it anf found this:
"If you are trying to flash a new ROM in CWM recovery and you get a failure due to a (Status: 7) error, the reason is because you are either trying to flash the wrong ROM (ie: GSM Version of the ROM) or MOST LIKELY you have installed the GSM CWM Recovery on your CDMA phone.
CWM will check to make sure that in the update.zip will be named correctly to either toro or the GSM version, if the other version is there, it will flag it and not flash.
Hope I was able to help!"
Maybe is your ray ST18a and not ST18i? Or you downloaded a wrong rom?
Wechy77 said:
There is a Q&A thread, please post your question there, or in the cm10 thread.
That aside I googled it anf found this:
"If you are trying to flash a new ROM in CWM recovery and you get a failure due to a (Status: 7) error, the reason is because you are either trying to flash the wrong ROM (ie: GSM Version of the ROM) or MOST LIKELY you have installed the GSM CWM Recovery on your CDMA phone.
CWM will check to make sure that in the update.zip will be named correctly to either toro or the GSM version, if the other version is there, it will flag it and not flash.
Hope I was able to help!"
Maybe is your ray ST18a and not ST18i? Or you downloaded a wrong rom?
Click to expand...
Click to collapse
my ray is st18i deffanantly i downloaded urushi thats the wright one. and my cwm is nAas off se xtream tweeker
gavster26 said:
my ray is st18i deffanantly i downloaded urushi thats the wright one. and my cwm is nAas off se xtream tweeker
Click to expand...
Click to collapse
I don't use CM10. Please aska a question in cm10 thread. There can more people help you.
I have another idea: in cm roms is boot.img in zip. Did you flashed this or sirkay's JB kernel before you flash a rom in cwm?
gavster26 said:
Hi I'm trying to install cm10 iv downloaded the zip for my ray and I'm trying to flash it in cwm and it keeps saying error (status7) what am i doing wrong this is my first time flashing a rom to my ray as iv only just unlocked my bootloader today please some one help me.
Click to expand...
Click to collapse
This is what I do when I get a status 7 error. It works every time
1. Flash stock ftf file using flashtool
2. Boot once
3. Flash CM10 kernel using fastboot or flashtool.
4. Do full wipe
5. Install ROM from zip.
Sent from my Xperia Ray using xda app-developers app
Wechy77 said:
I don't use CM10. Please aska a question in cm10 thread. There can more people help you.
I have another idea: in cm roms is boot.img in zip. Did you flashed this or sirkay's JB kernel before you flash a rom in cwm?
Click to expand...
Click to collapse
yeas boot image is in file. im new here im from the x8 fourms and everything is so much more complex lol.
all soted now peeps i just flashed stock kernel with doomlords cwm 6 + root and it installed straght away thanks for your help
Related
Hello : All
My Xperia Neo is 4.0.2A.62 and already root and unlock boot loader.Yesterday i saw Xperia Neo ICS 4.03 Beta V1.2 [4.1.C.0.7] and i updated step by step by in that thread.
At first flash boot with MT15i_Neo_ICS_Kernel_V1.This step with i completed.And then, i boot with clockworkmod recovery and install from sd card and install Xperia Neo ICS 4.03 Beta V1.zip. When i installed Xperia Neo ICS 4.03 Beta V1.zip, no error with completed and finished but when i reboot changed from Sonyericsson to Sony and circle booting.
What i wrong with Xperia Neo ICS 4.03 Beta V1.2 [4.1.C.0.7]?? what i need to do that?? Please Explain me
Best Regards
ppaphyo.
The same problem for me. I open a thread but i have no good answer. I asure you I tried with another custom rom and it does the same result, no flash phone. Another user tell me to try with another ROM and kernel, but i think it doesn't change much. I'll tell you when I flash it.
Anyone can help us? Can't we flash any custom Rom?
emaxxim said:
Anyone can help us? Can't we flash any custom Rom?
Click to expand...
Click to collapse
Guys....pleas if you make question or new thread...make it clear
Ask what you want and we help you....because hard is read this question "help, I'm installed xxxxx.xxxx.xxxx now I'm updated xxxxx.xxx.xxx, then I'm rooted 4 times up to xxx.xxx.school, then installed xxx.xxx.xxx , and then I used this tutorial xxx.xxxx.xxxx and then I did that xxxxxxx....xxxx and that xxxxx.xxxc."
Make it clear what you want!!
And don't take me like negative person I just want help us, but its hard to undestant those questions.
Sent from my MT15i using Tapatalk
What going wrong on the flashing with custom rom, we have root, bootloader unlocked, the flash of the kernel is smooth so the flash of the rom (CWM don't report any error), but something going wrong, because after i reboot the phone after i flash the rom the NEO is stucked with loading Sony boot logo for very long time (I left my phone in this status for almost 30 min, and nothing happened). So Anyone can help us? Or is just our phone?
emaxxim said:
What going wrong on the flashing with custom rom, we have root, bootloader unlocked, the flash of the kernel is smooth so the flash of the rom (CWM don't report any error), but something going wrong, because after i reboot the phone after i flash the rom the NEO is stucked with loading Sony boot logo for very long time (I left my phone in this status for almost 30 min, and nothing happened). So Anyone can help us? Or is just our phone?
Click to expand...
Click to collapse
Kernel.
Sent from my MT15i using Tapatalk
the kernel included in the KA05 Ice Cream release ( i follow step to step the instructions in that thread) and the kernel MT15i_Neo_ICS_Kernel_V1 which is write in the thread for the flash of AOSP 4.0.3 ICS BETA FINAL.
In both occasion I follow step by step the instruction in the thread, so what's going wrong?
emaxxim said:
the kernel included in the KA05 Ice Cream release ( i follow step to step the instructions in that thread) and the kernel MT15i_Neo_ICS_Kernel_V1 which is write in the thread for the flash of AOSP 4.0.3 ICS BETA FINAL.
In both occasion I follow step by step the instruction in the thread, so what's going wrong?
Click to expand...
Click to collapse
OK.
1st. Any roms starting max 5 minutes.!!!
If dont...then is problem in "kernel" or rom itself.
Something is wrong in updater script or build.prop
Or maybe something is wrong in my recovery? I use CWM, i install it with following the instructions in this thread
HTML:
http://forum.xda-developers.com/showthread.php?t=1364509
in this forum. And if it's wrong what recovery I have to install?
emaxxim said:
Or maybe something is wrong in my recovery? I use CWM, i install it with following the instructions in this thread
HTML:
http://forum.xda-developers.com/showthread.php?t=1364509
in this forum. And if it's wrong what recovery I have to install?
Click to expand...
Click to collapse
http://forum.xda-developers.com/sho...teks Clean OC ICS Beta from 4.1.C.0.6 Sources
Fastboot flash boot boot.img this kernel leave the ics rom on wipe its data /cashe / advanced >dalvik wipe if no boot flash rom again
Let us know what happens
If no good flash aosp smaller rom
http://forum.xda-developers.com/sho....3 ICS BETA FINAL | Fast and Clean | Released
Sent from my MT15i using Tapatalk
WIPE the stuff(system,data,cache,dalvik cache, whatever its written in ROM's first post) before flashing new ROM in zip.
In this case, most likely you didn't wipe/format system partition.
I follow the tips of kormatoes and integrated with the instrucions od madfish and everything is going fine, but there were some problems with that kernel, you kormatoes suggest me, so I tried to opt for the MT15i kernel, and its worked too.
Now I'm trying to install the KA05 Ice Cream Sony ROM, they say its the best custom rom based on ICS for Sony Xperia NEo. If something going wrong can you be at my side?
emaxxim said:
I follow the tips of kormatoes and integrated with the instrucions od madfish and everything is going fine, but there were some problems with that kernel, you kormatoes suggest me, so I tried to opt for the MT15i kernel, and its worked too.
Now I'm trying to install the KA05 Ice Cream Sony ROM, they say its the best custom rom based on ICS for Sony Xperia NEo. If something going wrong can you be at my side?
Click to expand...
Click to collapse
I'm off to work but yes I'll help after if you can wait till 11 pm gmt
Sent from my MT15i using Tapatalk
I just want to thanks all of you who are follow my hard path for this first flash.
Now i've installed KA05 Ice Cream Sony Rom, this is pretty good. i installed the kerne OC, i think its for overcloccking right? How tools can i use to overclock it?
Is this kernel good or I need something different?
emaxxim said:
How tools can i use to overclock it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=505419
Hi all, thanks and sorry if I am too noob. I am looking for solution for 2 hours and I cant find, maybe anyone can help me
I have Sola MT27i and I was trying to update to ICS and root my Xperia Sola for hours. I updated with Sony Companion and then I found the thread for root with Flashtool mode (flash to 6.1.1.B.1.10 with Flashtool, root using Bin4ry's method, then flash to 6.1.1.B.1.54), then I instaled CWM and I was trying now install a rom. It seems easy, and I did it last summer in my Geeksphone, but after various errors installing roms copied in externalSD as "installation aborted. Status: 7" I did the step 4 of this tutorial (enter in mounts and format system)and my Sola now only show SONY!!
http://forum.xda-developers.com/showthread.php?t=1960590
"IF COMING FROM SOME OTHER ROM, make factory wipe then go into mounts/storage and format system (not needed if updating AOKP)"
I have tried all I find and I cant restore. I cant enter in CWM, I am flashing with MT27i_relock_bootloader.ftf and Flashtool and phone only show SONY after flash...
Please help
Ty for all
Sorry my bad english
Flash stock ics ftf
Sent from my Ultimate Sola
Ty, I will try
What version plz, .54 or .10?
I am downloading now:
http://forum.xda-developers.com/showthread.php?t=2029529&highlight=ftf
http://forum.xda-developers.com/showthread.php?t=1914264
Thanks friend
Download. 54
Then flash kernel of. 10
Root via binary method
Flash kernel of. 54
Lucdim said:
Ty, I will try
What version plz, .54 or .10?
I am downloading now:
http://forum.xda-developers.com/showthread.php?t=2029529&highlight=ftf
http://forum.xda-developers.com/showthread.php?t=1914264
Thanks friend
Click to expand...
Click to collapse
Both are no problem
Sent from my Ultimate Sola
Thanks all, but I think that is the same I am trying with ftf's of this thread:
http://forum.xda-developers.com/showthread.php?t=2029756
But when I flash with Flashtool it seems is all right in Flashtool, but my phone still not run, only shows SONY
I will try with the ftf that are inside the downloads in those threads http://forum.xda-developers.com/showthread.php?t=2029529&highlight=ftf and http://forum.xda-developers.com/showthread.php?t=1914264 but maybe are the same...
I am desperate
Ty again
Ey, mates, I did! Ty for all again, y restore with Flashboot and MT27_6.1.1.B.1.54_Global.ftf and all my phone was restored.
I have phone again
Thanks!
Lucdim said:
Thanks all, but I think that is the same I am trying with ftf's of this thread:
http://forum.xda-developers.com/showthread.php?t=2029756
But when I flash with Flashtool it seems is all right in Flashtool, but my phone still not run, only shows SONY
I will try with the ftf that are inside the downloads in those threads http://forum.xda-developers.com/showthread.php?t=2029529&highlight=ftf and http://forum.xda-developers.com/showthread.php?t=1914264 but maybe are the same...
I am desperate
Ty again
Click to expand...
Click to collapse
Dude ! The ftf's in the first link are only the kernel. You just installed a CM9 ROM over a stock kernel, which would explain why it had bootloop ( in your case stuck at Sony ).
Did you flash the CWM in the ROM ( the boot.img in the zip ) or one of the others on the forum? Because those are built on Stock kernel, and this uses CM9 kernel, causing bootloops ( This is just me trying to zero in on the issue )
Solution:
Since that 1st thread had only kernel, the files were ~10Mb. The actual ftf is much larger, around 300 Mb or so, as it contains all files.
Flash one of the other 2 links' ftf's via flashtool and you should be fine.
Lucdim said:
Ey, mates, I did! Ty for all again, y restore with Flashboot and MT27_6.1.1.B.1.54_Global.ftf and all my phone was restored.
I have phone again
Thanks!
Click to expand...
Click to collapse
Congrats
Sent from my Ultimate Sola
So i know that there are a lot of posts on XDA itself about this issue but i couldn't find a single one that i saw useful for me!
I recently had re-locked my bootloader and came back on stock ICS with root!
Earlier i had flashed almost all CM ROMs including the newest CM 10.1.
Today i unlocked the bootloader and tried to flash FXP CM10 and got this error! Tried with boot.img included with the zip, as well as Lupus v7. Both gave me same errors!
Please help me guys!
Sincerely,
Ishan
Read my FAQ, click on my signature.
mauam said:
Read my FAQ, click on my signature.
Click to expand...
Click to collapse
Didn't help me
I downloaded the smultron file from here http://forum.xda-developers.com/showthread.php?p=34277958
Flashed it and the tried the ROM zip
But same issue :crying:
I advise you not re-lock & unlock you bootloader many times(maybe cause you have that problem), once unlocked let it stay unlocked. BTW try to flash a stock kernel & rom & then again a cm or cm based kernel & rom. Good luck.
ishanbhatnagr96 said:
Didn't help me
I downloaded the smultron file from here http://forum.xda-developers.com/showthread.php?p=34277958
Flashed it and the tried the ROM zip
But same issue :crying:
Click to expand...
Click to collapse
Well i guess your method worked on CM10.1
Thanks for helping! Will hit the thanks button tomorrow cause i exceeded the limit
EDIT: I flashed only 2 ROMs so i can say that, i get the Status 7 problem only with CM10 FXP but not with CM10.1 Unofficial! So help with FXP please?
mauam said:
I advise you not re-lock & unlock you bootloader many times(maybe cause you have that problem), once unlocked let it stay unlocked. BTW try to flash a stock kernel & rom & then again a cm or cm based kernel & rom. Good luck.
Click to expand...
Click to collapse
Did that 3 times! Also this is the second time i unlocked my BL. I guess that's not the problem as i just flashed CM10.1 and it's working without a problem!
extract boot file of your rom and flash it with fastboot
Just open the Updater Script inside your ROM zip and then delete the first three lines something with getprop blablabla , always working for me
Sent from my Xperia Mini using Tapatalk 2
Hello All,
can some one point me to .587 boot.img to download for xperia mini pro?
I need this because, i am trying to flash Xtream Bean ROM V 3.0 and this need this boot image and i dont have this. v2.0 flashed successfully though.
http://forum.xda-developers.com/showthread.php?t=1920187
this link has for SK15i. i tried searching the other threads with no luck.
I am new to this flashing so sorry if i asked in wrong thread or something.
Thanks in advance
iamkiu said:
Hello All,
can some one point me to .587 boot.img to download for xperia mini pro?
I need this because, i am trying to flash Xtream Bean ROM V 3.0 and this need this boot image and i dont have this. v2.0 flashed successfully though.
http://forum.xda-developers.com/showthread.php?t=1920187
this link has for SK15i. i tried searching the other threads with no luck.
I am new to this flashing so sorry if i asked in wrong thread or something.
Thanks in advance
Click to expand...
Click to collapse
the link you posted has .587 firmware for mini pro.... download it....
you have to flash it first by using flash mode and then you will find boot.img in the zip file of Xtream Bean ROM V 3.0....
extract boot.img from zip and flash it in fastboot mode.... now go to CWM recovery and follow the instructions
iamkiu said:
Hello All,
can some one point me to .587 boot.img to download for xperia mini pro?
I need this because, i am trying to flash Xtream Bean ROM V 3.0 and this need this boot image and i dont have this. v2.0 flashed successfully though.
Click to expand...
Click to collapse
I guess it's not really necessary to flash the .587 kernel first... just go ahead flashing the boot.img from inside the zip and boot in cwm recovery and flash the rom
If you really want the kernel, take it from here
thanks for ur reply
mihahn said:
I guess it's not really necessary to flash the .587 kernel first... just go ahead flashing the boot.img from inside the zip and boot in cwm recovery and flash the rom
If you really want the kernel, take it from here
Click to expand...
Click to collapse
but from installation from http://forum.xda-developers.com/showthread.php?t=2350427
Download Xtream Bean Rom V3.0 and the Fix.zip
Copy them to your SD Card
Flash the .587 Kernel First !
Click to expand...
Click to collapse
says to flast this kernal first.
I tried with out doing it but i landed into some bugs for which flashing this kernal is must?
Please suggest if I am wrong
Thanks a lot
iamkiu said:
says to flast this kernal first.
I tried with out doing it but i landed into some bugs for which flashing this kernal is must?
Please suggest if I am wrong
Thanks a lot
Click to expand...
Click to collapse
Normally there should be no problem just because you didn't flash the .587 kernel first, but you can try flashing the stock .587 kernel I posted earlier and then the boot.img you take from the rom.zip
Did you wipe before installing v3? Sometimes there are problems because you didn't wipe, but I don't know about the rom...
mihahn said:
Normally there should be no problem just because you didn't flash the .587 kernel first, but you can try flashing the stock .587 kernel I posted earlier and then the boot.img you take from the rom.zip
Did you wipe before installing v3? Sometimes there are problems because you didn't wipe, but I don't know about the rom...
Click to expand...
Click to collapse
Thanks a lot for ur kernal. it worked fine aftet flasing the ftf.
and btw, i wiped cache and dalvik too
Regards,
iamkiu
A few months ago I install a ROM called ROM-V4.0 Xperia Z in a ST15i of my girlfriend but she wanted KitKat, so I downloaded 2 ROM (Carbon, VanirAOSP) but none worked, for some reason I do not know why recovery tells me the phone model is not correct.
I tried to install from a clean ROM .587 (tft, root, xparts, cwm) but still does not work.
message: "This package is for ST15i, ST15a, smultron devices; this is a anzu"
I want to know if someone else has happened, or if anyone knows how to solve this problem
I share the message that throws the recovery
If anyone can help me I would be very grateful
alanhella said:
A few months ago I install a ROM called ROM-V4.0 Xperia Z in a ST15i of my girlfriend but she wanted KitKat, so I downloaded 2 ROM (Carbon, VanirAOSP) but none worked, for some reason I do not know why recovery tells me the phone model is not correct.
I tried to install from a clean ROM .587 (tft, root, xparts, cwm) but still does not work.
message: "This package is for ST15i, ST15a, smultron devices; this is a anzu"
I want to know if someone else has happened, or if anyone knows how to solve this problem
I share the message that throws the recovery
If anyone can help me I would be very grateful
Click to expand...
Click to collapse
Did You Flash Kernel Given In The Zip??
Men_in_black007 said:
Did You Flash Kernel Given In The Zip??
Click to expand...
Click to collapse
thanks for your reply
no, I just went into CWM via xparts (in stock), in the ROM threads do not mention any kernel, I think I will read in more detail.
or should I read another thread where explain the kernel should I use?
alanhella said:
thanks for your reply
no, I just went into CWM via xparts (in stock), in the ROM threads do not mention any kernel, I think I will read in more detail.
or should I read another thread where explain the kernel should I use?
Click to expand...
Click to collapse
Flash kernel inside rom zip with fastboot and then the rom... http://forum.xda-developers.com/showthread.php?t=1879982
Sent from my MT11i using Tapatalk 2