We now finally got iCS so this thread is left to die - but still works 100%
Guide for stock rooting any GingerBread Sola MT27i
(If you want a stock ,untweaked rom/kernel- this is how to do it)
In short;
1,flashtool ->STOCK rom.<-
2,fastboot ->MODKERNEL<-
Start phone update superuser.
3,flashtool STOCKKERNEL.<-
(see? We are flashing back stock here)
=stock kernel/rom +root.
Ok,you need:
a fastboot enabled device & unlocked bootloader. -> must read tutorial by lollyhost100
a working flashtool+drivers
a MODKERNEL : here: munjeni <confirmed/working
a stock GB rom:
XPERIA SOLA 6.0.B.3.184 Central Europe
or here: XPERIA SOLA 6.0.B.3.184 Asian
ok,
1.
copy MT27i_6.0.B.3.184_Central Europe.ftf (or Asian) to C:\Flashtool\firmwares
start flashtool in flashmode (hit the lightning)
select - MT27i_6.0.B.3.184_Central Europe.ftf - untick verification - press "ok" (see flashtool_step1.jpg below)
insert usb with volume DOWN
flash starts, takes 1-2 minutes
wait for "restarting device " -> if it just sits there and wait - just close flashtool and remove usb - dont worry its all done.
power off phone
2.rooting:
copy (and rename if you want syntax simple) kernel.elf to c:\fastboot (you did prepare a fastboot folder yes?)
insert usb with volumeUP
cmd to fastboot folder:
run cmd:
fastboot flash boot kernel.elf
(takes 3 sec)
- remove usbcable
- start phone as normal
- enable your google etc and internet settings.
- enable - Settings>>Applications>Development>tick all 3 options and "ok"
- and enable- Settings>>Applications>unknown sources <- tick this and "ok"
.-update superuser binary <- make sure you have working internet/wifi here-
(open app drawer -<super user >-
when all updating is done-power off
3.start flashtool in flashmode (again) (volumeDOWN)
select - MT27i_6.0.B.3.184_Central Europe.ftf (again)
wipe nothing - leave only kernel unticked -> see the pic!
flash only kernel+loader
see "flashtool_final step.jpg"
______
done -root with 100% stock kernel...method worx on any stock GB rom mt27
_thnx:Androxyde,Doomlord,munjani,lollyhost100 XDA
Very gud bro finally people wl stop asking the same questions again and again :highfive:
anyone can confirm that with this root method using rom B184 can we use wifi hotspot?
P/S: do we have any solution for backing up IMEI and related things. It'll be safer to do this before play around with rom...
Many Thanks and Best Regards.
kenblat said:
anyone can confirm that with this root method using rom B184 can we use wifi hotspot?
Many Thanks and Best Regards.
Click to expand...
Click to collapse
Yes! Its Stock kernel & stock rom! But with root
sent from mt27i
Doomlord rooted the kernel back in the days of the .564 firmware. Are you sure its a good idea to combine the new 184 firmware with the older pre-rooted kernel from .564?
And we don't need an unlocked Bootloader for that?
Gesendet von meinem MT27i mit Tapatalk 2
Locutus266 said:
Doomlord rooted the kernel back in the days of the .564 firmware. Are you sure its a good idea to combine the new 184 firmware with the older pre-rooted kernel from .564?
Click to expand...
Click to collapse
Yes ofcourse. Read again.
1,flashtool ->STOCK rom.<-
2,fastboot ->MODKERNEL<-
Start phone update superuser.
3,flashtool STOCKKERNEL.<-
(see? We are flashing back stock here)
=stock kernel/rom +root.
sent from mt27i
gazhead said:
Yes ofcourse. Read again.
1,flashtool ->STOCK rom.<-
2,fastboot ->MODKERNEL<-
Start phone update superuser.
3,flashtool STOCKKERNEL.<-
(see? We are flashing back stock here)
=stock kernel/rom +root.
sent from mt27i
Click to expand...
Click to collapse
Thanks for your explanation, gazhead. So if I understand correctly, the second step of flashing the pre-rooted kernel is only there for installing/updating superuser and su binaries and stuff?
I am currently on doomlords pre-rooted .564-kernel with .571 ROM. Is there a way I can preserve all my user data prior to flashing according to your howto?
"Thanks for your explanation, gazhead. So if I understand correctly, the second step of flashing the pre-rooted kernel is only there for installing/updating superuser and su binaries and stuff?"
Yes
"I am currently on doomlords pre-rooted .564-kernel with .571 ROM. Is there a way I can preserve all my user data prior to flashing according to your howto?
Lol im so used to make backups so i forgot to mention it.
Just use pccompanion an make full backup
This method will wipe data/cache.
We aways recommend wiping this prior to new rom - its "standard procedure" with roms all over XDA.
This wipe will ensure a fresh clean install.
sent from mt27i
Thanks again for your answer. However I've got a few more questions
Will PC Companion only backup user data or also system files ?
Will PC Companion work although I already unlocked the boot loader the sony official way?
Once I restore my backup after the procedure, won't PC Companion overwrite any system files with older ones?
Thanks
Locutus266 said:
Thanks again for your answer. However I've got a few more questions
Will PC Companion only backup user data or also system files ?
Will PC Companion work although I already unlocked the boot loader the sony official way?
Once I restore my backup after the procedure, won't PC Companion overwrite any system files with older ones?
Thanks
Click to expand...
Click to collapse
heh.. there are many alternatives to backup stuff - use search in XDA
for a simple tutorial check youtube or google please. -< this thread is about rooting stock GB :angel:
I have done some research and unpacked the userdata.sin from the .184 ftf file. Tool I used is sin2raw and then mounted it under a Linux box as ext4 file. Contents are
total 216
drwxrwx--x 2 administrator administrator 4096 Jul 18 18:28 app
-rw-r--r-- 1 root root 3360 Jul 18 18:28 CredentialManagerData
-rw-r--r-- 1 root root 204480 Jul 18 18:28 libroparsertest.so
drwxrwx--x 3 administrator administrator 4096 Jul 31 09:31 lua
drwxrwx--t 2 administrator 9998 4096 Jul 31 09:31 misc
[email protected]:~/testuser# du .
4 ./app
1252 ./lua/bin
1260 ./lua
12 ./misc
1484 .
[email protected]:~/testuser#
there's nothing really in there. So you can safely flash the 184 ftf without ticking "wipe user data". Of course you will still have to re-root the device afterwards using gazheads technique
it'll be the best if we have stock 184 + root + recovery ... how can we install recovery in a clean stock rom with only root?!?
I have a problem now. Superuser app says "Gaining root access" fails. the su binary is there and is updated to ver 3.1.1
I had root access once I did the procedure, it seems that I got this error since I have updated SU binary.
Already tried reflashing pre-rooted doomlord kernel, without any luck.
Any ideas?
Locutus266 said:
I have a problem now. Superuser app says "Gaining root access" fails. the su binary is there and is updated to ver 3.1.1
I had root access once I did the procedure, it seems that I got this error since I have updated SU binary.
Already tried reflashing pre-rooted doomlord kernel, without any luck.
Any ideas?
Click to expand...
Click to collapse
yep - superuser app -> settings -> ota survival ->reboot ->try again
gazhead said:
yep - superuser app -> settings -> ota survival ->reboot ->try again
Click to expand...
Click to collapse
Thanks I somehow got it fixed now. I checked OTA survival before all that happened. Could that have been the problem?
What is OTA survival anyway?
kenblat said:
it'll be the best if we have stock 184 + root + recovery ... how can we install recovery in a clean stock rom with only root?!?
Click to expand...
Click to collapse
heh? stock kernel has no cwm. u need to use a modkernel like doomlord only. this thread is for STOCK kernel
with locked bootloader
hi,
Please tell me can we root our sola by this procedure with locked bootloader.
rupeshmourya said:
hi,
Please tell me can we root our sola by this procedure with locked bootloader.
Click to expand...
Click to collapse
nope you cant root your device if bootloader is locked !!!
soulhackereborn said:
nope you cant root your device if bootloader is unlocked !!!
Click to expand...
Click to collapse
woot the other way around
Related
Here is the tutorial for Installing stock 4.0.2.A.0.62 ROM plus root and CWM. I am not responsible or anyone mentioned below for bricking your phone in case, tested on my Xperia ray with unlocked bootloader using S1 tool.
Requirements
Unlocked Bootloader (preferred) although there is a work around for locked bootloader
4.0.2.A.0.62 FTF files
Flashtool
recoveryRay.img by and Rootxperia.zip b1n4ry (for rooting)
CWM
Installation:
How to Install stock 4.0.2.A.0.62 ROM:
Download this stock 4.0.2.A.0.62 ROM. Thank you Aire for providing the link.
After download you will have a zip file. Extract it.
Download flashtool here and extract it.
Create FTF file using flashtool from the 4.0.2.A.0.62 ROM zip you extracted earlier. Now if you don't know how to create FTF files, there's a good tutorial here.
If you successfully created FTF file, you should see a file with extension “.ftf” in the “firmwares” folder inside “FlashTool” folder
Run the executable “X10FlashTool.exe” located in the FlashTool folder
Now click “Flash” button and select flashboot. Now select the firmware from the popup menu. Make sure “Wipe user data” box is checked and then click “OK”.
The application will ask you to put your Ray in flashboot mode, to do this turn off the phone, hold the volume down button while while connecting the USB cable to your computer.
Follow the on screen instruction and your device will reboot. Notice that the reboot process will take longer at first.
How to install Root
Please note that this is only applied to devices with unlocked bootloader. Alternately, you can just install a custom kernel and root using zergrush method but if you want to try the .62 kernel from this stock rom then do this.
Download rootxperia.zip here and place it in your sd card
Enter device in fastboot mode. Turn off phone, hold volume up while you connect the USB cable to computer
Download the recoverRAY.img provided below, you will get a zip file, extract it.
Open folder inside Flashtool where fastboot.exe exists (/FlashTool/x10flasher_lib)
Place the recoveryRAy.img inside the folder
Open command line in this folder
Test if it recognize your device, to do this type fastboot devices, if there is a result here proceed.
Now here's the tricky part, to enter a temporary recovery type fastboot boot recoveryRAY.img
*Notice that we didn't use fastboot flash boot ****.img here because as bin4ry said this recovery is designed to work just as recovery, if you flash it to your device it will NOT boot system anymore! This is just a temporary recovery for you so be careful not to flash it.
Now wait and your phone will reboot, you will see the FREE XPERIA splash screen and your device will now enter temp CWM recovery
On your phone choose install custom zip, locate the rootxperia.zip you added earlier in your SD card and flash it.
Reboot, your device is now rooted.
*to root your device with locked bootloader, they say you can install previous stock kernel and root using zergrush method.
How to install CWM
Download this then extract
Make sure you enabled USB debugging, and also you need to set Screen timeout to 10 minutes so you don't miss the superuser promt
Run install-cwm1.cmd from the folder
Follow screen on screen instruction, reboot.
idareyoutoclickthis said:
Here is the tutorial for Installing stock 4.0.2.A.0.62 ROM plus root and CWM. I am not responsible or anyone mentioned below for bricking your phone in case, tested on my Xperia ray with unlocked bootloader using S1 tool.
Requirements
Unlocked Bootloader (preferred) although there is a work around for locked bootloader
4.0.2.A.0.62 FTF files
Flashtool
recoveryRay.img by and Rootxperia.zip b1n4ry (for rooting)
CWM
Installation:
How to Install stock 4.0.2.A.0.62 ROM:
Download this stock 4.0.2.A.0.62 ROM. Thank you Aire for providing the link.
After download you will have a zip file. Extract it.
Download flashtool here and extract it.
Create FTF file using flashtool from the 4.0.2.A.0.62 ROM zip you extracted earlier. Now if you don't know how to create FTF files, there's a good tutorial here.
If you successfully created FTF file, you should see a file with extension “.ftf” in the “firmwares” folder inside “FlashTool” folder
Run the executable “X10FlashTool.exe” located in the FlashTool folder
Now click “Flash” button and select flashboot. Now select the firmware from the popup menu. Make sure “Wipe user data” box is checked and then click “OK”.
The application will ask you to put your Ray in flashboot mode, to do this turn off the phone, hold the volume down button while while connecting the USB cable to your computer.
Follow the on screen instruction and your device will reboot. Notice that the reboot process will take longer at first.
How to install Root
Please note that this is only applied to devices with unlocked bootloader. Alternately, you can just install a custom kernel and root using zergrush method but if you want to try the .62 kernel from this stock rom then do this.
Download rootxperia.zip here and place it in your sd card
Enter device in fastboot mode. Turn off phone, hold volume up while you connect the USB cable to computer
Download the recoverRAY.img provided below, you will get a zip file, extract it.
Open folder inside Flashtool where fastboot.exe exists (/FlashTool/x10flasher_lib)
Place the recoveryRAy.img inside the folder
Open command line in this folder
Test if it recognize your device, to do this type flashboot devices, if there is a result here proceed.
Now here's the tricky part, to enter a temporary recovery type fastboot boot recoveryRAY.img
*Notice that we didn't use fastboot flash boot ****.img here because as bin4ry said this recovery is designed to work just as recovery, if you flash it to your device it will NOT boot system anymore! This is just a temporary recovery for you so be careful not to flash it.
Now wait and your phone will reboot, you will see the FREE XPERIA splash screen and your device will not enter temp CWM recovery
Choose install custom zip, locate the rootxperia.zip you added earlier in your SD card and flash it.
Reboot, your device is now rooted.
*to root your device with locked bootloader, they say you can install previous stock kernel and root using zergrush method.
How to install CWM
Download this then extract
Make sure you enabled USB debugging, and also you need to set Screen timeout to 10 minutes so you don't miss the superuser promt
Run install-cwm1.cmd from the folder
Follow screen on screen instruction, reboot.
Click to expand...
Click to collapse
Thanks for this.. but.. i wonder what happened if i update from SEUS.. :-/ and also, is the kernel from aire already support Overclocking?
hansip87 said:
Thanks for this.. but.. i wonder what happened if i update from SEUS.. :-/ and also, is the kernel from aire already support Overclocking?
Click to expand...
Click to collapse
Aire said, his current kernel supports .62 but they are currently working for repack based on this new firmware.
I haven't tried installing any custom firmware at the moment, I want to test this stock firmware for changes and improvement especially the baseband and battery consumption.
Sent from my ST18i using xda premium
Hm ok, btw, can you post the original link for rootxperia.zip?
EDIT: sorry you already did that thanks!
UPDATE: I'm trying to do SEUS update now though. Hope this thing won't brick..
UPDATE 2: SEUS update won't brick our phone if it uses the Testpoint method O what a happy day it is.. Let's see if i can flash aire kernel back.
is that a global version or what ? some people said, that version has some bugs..
can we root this version with the new DoomLord v4 Root ?
from the Arc forum, i found that they can root their device with .62 firmware just by using flashtool.. can we do that so ?
thx
hansip87 said:
Hm ok, btw, can you post the original link for rootxperia.zip?
UPDATE: I'm trying to do SEUS update now though. Hope this thing won't brick..
UPDATE 2: SEUS update won't brick our phone if it uses the Testpoint method O what a happy day it is.. Let's see if i can flash aire kernel back.
Click to expand...
Click to collapse
Wow that is good news. Update is still not available in my region.
adarwis said:
is that a global version or what ? some people said, that version has some bugs..
can we root this version with the new DoomLord v4 Root ?
from the Arc forum, i found that they can root their device with .62 firmware just by using flashtool.. can we do that so ?
thx
Click to expand...
Click to collapse
The firmware is provided by Aire, however if you encounter ftf generic firmware, it will be nice if you post it here.
As to bugs, I'm using this firmware for a day now and I noticed improvement in battery and speed, no bugs so far. I haven't tried the doomlord v4 root, but rooting via recovery is easy.
Sent from my ST18i using xda premium
idareyoutoclickthis said:
Wow that is good news. Update is still not available in my region.
The firmware is provided by Aire, however if you encounter ftf generic firmware, it will be nice if you post it here.
As to bugs, I'm using this firmware for a day now and I noticed improvement in battery and speed, no bugs so far. I haven't tried the doomlord v4 root, but rooting via recovery is easy.
Sent from my ST18i using xda premium
Click to expand...
Click to collapse
Yep it is I have already flashed back aire's kernel and it is flawless no more test point required. Yay! Thanks for all the devs.
Xperia blog says the firmware is targeted for users in Middle East North Africa region.
Users else where may see little if any noticeable change
sent from my gorgeus Xperia Ray
Does this not work if we previously updated the phone to 4.0.2.A.0.62 using SEUS?
Coz i got the following error when i ran the "fastboot boot recoveryRAY.img" command..
FAILED (remote: The Device must be rooted first)
San.subs said:
Does this not work if we previously updated the phone to 4.0.2.A.0.62 using SEUS?
Coz i got the following error when i ran the "fastboot boot recoveryRAY.img" command..
FAILED (remote: The Device must be rooted first)
Click to expand...
Click to collapse
O that.. That means you need to unlock the bootloader (at least with Test Point method). Never thought that won't work before.
most download link from MultiUpload cannot download the firmware 4.0.2.A.0.62 ROM, any alternative link?
Thanks.
San.subs said:
Does this not work if we previously updated the phone to 4.0.2.A.0.62 using SEUS?
Coz i got the following error when i ran the "fastboot boot recoveryRAY.img" command..
FAILED (remote: The Device must be rooted first)
Click to expand...
Click to collapse
If your bootloader is still locked you can not root your device using that method. The only work around is to install previous kernel and root using zergrush method.
hansip87 said:
O that.. That means you need to unlock the bootloader (at least with Test Point method). Never thought that won't work before.
Click to expand...
Click to collapse
idareyoutoclickthis said:
If your bootloader is still locked you can not root your device using that method. The only work around is to install previous kernel and root using zergrush method.
Click to expand...
Click to collapse
Thank you "idareyoutoclickthis" and "hansip87" for your replies.
In fact I had rooted my Ray earlier 4.0.2.A.0.42ver using the zergrush method using DooMLoRD_v4_Root Which I lost when I upgraded to 4.0.2.A.0.62ver. Now DooMLoRD_v4_Root won't work with 4.0.2.A.0.62ver update.
Now what about the bootloader thing? Sorry for being so dumb. Can you please elaborate a bit? I've got only got to the point wherein i checked the status using the service menu (*#*#.....#*#). It only says Rooting Status: Bootloader unlocking allowed: Yes.
What do I have to do now? Please help.
San.subs said:
Thank you "idareyoutoclickthis" and "hansip87" for your replies.
In fact I had rooted my Ray earlier 4.0.2.A.0.42ver using the zergrush method using DooMLoRD_v4_Root Which I lost when I upgraded to 4.0.2.A.0.62ver. Now DooMLoRD_v4_Root won't work with 4.0.2.A.0.62ver update.
Now what about the bootloader thing? Sorry for being so dumb. Can you please elaborate a bit? I've got only got to the point wherein i checked the status using the service menu (*#*#.....#*#). It only says Rooting Status: Bootloader unlocking allowed: Yes.
What do I have to do now? Please help.
Click to expand...
Click to collapse
Indeed .62 is the latest built which include alot of improvements specially on batter issue.
If you don't want custom rom and kernel and is contented with the stock ROM and kernel then you don't need to unlock your bootloader.
to root your device, you need to flash stock 4.0.2.A.0.42 kernel only, you can do this with locked bootloader and root using zergrush method.
idareyoutoclickthis said:
Indeed .62 is the latest built which include alot of improvements specially on batter issue.
If you don't want custom rom and kernel and is contented with the stock ROM and kernel then you don't need to unlock your bootloader.
to root your device, you need to flash stock 4.0.2.A.0.42 kernel only, you can do this with locked bootloader and root using zergrush method.
Click to expand...
Click to collapse
Do I lose root if I restore the .62 kernel after rooting?
slimfady said:
Do I lose root if I restore the .62 kernel after rooting?
Click to expand...
Click to collapse
I'm afraid yes but i never tried it though cause my bootloader is unlocked.
hi, what is the work around for locked bootloader , i am using 4.0.2.A.0.62, i dont want to use any custome rom or mod i want only root intalled on this. i use ARC -S
Regards,
M.Baradharajan
---------- Post added at 12:35 PM ---------- Previous post was at 12:31 PM ----------
hi, where can i get the original stock 4.0.2.A.0.42 ROM, not modified one to reflash from 4.0.2.A.0.62 rom.
Regards,
M.Baradharajan
baradharajan said:
hi, what is the work around for locked bootloader , i am using 4.0.2.A.0.62, i dont want to use any custome rom or mod i want only root intalled on this. i use ARC -S
Regards,
M.Baradharajan
---------- Post added at 12:35 PM ---------- Previous post was at 12:31 PM ----------
hi, where can i get the original stock 4.0.2.A.0.42 ROM, not modified one to reflash from 4.0.2.A.0.62 rom.
Regards,
M.Baradharajan
Click to expand...
Click to collapse
Ask in the Arc forum please.
even i got the same error remote: device must be rooted first... my bootloaders are unlocked.. wht shud i do now
*Notice that we didn't use fastboot flash boot ****.img here because as bin4ry said this recovery is designed to work just as recovery, if you flash it to your device it will NOT boot system anymore! This is just a temporary recovery for you so be careful not to flash it.
I dont read careful this note and now my phone's brick. I cannot access flashmode or fastbootmode anymore. Now my phone only log in temRECOVERY
Can anyone help me. From vietnam
i tried all the method to root my mobile and my mobile is already rooted once and installed the cmw but all of that were deleted and every time i try to root it i find an error
used the root kit didnt do nothing
the flashtool always say
ERROR - Cleaning rootit files
Mounting /system R/W
FTError
my mobile has unlocked bootloader
what should i do !?
Hello, moved this to Q&A forum. Will have a better chance of getting an answer here. Thanks.
what are you. on?
Hotboot or flash any custom kernel, go to CWM recovery and flash superuser.zip.
Why messing with root toolkits when you have unlocked bl. Make your life easier.
pls, can iI ask . question. what . is the benefit of super stock? can iuse it on suave kernel on pureness rom. thanks.
Use kernel for recommended kernel by developer...maybe you can try super stock kernel yourself.
Root With
aliiahmed.20 said:
i tried all the method to root my mobile and my mobile is already rooted once and installed the cmw but all of that were deleted and every time i try to root it i find an error
used the root kit didnt do nothing
the flashtool always say
ERROR - Cleaning rootit files
Mounting /system R/W
FTError
my mobile has unlocked bootloader
what should i do !?
Click to expand...
Click to collapse
Steps
1. Run/Install CWM recovery by fastboot (Need ADB driver, RecoveryNeo.img and Fastboot (and also no noob mind))
http://forum.xda-developers.com/showthread.php?t=1183465 [say thanks to Bin4ry]
2.Download RootXperia.zip & place it in your SDCard
3. switch off your device & power it on & when you see the sony ericsson logo start pressing the volume download button repeatedly untill you see recovery options
3. select the install zip from sd card option and select the RootXperia.zip
4. after flashing the zip is completed reboot device & voila rooted !!!
Vineet
Neo V MT11i
unlock bootloder (DMR available]
PARANOID ANDROID JB|[v1.992]
I want to root the xperia U but the boot loader is locked.
I have tried the Flashtool method but it gives the error
11/024/2011 00:24:38 - ERROR - Cleaning rootit files
Mounting /system R/W
FTError
And the Root Many is also not working
http://forum.xda-developers.com/showthread.php?t=1886460
waqasleo17 said:
I want to root the xperia U but the boot loader is locked.
I have tried the Flashtool method but it gives the error
11/024/2011 00:24:38 - ERROR - Cleaning rootit files
Mounting /system R/W
FTError
And the Root Many is also not working
Click to expand...
Click to collapse
Can you give a few more details like which f/w ? Try Root by Bin4ry if its ICS. But if your f/w is 6.1.1.B.54 or 6.1.1.C.10, flash B.10 kernel,root it then flash the original kernel back [Use Flashtool and stock FTFs ]
Min3r said:
Can you give a few more details like which f/w ? Try Root by Bin4ry if its ICS. But if your f/w is 6.1.1.B.54 or 6.1.1.C.10, flash B.10 kernel,root it then flash the original kernel back [Use Flashtool and stock FTFs ]
Click to expand...
Click to collapse
Yes the firmware is 6.1.1.B.54.
I have flashed it last night due to the softdead of the cell.
& one more thing I screenshot in this version by pressing the power and volume down button
Sent from my ST25i using xda app-developers app
Ok what you gotta do now is flash the B.10 kernel.. Open flashtool and tick all the 'Exclude options' of B.1.10 except the "Exclude Kernel" and untick all the wipe options above it, then Flash it on your phone. Should take less than 1 minute.
Then, boot up the phone and root using Bin4ry Root method with Backup & Restore. After that, reboot the phone, then follow exact same propcedure I mentioned with B.1.54 ftf to flash the original kernel back
Now, you are succesfully rooted lemme know if you have mroe doubts
Min3r said:
Ok what you gotta do now is flash the B.10 kernel.. Open flashtool and tick all the 'Exclude options' of B.1.10 except the "Exclude Kernel" and untick all the wipe options above it, then Flash it on your phone. Should take less than 1 minute.
Then, boot up the phone and root using Bin4ry Root method with Backup & Restore. After that, reboot the phone, then follow exact same propcedure I mentioned with B.1.54 ftf to flash the original kernel back
Now, you are succesfully rooted lemme know if you have mroe doubts
Click to expand...
Click to collapse
Hi I have flashed this Rom the French Version http://forum.xda-developers.com/showthread.php?t=2028139
Now I flashed with the b.1.10 kernel presented in the given link.
The Tried the Root method but it didn't worked.
Also tried the ROOT MANY METHOD. Also it didn't worked.
(Other people also complaining about this that no Root Method is working )
Now I flashed backed the B.1.54 kernel..
All in vain
Any other help can you provide me, Sir?
So the OFFICIAL 6.0.1 is already out and this is not the BETA version. It's for consumer release.
So how do you get to this eh?
NOTES: Flashtool can be used for both LB/UB. You won't lose DRM keys or unlock bootloader if you flash via flashtool.
1. Install Flashtool (get it here: http://www.flashtool.net/downloads.php).
2. There is a XperiFirm option there which would allow you to download official FTF files.
3. Navigate your way to Z3 Compact and grab the D5803 version US Variant (since this is configured for GLOBAL-LTE but i might still need to test bands). Or just grab anything you want there as long as it's version: 23.5.A.0.570
3. Flash using flashmode (hit the lightning icon there).
Now there's this "WIPE" Box, you have 2 options!
- Check User data and App logs and hit flash -- this will factory reset phone so you better have a backup!
- Leave them UNCHECKED if you want to retain your apps from your previous STOCK ROM. (might automatically uninstall incompatible apps in the process).
Once it asks for your device to be connected. Do as it says (power down, then hold the vol. down button as you plug the phone in).
-- this should start flashing.
4. After the process you may now boot the phone and there you have it!
-- Things below require unlocked BL --
If you want root, you can use fastboot and TWRP 3.X (I've tested the TWRP version 3.0.2 on the 6.0.1 beta before)
send this command on fastboot:
Code:
fastboot flash recovery <your twrp img here>
and hit enter. It must return 'OKAY'.
Unplug phone then boot into recovery and flash your SuperSU.zip
https://download.chainfire.eu/924/SuperSU/BETA-SuperSU-v2.68-20160228150503.zip
MINE!
Give a link to proper TWRP image please
tRippinthehead said:
Give a link to proper TWRP image please
Click to expand...
Click to collapse
If you have a locked BL, then root and install DualRecovery. There is an excellent thread here on XDA and you'll be on TWRP in no time. It also makes sure you'll have the drivers and flash tool and everything that you'll need for this already configured and ready to go.
If you have an unlocked BL, just go find TWRP and flash through fastboot.
Thanks OP!
P.S. I'm guessing for those with locked BLs, we can use PRFCreator and that FTF from Xperifirm to create a flashable, pre-rooted MM ROM...anyone tried? My Z3c is currently bricked (hopefully fixable) so I can't test at the moment.
Another DEV published a root method, both for the LB and UB:
http://forum.xda-developers.com/z3/general/wip-sony-android-6-0-mm-t3337357/page1
Keep in mind that that method was used for the BETA version of the rom, but yeah it's more likely that it would work with the consumer release. I'll update the OP once I relock my BL and successfully gain root with it.
The UB method there has the same effect as mine
I could not get root with the method, i would get boot img failure on flashing superSU in twrp with unlocked BL but to solve the issue i just flashed the advanced kernel for 6.0.1 and superSU flashed fine..not sure if anyone else is having this problem but this method did not work for me.
Do I keep root with locked bootloader with this method ?
Title of this topic is confusing, it seems that you need BL unlocked to get root.
hayatesan said:
Do I keep root with locked bootloader with this method ?
Title of this topic is confusing, it seems that you need BL unlocked to get root.
Click to expand...
Click to collapse
No you will lose root if you flash ftf on locked BL, you will need to root again using whichever method you used previously. If you flash an ftf file on ANY bootloader locked or unlocked it resets your phone to the contents of the ftf file.
Fictional Reality said:
No you will lose root if you flash ftf on locked BL, you will need to root again using whichever method you used previously. If you flash an ftf file on ANY bootloader locked or unlocked it resets your phone to the contents of the ftf file.
Click to expand...
Click to collapse
And which is the method to root this version with BL??
hv6478 said:
P.S. I'm guessing for those with locked BLs, we can use PRFCreator and that FTF from Xperifirm to create a flashable, pre-rooted MM ROM...anyone tried? My Z3c is currently bricked (hopefully fixable) so I can't test at the moment.
Click to expand...
Click to collapse
I'm giving it a try so I'll let you know.
EDIT: Admittedly I haven't got a clue how to use prfcreator but I tried and whilst it flashed there was no root or recovery.
2nd EDIT: XDR doesn't work on MM yet. I'll give TWRP a try.
TWRP 3.0.2 for Z3C https://dl.twrp.me/z3c/twrp-3.0.2-0-z3c.img.html
Buleste said:
I'm giving it a try so I'll let you know.
EDIT: Admittedly I haven't got a clue how to use prfcreator but I tried and whilst it flashed there was no root or recovery.
2nd EDIT: XDR doesn't work on MM yet. I'll give TWRP a try.
TWRP 3.0.2 for Z3C https://dl.twrp.me/z3c/twrp-3.0.2-0-z3c.img.html
Click to expand...
Click to collapse
Nice that sounds promising, at least it worked with the .zip that you created!
Which version of SuperSU are you using?
Thanks,
hv
hv6478 said:
Nice that sounds promising, at least it worked with the .zip that you created!
Which version of SuperSU are you using?
Thanks,
hv
Click to expand...
Click to collapse
I'm using BETA-SuperSU-v2.71-20160331103524.zip
However I was looking at the PRFCreator thread and it looks like if you add Recroot v2 as the SuperSU it should work. Not sure if it will give a recovery though.
EDIT: Okay. Didn't install the SuperSU binary properly but Kingroot could install the root though. Tried to remove it and replace with SuperSU and got a bootloop. However I have a cunning plan.
Xperia Z3 Compact - UB
I could not get TWRP recovery with the fastboot method.
I tried to install several "recoverys" but none are installed.
Help me please.
Buleste said:
I'm using BETA-SuperSU-v2.71-20160331103524.zip
However I was looking at the PRFCreator thread and it looks like if you add Recroot v2 as the SuperSU it should work. Not sure if it will give a recovery though.
EDIT: Okay. Didn't install the SuperSU binary properly but Kingroot could install the root though. Tried to remove it and replace with SuperSU and got a bootloop. However I have a cunning plan.
Click to expand...
Click to collapse
I love the sound of progress!
rvnlvrz said:
So the OFFICIAL 6.0.1 is already out and this is not the BETA version. It's for consumer release.
So how do you get to this eh?
NOTES: Flashtool can be used for both LB/UB. You won't lose DRM keys or unlock bootloader if you flash via flashtool.
1. Install Flashtool (get it here: http://www.flashtool.net/downloads.php).
2. There is a XperiFirm option there which would allow you to download official FTF files.
3. Navigate your way to Z3 Compact and grab the D5803 version US Variant (since this is configured for GLOBAL-LTE but i might still need to test bands). Or just grab anything you want there as long as it's version: 23.5.A.0.570
3. Flash using flashmode (hit the lightning icon there).
Now there's this "WIPE" Box, you have 2 options!
- Check User data and App logs and hit flash -- this will factory reset phone so you better have a backup!
- Leave them UNCHECKED if you want to retain your apps from your previous STOCK ROM. (might automatically uninstall incompatible apps in the process).
Once it asks for your device to be connected. Do as it says (power down, then hold the vol. down button as you plug the phone in).
-- this should start flashing.
4. After the process you may now boot the phone and there you have it!
-- Things below require unlocked BL --
If you want root, you can use fastboot and TWRP 3.X (I've tested the TWRP version 3.0.2 on the 6.0.1 beta before)
send this command on fastboot:
Code:
fastboot flash recovery <your twrp img here>
and hit enter. It must return 'OKAY'.
Unplug phone then boot into recovery and flash your SuperSU.zip
https://download.chainfire.eu/924/SuperSU/BETA-SuperSU-v2.68-20160228150503.zip
Click to expand...
Click to collapse
It doesn't work, I have trying out for a while, but fastboot doesn't flash anything
hv6478 said:
I love the sound of progress!
Click to expand...
Click to collapse
We have progress of sorts.
With prf creator add superSU and create the prerooted ROM.
In TWRP Wipe everything but SDcard and OTG
Install pre rooted ROM
Then Install RICDefieat.zip, byeselinux_flashable.zip, and BusyBox-v1.24.1-Stericson.zip
Power off the phone.
Open Flashtool
Load ftf of .570 and check the Exclude System box and flash the phone
Install TWRP using Z3C_MM_TWRP_Recovery_V2_By_Serajr
And that should be it.
Managed to get everything working bar the TWRP but I think that was my fault.
A download file of everything you need bar the ROM.
Buleste said:
We have progress of sorts.
With prf creator add superSU and create the prerooted ROM.
In TWRP Wipe everything but SDcard and OTG
Install pre rooted ROM
Then Install RICDefieat.zip, byeselinux_flashable.zip, and BusyBox-v1.24.1-Stericson.zip
Power off the phone.
Open Flashtool
Load ftf of .570 and check the Exclude System box and flash the phone
Install TWRP using Z3C_MM_TWRP_Recovery_V2_By_Serajr
And that should be it.
Managed to get everything working bar the TWRP but I think that was my fault.
A download file of everything you need bar the ROM.
Click to expand...
Click to collapse
Worked?
marlontravagli said:
Worked?
Click to expand...
Click to collapse
It seems to be working for me at the moment. Even TWRP.
Edit: TWRP is unstable and sometimes becomes unavailable . If that happens just find SGP621-RICDefeat.zip to enable R/W again and reinstall.
Buleste said:
We have progress of sorts.
With prf creator add superSU and create the prerooted ROM.
In TWRP Wipe everything but SDcard and OTG
Install pre rooted ROM
Then Install RICDefieat.zip, byeselinux_flashable.zip, and BusyBox-v1.24.1-Stericson.zip
Power off the phone.
Open Flashtool
Load ftf of .570 and check the Exclude System box and flash the phone
Install TWRP using Z3C_MM_TWRP_Recovery_V2_By_Serajr
And that should be it.
Managed to get everything working bar the TWRP but I think that was my fault.
A download file of everything you need bar the ROM.
Click to expand...
Click to collapse
ok...this sims to be right, thanks
superpipo said:
ok...this sims to be right, thanks
Click to expand...
Click to collapse
It seems that updating busybox to 1.24.1 stericson stops R/W permissions and the ability to access TWRP however it is easily fixed.
Hi.
I have a Xperia Tablet Z2 (SGP521) with Android 6.0.1 (build 23.5.A.0.570) without root, and I would like to make the root, how can I do?
Thanks in advance.
I'm sorry for my english.
Only way is:
- come back to original rom 4.4.2, using Flashtool http://www.flashtool.net/index.php
- root using Flashtool,
- flash TWRP http://nut.xperia-files.com/path/XZDualRecovery/Older_Releases/XZDualRecovery_2.8.21
- flash a prerooted rom using TWRP 2.8.21, http://forum.xda-developers.com/xperia-z2-tablet/general/prerooted-zip-vmo-ru-ua-kz-t3362729
- flash TWRP 3.0 can download from here http://forum.xda-developers.com/z3/general/wip-sony-android-6-0-mm-t3337357 Recroot combined v 4
To go on recovery, at the vibration when you turn on your device, push volume down button and recovery will start
I made it all working fine
lorisino said:
Only way is:
- come back to original rom 4.4.2, using Flashtool http://www.flashtool.net/index.php
- root using Flashtool,
- flash TWRP http://nut.xperia-files.com/path/XZDualRecovery/Older_Releases/XZDualRecovery_2.8.21
- flash a prerooted rom using TWRP 2.8.21, http://forum.xda-developers.com/xperia-z2-tablet/general/prerooted-zip-vmo-ru-ua-kz-t3362729
- flash TWRP 3.0 can download from here http://forum.xda-developers.com/z3/general/wip-sony-android-6-0-mm-t3337357 Recroot combined v 4
To go on recovery, at the vibration when you turn on your device, push volume down button and recovery will start
I made it all working fine
Click to expand...
Click to collapse
Hello,
why i need something "flash" after rooting? i dont understand what is the "flash" do?
Paja LT said:
Hello,
why i need something "flash" after rooting? i dont understand what is the "flash" do?
Click to expand...
Click to collapse
"Flash" means installing something to the internal memory.
You need to go back to a "rootable" version and after having your terminal rooted you can flash the latest rooted ROM.
Following the instructions on this thread https://forum.xda-developers.com/xp...lipopprerooted231a128z2-tabletsgp511-t3100821 I suggest you:
Flash the Lollipop 23.1.A.1.28 firmware with Flashtool;
Unlock the bootloader (not sure it is strictly needed but better avoid potential issues) with Flashtool (use the Sony website to get the unlock code as the automatic retrieval of Flashtool did not work for me);
Root using the script mentioned in the thread;
Flash the custom recovery;
Flash the rooted 6.0.1 ROM.
maxlnc said:
"Flash" means installing something to the internal memory.
You need to go back to a "rootable" version and after having your terminal rooted you can flash the latest rooted ROM.
Following the instructions on this thread https://forum.xda-developers.com/xp...lipopprerooted231a128z2-tabletsgp511-t3100821 I suggest you:
Flash the Lollipop 23.1.A.1.28 firmware with Flashtool;
Unlock the bootloader (not sure it is strictly needed but better avoid potential issues) with Flashtool (use the Sony website to get the unlock code as the automatic retrieval of Flashtool did not work for me);
Root using the script mentioned in the thread;
Flash the custom recovery;
Flash the rooted 6.0.1 ROM.
Click to expand...
Click to collapse
Thank you for the reply, as i understant the devise will work fine without any flashing? "Flash" means something installing in internal memory, but I do not understand why should I do it ?
please help me to root devise.
flashTool writing: "ERROR Illegal key size or default parameters."
That can i do?
Andriusss said:
please help me to root devise.
flashTool writing: "ERROR Illegal key size or default parameters."
That can i do?
Click to expand...
Click to collapse
You cant make the root with the flashtool! Copy the SuperSu (download newest zip) on your tablet (anywhere) and proceed with this: "TabZ2-lockeddualrecovery2.8.21-RELEASE.installer" you already downloaded from the tutorial. when you launch the "install.bat", the tablet will be rooted and twrp installed it auto-boot into twrp and now you can isntall your copied supersu zip then you can proceed with the tutorial
Got it fixed. In my first CWM Backup from the Dualrecovery Package (installer) was a working boot.img All fine now!