Hi all,
I have a problem with my Samsung Vibrant (Tmobile T959). One of my friend from America gave this phone to me. But it has a small problem. Everything was working on the phone at Turkey but phone can't detect local storage (16 gb). I thought it was a software issue so i tried to re flash the machine. I downloaded stock kernels via samfirmware and flash with odin. But now at the boot screen (Vibrant) it hangs and shut down. Than i tried to flash eugene's stock rom. Now machine automatically enters the boot menu on every boot and said Can't mount E:.
Did my phone bricked? I need to recover my phone. Is there any suggestion for that case?
Look in the noob guide and see if there is one of the methods you have not tried, I recently ran into a similar problem and had to to use a Jig to get it back, you can make one for 2-3 bucks or just buy one for 8 bucks from connextion2005
Just need to get into Download mode and then Odin back to stock, then root and load a custom rom of your choice
Yes i tried everything on the noob guide but still the same. T959 close it self after 5 seconds from Vibrant logo appears.
If you can get into download mode and have odin working on a computer there is hope! There are a few ways to get into download mode to
Sent from my SGH-T959 using XDA App
slslsl said:
Yes i tried everything on the noob guide but still the same. T959 close it self after 5 seconds from Vibrant logo appears.
Click to expand...
Click to collapse
Have you tried the toolbox?
http://forum.xda-developers.com/showthread.php?t=954509
I have :
Baseband Version : GAUSB1A134700-US
Kernel Version : 2.6.32.9-perf
OEM Version : GAUSB1A134700
Build Number : 15247
Stock Android : 2.2.2
Now frankly speaking i do not know about any of those numbers mentioned above !!
I bought the phone a week back. The phone is really laggy in homescreen i.e. for dell stage.
There is a performance fix mentioned in the streak forum, I read like 35-40 pages of the thread also : http://forum.xda-developers.com/showthread.php?t=848487
but this is my first android phone and so i am a complete newbie, I also tried to read the How to root your android thread, but could not understand how to actually do a root ! PLEASE HELP ME !
I DO NOT WANT TO INSTALL ANY CUSTOM COOKED VERSION OF ANDROID, ALL I WANT IS TO INSTALL THAT PERFORMANCE FIX, BUT DONT HAVE EVEN A SINGLE CLUE HOW TO GO ABOUT IT, READ MY PHONE SPECIFICATIONS AND PLEASE HELP ME AND MODERATOR OR SENIOR MEMBER PLEASE HELP !!
There is no performance fix for the 347 (GAUSB1A134700-US) ROM. The only real option for you is to update to ROM 351, which is an official update from Dell. However, if you do that you will have an app called Oovoo in your notification bar on every restart of the phone. It is possible to temporarily shut Oovoo down by going into the phone's settings, tapping on applications, tapping Oovoo and selecting "Force Close", if you don't reboot your phone often. A permanent solution however is only possible by rooting the phone.
EDIT: 351 doesn't have a performance fix either, so don't look for it.
okay,
thanks for such a quick reply !
and anyways when i connect my phone to wifi and then check for updates it says no update found for your phone !
so even then there is no 351 for me still
I had a 347 phone and I never received the update. I simply downloaded it from Dell's website when I knew it had arrived because I knew how to set up the URL to get to it. If you go into the XDA wiki, in the Dell Streak section there is a list of ROM packages. You can get the 351 update package from there.
Now, to do the job, if you are unsure how.
(Source: Radimus' Guide to the Dell Streak (a highly recommended read))
1. Download the build you would like to install.
2. Rename it to update.pkg and transfer it to your SD card.
3a. Shut down the Streak.
3b. Hold the volume up and volume down buttons while powering on the phone. This will place the phone into recovery mode.
4. Using the volume keys to navigate and the camera button to select, select option 2. Software upgrade via Update.pkg on SD card.
5. You will be presented with a warning screen telling you to press the shutter button (camera) to continue or volume down to power off.*
6. Press the shutter and you should see a progress bar. After this completes you will see the Dell logo and after 5-10 minutes your device will load into your new Android build.
*If you get an error telling you to insert an SD card with a valid update.pkg then mount your SD card on your PC and check to see if the update.pkg is actually there. You may need to copy it over again. If you continue to get this error then you will need to reflash the stock recovery using fastboot and try again.
The only thing I recommend doing differently is if it's necessary to reflash the stock recovery, I recommend using Multirecovery Flasher simply because it eliminates the preparation you need to take in order to change the recovery image. Since you're working from an untouched phone, you shouldn't have this problem.
okay, thanks..
i will download the 351 and install it the way u said.
just one last question ??? after upgrading to 351 will all my contacts and apps be there or i will have to install them all over again ?
and for that *.pdf file...thanks man !!! awesome guide !!
Upgrading in this fashion resets the Streak to factory fresh condition, meaning you lose everything. The good news is however that once you set your Google account back up on your phone, your apps will start downloading themselves back to your phone automatically. If you told Google to back up your contacts, they will also return when the Google account is restored to the phone.
Get into the habit of doing manual backups of both apps and your contact list. There are numerous apps on the Market to take care of the apps. The contact list can be backed up from the Contacts settings menu.
okay thanks a lot !!!!
When I updated from wiki I didn't lose anything. Everything was there like I left it except for being rooted.
Sent from my Dell Streak using XDA Premium App
i tried, but i by mistake downloaded the 354 hongkong only version and ended up trying to manually update rom with it...now my streak has gone in some weird recovery mode and nothing is happening.
Please help !!!!!!!!!!!
someone helpppp me ???
i am stuck !!! tried to go from 347 to 351 and stuck in deep s*** !!!
phone gets stuck at logo or says need the update.pkg for 347 to recover phone and i dont have that.
then i tried the test to check if windows recognises it and yes it does..
so now what should i do for starting my phone ???
please help me.
Define "weird recovery mode"?
nthknd said:
When I updated from wiki I didn't lose anything. Everything was there like I left it except for being rooted.
Sent from my Dell Streak using XDA Premium App
Click to expand...
Click to collapse
Was that from flashing the update.pkg or did you install the ROM in a different fashion? I know when I went from 347 to 351 using the update.pkg everything got wiped.
Just updated from there server.
Sent from my Dell Streak using XDA Premium App
nthknd said:
Just updated from there server.
Sent from my Dell Streak using XDA Premium App
Click to expand...
Click to collapse
As long as phone is switching on its fine. You can fix it.
Download MultiRecoveryFlasher.
Put you phone in Fastboot mode. (Power ON with Camera).
Flash the recovery of the ROM Version you are planning to upgrade to.
Put the phone in Recovery by Vol Up + Vol Down when phone reboots.
Update from SD Card Update.pkg.
Let the phone restore/upgrade.
It will be fine after it reboots.
If you update 351 from the dell site, you dont need to flash any recovery.
Sent from my Dell Streak using XDA App
nirajkrm said:
As long as phone is switching on its fine. You can fix it.
Download MultiRecoveryFlasher.
Put you phone in Fastboot mode. (Power ON with Camera).
Flash the recovery of the ROM Version you are planning to upgrade to.
Put the phone in Recovery by Vol Up + Vol Down when phone reboots.
Update from SD Card Update.pkg.
Let the phone restore/upgrade.
It will be fine after it reboots.
Click to expand...
Click to collapse
thats exactly what i did and i have installed the 351 now my phone status says OEM as 357 and baseband as 347
Though it did a lot of time to finally get it done..
and trust me with 351 the phone is now what it should be !!!
much much much better dell stage nice and resposive and no more laggy phones
finally something in streak is worth running !!
cheers mates
THANKS FOR ALL YOUR HELP !!! EVERYBODY !!
THANKS XDA FORUM
Strephon Alkhalikoi said:
Define "weird recovery mode"?
Click to expand...
Click to collapse
it meant that :
the phone goes in recovery mode and kept restarting and that same recovery mode screen kept coming...
but now i am fine and successfully installed 351
Thanks
Hi all,
I just got hold of another faulty streak only this one is partially working so im hoping to fix it. One issue im having is in the recovery menu of this particular streak there is no 'screen calibration' option, you know the white screen you get before you go into fastboot (camera + power). The calibration option is simply not there. I've seen a few streaks lately and they've all had this option so why does this one not have it, any ideas ?
Thanks
drkdeath5000 said:
Hi all,
I just got hold of another faulty streak only this one is partially working so im hoping to fix it. One issue im having is in the recovery menu of this particular streak there is no 'screen calibration' option, you know the white screen you get before you go into fastboot (camera + power). The calibration option is simply not there. I've seen a few streaks lately and they've all had this option so why does this one not have it, any ideas ?
Thanks
Click to expand...
Click to collapse
another way to show the screen calibration option is ... press power button until panel lights on... release it... when the dell logo shows up... press up + down volume button until it goes into recovery menu...
# 3 menu option should show screen calibration :good:
deysmacro said:
another way to show the screen calibration option is ... press power button until panel lights on... release it... when the dell logo shows up... press up + down volume button until it goes into recovery menu...
# 3 menu option should show screen calibration :good:
Click to expand...
Click to collapse
Thanks i found that option via recovery and the streak touch is working again now ... i just wondered why it wasnt in the bootloader menu (power + camera) as its the first streak i've found without the option, perhaps its an older streak model ?
The only older models I know of for the Streak are engineering units with purple cases and pre-release units in Android green.
Well i just updated another streak to the 407 rom and suprise suprise the touch calibration is gone from the bootloader screen. I'm certain it was there before flashing 407 so it must be something to do with the 407 update which is removing it. In other words it should be nothing to worry about .
drkdeath5000 said:
Well i just updated another streak to the 407 rom and suprise suprise the touch calibration is gone from the bootloader screen. I'm certain it was there before flashing 407 so it must be something to do with the 407 update which is removing it. In other words it should be nothing to worry about .
Click to expand...
Click to collapse
have you tried to flash custom rom such as dsc or longhorn and see if the option comes back?
because i am at longhorn 2.7 and can see the screen calibration option....
oh.. forgot to mention... it does not use word screen calibration.. it use word touch calibration instead...
deysmacro said:
have you tried to flash custom rom such as dsc or longhorn and see if the option comes back?
because i am at longhorn 2.7 and can see the screen calibration option....
oh.. forgot to mention... it does not use word screen calibration.. it use word touch calibration instead...
Click to expand...
Click to collapse
Its running DSC v1.3 and the option isnt there. Will have to give longhorn a try to see if it comes back but im guessing its something to do with the official 407 updating the bootloader. Presumably i could flash an earlier stock rom and that would bring it back.
drkdeath5000 said:
Its running DSC v1.3 and the option isnt there. Will have to give longhorn a try to see if it comes back but im guessing its something to do with the official 407 updating the bootloader. Presumably i could flash an earlier stock rom and that would bring it back.
Click to expand...
Click to collapse
no way touch calibration is not there.. i use dsc as well... i have it both at white letter recovery menu and before selecting fastboot mode...
deysmacro said:
no way touch calibration is not there.. i use dsc as well... i have it both at white letter recovery menu and before selecting fastboot mode...
Click to expand...
Click to collapse
How odd. So its definately there on yours, in the white bootloader menu ? Did you flash 406 or 407 before DSC ?
My main streak is running an older DSC version, presuming DSC 1.0 and the calibration option is still there in the bootloader menu so im almost certain 406 / 407 are the culprits. Anyone willing to give it a try ?
drkdeath5000 said:
How odd. So its definately there on yours, in the white bootloader menu ? Did you flash 406 or 407 before DSC ?
My main streak is running an older DSC version, presuming DSC 1.0 and the calibration option is still there in the bootloader menu so im almost certain 406 / 407 are the culprits. Anyone willing to give it a try ?
Click to expand...
Click to collapse
i dont remember which one... it is quite long time ago... i think i am on 406 and then goes straight to custom rom...
My Dell Streak 5 Fastboot is missing "Touch calibration" too
deysmacro said:
i dont remember which one... it is quite long time ago... i think i am on 406 and then goes straight to custom rom...
Click to expand...
Click to collapse
I have the same problem too, when I go to Fastboot via pressing power+camera button simultaneously these days, I do not see the words "Touch calibration" anymore. It is missing now. I only realize it recently. I am concern that this might be due to some corrupt system files on my Streak 5, that might spread to other functions too, soon... will it? Does anyone knows about this? Or how to fix it?
Here my story. I apologies, sorry if it is a long one...
I only realize the missing "Touch calibration" words recently.
My Streak was recently stuck at Dell Logo on boot due to an app I install. I was trying to use this app that enable me to install ROM directly from the SD without going into the Recovery Mode (i.e. turn off phone, press up+down volume buttons and power on button simultaneously). Just click on this app menu to update to latest CWM and then click another menu to load a ROM to flash. That ended in disaster, really made my Streak to just stuck at Dell logo instead of flashing the intended ROM. When I remove the battery and put it back, I go to recovery mode. The CWM recovery mode was corrupted. If I am not mistaken, I was not able to go into Fastboot either. At that time, I was using 16GB innerSD when this happened. I replaced back my original innerSD 2GB, flash it with CWM and Longhorn 2.9.3. I was lucky it worked.
Next, I was searching for a way to update the baseband to 407 (GAUSB1A1406214-EU). My streak was on 347. As I understood, my Dell Streak suppose to use baseband 407 if I choose Longhorn 2.9.3 {{ Please correct me if I am wrong, I am still new at doing all these mod }} It took me almost a month to upgrade the baseband to 407, all end up with failure to upgrade/no change. I even accidentally downgraded my Streak to 305 after I flash AMSS and DSP1 which were in QDL folders I downloaded from XDA (Nobody's fault but mine). But I finally manage to do it, after reading someone feedback (sorry can't remember) that says, to go flash 350 ROM first since it region 14, before using auto-update menu on the Dell Streak to get to ROM 407 installed. I use 407 ROM for just a short while and then I flashed to Longhorn 2.9.3 using CWM recovery.
Like I said, I only realize it recently. So, in my case, it is either the 407 Recovery+ROM update or the Corrupted Flashing method that lead to the lost of the "Touch calibration" on Fastboot screen. Should I get this fixed?
EDITED:
After many times using QDL Tools, and upgrade to Stock ROM 407, I have CONFIRMED the "Touch Calibration" will disappear. No cause for alarm. It seems Dell removed the option from the Fastboot Mode screen on 407.
Razak RK said:
I have the same problem too, when I go to Fastboot via pressing power+camera button simultaneously these days, I do not see the words "Touch calibration" anymore. It is missing now. I only realize it recently. I am concern that this might be due to some corrupt system files on my Streak 5, that might spread to other functions too, soon... will it? Does anyone knows about this? Or how to fix it?
Here my story. I apologies, sorry if it is a long one...
I only realize the missing "Touch calibration" words recently.
My Streak was recently stuck at Dell Logo on boot due to an app I install. I was trying to use this app that enable me to install ROM directly from the SD without going into the Recovery Mode (i.e. turn off phone, press up+down volume buttons and power on button simultaneously). Just click on this app menu to update to latest CWM and then click another menu to load a ROM to flash. That ended in disaster, really made my Streak to just stuck at Dell logo instead of flashing the intended ROM. When I remove the battery and put it back, I go to recovery mode. The CWM recovery mode was corrupted. If I am not mistaken, I was not able to go into Fastboot either. At that time, I was using 16GB innerSD when this happened. I replaced back my original innerSD 2GB, flash it with CWM and Longhorn 2.9.3. I was lucky it worked.
Next, I was searching for a way to update the baseband to 407 (GAUSB1A1406214-EU). My streak was on 347. As I understood, my Dell Streak suppose to use baseband 407 if I choose Longhorn 2.9.3 {{ Please correct me if I am wrong, I am still new at doing all these mod }} It took me almost a month to upgrade the baseband to 407, all end up with failure to upgrade/no change. I even accidentally downgraded my Streak to 305 after I flash AMSS and DSP1 which were in QDL folders I downloaded from XDA (Nobody's fault but mine). But I finally manage to do it, after reading someone feedback (sorry can't remember) that says, to go flash 350 ROM first since it region 14, before using auto-update menu on the Dell Streak to get to ROM 407 installed. I use 407 ROM for just a short while and then I flashed to Longhorn 2.9.3 using CWM recovery.
Like I said, I only realize it recently. So, in my case, it is either the 407 Recovery+ROM update or the Corrupted Flashing method that lead to the lost of the "Touch calibration" on Fastboot screen. Should I get this fixed?
Click to expand...
Click to collapse
I too have the same problem, recently upgraded with 2.3 from 2.2.2 but after a week my screen is not responding and did thrice screen calibration but no use . After that I roll backed with my previous version 2.2.2. Even though no change still my screen is not responding.But I can able to touch few things on my screen but not fully
Could you please help on this
drkdeath5000 said:
Well i just updated another streak to the 407 rom and suprise suprise the touch calibration is gone from the bootloader screen. I'm certain it was there before flashing 407 so it must be something to do with the 407 update which is removing it. In other words it should be nothing to worry about .
Click to expand...
Click to collapse
nsrpani said:
I too have the same problem, recently upgraded with 2.3 from 2.2.2 but after a week my screen is not responding and did thrice screen calibration but no use . After that I roll backed with my previous version 2.2.2. Even though no change still my screen is not responding.But I can able to touch few things on my screen but not fully
Could you please help on this
Click to expand...
Click to collapse
Did you try screen calibration in Recovery Mode? I read somewhere in xda-dev. about this, if my memory is correct... And I can't remember where I found it. Do it at your own risk...
Turn off your phone.
Clean your screen with just slightly wet tissue or cloth, ensure to wipe it clean and dry.
Don't turn on your phone.
Press volume up, volume down, power on button simultaneously together. Don't let go until the Recovery Mode i.e. Black Screen with 4 options comes out.
Select Screen Calibration, and let it run, don't touch anything at all.
If I am not mistaken, the phone will booth up after that.
Best way is to use the search function in xda-dev, to find solutions given by Senior Members on this matter.
Goodluck.
Razak RK said:
Did you try screen calibration in Recovery Mode? I read somewhere in xda-dev. about this, if my memory is correct... And I can't remember where I found it. Do it at your own risk...
Turn off your phone.
Clean your screen with just slightly wet tissue or cloth, ensure to wipe it clean and dry.
Don't turn on your phone.
Press volume up, volume down, power on button simultaneously together. Don't let go until the Recovery Mode i.e. Black Screen with 4 options comes out.
Select Screen Calibration, and let it run, don't touch anything at all.
If I am not mistaken, the phone will booth up after that.
Best way is to use the search function in xda-dev, to find solutions given by Senior Members on this matter.
Goodluck.
Click to expand...
Click to collapse
Thank you for your reply. Tried Screen Calibration in Recovery mode thrice but no use. Any other solution?
Other instructions on the user manual :~
~ factory reset if device can't boot up
~ flash recovery & matching ROM if system is currupted
~ recalibrate screen (obviously you've done enough, but worth checking if your steps correct - see picture taken from User manual in DS5 SD folder)
Sent from my Dell Streak using xda app-developers app
@nsrpani,
Have you solve your problem? If you have, please share your solution here, so that if other have the same problem, they will know how to solve it.
If you have not solve it, have a look at this page on how to Repair or Reset your DS5:
Unbrick/Repair/Reset your Streak- QDL Tool and ADB
Hi Razak, Sorry for the late reply. I will try this process and let u know soon.
---------- Post added at 02:12 PM ---------- Previous post was at 02:01 PM ----------
HI Razak, Tried again screen calibration as per your screen shot attached. But still issue was there...I will try your second option that is with QDL tool I will try and let you know soon.
nsrpani said:
Hi Razak, Sorry for the late reply. I will try this process and let u know soon.
---------- Post added at 02:12 PM ---------- Previous post was at 02:01 PM ----------
HI Razak, Tried again screen calibration as per your screen shot attached. But still issue was there...I will try your second option that is with QDL tool I will try and let you know soon.
Click to expand...
Click to collapse
Hi Razak, I am trying to repair my DS with QDLTool but the drivers provided is for other than Windows 7. I am using Windows 7, 64 bit. I have tried with win 32 but its not working for me.
nsrpani said:
Hi Razak, I am trying to repair my DS with QDLTool but the drivers provided is for other than Windows 7. I am using Windows 7, 64 bit. I have tried with win 32 but its not working for me.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=42807697
Sent from my Dell Streak 5
Powered by INDOSAT
nsrpani said:
Hi Razak, I am trying to repair my DS with QDLTool but the drivers provided is for other than Windows 7. I am using Windows 7, 64 bit. I have tried with win 32 but its not working for me.
Click to expand...
Click to collapse
I am using Window XP, so, I don't know about Win7. I am sorry, I cannot help you more. Perhaps senior members could help on this matter.
Other things that I can comment are:
When I use the QDLTool.exe from the QDL Tool folder, it did not work, i.e. it Failed.
So, I run the QDLTool.exe from the streakflash folder first. I get it pass.
Then, I run the QDLTool.exe from the QDL Tool folder. Then only it can pass.
At one time, my innerSD is so corrupted that I have to remove it and erase everything on it, then I put it back in and run both QDLTool.exe as I mention above. I erase the innerSD using USB Image Tool 1.59, which I get from this post: http://forum.xda-developers.com/showpost.php?p=31067359&postcount=2
My son was trying to put a different ROM on his phone and about half way through it crashed. The phone now just keeps rebooting.
Tried the Power on / Vol down to try to get to android recovery, but it just goes blank. All other options cause the phone to just reboot and I try again (like a fool).
Is there any hope for me to get this phone working or is it now a paperweight?
Let me know if you need more information. I will provide what I know.
Thanks,
Jim
coachnh said:
My son was trying to put a different ROM on his phone and about half way through it crashed. The phone now just keeps rebooting.
Tried the Power on / Vol down to try to get to android recovery, but it just goes blank. All other options cause the phone to just reboot and I try again (like a fool).
Is there any hope for me to get this phone working or is it now a paperweight?
Let me know if you need more information. I will provide what I know.
Thanks,
Jim
Click to expand...
Click to collapse
Sounds like a bootloop. Did you look here?
I've had this happen when I attempted to flash my Atrix with the battery less.than 50%.charged. I was able to get it to boot up (after flashing 2.3.4 sbf via RSD) but it just rebooted itself every 2 mins. My warranty was up but, I went on Motorola's website and after using their troubleshooter, they gave me a reference number and address to mail in my device for repair. In about a week I got the phone back. I think they gave me a different device because I can now run 1.6 GHz OC kernels without my phone overheating. Good luck......
Sent from my MB860 using xda premium
Pretty much the last 6 months of 2012 my Dell has been rebooting when I've tried to use it. It can stay on for a minute if I'm lucky, but then it reboots, sometimes gets stuck on Dell logo. Doesn't seem to be a battery cover issue. I installed Olleh on it to hopefully fix it, but that didn't fix it, I tried replacing the internal SD, which also didn't fix it. I'm at a loss. Was an expensive contract, and I didn't get much use out of it, so it would be a shame to not be able to use it again, but it happens. At least I know not to use a Dell product again.
streak 5
android 2.3.3
baseband GAUSB1A1406214-EU
kernel 2.6.35.7-perf
OEM GAUSB1A140714
Johnny Grunge said:
Pretty much the last 6 months of 2012 my Dell has been rebooting when I've tried to use it. It can stay on for a minute if I'm lucky, but then it reboots, sometimes gets stuck on Dell logo. Doesn't seem to be a battery cover issue. I installed Olleh on it to hopefully fix it, but that didn't fix it, I tried replacing the internal SD, which also didn't fix it. I'm at a loss. Was an expensive contract, and I didn't get much use out of it, so it would be a shame to not be able to use it again, but it happens. At least I know not to use a Dell product again.
streak 5
android 2.3.3
baseband GAUSB1A1406214-EU
kernel 2.6.35.7-perf
OEM GAUSB1A140714
Click to expand...
Click to collapse
i have the same problem excatly like you are, and i search the net & not got the answer i tried streak flash & Qdltool but nothing happend the problem keep remain..and i'm still not able to get the fastboot mode...is there any one can help this situation?? here need help here
Johnny Grunge said:
Pretty much the last 6 months of 2012 my Dell has been rebooting when I've tried to use it. It can stay on for a minute if I'm lucky, but then it reboots, sometimes gets stuck on Dell logo. Doesn't seem to be a battery cover issue. I installed Olleh on it to hopefully fix it, but that didn't fix it, I tried replacing the internal SD, which also didn't fix it. I'm at a loss. Was an expensive contract, and I didn't get much use out of it, so it would be a shame to not be able to use it again, but it happens. At least I know not to use a Dell product again.
streak 5
android 2.3.3
baseband GAUSB1A1406214-EU
kernel 2.6.35.7-perf
OEM GAUSB1A140714
Click to expand...
Click to collapse
You are on 5treak XDA place, why u not try on Dell Streak 5 Android Development, if u like Stock Style u can try install DSC 2.3 ROM from master n0p. If u want to try another style u can try install MIUI 2.4.20 from nitin1978 or PCM7-Streak from nom051205. I use MIUI 2.4.20 from nitin1978 with n0p kernel phoenix U30 for MIUI n never get reboot when i use it.
---------- Post added at 05:10 AM ---------- Previous post was at 05:05 AM ----------
nedinoval said:
i have the same problem excatly like you are, and i search the net & not got the answer i tried streak flash & Qdltool but nothing happend the problem keep remain..and i'm still not able to get the fastboot mode...is there any one can help this situation?? here need help here
Click to expand...
Click to collapse
try search carefully on Streak 5 Android Development, it's all explain clearly. If u want to go to FASTBOOT mode push POWER + CAMERA button together until display white n then u on FASTBOOT mode.
I search and read all the problem carefully on this dell forum and the all tell about how to fastboot by pressing the power+cam button..well my problem is the dell get dumb!! When i press those two button the phone has no respone at all..but when i press the two volume i got my recovery mode..that the problem how can you get into fastboot while the phone is dumb and no respone at all while pressing power and cam button