Last night I was playing around with Viper Rom. There was a phone info menu with a bunch or settings that had to do with the network settings. The menu to get to this from other ROMs is *#*#INFO#*#*
I changed a setting for preferred network or something and the radio band setting. Now I can't seem to default it. I did a hard reset and even RUU back to stock. Nothing seems to work. Looked into the CDMA workshop settings. Nothing in there seems to help. Any suggestions would be greatly appreciated. If you have more questions I will try to answer. I'm stumped on this one. Oh and whenever I try to change the band again and it freezes and restarts.
Please help
Are you getting roaming charges applied ? (You can call customer care and confirm) .....Because after I flashed CM7.2 on my wildfire I used to get the roaming notification and the signal showed a R...roaming. But when I put in my sensation, when it was stock ....I didn't get the roaming thing.
Also when I put another network sim in wildfire I didn't get the R.
Freezing and restart used to happen too when I would get a no signal suddenly. Happened when I tried to choose a network manually.
Sent from my HTC Sensation XE with Beats Audio Z715e using xda app-developers app
Echo237 said:
Are you getting roaming charges applied ? (You can call customer care and confirm) .....Because after I flashed CM7.2 on my wildfire I used to get the roaming notification and the signal showed a R...roaming. But when I put in my sensation, when it was stock ....I didn't get the roaming thing.
Also when I put another network sim in wildfire I didn't get the R.
don't know about freezing and restart.
Sent from my HTC Sensation XE with Beats Audio Z715e using xda app-developers app
Click to expand...
Click to collapse
Phone doesn't work on a SIM. Not sure about the charges, it looks like its just running off Verizon towers. I want to say I messed up the default radio settings that carry over through flashes. Just not sure exactly how to default them
southernstyle said:
Phone doesn't work on a SIM. Not sure about the charges, it looks like its just running off Verizon towers. I want to say I messed up the default radio settings that carry over through flashes. Just not sure exactly how to default them
Click to expand...
Click to collapse
there was a thread on this at one time, prolly back a few pages. I will try and find it.
Sent from my EVO using xda app-developers app
---------- Post added at 09:39 AM ---------- Previous post was at 09:10 AM ----------
Found it. You need to reprovision (i think)
##rtn#
http://forum.xda-developers.com/showthread.php?t=1756742
00mred00 said:
there was a thread on this at one time, prolly back a few pages. I will try and find it.
Sent from my EVO using xda app-developers app
---------- Post added at 09:39 AM ---------- Previous post was at 09:10 AM ----------
Found it. You need to reprovision (i think)
##rtn#
http://forum.xda-developers.com/showthread.php?t=1756742
Click to expand...
Click to collapse
you sir saved my life. I am sending a donation your way. Thanks 100x
I would like to add to this post that after reprovisioning, I actually get a better, more stable 3G connection. My phone used to jump into 1x mode a lot. Now it's steady in 3G. This may be a fix for that common issue on this phone? Just a shot in the dark. It's significantly helped my battery last longer today.
Related
Has there ever been a fix for the issue where the phone randomly switches back and forth between 3G and wifi? i constantly get "The page can not be displayed" message. My phone does it quite a bit when I am at home. Very annoying!!
I never had that issue. I dont see other threads about that being a problem either. Maybe u have poor wifi signal?
Short_Straw said:
I never had that issue. I dont see other threads about that being a problem either. Maybe u have poor wifi signal?
Click to expand...
Click to collapse
No, it happens but people are starting to give up on the EVO LTE.
Mine does this and I have been trying to figure it out as well.
Note: switching Rom's doesn't help
I dont have any problems with 3g/wifi switching. I use wifi all day at work no issues whatsoever. And people giving up on the lte? I dont see it.
What ROM are you using? I'm running Decks CM10 and never had that issue.
Sent from my CM10 Evo LTE
for the most part that wifi issue was fixed in one of the OTA's we got.. i used to have problems with my wifi staying on when i was out of range.. after the OTA we got that had the fix in it,, i havent had any problems with it since...
The Ota for me never fixed the problem. I may try CM10. I have heard that CM10 uses different drivers for Wifi.
cmdauria said:
Has there ever been a fix for the issue where the phone randomly switches back and forth between 3G and wifi? i constantly get "The page can not be displayed" message. My phone does it quite a bit when I am at home. Very annoying!!
Click to expand...
Click to collapse
I as well have not had problems like that unless my WiFi router is far away.
I did see a post before about the antenna springs in some evo lte's making poor contact and they fixed it. Not sure if that's your problem. I would make sprint give me another one.
Sent from my EVO using xda premium
I read a post about stretching the springs and tried it. Surprisingly my wifi signal increase dramatically.
Jack
P.S. I never had the wifi dropping problem just did this to increase my range and it did.
Sent from my EVO using xda premium
T3CHW0LF said:
What ROM are you using? I'm running Decks CM10 and never had that issue.
Sent from my CM10 Evo LTE
Click to expand...
Click to collapse
Has anybody else tried this and have you seen better results?
midmadn said:
I read a post about stretching the springs and tried it. Surprisingly my wifi signal increase dramatically.
Jack
P.S. I never had the wifi dropping problem just did this to increase my range and it did.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
What springs are those?
Sent from my EVO using xda app-developers app
---------- Post added at 07:35 PM ---------- Previous post was at 07:26 PM ----------
I am convinced that this problem is not a ROM issue. I get the problem on every ROM I've flashed, MeanROM, Fresh, Sinister and I I'm now currently UREvo. I have the same on every one. I've tried current kernels as well and nothing.
My problem is while leaving the range of a wifi network it will not disconnect and then connect to mobile network. Then the same thing happens in reverse when going from mobile to wifi it will not make the hand off automatically. I have to manually turn all radios off then back on or reboot altogether.
I have decided to unroot, relock and flashRUU and see if I have the same problem. If so, I'm headed back to Sprint for warranty replacement.
Sent from my EVO using xda app-developers app
treetolber said:
What springs are those?
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
They are the metal spring tabs under the shiny black cover on the back of the phone. Not the ones on the cover itself but the ones on the phone under the cover.
Go to a spot where your Wi-Fi signal starts to fade and take note of your location and signal strength. Then remove the back cover and gently bend those metal contacts up away from the phone a very small amount. You may not even be able to see a difference. I used a very small screwdriver. Then replace the cover making sure it is firmly attached. Go back to that location and notice you now have full signal strength there and can go a bit farther before it drops. (it did for me anyways).
DISCLAIMER- As usual, I assume no responsibility if you break your phone. I'm just passing on a technique I learned in a forum that was a positive experience for me.
Jack
Sent from my EVO using xda premium
It is being addressed in the 4+ jb update that's being tested for the Hox
Sent from my EVO using xda premium
Ok so my data has not been working at all the past few days. I have tried stock ROM, meanrom, and cm10. It would work for a few minutes and then go to nothing. I finally tried switching it to just CDMA and it works... I'm in a 4g lte area so why would that be? Also if I try to update prl, firmware, or profile it just keeps searching for hours. What should I do?
Sent from my EVO using XDA Premium HD app
Do you have the newest radios? They end in .809 or somethin, check your baseband.
Sent from my EVO using xda app-developers app
---------- Post added at 03:35 PM ---------- Previous post was at 03:34 PM ----------
.0809 to be exact.
Sent from my EVO using xda app-developers app
Its 1.12.11.0809. Does that sound right?
Sent from my EVO using XDA Premium HD app
spencer311 said:
Its 1.12.11.0809. Does that sound right?
Sent from my EVO using XDA Premium HD app
Click to expand...
Click to collapse
yes
HTC EVO LTE
Is there anything els that could be causing this?
Sent from my EVO using XDA Premium HD app
spencer311 said:
Is there anything els that could be causing this?
Sent from my EVO using XDA Premium HD app
Click to expand...
Click to collapse
if you're on a sense rom try doing the ##72786# on your phone pad that is going torefresh all your service including data
HTC EVO LTE
Thanks! Flashing stock with goodies right now to try it out. If I flash back to cm10 will that cancel out all the updates though?
Ok I tried it but I don't have the password... Even tried the meid converter and used that password and it still didn't let me.
spencer311 said:
Thanks! Flashing stock with goodies right now to try it out. If I flash back to cm10 will that cancel out all the updates though?
Ok I tried it but I don't have the password... Even tried the meid converter and used that password and it still didn't let me.
Click to expand...
Click to collapse
if you dont know your msl and if you're connected to wifi you can download msl reader from the play store... or you can call sprint and they'll give it to you...
HTC EVO LTE
A couple of days ago, my phone had no 3G service, but it would sometimes pickup 4G but my connection usually didn't last very long.
I was running the updated radio 1.12.11.0809.
I downgraded back to the stock 1.13.651.1 ROM and I had my 3G connection back.
Im sticking with the stock radio.
they are upgrading your tower in your area. that i am 100000% sure of
that happened to me also, and a couple of days later it will be back to normal again, and switching it back to cdma will work.
when they finish upgrading the towers is should be good again.
flex360 said:
they are upgrading your tower in your area. that i am 100000% sure of
that happened to me also, and a couple of days later it will be back to normal again, and switching it back to cdma will work.
when they finish upgrading the towers is should be good again.
Click to expand...
Click to collapse
Well It has been over a week... maybe even 2 weeks. Is that normal?
this is happening to me, I was on the phone with sprint for over an hour....I have done the ##78286# code with my MSL and it resets, but I still boot up to just a x/signal bar....Somehow i think my radios corrupted and will not be able to use this phone....
edit: i was able to get signal, but still having problems now after a full ##786# code
I have a note 2 rooted and unlocked running beans. I have it on global mode using an att sim. But when I put in a Verizon 4g sim I don't get cdma lte just signal bars. Would I just need to do this?
Prerequisites
1. A windows, Linux, or Mac computer.
*2. Ensure your*Java is up-to-date*
3. Your device must be rooted.*InstructionsClick Settings>Developer Options>Usb DebuggingPlug your device into the computerclick the Do It! button in CASUALOn your device, enable the Hidden Menus from the screen that pops upClick the Do It! button againEnjoy the hidden menus features
Or is it the wrong thing to do ? Nothing is wrong with my IMEI but I don't have a ERI whatever that is. I am very new at this. I appreciate any help and clarification. Thanks !!!
Sent from my SCH-I605 using Tapatalk 2
So it appears voice or data dont work. I am reflashing beans but it hangs at activating then says it can't be activated any help ?
Deleted. Sorry I misread.
---------- Post added at 04:19 PM ---------- Previous post was at 04:16 PM ----------
Go into the hidden menu and do ##rtn# should be the last one. If I remember right this may cause a factory reset as well so be sure to back up.
Sent from my SCH-I605 using xda app-developers app
cnotes2019 said:
So it appears voice or data dont work. I am reflashing beans but it hangs at activating then says it can't be activated any help ?
Click to expand...
Click to collapse
You *might* have to go back to stock if the SIM can't be activated for Verizon. The debloating process might have removed something needed.
Would a factory reset delete beans plus root/relock bootloader ? Thanks ! I will try both of your suggestions and keep you posted !
I'm just curious have any if you powered the phone on without the sim. Then powered down, put the sim back and powered on?
It is such an easy thing?, but maybe someone overlooked it.
Sent from the dark on a Note 2
What do you mean by posting the phone? Thanks for the suggesting
Sent from my SCH-I605 using Tapatalk 2
cnotes2019 said:
What do you mean by posting the phone? Thanks for the suggesting
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
I meant swype got me! I fixed the post
Sent from the dark on a Note 2
the same thing happened to my phone when i tried an att rom. i have a replacement on the way now but i thought of an idea. could you go back to stock and when you put the sim card in go to settings> more settings>mobile networks> Access point names> and select the verizon one? if you could report back i think it might help me too but i dont want to try it because i dont want to go through the hassle of replacing the sim card again from my loaner stratosphere right now. mucho appreciated.
I've gone through this multiple times now. ##Rtn# will fix it, and you just need to make sure you didn't accidentally get a 3g only prl somehow
Sent from my SCH-I605 using xda app-developers app
some sort of the same issue
WarlockLord said:
I've gone through this multiple times now. ##Rtn# will fix it, and you just need to make sure you didn't accidentally get a 3g only prl somehow
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
using ###rtn# ive tried fixing my issue but didnt really help. heres the deal i flashed cm 10.1 nightly 02-07-13 after flashing and then downgrading because of bluetooth problems my phone has two or 3 signal bars but wont connect to make the call out and it wont send texts. my imei is intact and min is correct according to verizon. i even had the sim changed. changed from running on global to juszt verizon lte cdma and evdo and doesnt change anything. any idea's ?
I just flashed my Sprint Htc Evo 3D to Cricket Wireless and now my data speeds are 15klbs downloading and 8klbs uploading.I am running OTA ICS Rooted and unlocked.I have changed my proxys under the Http settings in Epst and still no change.I have flashed over 9 phones(This being the first sprint phone)and have never had any trouble like this.If someone could help me i would so greatly appreciate it.I am on the $70 Plan and am no where near my data limit.Thanks everyone who takes the time out to try and help me i wouldnt be worried about it but i use my tethering which is the only source of internet i have for my laptop..I work from home online and im losing money on kind of this.PLEASE anyone that sees this Please if you can take the time out to help me i would be so thankful.Thank you so much.My Question is can anyone please help me figure out how to fix my data speeds?I have called Cricket and everything is good on there end so i know its this phone.Also my wife has a phone on the same line and her data speeds are perfect..
Have you tried updating the radio version or do you have poor signal? I'm on cricket and if I have a not so great signal my data basically comes to a crawl. You also could try *22804 and update the prl ota, you might have the wrong version.
Sent from my PG86100 using xda app-developers app
---------- Post added at 12:40 PM ---------- Previous post was at 12:31 PM ----------
sniper849 said:
Have you tried updating the radio version or do you have poor signal? I'm on cricket and if I have a not so great signal my data basically comes to a crawl. You also could try *22804 and update the prl ota, you might have the wrong version.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Here's the proxy settings I'm currently using that work okay for me....
RTSP/HTTP Setting
RTSP proxy IP to 0.0.0.0 or You can leave this blank if you like
RTSP proxy Port to 0 (Zero)
HTTP proxy IP to 0.0.0.0 or You could leave this blank if you like
HTTP proxy port to 0 (Zero)
Sent from my PG86100 using xda app-developers app
How do i update the Radio???I think my radio version is 1.09.Which came with the ICS OTA update from sprint...At first when i first flashed myphone it wouldnt let me dial *228.I have tried about 9 different PRL's and now finally i can dial *228.But i live exactly 1 Block from the nearest Cricket Wireless tower.Most of the time i have Full Bars at home and its still slow..But i flashed my phone myself and i thought i did something wrong so i paid a flashing service to do it.But then after they did it and it was still slow i reflashed it again.What is your Download speeds?
Yeah thats the exact proxy i am using..What rom are you on?Because i also thought maybe if i flashed a custom rom it wouldnt cause me any more trouble.Because i really like this phone and i want to keep it but im so ready to trash it because of the Data speeds...I talk on my phone maybe 10mins out of a whole day and the rest of the time i use it for internet..
I
auberry05 said:
How do i update the Radio???I think my radio version is 1.09.Which came with the ICS OTA update from sprint...At first when i first flashed myphone it wouldnt let me dial *228.I have tried about 9 different PRL's and now finally i can dial *228.But i live exactly 1 Block from the nearest Cricket Wireless tower.Most of the time i have Full Bars at home and its still slow..But i flashed my phone myself and i thought i did something wrong so i paid a flashing service to do it.But then after they did it and it was still slow i reflashed it again.What is your Download speeds?
Click to expand...
Click to collapse
When I have full signal I get about 1 - 1.5 mb
Sent from my PG86100 using xda app-developers app
---------- Post added at 05:51 PM ---------- Previous post was at 05:50 PM ----------
I'm using Mazda s team dirt jelly bean rom
Sent from my PG86100 using xda app-developers app
---------- Post added at 05:53 PM ---------- Previous post was at 05:51 PM ----------
If you wanted to retry flashing the phone yourself here's the guide I used to do it..
http://www.cricketusers.com/sprint-...tc-evo-3d-cricket-talk-text-mms-internet.html
Sent from my PG86100 using xda app-developers app
---------- Post added at 05:55 PM ---------- Previous post was at 05:53 PM ----------
Oh and your already on the latest radio version so no worries
Sent from my PG86100 using xda app-developers app
---------- Post added at 05:57 PM ---------- Previous post was at 05:55 PM ----------
I'm currently on prl 35613, you could try that one
Sent from my PG86100 using xda app-developers app
Ok well i am going to give it all another try.Yeah thats the exact guide i used.I am using PRL 35657 so ours is awfully close and i got mine from the *228 programing.So im about to try and reflash and see where i get and i will keep u posted.Thank you so much for offering your help i greatly appreciate it alot.If the reflash doesnt work then im going to find a way to flash another rom but im having problems with getting s off with the wire trick which it isint the wire trick itself its the script saids "Error Booting" and im on Hboot 1.58 which i have have heard is the hardest to get the s off on.I have used HTCDev Unlock Bootloader and have gotten Root but cant get S-Off
Okay, cool. Good luck and I'll be happy to help where I can
Sent from my PG86100 using xda app-developers app
The wire trick is very tricky to get to work, I was in hboot 1.58 when I first bought this phone and I had to have HTC sync and the adb drivers installed in order for that program to find my phone, and if you have any trouble with the timing of the wire trick look it up on you tube, I had to do that lol
Sent from my PG86100 using xda app-developers app
I got my speeds up to 562KB/s sometimes they go all the way up to 900 and something KB/s.But my tethering is still running a little slow with downloads and uploads.Do u know what could cause that??
Hmm no idea, I don't use tethering on my phone to be honest so I'm not really sure
Sent From My Cricket Evo 3D
Same story, same problem. Using dirty unicorns. Very slow data speed. I had to flash an HTC one v from virgin to cricket and get great data speed. Maybe because the sprint firmware is different and routes data a different way? I am still searching.
Sent from my PG86100 using xda premium
I'm trying out the viper3d rom at the moment and data seems to be faster, I think it's just hit and miss with certain roms maybe?
Sent from my shooter using xda premium
Dirty unicorns. 3 bars
Sent from my PG86100 using xda premium
That's not bad at all, to be honest I get about that for my speed as well, the only way I've been able to pull off the full 1mb/s is at my work where I have full signal
Sent from my PG86100 using xda premium
I was being a dumbass and dialed *228 thinking it will update my PRL and improve my signal. Immediately after programming, I was limited to 3g connection. I lost 4g/LTE connection. I fixed this by going to the Verizon store and asked them for a new SIM card, which was free of charge.
*228 is for 3g phones ONLY. Not for the GS4, unless you like 3g connection speeds...
It is a relatively simple solution, but it can also be easily avoided. Save yourself the trouble, and don't make the same mistake I did.
space_pimp said:
I was being a dumbass and dialed *228 thinking it will update my PRL and improve my signal. Immediately after programming, I was limited to 3g connection. I lost 4g/LTE connection. I fixed this by going to the Verizon store and asked them for a new SIM card, which was free of charge.
*228 is for 3g phones ONLY. Not for the GS4, unless you like 3g connection speeds...
It is a relatively simple solution, but it can also be easily avoided. Save yourself the trouble, and don't make the same mistake I did.
Click to expand...
Click to collapse
When you have cable TV and nothing seems to be on you get bored. When you get bored you try to improve your cell phones data connection. When you try and improve your data connection you use *228 when you use *228 you limit you data speeds to 3g and it requires a new sim card. Avoid using *228, ditch your cable TV and sign up for for direct tv. Lol
thunderbls said:
When you have cable TV and nothing seems to be on you get bored. When you get bored you try to improve your cell phones data connection. When you try and improve your data connection you use *228 when you use *228 you limit you data speeds to 3g and it requires a new sim card. Avoid using *228, ditch your cable TV and sign up for for direct tv. Lol
Click to expand...
Click to collapse
Hahaha!! So true, well said
well duh lol.
but if you do happen to dial it, lte will eventually come back on in the next week, phone just auto prl's now so it takes a little.
Sent from my SCH-I545 using Tapatalk
joshm.1219 said:
well duh lol.
but if you do happen to dial it, lte will eventually come back on in the next week, phone just auto prl's now so it takes a little.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Oh really, that's interesting. Thanks for the heads up!
I believe stock touch wiz blocks from dialing it
Sent from my SCH-I545 using Tapatalk
thunderbls said:
When you have cable TV and nothing seems to be on you get bored. When you get bored you try to improve your cell phones data connection. When you try and improve your data connection you use *228 when you use *228 you limit you data speeds to 3g and it requires a new sim card. Avoid using *228, ditch your cable TV and sign up for for direct tv. Lol
Click to expand...
Click to collapse
Now that IS funny!!!! :good: :highfive:
joshm.1219 said:
well duh lol.
but if you do happen to dial it, lte will eventually come back on in the next week, phone just auto prl's now so it takes a little.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Do you have to be on touchwiz for auto prl to fix?
jamesd1085 said:
Do you have to be on touchwiz for auto prl to fix?
Click to expand...
Click to collapse
don't think so but I'm not sure
Sent from my unknown using Tapatalk
I did that once. Apparently you wipe the SIM card when you do that and you have to get a whole new SIM card. I was having data issues as well and thought, I'll just reprogram the phone with *228. Yeah, no that didn't work.
Sent from my SCH-I545 using xda app-developers app
Well unfortunately I found this thread after the fact. Can anyone confirm what joshm said? Will it come back in a bit or should I just give V a call?
Sent from my SCH-I545 using XDA Premium 4 mobile app
pacman9889 said:
Well unfortunately I found this thread after the fact. Can anyone confirm what joshm said? Will it come back in a bit or should I just give V a call?
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I made the same mistake too. I waited a few days and no 4G/LTE came back. I tried going to the local corporate store and they wouldn't even talk to me as I was running a custom recovery & rom (on MDK bootloader!). I went to one of the retail stores and they helped me out with a new SIM card.
thunderbls said:
When you have cable TV and nothing seems to be on you get bored. When you get bored you try to improve your cell phones data connection. When you try and improve your data connection you use *228 when you use *228 you limit you data speeds to 3g and it requires a new sim card. Avoid using *228, ditch your cable TV and sign up for for direct tv. Lol
Click to expand...
Click to collapse
That's funny!!
ROFL!!
Sent from my SCH-I545 using Tapatalk
Terri M said:
That's funny!!
ROFL!!
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Thank you .. I had just got through watching the eye patch one before reading this thread so... good times.
So is there a way to do the equivalent of *228 for your LTE that updates the prl for your 3g?
Sent from my SCH-I545 using Tapatalk
beez1717 said:
So is there a way to do the equivalent of *228 for your LTE that updates the prl for your 3g?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
if u accidently press *228 shutdown phone take sim out wait five minutes and then puy sim back in and reboot should auto push back to 4g prl
Sent From My Hyperdriven S4
---------- Post added at 09:08 PM ---------- Previous post was at 09:06 PM ----------
ebsk8er06 said:
if u accidently press *228 shutdown phone take sim out wait five minutes and then puy sim back in and reboot should auto push back to 4g prl
Sent From My Hyperdriven S4
Click to expand...
Click to collapse
4g prls are checked for updates when phone is cut off and cut back on after a 5 min period, what I was told from verizon a year ago
Sent From My Hyperdriven S4
---------- Post added at 09:09 PM ---------- Previous post was at 09:08 PM ----------
ebsk8er06 said:
if u accidently press *228 shutdown phone take sim out wait five minutes and then puy sim back in and reboot should auto push back to 4g prl
Sent From My Hyperdriven S4
---------- Post added at 09:08 PM ---------- Previous post was at 09:06 PM ----------
4g prls are checked for updates when phone is cut off and cut back on after a 5 min period, what I was told from verizon a year ago
Sent From My Hyperdriven S4
Click to expand...
Click to collapse
another way to get prl back is to clean flash a rom and the system automatically does a prl update on boot if other steps dont work
Sent From My Hyperdriven S4
I did this a month or two ago and lost my 4g. What I did was contact Verizon Support (via web chat but you could call them). I told them I accidentally dialed *228 and lost 4g and asked them if they would manually push a PRL update to my phone. The technician had me power off my device and when I turned it back on all was well, had 4g again.
This saved me the awkwardness of taking my phone into a store where they would see it was rooted with a custom ROM.
Sadly, found this thread too late. I dialed *228 and had to go get a new sim. At least no questions were asked at VZW.
Yeah . . I did it too lol
If you want to change your connection or update your prl's there's a code you can typee in the phone dialer to bring up a hidden menu.
In the dialer type *#*#4636#*#* and then go to phone information and scroll down and change the option to CDMA/LTE and that always works for me.
I've heard of a few people that this hasn't worked with,but other wise it has always worked for me.