Finally got my HTC EVO 4G LTE. I need a case. I got the Otterbox Defender and its going back. I am concerned with the port covers.
I really like the Ballistic and the Kraken. I can't decide. I had a Trident case for my previous phone. I like both cases. I am leaning towards the Kraken because of the dust covers.
I have 4 little kids and my EVO is our only phone. My husband calls the EVO my fifth child since its always with me. I take meticulous care of it.
My kids on the other hand, are constantly bringing me the phone, and we have a two story house. So I need a case that can withstand little hands and lots of drops.
I need to make a decision very soon, as my baby needs protection!
Thanks in advance.
HudsFamily said:
Finally got my HTC EVO 4G LTE. I need a case. I got the Otterbox Defender and its going back. I am concerned with the port covers.
I really like the Ballistic and the Kraken. I can't decide. I had a Trident case for my previous phone. I like both cases. I am leaning towards the Kraken because of the dust covers.
I have 4 little kids and my EVO is our only phone. My husband calls the EVO my fifth child since its always with me. I take meticulous care of it.
My kids on the other hand, are constantly bringing me the phone, and we have a two story house. So I need a case that can withstand little hands and lots of drops.
I need to make a decision very soon, as my baby needs protection!
Thanks in advance.
Click to expand...
Click to collapse
Haven't had a Kraken before but I don't think you could go wrong with either choice. The Ballistic that I had on my OG Evo was the most protection I have ever had on a phone. I could throw that thing up in the air twenty feet and not worry about it. I don't think anybody has had a maximum coverage case like the Hardcore that Ballistic issued for the og Evo. Trident seems to be a more artful case if you are concerned with looks. But the Ballistic is the one that I would opt for.
HudsFamily said:
Finally got my HTC EVO 4G LTE. I need a case. I got the Otterbox Defender and its going back. I am concerned with the port covers.
I really like the Ballistic and the Kraken. I can't decide. I had a Trident case for my previous phone. I like both cases. I am leaning towards the Kraken because of the dust covers.
I have 4 little kids and my EVO is our only phone. My husband calls the EVO my fifth child since its always with me. I take meticulous care of it.
My kids on the other hand, are constantly bringing me the phone, and we have a two story house. So I need a case that can withstand little hands and lots of drops.
I need to make a decision very soon, as my baby needs protection!
Thanks in advance.
Click to expand...
Click to collapse
Unfortunately they do not make a HC ballistic case for the EVO. So I got the next best thing, the ballistic sg maxx case. Not too bulky, has dust covers for the ports, reinforced silicone corners, removable screen protector (although the screen protector reduces touch sensitivity) and a belt clip. Great protection in a fairly slim package. Ebay has them for about $30
Sent from my Rooted, LazyPanda S-Off, White "Destroy Mode" Evo
I can see why you don't like the Otterbox Defender because of its thickness.
I'd go Ballistic. Seriously and figuratively.
Thanks so much. I am gonna go Ballistic. Now the tough part, what color?
Sent from my EVO using xda app-developers app
Have you considered the Cyclops instead of the Kraken? They seem to be starting to become available.
Kisakuku said:
Have you considered the Cyclops instead of the Kraken? They seem to be starting to become available.
Click to expand...
Click to collapse
I have the Cyclops case... However I wouldnt recommend it due to the op's situation. It's basically a 2 piece hard shell. I thought it was a 3 piece case but I was wrong. Also the black on every Cyclops case is glossy and the case is EASILY scratchable.
Sent from my EVO using Tapatalk 2
KL45SiiK said:
I have the Cyclops case... However I wouldnt recommend it due to the op's situation. It's basically a 2 piece hard shell. I thought it was a 3 piece case but I was wrong. Also the black on every Cyclops case is glossy and the case is EASILY scratchable.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
http://www.tridenteer.com/categories/HTC-EVO-4G-LTE/CYCLOPS-Case-for-HTC-EVO-4G-LTE/
Looks like a 3-piece case to me, unless I'm missing something.
Kisakuku said:
http://www.tridenteer.com/categories/HTC-EVO-4G-LTE/CYCLOPS-Case-for-HTC-EVO-4G-LTE/
Looks like a 3-piece case to me, unless I'm missing something.
Click to expand...
Click to collapse
It's not a three piece... I have the case and I can certainly tell u it's not a 3 piece
I also thought it was a 3 piece but I was wrong
Sent from my EVO using Tapatalk 2
I have Cyclops. It's two piece. Search for my in depth review of it in the accessories section.
I would go ballistic though.
Sent from my EVO using Tapatalk 2
Link?
newfireorange said:
I have Cyclops. It's two piece. Search for my in depth review of it in the accessories section.
I would go ballistic though.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I had a ballistic maxx on my s3. Worst effin case ive ever seen. Took it back in 1 day. That screen protector is the dumbest thing ever. Pops out rainbow haze and is not very clear.
Sent from my SPH-L710 using xda app-developers app
I have the SG for my Evo. From what I noticed the Maxx simply adds a plastic on the screen. I decided to simply get a clear screen protector rather than the plastic cover.
The reason I went with ballistic was because I had the HC case for my OG, it offered amazing protection. Unfortunately they decided to no longer make cases like that which is a shame.
I feel like I mist warn you, unless you can find a case like the old HC ones, your phone will still be vulnerable. I didn't use my phone until the case and screen protector arrived. The first day dropped it from about 4/5 feet onto the carpet by accident. I noticed it was slightly bent (it was no longer straight, rather it had a slight curve) not noticeable unless you try hard to find it.
Anyway the point is that since the phone is so thin and made of aluminium, a lot of people are reporting that the phone bends. There is a thread here somewhere on XDA with pictures.
Needless to say I'm extremely careful and don't even drive with the phone in my pocket after hearing another member mention that it bent after making a maneuver while driving. Maybe he had skinny jeans but I'd rather not take chances.
Also, my case doesn't have covers for the USB or headphone port. I don't know if they've recently added it or not.
Related
I've had my first otterbox defender ever with this evo 3d and though I love the protection, I'm beyond annoyed with the rubber outer layer stretching so it doesn't fit right. I'm already on my second outer layer (they replaced it for me 2 or 3 weeks ago and its already out of shape).
Anything else someone recommends? I don't like the ballistic case btw, looks too bulky compared to otterbox.
Sent from my PG86100 using XDA App
http://www.tridenteer.com/categories/HTC-EVO-3D/
Here are some cases that may be fit for your needs
Thanks, this does look like what I'm looking for. Do you own 1? Any stretching issues like I'm experiencing?
gk1984 said:
Thanks, this does look like what I'm looking for. Do you own 1? Any stretching issues like I'm experiencing?
Click to expand...
Click to collapse
no i plan on trying one out tho. i had one for the evo 4g, and never had problems with stretching.
I'd like to try the Kraken. If you get it, would you mind providing a little review? I emailed Otterbox about the replacement even stretching and see what they say before I make any additional purchases. Amazon has the Kraken for about $10 cheaper btw - just looked. but they only have a handful left... I hate when they do that, makes you feel like its now or never.
gk1984 said:
I'd like to try the Kraken. If you get it, would you mind providing a little review? I emailed Otterbox about the replacement even stretching and see what they say before I make any additional purchases. Amazon has the Kraken for about $10 cheaper btw - just looked. but they only have a handful left... I hate when they do that, makes you feel like its now or never.
Click to expand...
Click to collapse
I've heard some bad reviews on the Kraken II for the Evo 3D. I decided on ordering the Cyclops II for the Evo 3D, I've heard nothing but good things. Ballistic Cases are another great option.
firemedic1343 said:
I've heard some bad reviews on the Kraken II for the Evo 3D. I decided on ordering the Cyclops II for the Evo 3D, I've heard nothing but good things. Ballistic Cases are another great option.
Click to expand...
Click to collapse
Thanks. I have been doing some research on the Kraken II too and getting more and more discouraged. I'll look at the Cyclops II and maybe Ballistic.
Otterbox offered to send me 2 replacements this time. I also asked why it is doing this and how I can prevent/minimize it but they ignored that part. I suppose I'll take the replacements, but I don't think I'm going to stick with Otterbox because of this issue. Just still don't know what else to get.
gk1984 said:
I've had my first otterbox defender ever with this evo 3d and though I love the protection, I'm beyond annoyed with the rubber outer layer stretching so it doesn't fit right. I'm already on my second outer layer (they replaced it for me 2 or 3 weeks ago and its already out of shape).
Anything else someone recommends? I don't like the ballistic case btw, looks too bulky compared to otterbox.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
I've had both, and I didn't feel like there was any more bulk to the Ballistic HC than the Otterbox.
mkampy said:
I've had both, and I didn't feel like there was any more bulk to the Ballistic HC than the Otterbox.
Click to expand...
Click to collapse
How about warping or stretching? Solid there?
Seidio's is nice. No stretching. I have extended battery so its bulky.
Sent from my PG86100 using xda premium
Thanks. which seidio? I'm eyeing the Active with kickstand. I think I did read they they were pretty easily warped by the camera button, but I might have that mistaken with case mate.
EDIT: Thanks for the help, I just went ahead and ordered a seidio.
heres a case that i recently purchased and absolutely love. not as protective at otterboxes or ballistic cases but it survived many nightmarish drops and came out just fine, not a nick or scratch on the case even.the kickstand design is very solid and its made of the same reinforced plastic polymer as otters and ballistic, and it incorporates a hard tpu skin. overall a futuristic design for a futuristic looking phone lol. also a great price
http://www.amazon.com/gp/product/B0...&pf_rd_t=101&pf_rd_p=470938631&pf_rd_i=507846
Still using the otterbox defender, never had a problem with the silicone stretching. Only thing i can see doing that is constantly taking the rubber off and on.
I don't remove the rubber layer at all. But I just showed my brother yesterday the problem and asked if he had that issue. He also has the e3d and otterbox defender. He doesn't at all. But we compared his outer layer to mine and his is thicker. I don't know why ours are different.
Sent from my PG86100 using XDA App
gk1984 said:
I don't remove the rubber layer at all. But I just showed my brother yesterday the problem and asked if he had that issue. He also has the e3d and otterbox defender. He doesn't at all. But we compared his outer layer to mine and his is thicker. I don't know why ours are different.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
The "silicone" mixture can be different, that's why they ask for the vendor code when you get them to send you a new one, I would think its very easy to revise the ingrediants to make it fit better or worse, I think putting in my pocket and taking it out stretched out the sides and made it fit a lil lose compared to a new one, my replacement defender fit totally better than my first one, however the same problem did occur over time, again... So I'm with you in the hunt to find that perfect case,
Shot from my shooter in 3D
cleanrom2.8
Well, I'm liking this Seidio Active kickstand case I ordered so far. Doesn't feel quite as durable as otterbox, but enough protection for me. The silicone feel thinner and softer than my otterbox's too so we'll see. At least it's mostly the inner layer that's silicone with the outer hard plastic so maybe it will be ok.
Sent from my PG86100 using XDA App
Ballistic HC case, love it, even has a kickstand!
iAmInsaine22 said:
Ballistic HC case, love it, even has a kickstand!
Click to expand...
Click to collapse
I been rockin the hc black/black case since wedneseday. So far nothin but positive feelings. I posted a thread with pics of it next to the defender
Sent from my PG86100 using XDA App
Bumping this thread back up. I had the same problem with my Otterbox Commuter, where the silicon was stretching out too. They even sent me a replacement and the same thing still happened. I got the pink/white 'strength' version if it made a difference. I never took the silicon off that often and the phone is carried in my purse mostly. So I didn't understand how the silicon can stretch out like that.
Thinking of emailing them to let them know of the issue, but I don't really want any more phone cases from them. I ended up getting a Casemate slim case which I love. I also got the Casemate equiv of the Commuter and the silicon they use is much stiffer and fits a lot snugger.
OP you mentioned they offered you 2 replacements. Is it replacements for the same phone case? Or cases for other devices?
http://www.otterbox.com/HTC-Rezound...98100_color=20&start=2&cgid=htc-rezound-cases
Anyone have it yet?
I have the defender and love it!! VZW threw it in when I picked up my Rezound. Way nicer than my wifes on her iphone. Rubber stays put, covers for the ports and nice rounded edges.
Chris
Did they have the commuter in stock in the store?
never even asked
Chris
Do it fit the extended battery also
Sent from my ADR6400L using XDA App
No the extended battery won't fit if it is anything like the Otterbox on my Desire
I ordered one last night directory from Otterbox. I had one on my DI and loved it. I'll post pics when it comes in. It looks pretty nice in the pictures. The cases Verizon had sucked. I got a gel case for temporary. Guy said I had 14 days to return it as long as it wasn’t all beat up. Only Otterbox case Verizon had was the defender. And that's just too much case IMHO.
Sent from my ADR6425LVW using Tapatalk
I am not sure what to do. I can either order an otterbox and hope it comes before thanksgiving and have it delivered to my house or I can have it delivered to me at school but I will be almost a week without a case then
I saw that Verizon had the shell holster case say it fits the standard and extended battery
Sent from my ADR6400L using XDA App
con247 said:
Did they have the commuter in stock in the store?
Click to expand...
Click to collapse
Just got off the phone with V got an early upgrade to the Rezound and the fellow asked if I needed to order a case. They only had the Ottterbox Defender. I had already ordered a Commutter direct from Otterbox. The two shall meet on Monday and become one.
Not sure if it will be delivered by wednesday or the friday after thanksgiving. I am not sure if I should ship it to school or my house where I will be next week.
Also just ordered mine. Mad they dont have faster shipping options. Defender is way to large for me lol. (That's wut she said) but I ordered the commuter yesterday so i should have it early next week. Its looks good IMO. Hopefully it feels just as good..
I also hope maybe it will have a cover for the camera. As the battery plate doesn't... Scared my lenses is gonna scratch and give me nexus quality pictures :-(
Sent from my ADR6425LVW using Tapatalk
I picked up the defender yesterday, and actually really like it. I generally get the commuter as well, but it has a great feel to it. It makes the buttons MUCH easier to use, which is a huge plus in my opinion. It also offers a very good screen protector that doesn't take away from the screen clarity like the protectors VZW sells.
We will have to see how long I can do with the rubber picking up lint (which it does, quite a bit actually)...but I have to say I like it better than all the other cases I've tried at my local Verizon store.
I have the otterbox commuter series for my rezound. Love it. They've turned me into a serious fanboi. Fit is absolutely flawless. The hard plastic shell is great too. I'm not using the screen protector.
If you're on the fence regarding this case...don't be.
Best phone accessory I've owned.
shmio said:
I have the otterbox commuter series for my rezound. Love it. They've turned me into a serious fanboi. Fit is absolutely flawless. The hard plastic shell is great too. I'm not using the screen protector.
If you're on the fence regarding this case...don't be.
Best phone accessory I've owned.
Click to expand...
Click to collapse
Otterbox has been my #1 for a long time. All their cases are great. And their warranty is too. Does the commuter have any kind of cover for the camera lense? Or is it thick enough to not be an issue?
Sent from my ADR6425LVW using Tapatalk
platinumrims said:
Otterbox has been my #1 for a long time. All their cases are great. And their warranty is too. Does the commuter have any kind of cover for the camera lense? Or is it thick enough to not be an issue?
Sent from my ADR6425LVW using Tapatalk
Click to expand...
Click to collapse
Nothing physically over the lens. However it does offset the lens roughly a 1/16th of an inch. Enough so you can slide it across a table without worry. It's the same with the screen. I don't use the included screen protector so that offset is key.
everyone of my devices has a otterbox defender, the best cases i've ever used
Dammit there out of stock. Figures much LOL
Sent from my ADR6425LVW using Tapatalk
Yea I noticed that my delivery date changed from the 22nd to the 25th... PisseD. Was gonna cancel. But I can't find them anywhere else that ships faster. So I guess ill wait lol :-\
Sent from my ADR6425LVW using Tapatalk
Has anyone tried the Commuter? I think the defender would just be more than I need. My only major problem with this phone is the WORTHLESS flush mounter buttons. I always almost drop my phone trying to use them. I know at least one person has said that the Defender makes the buttons much easier to use, can anyone attest to this being the same on the Commuter? From the picture they look nice and raised like on the Defender, but I want to be sure, as right now whatever case I get will be based largely on making the buttons easier to press.
Also, how does that membrane on the Defender work? Is it just a sheet of plastic connected to the case rather than stuck to the screen? Wouldn't dust and/or moisture get trapped under there?
Looking to get a new case and was hoping to hear some opinions from those of you with cases or whom have had a chance to try a few out. I currently have the D30 flex protective cover from T-mobile (black and for sale if anyone wants it 10$ no drops). I really like the D30 material and have enjoyed their past products but my girlfriend's phone just broke (not using D30, but it got me thinking). Given that the Amaze is a heavier phone and the glass sticks out so much I feel I should step up the protection on this phone to prevent knicks on the bottom two corners that could potentially cause cracks. I've looked around at a few cases and have narrowed it down to a few.
-Trident Kraken AMS Case w/ Holster for HTC Amaze 4G, Blue
-Ballistic Case for HTC Amaze 4G / Ruby
-HTC Amaze 4G Tough Cases
(If I'm missing some amazing case let me know)
Price really isn't a factor, they are relatively the same price, and in the end it is a good idea to get something that will work and last in the sense of protecting an investment.
Only issues I have heard of but have not found anything concrete to go off of have been:
-Covering of rear holes (Receptiom, WiFi, noise cancellation; although I don't think I'd mind making them myself if I decided strongly on a case without them)
-Inaccurate fitment (as in the hard part of the case falling off easily or likely on impact)
-Thickness leading to lack of efficiency (no more pocketing, bricklike, etc)
-Magical Lint magnets (need I say more?_
Give me your thoughts and opinions if you'd like, or make a "case" for a case.
Thanks in advance!
Bump Bump Bump
I'm going to go ahead and make my 1st post. This is a good thread. I think you have a general idea of the best case for the Amaze already. You want to make a smart purchase, and not buy something only to find out next week what you really wanted is just posted. My advice would be make the best decision based on the facts you have already stated; keep us up to date, let us know the pros and cons. Then if anyone else makes a thread like this we can always link them to this post. As it is already quite informative
Sent from my HTC_Amaze_4G using XDA App
tpu case is the best for me... for my sensation and in a week , to my amaze as well..
Sent from my HTC Sensation XE with Beats Audio using xda premium
I have a Trident Aegis case for my Amaze and let me say, it kicks ass. The screen protector that comes with it really blows but I just put on a Invisible Shield instead. Even though the case isn't the most protective one that Trident produces, my phone feels really secure in it. Its not much of a lint magnet, but it attracts cat hair like none other lol It has covers for the charge port and headphone jack. The only problem is that if you don't have any finger nails, the charge port cover is hard as hell to get out. It fits in a pocket decently as long as you're not wearing tight ass jeans. I feel like my phone is rather protected and I'm rather impressed with it. I highly recommend it.
I got mine from eBay (shipped from California) and it is cheap and good quality. The case case and screen protectors (a few of them) are just a few bucks.
Just my opinion but I hope it helps.
I gut the Trident kracken in rd d silicone.. silicone kicks ass the hard plastic fits good..
no lint problems.
Needed to drill the ambient light and noise holes myself for a big improvement...
Also the belt clip thing is good but I don't like it over the screen face...if it breaks that will be some nasty jagged plastic directly jamming into my touch screen..
I am very confident my phone will be safe in this case on my construction job sites
I wish it had a hinged door like screen cover...I had that years ago on a compaq PDA... Worked great as a stand too
Sent from my HTC Amaze 4G using xda premium
I have tmobiles D3O impact protection case. I've dropped my phone a few times now and its still in perfect condition. It's also not very bulky either.
Sent from my HTC_Amaze_4G using xda premium
I really like my body glove case w/ kickstand. If not, the Amzer TPU cases is high quality case too. If you're looking to get a TPU case, look for Amzer cases...you won't regret it.
I bought this TPU case on eBay when I first bought the phone. I love it and it is cheap. It is really durable for the phone. Best $2.50 investment I ever made lol
Edited by Moderator: [ebay link removed]
Posting links to external sites such as ebay and craigslist is prohibited. Please take a few minutes to read the rules. Understanding them will avoid problems in the future.
Loving my Ballastic case! Thing makes it like a tank, but I am fine with that. I know I will be okay if I drop it. Best 20 bucks I have spent for this phone!
Sent from my HTC_Amaze_4G using Tapatalk
what do you guys think of this?
http://www.daydeal.com/product.php?productid=64424
Got The Trident Kraken AMS Case w/ Holster (Red)
As you can see in The Pictures Your Phone will look like a heavyweight worry-free drop device.. it has a nice kick stand which will easily break for overtime used but perfect angle as well when in viewing/watching mode..
Will do further review if ever..
am i the only man that swears otterbox kick all the other cases into obscurity? Bit more pricey but hell you have a £400+ device so whats a few brown backs extra to keep it proteced, plus it looks great!
gumshield said:
am i the only man that swears otterbox kick all the other cases into obscurity? Bit more pricey but hell you have a £400+ device so whats a few brown backs extra to keep it proteced, plus it looks great!
Click to expand...
Click to collapse
I think otterbox for the amaze will not be made or they are planning to due to the fact that the amaze is not a all rounded carrier phones, i think Telus and T-Mobile only carry them as for now and rumor has that the Amaze 4g from T-Mobile will be pulled out because it is not selling well on T-Mobile Everyone get's the GS2 because of the bigger screen.. And as i ask one of the sales rep's in T-Mobile they will be releasing a Samsung Galaxy Note Next Year.. hope it's true or she is not shtn me...
honestly i woldnt even think about buying the kraken since it has clips and would brake whenever you drop it. i would really recommend you to get the aegis trident case since in my opinion is more solid than the kraken.
trident kraken
Ive had the trident aegis and the ballistic sg series and the trident kraken. The trident kraken is the best one I've found so far....as far as a case that protects everything...that's easy they don't exist lol. The kraken has dust covers and a nice fit and a belt clip..but the screen protector sucks..no protection for the camera...the dust plugs are a pain to get out...and the belt clip protects nothing when attached (but the back does face out) it covers about one sixth of the phone and is a pain to get on and off.....but i think its the best option as I think t Mobile pissed someone off or something bc no one is making a supremely awesome case for the amaze.. I've looked for sometime now...
tylr0drdn said:
Ive had the trident aegis and the ballistic sg series and the trident kraken. The trident kraken is the best one I've found so far....as far as a case that protects everything...that's easy they don't exist lol. The kraken has dust covers and a nice fit and a belt clip..but the screen protector sucks..no protection for the camera...the dust plugs are a pain to get out...and the belt clip protects nothing when attached (but the back does face out) it covers about one sixth of the phone and is a pain to get on and off.....but i think its the best option as I think t Mobile pissed someone off or something bc no one is making a supremely awesome case for the amaze.. I've looked for sometime now...
Click to expand...
Click to collapse
So did you not like the Ballistic? I think that it would have great protection and not make the phone as bulky as the Kraken. And it already has the holes cut around the camera.
Getting the ballistic case should arrive next week. Will post back when I get it.
Initial impressions are that it looks like it can survive a fall and has all the ports covered and looks nice. Also it has the 3 holes cut out from the back around the camera that the trident doesn't have. Doesn't seem too bulky either.
I'm awaiting the arrival of my evo lte and am debating on if a case is needed or not. It sounds like it's rock solid, and the screen is gorilla glass, so is something really that needed. Yes, I saw the one post where someone actually did crack the screen, so I understand it can happen, but is it really that likely?
The case I am considering is the basic TPU case that is cropping up on here. My biggest concern is that I want it as slim as possible, and even though the case is supposed to be about as slim as can be, it still adds some bulk.
Anyway, all thoughts are appreciated. Thank you in advance.
I think i may get one because this thing is so nice Im scared handling it.
I wasn't planning on using a case but it's so thin I need one to be able to hold onto the damn thing. I have small hands, so you'd think thinner would be better, but no.
Sent from my EVO using xda premium
Despite my last 2 EVO phones being fine without a case the back of the Lte can be too smooth if your hands are dry
Sent from my EVO using Tapatalk 2
I normally don't get cases or screen protectors. My EVO 4G went a year and a half without a scratch on the screen or a chip in the body.
The SGSII lasted less than six months before the same result.
EVO LTE is in a Platinum case (which sucks) with a Zagg HD screen protector.
Sent from my EVO using xda premium
good luck when that phone falls
One additional idea I had was to get some kind of sleeve to put it in when not in use. I think it may also come down to how it feels in my hand once I have it.
I've never really kept a case on any of my phones. I'm very good at handling them (except when my wife klutzes it up). I just know that my hands aren't the biggest, and with these phones getting bigger every year, adding a case just makes it worse.
And... I have TEP, and have always kept it.
Using a case is like wearing a condom. Sure it feels better without it but you're taking a chance. Some protection is better then no protection.
shook187 said:
Using a case is like wearing a condom. Sure it feels better without it but you're taking a chance. Some protection is better then no protection.
Click to expand...
Click to collapse
+1...I took the case off of my OG Evo and now it is always saying how it burns whent it pees...
Get a case!!!
no case! no screen protector! no insurance!!!
shook187 said:
Using a case is like wearing a condom. Sure it feels better without it but you're taking a chance. Some protection is better then no protection.
Click to expand...
Click to collapse
Nice analogy.... The phone is so thin to the point it feels slippery. I always use otterbox cases for all my phones. I'm clumsy.
I like my phones like my women, naked! Sanding the top cover makes it a bit more grippy. When I'm drunk in the club and holding the phone over the toilet, I make sure the kickstand is out and between my index and ring finger so it doesn't drop.
First phone I actually bought a case for.
Someone needs to make a back replacement piece that replaces the top plastic half to match the bottom metal half.
tybo31316 said:
Nice analogy.... The phone is so thin to the point it feels slippery. I always use otterbox cases for all my phones. I'm clumsy.
Click to expand...
Click to collapse
I had an otterbox case on my OG EVO and for the many time ive dropped it not a single chip or scratch... the second I took it off and dropped it I broke something under the glass (not the glass) and the screen is completely unusable... the second i got my free case from sprint i slapped it on the LTE and im waiting for the new otterbox from amazon so i can put that on it... i drop stuff too much to risk it lol... go with a case because you never know what around the next corner
I bought the Platinum Series case and I like it a lot. Very comparable to the OtterBox case but about $14 cheaper, and comes with a clip. I found it at Best Buy. I would post a link, but I can't yet. Just search it out on their site.
I read that Sprint was sending out a free case with every EVO LTE, to make amends for the whole customs situation. Anyone receive one of those or know if it only applies to those who ordered direct from Sprint?
Since I opted out of the insurance, I'll be putting a case on mine. My OG EVO did quite well with the official HTC TPU case, so I'm considering this TPU case by Diztronic.
I'm also considering getting a screen protector, but not sure how necessary it'd be with the harder Gorilla glass. I'd be primarily using it to protect against scratches from keys, change, etc that might end up in my pocket.
---------- Post added at 04:12 PM ---------- Previous post was at 04:07 PM ----------
DanBergundy said:
Someone needs to make a back replacement piece that replaces the top plastic half to match the bottom metal half.
Click to expand...
Click to collapse
You can actually sand the top half to match the bottom. I might try this, though it's not that noticeable either way, as my case will cover it.
See here for instructions on sanding.
No, put at least a tpu case on it. It's super slim, hardly adds any bulk, and gives you grip on the phone.
I probably won't put a screen protector on till my first scratch but you got to remember sand or even dust can still scratch the gorilla glass. So be careful at the beach all you summer beach goers.
Sent from my E4GLTE on XDA.
mrnamster said:
When I'm drunk in the club and holding the phone over the toilet
Click to expand...
Click to collapse
??????? Not sure which confuses me more, you holding the phone over the toilet or having a system in place to avoid dropping it in the toilet.
ok i got the otter box defender case june 2 the day i got the phone.. and about 1 month later the lil rubber flapthat goes over the charge port just fell off from using it so much it wore down and broke rite off.. so i call otter box explain to them my issue and the sent me a new outter layer.. i have had this case for about 2 weeks and i can see that its deff gonna happen again.. which sucks cause i dont want to call again.. is this a problem for anyone else?? sh*t i mite just leave the dam thing off once it falls off again
It's a know problem. There is another threat here that talks about it. Works case scenario you can call again and have them send another one.
Sent from my HTC Evo LTE powered by Meanrom
I have noticed the flap looking kind of weak on mine too. I'm switching to the Commuter case I ordered as soon as it gets here.
i want to get a thinner case but i need a belt clip.. anyone kno of a good case thats thinner than the defender but has a belt clip?
I had this very issue. I called otterbox and explained the problem and told them I purchased it at best buy but that I did not have the box or receipt. They said no problem and sent me an entire new case. Plus I kinda sorta maybe told them I had the blue version so they sent me that one. Now I have both the blue and the black and I mix and match the pieces. The flap is still broken but it doesn't bother me. Their customer service is awesome.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Can feel the flap on the usb port getting weaker by the day, debating whether I care or if I'm gonna get another case. Really liked Ballistic's cases on the O.G. leaning towards trying their SG case.
evo401 said:
i want to get a thinner case but i need a belt clip.. anyone kno of a good case thats thinner than the defender but has a belt clip?
Click to expand...
Click to collapse
I have the commuter case, and the seidio active holster. It's like they were made for each other. Two separate purchases but it's a thinner case.
"We're coming from a pure power source"
I've had the same prob with the flaps and also I noticed the right next to the hole that holds the phone in the holster wears too.... Even the rubber cover as a whole starts to get lose after a while. I just picked up a commuter case today. My phone is a lot slimmer now and I realize again how beautiful the screen is by not having the built in screen protector.
My charger port flap broke off of one case and the black lip that snaps your phone into the case broke off also. I'm now on my 3rd case. The warranty is only a year so I'll just keep getting new cases until the warranty ends and maybe go with the ballistic SG Maxx next.
SENT FROM MY EVO 4G LTE!!! (w/no LTE)
I started with a defender and hated that the front screen made it hard for me to negotiate the top part of my screen. I did love the toughness but these day I have been using the commuter series on this phone and it has been awesome.
Sent from my EVO using Tapatalk 2
cocoasmooth said:
I started with a defender and hated that the front screen made it hard for me to negotiate the top part of my screen. I did love the toughness but these day I have been using the commuter series on this phone and it has been awesome.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I would recommend popping off the screen protector it comes with and applying your own. EBay gets you 6 of them for like less than $2. Or you can get the Zagg regular or HD. This will avoid the color distortions (rainbow circles) and in the sun light glare.
I've been doing this to all my Otterbox's and that's how I've survived. But I am thinking of switching over to the Trident Case's - Kraken AMS or Cyclops.
I have the commuter case and have had no problems..... But otter will send you a new one...
Sent from my EVO using xda premium
tybo31316 said:
I've had the same prob with the flaps and also I noticed the right next to the hole that holds the phone in the holster wears too.... Even the rubber cover as a whole starts to get lose after a while. I just picked up a commuter case today. My phone is a lot slimmer now and I realize again how beautiful the screen is by not having the built in screen protector.
Click to expand...
Click to collapse
I am now seeing this problem too. The whole case seems to be getting looser. So much so that it barely even stays attached to the top of the frame at the top of the phone now.
no problems here im happy with mine
I had the same problem to and outterbox sent me a new one and I'm not to pleased with the case cause of the rubber part that the phone holder attached too the rubber part wares down pretty fast.
Sent from my EVO using Tapatalk 2
sully9292 said:
I had the same problem to and outterbox sent me a new one and I'm not to pleased with the case cause of the rubber part that the phone holder attached too the rubber part wares down pretty fast.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
The silicone (rubber) housing has been an issue for all otterboxes not just the lte for my og i went thru 4 of them in 6 months the 3d like 6 of them and im getting my third in the mail for the lte and i got it the day they were shipped to stores for preorder release. Otterboxes offer amazing protection and customer service thats why ill stick with them. That and the fact they dont keep track of the 1 year thing lol
Sent from the depths of hell
This really sucks. I am about to get my defender case soon for my evo 4g lte. I've got one for the Sgs3 and so far it's been good.
Happened to me.also. I am.on.my second warranty replacement. I am actually pretty irritated and will be trying to return the case.
Sent from my EVO using Tapatalk 2
I dont see it as a reason to return or not buy otterboxes now if theyd stop replacing them or started charging a fee for replacements like zagg does then id start looking else where but in all aspects of the case im quite pleased with it...on a side note they probably didnt design the case with power users/rooters and devs in mind. Im sure with normal daily usage the case would hold up and withstand anything you threw at it. And on another side note i threw my 3d at the wall a few months back with the defender on it and absolutely nothing happened to the case but i did shatter the digitizer and lcd along with completely bending the metal housing of it. So the case itself will hold up just hope the impact of the hit isnt hard enough to break what its protecting lol.
Sent from the depths of hell