Well, I've got the bootloop problem while I was trying to root my Xperia Mini pro SK17i (I've installed a kernel and in the tutorial they said it's normal if the phone doesn't boot) and now I'm not able to JUST flash the files (at least to recover ). I'd say this because the device connect and disconnet infinite times.
Then, I'm really scared because I trusted and did the steps of this topic correctly I think I'm in a hardbrick situation.
Wether the phone at least stay connected I would be able to unbrick it.
But, I can't unbrick this phone,
COULD SOMEONE HELP ME? I don't know what I should do.
juninhoxps said:
Well, I've got the bootloop problem while I was trying to root my Xperia Mini pro SK17i (I've installed a kernel and in the tutorial they said it's normal if the phone doesn't boot) and now I'm not able to JUST flash the files (at least to recover ). I'd say this because the device connect and disconnet infinite times.
Then, I'm really scared because I trusted and did the steps of this topic correctly I think I'm in a hardbrick situation.
Wether the phone at least stay connected I would be able to unbrick it.
But, I can't unbrick this phone,
COULD SOMEONE HELP ME? I don't know what I should do.
Click to expand...
Click to collapse
ok, so u cannot flash back to stock with flashtool?
concerneth iconfa
juninhoxps said:
Well, I've got the bootloop problem while I was trying to root my Xperia Mini pro SK17i (I've installed a kernel and in the tutorial they said it's normal if the phone doesn't boot) and now I'm not able to JUST flash the files (at least to recover ). I'd say this because the device connect and disconnet infinite times.
Then, I'm really scared because I trusted and did the steps of this topic correctly I think I'm in a hardbrick situation.
Wether the phone at least stay connected I would be able to unbrick it.
But, I can't unbrick this phone,
COULD SOMEONE HELP ME? I don't know what I should do.
Click to expand...
Click to collapse
can you connect into fastboot or flashmode?!
Looks like someone got a crappy cable.
Try replacing it, my old cable used to crap on me too.
An improper Kernel or even a bootloop should not prevent you from getting into fastboot mode and reflashing.. Pixelado might be right..It could be a faulty cable or a loose connection.. try another cable or another computer maybe to check..
To better understand, tell us, did you follow that root guide that says:
Downgrade kernel to a 4.0.3 one -> use Doomlord exploit, re-upgrade to stock 4.0.4 kernel?
juninhoxps said:
Well, I've got the bootloop problem while I was trying to root my Xperia Mini pro SK17i (I've installed a kernel and in the tutorial they said it's normal if the phone doesn't boot) and now I'm not able to JUST flash the files (at least to recover ). I'd say this because the device connect and disconnet infinite times.
Then, I'm really scared because I trusted and did the steps of this topic correctly I think I'm in a hardbrick situation.
Wether the phone at least stay connected I would be able to unbrick it.
But, I can't unbrick this phone,
COULD SOMEONE HELP ME? I don't know what I should do.
Click to expand...
Click to collapse
Download your ROM Stock FTF and Flash on Modo Flashboot with Flashtools.
I follow this method to root my phone.. Its simple and easy to follow..
http://forum.xda-developers.com/showthread.php?t=1701357
if anything goes wrong just go to flashmode(pressing powerbutton+vol key down).. and reflash the stock ftf file..
it doesn't matter your phone get started or not you can still go to the flashmode .. :laugh:
juninhoxps said:
Well, I've got the bootloop problem while I was trying to root my Xperia Mini pro SK17i (I've installed a kernel and in the tutorial they said it's normal if the phone doesn't boot) and now I'm not able to JUST flash the files (at least to recover ). I'd say this because the device connect and disconnet infinite times.
Then, I'm really scared because I trusted and did the steps of this topic correctly I think I'm in a hardbrick situation.
Wether the phone at least stay connected I would be able to unbrick it.
But, I can't unbrick this phone,
COULD SOMEONE HELP ME? I don't know what I should do.
Click to expand...
Click to collapse
Hmmmmm...perhaps you might give us more info so everybody can help you out.....
Atleaset give us a proper info like....
1.What version is your XMP (Gingerbread or ICS) & it baseband........
2.Did you unlock your phone bootloader or not.......
3.What kernel did you flash into your phone.....
4.Which tutorial did you use to flash/root your phone........
Look in this: http://forum.xda-developers.com/showthread.php?t=1695514 thread to root your phone with ics
If you want gingerbread back first, just check out the rooting guide in my signature
Sent from my SK17i using xda app-developers app
Related
Hey GUYS please HELP ME
I have followed the Guide to root the xperia x10 in this forrum. So here is what happened. After completing step 3, it all went fine but then the thread says I have to install the Market fix for X10i users. After done that, my phone restart and it won't let me to go inside. It has a weird picture.
Anyway, can you guys please tell me to unroot or whatever to gain the access to the phone again? I tried the phone repair from PC suit to flash the x10 but it doesn't work anymore.
PLEASE HELP ME ...
we have the same problem mate pls. help us.....
c'mon xDA Developers!!!!!!!!!!! My phone is now relying on you guys
Reflash your phone using the flash unbrick tool and redo rooting steps
Just re-root from step 1 and your fone will be fine.
The PC com cannot work anymore cuz your region does not support FW update higher than 023. If you finish step 2, your fone FW ver is 023 already.
NO it's not that Simple. If I was able to flash back my device then I wouldn't post this thread. Please look at my pictures that were attached. In the CMD window, it says Unable to open channel, Getlasterror= 0"
I think there is no way to get inside the phone ....
Check if i did anything wrong
Ok HERE Is what I did (Refer to the pictures)
kelvin103 said:
NO it's not that Simple. If I was able to flash back my device then I wouldn't post this thread. Please look at my pictures that were attached. In the CMD window, it says Unable to open channel, Getlasterror= 0"
I think there is no way to get inside the phone ....
Click to expand...
Click to collapse
Why you just not simply use the Forum search ? That error has been described numerous Times. Also the Solution has been posted many , many Times.
1st i had the problem..but the 2nd time i did all fine,u hv to reflash the 1st root..and do it again..try.
Sent from my X10i using XDA App
Higgins12 said:
Why you just not simply use the Forum search ? That error has been described numerous Times. Also the Solution has been posted many , many Times.
Click to expand...
Click to collapse
Why Can't u stop all the useless posts? If I was able to find them then I wouldn't post this thread here. Im sure that U just say that but in fact u don't know anything mate
Please re-check your device ID and make sure its right in your DeviceID.txt file. If it is wrong then you will get a device not found error. Remember it will change everytime you change USB slots.
Check your Device Id if you have more than one!LOL Fate was faster!
Have you tried it with Omnius?
THE PROBLEM IS NOT FROM ANY OF THAT... AFTER RESTARTING MY PC and UNINSTALL THE PC COM and PC SUITE... IT WORKS !!!
Thanks guys!! Helping me alot...
mine is going back to 023 now...the solution is i rooted my phone on my other computer and the device id is completely different when i first rooted my phone on my other computer.....thanks for the help mates....
recovery
Hi,
just wanted to let you know it turned me onto a path that helped me get my " Stuck on Sony Ericsson" screen: i work with Linux and i had to use PC compnion to restore the phone which worked!!!!!!!! now reinstalling another custom rom.........the Dark Edition HD is the one that (nearly) bricked mine so , no, not that one
thanks again.........
Reflash with Seus? Pc companion
Just a Question to increase my knowledge. Why do people use that old methods to root x10's ? Why not use simple ON CLICK in app called Flashtool ? I've used that method many times and it's fastest, safest possible way to root, flash ROM's etc ? am I missing something ?
This thread should be in the q&a section
Sent from my X10 using xda premium
For that screen, I'd recommend either using seus to repair your phone first, then if that didn't work, try downloading the flash tool and DoomLord's prerooted recovery image or stock firmware in the. Ftf file type and flashing those via flash tool. That should help somewhat but if you can't get anything after that then take it back to the store. the moment you can get it to boot to the kernel screen, you're fine since you can just wipe and install a new ROM. Best of luck! Tell me how it turns out!! :-D
Galcactus
Sent from my X10S using XDA
WHY YOU GUYS REPLYING TO A THREAD THAT IS NEARLY 2 YEARS OLD
CLOSED.
[Q] [Really Need Help] Xperia Neo would not start, only shows "sony ericsson" :(
Hi guys, I am new to this forum and a new smartphone user.
Last night I was updating my phone through PC companion, but the software dies half way for some unknown reason. Since then I could not turn on my phone.. It will only vibrates, shows "Sony Ericsson", and then an image of yellow triangle with an exclamation mark shows up, then it is turned off again. I tried charging, restarting my pc companion software to try to update my phone, but none of them work.
I saw some threads here and it seems that there are possible solutions, but because the terminology is quite strange to me I could not fully understand what I have to do What is a flashtool and SEUS? I tried to search them up on the net but the downloads seem to be unavailable?? I must be missing something here.
If anyone can help me with simple terminology I will really really appreciate it.. Thanks a lot!
Your phone's boot loader unlocked or not & if yes what method?(s1tool,official SE or setool2 paid) ? Here's a good tutorial about flashtool.
lilbunnyf said:
Hi guys, I am new to this forum and a new smartphone user.
Last night I was updating my phone through PC companion, but the software dies half way for some unknown reason. Since then I could not turn on my phone.. It will only vibrates, shows "Sony Ericsson", and then an image of yellow triangle with an exclamation mark shows up, then it is turned off again. I tried charging, restarting my pc companion software to try to update my phone, but none of them work.
I saw some threads here and it seems that there are possible solutions, but because the terminology is quite strange to me I could not fully understand what I have to do What is a flashtool and SEUS? I tried to search them up on the net but the downloads seem to be unavailable?? I must be missing something here.
If anyone can help me with simple terminology I will really really appreciate it.. Thanks a lot!
Click to expand...
Click to collapse
Hi,
This is my suggestion:
first download FlashTool_0.2.9.1_FOTAUnbrick
http://forum.xda-developers.com/showthread.php?t=1126358
Follow instructions (if u familiar with updating with sony ericsson pc companion, this u can do)
Simple, start FlashTool_0.2.9.1_FOTAUnbrick, click flash. Choose loader.sin on the right. Then click OK,
Turn of phone, hold in back button while connect phone with usb cable.
See its flashing, wait til its done, unplug phone,. try to boot up phone.
I am also a newbie, but this worked for me
pls give me a link to download SEUS, for xperia neo pls. pls help I am having the same problem pls help,
emailprashanthvg said:
pls give me a link to download SEUS, for xperia neo pls. pls help I am having the same problem pls help,
Click to expand...
Click to collapse
Try: http://dl-www.sonyericsson.com/cws/download/1/110/61/1323075336/Update_Service_Setup-2.11.12.5.exe
Guys dont panic if you bricked your phone go through the Xperia neo Forums and im sure you can unbrick your phone i have bricked my phone 2 times and i was able to unbrick !
http://forum.xda-developers.com/show....php?t=1126358 ...even i suggest this page because this is were i was able to unbrick my phone successfully !
Thank you guys! My phone is finally working again!
lilbunnyf said:
Thank you guys! My phone is finally working again!
Click to expand...
Click to collapse
Good! Enjoy your neo!
abhinav333 said:
Guys dont panic if you bricked your phone go through the Xperia neo Forums and im sure you can unbrick your phone i have bricked my phone 2 times and i was able to unbrick !
http://forum.xda-developers.com/show....php?t=1126358 ...even i suggest this page because this is were i was able to unbrick my phone successfully !
Click to expand...
Click to collapse
I don't think link is right mate, 404 page not found
Anyway @lilbunnyf if your phones boot loader is unlocked using s1tool method do not use seus or pc companion.As I read in forum this can brick your phone.Try flashtool.If you got a locked boot loader or patched one with setool2 then you can use pc companion(this thing saved my phone like 5-6 times now after kinda bricking it with roms kudos se for this xD)
lilbunnyf said:
Thank you guys! My phone is finally working again!
Click to expand...
Click to collapse
oh xD didn't saw this,Good
lilbunnyf said:
Thank you guys! My phone is finally working again!
Click to expand...
Click to collapse
Tell us how did you unbrick it, maybe in future someone will have the same problem as you
dioggo92 said:
Tell us how did you unbrick it, maybe in future someone will have the same problem as you
Click to expand...
Click to collapse
LOL so your are ready to brick your phone !
dioggo92 said:
Tell us how did you unbrick it, maybe in future someone will have the same problem as you
Click to expand...
Click to collapse
Most likely the post #3. That should help.
I have the same problem...
but mine already unlock using s1tool, rooted using zergexploit and using cwm...
i wanted to install se tweak so i use cwm the installation is complete after rebooting my phone is bricked... so please... im begging help me...
i've tried using flashtool to reflash to stock but i cant get my phone connected... it seems i cant go to fastboot mode...
I managed to get stuck in a boot loop today. I have a locked bootloader and SEUS did the job, so I guess that is the best solution for the problem mentioned by OP.
JOeYJAcX said:
I have the same problem...
but mine already unlock using s1tool, rooted using zergexploit and using cwm...
i wanted to install se tweak so i use cwm the installation is complete after rebooting my phone is bricked... so please... im begging help me...
i've tried using flashtool to reflash to stock but i cant get my phone connected... it seems i cant go to fastboot mode...
Click to expand...
Click to collapse
Since you unlock it via s1tool, you should still be able to use SEUS.
Anw, why fastboot mode? Have you tried to connect it in flashmode?
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
dello2002 said:
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
Click to expand...
Click to collapse
Its "soft-brick" state.
Didnt you have some problems with usb before?
If not, try to charge up your phone once again.
Then read this topic, It will surely help you:
http://forum.xda-developers.com/showthread.php?t=1034997
usb and everything was fine before i started messing around the firmware.
battery was fine and when i was flashing the roms the green light was on and the computer recognised the phone OK so did flash tool. is there anyway of getting the phone into a fastboot mode so i can use the dos fastboot??
thanks
Make the phone root 1st.
Try read here http://forum.xda-developers.com/showthread.php?t=928343
Then u can flash other ROM u like to your device.
Sorry, i am also newbie. but i read a lot thread and follow senior guide ^_^
dello2002 said:
usb and everything was fine before i started messing around the firmware.
battery was fine and when i was flashing the roms the green light was on and the computer recognised the phone OK so did flash tool. is there anyway of getting the phone into a fastboot mode so i can use the dos fastboot??
thanks
Click to expand...
Click to collapse
Even if phone shows up error triangle you should be able to use standart flash mode.
About fastboot dont know, never used it.
hi,
Thanks both for your help, in the end i downloaded the lastest version of flash tool and its got a option of disable verification and worked spot on.
only problem now is rooting. iv looked everywhere and they all say use flashtool
but i can get the other buttons to show up but the root button wont and of course u cant flash cwm with out root. im running 2.3.3
any help would be great thanks
dello2002 said:
hi,
only problem now is rooting. iv looked everywhere and they all say use flashtool
but i can get the other buttons to show up but the root button wont and of course u cant flash cwm with out root. im running 2.3.3
any help would be great thanks
Click to expand...
Click to collapse
No problem, it could be done, but not so simply. I did rooting and xrecovery installation without Flashtool many times since Flashtool werent possible torun on Linux
Root could be done with exploit zergRush; but try SuperOneClick first. It will take some time root it completely manual.
Same with xrecovery, but its much more simple, pasting three or four files to root FS.
Try superoneclick first, if it wont help, will provide more step by step information.
EDIT:
Simpliest solution - almost forgotten
Download the zip provided underthis post.
Extract the zip file.
Connect your phone to computer (remember, that USB debugging must be on!!!)
Run file runme.bat (command line window will appear).
Enjoy !
dello2002 said:
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
Click to expand...
Click to collapse
RELAX first.
You will have to flash the stock SE firmware is by using the X10 Flashtool i .e. get your phone to stock and then root it again.
Here's a video link to the procedure :
http://www.youtube.com/watch?v=HmX-IYNYqL8
And a link to the stock SE firmwares:
http://forum.xda-developers.com/showthread.php?t=920746
I used this firmware :
http://www.4shared.com/file/_Scw5x_R/x10i_301g075_1241-1846.html
Happy Flashing !
hi all,
super one click and doom both say failed(cannot connect to deamon) adb drivers are properly installed and windows reconised phone bit the rooting programs wont. its starting to piss me off.
iv followed so many videos and forums but non work ???????
dello2002 said:
hi all,
super one click and doom both say failed(cannot connect to deamon) adb drivers are properly installed and windows reconised phone bit the rooting programs wont. its starting to piss me off.
iv followed so many videos and forums but non work ???????
Click to expand...
Click to collapse
do you have USB debugging and unknown sources turned on your phone? Because its really strange why adb cant connect.
What ROM and kernel you are currently running on?
@dello what does ur pc say when u type adb devices?
Sent from my X10S using XDA
hi,
running the official rom and kernal that the SEUS installed running 2.3.3
and yes debugging mode and allow are both on but still says cannot connect to deamon, could it be the boot loader? i put ICS on a xperia play and did that fine, do i need to unlock the bootloader like i did with the play?
i did try to but the se website wont unlock it
and ADB in dos wont pick it up list empty
cheers
Hello all.
My Xperia X10 Mini Pro is stuck on bootloop as you can see on this video
http://youtu.be/EhaBn0uuSvE
It just got like that from one moment to the other..I was using stock ROM
I tried to flash with Flashtool with these ROMs
U20a_2.1udpt1_Generic
ST17i-Active_4.1.B.0.431-1254-6360_SONY
On the first ROM it gets 100% successfull but still cant boot !
This phone was bought on Portugal, so I dont know if the ROM makes any difference..
Need some advice please !
I've read somewhere that Gordon's Gate (part of Flashtool) can still access a phone even when it bootloops.
Could you document what steps you already took? Perhaps link to the article you followed? (Below is a list of certain steps one usually takes when installing custom ROMS, but they are by no means always necessary, could you perhaps indicate what you already did?)
Rooted Yes/No/Not Sure
ClockWorkMod installed Yes/No/Not Sure
Unlocked bootloader Yes/No/Not Sure
Custom kernel Yes/No/Not Sure
The location of where the phone was bought will not make a lot of difference for the ROM. It might affect things like hardware keyboard layouts, but there are fixes available for those. But things like specific baseband and firmware are still important. By carefully reading the description, you can usually check if your phone can be used.
To be honest, I only have used Flashtool to flash new kernels to my X10 Mini Pro, for just installing another ROM I use ClockWorkMod.
What you can try:
Unbrick through SEUS: here (video)
I've read about people unbricking their devices with PC Companion, here.
If you should be able to regain access to the phone and still want to tinker:
This ROM works nice with the stock kernel
Later, you could unlock the bootloader, flash custom kernels (nAa ICS 04) and install ROMS needing such custom kernels (the U20 ICS ROMS, like MiniCM9)
Should you feel the need to ever unlock the bootloader, use this tool
Cheers and thanks for your post !
I used SEUS and updated to latest firmware but still no success on booting. It stills the same...
Rooted No
ClockWorkMod installed No
Unlocked bootloader No
Custom kernel Not Sure
Any chance that you can point me a stock rom and stock kernel to see if it boots that way?
JotaM07 said:
Cheers and thanks for your post !
I used SEUS and updated to latest firmware but still no success on booting. It stills the same...
Rooted No
ClockWorkMod installed No
Unlocked bootloader No
Custom kernel Not Sure
Any chance that you can point me a stock rom and stock kernel to see if it boots that way?
Click to expand...
Click to collapse
Don't update, repair... leave your phone unplugged when SEUS searches for updates, it can't recognise your phone when it's not connected and will give you a repair option. choose that, and make sure you select your phone from the list presented. it will then flash original kernel and firmware to your phone.
Don't know which kernel you flashed before you got this bootloop, but the second rom you mentioned in your opening post isn't even for your phone, so i guess you got confused with what goes for your phone. You don't even get a kernel logo, so i guess you flashed a kernel for a different model altogether, or your stock kernel got corrupted. a repair should fix it.
I'm now updating on PC Companion like belgianguy said
If unsuccessfull I'll follow your instructions, thanks a lot in advance !
Same on PC Companion..no boot !
SmG67, I dont see any repair option on SEUS. It detects the phone and says thar it's updated. If I remove the battery while is searching my phone it keeps saying that it's updated. What am I doing wrong ?
On PC Companion I got the Repair option, it repaired, but...surprise...still can't boot !
JotaM07 said:
Same on PC Companion..no boot !
SmG67, I dont see any repair option on SEUS. It detects the phone and says thar it's updated. If I remove the battery while is searching my phone it keeps saying that it's updated. What am I doing wrong ?
On PC Companion I got the Repair option, it repaired, but...surprise...still can't boot !
Click to expand...
Click to collapse
That's a shame... because you now have all official sony ericsson firmware on your phone, kernel and rom... If it's still not booting the kernel, there's nothing you can do about it, maybe a repair-shop might be able to fix it.
Well, a repair-shop isnt able to fix it because the mini-usb port has bad contact and they consider this phone out of warranty because of that ! It almost never happens that bad contact..
JotaM07 said:
Well, a repair-shop isnt able to fix it because the mini-usb port has bad contact and they consider this phone out of warranty because of that ! It almost never happens that bad contact..
Click to expand...
Click to collapse
Well if it's that far gone it might very well be a hardware issue. But just to be sure, could you start Flashtool and see if it still recognizes the device (see screenshot of what I see).
If it isn't able to, an older version of s1tool had an IDENTIFY option that required you plug the USB cable into the computer (but not in the phone), to shut down the phone, then push the BACK button and then plug the usb cable into the phone.
The bad contact you mentioned might be causing troubke as well, are you sure it isn't the cable that is at fault? Perhaps try to attach the USB cable in such a way that its not stressed and so that the phone cannot move (to prevent it from disconnecting due to a bad contact). Your flashes very well might have gone faulty because of that. But then again, the SEUS/PC Companion flashes seem to have succeeded, so hopefully Flashtool can shed some light here.
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
6/030/2013 18:30:20 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
16/030/2013 18:30:20 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Use SEUS to restore Download from:
SEUS
Dont forget to pull of your battery for 4 seconds, for turn off your phone before connect your phone.
gnickz0r said:
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Click to expand...
Click to collapse
Press home and power buttons together, it will restart the phone, then start pressing the back-button repeatedly to get back into recovery and restore your previous rom from there. (Come to think of it, following my last paragraph below, you probably don't have recovery on your phone anymore, so, as Rempty mentioned above, repairing with SEUS or PC Companion would be the start to recover your phone to a usable state,.)
The error flashtool gave you is because you didn't unlock the bootloader and didn't change the kernel on your phone. It can't flash any non-sony kernel on a locked bootloader.
What is this 'update.zip' you're talking about? Most full roms have more informational names to distinguish between different zips. An update.zip is usually only for hotfixes to ROMS already flashed, and not a complete ROM.
Thanks a lot guys. I solve my problem with SEUS.
Phone completely formated.
Love you guys
Hey guys I hve instaled xrecovery and minicm9 too on my x10 mini pro I hve wiped chache,etc nd when I reboot , it hangs on SE logo plz help me
SE logo?? You forgot to install nAa kernel, do you unlock bootloader??, remember that minicm9 is not for stock kernel.
Sorry for my bad english
Sent from my iPhone6 using xda business
W'll when I try to unlock the bootloader it gives error can u plz help me
william chauhan said:
W'll when I try to unlock the bootloader it gives error can u plz help me
Click to expand...
Click to collapse
use flash tool to unlock ur bootloader
make sure ur fone is rooted
Sent from my U20i using xda premium
I'm already using flashtool bt it's nt working
william chauhan said:
I'm already using flashtool bt it's nt working
Click to expand...
Click to collapse
What's your phone's build date? Ex.11w37(written on the stick placed on the back )
Sent From My BEAST , I mean X8
My build no. Is 2.1.1.A.0.6
Plzz help me..
Plz help me.. I try to unlock the boot loader .. and the phone bricked !!!! what am i going to do??
i try the PC COMPANION but my phone did not detect it..
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Hey guys I used the flashtool to unlock the bootloader and I also followed the steps too but problem is when the phone was rebooted it didnt read the sim card now what should I do ? Please help
thas911 said:
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Click to expand...
Click to collapse
my phone is in HARD BRICKED.. my phone is dead the phone didnt charge and totally dead.. what should i do?? help me??
i also have a hard bricked,even when i put it to charge the phone its not blink the led
help