CM9 Wifi not turning on - Motorola Droid X2

New to the forum... first post long time lurker.
I installed the Beta 1 CM9 ROM with WIFI patch and GAPPS:
http://forum.xda-developers.com/showthread.php?t=1661572
I followed the instructions including installing the WIFI patch zip. No errors and everything went smooth. The only problem I have is that the wifi wont turn on. When I slide the "on/off" switch it immediately goes back to off.... the middle of the screen says "turning wifi on..." but it never turns on.
So, I SBF'd back to 2.3.4 and reinstalled everything thinking I must have messed something up. Nope, still no wifi.
I changed around my router settings: low channel (1-6), AES only, only B and G signals... still no luck.
I searched around the forums, but could not find a specific answer to this.
Any ideas?

I had that problem with cm7 try paranoid android.
Sent from my MB870 using Xparent Cyan Tapatalk 2

Wait, do you have a Droid X2 or a Milestone X2? If you have the DX2, you don't need the wifi patch. The MX2 is the only thing that needs the wifi patch due to a software bug of some sort.
Make sure you have SBF'd correctly to 2.3.4, maybe even try SBF'ing to 2.3.3 or earlier, then SBF back to 2.3.4 and see what happens.

Related

[Q] (SOLVED) No Internet Access on MIUI 1.6.24.1

Since installing MIUI 1.6.24.1 I do not have internet/data access on my phone.
I can make/receive phone calls and txts, however I cannot connect to Google or Android Market.
I have tried EA28, EC01, and EC09 modems with multiple battery pulls (both plugged in and not) between each with no effect.
When trying to input my account info for Market I get "Can't establish a reliable data connection to the server." Normally (on UKB 2.1) I have full service at my desk. My "3G" icon is constantly flickering on and off and under About Phone 3G Service only stays connected for a second then switches back to "Connecting".
Am I missing something?
Jp
Update: Solution found - See Post #25
Dial *228. The keypad won't pop up so hold menu and press 1 on the keyboard to reprogram your phone. I had that happen this morning. I didn't realize I didn't have internet since I was using wifi all night after I flashed it. The voice prompt will tell you it succeeded but the UI will say it failed. You'll lose service. Just reboot. Worst case scenario, if you still don't have any service at all shut down then pull the battery. Boot back up and you should be good.
Still no Internet.
My 3G connection only ever stays active for 8 sec.
I am currently on EC09 Radio which I really havent used much. However, I have found that for me EA28 was usually the most reliable Radio. Is it possible that EC09 just doesn't work well for me here?
Jp
That's definitely not the same issue I was having. My 3G icon stayed on the screen but all my apps simply told me I had no internet. The 3G icon never went away on me. Sorry I can't help you further. Maybe somebody else has some insight. Try reinstalling and possibly a new radio like you said.
You should try a new radio, I'm currently on Ed04 and I have had no problems with Internet.
Sent from my SCH-I500 using XDA Premium App
I have the same problem ...my 3g icon shows and my browser/apps say I have no internet
BUT
I'm on Cricket network and flashed
different modems and idk if I broke my flash but then again I heard cm7/miui breaks data for cricket so idk but same issue
Sent from my SCH-I500 using XDA App
JeezyMT3G said:
I have the same problem ...my 3g icon shows and my browser/apps say I have no internet
BUT
I'm on Cricket network and flashed
different modems and idk if I broke my flash but then again I heard cm7/miui breaks data for cricket so idk but same issue
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
That sounds more like the issue Crashspeeder described, you may only need to reactivate your phone. My data appears to be going down every 8 seconds.
Jp
allcity187 said:
You should try a new radio, I'm currently on Ed04 and I have had no problems with Internet.
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
ED04 has same issue on both MIUI and CM7, I am beginning to think it has nothing to do with the modem.
Jp
Keep in mind that CM7 MTD and MIUI MTD are essentially the same rom since MIUI MTD is based on CM7 MTD so I'm not sure your assessment is entirely correct. It may be that ED04 isn't compatible with these two roms. I'm on EB01 (yea, dinosaur) and it's working fine.
I did reactivate my phone but using *22804 for cricket in my area and one of the times it said failed I lost data pulled battery rebooted got it and still nothing ....and another it said success and still a no go
Sent from my SCH-I500 using XDA App
Well I can cross off EC01, EA28, EC09, ED04, and now EB01 as things I've tried. None of them worked. That is my reasoning as to why I think it is unrelated to the radio.
Well, I guess I'll keep playing with it for a bit and try all the other radios I can get ahold of.
Jp
Hah. I would've stopped at 3. I think you've proven it's not the modem. I assume you tried reinstalling and still nothing. Not sure what could be going on
Sent from my SCH-I500 using XDA App
Seems that I'm in the same boat here............... app/market tries to connect and I see the data stream flashing but then in a few seconds it says no internet/ data connection. For reference I'm on Metro PCS and I had data working on Evil and Com rom.
Also I flashed JT's CM7 for a quick test and no internet on that either, wierd......
Junkboy0 said:
Seems that I'm in the same boat here............... app/market tries to connect and I see the data stream flashing but then in a few seconds it says no internet/ data connection. For reference I'm on Metro PCS and I had data working on Evil and Com rom.
Also I flashed JT's CM7 for a quick test and no internet on that either, wierd......
Click to expand...
Click to collapse
Yeah after flashing Miui and losing data I Odined back to stock and still got the same ..no data ... I'm on Cricket which is like Metro
Sent from my SCH-I500 using XDA App
I've been screwing with this all day. I have both the 3q flicker and sometimes it stays on but the arrows don't flash. either way no data. Flashed back to stock and data works. Also works on comrom with the last 3 radios (including the new ec09 leak).
otherwise the install went well for everything (both muiu and cyanogen). MUIU was a pain because i couldn't find terminal emulator but then had an idiot moment when i found it in the power menu but it didn't work, 3 of the 4 reboots did the same thing. hot boot was the only one that did anything different.
I've used the stock kernel and the OTB kernel. Same story both times. I'm not sure what other info would be relevant but I'm happy to help diagnose this problem. Getting a new fascinate because I was one of those who the ESN swap didn't fix my other data problems (cut out and slow). Maybe that's a lead? Anyway, i'll have a backup phone for a couple days if I want to mess with it without worry.
thanks for all the help and work. I like it a lot, it's super quick!
I'll just use it as is for today, but when I wake up tomorrow I'll flash back to Evil or com rom see if my data comes back. If data hasnt comeback when I flash back I'll check my data settings with QPST 2.7 and if need be I'll re-flash the data settings with Miui installed.
I had the same issue after flashing the latest MIUI build. Even after rebooting twice I still had no data connection. Oddly enough after doing a battery pull, then holding the power button down to clear any residual power; it started working again.
Update, I work graveyard so I decided to do it before i go to bed, anyway I flashed back to stock and as slow and pathetic as it is... data is working. I'm flashing evil as I type.......wait for it......."convert data patition , back up operation, blah blah blah Two Minutes" ..........*stares blindly at Samsung logo* OK! Evil is up and running with data which means something about miui and CM7 is breaking our data .
*warning, rant-ish*
I would hate to not be able to go back to Miui, I had my theme made up of of a custom Ore no Imouto icons everywhere *ashamed* with a custom font and a sweet HTC bootloading screen with the Fringe intro song Maybe data isn't too big of a deal besides who needs pandora, tapatalk, email, OMG! my precious Fantasy sport teams...... wait a sec, the NFL is still on lock out. Fellas we need to find a fix for this, preferably before the next NFL season.....My Solid Snakes HAVE to be back to back champs
So, a quick update...
First off, my Nandroid backup of UKB 2.1 is apparently corrupted or something because after flashing/repartitioning with EB01, I couldn't do a restore. So basically, I'm stuck with either MIUI with no data or rebuilding UKB 2.1 from scratch which undoubtedly will be a real pain.
Second, my data has now worked once. I was able to open Google today after my phone had been off for several hours. When I booted my phone up it was first stuck in Airplane Mode so I powered down and pulled the battery. When I booted back up, my data worked, I was able to load Google in the browser and when I searched for "test" it failed. It got part way into loading my search results when it crashed out.
So, it looks like I'm going to just stick with MIUI for the time being and just do without the data when I'm off WIFI.
The only thing unusual about my setup is that I am using the extended battery. It is the standard VZW 2200 mAh not any of the 3rd Party ones but I guess that could be making a difference.
If any developers want to see any logs or anything just let me know what commands I should run and I'll post the results.
Jp
With all cyanogen mod you sometime lose data after you poweroff your phone. Try rebooting or battery pull. If that doesnt work, you probly gonna need a new phone. I dont think its modem or rom related. The phone data anttena is done.
Sent from my SCH-I500 using XDA App

[Q] Lost 4G after a frozen screen

Hi! I had Das Bamf 1.8 installed with the latest Froyo CDMA/LTE combo radio.
I was downloading an update to Google+ when all of a sudden the screen froze. I decided to pull the battery out and restart; surprisingly, 4G hasn't worked since then.
I went into the network settings to find one change that I've never seen before (at least I think): "Ciphering ON". I repeatedly tried to press Toggle Ciphering but it refused to go off.
With this, I thought that reinstallling the radio combo will somehow fix it; it didn't. I then decided to install the new Ginger radio (MR2.5) along with Bamf GingerREMIX 2.1; this didn't solve the problem as well.
Am I screwed in this case? Could it possibly be that the service is down temporarily in my area? I've googled around but there doesn't seem to be much documentation regarding to Ciphering...
Thanks!

[Q] Wifi not working and I have tired every thing in the forum I can find

I know this had been disscused but no one seems to come up with a concert answer, My phones Wifi and Bluetooth isnt working. My wifi just shows an error and on the DarkSide 3.1 rom if I try to toggle it it restarts. My bluetooth shows like normal but when I toggle it it just grays out then comes back to its normal unchecked state. I'm on the DarkSide 3.1 Rom on 2.3.5 and the faux123 OC 1.3 kernal. I have tired the all the methods in these post
http://forum.xda-developers.com/showthread.php?t=1353275
http://forum.xda-developers.com/showthread.php?t=1360594
http://forum.xda-developers.com/showthread.php?t=986499
http://forum.xda-developers.com/showthread.php?t=1205775
So do I need to just factory warreny it if I even can at this point? or am I blind?
Again thank you so much guys any responds of what you might think it is would be more than appreciated.
Thanks, Adam

Wifi/Radio Problems on cm10

The short of it is, my Wifi crapped out for reasons beyond my experiences thus far.
The long of it. I flashed epinter's 07/25/2012 Nightly and everything seemed to be working nicely, Wifi especially. Then today, out running errands and dropped my Atrix in my Car Dock and attempted to turn on Bluetooth for the first time since flashing, and the device froze then restarted. Once back up, I tried turning Wifi back on, and the device froze again and restarted. Thinking maybe the radio driver went south, I grabbed epinter's 07/27/2012 build (epinter-cm10-20120727_1846-UNOFFICIAL-olympus.zip), and still no luck. Back into Recovery, Wiping everything and also factory resetting then flashing twice over again, boot up, still no wifi, and if it manages to seemingly fire up, the device hangs and restarts.
Within the last 2 hours (Been at this for about 12 hours now.) I grabbed Jokersax's build (Beta 0.1.0), wiped/reset/flash twice as I have before. Now as I take a breath I noticed that the Wifi Icon came up in the Notification bar, but when I go into Settings and Scan, I see none of the Networks around me. I looked under Advanced and noticed that my MAC Address is 'Unavailable' nor am I showing an IP address, even though Wifi is saying 'On'. Verified on my Router, my Phone is not connected to it.
Odd Side note, installed aLogcat just to see if I could catch any errors, and it is not giving me anything, that is, I am not seeing any logs through the app. Most likely an unrelated issue, but still a tad annoying.
Everything else seems in order, including Mobile Data (Able to access Web Pages, Market/Play Store, receive email, etc.). Just Wifi pretty much 'Lights are on, but no one is Home.'. Any suggestions on next steps?
We discussed this issue over in some other threads and conclusion is that it's a hardware malfunction Ur broadcom chip is burned,many people (including me) had that problem.
Sent from my MB860 using xda app-developers app
I need to really work on my searching, tried several variations of 'atrix WiFi cm10' and could not pin down a related thread.
But back on topic, CRAP! What I was hoping was not the case. Thanks for the reply, will continue to dig for those threads and cross fingers the chip really is not fried (doubtful but hey, people can dream right?).
Thank you for the reply.
Sent from Xoom running cm10
try making a clean install and you'll se that you won't have that problem!
Stark5 said:
I need to really work on my searching, tried several variations of 'atrix WiFi cm10' and could not pin down a related thread.
But back on topic, CRAP! What I was hoping was not the case. Thanks for the reply, will continue to dig for those threads and cross fingers the chip really is not fried (doubtful but hey, people can dream right?).
Thank you for the reply.
Sent from Xoom running cm10
Click to expand...
Click to collapse
I can't search the threads right now as i am typing from my phone-search is limited to 20-30 posts... But keywords for ur search should be : "atrix wifi error" or "wifi and bluetooth error on atrix" Several forums have this kinda threads,not just xda unfortunately ... seems like it's very often malfunction on this lovely phone. I couldn't repair my previous atrix so i bought another one.
Sent from my MB860 using xda app-developers app
imarmand said:
try making a clean install and you'll se that you won't have that problem!
Click to expand...
Click to collapse
We're talking fastboot wipe kind of clean install? Going to give that a go as a last attempt, will post results here.
Glimmer of hope tonight, was discussing the problem with a friend, went to turn on WiFi and it actually scanned and connected for about 2 minutes before crapping out. This tells me there maybe life to the chip still. Now to get fastboot to connect and try a wipe and see what happens.
Sent from Xoom running cm10
Any news on this front? I am one of the afflicted as well.
I'm having a similar issue. though my BT works just fine, no delays, no errors, no intermittance.
Wifi, I can scan for networks just fine. i click on mine to connect. it shows connecting, noting that when it says connecting the signal shows 1 bar as compared to the full set of wifi bars when scanning, i am also right next to the AP. is tries connceting for about 20 seconds or so. then goes back to saying "saved" under the SSID, other networks showing "disabled" when this happens. i originally noticed this after flashing epinters cm10. i tried flashing 37p, 36p and 30p radios with no difference.
EDIT: also want to note that i HAVE disabled the "avoid poor connections" option. and have tried setting static IP.
I flashed the same and I am unable to get my wifi to work after clean wipe, radio install or anything else that I have tried. Could software have really burned up a wifi radio????
johnmartin1981 said:
I flashed the same and I am unable to get my wifi to work after clean wipe, radio install or anything else that I have tried. Could software have really burned up a wifi radio????
Click to expand...
Click to collapse
Mine works occasionally so I don't think the radio is dead. The rom just acts like it's not there most of the time and doesn't give a mac address. Sometimes it works though after a reboot. Would flashing a different radio help? My baseband version says N_01.77.37P
I had an IP and a MAC, but no wifi internet.
Using mobile data, I downloaded Set DNS and then enabled wifi, works fine.
Now it's working but mobile data is going very very slow, it took 5min to download Set DNS.
I have a skyrocket but the "no wifi" issue is probably the same - your not getting DNS
I'm going back to CM9 for now.
+1 wifi matter under CM10
Try rebooting the router.
Experienced same issue (unable to connect, showing full bars, dropping to 1 bar when connecting and never being able to complete a connection) rebooting my router has fixed the issue. I'm not technical but it might have to do with the DNS release for addresses .. in any case unplugging my router for a bit and restarting it fixed the issue for me.

CM10 Wifi

Anyone know of a fix for CM10 wifi? It stays connected (the wifi bar stays blue) but I can't download or upload anything. It will then randomly start working then stop again. I flashed to CM10 last night after being on CM9 for a few days. I had no problems with wifi in CM9. I honestly would love to just stay with CM7 but I had way too many wifi problems it drove me off the walls. CM9 seem to fix it and CM10 seems to break it again for me. Any suggestions?
Simpsons11 said:
Anyone know of a fix for CM10 wifi? It stays connected (the wifi bar stays blue) but I can't download or upload anything. It will then randomly start working then stop again. I flashed to CM10 last night after being on CM9 for a few days. I had no problems with wifi in CM9. I honestly would love to just stay with CM7 but I had way too many wifi problems it drove me off the walls. CM9 seem to fix it and CM10 seems to break it again for me. Any suggestions?
Click to expand...
Click to collapse
Wifi works fine for me in CM10. Are you using an MX2 instead of a Droid X2? Because theres a wifi patch for MX2 users.
MX2 = Milestone Droidx2 (which is a non-Verizon version right?) I am using a Verizon Droid X2 and pretty sure it is not a MX2 as I mad the mistake and flashed the wifi patch and it wouldn't even turn on until I re-flashed everything again. When I went to CM10 last night, I SBF back to 2.3.4 before I flashed it into CM10 (I had a keyboard error that wouldn't let me do anything so I couldn't install system recovery).
jsgraphicart said:
Wifi works fine for me in CM10. Are you using an MX2 instead of a Droid X2? Because theres a wifi patch for MX2 users.
Click to expand...
Click to collapse
could it be your router thats having the problem?
jsgraphicart said:
could it be your router thats having the problem?
Click to expand...
Click to collapse
I have wondered the same thing actually. I read that sometimes channels 10 and 11 cause issues so I changed that. What makes me think it is something else, is that it happens randomly on just about any wifi. Sometimes it just won't connect and I have to keep trying, other times it connects perfectly and has no issues. Other times it works fine then it just starts not working. I am in the process of doing an SBF since I did something to cause it to bootloop.
Well if it doesnt fix the problem, try using something like wifi fixer in the play store.
jsgraphicart said:
Well if it doesnt fix the problem, try using something like wifi fixer in the play store.
Click to expand...
Click to collapse
I couldn't get it to work and have no time to mess around with it. I flashed back to Android 4.04 and everything is working fine. I play around with it this weekend and see if that app works. Does your Android 4.1 flash so the up and down arrows in the your wifi showing data activity?
Simpsons11 said:
I couldn't get it to work and have no time to mess around with it. I flashed back to Android 4.04 and everything is working fine. I play around with it this weekend and see if that app works. Does your Android 4.1 flash so the up and down arrows in the your wifi showing data activity?
Click to expand...
Click to collapse
I'm not connected to wifi right now so I cant look at it. But off the top of my head, I'm pretty sure it does show activity on the icon.
jsgraphicart said:
I'm not connected to wifi right now so I cant look at it. But off the top of my head, I'm pretty sure it does show activity on the icon.
Click to expand...
Click to collapse
It is so weird. Decided to flash back, got on wifi no problem then it just stops working. It shows I am connected but not fully connected (gives grey signal bars). CM9 works fine for wifi but CM7 and CM10 have been giving me big hassles.

Categories

Resources