Anyone know of a fix for CM10 wifi? It stays connected (the wifi bar stays blue) but I can't download or upload anything. It will then randomly start working then stop again. I flashed to CM10 last night after being on CM9 for a few days. I had no problems with wifi in CM9. I honestly would love to just stay with CM7 but I had way too many wifi problems it drove me off the walls. CM9 seem to fix it and CM10 seems to break it again for me. Any suggestions?
Simpsons11 said:
Anyone know of a fix for CM10 wifi? It stays connected (the wifi bar stays blue) but I can't download or upload anything. It will then randomly start working then stop again. I flashed to CM10 last night after being on CM9 for a few days. I had no problems with wifi in CM9. I honestly would love to just stay with CM7 but I had way too many wifi problems it drove me off the walls. CM9 seem to fix it and CM10 seems to break it again for me. Any suggestions?
Click to expand...
Click to collapse
Wifi works fine for me in CM10. Are you using an MX2 instead of a Droid X2? Because theres a wifi patch for MX2 users.
MX2 = Milestone Droidx2 (which is a non-Verizon version right?) I am using a Verizon Droid X2 and pretty sure it is not a MX2 as I mad the mistake and flashed the wifi patch and it wouldn't even turn on until I re-flashed everything again. When I went to CM10 last night, I SBF back to 2.3.4 before I flashed it into CM10 (I had a keyboard error that wouldn't let me do anything so I couldn't install system recovery).
jsgraphicart said:
Wifi works fine for me in CM10. Are you using an MX2 instead of a Droid X2? Because theres a wifi patch for MX2 users.
Click to expand...
Click to collapse
could it be your router thats having the problem?
jsgraphicart said:
could it be your router thats having the problem?
Click to expand...
Click to collapse
I have wondered the same thing actually. I read that sometimes channels 10 and 11 cause issues so I changed that. What makes me think it is something else, is that it happens randomly on just about any wifi. Sometimes it just won't connect and I have to keep trying, other times it connects perfectly and has no issues. Other times it works fine then it just starts not working. I am in the process of doing an SBF since I did something to cause it to bootloop.
Well if it doesnt fix the problem, try using something like wifi fixer in the play store.
jsgraphicart said:
Well if it doesnt fix the problem, try using something like wifi fixer in the play store.
Click to expand...
Click to collapse
I couldn't get it to work and have no time to mess around with it. I flashed back to Android 4.04 and everything is working fine. I play around with it this weekend and see if that app works. Does your Android 4.1 flash so the up and down arrows in the your wifi showing data activity?
Simpsons11 said:
I couldn't get it to work and have no time to mess around with it. I flashed back to Android 4.04 and everything is working fine. I play around with it this weekend and see if that app works. Does your Android 4.1 flash so the up and down arrows in the your wifi showing data activity?
Click to expand...
Click to collapse
I'm not connected to wifi right now so I cant look at it. But off the top of my head, I'm pretty sure it does show activity on the icon.
jsgraphicart said:
I'm not connected to wifi right now so I cant look at it. But off the top of my head, I'm pretty sure it does show activity on the icon.
Click to expand...
Click to collapse
It is so weird. Decided to flash back, got on wifi no problem then it just stops working. It shows I am connected but not fully connected (gives grey signal bars). CM9 works fine for wifi but CM7 and CM10 have been giving me big hassles.
Related
I think the issue is called "data drop"? Anyways, although I am currently running Axura 2.0.3, it doesn't seem to matter, all 2.2's seem to do it. There will come a point in the day when I try to open something web-based, the 3G activity on the notification bar just does nothing. I suppose rebooting solves it for a while, but going to settings>wireless & network>mobile networks>network operators>search now and then re-choosing T Mobile somehow resets it as well.
-Can somebody explain what the bigger issue is here (why it does this on 2.2)? -Is there some type of a "fix" out there, or one contemplated?
-If there isn't, is there a better way to re-set the data than either of the 2 things above? If re-registering solves it, how does it get un-registered in the first place?
-On 2.1 ROMS (and even stock) I was routinely getting data speeds of between 4-5M. On 2.2 it's hardly ever more than 3. Is this something inherent in 2.2? Seems like we went backwards a bit???
Hmm, I haven't seen it yet. I did experience Airplane mode once on one of the earlier Onyx releases, and the only thing that solved it was to reboot the device.
I have experienced a strange issue with the browsers though, I will get a notification that internet connection is required, but the page loads, I even tried to download and install an alternative browser, and got the same annoying pop-up, mind you I was on 3G, and also used the market to download the app to install it at the same time in the same location.
lqaddict said:
Hmm, I haven't seen it yet. I did experience Airplane mode once on one of the earlier Onyx releases, and the only thing that solved it was to reboot the device.
I have experienced a strange issue with the browsers though, I will get a notification that internet connection is required, but the page loads, I even tried to download and install an alternative browser, and got the same annoying pop-up, mind you I was on 3G, and also used the market to download the app to install it at the same time in the same location.
Click to expand...
Click to collapse
That also happened to me yesterday. The pages in the browser does load but it's annoying that a pop up message will always appear when using the browser. I'm using Froyo now for almost a week and it happened the first time yesterday. Then i reboot then it's fixed.
I am getting a lot of disconnects too. But it also happens when I am on wifi, sometimes wifi refuses to start and errors out. Onyx 3.1.
Just happened trying to post this - wifi.
Mobility... www.MemosWorld.com
Did your area recently have 4G go live? I've had data problems on both mine using froyo and my girlfriends running stock ji6. So I don't feel the froyo roms are the cause. Last night neither of us could get data to work for more than a few minutes at a time.
Sent from my SGH-T959 using XDA App
I too have noticed this on all the 2.2 roms. What I see is the up/green arrow on the 3G icon light up but not the down/orange arrow. I'll try loading stuff up on the web/market and nothing but all the while that green arrow is lighting up. I'm guessing green = upload and orange = download? Idk, but its annoying as hell.
iynfynity said:
That also happened to me yesterday. The pages in the browser does load but it's annoying that a pop up message will always appear when using the browser. I'm using Froyo now for almost a week and it happened the first time yesterday. Then i reboot then it's fixed.
Click to expand...
Click to collapse
I just came back to the office and was able to use it without the annoying pop-up.
It is strange, the page loads in the background while the pop-up comes up.
Ahhh, the Froyo gooodies LOL
Scoobyracing03 said:
Did your area recently have 4G go live? I've had data problems on both mine using froyo and my girlfriends running stock ji6. So I don't feel the froyo roms are the cause. Last night neither of us could get data to work for more than a few minutes at a time.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Not yet. Philly always gets hit up last. I did some more searching and found this in the early part of the Axura thread:
"The Lib & Bin fixes are for the battery.
I haven't had any problem.
It seems to be a hit & miss type of thing.
He told me That is was probably the same issue that was causing his network location to not work, and that he fixed in with the lib and bins. Just waiting on a release. Everything else seems great in this rom. Runs much smoother that the JPM build."
I have no idea what this means or if it's relevant, but there's something ain't right...
Running Axura. Since 2.2 does not see the hsdpa, I loaded the ji6 modem and all is working great. No data issues at all.
SeXed by Axura
ransz28 said:
Running Axura. Since 2.2 does not see the hsdpa, I loaded the ji6 modem and all is working great. No data issues at all.
SeXed by Axura
Click to expand...
Click to collapse
how's the battery life?
Sent from my SGH-T959 using XDA App
No update on this thread. Anyone got a fix?
I am experiencing the same problem with all the 2.2 ROMs, currently on bionix-v 1.2.1 with KB1 modem.
When it is in the "data drop" condition, sometimes voice calls would not connect and SMS fails to send. But signal status still showing full bars (I live next to the tower).
I'm on an UMTS/HSPA network, so it does look to be a ROM rather than a radio problem. I've tried almost all the available modems - same problem. Yes, I use my phone heavily so there is always one or two apps trying to access the network - and they would be all be stuck (or errors) at the same time.
If I'm tethered, either via 2.2 AP Mode or USB tether, the session is stuck until reset/reboot.
However, the free "WiFi Tether for rooted users" app from the market gets around this condition all the time... somehow :
Cyanogen 7 Nightly for the slide has been released.
http://mirror.teamdouche.net/?device=espresso
Flashed - and haven't run into any issues as of yet. Seems to be pretty fast too.
matt897 said:
Cyanogen 7 Nightly for the slide has been released.
http://mirror.teamdouche.net/?device=espresso
Flashed - and haven't run into any issues as of yet. Seems to be pretty fast too.
Click to expand...
Click to collapse
Try the screen off animation in cyanogenmod settings its prettyy cool
thebowers131 said:
Try the screen off animation in cyanogenmod settings its prettyy cool
Click to expand...
Click to collapse
Screen on animation is also awesome. Kind of pointless but I still enabled it
Sent from my T-Mobile myTouch 3G Slide
I love the screen off animation lol
Anyone else only connecting to the Edge network? I went into Wireless & Networks > Mobile network settings and made sure "Use only 2G networks" was Unchecked but still only connecting to Edge for me, the area I am in usually runs "H" with 6.1.0.
Network is fine for me
Sent from my T-Mobile myTouch 3G Slide using XDA App
sryan1983 said:
Anyone else only connecting to the Edge network? I went into Wireless & Networks > Mobile network settings and made sure "Use only 2G networks" was Unchecked but still only connecting to Edge for me, the area I am in usually runs "H" with 6.1.0.
Click to expand...
Click to collapse
Might possibly be performing service upgrades on 3G in your area, it happens from time to time.
Oooo
im liking it!
a) All my homescreen apps somehow dissapeared.. but ok, i guess ill place them back.
b) A2ext by acejokey doesnt work very well.. some apps load, others dont. When you go to "manage apps" is shows the apps with the "sd card" icon next to it.
c) How do I flash the google apps? i clicked flash.. then got to home-screen, it asked me which apps i wanted to install. I accidentally hit cancel. Now what?
:Edit:
a) I had a different Launcher. Thats why
how is the built in VoIP/SIP working on this build, any thoughts on that matter ?
How is the market? Weather bug be fine?
Everything is working fine...one random restart but I believe it was because I was overclocked to high. My slide is usually only stable at 825 mhz. The makeover is nice and the new keyboard is fantastic. Copy and paste is a ++ can't believe this is just a nightly and not stable. 0 problems. Thanks Cyanogen!
Sent from my T-Mobile myTouch 3G Slide using XDA App
anyone having problems with the usb mount and debugging icons not showing up when connected to computer? i'm trying to copy files to my sd, but it won't show up at all.
Wifi web-page surfing not working for me. It's also difficult to connect to wifi.
xologist said:
Wifi web-page surfing not working for me. It's also difficult to connect to wifi.
Click to expand...
Click to collapse
Not sure if it would work with gb but try hebrewtoyou's wifi fix. It only affects some devices. My wifi is working fine.
I also love the built in tether, works better than anything else I've used, especially since it shows as an access point, not an ad-hoc network.
MusicMan374 said:
Not sure if it would work with gb but try hebrewtoyou's wifi fix. It only affects some devices. My wifi is working fine.
I also love the built in tether, works better than anything else I've used, especially since it shows as an access point, not an ad-hoc network.
Click to expand...
Click to collapse
I *highly* doubt it will work, as those modules are meant for a 2.6.29 kernel, but trying it won't hurt.
Flashed this before work, loving it. I was loving the earlier version too, but it's nice to see Nightlys and be a part of this stuff. I didn't mess around with the CM6 Nightlys... Can't wait for more updates
worked fine until i tried flashing the gapps to it..then as soon as it goes to the touch the android screen it reboots everytime...has anyone gotten the gapps to work or is there an udated version?
nevermind i did some searching and found them...
what happened to battery percentage on status bar, i wonder if they got rid of it cuz the battery sits vertical instead of horizontal, or i am blind and i am just not seeing the option.
ladderwalker said:
what happened to battery percentage on status bar, i wonder if they got rid of it cuz the battery sits vertical instead of horizontal, or i am blind and i am just not seeing the option.
Click to expand...
Click to collapse
It's not there. I do not think it is an orientation issue since it works in Cyanoginger and it is vertical.
This is the second time this has happened to my Prime and I have no idea what could cause it. I found one other topic with a similar problem but no solution.
Anyway, last night, everything was working fine. Today, I get home and it connects to my WiFi just fine with full signal strength but when I go to my browser, YouTube or anything that uses the network, it says there's no connection. I restarted the tablet, hotspot and everything multiple times and it will work for a minute or so before stopping again. I haven't installed any new apps recently or made any changes to anything. Everything else on my WiFi network works perfectly.
The last time this happened, I did a factory reset on the tablet which didn't work at all. But the next day it decided to start working fine again. So we'll see if it decides to come back again, but is there any way to fix this when it does happen? Or preferably, prevent it from happening?
Could be having trouble getting an IP from your router.
Having said that the Prime's ability to maintain a connection is hopeless.
I have a Linksys E4200 which blasts a signal 100 metres across the road which my son can pick up.
I can be sitting in the next room and my Prime loses the signal from the same router.
The signal isn't the issue I don't think, it has full bars and other than these two problems, I've never had an issue with WiFi performance.
It's probably worth noting that the WiFi isn't COMPLETELY dead, once in a while, a webpage will come through. It's just that most of the time it just times out before it ever receives a page. I just did a factory reset again which did nothing to help. It timed out when trying to connect to my Google account...but worked on the second try. The Asus homepage timed out when I opened the browser, made it to Google but searching timed out. I was barely able to download TitaniumBackup from Play...just VERY slowly.
Asus tech support was useless as expected...they basically said to factory reset and if that doesn't work to RMA it. I guess if it's not working tomorrow, it's getting RMA'd...
Bandin03 said:
The signal isn't the issue I don't think, it has full bars and other than these two problems, I've never had an issue with WiFi performance.
It's probably worth noting that the WiFi isn't COMPLETELY dead, once in a while, a webpage will come through. It's just that most of the time it just times out before it ever receives a page. I just did a factory reset again which did nothing to help. It timed out when trying to connect to my Google account...but worked on the second try. The Asus homepage timed out when I opened the browser, made it to Google but searching timed out. I was barely able to download TitaniumBackup from Play...just VERY slowly.
Asus tech support was useless as expected...they basically said to factory reset and if that doesn't work to RMA it. I guess if it's not working tomorrow, it's getting RMA'd...
Click to expand...
Click to collapse
At one point i was having similar issues. i had to delete the wifi network and recreate it to get it working. My buddy also had the issue with his droid and the only fix was to use a static ip.
justPorter said:
At one point i was having similar issues. i had to delete the wifi network and recreate it to get it working. My buddy also had the issue with his droid and the only fix was to use a static ip.
Click to expand...
Click to collapse
Do you know how I can set it up as static IP? I'm using an Android phone with WiFi Tether as my hotspot.
It seems to be working fine for now...I'm posting from my Prime. But it worked yesterday for a few minutes then stopped again so it seems to be intermittant problems. I'm debating even sending it in for RMA because with my luck, it'll get there, work fine when they test it and they'll just send it back with no problems found with a couple of Prime-less weeks for my troubles.
Something weird though, my WiFi icon in the status bar is gray when it's usually blue. But it's still working for now...what does a gray icon mean?
Bandin03 said:
It seems to be working fine for now...I'm posting from my Prime. But it worked yesterday for a few minutes then stopped again so it seems to be intermittant problems. I'm debating even sending it in for RMA because with my luck, it'll get there, work fine when they test it and they'll just send it back with no problems found with a couple of Prime-less weeks for my troubles.
Something weird though, my WiFi icon in the status bar is gray when it's usually blue. But it's still working for now...what does a gray icon mean?
Click to expand...
Click to collapse
gray means is connecting/scanning for wifi. it should only work when the icon is blue.
justPorter said:
gray means is connecting/scanning for wifi. it should only work when the icon is blue.
Click to expand...
Click to collapse
Weird, it's working perfectly but the icon is gray...this thing just loves to do weird things.
Are you on a stock rom?
justPorter said:
gray means is connecting/scanning for wifi. it should only work when the icon is blue.
Click to expand...
Click to collapse
I don't think this is true. I believe blue just means the device is in current communication with google servers, e.g. syncing emails. The grey/blue is no indication of success of wifi connection as I understand it.
hairdewx said:
Are you on a stock rom?
Click to expand...
Click to collapse
No, ROM. Completely stock, just rooted.
Bandin, I'm on a C4 and this happened to me about 20 minutes ago.
I was using my Epic 4G Touch ICS FE16 leaked rom using wifi tether - not sprint hotspot.
Watching Netflix
Then it suddenly stopped....said Netflix cannot make a connection.
I quit Netflix and go to main screen and i see my wifi connection is grayed out. So i go to speed test.
Speed test tells me i have connection issues.
I goto my phone and run speedtest and I come back A-OK with 7Mb.
I've even pushed the wifi button on my dock on/off. Disconnected tab from dock select wifi off.
Shut down netflix open it up doesn't work until i do a reboot...
But...this has only happened with my E4GT running wifi tether and stock ics fe16. haven't experienced it on my routers or my neighbors.
I thought I saw a fix for this but I can't seem to find it.This happens to me regardless of what ICS rom I am on. Sometimes when I turn the screen on the wifi won't connect. It says it is out of range or it will just say that the connection is save. I have to turn the wifi off and the turn it back on and tell it scan. Then it will connect. I have tried changing the channel on the router and rebooting the router I connect to but that didn't help. Anybody know of a fix for this?
Unfortunately no...
I have the same condition when using ICS ...
It's very frustrating as you know ..
Since the chance of getting a fix is slim, considering jelly bean is the hot topic these days ...I've reverted to GB.
It's not perfect ....but at least the data and wifi are solid ....with great sound and call quality...
I'm staying rooted stock for a while.....g
I personally have not had any issues with wifi. I am running the ics Gubment Cheeze and have been since the first test build. Not once has my wifi not been there for me. Ics wifi has actualy been MORE stable than GB for me.
Just a silly question ... Do you both have your wifi set to keep wifi on during sleep?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Unfortunately for my my issue is there even on GB based roms. Not sure what is going on. Doesn't do it on my sister's skyrocket or her husband's iphone so I know the router is okay.
Wifi setting for me is "always on "...
As I try to take advantage of wifi hotspots ...when traveling..
On the ICS builds, I get notification of an open hotspot, but no auto connect.
But on stock GB ....I get auto connect every time.
I can't remember if ICS has the auto connect toggle...but GB does ....at least in the hotspot system app.
If ICS ran as well for me ...I'd keep it....as I think flappjaxxx ICS build is far better than stock ...but between the dreaded lag and connection issues, I bailed out for a bit ...or until I get these connection issues fixed..
Maybe I should move ???.....LOL
gregsarg said:
Wifi setting for me is "always on "...
As I try to take advantage of wifi hotspots ...when traveling..
On the ICS builds, I get notification of an open hotspot, but no auto connect.
But on stock GB ....I get auto connect every time.
I can't remember if ICS has the auto connect toggle...but GB does ....at least in the hotspot system app.
If ICS ran as well for me ...I'd keep it....as I think flappjaxxx ICS build is far better than stock ...but between the dreaded lag and connection issues, I bailed out for a bit ...or until I get these connection issues fixed..
Maybe I should move ???.....LOL
Click to expand...
Click to collapse
I am on flapjaxx and haven't had any issues with auto connecting to any of my 'known' wifi's (5 of them as i move from site to site). It detects the at&t hotspots but doesn't connect (i actually never tried to connect ) so don't know about connect automatically. Might test it out next time i am close to McD's.
It's an att specific fuction using the hotspot app ...
If it's a wifi hotspot registered on the ATT network, then it auto connects when in range.
But I believe the UCLF6 upgrade pulled this feature out...
There is a similar app on the market from ATT too duplicate this in ICS ...but it's unreliable, and a battery hog for Me...g
I will look into when i am off work. Think i disabled it myself one of these go arounds of flashing. (think i was tired of it popping saying that it was available ). Want to see if i can duplicate it for you.
Mad383Max said:
I will look into when i am off work. Think i disabled it myself one of these go arounds of flashing. (think i was tired of it popping saying that it was available ). Want to see if i can duplicate it for you.
Click to expand...
Click to collapse
thank you .....g
Well, looks like i didn't uninstall or freeze it, so imust have not been near one recently. Or just getting old and forgetting it. There's one done street from where i am. Will stop by on my way out and see what happens.
Sitting in McD'sdrive-thru as i type. At&t hotspot popped and connected automatically. Had to shut wifi off because it was super slow.( Lte in this area usually pulls 40-50mb downloads)
Mad383Max said:
Sitting in McD'sdrive-thru as i type. At&t hotspot popped and connected automatically. Had to shut wifi off because it was super slow.( Lte in this area usually pulls 40-50mb downloads)
Click to expand...
Click to collapse
That is great news ...
So your good ??
I love it when a plan comes together ....LOL ...g
I don't have the wifi hotspot installed. This is happening to me at home with my home wifi network.
ElAguila said:
I don't have the wifi hotspot installed. This is happening to me at home with my home wifi network.
Click to expand...
Click to collapse
Oh.....thats right...I'm confusing my threads....sorry....g
Yeah, sorry if i hijacked your thread there. Was looking at what Greg posted.
Have you tried reflashing only the modem? Flapjaxx has some stickied in the dev thread or you can pull one from a pure stock and put it in an existing flash zip. That's what I had to do. I had all kinds of problems coming from GB to ICS with the radio. Once I found one that worked I made a zip and keep it just in case. Haven't had to use it yet but you never know.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
My wifi works great at my house and everywhere else. At work I keep getting Authentication error when it was working fine before I start using Jelly Bean. I have called HTC & Sprint but if anyone has had this issue and fixed it I would appreciate knowing what you did to fix the problem. I have tried deleting it, the dlna, even was given code form sprint to out in but still not working. Sprint wanted me to reapply update but wouldn't that kill my root? T/u for your help.
What environment are you in at your work? Such as authentication method?
wpa2
nhoodjr said:
What environment are you in at your work? Such as authentication method?
Click to expand...
Click to collapse
wpa2 and it was working before the JB upgrade.
kaw900r said:
wpa2 and it was working before the JB upgrade.
Click to expand...
Click to collapse
Same problem here. Works great on deck's cmx. So far nothing but authentication issues on my work wifi with every version of Deck's 10.1 IRC builds. Flashed latest 0206 last night and hoping for today
wpa2-static ip- 2.4
Well let me know if it works for you. Not being able to cnnect to wifi at work is not good.
kaw900r said:
Well let me know if it works for you. Not being able to cnnect to wifi at work is not good.
Click to expand...
Click to collapse
I had to say it I guess. It worked. kind of..Here's exactly how.
Initially on the latest Deck CM10 from IRC. Restored a sense build and did PRL update
I had a backup of Deck's IRC 2/6 build (2nd one I think--clean flash)
restored that and dirty flashed 2/7 over it.
Wifi connected instantly and stayed connected until I left for lunch. When I got back I got the same authentication error.
This time airplane mode on and off fixed it. Connected for the rest of the day.
Before this I had clean flashed most of Deck's 10.1 IRC builds and dirty flashed a few. All would connect everywhere except work. I can't say I tried the airplane mode thing on the 2/6 build, but did on most of the others.
Backing this one up before I flash anything!!
Hope to have wifi again tomorrow. My work is a cell signal cave and wifi triples battery life
Spoke too soon....not working today
worked on and off. Connected again when I left and came back
Sent from my EVO using xda app-developers app