I flashed a few different ROMs, but suddenly the SIM card isn't capturing any signal. I tried the SIM card on an old phone and it works fine. Is there something I can do without buying a new SIM reader for it?
Hm, what different ROMs have you flashed? Have you tried going back to stock via ODIN?
I have a suspicion that you flashed a ROM build that has an issue with losing baseband/imei. Please list the ROM and build date that caused the issue.
Sent from my SGH-T959 using xda premium
If it is not an IMEI issue, try flashing a modem in recovery.
Here's the story. Some of the ROMs I flashed were ICS Passion, ICZen, and Doc’s Master ICS V12.1 (KB5) and I didn't like it so I flashed back to ICZen or Passion. One of them messed up the signal, but I don't remember which one. Anyway, I tried RemICS-JB after that, but it still did not have any signal, so I figured I flashed back to stock. However, after starting Odin it didn't progress for awhile so I exited the program. Then I resetted the phone and suddenly it was in a mode that that looked like this "Mobile .../ ! \...Computer" I found out that it was either soft-bricked or hard-bricked. Seeing as how I couldn't go into download mode with 3 buttons nor adb method, I decided that to have to make a jig. Then suddenly after trying this method for a bit,
http://forum.xda-developers.com/showthread.php?t=775911&highlight=usb+jig
I was able to start Odin and still have repartition ticked since I read that it would cause problems, but it didn't this time. The strange thing was that I was never in the original download mode(android with shovel). My screen still looked like this "Mobile .../ ! \...Computer" until I saw a blue dot at the bottom which happened to be the progress bar when I just clicked the START button on Odin after adding the PIT and PDA. On the other hand, I right-clicked and ran as administrator in Windows 7, so maybe that had something to do with it. Anyway, I'm glad it was able to flash it back to stock and the signal is back. I just have to root it again and flash ICZen or something. Let's hope it doesn't happen again haha.
FC3SRedSuns said:
Here's the story. Some of the ROMs I flashed were ICS Passion, ICZen, and Doc’s Master ICS V12.1 (KB5) and I didn't like it so I flashed back to ICZen or Passion. One of them messed up the signal, but I don't remember which one. Anyway, I tried RemICS-JB after that, but it still did not have any signal, so I figured I flashed back to stock. However, after starting Odin it didn't progress for awhile so I exited the program. Then I resetted the phone and suddenly it was in a mode that that looked like this "Mobile .../ ! \...Computer" I found out that it was either soft-bricked or hard-bricked. Seeing as how I couldn't go into download mode with 3 buttons nor adb method, I decided that to have to make a jig. Then suddenly after trying this method for a bit,
http://forum.xda-developers.com/showthread.php?t=775911&highlight=usb+jig
I was able to start Odin and still have repartition ticked since I read that it would cause problems, but it didn't this time. The strange thing was that I was never in the original download mode(android with shovel). My screen still looked like this "Mobile .../ ! \...Computer" until I saw a blue dot at the bottom which happened to be the progress bar when I just clicked the START button on Odin after adding the PIT and PDA. On the other hand, I right-clicked and ran as administrator in Windows 7, so maybe that had something to do with it. Anyway, I'm glad it was able to flash it back to stock and the signal is back. I just have to root it again and flash ICZen or something. Let's hope it doesn't happen again haha.
Click to expand...
Click to collapse
Always run Odin with administrator privileges. I'm not sure if that's what cause your troubles but it's always good practice.
Remics JB will cause loss of baseband. This has happened from time to time with some ROMs. If it happens again, just Odin back to stock to fix. You had a soft brick, good job on recovering it!
Sent from my SGH-T959 using xda premium
Related
So today I finally took the leap and flashed my phone (I've had it since it launched). I flashed it with Axura 2.2 and everything went great. I was playing around with it for a few hours, then I got greedy and decided to add the Voodoo lag fix, and this is where things got messed up. Basically, it didn't take, i got a female robot voice telling me I didn't have enough space available. So after that the phone was still working as normal, but I lost all my info saved in the internal memory and the phone started acting weird and wasn't booting up properly. So I did some reading and came to the conclusion that i should go back to stock and start all over again.
That's where I'm stuck right now. I'm trying to use Odin to restore to stock, I downloaded all the necessary files, and entered them into the proper fields in Odin. But, when I connect the phone (In downloading mode) it doesn't say [com7] in Odin like it's supposed to, it says [com3] instead.
And that's where I'm stuck at. Any idea where I screwed up and how to unscrew it up? Thanks....
Redo it com can be anything a long as it connects and stays connected you did it right from what I understand
Nerov3 voodoo
Hotstuff5964 said:
So today I finally took the leap and flashed my phone (I've had it since it launched). I flashed it with Axura 2.2 and everything went great. I was playing around with it for a few hours, then I got greedy and decided to add the Voodoo lag fix, and this is where things got messed up. Basically, it didn't take, i got a female robot voice telling me I didn't have enough space available. So after that the phone was still working as normal, but I lost all my info saved in the internal memory and the phone started acting weird and wasn't booting up properly. So I did some reading and came to the conclusion that i should go back to stock and start all over again.
That's where I'm stuck right now. I'm trying to use Odin to restore to stock, I downloaded all the necessary files, and entered them into the proper fields in Odin. But, when I connect the phone (In downloading mode) it doesn't say [com7] in Odin like it's supposed to, it says [com3] instead.
And that's where I'm stuck at. Any idea where I screwed up and how to unscrew it up? Thanks....
Click to expand...
Click to collapse
Any com is fine mine mostly shows 3 but once in a, while 5
No worries its the same
Sent from my SGH-T959 using XDA App
voodoo has been giving my phone issues as well. argh!
Anyway, like xrider said, I believe any COM is fine.
Odin won't do anything for me with [com3]
I actually got it go to [com4] earlier, Odin did it's job and completed. Once I rebooted the phone, it still wasn't right. It opened up to that screen where you use the volume buttons to move, then press power to enter, like if it was still rooted. I clicked on reboot and it started back up like normal. So I was getting ready to flash axura again, I downlaoded OCLF, titanium, and rom manager again. But when I clicked on the OCLF app, EVERYTHNG was unavailable. So I figured I would try and restore to stock again. And, now I'm stuck there again. I'm getting the [com3] thing again, the phone is in downloading mode of course, but now, i have some red letters on top of the screen that say, "keypressed, 164"
:\
I'll give you my two cents since I had to learn about ODIN the hard way earlier this week. It doesn't matter what com port it shows (mine showed com1 I think, but never 3 or 7). I know you said you were going back to stock, but does that mean your are going back to JFD, or something else? Do you have the 512 pit and the right tar file? Are you repartitioning or not? I certainly don't have all the answers, but it's still a little too fresh in my head to forget. Also once you get back to root, I would highly recommend Nero v3 (I don't run Voodoo. Haven't really understood the advantages/disadvantages, plus it seems like it could be over my head), it's a really great ROM and some of the new mods are starting to come out.....
I was gonna post up some pics of what I'm looking at, but I cant because I don't have enough posts yet! Guess I better whor3 it up!
gtiryan said:
I'll give you my two cents since I had to learn about ODIN the hard way earlier this week. It doesn't matter what com port it shows (mine showed com1 I think, but never 3 or 7). I know you said you were going back to stock, but does that mean your are going back to JFD, or something else? Do you have the 512 pit and the right tar file? Are you repartitioning or not? I certainly don't have all the answers, but it's still a little too fresh in my head to forget. Also once you get back to root, I would highly recommend Nero v3 (I don't run Voodoo. Haven't really understood the advantages/disadvantages, plus it seems like it could be over my head), it's a really great ROM and some of the new mods are starting to come out.....
Click to expand...
Click to collapse
I don't even know what JFD is When i said stock I meant to well.... stock, like out of the box. I think I have all the right files, I got them off a post here on XDA. As far as repartitioning, I've read to do it, and not to do it, so I've tried it both ways. I might give that Nero v3 a chance. I was really impressed with Axura 2.2. But like I said, I got greedy and added Voodoo-doo
Well I figured out part of my problem, I was using an outdated version of Odin. I was using 1.0, I upgraded to 1.7 and it worked and reset my phone. The only problem I'm still having is, the phone feels like it's still rooted. Do I have to manually unroot it, to get it back to normal? Also, when I open the OCLF app, NOTHING is available to chose from, everything is in red. And lastly, when I hook it up to my pc, it doesn't show up in my computer.
Hotstuff5964 said:
Well I figured out part of my problem, I was using an outdated version of Odin. I was using 1.0, I upgraded to 1.7 and it worked and reset my phone. The only problem I'm still having is, the phone feels like it's still rooted. Do I have to manually unroot it, to get it back to normal? Also, when I open the OCLF app, NOTHING is available to chose from, everything is in red. And lastly, when I hook it up to my pc, it doesn't show up in my computer.
Click to expand...
Click to collapse
How does the phone feel like its still rooted? If its still rooted you should see the superuser app in the drawer or you can d/l the terminal emulator app from the market and type su. SU will tell you if you have root or not. Aslo try a diffrent usb port on your pc, that happens to me once and a while.
badaphooko01 said:
How does the phone feel like its still rooted? If its still rooted you should see the superuser app in the drawer or you can d/l the terminal emulator app from the market and type su. SU will tell you if you have root or not. Aslo try a diffrent usb port on your pc, that happens to me once and a while.
Click to expand...
Click to collapse
Ok, I was making a mistake, it wasn't rooted after the reboot. It's just something doesn't feel right.
I restored with Odin again, so that's all good. I want to try out Nero v3 this time, like was suggested earlier, the problem I'm having now is, I'm having a hard time downloading from the market. I'm trying to download ROM Manager from the market, but it just says "starting download" and nothing ever happens.
Back in business! Flashed it to Nero v3, this is thing is FAST baby!
Yeah buddy!
I've saved a couple i9000 Odin flashed Fascinates with this method so it should work.
First, grab my DI01 All in One. You need an all inclusive package.
http://adrynalyne.us/files/kernels/DI01package3.tar.md5
You will need odin3 v 1.30. Google for it.
You also need Heimdall.
Heimdall – Glass Echidna There is a readme in the windows version zip if you get stuck. Drivers must be installed for it as well.
You also need a copy of the samsung galaxy s usb drivers, because Heimdall will remove them when you use it.
[Drivers] MS Windows x86 and x64 USB Drivers for Samsung Galaxy S - xda-developers
You will also need a PIT file from me:
http://dl.dropbox.com/u/2056318/atlas_v2.2.pit
Steps:
1. Install Heimdall and drivers.
2. Put phone in download mode and plug it in to usb cable.
3. Unzip the Odin file. 7zip can do this, but will give an EOF error. Ignore the error.
4. Choose each section in Heimdall and add the appropriate file, including PIT. Check repartition. Primary boot loader is boot.bin and secondary boot loader is sbl.bin.
5. Start. Boot once, check for problems. If problems persist, continue.
6. Reinstall Samsung USB drivers for Odin. This may require a PC reboot.
7. Put phone back in download Mode and start Odin, making sure its detected.
8. Load the entire Odin package, not extracted into the pda section of Odin. Include the PIT file. CHECK repartition.
9. Run the process.
If all goes well, you should be back to stock, crappy Eclair 2.1 without force close errors.
On a whim last night I flashed cm7 from kaoscinate. It wasnt what I wanted (nothing worked except calls data and sms), so I tried to go nack to sc 2.4. And of course I was bricked. But I just odined the eb01 radio and voila, I was ok.
Not sure if that helps.
Sent from my SCH-I500 using XDA App
i went to cm7 from sc 2.4 aswell, and to get back to sc 2.4 i just flashed cwmfroyo edition through cwm, rebooted the recovery then wiped data, re-installed sc 2.4 and bam! i was back.
upsidedownaaron said:
On a whim last night I flashed cm7 from kaoscinate. It wasnt what I wanted (nothing worked except calls data and sms), so I tried to go nack to sc 2.4. And of course I was bricked. But I just odined the eb01 radio and voila, I was ok.
Not sure if that helps.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I wouldn't say you were bricked. Bricked means the phone no longer functions period, no matter what you do to it. But I'm glad this helped you. I'll probably use the DL09 All in One and then flash SuperClean back over that.
When you flash an All In One, you are taking your kernel and your radio (modem) back to that version as well. When you want to go back to Froyo or whatever, make sure you flash the radio along with whatever else your flashing.
Boot looped. Wouldn't get past Samsung logo. Not an uncommon problem for me. I have become very comfortable with Odin.
Sent from my SCH-I500 using XDA App
upsidedownaaron said:
I have become very comfortable with Odin.
Click to expand...
Click to collapse
haha yeah. It's saved me but a couple times mostly anytime voodoo is involved. Tried restoring a nandroid backup of EB01 after flashing CM7 and got force closes from hell. Odin'd back using the EB01 unbloated/deodexed.tar and everything booted fine. Tried to restore the nandroid and couldn't do anything because of the force closes. Think I have corrupt data somewhere though. I also made a backup of the apps and data in MyBackupPro and ended up in the same force close situation upon reboot after restoring all. Selectively restoring a couple apps worked fine. Oh well.
Basically, I can't sustain a data connection for longer than about a minute before my fascinate disconnects. It takes about a minute to reconnect, then it disconnects again. Over and over and over. It never affects phone calls because it's not losing signal, it's just dropping the data connection.
I've been poking around my phone a bit, and in the past week, but I can't pinpoint what I did that made this start happening. I was hoping this thread would save me, but it didn't. I went back to DI01 using heimdall, booted up, still had the same problem. Reflashed with Odin, same thing. Went back to SCv2.4 with EB01 modem, same thing.
I ask this in this thread because I'm wondering what part of the phone remains untouched even with the full DI01 flash? Like some kind of low-level device mode that I triggered?
If there is nothing then it must be hardware related, and I will get a replacement.
@gizmo, maybe its time to start all over again with adryn's full di01 odin restore. i have had to do that twice now. and it has saved my butt.
i have become pretty familiar now with rebuilding my entire phone. it only takes about an hour now to go from a rom i like, to soft bricking it and then back to the rom i liked before i soft bricked with another alpha i just couldn't seem to wait to try.
Why does the movinand.bin fail when using Odin?
upsidedownaaron said:
@gizmo, maybe its time to start all over again with adryn's full di01 odin restore. i have had to do that twice now. and it has saved my butt.
i have become pretty familiar now with rebuilding my entire phone. it only takes about an hour now to go from a rom i like, to soft bricking it and then back to the rom i liked before i soft bricked with another alpha i just couldn't seem to wait to try.
Click to expand...
Click to collapse
Sounds pretty familiar . I always have to be breaking my stuff to be happy.
I've done the full heimdall DI01, followed by full Odin, to no avail. I think I messed up something with the service programming on the phone, but reactivating it doesn't help. None of the factory reset options I've tried have cleared the activation settings back to stock. Anyone know how to accomplish this?
I suppose I should move to my own thread now.
Hey All,
I've been looking for an answer for over a day now, but can't seem to find anything about my specific problem. Here's what happened:
I had flashed to ICS 4.0.3 on my Samsung Vibrant about a month ago and everything was working great until yesterday when I woke up to find the "Encryption Unsuccessful" screen on my phone. I did a little research to find out that there is a fix to this and to NOT reset the phone. So, I took the steps to ODIN the phone back to Stock Eclair in hopes that starting from the beginning again would be easiest way to fix the problem. The ODIN process finished completely fine (PASSED), but now when it reboots, I only get to the first "Vibrant" screen, then it shows the battery and spinning circle icon. Apparently it won't fully reboot. I've tried to ODIN it back to stock several times, and I keep getting the same results. I can get it into download mode and plugged into my computer, but that's about it.
From the posts I've read, it sounds like my phone might still be okay to recover since it does power up, but I can't seem to find a solution to get it fully back up and running.
Any help/recommendations would be greatly appreciated!
Thanks in advance!
Maybe your JFD file is corruption. Check with your MD5 sum if there any error or mismatch.. Just give you an idea.BTW what Odin are u using. I recommend Odin 1.7 I stay away the older Odin or the newer Odin
You are screwed.
Sorry to tell you this but i had the exact same problem and found no solution whatsoever to fix the phone. I finally gave up and bought a Galaxy Nexus. You can try flashing Eugene's Unbrickable Froyo Rom which is flashable through odin as a .tar package along with the pit file. You might be able to fix it but i highly doubt it. I flashed Eugene's rom and got the same results as you described. By any chance did you click "Reset Phone" when the "Encryption Unsuccessful" showed up? If so well yeah your phone is pretty much paperweight as of now...until someone finds a solution. Like you i am also able to access download mode. So i guess there may be a way to fix your phone. Not saying it's impossible...hopefully someone finds a solution soon.
Here is the link to Euguene's rom: http://eb-productions.proboards.com/index.cgi?board=samsungsgs&action=display&thread=8
Good luck.
OP, what ROM were you running (specifically. Not just ICS 4.0.3-what is the name of the ROM)? Also what kernel?
Since you are not the only one this happened to, I would like to know the above and see if it correlates to the others that this happened to in the Vibrant section. I'll post the same in their threads too.
Check here out for a possible solution/workaround.
Replacement Vibrant Coming
Thanks for your recommendations/help guys.
I decided to go to T-Mobile and complain and they are sending me a replacement phone. Apparently it's still under warranty, so it won't cost me anything, and if my data is lost, then so be it...at least all my contacts will still be in tact through my Google account.
Merio - I did NOT hit the Reset Button when I saw the Encryption Unsuccessful screen. Before doing anything I did a little research and I found a forum here on xda that said to not hit that button, and tried to explain a way to fix it using the Heimdall One-Click. Basically it sounded like I'd be flashing back to a Gingerbread ROM. So, instead I just went ahead and tried to flash back to stock Eclair. The results of that were obviously not good.
Woodrube - I was running the Passion 13 ROM (ICS 4.0.3). Was really enjoying it until I got the Encryption "Screen of Death"
I don't know what Kernel it was, actually, I don't really know what a Kernel is...
Thanks again guys. Hopefully I'll be up and running on my replacement phone soon!
Last night I went to reboot into recovery and my phone now sits at the Galaxy S2 splash screen and won't boot up. Tried plugging it in powered off and it won't even go into charging mode. The battery picture just comes up and the little spinning wheel keeps going.
So Ive been trying for the last hour to reflash the phone back to stock using both Entropys return to stock guide as well as the 'How to return your phone to the store' guide too and no luck.
Heimdall of course as always just flat out doesn't work so I hooked it up to my laptop and ran Odin. Odin connects to the phone fine and the box turns yellow, but the minute I hit start, it just gives me this:
<ID:0/008> SetupConnection..
<ID:0/008>
<OSM> All threads completed. (succeed 0 / failed 1)
I even tried the one click ICS leak from Rootzwiki and the same thing.
I can get the phone into Download mode no problem but man I cannot get it to flash ANY of these rome!!
Any advice or should I just take it to an ATT store on the way home from work??
I got it around the second week of February so hopefully worst case scenario I can still exchange it..
Im at my wits end here, can't do anything with it!!
I had same problem with my sprint Gs2, I took it into the store they told me since I rooted they couldnt help me. But the guy said go into download mode and root it again, it will remove anything and everything off it. Idk if that's what you want though. It got my phone back up and running
Sent from my SPH-D710 using xda premium
Ahh forgot to add I can't get into Recovery anymore.
No clue what happened. I can get it into Download mode but not Recovery.
If I could've gotten into Recovery I could've just flashed my Nandroid last night and fixed it hehe..
ODIN requires Download mode, not recovery mode. If your phone can indeed go into download mode as you claimed, you should be able to flash any ODIN flashable ROMs.
Try flashing just a kernel with recovery
Sent from my GT-I9100 using Tapatalk 2 Beta-2
You didn't say what you were running before the problem occured. Or if you did anything just before. Need more information to be able to troubleshoot the problem.
You might try flashing Entropy's DD kernel only with odin. He has at least one tar in his DD thread OP.
It may be that one of the components, such as param.lfs is screwed, but it would be better to have more information first before just randomly trying to flash things.
You can find most everything you might need in the Download Repository.
creepyncrawly said:
You didn't say what you were running before the problem occured. Or if you did anything just before. Need more information to be able to troubleshoot the problem.
You might try flashing Entropy's DD kernel only with odin. He has at least one tar in his DD thread OP.
It may be that one of the components, such as param.lfs is screwed, but it would be better to have more information first before just randomly trying to flash things.
You can find most everything you might need in the Download Repository.
Click to expand...
Click to collapse
Yeah sorry about the lack of info hehe! I made the thread about 20 minutes before I had to go to work and spent the hour before that trying to fix it hehe.
Anyways, I WAS running the ATT ICS leak that Task and Fenny packaged up with CWM. I WAS going to get everything backed up and attempt to move over to CM9 when it went to crap.
So far what Ive attempted to flash with Odin was the following with no luck:
Entropys 'Return to Stock' PDA.tar (the UCKH7_stock_odin with root)
ATTGalaxyS2Unroot_SGH-i777.tar
The leaked ATT Odin one click flasher from Rootzwiki (same results as using regular Odin with any of the above)
I did in fact also download the I777UCKH7-CL503881-Parts-NoBL.7z from creepys 'How to prepare your phone for return to the store' thread BUT..
The instructions tell you to unpack the 7z and then run the one click .exe inside but there is no .exe in the archive. Just the modem.bin, cache.img, image, factoryfs.img, and hidden.img. This would've been fine to try but of course Heimdall is every Mac OS users enemy and anytime I try to use the front end I get a 'missing firmware.xml' error and running it via command line just never connects to the phone.
Since Entropys return to stock package only has the factoryfs.img and zimage, sounds like I need to find a complete tar file that has all the other parts that creepy's has in it..
Last thing I did before going to work was updating the USB drivers on my Win 7 laptop to see if that would help, but since I can only use my laptop via Remote Desktop Connection from my Mac (display is dead) I had to do a Windows Update so I could get the laptop to restart (which I don't think you can do through RDC unless I missed it), and I had to run to work before it finished..
And I was STILL 10 minutes late hahaha!
So the laptop JUST got rebooted now that Im home, Im going to go see if theres also a newer version of Odin, and Im gonna go dig through the Download Repository and also check that Samsung Firmwares site to see if I can find myself a complete tar ball of the stock 2.3.4 firmware..
Ive got Saturday off finally so if I can't get it flashed and fixed by then I think Im going to bite the bullet and just take it to an ATT store and see if they'll swap it. Hopefully theres no 30 day policy, because Im pretty sure my Blackberry crapped out on me about 2 months in and they had no problem sending me another in the mail.. I REALLY wish I had my MyBackup done on my external SD card and not the internal one.. Gotta put another 40 hours into grinding in all my Zenonias to get back to where I was hehe..
Slavestate said:
Yeah sorry about the lack of info hehe! I made the thread about 20 minutes before I had to go to work and spent the hour before that trying to fix it hehe.
Anyways, I WAS running the ATT ICS leak that Task and Fenny packaged up with CWM. I WAS going to get everything backed up and attempt to move over to CM9 when it went to crap.
So far what Ive attempted to flash with Odin was the following with no luck:
Entropys 'Return to Stock' PDA.tar (the UCKH7_stock_odin with root)
ATTGalaxyS2Unroot_SGH-i777.tar
The leaked ATT Odin one click flasher from Rootzwiki (same results as using regular Odin with any of the above)
I did in fact also download the I777UCKH7-CL503881-Parts-NoBL.7z from creepys 'How to prepare your phone for return to the store' thread BUT..
The instructions tell you to unpack the 7z and then run the one click .exe inside but there is no .exe in the archive. Just the modem.bin, cache.img, image, factoryfs.img, and hidden.img. This would've been fine to try but of course Heimdall is every Mac OS users enemy and anytime I try to use the front end I get a 'missing firmware.xml' error and running it via command line just never connects to the phone.
Since Entropys return to stock package only has the factoryfs.img and zimage, sounds like I need to find a complete tar file that has all the other parts that creepy's has in it..
Last thing I did before going to work was updating the USB drivers on my Win 7 laptop to see if that would help, but since I can only use my laptop via Remote Desktop Connection from my Mac (display is dead) I had to do a Windows Update so I could get the laptop to restart (which I don't think you can do through RDC unless I missed it), and I had to run to work before it finished..
And I was STILL 10 minutes late hahaha!
So the laptop JUST got rebooted now that Im home, Im going to go see if theres also a newer version of Odin, and Im gonna go dig through the Download Repository and also check that Samsung Firmwares site to see if I can find myself a complete tar ball of the stock 2.3.4 firmware..
Ive got Saturday off finally so if I can't get it flashed and fixed by then I think Im going to bite the bullet and just take it to an ATT store and see if they'll swap it. Hopefully theres no 30 day policy, because Im pretty sure my Blackberry crapped out on me about 2 months in and they had no problem sending me another in the mail.. I REALLY wish I had my MyBackup done on my external SD card and not the internal one.. Gotta put another 40 hours into grinding in all my Zenonias to get back to where I was hehe..
Click to expand...
Click to collapse
Add me on gtalk and we can see what we can do [email protected]
At this point I don't know if anything will help heh.
All it will do is either sit on the GS2 boot screen, or it will go into Download mode.
Download mode though, no luck so far. Odin just won't flash it for some reason. It sees it, the COM port box lights up yellow, but the minute you hit Start, it just goes right to that error message I posted above. After this, I have to close both Odin and disconnect the phone and reboot it into Download mode.
I went through the Download Repo. Tried I777UCKH7-CL503881-Full.7z, and even the param.ifs by itself but everything just gives the same result. I didn't try Entropys DD though since I was running the stock ICS and didn't want to really mess anything up. Only thing I can think of left to try is flashing Task/Fennys CWM modded stock ICS kernel but after all this I doubt its going to work. I tried the stock rooted GB kernel earlier and it didn't bother flashing either.
Am I maybe connecting it wrong? I have the battery pulled and am going into Download mode by holding the vol buttons and connecting the usb cable to the laptop. I don't want to kill the battery power I have left as it won't charge now either. Basically I just fire up Odin, connect the phone and put it in Download mode, select my tar file and put it in the PDA slot, hit Start and go.. Should I be doing anything differently??
Whenever I've had a problem with Odin like that, it has always been that some partition got flashed wrong/partially/corrupted, and the only fix was to reflash the damaged partition. As long as Odin is seeing the phone, then it must be either a software/firmware problem or a hardware problem. I'm still thinking it is firmware, but it seems to be outside my experience.
I havn't been playing with ICS yet, but I have noticed that there have been a number of reports similar to yours, where people have flashed some flavor of ICS. This supports the idea that it is firmware. I have always understood that if the problem is firmware, and if the phone can boot into download mode, it can be recovered.
Yeah Im wondering if I should try flashing the PIT file I have for the phone, but I don't know crap about partitioning these things and didn't want to really mess it up.
Guess at this point its worth a shot. I was about to go sit and chat with the warranty folks at ATT (mines a refurb so Ive only got til the end of the month before warranty s up). Maybe Ill try the pit file and let Odin repartition the thing. I can't flash a firmware back onto it anyways.
EDIT: Holy crap progress.. I flashed the stock secondary boot loader with Odin (in the Bootloader slot) and that actually flashed. Now I just reconnected it and decided to try the ATT ICS leak one click from Rootzwiki and it appears my phone is now flashing!!!!! As long as my crap is still on the internal usb storage today is gonna be a good day hehe! Yep all is well so far! Phone just rebooted and its now at the ICS setup screen! WOOHOO!!! Crisis averted!! Thanks guys for the comments and help! Creepy thank you for reminding me we have that repository!!
Now I know this question, in general, has been asked a lot. I've literally searched and tried the solutions in other threads, but this phone might be beyond help. I just want to know if someone has another solution as to how to revive this phone. I honestly think my situation is different than most....I downloaded and installed Team Hacksung's ICS 4.0.3 Build 6.1 ROM and I was using it just fine for a couple of months. Everything was working the whole time. Today, I am browsing through my local news station's app and my phone freezes on me! I pulled the battery and restarted the phone. It boots up fine and gets to the startup screen with the time and the screen lock. I did notice right away that the digitizer screen was not responding to my touch because I could not slide my lock over to get into my phone. I tried a few more soft resets and still nothing. I did notice, however, that the soft keys at the bottom did respond to my touch and they blinked and provided haptic feedback, so at this point I'm thinking it shouldn't be a problem with my digitizer. So I took the battery out then put the phone into recovery and wiped data, cache and dalvik. Then I rebooted the phone once again and still no response to touch at the home/lock screen. I then proceeded to try to reflash the same ICS ROM all over again and that's where the problem started. I can get into download mode and I've already tried to load stock froyo and stock gingerbread, but nothing works. My phone will not go past the "Samsung" boot-up screen. I've already tried several other forums' threads on how to recover a bricked Fascinate, but no matter what I try to load with Odin, Heimdall or anything else, my phone won't load past the Samsung screen. I can get into Download mode and that's it. My phone will not go into recovery using the 3-finger method. When I run odin I get a success message each time. I've even tried to heimdall the files individually and even tried to reload the stock kernel. The other problem I am running into is a lot of the links on these sites are all broken so I am unable to get the files I need. Has anyone else ever had this problem?
Edit: P.S. When the phone is off and on the charger, the grey battery shows the "loading" circle (whatever you call it) in the middle of it, but never converts to showing the green bars moving up and down indicating the battery is being charged. The loading circle is also frozen and does not spin.
im dizzy after reading a few sentences lol...check out my guide in the general section.
droidstyle said:
im dizzy after reading a few sentences lol...check out my guide in the general section.
Click to expand...
Click to collapse
Are you referring to http://forum.xda-developers.com/showthread.php?t=1238070?
If so, I just did it and it won't go past "Samsung."
Did you do check repartition and use the atlas pit file? That would be key, I believe, in returning you properly to stock.
Droidstyle's guide has all the working links you'll ever need.
http://forum.xda-developers.com/showthread.php?t=1238070
jawman27 said:
Did you do check repartition and use the atlas pit file? That would be key, I believe, in returning you properly to stock.
Droidstyle's guide has all the working links you'll ever need.
http://forum.xda-developers.com/showthread.php?t=1238070
Click to expand...
Click to collapse
I did check re-partition and yes I did load the atlas pit file. Still nothing.
e
So you tried heimdall? What commands did you do? and what rom?
also which links were dead that you needed?
mvmacd said:
So you tried heimdall? What commands did you do? and what rom?
also which links were dead that you needed?
Click to expand...
Click to collapse
I used heimdall front end to load DI01 files, I didn't use any commands. Also, I was just referring to "Unbrick your samsung fascinate" threads on other websites. A lot of the links I found were outdated or broken.
yea unfortunately not many guides have working links these days...Mine is about the only one left that is kept up to date. Im very suprised a full odin session did not fix your issues. One thing left to try is to odin a older stock package like DL09
Found here:
http://forum.xda-developers.com/showthread.php?t=1526488
Just tried pushing the DL09 file in odin AND in heimdall and neither worked. I still get stuck on the "Samsung" boot and it goes no further. Can't even get into recovery....
I think I truly have a brick...
kinna long shot
but why not try a different PC and a new or different cable.
believe me a faulty cable did me in, a week back and i was sure at the time that my phone is gone, but then it wasn't as bad as the impression i am getting from your description.
all the best with this , and hoping that something solves this issue.
god bless
haoleflip said:
Now I know this question, in general, has been asked a lot. I've literally searched and tried the solutions in other threads, but this phone might be beyond help. I just want to know if someone has another solution as to how to revive this phone. I honestly think my situation is different than most....I downloaded and installed Team Hacksung's ICS 4.0.3 Build 6.1 ROM and I was using it just fine for a couple of months.....
Click to expand...
Click to collapse
I am having a similiar problem now. I was able to odin an older CWM (3.0 blue I got somewhere). From there I mounted usb and loaded ext4_formatter_all.zip. I ran this script and odin'd dh03 and finally got back to stock. That's where I am now.
Hope this helps
kduffman said:
I am having a similiar problem now. I was able to odin an older CWM (3.0 blue I got somewhere). From there I mounted usb and loaded ext4_formatter_all.zip. I ran this script and odin'd dh03 and finally got back to stock. That's where I am now.
Hope this helps
Click to expand...
Click to collapse
I have a blue recovery [3.x, voodoo], here it is if the OP wishes to try it.
[Use Heimdall and select recovery]
cwm3_voodoo-blue.bin http://www.mediafire.com/?4ls06x8gha88vtp
cwm4-bml-i500-fascinate.bin http://www.mediafire.com/?2ny1ql66yh69bn3
35c31418dbe9a9db70de954cdf7369ef cwm3_voodoo-blue.bin
05f3e376ca697fd0fb8700dea05254aa cwm4-bml-i500-fascinate.bin
I threw in an extra 4.x cwm for good measure, lol. [I saved these in a folder in case I ever needed them..I was going to delete the folder since I upgraded to THS ICS rom (build 7.1), but I decided not to delete them for some reason]
it seems OP sounds like he knows what he is talking about, but lets start simple.
Have you tried going all the way back to 100% stock?
In droidstlyes FANTASTIC guide
do section 5, perhaps try with out repartition or the atlas....that has worked for me in the past.
I know on my THS ICS 7.1 build i had a "sleep of death" (wouldnt wake up) and i was lazy and did the 3 finger salute and it would ONLY boot into CWM. a battery pop would have been fine but like i said i was lazy. i had to Odin back to stock in order to re-flash everything. [luckily i had a nandroid from a few days earlier]
Good Luck
Edit: I have never seen or heard of a fassy that CAN get into Download mode and not be recovered to 100% functional.
I'm just thinking out loud here, but here are two things to consider. Perhaps the senior members will comment.
1. Have you considered flashing a different bootloader?
2. Is it possible you have a corrupt stock and/or pit file? Have you tried re-downloading them and giving it another go?
OP, can you post the md5sums of the files, along with the filenames that you are using in Odin/Heimdall?
thanks
Well, I ended up getting a droid bionic from a friend, so I will turn this fassy into a project phone. If I can get it to work I will sell it or keep it for backup. Anyway...
I have not tried the older blue recovery yet. I will try that when I get back to my computer. It seems like I've gone beyond anything I've ever had to try with this phone. I read on one thread that if odin did not work, keep trying heimdall over and over until the phone boots up. I must have tried at least 8 times on one run. It still won't go past samsung screen. I can get into download just fine. No matter how many different cwms I try, I can't get into recovery using the three finger method. Im pretty knowledgeable when it comes to this stuff and I didn't flash the wrong rom or kernel or anything like that. I was running smoothly on an ics rom until my phone froze. I did have it overclocked with ns tools, but not at the time the phone froze. I honestly don't think its hardware related, but merely a glitch in the software or a bad kernel that does not want to come out? I have no clue....help me revive this baby lol...
Sent from my DROID BIONIC using Tapatalk
jawman27 said:
I'm just thinking out loud here, but here are two things to consider. Perhaps the senior members will comment.
1. Have you considered flashing a different bootloader?
2. Is it possible you have a corrupt stock and/or pit file? Have you tried re-downloading them and giving it another go?
Click to expand...
Click to collapse
I've tried different pit files from different threads. Even the one from droidstyle's thread. I've also tried different versions of the following stock files from different "known" and trusted sites: DI01, DL09, ED01, EB01, EH03, CM7, CM9 other ICS roms and different kernels that suit each both voodoo and non voodoo. And excuse my newbness on the terms, but what do you mean by flashing a new bootloader?
Sent from my DROID BIONIC using Tapatalk
haoleflip said:
... but what do you mean by flashing a new bootloader?
Sent from my DROID BIONIC using Tapatalk
Click to expand...
Click to collapse
Bootloaders can be flashed in Odin the same way a ROM can. A bootloader is the rudimentary software that gets the other software up and running. When Glitch's kernel started requiring Gingerbread bootloaders for complete functionality, a lot of us realized that just having GB didn't mean you had GB bootloaders.
http://www.mediafire.com/?fqojvsynkff93hc
Hopefully this link will work. It's certainly worth a try. It doesn't seem like you have much to lose. I'd recommend flashing it the exact same way you do a ROM. There's a bootloader section in Odin, but most people avoid it. Good luck.