Related
I've got an aux input in my car, and today when I tried plugging in my GSIII, I got met with a faint but annoying whistling sound underneath my music.
It stops if there's no sound being sent over the wire, but the moment a notification (or music) starts playing, it comes up.
Car worked fine with my DX, and still works fine with my friends' iPhones, but I get the stupid sound with my brand new galaxy siii. Oddly enough, it works fine with headphones.
any ideas guys? I'm kinda stumped.
Search ground loop isolation. You are getting dirty power to your phone.
Sent from my SPH-L710 using xda premium
none
Do you have the phone charging through the cigarette lighter? You can get ground noise from there, and it will be transmitted through the phone to your stereo.
Hm. Let me try again without it charging, but that's strange. Why did my old DX not experience this?
Assuming that's the issue - will a different cable solve the problem?
edit: So I checked the phone without plugging it into the charger. Still get a whistling noise. It's really more like a high pitched hum. I notice that if I don't plug the plug in all the way it doesn't happen (but I think I only get one channel).
I'm getting the same thing, and it's driving me crazy. At first I thought my brakes were going bad in my car!
I've tried different audio players and apps, but it still always get the noise. The phone is not charging, and I did not get this with my old captivate either.
Any ideas?
Doesnt happen in my Porsche. I'm using Bluetooth audio though.
Sent from my SGH-T999 using Tapatalk 2
Thats strange. I will get that when charging, but only while nothing is playing.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
I am having the same issue. First time experiencing it though; never heard it with the iPhone, HOX, or NS
I'm using a line in cable, and when i jiggle it, i can hear the noise change tone at the same time. I have a feeling it might be because it's a regular stereo cable and the microphone combo jack on the phone is not working right with it. But that's just a guess.
It's pretty annoying and its making the phone unusable as a music player.
Happens in my Lamborghini (Dodge Caravan) when using a MP3 player. Usually, if I run my hand down the cable it clears as though it's some kind of static build up in the cable.
Sent from my Transformer TF101 using xda premium
try flipping the cable (putting the aux in side into the phone and the phone side in the aux in) it happens to me sometimes and if I flip the cable it clears it out I couldn't tell you why though. also make sure there isn't any dust in the ports or on the cable ends.
That noise you hear is most likely due to the electrical system in the car. I rent cars all the time for work and never know the shape the electrical sys is in so to resolve the issue I bought a Kensington Cable from amazon and now have CD quality sound from any music app including pandora & spotify.
Hope this helps.:cyclops:
rmelendez3 said:
try flipping the cable (putting the aux in side into the phone and the phone side in the aux in) it happens to me sometimes and if I flip the cable it clears it out I couldn't tell you why though. also make sure there isn't any dust in the ports or on the cable ends.
Click to expand...
Click to collapse
Unfortunately, my cable is RCA on one side (L+R channels split) and regular 3.5mm on other.
nyciz said:
That noise you hear is most likely due to the electrical system in the car. I rent cars all the time for work and never know the shape the electrical sys is in so to resolve the issue I bought a Kensington Cable from amazon and now have CD quality sound from any music app including pandora & spotify.
Hope this helps.:cyclops:
Click to expand...
Click to collapse
Not sure what you mean by "the electrical system" and the "shape" of it. Could you clarify? As I said, I have no problems with other devices in this car.
I would usually suspect something wrong with the car, or maybe a ground loop, but I can plug in my Galaxy S (Captivate) or iPod with the same cable, same everything, just switching out the phone, and the noise goes away.
The way the noise cuts in and out between songs, and when I close the music app, it seems to only happen when the audio chip is getting a signal or is being energized. This is making me think that it may just be a noisy chip :crying:
I was on conf call with SGS3 plugged to AUX, no power charging was going on. And either noise canceling didn't work, or noise was getting in thru AUX line to receiving end. I didn't have problems listening, but ppl on the other end complained, and I had to mute the mic.
:crying:
cashyftw said:
doesnt happen in my porsche. I'm using bluetooth audio though.
Sent from my sgh-t999 using tapatalk 2
Click to expand...
Click to collapse
sorry! Could you speak up please? I couldn"t hear you over the sound of your e-penis
I am having the same problem. My HTC Thunderbolt never had this problem. Same car and cables, I get the hissing and popping until I play something. Then it goes away until I stop the music and then it comes back again. Weird and disappointing.
The problem comes from the 4-pin (TRRS) audio jack in the GSIII combined with presumably bad grounding in my 2007 Honda Accord, or the Aux adapter.
I fixed it with a simple DIY solution. I cannibalized a TRRS headphone jack and bought a TRS (3-pin) port from radioshack. I clipped off the jack with a generous portion of wire, then stripped them and cleaned them from their insulation (they are covered in insulating dye).
I connected 3 of the wires to the TRS connector, and taped the whole thing up. No more hum.
Also known as Road Noise. Where the power cable and audio input are too close to each other. Electrical current emits a small magnetic field which will hinder audio quality and promote road noise from the alternator.
This is a very typical senario in car audio install, when you run the power cable and rca right next to each other.
this buzzing noise happens to me every time i drive my car for the past 3 years:
solution: turn down the car volume. if you keep your car volume half-way, then you wont hear it as much, or you wont hear it at all.... you can make the phone volume as loud as you want though. also, as you accelerate faster, the noise gets louder. watch, try it.
To who ever can help...I'm experiencing an ongoing problem with headphones on my m8. Trying to listen to music is either one sided (left bud) or none at all. If I plug into my stereo, the Jack works and music is played normal. Coming from headphones to stereo, it goes one sided (even playing through the stereo).
I've changed ROMs with full wipe & clean install, the problem still occurs. Various headphones all do the same. I'm almost positive it's a software glitch somewhere but can't find a setting for it. I've tried freezing music apps with TB, I've also installed HK to see if that would tweak something. No clue what else to do.
To clarify, are you saying that using a line cable to connect the phone to your stereo receiver/amp plays both sides. But all headphones, it only plays on one side?
Correct...I CAN play music via aux cord but CAN"T play through headphones of any kind (I've tried three different ones).
Bump
Different headphones use different rubber moldings around the wires, especially near the plug. Some can be thicker and some have little plastic protrusions which prevent the cable from being fully plugged in. If the cable isn't fully inserted, you will sometimes receive no audio in the right ear or no audio at all. I have this problem with a pair of Sony earbuds on my S4 and my M8, and as a result, they're dedicated strictly to my laptop.
Try this...get a male to female aux cord and plug one end to the phone, then plug your headphones into that.
Also, you can try pulling back the plastic sheath around the plug and see if that helps.
slapdaddy said:
Try this...get a male to female aux cord and plug one end to the phone, then plug your headphones into that.
Also, you can try pulling back the plastic sheath around the plug and see if that helps.
Click to expand...
Click to collapse
I'll definitely try this out and see what happens. Its just weird because when I first got the phone the headphones worked (any and all). It wasn't untill I rooted that I started noticing an issue.
Or just cut a bit of the rubber off the edge of the headphones. With the case on my phone I had to do that for the aux jack in my car so that it would go all the way in. Of course only if they are your headphones and don't mind to do that.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
How about the headset that came with the phone? This shouldn't need any jiggering to make it plug in properly.
I would also agree with the notion that if you have a case on the phone, it may interfere with the headphone plugging in. Definitely try taking the case off (if you have one on) to see if it makes any difference.
Have you tried any headphones that don't have the microphone ("normal" headsets that aren't specially intended to use with smartphones)? Its just odd that a AUX cable works, and headphones don't. The only thing I can think that can be different is the hardware and software differences that are associated with the microphone (buttons, etc.).
Are there specific lines of code I can look at in the build .prop? I've gotten half the battle covered by Uninstalling HK and fixing permissions /wiping dalvik. Again music plays perfectly through stereo, whether aux, wifi or bt. One sided when headphones are used. There has to be some funky code going on.
I know this is old but did you ever find out?
hi guys, basicallynim wondering if anybody else is experiencing the issues that i am.
Essentially im ecstatically happy with my z2, except the headphone port seems faulty. While driving i use the 3.5mm jack on the z2 to connect tk the car.
This is when i noticed the faults with the headphone port. If i insert a 3 or 4 pid connector, either a 3.5-3.5 cable, a standard 3pin headphone connector, or a 4 pin headset, a slight nudge on the connector disconnects the headphones/cable and music stops. Sometimes, google now gets triggered as well. The same things happen if i twist the jack, whatever is connected. It also seems quite loose, and there is no positive click when a jack is inserted.
I would upload a video showing what happens, but my only video camera is in my z2.........
It has also not been submerged/wet at all, and is kept in a case (i tested the jack without the case as well, but it still happens)
In my brand new Z2 I also don't hear that click when inserting headphones but they are in the deep all the way. I tested 4 different earphones and speakers but none gave me any problems(I was twisting jack and trying to move it but connection was too tight), no loss of sound. I think you should get your Z2 serviced or replaced. Also I have a question. When you plug in normal headphones or speakers(not the noise cancelling ones), do you get a notification saying that you connected them or not? I only get something like this when Smart Connect is enabled...
I have issues with jack too. When you pulg in headphones, it sometimes wont recognize that something was plugged in, but if you try to twist the jack in the phone, it may get working (the sound is clear, no loss). The problem is when you put the phone in a pocket and walk, the jack is moving there so it is very likely to stop working and u have to twist it again.
When I bought the phone, I had no problems with it, but after first water test (which resulted fine, there was no water inside), the problem started.
Got the phone for 2 months and the issue still persists.
My solution is plugging in, search for the right spot before it starts worrking and walk with phone in a hand, holding the cable so it wont move in the jack.
i got it replaced in the end, had the new one for 2 weeks with no issues, so definitely a hardware fault.
Headphone jack not working after submerging in the water
Hi,
I submerged my xperia z2 last night in the swimming pool. It's been 12 hours since I submerged my phone. Every thing is running perfectly except for my headphone jack. The first time I used my earphone there's small amount of water coming out from the hole. The headphones is not working because it's not fully dried from water? I tried cleaning it up and blowing some air for some particles to get dry but it still not working.
I need help please because my phone is not insured because I bought it online
What should I do?!
I got my z2 last Tuesday and my headphones (Logitech UE 350) were working perfectly until I tried using them today. For some reason they aren't being recognized anymore and the music just keeps playing through the phones speakers.
I tried plugging them into my old iphone and they work fine. I also tried plugging in another pair (Shure SE215) into both phones and they work fine. Except on the z2 it makes a clicking sound whenever I change songs now.
Does anybody know any way to fix this? Or could it be a faulty headphone jack?
Could be a number of things mate. Firstly, check and see the headphones are not physically damaged and even make sure that the microhpones in the in-ear pieces aren't affected by water exposure. Next check the headphones out by moving the wire around while they're plugged in and see how the sound comes out and if the phone reacts to any movements. When I used my phone in water even after hours of drying the headphone jack still wasn't dry so even the slightest movement switched tracks etc. Alternatively, it could be a headphone jack fault in the sense that it may be shorting? Or the 3.5mm 5pin connector on the headphones itself is damaged. It could also simply be a software glitch. Go into "Sounds" in your settings and change what kind of accessory it detects the headphones as. Try "Other", it may solve your problems. Alternatively take it into a Sony store or a phone shop and see if there's anywhere with a similar headset which you could test out.
Nearly every time I plug in my headphones (there's no mic on them), this thing pops up. It was a "meh" at first, but now it's plain annoying. Does anyone know how to stop this screen from popping up?
I had this problem on the LG G3 and G4 -- Google Now or Voice Control pops up intermittently when using headphones or an audio cable. Purchase a set of headphones with a mic. I also had to buy an audio cable / mic for my car. This solved the problem. Cheers.
I'm having same problem when plug it to my car using aux cable. But never has this issue when plug it to my bose via aux.. Probably because my bose aux cable has mic?
Same thing happens for me.
It acts like there is some static when the cable plugs in as I can get the same effect if I spin the plug and get static.
Settings --> Smart Settings --> Accessory --> "When earphones plugged in".....
I hope this helps.
I have that setting turned off and I still see where google now pops up when I plug/static with my headphones.
Hello, I have the same problem with Google Now opening everytime I plug in my earphones. Is there anyway to stop this happening? I have Smart Settings turned off. Thanks.
Try touching the end to something metal to ground it. Worked for me.
It seems it has something to do with cheap aux cable? My aux cable in my car is pretty cheap one, the other one that i use with bose soundlink, bought in Japan.