Google now popping up upon plugged in headset - LG V10 Q&A, Help & Troubleshooting

Nearly every time I plug in my headphones (there's no mic on them), this thing pops up. It was a "meh" at first, but now it's plain annoying. Does anyone know how to stop this screen from popping up?

I had this problem on the LG G3 and G4 -- Google Now or Voice Control pops up intermittently when using headphones or an audio cable. Purchase a set of headphones with a mic. I also had to buy an audio cable / mic for my car. This solved the problem. Cheers.

I'm having same problem when plug it to my car using aux cable. But never has this issue when plug it to my bose via aux.. Probably because my bose aux cable has mic?

Same thing happens for me.
It acts like there is some static when the cable plugs in as I can get the same effect if I spin the plug and get static.

Settings --> Smart Settings --> Accessory --> "When earphones plugged in".....
I hope this helps.

I have that setting turned off and I still see where google now pops up when I plug/static with my headphones.

Hello, I have the same problem with Google Now opening everytime I plug in my earphones. Is there anyway to stop this happening? I have Smart Settings turned off. Thanks.

Try touching the end to something metal to ground it. Worked for me.

It seems it has something to do with cheap aux cable? My aux cable in my car is pretty cheap one, the other one that i use with bose soundlink, bought in Japan.

Related

Odd whistling noise when connected to aux input in car

I've got an aux input in my car, and today when I tried plugging in my GSIII, I got met with a faint but annoying whistling sound underneath my music.
It stops if there's no sound being sent over the wire, but the moment a notification (or music) starts playing, it comes up.
Car worked fine with my DX, and still works fine with my friends' iPhones, but I get the stupid sound with my brand new galaxy siii. Oddly enough, it works fine with headphones.
any ideas guys? I'm kinda stumped.
Search ground loop isolation. You are getting dirty power to your phone.
Sent from my SPH-L710 using xda premium
none
Do you have the phone charging through the cigarette lighter? You can get ground noise from there, and it will be transmitted through the phone to your stereo.
Hm. Let me try again without it charging, but that's strange. Why did my old DX not experience this?
Assuming that's the issue - will a different cable solve the problem?
edit: So I checked the phone without plugging it into the charger. Still get a whistling noise. It's really more like a high pitched hum. I notice that if I don't plug the plug in all the way it doesn't happen (but I think I only get one channel).
I'm getting the same thing, and it's driving me crazy. At first I thought my brakes were going bad in my car!
I've tried different audio players and apps, but it still always get the noise. The phone is not charging, and I did not get this with my old captivate either.
Any ideas?
Doesnt happen in my Porsche. I'm using Bluetooth audio though.
Sent from my SGH-T999 using Tapatalk 2
Thats strange. I will get that when charging, but only while nothing is playing.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
I am having the same issue. First time experiencing it though; never heard it with the iPhone, HOX, or NS
I'm using a line in cable, and when i jiggle it, i can hear the noise change tone at the same time. I have a feeling it might be because it's a regular stereo cable and the microphone combo jack on the phone is not working right with it. But that's just a guess.
It's pretty annoying and its making the phone unusable as a music player.
Happens in my Lamborghini (Dodge Caravan) when using a MP3 player. Usually, if I run my hand down the cable it clears as though it's some kind of static build up in the cable.
Sent from my Transformer TF101 using xda premium
try flipping the cable (putting the aux in side into the phone and the phone side in the aux in) it happens to me sometimes and if I flip the cable it clears it out I couldn't tell you why though. also make sure there isn't any dust in the ports or on the cable ends.
That noise you hear is most likely due to the electrical system in the car. I rent cars all the time for work and never know the shape the electrical sys is in so to resolve the issue I bought a Kensington Cable from amazon and now have CD quality sound from any music app including pandora & spotify.
Hope this helps.:cyclops:
rmelendez3 said:
try flipping the cable (putting the aux in side into the phone and the phone side in the aux in) it happens to me sometimes and if I flip the cable it clears it out I couldn't tell you why though. also make sure there isn't any dust in the ports or on the cable ends.
Click to expand...
Click to collapse
Unfortunately, my cable is RCA on one side (L+R channels split) and regular 3.5mm on other.
nyciz said:
That noise you hear is most likely due to the electrical system in the car. I rent cars all the time for work and never know the shape the electrical sys is in so to resolve the issue I bought a Kensington Cable from amazon and now have CD quality sound from any music app including pandora & spotify.
Hope this helps.:cyclops:
Click to expand...
Click to collapse
Not sure what you mean by "the electrical system" and the "shape" of it. Could you clarify? As I said, I have no problems with other devices in this car.
I would usually suspect something wrong with the car, or maybe a ground loop, but I can plug in my Galaxy S (Captivate) or iPod with the same cable, same everything, just switching out the phone, and the noise goes away.
The way the noise cuts in and out between songs, and when I close the music app, it seems to only happen when the audio chip is getting a signal or is being energized. This is making me think that it may just be a noisy chip :crying:
I was on conf call with SGS3 plugged to AUX, no power charging was going on. And either noise canceling didn't work, or noise was getting in thru AUX line to receiving end. I didn't have problems listening, but ppl on the other end complained, and I had to mute the mic.
:crying:
cashyftw said:
doesnt happen in my porsche. I'm using bluetooth audio though.
Sent from my sgh-t999 using tapatalk 2
Click to expand...
Click to collapse
sorry! Could you speak up please? I couldn"t hear you over the sound of your e-penis
I am having the same problem. My HTC Thunderbolt never had this problem. Same car and cables, I get the hissing and popping until I play something. Then it goes away until I stop the music and then it comes back again. Weird and disappointing.
The problem comes from the 4-pin (TRRS) audio jack in the GSIII combined with presumably bad grounding in my 2007 Honda Accord, or the Aux adapter.
I fixed it with a simple DIY solution. I cannibalized a TRRS headphone jack and bought a TRS (3-pin) port from radioshack. I clipped off the jack with a generous portion of wire, then stripped them and cleaned them from their insulation (they are covered in insulating dye).
I connected 3 of the wires to the TRS connector, and taped the whole thing up. No more hum.
Also known as Road Noise. Where the power cable and audio input are too close to each other. Electrical current emits a small magnetic field which will hinder audio quality and promote road noise from the alternator.
This is a very typical senario in car audio install, when you run the power cable and rca right next to each other.
this buzzing noise happens to me every time i drive my car for the past 3 years:
solution: turn down the car volume. if you keep your car volume half-way, then you wont hear it as much, or you wont hear it at all.... you can make the phone volume as loud as you want though. also, as you accelerate faster, the noise gets louder. watch, try it.

Fix needed for car bluetooth vs headphone jack issue.

This seems to be a known problem, but after a day of research, I still don't see a solution, or really understand if this will eventually be fixed by (1) a developer update by someone here much smarter than me, (2) a Samsung update, or (3) will never be fixed.
Issue is:
When the SGS3 headphone is engaged (ie: a stereo phone cable from my SGS3 to my car AUX input), you cannot hear and calls in or out from the built in auto bluetooth (mine is an Audi A3). I've tested many alternatives seen on these forums including, TTY settings, call settings, grinding down the stub of the cable so it doesn't fully engage the headphone, etc.
All to no avail, as when the headphone is engaged (a notification of this pops up on the screen), the default sounds ALL go to the headphone source. Of course, the car mutes the audio mode when the bluetooth is enabled, so the sound is lost! What needs to happen is that the phone needs to allow the phone sounds to flow through the bluetooth. Why this doesn't happen by default confuses me. Never had a problem with my HTC Inc2.
Can a solution to this be developed by some of you talented guys out there working on fixes and mods?
[email protected] said:
This seems to be a known problem, but after a day of research, I still don't see a solution, or really understand if this will eventually be fixed by (1) a developer update by someone here much smarter than me, (2) a Samsung update, or (3) will never be fixed.
Issue is:
When the SGS3 headphone is engaged (ie: a stereo phone cable from my SGS3 to my car AUX input), you cannot hear and calls in or out from the built in auto bluetooth (mine is an Audi A3). I've tested many alternatives seen on these forums including, TTY settings, call settings, grinding down the stub of the cable so it doesn't fully engage the headphone, etc.
All to no avail, as when the headphone is engaged (a notification of this pops up on the screen), the default sounds ALL go to the headphone source. Of course, the car mutes the audio mode when the bluetooth is enabled, so the sound is lost! What needs to happen is that the phone needs to allow the phone sounds to flow through the bluetooth. Why this doesn't happen by default confuses me. Never had a problem with my HTC Inc2.
Can a solution to this be developed by some of you talented guys out there working on fixes and mods?
Click to expand...
Click to collapse
Maybe if you go into the control panel of your car's built in computer and check the audio and Bluetooth settings it has, that might fix things.
Thread moved
This does not belong in Development.
So you have bluetooth for phone only and younlisten to your music with aux in? I would say if you had an aux in cable with the mic on it like the headphones, then the phone audio would go out over to the radio... But do they make those or how hard would it be to hack your free headphones you got into a double male aux cable
There are no options anywhere in the car settings.
Car mutes phone audio.
Juicy92 said:
So you have bluetooth for phone only and younlisten to your music with aux in? I would say if you had an aux in cable with the mic on it like the headphones, then the phone audio would go out over to the radio... But do they make those or how hard would it be to hack your free headphones you got into a double male aux cable
Click to expand...
Click to collapse
The sound does go through the phone audio already. But like almost all cars, when the car sees a bluetooth call in or out, it MUTES the audio coming in from the radio, the CD, or any AUX input. The phone should send call audio through bluetooth, but it does not.
Is it not possible to either play the music through the bluetooth or to turn off bluetooth all together. The phone mic would pick up wouldn't it
This is only possible if you have a newer car stereo with A2DP.
Sent from my SCH-I535 using xda app-developers app
So is this just a Samsung problem for me, or for all?
So I am correct that nobody with a bluetooth car phone setup (but no bluetooth streaming) is able to plug their headphones into their aux jacks and still make/receive calls?
Or is this related just to the SGS3? Or just to my Audi bluetooth options?
Would an eventual solution come from a xda brainiac update, from Samsung, or somewhere else?
Do some of you have built in car setups (no bluetooth streaming) that DO WORK with the headphones plugged in?
I can attempt to pair to my brothers car today or tomorrow if that will make you feel better. My bluetooth setup is aftermarket and streams both
I am also curious as to what happens if you don't have bluetooth enabled at all
What about car audio only. Wouldn't it automatically mute your music and then throw the call over bt or is the aux out overpowering the bluetooth signal. Let me look for a way to possibly disable the process that starts when you plug in headphones. Don't count on anything though
---------- Post added at 01:11 AM ---------- Previous post was at 12:52 AM ----------
I was doing a little brainstorming here and even though I am quite a novice with tasker, you may be able to make a task that pauses music and transfers call to bluetooth when both bluetooth and headphones are connected. I am not sure if it is an input device problem or if the phone is just dumb or what, but it may be worth a shot
Juicy92 said:
I can attempt to pair to my brothers car today or tomorrow if that will make you feel better. My bluetooth setup is aftermarket and streams both
I am also curious as to what happens if you don't have bluetooth enabled at all
What about car audio only. Wouldn't it automatically mute your music and then throw the call over bt or is the aux out overpowering the bluetooth signal. Let me look for a way to possibly disable the process that starts when you plug in headphones. Don't count on anything though
---------- Post added at 01:11 AM ---------- Previous post was at 12:52 AM ----------
I was doing a little brainstorming here and even though I am quite a novice with tasker, you may be able to make a task that pauses music and transfers call to bluetooth when both bluetooth and headphones are connected. I am not sure if it is an input device problem or if the phone is just dumb or what, but it may be worth a shot
Click to expand...
Click to collapse
Your setup is not like mine, and should probably work, as you don't have to plug in the headphone jack. Yes, the problem is that IF the headphone jack is plugged in, ALL sound output goes through that and the bluetooth is disabled (even the symbol on the phone screen is grayed out.
With your bluetooth plugged in, just try putting the earbuds in the phone, then make a call to anyone, then see if your bluetooth icon on the phone call is not grayed out. Now unplug the ear buds and see if the icon doesn't come back on. This is the problem I have.
Never had any problems with either stereo worked fine in my altima and benz. I used aux + bluetooth no problem on my epic4g for the past 2 years and when I first got my s3 it was working until I did an update. Then it broke it.
Sick of having to unplug the aux cable everytime I get a call to allow it to switch to bluetooth
Need some people to test this, please...
I'd like to see if the problem is with the rooted phone image or if this problem also exists on stock, unrooted phones.
If you can:
1) pair your phone to your factory car bluetooth, or even a bluetooth headset that does not stream audio.
2) have any pair of headsets or an aux cable ready to plug in.
3) make a call using the bluetooth to anyone (ideally something that has an automatic answer phone cue like this 919-238-2000)
4) while the call is proceeding with the car bluetooth or bluetooth headset, plug in the headphones, or any cable into the headphone jack.
5) WHAT HAPPENS???
Is it (a) you still hear the phone call through the bluetooth, or
(b) you don't hear the call any more and the bluetooth headset icon on the phone pad goes out?
6) Please state what phone you have, what provider you have, and whether the phone is stock or rooted.
THANKS.
[email protected] said:
I'd like to see if the problem is with the rooted phone image or if this problem also exists on stock, unrooted phones.
If you can:
1) pair your phone to your factory car bluetooth, or even a bluetooth headset that does not stream audio.
2) have any pair of headsets or an aux cable ready to plug in.
3) make a call using the bluetooth to anyone (ideally something that has an automatic answer phone cue like this 919-238-2000)
4) while the call is proceeding with the car bluetooth or bluetooth headset, plug in the headphones, or any cable into the headphone jack.
5) WHAT HAPPENS???
Is it (a) you still hear the phone call through the bluetooth, or
(b) you don't hear the call any more and the bluetooth headset icon on the phone pad goes out?
6) Please state what phone you have, what provider you have, and whether the phone is stock or rooted.
THANKS.
Click to expand...
Click to collapse
I'm pretty sure I wasn't rooted the first time I tried it. In any case, I wrote to Samsung support on Facebook, and got this reply:
"Hi Chris, thanks for reaching out! You are correct, you cannot use both Bluetooth and Aux at the same time. A few of our customers found a work around by using an A2DP profile with hands free in the car. I apologize for the inconvenience."
So we know they are getting reports or they wouldn't push AD2P as a solution. I think if enough people write in, they will fix this in an update. We really need a critical mass of people to complain to Verizon and Samsung for this to happen. He did say when I replied asking about a fix, that he had passed my concerns on, etc., etc.
Mention "lawsuits from car accidents" when you write in...
sluzbenik said:
I'm pretty sure I wasn't rooted the first time I tried it. In any case, I wrote to Samsung support on Facebook, and got this reply:
"Hi Chris, thanks for reaching out! You are correct, you cannot use both Bluetooth and Aux at the same time. A few of our customers found a work around by using an A2DP profile with hands free in the car. I apologize for the inconvenience."
So we know they are getting reports or they wouldn't push AD2P as a solution. I think if enough people write in, they will fix this in an update. We really need a critical mass of people to complain to Verizon and Samsung for this to happen. He did say when I replied asking about a fix, that he had passed my concerns on, etc., etc.
Mention "lawsuits from car accidents" when you write in...
Click to expand...
Click to collapse
I have an issue when it's plugged in via Auxiliary there's a nasty echo the caller hears on the other end because of this headphone mode. Anyway to turn it off?
I will probably return it for this reason amongst others.
Belkin Y37 from Amazon will solve this issue, or provide an alternative.
I can fully confirm the functionality of the Belkin F8Z492TTP. It is now custom installed in my A3 with a direct power hookup and direct connection to the aux input. For power, I had to hook up a 12 volt car outlet behind the dash, insert a 12v to usb adapter, and splice the power cord from the factory transformer to a USB cable. Power is with a micro type H plug that Radio Shack does not have. They should give you a usb to type H cable with it.
Anyway, the Galaxy S3 will connect to two bluetooth devices at the same time...the Audi bluetooth and the Belkin Y37 Bluetooth. I put a shortcut button for bluetooth on my home screen which pulls up the options. You DO HAVE TO RECONNECT BLUETOOTH each time you get in the car, but you had to manually plug in the cable the other way.
When a call is made, the car bluetooth takes over with full steering wheel controls, and when it ends, the audio goes back on (I think automatically). Since I have constant power to the Belkin through the 12v, if you step away and then come back, you can automatically regain your connection, which is nice.
I did the modification to the Belkin where I broke it carefully open and pulled the metal innards that are purely designed to give it a feeling of mass. All that is inside is a teeny circuit board that must have cost $1 tops! Belkin lists this at $50, although it is half that on Amazon.
All in all, a decent solution to a frustrating problem. Sound is pretty decent.

Headphone Sound 1-sided

To who ever can help...I'm experiencing an ongoing problem with headphones on my m8. Trying to listen to music is either one sided (left bud) or none at all. If I plug into my stereo, the Jack works and music is played normal. Coming from headphones to stereo, it goes one sided (even playing through the stereo).
I've changed ROMs with full wipe & clean install, the problem still occurs. Various headphones all do the same. I'm almost positive it's a software glitch somewhere but can't find a setting for it. I've tried freezing music apps with TB, I've also installed HK to see if that would tweak something. No clue what else to do.
To clarify, are you saying that using a line cable to connect the phone to your stereo receiver/amp plays both sides. But all headphones, it only plays on one side?
Correct...I CAN play music via aux cord but CAN"T play through headphones of any kind (I've tried three different ones).
Bump
Different headphones use different rubber moldings around the wires, especially near the plug. Some can be thicker and some have little plastic protrusions which prevent the cable from being fully plugged in. If the cable isn't fully inserted, you will sometimes receive no audio in the right ear or no audio at all. I have this problem with a pair of Sony earbuds on my S4 and my M8, and as a result, they're dedicated strictly to my laptop.
Try this...get a male to female aux cord and plug one end to the phone, then plug your headphones into that.
Also, you can try pulling back the plastic sheath around the plug and see if that helps.
slapdaddy said:
Try this...get a male to female aux cord and plug one end to the phone, then plug your headphones into that.
Also, you can try pulling back the plastic sheath around the plug and see if that helps.
Click to expand...
Click to collapse
I'll definitely try this out and see what happens. Its just weird because when I first got the phone the headphones worked (any and all). It wasn't untill I rooted that I started noticing an issue.
Or just cut a bit of the rubber off the edge of the headphones. With the case on my phone I had to do that for the aux jack in my car so that it would go all the way in. Of course only if they are your headphones and don't mind to do that.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
How about the headset that came with the phone? This shouldn't need any jiggering to make it plug in properly.
I would also agree with the notion that if you have a case on the phone, it may interfere with the headphone plugging in. Definitely try taking the case off (if you have one on) to see if it makes any difference.
Have you tried any headphones that don't have the microphone ("normal" headsets that aren't specially intended to use with smartphones)? Its just odd that a AUX cable works, and headphones don't. The only thing I can think that can be different is the hardware and software differences that are associated with the microphone (buttons, etc.).
Are there specific lines of code I can look at in the build .prop? I've gotten half the battle covered by Uninstalling HK and fixing permissions /wiping dalvik. Again music plays perfectly through stereo, whether aux, wifi or bt. One sided when headphones are used. There has to be some funky code going on.
I know this is old but did you ever find out?

Aux Cable / Headphone Bug

So figured I'd go ahead and add a thread about this here for us Sprint users that are experiencing the problem with the Aux cable. Its a known issue and I'd link to a couple other posts, but I'm still a "noob"
I was a little upset to find that I wasn't able to use my phone to Pandora in the car.
However....
Today I got it to work, and here is how: I had the stereo set to the CD player when i plugged the AUX cable in and the icon stayed in the notification bar. Then I launched Pandora and let it start playing. THEN I switched the stereo to AUX mode, and it played fine my entire trip to work. Still experienced the "hot plug" sound between tracks, but I think I can deal with it.
geetee360 said:
So figured I'd go ahead and add a thread about this here for us Sprint users that are experiencing the problem with the Aux cable. Its a known issue and I'd link to a couple other posts, but I'm still a "noob"
I was a little upset to find that I wasn't able to use my phone to Pandora in the car.
However....
Today I got it to work, and here is how: I had the stereo set to the CD player when i plugged the AUX cable in and the icon stayed in the notification bar. Then I launched Pandora and let it start playing. THEN I switched the stereo to AUX mode, and it played fine my entire trip to work. Still experienced the "hot plug" sound between tracks, but I think I can deal with it.
Click to expand...
Click to collapse
I recall having an issue with my samsung headphones. They didn't work at one point, I rebooted and they were fine. The phone didn't even detect them for some reason. I've had no issues with aux in my car (aside from needing a new cable), however I thought it would be worth mentioning that my Note 2 had an issue with aux when it is on any AOSP ROMs. Selecting any app, even swiping the notification window down, sometimes even just leaving the music app and going back will stop the music from playing. The only solution for this was to go to the home screen unplug the aux start music playing and plug the cable back in and touch no other app. Again, it never did this with stock. I even went back to stock briefly because of this. AOSP seems to throw a fit with the aux cables.
I had issues with AUX today as well. Thought it was my specific phone but I'm relieved to know it's common....and perhaps a software issue.
infernosoft said:
I had issues with AUX today as well. Thought it was my specific phone but I'm relieved to know it's common....and perhaps a software issue.
Click to expand...
Click to collapse
Yeah I have it as well...I've found if I start Spotify, then plug in the AUX cord from my car, it works fine.
So I think I know the answer to this one.
It seems to have to do with how cars and some other devices treat aux inputs. For the most part it appears (at least in the case of my Prius) that with the input switched to aux the phone would not consistantly stay aux mode. What it seems like was happening is that the car doesnt actually 'activate' the aux port unless it senses a completed circuit (ie: audio playing). I have to believe this has to do with preventing feedback.
Unfortunately it seems the phone does the exact same thing. The headphone or aux symbol appears on insert of the cable because the phone senses the initial connection but then finds no load on the circuit thus assuming it is not connected and disables the port. You end up with basically an electronic stalemate. Neither one engaging cause they sense nothing from the other side. No load on the circuit.
Bear in mind this is completely dependent on the device you are connecting to your phone, as to whether it does what I'm talking about. Likewise, those experiencing popping or similar during song or track changes would basically be experiencing the same issue as during the song change the phone stops playing audio and your car kills the port. When the car kills the port, the phone kills the port, or is in the process of it when the next song starts.
To counteract this I bought an audio cable with a ground loop circuit built in. It is designed to remove the buzz from car aux audio due to the phone or other device being charged through the car's power system. But the added benefit is that it creates an artificial load on the line that the phone senses. Same idea as plugging in headphones as the earphone on the headphones creates a load on the line in the same way.
This is the audio cable I bought. Works like a charm every time, although one warning. I did experience one case of very loud static when unplugging it through the speakers in my car because of the fact that the car and the phone believe the circuit constantly is active and thus do not kill the connection to save your hearing. So be careful to only plug or unplug it when the input is not active or the car is off.
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ/
It does appear that Amazon has put the item under review for now, though I'm not sure why as mine works flawlessly, but any similar car aux noise reducing cable would work, assuming its decent quality.
An aux cable with an in-line volume control should peform similarly due to the load created by the potentiometer, although it wouldnt remove the charger buzz.
Something like this:
http://www.amazon.com/Apollo23-3-3-Volume-Control-Samsung-Smartphones/dp/B00COXA8Y4
wolfhelm said:
So I think I know the answer to this one.
It seems to have to do with how cars and some other devices treat aux inputs. For the most part it appears (at least in the case of my Prius) that with the input switched to aux the phone would not consistantly stay aux mode. What it seems like was happening is that the car doesnt actually 'activate' the aux port unless it senses a completed circuit (ie: audio playing). I have to believe this has to do with preventing feedback.
Unfortunately it seems the phone does the exact same thing. The headphone or aux symbol appears on insert of the cable because the phone senses the initial connection but then finds no load on the circuit thus assuming it is not connected and disables the port. You end up with basically an electronic stalemate. Neither one engaging cause they sense nothing from the other side. No load on the circuit.
Bear in mind this is completely dependent on the device you are connecting to your phone, as to whether it does what I'm talking about. Likewise, those experiencing popping or similar during song or track changes would basically be experiencing the same issue as during the song change the phone stops playing audio and your car kills the port. When the car kills the port, the phone kills the port, or is in the process of it when the next song starts.
To counteract this I bought an audio cable with a ground loop circuit built in. It is designed to remove the buzz from car aux audio due to the phone or other device being charged through the car's power system. But the added benefit is that it creates an artificial load on the line that the phone senses. Same idea as plugging in headphones as the earphone on the headphones creates a load on the line in the same way.
This is the audio cable I bought. Works like a charm every time, although one warning. I did experience one case of very loud static when unplugging it through the speakers in my car because of the fact that the car and the phone believe the circuit constantly is active and thus do not kill the connection to save your hearing. So be careful to only plug or unplug it when the input is not active or the car is off.
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ/
It does appear that Amazon has put the item under review for now, though I'm not sure why as mine works flawlessly, but any similar car aux noise reducing cable would work, assuming its decent quality.
An aux cable with an in-line volume control should peform similarly due to the load created by the potentiometer, although it wouldnt remove the charger buzz.
Click to expand...
Click to collapse
I just want my G3 to work as it should for such a simple function as the headphone jack/aux port.
I want to listen to music in my car without fannying around with different cables etc etc.
I had a Galaxy Note and S4, both played fine in the same car with the same cabling.
Shame on LG for releasing us a substandard product that cannot perform the most basic of tasks correctly.
I will say, i was extremely dissapointed when i plugged my shinny new phone into my stereo and the audio continued to come through the phone speakers. All other phones/devices work just fine in my car and there is no reason why my G3 shouldn't either.
R2DeeTard said:
I will say, i was extremely dissapointed when i plugged my shinny new phone into my stereo and the audio continued to come through the phone speakers. All other phones/devices work just fine in my car and there is no reason why my G3 shouldn't either.
Click to expand...
Click to collapse
My first feeling was confusion. I was also worried my headphones wouldn't work. But I was able to watch a beautiful high def video on my phone last night with my headphones on
Sent from my LGLS990
I just got this phone too, and although I love it, I was very sad to have this issue! I haven't had it on any other phone I have owned, so I certainly hope it is fixed in a future update. That and the video force close bug, but that is for another thread!
Guys, there is nothing wrong with the AUX port on your cars -- and they don't trigger via sound. They trigger via either conductive circuitry or via ohm load. Can you test if you are still seeing these problems when *not* charging? This issue is typically related to bad grounds. This happens to me at work when my phone is charging and I plug my headphones directly into my G3. If I pass the audio to my PC first (to the line-in,) and THEN to my headphones, the static is mostly gone.
So try unplugging the power source, and using different aux cables. Another factor is try plugging the power source into the same feed as the stereo. Sometimes this isn't that easy though.
What's happening on the back end with the sound changing between songs, etc, is that the audio codec, (the chipset,) is turning off to conserve battery. For me, when the chip turns on, it grounds the 3.5mm port just fine, and when it's off, AND I have power connected with headphones, I can get that whine -- depending on the scenario. So basically, this is by design -- an energy conservation tactic. I would be okay with them leaving the audio chip on the entire time headphones are connected.
Had this problem too and found that as long as I was charging the phone it would play like it should.
Yep, grounding issue. At work, routing the aux signal through my PC works just fine WHILE charging -- if I unplug, then I get all the machine noise.
In general, though, the headphone output is pretty crappy on this device. Even when it's "working great," there is still a faint amount of white noise that can be heard. Much higher than my HTC M7. The S5 had similar performance as the G3 though.
I just bought:
http://www.amazon.com/gp/product/B00ANDHBNS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
And plugged it into:
http://www.amazon.com/gp/product/B00F474DVG/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
So when I get in my car, it connects to the dongle for music and the car's blue tooth for phone.
It's not perfect, but gets the job done.
wolfhelm said:
So I think I know the answer to this one.
It seems to have to do with how cars and some other devices treat aux inputs. For the most part it appears (at least in the case of my Prius) that with the input switched to aux the phone would not consistantly stay aux mode. What it seems like was happening is that the car doesnt actually 'activate' the aux port unless it senses a completed circuit (ie: audio playing). I have to believe this has to do with preventing feedback.
Unfortunately it seems the phone does the exact same thing. The headphone or aux symbol appears on insert of the cable because the phone senses the initial connection but then finds no load on the circuit thus assuming it is not connected and disables the port. You end up with basically an electronic stalemate. Neither one engaging cause they sense nothing from the other side. No load on the circuit.
Bear in mind this is completely dependent on the device you are connecting to your phone, as to whether it does what I'm talking about. Likewise, those experiencing popping or similar during song or track changes would basically be experiencing the same issue as during the song change the phone stops playing audio and your car kills the port. When the car kills the port, the phone kills the port, or is in the process of it when the next song starts.
To counteract this I bought an audio cable with a ground loop circuit built in. It is designed to remove the buzz from car aux audio due to the phone or other device being charged through the car's power system. But the added benefit is that it creates an artificial load on the line that the phone senses. Same idea as plugging in headphones as the earphone on the headphones creates a load on the line in the same way.
This is the audio cable I bought. Works like a charm every time, although one warning. I did experience one case of very loud static when unplugging it through the speakers in my car because of the fact that the car and the phone believe the circuit constantly is active and thus do not kill the connection to save your hearing. So be careful to only plug or unplug it when the input is not active or the car is off.
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ/
It does appear that Amazon has put the item under review for now, though I'm not sure why as mine works flawlessly, but any similar car aux noise reducing cable would work, assuming its decent quality.
An aux cable with an in-line volume control should peform similarly due to the load created by the potentiometer, although it wouldnt remove the charger buzz.
Something like this:
http://www.amazon.com/Apollo23-3-3-Volume-Control-Samsung-Smartphones/dp/B00COXA8Y4
Click to expand...
Click to collapse
I just purchased this:
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ/ref=sr_1_1?ie=UTF8&qid=1406313911&sr=8-1&keywords=kensington+noise+reducing+car+audio+aux+cable
Working pretty well. Mainly solves the connectivity issues.
Still have the pop between tracks but it's much better.
Still have the "computer talk" garbage noise related to the display coming through the left channel.
I can live with this until LG or Android comes up with a fix.
aux problem
I guess I lucked out with my phone but then again maybe not. First off I will describe my setup, I have a 05 Subaru WRX with stock 6cd changer head unit ( no aux port ) I installed a Harmon Kardon Drive + Play iPod dock. This allows me to remote control my iPod and comes with a display that shows tracks and such. It works by FM transmitter but has an optional wire which I have that connects directly between the antenna and the stereo so you get little to no loss of signal. Between the AUX and my phone I connected a PAC SNI-1/3.5 3.5-mm Ground Loop Noise device. My previous phone was an LG Optimus G which I loved, when I hooked this phone up I could listen to Pandora/TuneinRadio through my car speakers and upon making/receiving a call I would hear the call through the car speakers and when I talked the phone mic. would pick up my voice. When I attempt this with the G3 I get no popping between tracks but the phone mutes the mic and when I say mute I don't mean the mute button comes on I mean the other person can't hear me. I found if I unplug and plug the phone in during the call eventually the mic works again, but to do this while driving defeats the purpose of hands free calling. Does anyone else have this problem? (or a solution).
Click to open expanded view
gorillaz1 said:
Yeah I have it as well...I've found if I start Spotify, then plug in the AUX cord from my car, it works fine.
Click to expand...
Click to collapse
Works for me, thank you.
Mines does not work at all, with headphones or aux Jack, now I have to get Bluetooth headphones and bluetooth radio for car
Sent from my LGLS990 using XDA Free mobile app
Do we know if LG is working on this issue? Or if it is something that can even be fixed with an update? I'm getting tired of messing with the cable just to play music in my car, and I don't want to have to buy extra accessories to get the job done.
Sent from my LGLS990 using XDA Free mobile app
Bumping this thread because I just started having issues. Last night I was listen to music with headphones and my device kept turning itself down. I thought it was Tasker at first but it kept happening. Today at work I wanted to listen to music on headphones again and the sound would only come through my device. I'm going to try an aux and other headphones when I get off work, but does anyone know if a system restore will fix this? I'm rooted with TWRP, I just don't want to wipe it for nothing.
Srambo217 said:
Bumping this thread because I just started having issues. Last night I was listen to music with headphones and my device kept turning itself down. I thought it was Tasker at first but it kept happening. Today at work I wanted to listen to music on headphones again and the sound would only come through my device. I'm going to try an aux and other headphones when I get off work, but does anyone know if a system restore will fix this? I'm rooted with TWRP, I just don't want to wipe it for nothing.
Click to expand...
Click to collapse
They fixed it with ZV6. If you're already on ZV6 then I have no idea.
Sent from my LGLS990 using XDA Free mobile app

Charging causes interference to audio

Sometimes when I am using the headphone jack in the car or with headphones AND I connect a charger, I get a lot of noise on the audio. I've used different charging sources (car, computer, etc), cables (LG, other), headphones, but it persists. Anyone else experience this?
yes, is normal, because car chargers have different frequency range of work that make some kind of interference with the processor and some other components of the phone, not only the audio jack, you only notice it with headphones connected but anyway the phone make some interference sounds you cant hear normally, try put your ear close to the call speaker or to the back of the phone when connected to the car charger and you see what i am talking about.
dont worry about that...
sun_is_shinning said:
yes, is normal, because car chargers have different frequency range of work that make some kind of interference with the processor and some other components of the phone, not only the audio jack, you only notice it with headphones connected but anyway the phone make some interference sounds you cant hear normally, try put your ear close to the call speaker or to the back of the phone when connected to the car charger and you see what i am talking about.
dont worry about that...
Click to expand...
Click to collapse
If it was just in the car then I understand, but I wouldn't expect this kind of noise coming from the USB connection on my laptop docking station.
universal_cynic said:
If it was just in the car then I understand, but I wouldn't expect this kind of noise coming from the USB connection on my laptop docking station.
Click to expand...
Click to collapse
I get it too. Whenever I'm at work listening to music and I charge my phone at the same time. (Regular elec outlet.)
I'm not sure if it's common or not as I've never seen any other threads about it. I have noticed that sometimes if I unplug/plug back in, I can sometimes get it to go away.
does this happen on all headphones?
it'll happen on cheaper pairs where the cable isn't shield.
On a pair of panasonic in-ear noise cancelling earphones i'll get noise whilst charging off AC.
However when i try a pair of Sony headphones with are using a Monster cable, there's no noise.
One thing i did notice is that when there's noise, if you touch the metal frame of the phone to ground it, the noise disappears.

Categories

Resources