I will flash ARHD 6.0.0 tomorrow, when it finishes download lol. I just want to know, can I use TA on lastest firmware? Currently I am on stock firmware (XX region)
Problems see the thread but works for me on all JB roms .
jje
as long as your phone model support then can already
no matter you use what rom
Okay, I will wait for new CFRoot and TA before flashing ARHD 6
GR0S said:
Okay, I will wait for new CFRoot and TA before flashing ARHD 6
Click to expand...
Click to collapse
CF-Root 6.4 should also work on JB Did it myself with stock JB.
gee2012 said:
CF-Root 6.4 should also work on JB Did it myself with stock JB.
Click to expand...
Click to collapse
So I can flash CFRoot on mine stock phone, and flash new ARHD 6.0.0 after that,then flash CFRoot again ?
Flash CFRoot
Flash ARHD
Flash CFRoot
ARHD is already rooted so no need to flash CF-root on top of it
So:
-flash CF-root on your stock rom
-flash ARHD 6.0
-You are good!
if your are rooted
u can do it on your SGS3:good:
GR0S said:
So I can flash CFRoot on mine stock phone, and flash new ARHD 6.0.0 after that,then flash CFRoot again ?
Flash CFRoot
Flash ARHD
Flash CFRoot
Click to expand...
Click to collapse
You don't have to flash CF-Root after flash ARHD, as ARHD rom is already rooted.
Related
Recently , i have been watching some Cyanogenmod 9 ICS 4.0.3 ROM video and it seems to be cool. Well my question is if i flash the Cyanogenmod ROM , can i re-flash the stock ROM that i had?
And is it safe to flash a custom rom?
Gab! said:
Recently , i have been watching some Cyanogenmod 9 ICS 4.0.3 ROM video and it seems to be cool. Well my question is if i flash the Cyanogenmod ROM , can i re-flash the stock ROM that i had?
And is it safe to flash a custom rom?
Click to expand...
Click to collapse
Cool as in not overheating ???
a wipe and flash of stock rom will remove custom rom .
Root and custom roms void warranty and have a slight risk of bricking the phone .
But are usually recoverable .
You need to read the faqs and guides and understand the CM9 instuctions first .
jje
Gab! said:
Recently , i have been watching some Cyanogenmod 9 ICS 4.0.3 ROM video and it seems to be cool. Well my question is if i flash the Cyanogenmod ROM , can i re-flash the stock ROM that i had?
And is it safe to flash a custom rom?
Click to expand...
Click to collapse
to flash cynogen rom first u have 2 root ur phone please find the thread in original devlopment section regarding the same
u can reflash ur stock rom by dwnld the releavant .tar file adn flash the same thru odin
You can re-flash the stock rom, but just be sure to know which one is your stock rom. Go to settings, about phone and record the info there to be safe. Also back up your current rom using CWM.
There are always some risk in flashing a rom. Some people dont read instructions and cause problems on their phone, some people flash a rom not built for their phone (i9100 VS i9100G), etc.
Yeah i have rooted my device with cf-root. Thanks guys , i'll read some guides about cyanogenmod and flash it.
If your are currently on GB stock rom, Cyanogenmod developer recommends to install ICS bootloaded first,
You should be able to reflash your Stock ROM veriosn from ODIN, as well as custom roms from CWM...
What is bootload? o.o
My current firmware is ICS LP7
ZACQ8 said:
If your are currently on GB stock rom, Cyanogenmod developer recommends to install ICS bootloaded first,
You should be able to reflash your Stock ROM veriosn from ODIN, as well as custom roms from CWM...
Click to expand...
Click to collapse
No they say to have below some specific ics boot loader, no mention of upgrading your gb boot loader, unless they changed it.
Plus I yet to had any issues with the latest ics or gb bootloaders..
Sent from my GT-I9100 using Tapatalk 2
I think he meant boot loader.
But since you already have ICS, you won't need it. Just take the latest CM9 nightly (or ROM based off it), and flash (you'll have to wipe cache data and dalvik too eventually). Make sure you make a full backup of your current stock ROM through CWM as well.
Sent from my GT-I9100
Gab! said:
What is bootload? o.o
My current firmware is ICS LP7
Click to expand...
Click to collapse
I refer this guide actually : http://forum.xda-developers.com/showpost.php?p=20841817&postcount=1
I dont know its outdated,
as others are sharing their experiance that you could flash CM9 straight away from your CWM since you are already on LP7 with ICS Bootloader.....
I don't get it... What is a bootloader?. I mean when i flashed with ICS LP7 i didn't put a file on bootloader. I just loaded the PDA .tar file and flashed it..
Soo that means that i have to reflash the stock rom with bootloader?
Gab! said:
I don't get it... What is a bootloader?. I mean when i flashed with ICS LP7 i didn't put a file on bootloader. I just loaded the PDA .tar file and flashed it..
Soo that means that i have to reflash the stock rom with bootloader?
Click to expand...
Click to collapse
I dont know the ICS package you flashed had an ICS Bootloader already...
I just gave you the link for Original CM9 developers guide...
Just wait for others recommendation who have already flsahed CM9 from CWM....
Hmm thanks . But i have read in the guide that i can flash it with odin , do i still need the bootloader?
So real quick....
I rooted my phone with ODIN last night, so I'm still running AT&T Rom and Stock 3e. I am trying to get JB installed but don't know where to go from here. I need to get Clockwork Recovery right? If so, how can I get that on my phone? I did read I should not used ROM MANAGER!
Sorry for the stupidity! I got JB on my last Galaxy before it broke I'm just confused because I did it a different was last time. Thanks for the help!
just flash a custom kernel with ODIN. That'll give you CWM recovery. then you can flash whatever you want.
MotoMudder77 said:
just flash a custom kernel with ODIN. That'll give you CWM recovery. then you can flash whatever you want.
Click to expand...
Click to collapse
Ok, is Odin 1.85 sufficient (or is there a newer one) and then can I just flash it with Siyah 4.1.4?
IDK much about Odin. But if it worked for ya the first time it should be good.
for the kernel, you must find one in a format Odin uses and not in the normal .zip which requires CWM recovery to flash.
Right now .tar is the only one that comes to mind for Odin.
dsebbs said:
Ok, is Odin 1.85 sufficient (or is there a newer one) and then can I just flash it with Siyah 4.1.4?
Click to expand...
Click to collapse
I would flash a kernel that is compatible with whatever ROM you have currently. Then flash a JB ROM from CWM . Flash Siyah after you have JB if that is the kernel you want. I think you would get boot looped if kernel and ROM are mismatched.
adfurgerson said:
I would flash a kernel that is compatible with whatever ROM you have currently. Then flash a JB ROM from CWM . Flash Siyah after you have JB if that is the kernel you want. I think you would get boot looped if kernel and ROM are mismatched.
Click to expand...
Click to collapse
Okay cool. I know this might be asking a lot but can you just link to me a Kernel that will work with the ROM I have? It's still the AT&T Stock Rom 2.3.4 with Baseband I777UCKH7 and Kernel 2.6.35.7.
dsebbs said:
Okay cool. I know this might be asking a lot but can you just link to me a Kernel that will work with the ROM I have? It's still the AT&T Stock Rom 2.3.4 with Baseband I777UCKH7 and Kernel 2.6.35.7.
Click to expand...
Click to collapse
Take a look at the guide which is the top link in my signature. It will give you a little more detail on what you want to do, and has links to the available Gingerbread kernels.
adfurgerson said:
I would flash a kernel that is compatible with whatever ROM you have currently. Then flash a JB ROM from CWM . Flash Siyah after you have JB if that is the kernel you want. I think you would get boot looped if kernel and ROM are mismatched.
Click to expand...
Click to collapse
the only point in flashing a kernel compatible with a ROM, would be if you wanted to boot into the ROM.
Yes, flashing a kernel meant for a different version will most likely bootloop.
You can flash any kernel you want if you have no intentions on booting the system.
Recovery inside the kernel has nothing to do with what ROM your running. Will always be able to boot into recovery. Or **** broke
I give you lots of credit for reading not to use rom manager!
Sent from my SGH-I777 using xda premium
If you use Mobile Odin you can flash a custom kernel that will install CWM and then flash a custom ROM with CWM. I do this so I do not mess with the flash counter.
dsebbs said:
So real quick....
I rooted my phone with ODIN last night, so I'm still running AT&T Rom and Stock 3e. I am trying to get JB installed but don't know where to go from here. I need to get Clockwork Recovery right? If so, how can I get that on my phone? I did read I should not used ROM MANAGER!
Sorry for the stupidity! I got JB on my last Galaxy before it broke I'm just confused because I did it a different was last time. Thanks for the help!
Click to expand...
Click to collapse
It sounds like you're taking the same route I did to root my phone. I first flashed a rooted, stock ICS ROM, then I flashed the Siyah kernel using Mobile Odin, then I eventually went on to flash a JB ROM (SuperNexus) using Mobile Odin. I'm sure I could have skipped that step of flashing Siyah because SuperNexus flashes a CM kernel anyway, but I kinda didn't know what I was doing.
hi. title says everything. do i have to run autoroot or can i just flash the latest siyah kernel to have root/su ob JB 4.11 XXDLID? does this kernel work with this stock jb? if not, after that i can flash any custom rom via cwm, right?
thanks 4 help
bruzzler2809 said:
hi. title says everything. do i have to run autoroot or can i just flash the latest siyah kernel to have root/su ob JB 4.11 XXDLID? does this kernel work with this stock jb? if not, after that i can flash any custom rom via cwm, right?
thanks 4 help
Click to expand...
Click to collapse
It is said in kernel op that it works with every jb room...
I've never tried, but this kernel is set to auto root so just try.
Hey all.
After reading about the brickbug and failing the eMMC test, im a little confused as to the safest way to root and install a custom rom.
I am currently runnning ICS 4.0.3 with I9100TDULPB kernel on an aussie vodafone branded device.
Do i simply use odin to flash a stock samsung JB ROM, then flash Philz or Siyah JB kernel for root+cwm, then custom rom install via cwm?
I would also like to retain the option of flashing my carrier stock image incase of warranty purposes.
Cheers
Do i simply use odin to flash a stock samsung JB ROM, then flash Philz or Siyah JB kernel for root+cwm, then custom rom install via cwm?
Click to expand...
Click to collapse
Exactly !
PD: Remember to follow the installation instructions on the rom thread, otherwise u'll end in nasty bootloops
Thanks for the quick reply
So this will ultimately allow me to odin flash back to the stock ICS Vodafone Branded ROM later down the track?
Cheers.
strokemesilly said:
Thanks for the quick reply
So this will ultimately allow me to odin flash back to the stock ICS Vodafone Branded ROM later down the track?
Cheers.
Click to expand...
Click to collapse
yes, whenever u want to go back to complete stock, u just download ur stock firmware and flash it through odin
Awseome!
Thanks Poroto
HI
I have Galaxy s2 with android 2.3.5. I want flash OMNI 4.4 rom on it..but before that I want to flash latest CWM recovery on my S2. And also my S2 doesn't have root access So the problem is
Can I flash latest CWM recovery when my S2 have android 2.3.5. ? or should I update official ICS from OTA before flash ?
(I'm planning to use ODIN to flash CWM)
thanks
Click to expand...
Click to collapse
Step 1 - flash CF kernel which is appropriate to ur baseband with Odin
Step 2- Flash cutom rom what ever u want
Step 3 - Flash Gapps..
Thats all :good:
You can flash CWM and then the custom ROM now itself, without upgrading to ICS. Just make sure you flash the correct rooted kernel for your baseband version. Don't directly flash any CWM or use ROM manager. Good luck!
immortalneo said:
You can flash CWM and then the custom ROM now itself, without upgraing to ICS. Just make sure you flash the correct rooted kernel for your baseband version. Don't directly flash any CWM or use ROM manager. Good luck!
Click to expand...
Click to collapse
My details
Baseband version - I9100BUKI1
Kernal Version - 2.6.35.7-I9100BUKJ3-CL647431 [email protected]#2
Build number - GINGERBREAD.BUKJ3
So can anyone give me correct CWM recovery to my S2 ? (I just want to flash kitkat rom.. )
And you can't search for this why exactly ? You've been here more than long enough to know how things work.
Flash Gustavo's kernel first and then follow instructions on the omni thread for flashing as a first time user.
Search around and you will find everything here itself.
I'd suggest flashing the latest stock rom via Odin, ms1 I believe. Then flash philz kernel. Then boot into recovery, (while your new rom cwm zips are on your SD card) format system, preload, data and cache. Then flash the omni rom zip, and the correct gapps, and any other mods you would like.
Sent from my GT-I9100 using Tapatalk 4