Related
I will flash ARHD 6.0.0 tomorrow, when it finishes download lol. I just want to know, can I use TA on lastest firmware? Currently I am on stock firmware (XX region)
Problems see the thread but works for me on all JB roms .
jje
as long as your phone model support then can already
no matter you use what rom
Okay, I will wait for new CFRoot and TA before flashing ARHD 6
GR0S said:
Okay, I will wait for new CFRoot and TA before flashing ARHD 6
Click to expand...
Click to collapse
CF-Root 6.4 should also work on JB Did it myself with stock JB.
gee2012 said:
CF-Root 6.4 should also work on JB Did it myself with stock JB.
Click to expand...
Click to collapse
So I can flash CFRoot on mine stock phone, and flash new ARHD 6.0.0 after that,then flash CFRoot again ?
Flash CFRoot
Flash ARHD
Flash CFRoot
ARHD is already rooted so no need to flash CF-root on top of it
So:
-flash CF-root on your stock rom
-flash ARHD 6.0
-You are good!
if your are rooted
u can do it on your SGS3:good:
GR0S said:
So I can flash CFRoot on mine stock phone, and flash new ARHD 6.0.0 after that,then flash CFRoot again ?
Flash CFRoot
Flash ARHD
Flash CFRoot
Click to expand...
Click to collapse
You don't have to flash CF-Root after flash ARHD, as ARHD rom is already rooted.
today i download and install omega v16 jb 4.1.2. its automatically erase my siyah kernel and install philz kernel, now i try to flash my mobile with latest siyah kernel cwm zip by install zip in philz cwm but its not flashing. can some one help me out how to install dual boot using omega v16 jb 4.1.2 rom
appumohanty said:
today i download and install omega v16 jb 4.1.2. its automatically erase my siyah kernel and install philz kernel, now i try to flush my mobile with latest siyah kernel cwm zip by install zip in philz cwm but its not flushing. can some one help me out how to install dual boot using omega v16 jb 4.1.2 rom
Click to expand...
Click to collapse
What do you mean by 'it's not flashing'? You selected Install zip from sd-card and then what happened?
Sent from the Matrix
Donnie Sins said:
What do you mean by 'it's not flashing'? You selected Install zip from sd-card and then what happened?
Sent from the Matrix
Click to expand...
Click to collapse
ya i select install zip , then choose zip from sd card then siyah 5.01 cwm zip, its starting installation but suddenly its exiting flashing,
Flash with Odin in Download mode.
And you can't flush a kernel, but you can flush a toilet.
Sent from my GT-I9100
appumohanty said:
ya i select install zip , then choose zip from sd card then siyah 5.01 cwm zip, its starting installation but suddenly its exiting flashing,
Click to expand...
Click to collapse
Maybe you have a corrupted downloadfile, so you
have to download the kernel again.
boki9999 said:
Flash with Odin in Download mode.
And you can't flush a kernel, but you can flush a toilet.
Sent from my GT-I9100
Click to expand...
Click to collapse
^^
But it should be possible through CWM...
Sent from the Matrix
Donnie Sins said:
Maybe you have a corrupted downloadfile, so you
have to download the kernel again.
i try with this file before, its was working with other kernel after installing philz kernel its not working, omega by default install philz kernel and after installation siyah is not flashing,
^^
But it should be possible through CWM...
Sent from the Matrix
Click to expand...
Click to collapse
i try with this file before, its was working with other kernel after installing philz kernel its not working, omega by default install philz kernel and after installation siyah is not fashing,
appumohanty said:
i try with this file before, its was working with other kernel after installing philz kernel its not working, omega by default install philz kernel and after installation siyah is not fashing,
Click to expand...
Click to collapse
have you tried flashing in download mode with odin?
boki9999 said:
have you tried flashing in download mode with odin?
Click to expand...
Click to collapse
no i will try it now and will let you know
finally able to flash siyah kernel but omega v14 not running, its doesn't support .
appumohanty said:
finally able to flash siyah kernel but omega v14 not running, its doesn't support .
Click to expand...
Click to collapse
Did you flash Siyah 5.0i?
boki9999 said:
Did you flash Siyah 5.0i?
Click to expand...
Click to collapse
i flash with latest 5.0.1, but i am getting black screen after after kernel booting,
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
the omega does not start because the siyah is not compatible with the new leak 4.1.2 LJS .... there aren't still compatible kernel ... You need to reinstall the kernel Philzo to go back
alister91 said:
the omega does not start because the siyah is not compatible with the new leak 4.1.2 LJS .... there aren't still compatible kernel ... You need to reinstall the kernel Philzo to go back
Click to expand...
Click to collapse
same thing i try lot, to go back siyah from philz and when ever i try to flash siyah kernel 5.0i its shows some wrong message so what i did i flash with siyah 4.0.1 link for download it http://downloadandroidrom.com/file/GalaxyS2/kernels/ICS/SiyahJBICS/Siyah-s2-v4.0.1-CWM.zip
download this kernel and i am sure it can be flash by philz kernel. once flash over its restart and your mobile stuck on siyah logo, downt worry remove your batter and boot in to siyah recovery and reload other rom, be sure to save rom to your memory card other wise in siyah recovery you can go for mount usb and copy rom. i think this will help you lot
den_breacker said:
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
Click to expand...
Click to collapse
same thing i try lot, to go back siyah from philz and when ever i try to flash siyah kernel 5.0i its shows some wrong message so what i did i flash with siyah 4.0.1 link for download it http://downloadandroidrom.com/file/GalaxyS2/kernels/ICS/SiyahJBICS/Siyah-s2-v4.0.1-CWM.zip
download this kernel and i am sure it can be flash by philz kernel. once flash over its restart and your mobile stuck on siyah logo, downt worry remove your batter and boot in to siyah recovery and reload other rom, be sure to save rom to your memory card other wise in siyah recovery you can go for mount usb and copy rom. i think this will help you lot
1. Siyah Kernal Odin version : Flash via Odin ( http://d-h.st/Bcf )
2. Enter into Siyah recovery and flash a compatibale ROM.
Done.
If you havent got a rom on your micro SD card
a) In siyah kernal mount USB storage.
b) Use an micro-sd reader to copy flashable zip
den_breacker said:
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
Click to expand...
Click to collapse
Currently siyah doesn't support leaked jb.. So stay with Phil kernal...
You can try latest Dori kernal... Dual boot with omega... Rom my frnd using that...
Sent from my GT-I9100 using xda premium
xDa_nightfury said:
Currently siyah doesn't support leaked jb.. So stay with Phil kernal...
You can try latest Dori kernal... Dual boot with omega... Rom my frnd using that...
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
unfortunately even dorimanx works .... you have to wait
appumohanty said:
today i download and install omega v16 jb 4.1.2. its automatically erase my siyah kernel and install philz kernel, now i try to flash my mobile with latest siyah kernel cwm zip by install zip in philz cwm but its not flashing. can some one help me out how to install dual boot using omega v16 jb 4.1.2 rom
Click to expand...
Click to collapse
http://db.tt/YceTd0pl flash a kernel cleaning script before you flash a new kernel
---------- Post added at 02:29 PM ---------- Previous post was at 02:25 PM ----------
den_breacker said:
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
Click to expand...
Click to collapse
Siyah,Dorimanx kernel does not have a support yet in jb leaked xxlsj, but for sure they are working with it now..
Thanks A Lot
appumohanty said:
same thing i try lot, to go back siyah from philz and when ever i try to flash siyah kernel 5.0i its shows some wrong message so what i did i flash with siyah 4.0.1 link for download it download this kernel and i am sure it can be flash by philz kernel. once flash over its restart and your mobile stuck on siyah logo, downt worry remove your batter and boot in to siyah recovery and reload other rom, be sure to save rom to your memory card other wise in siyah recovery you can go for mount usb and copy rom. i think this will help you lot
Click to expand...
Click to collapse
Thanks a lot man....had been searching around a lot for this...didnt wanna use odin... so was looking for a compatible siyah kernel...your post helped a lot....many thanks...
Hi,
This international S2 came out of the box running a stock ICS 4.0.3 and appears to have root access, also has "SuperSU", however it has the stock recovery mode.
I'm interested in replacing the stock recovery mode with CWM so that I can install custom ROMs but my device is already rooted and I'm quite confused about this, should I just go ahead and flash a CWM kernel?
And also,
Do I have to match the kernel to the ROM that I'm going to flash (AOSP, AOKP, XXLSJ)?
Thanks.
Just flash Siyah, Dorimanx,... with Odin.
And yes some Roms doen't work with some Kernel. For example I had problems with Siyah and CM10.1
Sent from my GT-I9100 using xda app-developers app
David-B-737 said:
Hi,
This international S2 came out of the box running a stock ICS 4.0.3 and appears to have root access, also has "SuperSU", however it has the stock recovery mode.
I'm interested in replacing the stock recovery mode with CWM so that I can install custom ROMs but my device is already rooted and I'm quite confused about this, should I just go ahead and flash a CWM kernel?
And also,
Do I have to match the kernel to the ROM that I'm going to flash (AOSP, AOKP, XXLSJ)?
Thanks.
Click to expand...
Click to collapse
Install Mobile Odin n flash cwm
http://forum.xda-developers.com/showthread.php?t=1347899
David-B-737 said:
Hi,
This international S2 came out of the box running a stock ICS 4.0.3 and appears to have root access, also has "SuperSU", however it has the stock recovery mode.
I'm interested in replacing the stock recovery mode with CWM so that I can install custom ROMs but my device is already rooted and I'm quite confused about this, should I just go ahead and flash a CWM kernel?
And also,
Do I have to match the kernel to the ROM that I'm going to flash (AOSP, AOKP, XXLSJ)?
Thanks.
Click to expand...
Click to collapse
just flash the Siyah kernel v4.1.5 or v5.0.1(tar file for ODIN) using 'ODIN' on ur PC to get proper wrk'ng CWM app installed on ur phone
Then use Siyah's recovery to flash any custom rom of ur choice
Hey guys,
I have just need some help.
I got a s2 4.0.4 (no root) and would like to install the disaster custom rom.
Because i have 4.0.4 and can brick my phone i need some helps/tips..
So as i understand i need cwm to flash the custom rom.
To get cwm i need root. Well, which root methode should i use?
I want one with cwm and supersu in it.
Oh, and after i have root on the 4.0.4 and flash the 4.1.2 custom rom do i keep my root?
HAKANN said:
Hey guys,
I have just need some help.
I got a s2 4.0.4 (no root) and would like to install the disaster custom rom.
Because i have 4.0.4 and can brick my phone i need some helps/tips..
So as i understand i need cwm to flash the custom rom.
To get cwm i need root. Well, which root methode should i use?
I want one with cwm and supersu in it.
Oh, and after i have root on the 4.0.4 and flash the 4.1.2 custom rom do i keep my root?
Click to expand...
Click to collapse
Just dwnld the 'Siyah kernel v4.1.5 or v5.0.1' (tar file for ODIN) and flash the same thro 'Odin' on ur pc.
It will automatically Root ur phone and install 'SuperSu' and latest CWM recovery for u.
then using the cwm recovery of siyah kernel u can flash any custom rom of ur choice.
after flashing the custom rom based on 4.1.2 u wont loose ur root
ps- once u install custom kernel like siyah ur phone will be safe from the 'Brick Bug' issue for sure
Flashed the Siyah Kernel.
About to flash custom rom
but got one finally question.
The custom rom; http://forum.xda-developers.com/showthread.php?t=1498017
Says it has philz kernel or whatever
so can i still flash it? and does it change my kernel?
Does it have a effect on me?
HAKANN said:
Flashed the Siyah Kernel.
About to flash custom rom
but got one finally question.
The custom rom; http://forum.xda-developers.com/showthread.php?t=1498017
Says it has philz kernel or whatever
so can i still flash it? and does it change my kernel?
Does it have a effect on me?
Click to expand...
Click to collapse
Yes, u can flash it and the Kernel (philz) that comes with that rom will replace ur Siyah kernel for sure but u wont loose ur root
it will not have any effect on u though
do follow the install instruction for a successfull flash of the rom.
Cheers!!
Thanks, it works!!
Hi guys !
I'm new in this section, and my Galaxy S 2 is just rooted. Otherwise it's pure Samsung Rom.
I was looking for a way to install Omega Rom, but i'm kinda lost...
I've already read many tutorials, but...
The thing that i can't understand is, should i flash a compatible kernel, and then the rom i want, or is the kernel included in rom installation ?
Thanks in advance.
Cheers !
Hey,
Look at Omega ROM thread to see if it has included Kernel.
If it has a Kernel included, go ahead and flash it directly otherwise flash siyah kernel and then Omega (providing that they're both compatible, which i am sure that they are)
Cheers.
PS. Welcome to Galaxy S2 world!
Thanks for your reply !
In Omega thread, it says :
Inside Omega v20 Jelly Bean 4.1.2:
Based on firmware XWLSD Android 4.1.2 (Date: 31/01/2013)
Kernel: PhilZ cwm6
Modem XXLS8
CSC Multi set to EUR
So, kernel PhilZ is included in the installation, right ?
But, XWLSD mean that i should switch to firmware XWLSD before flash, or it's just in indication ?
repulse said:
Thanks for your reply !
In Omega thread, it says :
Inside Omega v20 Jelly Bean 4.1.2:
Based on firmware XWLSD Android 4.1.2 (Date: 31/01/2013)
Kernel: PhilZ cwm6
Modem XXLS8
CSC Multi set to EUR
So, kernel PhilZ is included in the installation, right ?
But, XWLSD mean that i should switch to firmware XWLSD before flash, or it's just in indication ?
Click to expand...
Click to collapse
No that means omega rom is based on latest stock LSD..And yes philz kernel comes with the rom. All you need is a safe kernel like siyah or dorimanx which has a proper CWM recovery
Thank you guys ! Will try to do it ASAP !
Cheers !
Well actually Philz is also safe kernel.
But if you want to switch to Siyah kernel or whatever do that after flashing the ROM
WardenBerret said:
Well actually Philz is also safe kernel.
But if you want to switch to Siyah kernel or whatever do that after flashing the ROM
Click to expand...
Click to collapse
So, can i flash Omega Rom in stock recovery, to switch directly from Samsung kernel to Philz ?
With Omega rom you will get Omega files app and you can dload there kernels and other stuff. Kernel section there is links to the philz, jeboo and siyah kernels. Just try there and use that what is best for you.
-MVKA
Sent from my GT-I9100 using Tapatalk 2
That can be really helpfull, thanks !
But, can i flash it in stock recovery, or should i first flash CWM (or other) recovery ?
repulse said:
That can be really helpfull, thanks !
But, can i flash it in stock recovery, or should i first flash CWM (or other) recovery ?
Click to expand...
Click to collapse
Do not flash roms in stock recovery. Specially if you are on ICS 4.0.4. You might brick your phone. If you are on ICS flash a safe kernel like siyah v5 or dorimanx kernel via ODIN. Then you can boot into recovery, do a wipe data/cache and install omega or whatever rom you want
repulse said:
That can be really helpfull, thanks !
But, can i flash it in stock recovery, or should i first flash CWM (or other) recovery ?
Click to expand...
Click to collapse
First flash a custom kernel, and from that point you can do a full wipe and flash roms.
Thank you all for your help guys !
Cheers !
Can anyone of you point me to the right kernel here please : http://dorimanx.shine.sk/ or in PhilZ Kernel thread.
Because i'm lost, there is to many choices and i don't want to blow up my phone.. I know that it should match my rom version, but match my actual rom, or the rom that i want to flash ?
Or more simplistic, can i flash it over stock kernel ?
Cheers !
EDIT : Kernel_Siyah-Dorimanx-V8.2-[17-35]-[05-03]-ICS-JB-SGII-PWR-CORE.zip is the right, i think... but need confirmation