[Q] (Q Flyer) UK 3G+WiFi need s-off - HTC Flyer, EVO View 4G

Hello Flyer expert,
I have a HTC flyer UK 3g 32GB
Running on 2.3.3
Kernel version:
2.6.35.10-gb1cf1af
[email protected]#1
Baseband version:
20.35.30.089bu_3809.050401.04_M
software # 1.36.405.5
FLYER PVT SHIP S-ON RL
HBOOT-1.07.0000
MICROP-0850
RADIO-38092.05.0401.4
eMMC-boot
Apr 21 2011,19:49:43
Can I use the HTCDve way to get S-off? Or I need to use the revolutionary way?
I saw they website have list 4 Flyer but I not sure which one I should use to do the s-off
They list are
Flyer (Brightstar) 2.27.1540.31_R
Flyer (TUR Wi-Fi) 2.27.1127.31
Flyer (TUR) 2.27.468.1
Flyer (WWE Wi-Fi) 2.27.1114.31
Flyer (WWE) 2.23.405.3_R
Thank you advise

First update to latest firmware (not honeycomb, which is Android 3.2), and then you can gain S-OFF

Thank you for advise,
The flyer already in Android 2.3.3, what is the last one? How to update the firmware?

wender0800 said:
Thank you for advise,
The flyer already in Android 2.3.3, what is the last one? How to update the firmware?
Click to expand...
Click to collapse
Latest is 2.3.4, you can update through OTA by going to Settings -> About tablet -> System Updates -> Check, and a pop-up will offer you to download the update. Then you can get S-OFF with Revolutionary and be happy.
P.S. Yours is Flyer (WWE) 2.23.405.3_R after the update, you can check the system version in About Tablet

I updated but it still run on Running on Android 2.3.3
The only change is software # from 1.36.405.5 change to 2.00.405.3
any suggestion?

wender0800 said:
I updated but it still run on Running on Android 2.3.3
The only change is software # from 1.36.405.5 change to 2.00.405.3
any suggestion?
Click to expand...
Click to collapse
Update once more. And then you'll be on software 2.23.405.3

I also try one more updated now.
But it did not tell you what is the update will put on the fly system.
How do I know that before I click O.K. to install the download updated?

wender0800 said:
I also try one more updated now.
But it did not tell you what is the update will put on the fly system.
How do I know that before I click O.K. to install the download updated?
Click to expand...
Click to collapse
Excuse me? I didn't understand the question :/

Thank you for help, As you said it changed to software 2.23.405.3 and 2.3.4.
which way is good to get the unit S-off
golden card + Revolutionary way
or HTCdve way to get S-off?

wender0800 said:
Thank you for help, As you said it changed to software 2.23.405.3 and 2.3.4.
which way is good to get the unit S-off
golden card + Revolutionary way
or HTCdve way to get S-off?
Click to expand...
Click to collapse
You can't get S-OFF with HTCdev, it will only unlock the bottloader. To gain S-OFF you need to use revolutionary method. And there's no need in goldcard.

after two updates the H-boot from 1.07 became 1.11.003 now.
Thank you for you help. So, I look a link From globatron,
http://forum.xda-developers.com/showthread.php?t=1194709
So, I can just use this procedure will able to the s-off, root, enable the phone and BT right?

wender0800 said:
after two updates the H-boot from 1.07 became 1.11.003 now.
Thank you for you help. So, I look a link From globatron,
http://forum.xda-developers.com/showthread.php?t=1194709
So, I can just use this procedure will able to the s-off, root, enable the phone and BT right?
Click to expand...
Click to collapse
Sure man, just follow the guide and you'll be a happy Flyer Honeycomb user
Though you can't enable phone capabilities manually, you'll need to install a custom software - either CoolHoney or LeeDroid HC.

I thought the Android 2.3.4 still GB not Honeycomb, correct right.
As you said" First update to latest firmware (not honeycomb, which is Android 3.2), and then you can gain S-OFF"
If I don't to use the Honeycomb, I just like the Flyer able to enable the phone function and BT at current Android 2.3.4. and modify the current rom at
System\build.prop
as ro.ril.reject.cs.ss.enabled=0
ro.ril.reject.mo.ussd.enabled=0
ro.phone.function=1
BT function
ro.bt.profiles = 4270403
service.brcm.bt.ag_supported = 1
or flash some Chines Rom , So I still need to use this http://forum.xda-developers.com/show....php?t=1194709 procedure to do that right?

Hi fatal1ty, Thank you
I got everything done, I flash a stock rom have modified the phone and BT.
It seems working so far.
Thank you for you help, I could not done as the way I want on my flyer without your help. Thank you again.

wender0800 said:
Hi fatal1ty, Thank you
I got everything done, I flash a stock rom have modified the phone and BT.
It seems working so far.
Thank you for you help, I could not done as the way I want on my flyer without your help. Thank you again.
Click to expand...
Click to collapse
You're welcome, mate. Happy using your newly rooted Flyer.

as last time my Flyer already OTA updat to 2.3.4 as your advise
After I use Revolutionary to S-OFF
now the screen show
Revolutionary
Flyer PVT SHIP S-OFF RL
Hboot-6.010.1002
Microp-0850
Radio-3809005.04.10_M
emmc-boot
May 4 2011
After I rooted and flashed a PG41IMG_Gfan_Quens_BT_Phone.zip Rom
That have BT and Phone enabled but it back to Android 2.3.3 again
software # GFAN_P510e_phone
Kernel version 2.6.35.10-gb1cf1af
[email protected]#1
How Can up to the Android 2.3.4?
OTA?

No, no OTA! That way you'll brick the device
Better use FlyHigh ROM, the one you're using now probably based on previous (2.00.405.3) version. You should look at the first post of the ROM thread to see what OS version is it based on.

can I also use RUU way to do that
the Ruu I will use is this
RUU_Flyer_hTC_Asia_HK_2.27.708.1_Radio_20.3504.30.089BU_3809.07.04.06_M_release_204709_signed.exe
I have not find it yet on line

wender0800 said:
can I also use RUU way to do that
the Ruu I will use is this
RUU_Flyer_hTC_Asia_HK_2.27.708.1_Radio_20.3504.30.089BU_3809.07.04.06_M_release_204709_signed.exe
I have not find it yet on line
Click to expand...
Click to collapse
No, you can't use the RUU either, because you're rooted and with S-OFF.
Remember: official software on rooted/s-off'd device = brick
Just use another custom ROM that is built on 2.23.405.3

HI,
I would like explain how to run RUU to update from 2.3.3 to 2.3.4 from stock ROM on my last post question.
I read a guy at China website said he did use RUU with his S-off flyer and updated to 2.3.4 at below link
http://bbs.gfan.com/android-2717771-1-1.html
On #3 he said he run RUU_Flyer_hTC_Asia_HK_2.27.708.1_Radio_20.3504.30. 089BU_3809.07.04.06_M_release_204709_signed.exe in his window computer
without flyer connect to computer and before close the RUU program, find the ROM.zip in the computer's Temp folder and copy it out, rename to PG41IMG.zip and put it into the root SD card. to flash the rom.
after flashed, delete PG41IMG.zip from SD card and copy the other one PG41IMG.zip (4.52MB) to get recovery back and run su-2.3.6.3-efgh-signed.zip to root.
Have you or anyone have try this way? Is this way will work? Would you please advise your comments?

Related

[Q] I can't unroot HTC Legend and back to stock rom

Hi all , please help because I can't unroot my HTC Legend and back to stock rom.
Specs are:
Legend PVT Ship S-On
HBOOT - 1.02.0000
MICROP - 0816
RADIO - 7.13.35.05
DEC 23 2011
I've tried to install the RUU from HTC DEV but I can't..give me an error whe toll is Updating Signature - Error 140 Bootloader Version Error
Then I've relocked the bootloader on HTC Dev...and nothing
What am I doing wrong? I have to switch to S-OFF to unroot it? or to downgrade the HBOOT to 1.01 as I have it before to root it?
Thanks
Which guide did you use to root?
I believe the best way now is to use the boot unlocker method, guides are found in this forum section.
Therefore you will not need to downgrade or any of those tedious methods we once had to do.
I've tried to use the tool from htc dev to instal the _WiFi security fix_RUU_Legend_Froyo_S_HTC_WWE_3.15.405.6_Radio_47.51.35.17_7.13.35.05_release_222317_signed...but I can't...gives me error when it try to Update Signature to my phone.
I just want to reinstall the stock rom because the battery before to root took me about 2 days....and now when it's rooted and with custom rom it takes me less then a day and has some bugs ( now i have this rom: [ROM][RC4b][10.09.2011] Gingerbread 2.3.3 with HTC Sense 2.1+ )
Use hack4legend from this thread. Then downgrade to an older RUU and install all updates via OTA. You'll get back to HBOOT 1.01 and an untouched bootloader.
^
Sent from my Legend
cyRq said:
Use hack4legend from this thread. Then downgrade to an older RUU and install all updates via OTA. You'll get back to HBOOT 1.01 and an untouched bootloader.
Click to expand...
Click to collapse
Hey thanks...and with this will work? I will try also this method....hope to work.
madoxx85 said:
Hey thanks...and with this will work? I will try also this method....hope to work.
Click to expand...
Click to collapse
It should work.
Sent from my Legend
Stevemotto said:
It should work.
Sent from my Legend
Click to expand...
Click to collapse
tahnk you thank you...IT WORKED!!!!11 YEEEEYYYY...NOW I HAVE MY PHONE BACK TO STOCK ROM...AND NOW IS UPDATING WITH FRYO ( BECAUSE I HAVE DOWNGRADE IT IN THE PROCESS TO UNROOT).
THANKS MAN
I'm happy for ya
Sent from my Legend

How to root HC OTA 3.62.X.X , I am willing to pay even !!!! (SOLVED)

Here is where I am confused
I had my Flyer 3G 32GB . S-OFF'd by Revolutionary when I was on GB
Then I had installed LeeDroid's HC rom and I was on HC, everything is fine till now.
Recently I wanted to go back to GB but I could not ( I got some HTC screens so I gave up) then I flashed GLOBATRON'S methods and I am on S-OFF, Rooted HC 3.55.x.x stock Rom from his thread.
Currently there is a new OTA for my 3.55.x.x ROM and I have the RUU file for the OTA.
After running the OTA RUU , now my Flyer is on HC 3.62.x.x but I can not root it. CWM method is not working on the Revolutionary site as this rom is HC , I manually flashed the CWM img thru fastboot but no go.
My question is how to root my Flyer again after flashing the RUU file of the OTA 3.62.x.x from rooted 3.55.x.x
I know that if I flash a rom like Leedroid's it will work, but instead I want to flash the Original OTA RUU and the root it somehow. There is NO instructions on how to do it for Flyer.
My question is how to flash the CWM and SU onto my new HC 3.62.x.x Rom
Can I somehow remove the ROM and RADIO of the already rooted 3.55.x.x by Globatron and replace with ROM and RADIO of 3.62.x.x ? If yes how to do it ?
Or what to do ?
Pls Help somebody
I Think you must: 1 Downgrade 2 S-Off and root
I think these two threads could help you
http://forum.xda-developers.com/showthread.php?t=1428104
http://forum.xda-developers.com/showthread.php?t=1358758
No.......
I have read these 2 forums many many times. My question is one step ahead of that thread. We all know how to root 3.55.x.x , I want to root 3.62.x.x
doublecheese said:
No.......
I have read these 2 forums many many times. My question is one step ahead of that thread. We all know how to root 3.55.x.x , I want to root 3.62.x.x
Click to expand...
Click to collapse
Sorry, I can't help you, I know only these two tutorial...
sb3n2 said:
Sorry, I can't help you, I know only these two tutorial...
Click to expand...
Click to collapse
I believe, since it is the ota, that you need to complete the steps of the tacoroot/ misc version method of downgrading from globatron and then flash the gb ruu for your device, I don't believe it matters which hboot you have for hc. Then use globatrons honeycomb s off ruu on top of that and bingo! Hope I helped
Sent from my AOKP ICS Flyer using xda app-developers app
doublecheese said:
Here is where I am confused
I had my Flyer 3G 32GB . S-OFF'd by Revolutionary when I was on GB
Then I had installed LeeDroid's HC rom and I was on HC, everything is fine till now.
Recently I wanted to go back to GB but I could not ( I got some HTC screens so I gave up) then I flashed GLOBATRON'S methods and I am on S-OFF, Rooted HC 3.55.x.x stock Rom from his thread.
Currently there is a new OTA for my 3.55.x.x ROM and I have the RUU file for the OTA.
After running the OTA RUU , now my Flyer is on HC 3.62.x.x but I can not root it. CWM method is not working on the Revolutionary site as this rom is HC , I manually flashed the CWM img thru fastboot but no go.
My question is how to root my Flyer again after flashing the RUU file of the OTA 3.62.x.x from rooted 3.55.x.x
I know that if I flash a rom like Leedroid's it will work, but instead I want to flash the Original OTA RUU and the root it somehow. There is NO instructions on how to do it for Flyer.
My question is how to flash the CWM and SU onto my new HC 3.62.x.x Rom
Can I somehow remove the ROM and RADIO of the already rooted 3.55.x.x by Globatron and replace with ROM and RADIO of 3.62.x.x ? If yes how to do it ?
Or what to do ?
Pls Help somebody
Click to expand...
Click to collapse
I believe you would require someone to make you a stock Rooted ROM that can be flashed via CWM
But why do you not want to use of the custom ~ROMs that are already on the market ?
shirtlessrabbit4 said:
I believe, since it is the ota, that you need to complete the steps of the tacoroot/ misc version method of downgrading from globatron and then flash the gb ruu for your device, I don't believe it matters which hboot you have for hc. Then use globatrons honeycomb s off ruu on top of that and bingo! Hope I helped
Sent from my AOKP ICS Flyer using xda app-developers app
Click to expand...
Click to collapse
I am on Globatron's HC 3.55 Stock Rom now, all I want is, I want to flash the stock HC 3.62.x.x and root it afterwards some how !!!!
ioiwillioi said:
I believe you would require someone to make you a stock Rooted ROM that can be flashed via CWM
But why do you not want to use of the custom ~ROMs that are already on the market ?
Click to expand...
Click to collapse
I already used some of them but I wasnt happy with the battery drainage.
I was on Leedroid and battery drain was fast somehow, currently I am on the rooted stock 3.55 and my battery is 80% since I took it off the charge this morning at 8.00am
I used it full time for 1 hours when I was going to work in my car. Normally with Leedroid I could never get 80% at this time since I do regular things with my flyer every work day , such as check my e-mails, facebook, twitter when I am on the 1 hour way to work.
doublecheese said:
I already used some of them but I wasnt happy with the battery drainage.
I was on Leedroid and battery drain was fast somehow, currently I am on the rooted stock 3.55 and my battery is 80% since I took it off the charge this morning at 8.00am
I used it full time for 1 hours when I was going to work in my car. Normally with Leedroid I could never get 80% at this time since I do regular things with my flyer every work day , such as check my e-mails, facebook, twitter when I am on the 1 hour way to work.
Click to expand...
Click to collapse
OK, do you have a copy of the RUU for the version you want ? ?
If you do i will download it and then have a go at doing this for you
ioiwillioi said:
OK, do you have a copy of the RUU for the version you want ? ?
If you do i will download it and then have a go at doing this for you
Click to expand...
Click to collapse
Here is the LINK of the RUU of the OTA
Now I am S-OFF by Revolutionary , and rooted by Globatron's HC 3.55.X.X from this link
This is the info about it :
Instructions Part 2
The large download is a stock HoneyComb 3.55.405.1 for 3G and 3.55.1114.31 for WIFI with the following changes:
Rooted
Busybox
Secure flag turned off on the boot image
Stock recovery replaced by CWM
My Android knowledge tells me , if I replace the ROM.ZIP and RADIO.ZIP of that rom with the pnes from the latest RUU , it can work.
But if it is something else, I wouldn't know it anyway
Quick Note
I have not had any reports of battery drainage on my ROM, its listed as Senseless 4.1.0 in the threads, maybe give that a go ?
ioiwillioi said:
I have not had any reports of battery drainage on my ROM, its listed as Senseless 4.1.0 in the threads, maybe give that a go ?
Click to expand...
Click to collapse
As it is SENSELESS , I did not try it, 'cause I like the SENSE
doublecheese said:
As it is SENSELESS , I did not try it, 'cause I like the SENSE
Click to expand...
Click to collapse
In that case ld try virtuos rom its fast and reliable give that a go first im working on this still as well i just think vietuous rom would be good for you to try
Anybody ? I am willing to pay for a solution !!!
doublecheese said:
Here is the LINK of the RUU of the OTA
Now I am S-OFF by Revolutionary , and rooted by Globatron's HC 3.55.X.X from this link
Click to expand...
Click to collapse
Here is a link to a stock ROM which you can flash in recovery that has been pulled from the 3.62.468.1 RUU with root permissions added. Just make sure you take the usual precautions and nandroid backup your device first. If you are fully S-OFF this should work fine.
stock_3.62.468.1_root.zip
MD5: b0b714b280d573965aa8fbecb9da604d
I don't know what the differences are between the ROM I'm using so far and this one, but I'll give it a spin (HTC won't release an update if it didn't fix/add something )
pravus_nephilim said:
Here is a link to a stock ROM which you can flash in recovery that has been pulled from the 3.62.468.1 RUU with root permissions added. Just make sure you take the usual precautions and nandroid backup your device first. If you are fully S-OFF this should work fine.
stock_3.62.468.1_root.zip
MD5: b0b714b280d573965aa8fbecb9da604d
Click to expand...
Click to collapse
Hi thanks, let me try it out now I will report the outcome
Yucko said:
I don't know what the differences are between the ROM I'm using so far and this one, but I'll give it a spin (HTC won't release an update if it didn't fix/add something )
Click to expand...
Click to collapse
As far as I know , this rom has English and Turkish as the main languages.
You might need Morelocale2 from Market to add more locations such as Netherlands and etc.
pravus_nephilim said:
Here is a link to a stock ROM which you can flash in recovery that has been pulled from the 3.62.468.1 RUU with root permissions added. Just make sure you take the usual precautions and nandroid backup your device first. If you are fully S-OFF this should work fine.
stock_3.62.468.1_root.zip
MD5: b0b714b280d573965aa8fbecb9da604d
Click to expand...
Click to collapse
Ok, it is working fine. Thank you very much. It's really appreciated.
Now, what can I do for you ? Remember I said I was willing to pay for it
doublecheese said:
Ok, it is working fine. Thank you very much. It's really appreciated.
Now, what can I do for you ? Remember I said I was willing to pay for it
Click to expand...
Click to collapse
You can do absolutely nothing! :good: Just glad to help.
Here's a link to the radio.img from the 3.62.468.1 RUU if you wanted it. You can flash it to your Flyer in fastboot using;
Code:
fastboot flash radio radio.img
fastboot erase cache
fastboot reboot
If for some reason something doesn't work have globatron's RUU ready at hand.
Radio_20.4801.30.0822U_3822.10.08.07_M
MD5: 6d2479b49d4ace9ae46f352f42401dbb (for the radio.img not radio.zip)

what are my options?

I currently have the following on my recently purchased (used) Amaze (tmobile)
android ver 2.3.4
3.0 htc sense
UNLOCKED
RUBY PVT SHIP S-ON RL
HBOOT 1.90.0008
EMMC-BOOT NOV 1 2011
CLOCKWORK MOD RECOVERY 5.02.6
I also have Hasoon2000 all in one kit if that will help me?
I keep getting asked to install the ota update to ICS but it stops at the android with triangle and exclamation
I would like to upgrade the ICS if possible but not sure what to do from here. I tried to put PH85IMG_Ruby_TMOUS_1.43.531.3_Radio_1.08.550L.19DC_30.66.550L.08D_release_228638_signed on my sd card root and renamed to PH85IMG.zip but when I tried to run it failed.
I thought that would return to stock ? How would I get s-off if that's what I need to do? Just need some direction on my choices here.
Thank you
izzyinstl said:
I currently have the following on my recently purchased (used) Amaze (tmobile)
android ver 2.3.4
3.0 htc sense
UNLOCKED
RUBY PVT SHIP S-ON RL
HBOOT 1.90.0008
EMMC-BOOT NOV 1 2011
CLOCKWORK MOD RECOVERY 5.02.6
I also have Hasoon2000 all in one kit if that will help me?
I keep getting asked to install the ota update to ICS but it stops at the android with triangle and exclamation
I would like to upgrade the ICS if possible but not sure what to do from here. I tried to put PH85IMG_Ruby_TMOUS_1.43.531.3_Radio_1.08.550L.19DC_30.66.550L.08D_release_228638_signed on my sd card root and renamed to PH85IMG.zip but when I tried to run it failed.
I thought that would return to stock ? How would I get s-off if that's what I need to do? Just need some direction on my choices here.
Thank you
Click to expand...
Click to collapse
Relock your bootloader in order to run the stock update. Check out Link below.
http://forum.xda-developers.com/showthread.php?t=1615164&highlight=ota+how+to
death4u said:
Relock your bootloader in order to run the stock update. Check out Link below.
http://forum.xda-developers.com/showthread.php?t=1615164&highlight=ota+how+to
Click to expand...
Click to collapse
yes, this was why my previous attempts were failing, thank you sent.
death4u said:
Relock your bootloader in order to run the stock update. Check out Link below.
http://forum.xda-developers.com/showthread.php?t=1615164&highlight=ota+how+to
Click to expand...
Click to collapse
Awesome reply death4u. To the point...helpful link. No wise crack. I respect that...and it is not even for me. Great way to support the community and lead by example.

[Q] (Q Flyer) is this way to flash a ROM will have problem or not?

HI, Flyer expert
Can any one advise if this way to flash a ROM from RUU will have problem or not?
Current my Flyer has S-off and root at GB 2.3.3
Revolutionary
Flyer PVT SHIP S-OFF RL
Hboot-6.010.1002
Microp-0850
Radio-3809005.04.10_M
emmc-boot
May 4 2011
software # GFAN_P510e_phone
Kernel version 2.6.35.10-gb1cf1af
[email protected]#1
I read a thread at China website, he said, he use a RUU to get the ROM , and flsh into his root and S-off flyer and it can updated his flyer from 2.3.3 to 2.3.4 at this link http://bbs.gfan.com/android-2717771-1-1.html
I would like translation his steps to explain how he run RUU to update from 2.3.3 to 2.3.4 from stock ROM. for someone not able to read the Chinese website.
His step are
#1 the flyer must is ship S-off
#2 Download RUU_Flyer_hTC_Asia_HK_2.27.708.1_Radio_20.3504.30. 089BU_3809.07.04.06_M_release_204709_signed.exe to window's computer.
#3 he run RUU_Flyer_hTC_Asia_HK_2.27.708.1_Radio_20.3504.30. 089BU_3809.07.04.06_M_release_204709_signed.exe in his window computer
without flyer connect to computer and before close the RUU program, find the ROM.zip in the computer's Temp folder and copy it out, rename to PG41IMG.zip and put it into the root of his SD card. to flash the PG41IMG.zip rom.
#4 after flashed the PG41IMG.zip, delete PG41IMG.zip from SD card and copy the other one PG41IMG.zip (4.52MB) to SD card again, to run it to get recovery back
#5 run su-2.3.6.3-efgh-signed.zip to root.
Have anyone try this way before? Is this way will brick my flyer?
Would you please advise your comments?
Can I ask, why do you need an ASIAN ROM?
Because I need to able to chart with my friend at Taiwan with Chinese character.
wender0800 said:
Because I need to able to chart with my friend at Taiwan with Chinese character.
Click to expand...
Click to collapse
Well, can't you just change the system language and/or language to Taiwanian? As I know, WWE ROMs have multiple languages, including the ones from Asia. Plus you can use MoreLocale2 from Goolge Play Market to get even more languages, no need to use Asian ROMs. Plus, if you were going to flash one - you'd have to use Goldcard probably (because you were going to flash a ROM which is not suited for your region
I wish I have choice to use custom Rom because it have something not work and something work. Current in my flyer is Stock Rom with enable the y phone function.
I also read a thread there is anyway to run RUU , it said that it need to modify back to original Build.prop and restore the original Recovery back. then will run RUU with no problem. I just not ready to try that until see more advise.
But right now I already flash the ROM is not in my region.
The Rom I flash is either form Taiwan or Hon Kong region.
I get the Rom from http://forum.xda-developers.com/showthread.php?t=1610925
That list as Stock ROOTED with Phone (slightly modified to enable phone)
But it's outdated with Android 2.3.3. As I told you, you could either flash LeeDroid GB or FlyHigh ROM and get phone fucntionality
Fatal1ty_18_RUS said:
Well, can't you just change the system language and/or language to Taiwanian? As I know, WWE ROMs have multiple languages, including the ones from Asia. Plus you can use MoreLocale2 from Goolge Play Market to get even more languages, no need to use Asian ROMs. Plus, if you were going to flash one - you'd have to use Goldcard probably (because you were going to flash a ROM which is not suited for your region
Click to expand...
Click to collapse
right now, I have two backup Rom
one is Stock ROOTED with Phone (slightly modified to enable phone) Chiness version
2.3.3 (root)
the other one is original one (U.K. version) 2.3.4 (root)
I can't find how to get more language into the (U.K. version) 2.3.4 (root) one.
Use MoreLocale2 from Market
Fatal1ty_18_RUS said:
Use MoreLocale2 from Market
Click to expand...
Click to collapse
I will try that tonight, Thank you.
Fatal1ty_18_RUS said:
Use MoreLocale2 from Market
Click to expand...
Click to collapse
Last night, I flash back the UK version back up Rom,
After I installed MoreLocale2, when I set the flyer to Taiwan, it just make all the icon name from English to Chinese. It did give me the Chinese keyboard but I don't know how to use. The input I like to use is hand writer, write on the screw and flyer find the word for me.
I find a App in google play
https://play.google.com/store/apps/...sMSwxLDEsIm5ldC5oY2lpbGFiLnNjdXRnUGVuLklNRSJd
it is ok to use but it not like the Chinese Rom that smooth to use. I guess, I can live with that.
The other question relate to this one,
If I buy a new flyer as the current one
with UK version 3g 32GB
Running on 2.3.3
Kernel version:
2.6.35.10-gb1cf1af
[email protected]#1
Baseband version:
20.35.30.089bu_3809.050401.04_M
software # 1.36.405.5
FLYER PVT SHIP S-ON RL
HBOOT-1.07.0000
MICROP-0850
RADIO-38092.05.0401.4
eMMC-boot
Apr 21 2011,19:49:43
before I doing anything
Can I use the RUU to update from the UK version to Hon-Kong version?
after then S-off and Root, and back up the Hon-Kong version ROM
and copy the Hon-Kong version ROM out and use it to flash on my current Flyer?
Will this Work?
No, it won't.
I repear: you CANNOT run a RUU for any region other than yours. You need to put it as PGxxIMG.zip and flash it automatically through the bootloader (using the goldcard method).
Fatal1ty_18_RUS said:
No, it won't.
I repear: you CANNOT run a RUU for any region other than yours. You need to put it as PGxxIMG.zip and flash it automatically through the bootloader (using the goldcard method).
Click to expand...
Click to collapse
I am still confused. If as you said that, why I can flashed a Chinese Rom ( as the PGxxIMG.zip file put at my root SD card) into the UK version?
The Chinese ROM I used is from this link http://forum.xda-developers.com/showthread.php?t=1175589
Is this ROM (RUU_Flyer_hTC_Asia_HK_2.27.708.1_Radio_20.3504.30. 089BU_3809.07.04.06_M_release_204709_signed) have any difference than the one I talking about?
Please explain more , Thank you for your patience and advise.
I will run the Ruu like this way
#3 he run RUU_Flyer_hTC_Asia_HK_2.27.708.1_Radio_20.3504.30. 089BU_3809.07.04.06_M_release_204709_signed.exe in his window computer
without flyer connect to computer and before close the RUU program, find the ROM.zip in the computer's Temp folder and copy it out, rename to PG41IMG.zip and put it into the root of his SD card. to flash the PG41IMG.zip rom.
wender0800 said:
Is this ROM (RUU_Flyer_hTC_Asia_HK_2.27.708.1_Radio_20.3504.30. 089BU_3809.07.04.06_M_release_204709_signed) have any difference than the one I talking about?
Click to expand...
Click to collapse
Yes it does. The one you mentioned (which is on Android 2.3.3) is a MODIFIED ROM, so that it could work even on European models, while the RUU is supposed to be used only with Asian models. So, if you want to have a stock Chinese/Asian ROM - you need to follow the Goldcard method and flash it on your Flyer (which is a UK 3G one, right?)
Fatal1ty_18_RUS said:
Yes it does. The one you mentioned (which is on Android 2.3.3) is a MODIFIED ROM, so that it could work even on European models, while the RUU is supposed to be used only with Asian models. So, if you want to have a stock Chinese/Asian ROM - you need to follow the Goldcard method and flash it on your Flyer (which is a UK 3G one, right?)
Click to expand...
Click to collapse
Thank you again.
Is I still can make the Goldcard now with my flyer?
Is any link can show me how to use the Goldcard to run RUU? I cold not find in this forum.
wender0800 said:
Thank you again.
Is I still can make the Goldcard now with my flyer?
Is any link can show me how to use the Goldcard to run RUU? I cold not find in this forum.
Click to expand...
Click to collapse
Search around Desire S forums
Fatal1ty_18_RUS said:
Yes it does. The one you mentioned (which is on Android 2.3.3) is a MODIFIED ROM, so that it could work even on European models, while the RUU is supposed to be used only with Asian models. So, if you want to have a stock Chinese/Asian ROM - you need to follow the Goldcard method and flash it on your Flyer (which is a UK 3G one, right?)
Click to expand...
Click to collapse
Are you saying even through if my flyer has S-off and root still maker the glocard and flash with different region Stock Rom?
is my understand correct?
wender0800 said:
Are you saying even through if my flyer has S-off and root still maker the glocard and flash with different region Stock Rom?
is my understand correct?
Click to expand...
Click to collapse
No, you can't RUU on rooted and S-OFF'ed device. That will result in a brick.
Fatal1ty_18_RUS said:
No, you can't RUU on rooted and S-OFF'ed device. That will result in a brick.
Click to expand...
Click to collapse
even use the goldcard ? if I put PG41IMG.zip on the goldcard will still brick?

Original ROM-kernel source

hello guys
i need the stock rom of the htc evo3d to revert it back to the original situation. every site i entered had wrong files or destroyed links. if anyone knows also the exact kernel source of this rom would help me extremely lot. i need all these for a project about memory extraction.
thanks a lot!
http://forum.xda-developers.com/showthread.php?t=2094402
EM|NEM said:
http://forum.xda-developers.com/showthread.php?t=2094402
Click to expand...
Click to collapse
which one of this list that i can use for downgrade my android version to gingerbread 2.3.4 ?
mine : HTC EVO 3D GSM,rooted,S-oN,KingCobraICS v.1.6 , downgrading to 2.3.4 is for downgrade hboot from 1.53.0007 to 1.49.0007 and get S-off (the whole tutorials says that must be done on gingerbread 2.3.4 CMIIW)
u cant go back to gingerbread by just running an RUU. but you can get s-off on ICS using the wire trick method. so relock bootloader and run an ICS RUU. then follow the instructions at http://unlimited.io/juopunutbear.htm to get s-off. then you can downgrade hboot

Categories

Resources