Hi
since i put the new rom, the 2.3.3 from samfirware, i have a problem to lock the phone, because i press the buttin on/off and the only thing that do is to shut down the display of the phone. i dont know if is because of the rom or because of some aplication that i install there.
if someone could help i would apreciate
thanks and greatting from Portugal
have you tried reflashing the rom, as the error might be bcoz of the rom not being flashed properly.
vlc_marcos said:
Hi
since i put the new rom, the 2.3.3 from samfirware, i have a problem to lock the phone, because i press the buttin on/off and the only thing that do is to shut down the display of the phone. i dont know if is because of the rom or because of some aplication that i install there.
if someone could help i would apreciate
thanks and greatting from Portugal
Click to expand...
Click to collapse
Check the settings for the lock screen option.
if that doesnt work then reflash the rom it might not have been properly flashed
hit thanks if helped
hello guys! plz help me soon
my o1 dropped from the table and its backpanel opened and battery was out and now its home button is not working anymore
To confirm that its now hardware problem or software problem i reboot my phone to my recovery and choose key test option there......there the home button worked but it does not work when phone is switched on...... plz help guyz!!
i have tried rebooting several times and reflashed the kernal :'(
Reflash the ROM...
I was just about to say that, reflash the rom
Sent from my LG-P500 using xda premium
Backup first
ty to all u guyz...reflashing the ROM worked
The thread can be closed now
Hi, I did a ota update when i was in unlocked bootloader.Later i realised and i locked the bootloader.i falshed stock rom.the phone functioned normally.after 4 days i lost the functionality of my touch.soft keys works normally.i can use my phone only using the keyboard since touch is not working.i have done all the possibilties to recover my touch.what i want to know is that if i replace the digitizer will it work normally.any one can help me
Hi, I am having problem with my samsung galaxy s6102.I flashed my phone with S6102_DDLG1_ODDLF1_DDLG1_INU_wipe_by_manoranjan2050.org using Odin.After flashing it got stuck in the samsung logo then kept restarting...Then i removed the battery and put it in again.Then i could see the setup screen where it says "touch the android to begin".But the touch screen is not working after that .Volume,power button and home button works fine only the touch screen not working.. I flashed it many times but the touch screen wont work. Please help me how to solve this problem.Thanks
Me too! Is there anybody who knows a fix??
sanjoyd4 said:
Hi, I am having problem with my samsung galaxy s6102.I flashed my phone with S6102_DDLG1_ODDLF1_DDLG1_INU_wipe_by_manoranjan2050.org using Odin.After flashing it got stuck in the samsung logo then kept restarting...Then i removed the battery and put it in again.Then i could see the setup screen where it says "touch the android to begin".But the touch screen is not working after that .Volume,power button and home button works fine only the touch screen not working.. I flashed it many times but the touch screen wont work. Please help me how to solve this problem.Thanks
Click to expand...
Click to collapse
I have got the same probleme, and have tried every available solution....I hope not! Are there any kind of fix beside flashing with Odin(with & without Pit-file), tried flashing new Rom.....
After flashing everything looks good until I have to punch in Pin for my Sim-card......No go:crying:
Any tip will be appreciated
I found the solution Firmware(Chile) for Gt-s6102B did it!!! Downloaded (S6102BVJMC2_S6102BCHOMD1_CHO)
from sammobile(free registration needed)
used Odin 3 v3.07..........(run as admin)
Only add "pad-file"....
Hit start, and a few minutes later....Voila..Touch is working again
sanjoyd4 said:
Hi, I am having problem with my samsung galaxy s6102.I flashed my phone with S6102_DDLG1_ODDLF1_DDLG1_INU_wipe_by_manoranjan2050.org using Odin.After flashing it got stuck in the samsung logo then kept restarting...Then i removed the battery and put it in again.Then i could see the setup screen where it says "touch the android to begin".But the touch screen is not working after that .Volume,power button and home button works fine only the touch screen not working.. I flashed it many times but the touch screen wont work. Please help me how to solve this problem.Thanks
Click to expand...
Click to collapse
http://www.mediafire.com/download/t...MA3_S6102OJPMA3_S6102XXMA2_HOME.tar.part1.rar
http://www.mediafire.com/download/1...MA3_S6102OJPMA3_S6102XXMA2_HOME.tar.part2.rar
odin 3.07
POST RESULT AFTER
B.R
ELGHANDOR
GT-S6102 After flash touchpad not working Solution.....!!
1. Flash with Odin307
2.file is S6102DDMF4_S6102ODDMF4_S6102DDMF4_HOME.tar.md5
Thanks in Arabic ...... شكرا
elghandor said:
http://www.mediafire.com/download/t...MA3_S6102OJPMA3_S6102XXMA2_HOME.tar.part1.rar
http://www.mediafire.com/download/1...MA3_S6102OJPMA3_S6102XXMA2_HOME.tar.part2.rar
odin 3.07
POST RESULT AFTER
B.R
ELGHANDOR
Click to expand...
Click to collapse
Thanks in Arabic .... شكرا
:good: :good:
I am too looking for solution
I also got the same problem can you tell me how to flash the mobile? As i am noob in this things! can you step by step instructions??
teiningen said:
I have got the same probleme, and have tried every available solution....I hope not! Are there any kind of fix beside flashing with Odin(with & without Pit-file), tried flashing new Rom.....
After flashing everything looks good until I have to punch in Pin for my Sim-card......No go:crying:
Any tip will be appreciated
I found the solution Firmware(Chile) for Gt-s6102B did it!!! Downloaded (S6102BVJMC2_S6102BCHOMD1_CHO)
from sammobile(free registration needed)
used Odin 3 v3.07..........(run as admin)
Only add "pad-file"....
Hit start, and a few minutes later....Voila..Touch is working again
Click to expand...
Click to collapse
teiningen said:
I have got the same probleme, and have tried every available solution....I hope not! Are there any kind of fix beside flashing with Odin(with & without Pit-file), tried flashing new Rom.....
After flashing everything looks good until I have to punch in Pin for my Sim-card......No go:crying:
Any tip will be appreciated
I found the solution Firmware(Chile) for Gt-s6102B did it!!! Downloaded (S6102BVJMC2_S6102BCHOMD1_CHO)
from sammobile(free registration needed)
used Odin 3 v3.07..........(run as admin)
Only add "pad-file"....
Hit start, and a few minutes later....Voila..Touch is working again
Click to expand...
Click to collapse
thanks , i was having the same problem so i followed your steps and it worked for me (GT-s6102B) but it was missing Arabic so i flashed S6102JPMA3_S6102OJPMA3_S6102XXMA2_HOME.tar.md5 (GT-s6102) and it worked and arabic was installed
many thanks again
so, google brings this up for the problem, but i couldn't get odin to flash the full package from sammobile to the 6102B, getting splitfus2 to work was a bit of a riddle (64biit version doesn't have necessary libraries for it in cygwin need 32bit version to work) anyways, i created a few of them thought it might help anyone else with this issue and who are less tech savvy. these worked for me, there are BR and Chile roms for the 6102B, flashing non B roms seem to leave touchscreen unresponsive after flashing the phone.
links:
S6102B_VJMA2_ZTRMA2_VJMA2_wipe_by_SplitFUS2.zip 136.7 MB
https://mega.co.nz/#!TlAg0DyT!jlhrrTmg-EMTLLrMAXlQucfrUceG_dxrYQs00kEz058
S6102B_VJMC2_CHOMD1_VJMC3_wipe_by_SplitFUS2L.zip 123.0 MB
https://mega.co.nz/#!yxZCFJRJ!FzHpXR3uD7YjGRhiHN2BsNktqw9E7KJE88F9WE9UmMA
S6102B_VJME1_CHOME1_VJME1_wipe_by_SplitFUS2.zip 122.2 MB
https://mega.co.nz/#!vtR23CwJ!Bek7_29TNu3RbRVUjHqGAYBLVEwgUHieg6nOb0aN1wc
S6102B_VJME1_ZTOMI1_VJME1_wipe_by_SplitFUS2.zip 135.3 MB
https://mega.co.nz/#!25YQyD6T!ygTbUseF4uWQCA1hzEkiOS8zT2YSH1QMXkLGdwh0F6I
take no credit, just used splitfus2 to split the tar.md5 from sammobile and uploaded them to mega. worked to fix the 6102B, it went to reboot loop, flashed a 6102 rom with which touch didn't work.
sorry to bring ancient thread up, if anyone has this issue google will make it an easy fix pointing to this thread as it did for me.
Guys I need a help, my S3 touchscreen is not responding, the screen is normal but when I touch there is nothing happen, I think the problem is when i want to install CWM using odin, when the flash completed the screen got unknown error. Then I flash using stock ROM and no luck, also booting time is take a longtime not as ussual. what should I do?
Usually happens after flashing a firmware/recovery for the wrong model of S3, if screen is still not working in recovery then you'll need a new screen assembly as the digitizer in the old one is blown.