Need Root after Replacement - AT&T Samsung Galaxy Note I717

Had the PBA replaced twice now and i just got the phone back without root. I need to get it rooted but no matter how googling or odin flashing nothing works. I can communicate with Kies and odin and thats working i just need the .tar's to get it done. Can someone provide the .tar's?
Sidenote: why wont dev's make odin flashable roms anymore? its a lot easier.

http://forum.xda-developers.com/showthread.php?t=1740367
Start here:
It's the full meal deal thread, and has eveything you will need...g

gregsarg said:
http://forum.xda-developers.com/showthread.php?t=1740367
Start here:
It's the full meal deal thread, and has eveything you will need...g
Click to expand...
Click to collapse
yeah no matter what i try odin gets stuck at boot.img.

yikes....
your the 4th person this week with that same issue.....
so the odin flash process wont complete ? or you have the stock recovery back after the reboot ?

Related

Original ROM

We need a publication of someone's /system backup or originally shipped tar, etc. I have a non-recoverable issue that requires a new flash of system, but Sprint store repair locations are unable to assist, nor is Samsung per IT.
I have a replacement device coming. However, can we get an original dump from someone and fileshare those img's to help others recover?
thewayofwright said:
We need a publication of someone's /system backup or originally shipped tar, etc. I have a non-recoverable issue that requires a new flash of system, but Sprint store repair locations are unable to assist, nor is Samsung per IT.
I have a replacement device coming. However, can we get an original dump from someone and fileshare those img's to help others recover?
Click to expand...
Click to collapse
If you searched I think you would if found this... but http://forum.xda-developers.com/showthread.php?t=1730733
Sent from my SPH-L710... press thanks if someone helps you
and this. lol
http://forum.xda-developers.com/showthread.php?t=1727171
xtrezpasor said:
If you searched I think you would if found this... but http://forum.xda-developers.com/showthread.php?t=1730733
Sent from my SPH-L710... press thanks if someone helps you
Click to expand...
Click to collapse
THANKS!!!! Sorry, no, did not look in GENERAL
I think the common question everyone has or is looking for is the usual "Restore/Return to Stock" Odin tar package.. Not just a Nandroid or a Odin tar of the boot.img but a full Odin tar package.
So until that is released by Sammy or created by one of the devs... SOL...
Paul627g said:
I think the common question everyone has or is looking for is the usual "Restore/Return to Stock" Odin tar package.. Not just a Nandroid or a Odin tar of the boot.img but a full Odin tar package.
So until that is released by Sammy or created by one of the devs... SOL...
Click to expand...
Click to collapse
Yes this is exactly what I need. My phone is bricked (didnt touch system files or flash any ROMs...not sure why its bricked) and haven't had any success getting back into CWR although i can still boot into download mode. Flashing the stock boot image doesn't do anything. I guess i will try reflashing CWR in Odin when I get off work and flash my backup if i can get in. Withdrawals from my GS3 is killing me.
pizzlewizzle said:
Yes this is exactly what I need. My phone is bricked (didnt touch system files or flash any ROMs...not sure why its bricked) and haven't had any success getting back into CWR although i can still boot into download mode. Flashing the stock boot image doesn't do anything. I guess i will try reflashing CWR in Odin when I get off work and flash my backup if i can get in. Withdrawals from my GS3 is killing me.
Click to expand...
Click to collapse
better report it lost & pay that deductible LOL
Thread closed.

installed cwm instead of rooting first onto a clean sgs2 ..i need help please?

hi
SHORT VERSION
installed cwm via odin onto sgs2 then cf root after.
phone goes into recovery and cwn but wont boot. (boots to logo then goes off)
i have original stock rom and .dll files
scared to flash through odin using .pit with .dll
LONG VERSION
ok let me slap my self round my own head.
i should of known better as i have rooted and installed cwn
so many times before but on this occasion i blame tiredness and
people yapping in my ears.
what i have did was to installed cwm onto a new 4.0.3 sgs2 phone via odin (pda then start)
then after noting my mistake i tried to boot the phone. it boot to logo screen then switch off.
i decided to cf root it with odin (again only pda and start) but again the phone boots to logo and triangle
then goes off.
maybe im in good luck the phone goes into recovery mode and cwn but wont boot.
i have the stock rom files that i downloaded
1, I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5
2. SS_DL.dll
with the above files i thought i could use the .PDA and ss_dl.dll for the .PIT in odin but im not 100%
sure since i do know that IT usage in odin will mess up the phone.
please can some one help me out thanks
HTCdia
.dll is not a .pit file...
thanks ctomgee
im glad i didn't go ahead because that .dll should of been a .pit
the strange thing is i downloaded from Samsung site lol.
can you make suggestions as to how best to proceede. thanks
HtcDia said:
hi
SHORT VERSION
installed cwm via odin onto sgs2 then cf root after.
phone goes into recovery and cwn but wont boot. (boots to logo then goes off)
i have original stock rom and .dll files
scared to flash through odin using .pit with .dll
LONG VERSION
ok let me slap my self round my own head.
i should of known better as i have rooted and installed cwn
so many times before but on this occasion i blame tiredness and
people yapping in my ears.
what i have did was to installed cwm onto a new 4.0.3 sgs2 phone via odin (pda then start)
then after noting my mistake i tried to boot the phone. it boot to logo screen then switch off.
i decided to cf root it with odin (again only pda and start) but again the phone boots to logo and triangle
then goes off.
maybe im in good luck the phone goes into recovery mode and cwn but wont boot.
i have the stock rom files that i downloaded
1, I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5
2. SS_DL.dll
with the above files i thought i could use the .PDA and ss_dl.dll for the .PIT in odin but im not 100%
sure since i do know that IT usage in odin will mess up the phone.
please can some one help me out thanks
HTCdia
Click to expand...
Click to collapse
Do not use the .pit file unless you understand 100% what you're doing, as its one of the easiest ways to brick your device.
I have a few questions before I can help you.
Can you get into download mode?
- If you can go to www.sammobile.com, download a stock firmware, flash through odin. If it still doesnt boot, try to wipe data/factory reset through 3e (stock recovery), then try to boot again.
-- After you do that, flash a cf-kernel to root the device.
does odin support .md5 file i have in the pda ..... man im really getting gittery
thanks
kilometers4 said:
Do not use the .pit file unless you understand 100% what you're doing, as its one of the easiest ways to brick your device.
I have a few questions before I can help you.
Can you get into download mode?
- If you can go to www.sammobile.com, download a stock firmware, flash through odin. If it still doesnt boot, try to wipe data/factory reset through 3e (stock recovery), then try to boot again.
-- After you do that, flash a cf-kernel to root the device.
Click to expand...
Click to collapse
thnaks kilometers4
1, yes i can get into download and cwm
2, the recovery i got is cwm..... 3 buttons vol key up
the stock file i have is I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5
but know im worried about the .md5 at the end
ill be back later with a progress since sammobile takes long to download if you dont have a paid account
tnaks
Yes, you can flash .md5 files in Odin.
That file is a single package and should contain everything you need. Flash via Odin in the PDA section. Don't touch anything else.
Also. You are SURE you have an i9100, right?
HtcDia said:
thnaks kilometers4
1, yes i can get into download and cwm
2, the recovery i got is cwm..... 3 buttons vol key up
the stock file i have is I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5
but know im worried about the .md5 at the end
ill be back later with a progress since sammobile takes long to download if you dont have a paid account
tnaks
Click to expand...
Click to collapse
Don't worry about the .md5. It should flash the same.
But I would try to start over completely and download a firmware from www.sammobile.com.
Sent from my GT-I9100 using xda premium
ctomgee said:
Yes, you can flash .md5 files in Odin.
Click to expand...
Click to collapse
thanks again..... ok i popped over to http://www.sammobile.com/firmware/ logged in
i can only see 5 firmwares there and onoe for sweden.
so im gonna risk it for the biscuit lol ..... and run my I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5
through odin using just using pda and start. ...... here goes my friend 4000kr (kr=Krono) mobile phone.
ill be back shortly with the results lol
thanks
kilometers4 said:
Don't worry about the .md5. It should flash the same.
But I would try to start over completely and download a firmware from www.sammobile.com.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
i can understand the logic but i have click on both of the firmware buttons on the site but cannot see i9100xxlpq
ill check there again before going straight for odin
tnaks
HtcDia said:
i can understand the logic but i have click on both of the firmware buttons on the site but cannot see i9100xxlpq
ill check there again before going straight for odin
tnaks
Click to expand...
Click to collapse
You also have to choose device, then operating system, then device model, then region.
lol thanks alot it worked
that saved me a few 1000kr to buy my friend a new phone
ctomgee and kilometers4
------------------------------------
i ill suggest this i can donate something to you guys as a
appreciation for your time and knowledge, i can do this for
the end of month when i get paid.
you guys saved me more than money. you guys saved my respect too
thanks
HtcDia said:
lol thanks alot it worked
that saved me a few 1000kr to buy my friend a new phone
ctomgee and kilometers4
------------------------------------
i ill suggest this i can donate something to you guys as a
appreciation for your time and knowledge, i can do this for
the end of month when i get paid.
you guys saved me more than money. you guys saved my respect too
thanks
Click to expand...
Click to collapse
Don't worry about it dude, at least for me. I don't answer questions for donations; I just like helping people. That's why I don't have a donate link on my profile.
ctomgee said:
Don't worry about it dude, at least for me. I don't answer questions for donations; I just like helping people. That's why I don't have a donate link on my profile.
Click to expand...
Click to collapse
Yeah, don't worry about it. I'm not doing it for money
Sent from my GT-I9100 using xda premium
ok im sorry, i hope i didnt offend any of you
and i really appreciate this.
much thanks and respects for your characters.
your integrity's are worth its weight more than diamonds and gold
till next time
HTCDIA

NAND Write Start stalls

First I read all the stickies and tried every installation to go back to stock but Odin just freezes up. Also tried different USB ports and and computers and same results. I can only go into download mode.
You may need to repartition. Not knowing the history of how your phone got to where it is now, I can't be sure. Can you give me a complete rundown of your issue?
creepyncrawly said:
You may need to repartition. Not knowing the history of how your phone got to where it is now, I can't be sure. Can you give me a complete rundown of your issue?
Click to expand...
Click to collapse
How would I go about repartitioning the phone? I full wipe and flashed the new Shostock3 and it was doing fine. The next day when I woke up my phone had the sleep of death. The Galaxy S2 logo was stuck and I tried to get into recovery and it only showed half of the screen and was frozen. Now the screen says Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Go to the Download Repository. The link is in my sig.
First, try flashing full stock Gingerbread. Use the download under the heading I777UCKH7-CL503881 Stock Binaries. This is the full distribution which contains the bootloaders. It doesn't matter whether you use the one-click downloader, or the tar.md5 file with Odin stand alone. If this flash completes, then you're recovered. Follow the guides to root and install a custom Gingerbread kernel, then flash back to SHOstock3 or whatever firmware you want.
If this flash does not complete, then download the I777 UCKH7 PIT and use that in Odin stand alone with the above tar.md5 file. Insert the tar in the PDA slot, the pit in the PIT slot, and check repartition, then flash.
creepyncrawly said:
Go to the Download Repository. The link is in my sig.
First, try flashing full stock Gingerbread. Use the download under the heading I777UCKH7-CL503881 Stock Binaries. This is the full distribution which contains the bootloaders. It doesn't matter whether you use the one-click downloader, or the tar.md5 file with Odin stand alone. If this flash completes, then you're recovered. Follow the guides to root and install a custom Gingerbread kernel, then flash back to SHOstock3 or whatever firmware you want.
If this flash does not complete, then download the I777 UCKH7 PIT and use that in Odin stand alone with the above tar.md5 file. Insert the tar in the PDA slot, the pit in the PIT slot, and check repartition, then flash.
Click to expand...
Click to collapse
So I tried both the one-click downloader and flash doesn't not complete, same goes for odin and PIT file.
selw0nk said:
So I tried both the one-click downloader and flash doesn't not complete, same goes for odin and PIT file.
Click to expand...
Click to collapse
If you didn't try it already, now go back and flash just the tar.md5 file without the pit, again, and see if it will complete.
creepyncrawly said:
If you didn't try it already, now go back and flash just the tar.md5 file without the pit, again, and see if it will complete.
Click to expand...
Click to collapse
Just did and it is stuck at NAND Write Start!! My phone might have a hardware issue.
selw0nk said:
Just did and it is stuck at NAND Write Start!! My phone might have a hardware issue.
Click to expand...
Click to collapse
Yes, I was hoping that the problem is not hardware, but it was a thought from the beginning, given the sequence of failure. Is the phone by chance still under warranty?
Let's don't give up yet, though.
Things to try, then try to flash the full firmware in between.
1. Use Odin stand alone to flash just the I777 secondary bootloader.
2. Use Odin stand alone to flash just the param.lfs.
Try the instructions in this post.
creepyncrawly said:
Yes, I was hoping that the problem is not hardware, but it was a thought from the beginning, given the sequence of failure. Is the phone by chance still under warranty?
Let's don't give up yet, though.
Things to try, then try to flash the full firmware in between.
1. Use Odin stand alone to flash just the I777 secondary bootloader.
2. Use Odin stand alone to flash just the param.lfs.
Try the instructions in this post.
Click to expand...
Click to collapse
No it isn't anymore. My upgrade isn't until May. Do you think a usb jig will work?
Thanks I will try that and will let you know how it comes along.
selw0nk said:
Do you think a usb jig will work?
Click to expand...
Click to collapse
You can already get into download mode. I don't believe there is any difference in the download mode produced by a jig. A jig is really helpful if the wrong secondary bootloader was flashed by accident (or ignorance), and you can't get the phone into download mode any ohter way.
selw0nk said:
No it isn't anymore. My upgrade isn't until May. Do you think a usb jig will work?
Thanks I will try that and will let you know how it comes along.
Click to expand...
Click to collapse
Tried those these you mentioned and still stuck. I'm already losing hope and want to get a new phone or spare already. I think I have a few things saved in the phone too.
Update: My screen is stuck at the Samsung Galaxy S2 screen with the yellow triangle.
Same problem
selw0nk said:
Tried those these you mentioned and still stuck. I'm already losing hope and want to get a new phone or spare already. I think I have a few things saved in the phone too.
Update: My screen is stuck at the Samsung Galaxy S2 screen with the yellow triangle.
Click to expand...
Click to collapse
I am having the exact same problem and my update isn't until May too!! Is this a common hardware failure?
kunalm123 said:
I am having the exact same problem and my update isn't until May too!! Is this a common hardware failure?
Click to expand...
Click to collapse
What rom were you on if I may ask? I'm not sure, but I'm about ready to give on trying everything. I started using my old Nokia phone and have to manually add my contacts lol. Sad panda
selw0nk said:
What rom were you on if I may ask? I'm not sure, but I'm about ready to give on trying everything. I started using my old Nokia phone and have to manually add my contacts lol. Sad panda
Click to expand...
Click to collapse
I was using a stock unrooted SGS2. It just stop working out of the blue..back to nokia it is
So I think I am going to send my phone to Mobile Tech Videos and hope they can unbrick it. http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-at-t-jtag-brick-repair/
selw0nk said:
So I think I am going to send my phone to Mobile Tech Videos and hope they can unbrick it. http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-at-t-jtag-brick-repair/
Click to expand...
Click to collapse
I think I have a similar issue on my phone (stalls in odin, I haven't flashed any PIT files yet), were they able to unbrick it?
Same issue here, The phone's stuck on Nand flash in Odin. Had tried all recommendations suggested here... Any updates on the phone sent to mobiletech guys?

[Q] Help me I bricked my SGH-i717R

Hi I tried to root my phone using this method ( http://forum.xda-developers.com/showthread.php?t=1504218 ) and it left my phone stuck on the reboot. I then tried to flash the stock kernel via odin, and when that didn't work I flashed cwm via odin and then a rogers kernel through cwm and it is still stuck on the rogers logo.......?
could someone help me......?
AirForce 1 said:
Hi I tried to root my phone using this method ( http://forum.xda-developers.com/showthread.php?t=1504218 ) and it left my phone stuck on the reboot. I then tried to flash the stock kernel via odin, and when that didn't work I flashed cwm via odin and then a rogers kernel through cwm and it is still stuck on the rogers logo.......?
could someone help me......?
Click to expand...
Click to collapse
I see your post count and realize you cannot post in the development section yet. that should not however stop you from reading. maybe you have but you may not have read the whole thread. i know that may seem like a daunting task, it is for me. so what I o is go to the most recent post or last page and start reading backwards. that way I get the most up to date information even on an older thread as you are referring to.
if you did that you would have seen a post from AGOATTAMER.
http://rootgalaxynote.com/galaxy-note-i717-roms/how-to-root-att-galaxy-note-sgh-i717-icsgingerbreadeasiest-method/
this is also the method I used. believe me, if I can pull it off, anybody can.
more tips..............
make sure you have all the files you need
rehearse the process
I know it sounds crazy, but these phones aint cheap and if you mess it up, can be pretty screwed.
so what is more valuable???? your phone or acting crazy and talking to yourself for a few minutes.
if you can still get download mode, your good, no brick
good luck
You flashed an older incompatible kernel with a newer ROM, but I guess you know that now. Flash the stock ROM found here using odin.
http://www.hotfile.com/dl/213010140/75bf7e2/I717RUXMD1_I717RRWCMD1_RWC.zip.html
Go into recovery after install and do a factory reset. Then start over. Many have used the link that captemo has mentioned. There are newer versions of recovery than the one listed on that site but it will get you rooted. Look at this thread also. Since you are installing the stock ROM via odin you will not have to deal with the script mentioned here.
http://forum.xda-developers.com/showthread.php?t=2485336
Just flash twrp with Odin, don't reboot into android, not directly into recovery after the flash finishes...
In recovery wipe data/factory reset.
When you go to boot it'll see you're not rooted and ask if you want to.
The easiest method to root.
Edit: note to self
Self,
check links before posting to avoid repeating yourself
studacris said:
Edit: note to self
Self,
check links before posting to avoid repeating yourself
Click to expand...
Click to collapse
Good advice is always worth repeating.
Sent from my Big Ass Outlaw Phone.

Flash back to stock... Failure. Help!

I was trying to flash back my I605 Note 2. I'm coming from CM11. Downloaded original 4.1.2 firmware and ran through Odin. Everything passed and worked through Odin, but when the phone restarted it was flashing the Galaxy Note 2 screen....... Any ideas? About to sell the phone. Really need some help. Any comments would be appreciated. Thank you.
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-note-2/
Worst case scenario Jtag brick repair $50. I would try everything thing 1st. Try to Odin root66. Try Odin again, maybe with the vram, or vrall down load. Can you get into recovery? Or download mode?
madmuthertrucker said:
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-note-2/
Worst case scenario Jtag brick repair $50. I would try everything thing 1st. Try to Odin root66. Try Odin again, maybe with the vram, or vrall down load. Can you get into recovery? Or download mode?
Click to expand...
Click to collapse
download mode yes. recovery no.
khipps16 said:
download mode yes. recovery no.
Click to expand...
Click to collapse
I think I've had this problem before. I flashed the root66 4.1.2 file and it got stuck. From there I put it in download mode and flashed TWRP through Odin. Then I went into recovery and flashed a ROM and from there I got it to boot. Since you're selling it, I would say flash creanrom and then flash sophisticated 4.3 to give them a stock experience.
- Your phone fitting in my phone's screen is nothing new to me.
After NAND write, Odin fails..... Now what?
khipps16 said:
After NAND write, Odin fails..... Now what?
Click to expand...
Click to collapse
Haven't seen that one. I did some research and the things I found are pretty bad. I read theres a problem where your phone storages are set to R/O rather than R/W and its not allowing it to write anything. The last thing I found to fix it was a fix for the VZN GS3, but I'm gonna guess the same will for the the Note 2. I would suggest using the unrooted stock firmware since root is unimportant right now. You can get that somewhere in another thread because I don't have the link handy. Get that, and get the pit file and load that into Odin with your phone in download mode. Go ahead and make sure repartition is checked as well and give that a try. Using the pit file should reset the data tables (or something like that) to the proper R/W permissions. Hope everything works out for you!
EDIT- Here's the thread you can use to get the firmware and pit file. All the files you should need are in section 1b. I know I said not to use the root66 file, go ahead and try it first because the firmware files are huge. If root66 doesn't work, go for the one that says it'll return it to "out of the box conditions." From here, hopefully it'll boot. If you run into the endless boot issue from here, go back to the first post I posted and do that.
Another Edit - I'm an idiot. Forgot to paste the link. http://forum.xda-developers.com/showthread.php?t=2024207
- Your phone fitting in my phone's screen is nothing new to me.

Categories

Resources