Hi all.
Device: Galaxy Tab 7510 US, stock ICS, rooted with CWM 5.5.0.4 and SuperSU
If I do a factory reset via the settings menu, what will the result be?
Will I be back to like new, out of the box condition?
Thanks.
You'll need to flash the stock recovery also.
Beezer80 said:
You'll need to flash the stock recovery also.
Click to expand...
Click to collapse
If I don't flash stock recovery, does that mean I'd be back to like new, but would still
be rooted with CWM and SuperSU intact?
Another question: Am I correct that if I flash the stock ICS update on my rooted tab, it would
no longer be rooted?
Thanks.
Jacksmyname said:
If I don't flash stock recovery, does that mean I'd be back to like new, but would still
be rooted with CWM and SuperSU intact?
Another question: Am I correct that if I flash the stock ICS update on my rooted tab, it would
no longer be rooted?
Thanks.
Click to expand...
Click to collapse
yes u are correct if u update no root will be there on ur new updated rom
CHEERS
akarshfrevr said:
yes u are correct if u update no root will be there on ur new updated rom
CHEERS
Click to expand...
Click to collapse
Thank you,
Related
Look at my latest post for another question.
LexterAce said:
Can anybody tell me how to install CWM?? I am using Froyo 2.2.1(Firmware S5830DXKA9) rooted. It will be better if there is any detailed steps. Thanks.
Click to expand...
Click to collapse
Hey!
Go to HERE!
And how to go to recovery?
1)Shut down you phone.
2)Hold down POWER+HOME buttons together, until you screen blink once and then comes GALAXY ACE....(not just SAMSUNG logo). Now you can release the buttons.
Now you must see the RECOVERY menu. Use the steps, in that thread, what link I gave you.
ENJOY!
CHEERS!
I thought Froyo do not support ClockWorkMod 4.0.0.9 yet? Correct me if i'm wrong.
LexterAce said:
I thought Froyo do not support ClockWorkMod 4.0.0.9 yet? Correct me if i'm wrong.
Click to expand...
Click to collapse
Hey!
Jeah, my bad, LOL. Its not for FROYO!
CHEERS!
casiocas said:
Hey!
Jeah, my bad, LOL. Its not for FROYO!
CHEERS!
Click to expand...
Click to collapse
So is there no more way to flash CWM for Froyo??
LexterAce said:
So is there no more way to flash CWM for Froyo??
Click to expand...
Click to collapse
Hey!
Not yet.
CHEERS!
casiocas said:
Hey!
Not yet.
CHEERS!
Click to expand...
Click to collapse
wrong.. btw LexterAce, here u go, cwm v3.2.0.1 that works perfectly on froyo. im using this.
http://forum.xda-developers.com/showthread.php?t=1138436
an0nym0us_ said:
wrong.. btw LexterAce, here u go, cwm v3.2.0.1 that works perfectly on froyo. im using this.
http://forum.xda-developers.com/showthread.php?t=1138436
Click to expand...
Click to collapse
Hey!
Jep, you right. Not read about ODIN flash, whats for FROYO. Thx man, we learn always something new(like me right now).
CHEERS!
an0nym0us_ said:
wrong.. btw LexterAce, here u go, cwm v3.2.0.1 that works perfectly on froyo. im using this.
http://forum.xda-developers.com/showthread.php?t=1138436
Click to expand...
Click to collapse
Thanks bud. Another question sorry for being a newbie. Does all the cooper.ops file the same for all models and all firmwares? If not can you provide link for my version of cooper.ops?? Thanks again. And will it brick my phone if anything wrong happens?
LexterAce said:
Thanks bud. Another question sorry for being a newbie. Does all the cooper.ops file the same for all models and all firmwares? If not can you provide link for my version of cooper.ops?? Thanks again. And will it brick my phone if anything wrong happens?
Click to expand...
Click to collapse
cooper.ops is same for all
Thanks guys I manage to flash it. However I am unsure whether the CWM is flashed inside my phone or not.
Boot into recovery and you'll see
Hatshipuh said:
Boot into recovery and you'll see
Click to expand...
Click to collapse
Cool!! Thanks.
OK, my question is very noobish, but what are the andvantages and features of installing ClockworkMod?
Sent from my Samsung Galaxy Ace on CodeROM v1
guru2468 said:
OK, my question is very noobish, but what are the andvantages and features of installing ClockworkMod?
Sent from my Samsung Galaxy Ace on CodeROM v1
Click to expand...
Click to collapse
google is, and always will be ur friend
http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
Yes, you're right, I should have checked first
Sorry I have another question. Do I need to unlock my phone in order to flash into KPH? As you can see from my first post my firmware region is not from Europe and the custom rom I wanted to flash requires me to flash KPH first before flashing their rom. And also if im using CWM v4 in KPH, do i need to flash back into v3 before flashing back froyo since froyo still doesn't support CWMv4?
LexterAce said:
Sorry I have another question. Do I need to unlock my phone in order to flash into KPH? As you can see from my first post my firmware region is not from Europe and the custom rom I wanted to flash requires me to flash KPH first before flashing their rom. And also if im using CWM v4 in KPH, do i need to flash back into v3 before flashing back froyo since froyo still doesn't support CWMv4?
Click to expand...
Click to collapse
Hey!
You mean UNLOCK or ROOTING. I think you mean ROOTING? If yes, then you dont need to ROOT, before FLASHING to KPH(with ODIN).
If you FLASH custom ROM, they are all ROOTED already for now!
And for second question: you not need to FLASH CWM3. It will be removed automatically, if you FLASH to KPH with ODIN!
CHEERS!
casiocas said:
Hey!
You mean UNLOCK or ROOTING. I think you mean ROOTING? If yes, then you dont need to ROOT, before FLASHING to KPH(with ODIN).
If you FLASH custom ROM, they are all ROOTED already for now!
And for second question: you not need to FLASH CWM3. It will be removed automatically, if you FLASH to KPH with ODIN!
CHEERS!
Click to expand...
Click to collapse
I mean unlocking because I heard that some people said that one need to unlock his/her phone before he/she can flash firmware of other region's. Base on your first answer, do you mean that flashing firmware and custom rom do not need root? Because I think I need to root before Flashing custom rom.( Anyway I have already rooted my phone.)
LexterAce said:
I mean unlocking because I heard that some people said that one need to unlock his/her phone before he/she can flash firmware of other region's. Base on your first answer, do you mean that flashing firmware and custom rom do not need root? Because I think I need to root before Flashing custom rom.( Anyway I have already rooted my phone.)
Click to expand...
Click to collapse
Hey!
You not need to ROOT, if you FLASH new FIRMWARE with ODIN(ROOT after FLASHING, because you LOSE you ROOT, if you FLASHING). And custom ROM-s not need to ROOT, they all ROOTED for now!
cheers!
hi everbody
my question that i have galaxy 9100 with latest stock room 4.0.4 and i want use latest siyah kernel to avoid phone brick later if i want reset my phone later...i can use this kernel without root my phone? and wath about if a room update come later ?
thanks for you all
aboul7orouf said:
hi everbody
my question that i have galaxy 9100 with latest stock room 4.0.4 and i want use latest siyah kernel to avoid phone brick later if i want reset my phone later...i can use this kernel without root my phone? and wath about if a room update come later ?
thanks for you all
Click to expand...
Click to collapse
just flash Siyah kernel via Odin. You don't need root access to do that
Jokesy said:
just flash Siyah kernel via Odin. You don't need root access to do that
Click to expand...
Click to collapse
good but i found recovery version .. i can install it with factory recovery?
and this will no effect room update? i can update without any probleme? or reset?
aboul7orouf said:
good but i found recovery version .. i can install it with factory recovery?
and this will no effect room update? i can update without any probleme? or reset?
Click to expand...
Click to collapse
You need root access first before you can flash a kernel via recovery (factory recovery).
I'll advise you to just flash the kernel via Odin.
However, If you still want to use the recovery option I can post a link for you.
You can always flash updates via Odin. Much faster.
Jokesy said:
You need root access first before you can flash a kernel via recovery (factory recovery).
I'll advise you to just flash the kernel via Odin.
However, If you still want to use the recovery option I can post a link for you.
You can always flash updates via Odin. Much faster.
Click to expand...
Click to collapse
i will appreciate you .. ok post me a link for recovery root methode that compatible with siyah recovery version
thank you again for your hard work
aboul7orouf said:
i will appreciate you .. ok post me a link for recovery root methode that compatible with siyah recovery version
thank you again for your hard work
Click to expand...
Click to collapse
Visit this thread
I helped a guy solve similar issue.
All your questions would probably have been answered in that thread.
Good luck
how to root leaked xxlsj 4.1.2 for s2??
gdstheking said:
how to root leaked xxlsj 4.1.2 for s2??
Click to expand...
Click to collapse
Download and flash the 'Philz' Kernel to root ur phone on xxlsj 4.1.2
since its the only Custom kernel that supports the same
ur 1st TM by me enjoy
Sun90 said:
Download and flash the 'Philz' Kernel to root ur phone on xxlsj 4.1.2
since its the only Custom kernel that supports the same
ur 1st TM by me enjoy
Click to expand...
Click to collapse
what about "Siyah-s2-v4.1.5"???
i flashed using philz kernal but no supersu >>??
Why not make a 3rd thread about that......you might get lucky.
Just flash the philz kernel and then install supersu via cwm
Click thanks if I helped you
ankur.co.in said:
Just flash the philz kernel and then install supersu via cwm
Click thanks if I helped you
Click to expand...
Click to collapse
given give a download link for supersu for philz kernel
Youu will not get root access if you flashed it via odin, download cmw version of it and.flash
Sent from my GT-I9100 using xda premium
philz kernel
ankur.co.in said:
Just flash the philz kernel and then install supersu via cwm
Click thanks if I helped you
Click to expand...
Click to collapse
first of all i clicked thanks already. Hehe.
Could you please send me the link where i can download philz kernel for jb.
It would be a great help.
I have stocked jb leaked and i want to change to rainbox.
Ill click thanks again just guide me where can i download the file.
droid_s2 said:
first of all i clicked thanks already. Hehe.
Could you please send me the link where i can download philz kernel for jb.
It would be a great help.
I have stocked jb leaked and i want to change to rainbox.
Ill click thanks again just guide me where can i download the file.
Click to expand...
Click to collapse
Here is the link bro sorry for late reply btw thanks for your thanks
http://forum.xda-developers.com/showthread.php?t=2031042
hey all.. im a newbie looking for some help
i did root my sgs2 phone jb version with cwm and i have superuser app installed and i have verified that it is rooted.
however i download beats audio which jammed my music player ..
so i was wondering if i can flash the stock jb again via odin ??? and will my phone if flashing works make it unrooted again?
aboalghool said:
hey all.. im a newbie looking for some help
i did root my sgs2 phone jb version with cwm and i have superuser app installed and i have verified that it is rooted.
however i download beats audio which jammed my music player ..
so i was wondering if i can flash the stock jb again via odin ??? and will my phone if flashing works make it unrooted again?
Click to expand...
Click to collapse
Yeah after flashing the firmware via odin ur phone will be unrooted
That 'exynos exploit' by 'chaingire' can also be used to root XXLSJ in just one click, without any flashing etc.
Sent from my GT-I9100 using xda premium
Hi I hope someone on here can help me...
I recently flashed my girlfriends sgs2 (via odin pc) with the new XXLSJ jelly bean leak. Because its not 'officially' released we have to use Philz kernel, is that correct? I basically want completely stock and the update WITHOUT ROOT AND YELLOW TRIANGLE...
Is this possible?
I myself have the same phone and have custom rom based on this leak and Philz kernel, but for some reason have no triangle? ?
So, I want...
- Jelly Bean Stock rom
- No Root/Triangle.
Thanks. ..
Maybe I should have waited for the official release..
sent from the unknown
match_stick said:
Hi I hope someone on here can help me...
I recently flashed my girlfriends sgs2 (via odin pc) with the new XXLSJ jelly bean leak. Because its not 'officially' released we have to use Philz kernel, is that correct? I basically want completely stock and the update WITHOUT ROOT AND YELLOW TRIANGLE...
Is this possible?
I myself have the same phone and have custom rom based on this leak and Philz kernel, but for some reason have no triangle? ?
So, I want...
- Jelly Bean Stock rom
- No Root/Triangle.
Thanks. ..
Maybe I should have waited for the official release..
sent from the unknown
Click to expand...
Click to collapse
When u flashed that leaked firmware, ur phone was already in stock but with TW 5 unrooted condition.
Secondly, for that triangle problem....Use the 'triangle away' app from play store.
Also, if u want official update then for few weeks more :/
Sent from my GT-I9100 using xda premium
Cool. I've heard some stories of hardbrick when using that app... but will most likely wait for the official update
sent from the unknown
is flashing back to official ics/gb rom will remove Clockworkmod CWM?
and will your phone also be unrooted? all back to defaults settings?
please tell to some who knows
thanks
lilflix7 said:
is flashing back to official ics/gb rom will remove Clockworkmod CWM?
and will your phone also be unrooted? all back to defaults settings?
please tell to some who knows
thanks
Click to expand...
Click to collapse
Yes, flashing ftf "official" file ROM will remove CWM and new flashed ROM will has no root rights.
The same flashing with Sony PC Companion and SEUS.
ok thanks
lilflix7 said:
is flashing back to official ics/gb rom will remove Clockworkmod CWM?
Click to expand...
Click to collapse
Only if it's installed in the system, if you're bootloader is unlocked and you have a custom kernel with it, then no.
XperienceD said:
Only if it's installed in the system, if you're bootloader is unlocked and you have a custom kernel with it, then no.
Click to expand...
Click to collapse
so I should also flash the default kernel? is that possible and where can i get that?
then if i can flash to default kernel, so i can able to remove CWM after i also flash official tft roms?
and if i flash to official Rom will unlocked bootloader be locked again?
lilflix7 said:
so I should also flash the default kernel? is that possible to flash and where can i get it?
then if i can flash to default kernel, then flash after the official tft, will CWM remove now?
Click to expand...
Click to collapse
Flashing a stock ftf also flashes the stock kernel so yes it will be removed.
XperienceD said:
Flashing a stock ftf also flashes the stock kernel so yes it will be removed.
Click to expand...
Click to collapse
thanks but how about if my phone is unlocked bootloader then i flash official tft roms, will unlocked bootloader be locked again?
Your phone will return to stock as it just came out of the box if you flash the factory image via fast boot. Including kernel and recovery therefore, you will lose cwm. You can also lock up the boot loader again using toolkit.
Sent from my Galaxy Nexus using xda premium
thanks but what toolkit? I know some toolkit but i wanted to sure if toolkit u know is the same to mine
lilflix7 said:
thanks but what toolkit? I know some toolkit but i wanted to sure if toolkit u know is the same to mine
Click to expand...
Click to collapse
You can use this toolkit... Its the easiest
http://forum.xda-developers.com/showthread.php?t=1560613
yes
lilflix7 said:
is flashing back to official ics/gb rom will remove Clockworkmod CWM?
and will your phone also be unrooted? all back to defaults settings?
please tell to some who knows
thanks
Click to expand...
Click to collapse
yap
but u can always root again
im using a samsung gs2 and im already rooted ive read that i need to unroot and delete that cwm that ive downloaded lately..is there any way to do it?.. please help..
You need to unroot and revert to stock CWM inorder to do what? stock firmware upgrade?
WardenBerret said:
You need to unroot and revert to stock CWM inorder to do what? stock firmware upgrade?
Click to expand...
Click to collapse
im using ics and i wanna uodate it to official jb how can i revert it back bro?.
Hello,
Find your JB firmware from sammobile.com and flash it via Odin.
But don't forget to make a full wipe, before flashing anything.
WardenBerret said:
Hello,
Find your JB firmware from sammobile.com and flash it via Odin.
But don't forget to make a full wipe, before flashing anything.
Click to expand...
Click to collapse
no need to remove cwm and unroot?..
lalayea said:
no need to remove cwm and unroot?..
Click to expand...
Click to collapse
Nope. Automatic unroot if flashing a stock firmware
WardenBerret said:
Nope. Automatic unroot if flashing a stock firmware
Click to expand...
Click to collapse
so i dont need to unroot it?..just wipe everything?..
He already answered your question:-
You - 'no need to remove cwm and unroot?..'
WB - 'Nope. Automatic unroot if flashing a stock firmware'