Related
Been trying to find the most recent Stock Rom for the Galaxy tab 10.1.
Had rooted mine and tried a few Custom ROMS which three kept rebooting and the 4th one by TASK (latest one) was great then kept slowing down to the point apps just crash. Did a restore to my backup that I did right after applying root, and didnt keep any of the original stock roms apps like task manager and weather widget.
Not thrilled about how when you save a ROM it doesnt save the apps too, or at least when you put another ROM on it removes the other apps. Either way.
Looking for the download for Stock Rom.
*Note, I will root the Tab again, is there a way to install stock ROM and still keep root so I dont have to do it all over again?
There are LOADS of stock roms, my friend. Take a look over the forum.
Or samfirmware.com
Can hardly help you more since you provide no info at all on what model you have;
7500, 7510.. wifi or 3G.. country.. languages you need...
Okay... So can anyone else provide me a link for a wifi only version, forum perusing in this massive site will be a huge pain.
realism51 said:
Okay... So can anyone else provide me a link for a wifi only version, forum perusing in this massive site will be a huge pain.
Click to expand...
Click to collapse
Read through the UNROOTING PROCESS section
http://forum.xda-developers.com/showthread.php?t=1474971
Hello everyone, I'm trying to do a buddy of mine a favor by upgrading his Vibrant to something a lot better (he's on stock) but I'm a bit unclear on a few things. First of all let me get out of the way that I'm a Fascinate (Verizon) owner that recently modded my own phone to run AOKP ICS Milestone 6 with great results, so I figured since he pretty much had the exact same phone I could do it for him. The problem I'm running into is the procedure I used to flash my phone doesn't seem to apply to the Vibrant (or at least what I was searching for) so I just wanted to clear up a few steps before I try to flash his phone.
He's not a very tech savvy guy, so he won't be updating ROMs on the bleeding edge or anything, he just wants his phone to run better so I figure ICZen is the way to go right, considering it's based off of what I'm using now (AOKP M6)? Everything needs to work, so that pretty much rules out any JB right now because of the GPS issues. Okay now onto the specific flashing questions:
1) This thread seems to be the go to thread for flashing the Vibrant, but it hasn't been updated since Dec '11, so would I just follow the same procedure for the newer ICS roms?
2) Here is the guide I used for my Fascinate (see section 4), which has a few extra steps that I notice are lacking for the Vibrant... namely installing cwm4 fixed for cm7 first, then installing THS Build 2, then flash over that with whatever ICS Rom you need.
3) Devil Kernel is what's considered best on my phone running AOKP M6... is that true as well for ICZen?
4) Since the Vibrant never got 2.3, what is the best modem to be using? On the Fascinate the EH03 (GB) stock modem is best, but I'm unsure what the deal is for the Vibrant since they never got an official GB update. Also along the same topic, Verizon has a code you can input that updates your PRL and improves reception... does T-Mobile have such a code or not?
I appreciate any and all input, as I want this to go as smoothly as possible. Thanks
You seem to have a pretty good grasp on what your doing.
From stock, install gingerbread bootloaders then go to recovery via volume rocker down and hold power button, until the logo. Might have to practice it a couple times.
Once in recovery click reinstall packages, might have to do it s couple of times. This installs your update.zip
From here I always perform wipes and flash a custom Froyo ROM. Maybe overkill but, only takes a second and I don't mind.
From here I flashed the latest CM9 nightly and on to Helly Bean.
Do your wipes in between flashes, and you should be fine.
I haven't ever heard about a T-Mobile code for tower updates, I think its automatic.
Well I didn't have to worry about bootloaders on my Fascinate since I was already on GB, so that's a bit new to me... but doing a quick google search I found this guide. Is that an accurate guide to follow? Alright so basically what you're saying is before I root at all I need to do this?
Also like I was saying earlier, he wants everything to work so I think Helly Bean is out of the question because of GPS, right? I was thinking ICZen looks the cleanest, with everything working nicely, and it's based on what I'm currently using on mine.
Can you clarify on why you're flashing a custom froyo rom? I won't mind to do that either, if it has any benefit.
Also, I checked his phone last night and it's on stock 2.2, not 2.1 if that makes any sort of difference. Thanks again
First root and get cwm recovery then flash bootloaders. The vibe never got an official GB, so that's why boot loaders are recommended. The guide you have is fine. Second the GPS on the vibrant has been notoriously hit or miss. I have a captivate, the GPS works great but my vibe couldn't get a lock to save my life.
Now as far as iczen or hellybean, you have to weigh the options:
Iczen is a great ROM and might have a better chance getting a GPS lock. IMO if you can get a lock with ICS you will probably get a lock with JB. But with ICS you have to be concerned with the EU bug. What's that you ask:
There has been an issue with people randomly looking at phone and a message saying encryption unsuccessful press to reset. If you press the button you have basically just locked up your internal SD card. If you don't press you MIGHT be able to recover it. There is a workaround if this happens, to use ext SD only but your friend will not like that.
I'm currently running hellybean on both of my devices and I love it. Like I said, cappy gps works great and my vibrant not so much. If you really want stable go with bionix as toast recommended or one of moped Ryder's ROMs . If you want to be wowed, go with hellybean.
There are some things you can try with it to get a GPS lock. The general consensus is turn on GPS, reboot, wait it out till you get an initial lock. After that locks will be quicker. I hope this helped in some way, if so hit thanks. As far as the guides etc you are good to go.
its peanut butter jelly(bean) time
That did help quite a bit, thank you. I have never even heard of that bug, do you know if that's Vibrant specific or can that happen on any of the others? I have been wanting to try Helly Bean on my Fascinate, but unfortunately my sdcard isn't very stable and I don't trust to flash anything until I can buy a new one. Honestly, I don't even think he cares much about the GPS, my original point was more along the lines of that I wanted to give him as much of a glitch-free experience as possible, so my fault for not being more specific. If Helly Bean is as stable as you're saying, then maybe I'll just do that instead then, especially after you explained that glitch. Also, since I don't have any Helly Bean experience myself, does it offer as much customization as AOKP? I've grown quite fond of all the little tweaks they include
Hellybean is pretty stable. When I did my vibrant I didn't have to use a boot loader I went straight to ICS then jellybean. If you want ICS then you may want to try aokp for his vibe its nice. If you end up trying aokp milestone 6 and have unknown baseband let me know and I'll link you to a linario build that should fix that
Sent from my SGH-T959 using xda app-developers app
I have a complete guide to install ICS ROMs in my signature if you feel so inclined. PM me if you need any of the files or I may just host them on my Dev-Host account. I'll be out most of the day, but I can upload them later on tonight.
When I need to go back to stock and root and flash cwm I use the AIO toolbox. I just put the rom on the internal flash and then use AIO to get cwm on it from the flash custom rom option. Then cancel the file and the phone will reboot into recovery where you install packages twice and should end up in cwm.
The EU bug has hit vibrant and captivates that I know of. It seems rare though, if you think about the number of users compared to the reported number of cases of the EU bug, its a small percentage.Hellybean doesn't have nearly as much customization but it does offer theming and some launcher/lock screen tweaks. You could always use a custom launcher. There are a few other jellybean ROMs you could try. Honestly any way you go will be better than stock!
*I forgot to tell you, you will need to Odin back to stock 2.1!
its peanut butter jelly(bean) time
Yeah.. I don't think root is actually necessary to do any of this. You'll be rooted when the process is complete however. The custom ROMs come with root access.
But to elaborate on Samsgun357's last post, if you are currently on Froyo 2.2 stock, you'll need to Odin back to stock 2.1 prior to starting, because Samsung fixed the bug that allows installation of custom recovery when they released 2.2
It's simple to do, search the forums and you'll find a guide on Odining back to JFD. That's stock Eclair. If I have time in a few I'll locate it for you and post it.
There are YouTube videos about it with links to the files as well. I think djeddie1west posted a good one with links to all files needed, if they are still working links.
Edit: http://forum.xda-developers.com/showthread.php?t=1117990
There's the link for installing GB bootloader.
Also, I am on my phone and haven't tested links, but as long as they work, near the bottom of the post you'll find the files needed to Odin the JFD files.
Eh, I just gave up and told him to go get an iPhone instead, to increase his hipster status.
Or... that's right, I'd rather be dead than own one of those ugly bricks.
You have all been extremely helpful, and I think I have more than enough to go on. I think for now I'll just throw ICZen on his phone since it's based on the rom I'm most familiar with... and when I have more experience with Helly Bean (I finally ordered a new sdcard that's on the way, so I can play with it on my own phone soon enough :good I'll just flash his again. He'll be okay with the risks mentioned so far in this post, and honestly his upgrade is coming up soon so I'm sure I'll be drooling over his S3 when that time comes.
@Woodrube That guide you made to install ICS was exactly what I was looking for, and I wish I had found it earlier so thank you for making such an excellent post.
I'll post back here with the results, thanks for all the help once again
Hello there!
I'm a complete noob when it comes to rooting and other related stuff so I could use some help. I want to install Cyanogenmod 10 (or 10.1 if it actually is usable and mostly stable / it is easier or more noobproof to install) for the first time and I would like to know what do I need to know before starting to follow any tutorials for flashing new kernels etc. There are just so so many tutorials for this and I don't know which one I should follow to not brick my phone as I just can't afford a new phone if I manage to brick this one and I just want to get everything out of this phone.
All this Clockworkmod, Odin, Rooting and everything just confuses me and I don't know where to start. If I've understood correct the first thing I should do is I should download some custom kernel as this is something which runs "under" the Android (kind of like bios for computers?) and allows me superuser access=rooting? Then after I got new rooted kernel done I should install Odin or ClockworkMod which acts like a "backup" if something goes wrong? And lastly I should flash in the Cyanogenmod 10 or 10.1 depending which is more hassle-free for everyday use (I'd like to get as much customization as possible for my phone) and has more features and more stable.
My phone model is GT-I9100 so it's the international one (I live in Finland so no Verizon or other model of it.. that much I understand at least) and my Android version is 4.0.4 the 100% stock version of it.
I'm tired of waiting for the slow Samsung people in Finland to get the official Jelly Bean release to be done and I want all that project butter goodness NOOOOOOW. So...
TLR: I have Samsung Galaxy S2 (GT-I9100).I want to get CM 10 or CM.10.1 the noobproofest way possible, can't afford to brick. Can you guide me to a good tutorial with easy to follow orders and up-to-date versions of Cyanogenmod as I don't want CM7, but the latest GOOD Jelly Bean version or just tell me how to do this? I will answer any questions you might have about my phone or anything. I'm not stupid when it comes to computers, but phones are totally new thing to me and I don't want to flash new jelly bean with some random tutorials from youtube as I'm afraid of getting a bricked phone (or missing out some great features from other Jelly Bean releases). I want the best for everyday use, most stable and the one with most customization options version of CyanogenMod Jelly Bean for my S2.
Thanks in advance! I will be monitoring this thread actively so I answer possible questions quick.
I think you're a bit confused at some points.. I assume you're on ICS now. First you have to root your phone by flashing a custom kernel (which gaines you root access) like Siyah WITH Odin. Steps are descriped in enough guides on xda.
When you've rooted your phone, it's best to make a Nandroid back up in Recovery Mode (CWM), you get CWM automatically with flashing Siyah, just in case anything goes wrong.
After this you may choose to flash a custom rom, mostly done with CWM recovery. Steps for this part are almost always written at the instructions on the first post of a rom thread, so read them carefully.
About Project Butter: this isn't fully implemented in CM, so flash the JB-leak from Samsung, or a rom based on it (or wait for the official release).
Sent from the Matrix
Donnie Sins said:
I think you're a bit confused at some points.. I assume you're on ICS now. First you have to root your phone by flashing a custom kernel (which gaines you root access) like Siyah WITH Odin. Steps are descriped in enough guides on xda.
When you've rooted your phone, it's best to make a Nandroid back up in Recovery Mode (CWM), you get CWM automatically with flashing Siyah, just in case anything goes wrong.
After this you may choose to flash a custom rom, mostly done with CWM recovery. Steps for this part are almost always written at the instructions on the first post of a rom thread, so read them carefully.
About Project Butter: this isn't fully implemented in CM, so flash the JB-leak from Samsung, or a rom based on it (or wait for the official release).
Sent from the Matrix
Click to expand...
Click to collapse
Yes I'm running 4.0.4 forgot to add that sorry. That clears many things up thank you! Oh... I thought that Project Butter was fully implemented on every 4.1.X ROM. Now I'm having hard time deciding if I should flash CM10 or just wait for the official Jelly Bean release which is supposed to come next month in Finland... I just want my phone to be really, really fluid and I'm not really pleased with this current 4.0.4 and all these unneeded programs like all the Samsung Hub programs.
hi everyone !
I'm a noob here, at XDA
I'm in a trouble, please help me to get out of this =(
but before posting my real problem (may be I will resolve it my self after getting the answer), I want to know:
how can I select the correct ROM for my HTC Amaze 4G ?
actually my phone has no firmware right now, I wipe / format all, accidentally without any backup.
now I have no idea about ROM. There are many:
http://forum.xda-developers.com/wiki/HTC_Amaze_4G/ROMs
[email protected] said:
hi everyone !
I'm a noob here, at XDA
I'm in a trouble, please help me to get out of this =(
but before posting my real problem (may be I will resolve it my self after getting the answer), I want to know:
how can I select the correct ROM for my HTC Amaze 4G ?
actually my phone has no firmware right now, I wipe / format all, accidentally without any backup.
now I have no idea about ROM. There are many:
http://forum.xda-developers.com/wiki/HTC_Amaze_4G/ROMs
Click to expand...
Click to collapse
The Wiki article is a good place to start, however, it isn't up to date. Select any of the stock ICS based ROMs if you want full functionality as these are the only ROMs where everything works correctly. There are many ICS ROMs both themed and stock Sense available. If you can live without WiFi tethering and some Bluetooth functionality there are several JB based AOSP based ROMs that are otherwise stable and work well. So far all of the KitKat builds have camera exposure issues in addition to the same problems as the JB ROMs. They are more in flux and under heavy development.
It's against the rules of the board to recommend a specific ROM, so you'll have to try for yourself to see what fits your needs and tastes.
However before proceeding you should look over the various threads that are pinned to the top of the different forums. There you will find tons of useful information that will save you trouble later. Remember that if you're coming from any ROM before ICS that you need to first flash a stock ICS factory image so you can install the proper radio baseband otherwise it won't work. None of the after-market ROMs have radios in them. Once an ICS ROM has been flashed you can install other ROMs since all of the later ones use ICS radio basebands.
Edit: One more thing that will help guide you in making your decision. Look at the Dev threads for the ROMs that you're interested in. Usually somewhere in the first or second post the author of the ROM will list the known bugs and issues associated with their ROM, and in the case of ROMs undergoing heavy development they will also list what they know is working well.
Good luck and welcome to the board
Odysseus1962 said:
The Wiki article is a good place to start, however, it isn't up to date. Select any of the stock ICS based ROMs if you want full functionality as these are the only ROMs where everything works correctly. There are many ICS ROMs both themed and stock Sense available. If you can live without WiFi tethering and some Bluetooth functionality there are several JB based AOSP based ROMs that are otherwise stable and work well. So far all of the KitKat builds have camera exposure issues in addition to the same problems as the JB ROMs. They are more in flux and under heavy development.
It's against the rules of the board to recommend a specific ROM, so you'll have to try for yourself to see what fits your needs and tastes.
However before proceeding you should look over the various threads that are pinned to the top of the different forums. There you will find tons of useful information that will save you trouble later. Remember that if you're coming from any ROM before ICS that you need to first flash a stock ICS factory image so you can install the proper radio baseband otherwise it won't work. None of the after-market ROMs have radios in them. Once an ICS ROM has been flashed you can install other ROMs since all of the later ones use ICS radio basebands.
Good luck and welcome to the board.
Click to expand...
Click to collapse
Thank You very much
here is the abstract of what I understand:
I can select any of the stock ICS based ROMs
I'm coming from a ROM before ICS (it was GB) so I need to first flash a stock ICS factory image
Then I will be able to install the proper radio baseband
Once ICS ROM has been flashed I can install other ROMs
Now the new questions are popping up (respectively)
there are many vendors before selecting an ICS stock ROM (Mobilicity, Telus, T-Mobile etc.)
is it safe to select any of them ? (without knowing your phone's vendor)
what is 'stock ICS factory image' ? Can you please mention a link to download it or a guide to flash
what is 'proper' radio baseband ? (mine was 1.13.550L.13DC_30.69b.550L.101D)
How can I change / update to a proper baseband ? Can you please mention a link here too, (if necessary)
Thank You in Advance
[email protected] said:
Thank You very much
here is the abstract of what I understand:
I can select any of the stock ICS based ROMs
I'm coming from a ROM before ICS (it was GB) so I need to first flash a stock ICS factory image
Then I will be able to install the proper radio baseband
Once ICS ROM has been flashed I can install other ROMs
Now the new questions are popping up (respectively)
there are many vendors before selecting an ICS stock ROM (Mobilicity, Telus, T-Mobile etc.)
is it safe to select any of them ? (without knowing your phone's vendor)
what is 'stock ICS factory image' ? Can you please mention a link to download it or a guide to flash
what is 'proper' radio baseband ? (mine was 1.13.550L.13DC_30.69b.550L.101D)
How can I change / update to a proper baseband ? Can you please mention a link here too, (if necessary)
Thank You in Advance
Click to expand...
Click to collapse
Since you're coming from Gingerbread I assume you have an Asian or unbranded Amaze. You need to follow the directions for those models. It requires you to attain s-off prior to flashing an ICS ROM. There are posts explaining the hack you need to do to get s-off. Once s-off you next need to superCID. Once both s-off and superCID have been attained you can flash an ICS ROM. You need to go through this procedure because the stock ROMs have carrier identification codes (CID) which prevent ROMs from one carrier running on another carrier's device. These hacks get around it.
At this point most folks flash the T-Mobile ICS ROM since it's fairly recent and the basis for most of the ICS modified ROMs. Once you've got an ICS radio installed you can then flash any ROM you'd like.
Again read through the pinned threads and familiarize yourself with the procedure. Failure to follow the directions correctly can result in a bricked phone. Then your next post will be in the Amaze unbricking project thread asking for desperate help.
I'm s-on. I didn't need s-off since I'm a T-Mobile customer and already had ICS before I started flashing ROMs. So I'm not going to be much help with the s-off procedure. Like I said, read through the appropriate threads and familiarize yourself on the procedure so you can move forward. For now, until you get s-off it's best to flash back to whatever stock ROM you had because there isn't much you can do until you get s-off and I'm sure you still want to have use of your handset.
I hope this helps.
Good luck
I followed this method, yesterday and got my phone back (as it was before)
aj_2423 said:
If you have already made the mistake of unlocking and trying to flash an ICS rom while still on GB, you can do the following to get back to GB and have a working device.
ATTENTION - Before continuing past this point, You must first have 4ext installed as your recovery if the device is S-Off.(you can use hasoons AIO toolkit to do this.) Once you have 4ext flashed, boot into recovery and in the settings Enable Smartflash
1) Download this ruby_unsigned_021812_031444.zip GB rom
2) Next, Place the the downloaded file on your sd card.
3) Now Boot into 4ext recovery (battery pull, then start phone while holding down the power+VolumeDown buttons simultaneously).
4) Once in recovery, go to the Wipe/Format section and select "Format all partitions except SDcard"
5) Finally, after formating completes, verify that you have SmartFlash enabled & then flash the Rom you just downloaded from above..
Once this is complete, you should once again have a working device.
Please use this thread for any related questions/comments you may have so we can try and keep the forums a little more organized and clean. THANK YOU
*********************&*******************
Hopefully this will help reduce the duplicate threads
Click to expand...
Click to collapse
[email protected] said:
I followed this method, yesterday and got my phone back (as it was before)
Click to expand...
Click to collapse
Looks like @Odysseus1962 has things under control here, but I'll still add my two cents, if he doesn't mind
I read through this post and I must say, I'm glad that you got your phone working again, even though it's only GB still.
Having said that I could safely assume that you have rooted your phone and installed 4ext recovery, and I'm hoping that you've performed S-OFF and SuperCID your device.
If you have done that, then I highly recommend you to the T-Mobile stock RUU before you even attempt any custom roms. Personally, I enjoyed the T-Mobile stock experience (well, I debloated it myself using Titanium Backup, removing a lot of the useless T-Mobile stuff ie; T-mobile voicemail, assist, 411 etc)
I actually used that rom for a while. Battery life was nice, the rom itself was really well done, as expected.
But this is all up to you, many of the custom roms here have so much more features than the T-Mobile, with a much smoother experience too.
But like Odysseus said, there are some flaws with the roms. Some have WiFi tether issues, bluetooth, in call volume and codec issues.
It's really a personal decision where you can settle after experiencing the roms first hand. Everybody uses their device differently, so you'll have to test the roms to find which one suits your needs and standards.
Darin_Ram said:
Looks like @Odysseus1962 has things under control here, but I'll still add my two cents, if he doesn't mind
I read through this post and I must say, I'm glad that you got your phone working again, even though it's only GB still.
Having said that I could safely assume that you have rooted your phone and installed 4ext recovery, and I'm hoping that you've performed S-OFF and SuperCID your device.
If you have done that, then I highly recommend you to the T-Mobile stock RUU before you even attempt any custom roms. Personally, I enjoyed the T-Mobile stock experience (well, I debloated it myself using Titanium Backup, removing a lot of the useless T-Mobile stuff ie; T-mobile voicemail, assist, 411 etc)
I actually used that rom for a while. Battery life was nice, the rom itself was really well done, as expected.
But this is all up to you, many of the custom roms here have so much more features than the T-Mobile, with a much smoother experience too.
But like Odysseus said, there are some flaws with the roms. Some have WiFi tether issues, bluetooth, in call volume and codec issues.
It's really a personal decision where you can settle after experiencing the roms first hand. Everybody uses their device differently, so you'll have to test the roms to find which one suits your needs and standards.
Click to expand...
Click to collapse
Thank You @Odysseus1962 and @Darin_Ram
1. I followed @aj_2423
Thread : [GUIDE][GBtoICS]FOR INTERNATIONAL/ASIAN VERSION/UNBRANDED Amaze Owners-Read1st
2. 2nd Post of this Thread helped me to get back my phone in working state.
3. but as you know, this was not my aim. I had done this just to make sure that my phone is alive
4. to upgrade from GB to ICS, I carefully read and followed the 1st Post of same thread and last night I was successful to do so
Now I have perfectly working HTC Amaze 4G with ICS :victory:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Just to share my experience :
i - the 'Wire Trick' was the most annoying thing, I tried several times to do it accurate.
ii - Step 3 of this process was to 'Unlock bootloader', I had done that. But after S-OFF, during the next steps, I noticed that bootloader is LOCKED again. I don't know if it's normal. Anyhow it didn't cause any problem for me.
Happy Ending :highfive:
[email protected] said:
Thank You @Odysseus1962 and @Darin_Ram
1. I followed @aj_2423
Thread : [GUIDE][GBtoICS]FOR INTERNATIONAL/ASIAN VERSION/UNBRANDED Amaze Owners-Read1st
2. 2nd Post of this Thread helped me to get back my phone in working state.
3. but as you know, this was not my aim. I had done this just to make sure that my phone is alive
4. to upgrade from GB to ICS, I carefully read and followed the 1st Post of same thread and last night I was successful to do so
Now I have perfectly working HTC Amaze 4G with ICS :victory:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Just to share my experience :
i - the 'Wire Trick' was the most annoying thing, I tried several times to do it accurate.
ii - Step 3 of this process was to 'Unlock bootloader', I had done that. But after S-OFF, during the next steps, I noticed that bootloader is LOCKED again. I don't know if it's normal. Anyhow it didn't cause any problem for me.
Happy Ending :highfive:
Click to expand...
Click to collapse
Lol Glad to hear that your phone is up and running with ICS :highfive:
About your concerns.. I'm surprise the wire trick gave you some trouble. I don't know about anybody else but I'm assuming it was sort of easy since I got it on my second try.
And yes, the bootloader re-locks itself after you flash the ICS T-Mobile RUU. That's why you're supposed to keep the code saved in a notepad file on your computer
Please excuse my lack of knowledge. I would like to know if I can up grade my 10.1 tab GT-7510 running 4.04 to a higher Androind operating system.
ricmck said:
Please excuse my lack of knowledge. I would like to know if I can up grade my 10.1 tab GT-7510 running 4.04 to a higher Androind operating system.
Click to expand...
Click to collapse
Sure you can! ☺
You can run almost any version you want. I'm running kitkat 4.4.4 (the very latest version) on it now.
But you'll have to root it first and perhaps change the bootloader (I did) and install a custom recovery. After all this you can flash almost any ROM you want.
Have fun and Always make a backup!
Sent from my GT-P7510 running KK 4.4.4 nameless
OK Great, can you point me to where to get the instructions to do the rooting, change the bootloader, install the custom recovery and then the 4.44 upgrade?
I am asking about the rooting because I have see many different suggestions. It there a thread that describes each one of these processes?
Thanks
Rick McK
Olivier V said:
Sure you can! ☺
You can run almost any version you want. I'm running kitkat 4.4.4 (the very latest version) on it now.
But you'll have to root it first and perhaps change the bootloader (I did) and install a custom recovery. After all this you can flash almost any ROM you want.
Have fun and Always make a backup!
Sent from my GT-P7510 running KK 4.4.4 nameless
Click to expand...
Click to collapse
ricmck said:
OK Great, can you point me to where to get the instructions to do the rooting, change the bootloader, install the custom recovery and then the 4.44 upgrade?
I am asking about the rooting because I have see many different suggestions. It there a thread that describes each one of these processes?
Thanks
Rick McK
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2029664
Guide for rooting GT-P7510 with Stock 4.0.4 ROM
This is the classic way with all the steps explained.
Sent from my Nexus 7 2013
Getting your tablet 'upgraded'
ricmck said:
OK Great, can you point me to where to get the instructions to do the rooting, change the bootloader, install the custom recovery and then the 4.44 upgrade?
I am asking about the rooting because I have see many different suggestions. It there a thread that describes each one of these processes?
Thanks
Rick McK
Click to expand...
Click to collapse
It is ever so simple to upgrade your tablet to CM10.1, look at http://wiki.cyanogenmod.org/w/Install_CM_for_p4wifi (I assume it is a P7510 Samsung Galaxy Tab 10.1 WiFi version) to get the quick and easy method of getting Android 4.2.2 on your tablet from a very stable and reliable Custom ROM, superuser and more built-in by default. If ever it does not work for you, then you can always revert to Stock 4.0.4 from Samsung (see sammobile.com for downloads of stock recovery images. You will need to register for free to be able to download).
Hope this is the quick and easy way for you. If you want to go to KitKat 4.4.4, then the nameless (official nightly build) ROM at http://forum.xda-developers.com/showthread.php?t=2716016 is where you want to start out. Please keep in mind that this release may still have some issues for the Tab, as it still is under development.
Your choice. But no need to root beforehand if you want to load a custom ROM, you only need a recovery manager (either CWM or TWRP, all to personal taste) loaded to continue. Mostly, just to make sure, do the bootloader-thing beforehand as the default Samsung bootloader hates both CMW and TWRP recovery mode, and you could end up with the infamous rolling screen problem.
My suggestion is to start with CM10.1 as that is almost a walk in the park, and the steps are both easy to follow and [almost] never fail.
Hope this makes it a bit clearer. Best of luck in your endeavours to get the stock bloatware off your tablet...
THANK YOU for the complete instructions. this is GREAT. I have several final questions before I try it.
My Tab has Kernal# 3.1.10 [email protected] - 116#2 SMPT PREEMPT Tues Aug 7 19:16:14 KST 2012
Is this process still OK and valid?
I want to be sure I fully understand the process:
1: I install a new bootLoader. WHERE is the code-file, and what is the process?
2: Do the Odlin3 method- Windows (http://wiki.cyanogenmod.org/w/Install_CM_for_p4wifi)
3: I perform the next step: "Installing CyanogenMod from recovery"
4: where do I find the "required Google Apps" as noted in the above "step three".
5: HOW to find and install 4.2.2, or what ever is the most stable OS for this Tab.
Is this process correct? If no please clarify
Sorry for all the "dumb" basic questions. ;(
Thanks
Rick McK
Just_Another_N00b said:
It is ever so simple to upgrade your tablet to CM10.1, look at http://wiki.cyanogenmod.org/w/Install_CM_for_p4wifi (I assume it is a P7510 Samsung Galaxy Tab 10.1 WiFi version) to get the quick and easy method of getting Android 4.2.2 on your tablet from a very stable and reliable Custom ROM, superuser and more built-in by default. If ever it does not work for you, then you can always revert to Stock 4.0.4 from Samsung (see sammobile.com for downloads of stock recovery images. You will need to register for free to be able to download).
Hope this is the quick and easy way for you. If you want to go to KitKat 4.4.4, then the nameless (official nightly build) ROM at http://forum.xda-developers.com/showthread.php?t=2716016 is where you want to start out. Please keep in mind that this release may still have some issues for the Tab, as it still is under development.
Your choice. But no need to root beforehand if you want to load a custom ROM, you only need a recovery manager (either CWM or TWRP, all to personal taste) loaded to continue. Mostly, just to make sure, do the bootloader-thing beforehand as the default Samsung bootloader hates both CMW and TWRP recovery mode, and you could end up with the infamous rolling screen problem.
My suggestion is to start with CM10.1 as that is almost a walk in the park, and the steps are both easy to follow and [almost] never fail.
Hope this makes it a bit clearer. Best of luck in your endeavours to get the stock bloatware off your tablet...
Click to expand...
Click to collapse
ricmck said:
THANK YOU for the complete instructions. this is GREAT. I have several final questions before I try it.
My Tab has Kernal# 3.1.10 [email protected] - 116#2 SMPT PREEMPT Tues Aug 7 19:16:14 KST 2012
Is this process still OK and valid?
I want to be sure I fully understand the process:
1: I install a new bootLoader. WHERE is the code-file, and what is the process?
2: Do the Odlin3 method- Windows (http://wiki.cyanogenmod.org/w/Install_CM_for_p4wifi)
3: I perform the next step: "Installing CyanogenMod from recovery"
4: where do I find the "required Google Apps" as noted in the above "step three".
5: HOW to find and install 4.2.2, or what ever is the most stable OS for this Tab.
Is this process correct? If no please clarify
Sorry for all the "dumb" basic questions. ;(
Thanks
Rick McK
Click to expand...
Click to collapse
The process is defined for the p4wifi (i.e. P7510 Samsung Galaxy Tab 10.1, the original Samsung WiFi only, not 3G).
If you have a tab2/tab3/note etc, then you need to navigate a bit there to find your machine. But most of the process is the same, just other binaries/ROM.
The bootloader download is mentioned in the Odin3 method (windows only) of this documentation, within step 1: download pershoots recovery package. Steps 2 to 8 there explain exactly how to start up odin, get your tablet into download mode and transfer the bootloader. Step 10 explains that your have to follow the same steps 2 to 8 to get the recovery tool installed on your tablet.
For the p4wifi the CM10.1 stable roms can be found at: http://download.cyanogenmod.org/?device=p4wifi
The applicable google apps can be downloaded from http://goo.im/gapps , where you have to load the one, related to the flavour. In your case the CM10.1, one (3rd line at this moment) of 20130812.
PLEASE NOTE: If your tablet is not the P7510 (Wifi), but, for example the P7500 (3G), then you might need a different bootloader, recovery mod and CM10.1
CM10.1 is 4.2.2, and has root built-in by default. This 4.2.2 also allows you to create more 'users' on the tablet, do all kinds of nice things, and can be finetuned to improve performance (like overclocking). All built-in by default.
Happy Hunting!
Hey, and don't apologise for asking dumb questions, we all started out asking questions, and this forum is really there to get people started on the path of getting the most out of their tablets. Keep on asking, and there is always somebody out there to help you out if you get stuck.
One advise: get the exact model-number of your tablet (build) and register at sammobile to get a plain stock recovery image, so you can always get back to the default setup, and not lose hope when your tablet gets 'bricked'. We have more than enough expensive doorstoppers in the world to need to add one more. Sammobile gives you the recovery image, base on model and country. These stock recovery images are about 450 MB, and can be restored easily with your big friend Odin (see http://forum.xda-developers.com/showthread.php?t=2142268).
THANK YOU VERY MUCH for clarifying my questions and process. In my prior life I was a process engineer (semiconductors, and hydrogen fuel cells). Thus I like clear instructions. I also see now some of the challenges the web and forums like this one present, because links go dead, and new process and data are constantly being created. Thus the "process" is always in flux.
I think I can now go and try this.
Thanks
Rick McK
Just_Another_N00b said:
The process is defined for the p4wifi (i.e. P7510 Samsung Galaxy Tab 10.1, the original Samsung WiFi only, not 3G).
If you have a tab2/tab3/note etc, then you need to navigate a bit there to find your machine. But most of the process is the same, just other binaries/ROM.
The bootloader download is mentioned in the Odin3 method (windows only) of this documentation, within step 1: download pershoots recovery package. Steps 2 to 8 there explain exactly how to start up odin, get your tablet into download mode and transfer the bootloader. Step 10 explains that your have to follow the same steps 2 to 8 to get the recovery tool installed on your tablet.
For the p4wifi the CM10.1 stable roms can be found at: http://download.cyanogenmod.org/?device=p4wifi
The applicable google apps can be downloaded from http://goo.im/gapps , where you have to load the one, related to the flavour. In your case the CM10.1, one (3rd line at this moment) of 20130812.
PLEASE NOTE: If your tablet is not the P7510 (Wifi), but, for example the P7500 (3G), then you might need a different bootloader, recovery mod and CM10.1
CM10.1 is 4.2.2, and has root built-in by default. This 4.2.2 also allows you to create more 'users' on the tablet, do all kinds of nice things, and can be finetuned to improve performance (like overclocking). All built-in by default.
Happy Hunting!
Hey, and don't apologise for asking dumb questions, we all started out asking questions, and this forum is really there to get people started on the path of getting the most out of their tablets. Keep on asking, and there is always somebody out there to help you out if you get stuck.
One advise: get the exact model-number of your tablet (build) and register at sammobile to get a plain stock recovery image, so you can always get back to the default setup, and not lose hope when your tablet gets 'bricked'. We have more than enough expensive doorstoppers in the world to need to add one more. Sammobile gives you the recovery image, base on model and country. These stock recovery images are about 450 MB, and can be restored easily with your big friend Odin (see http://forum.xda-developers.com/showthread.php?t=2142268).
Click to expand...
Click to collapse
ricmck said:
THANK YOU VERY MUCH for clarifying my questions and process. In my prior life I was a process engineer (semiconductors, and hydrogen fuel cells). Thus I like clear instructions. I also see now some of the challenges the web and forums like this one present, because links go dead, and new process and data are constantly being created. Thus the "process" is always in flux.
I think I can now go and try this.
Thanks
Rick McK
Click to expand...
Click to collapse
You are welcome. I myself have been a Software Engineer since the early seventies of the 20th century (40+ years of IT), and started out as Computer Operator loading punchcards and papertape into old IBM and UNIVAC computers. The world has changed dramatically since then. Not all good though...
Good luck, and always peruse XDA to get answers to your questions. Sometimes you have to trudge through a lot of mess, but the diamonds are there to find.And ask, ask, ask...