Please excuse my lack of knowledge. I would like to know if I can up grade my 10.1 tab GT-7510 running 4.04 to a higher Androind operating system.
ricmck said:
Please excuse my lack of knowledge. I would like to know if I can up grade my 10.1 tab GT-7510 running 4.04 to a higher Androind operating system.
Click to expand...
Click to collapse
Sure you can! ☺
You can run almost any version you want. I'm running kitkat 4.4.4 (the very latest version) on it now.
But you'll have to root it first and perhaps change the bootloader (I did) and install a custom recovery. After all this you can flash almost any ROM you want.
Have fun and Always make a backup!
Sent from my GT-P7510 running KK 4.4.4 nameless
OK Great, can you point me to where to get the instructions to do the rooting, change the bootloader, install the custom recovery and then the 4.44 upgrade?
I am asking about the rooting because I have see many different suggestions. It there a thread that describes each one of these processes?
Thanks
Rick McK
Olivier V said:
Sure you can! ☺
You can run almost any version you want. I'm running kitkat 4.4.4 (the very latest version) on it now.
But you'll have to root it first and perhaps change the bootloader (I did) and install a custom recovery. After all this you can flash almost any ROM you want.
Have fun and Always make a backup!
Sent from my GT-P7510 running KK 4.4.4 nameless
Click to expand...
Click to collapse
ricmck said:
OK Great, can you point me to where to get the instructions to do the rooting, change the bootloader, install the custom recovery and then the 4.44 upgrade?
I am asking about the rooting because I have see many different suggestions. It there a thread that describes each one of these processes?
Thanks
Rick McK
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2029664
Guide for rooting GT-P7510 with Stock 4.0.4 ROM
This is the classic way with all the steps explained.
Sent from my Nexus 7 2013
Getting your tablet 'upgraded'
ricmck said:
OK Great, can you point me to where to get the instructions to do the rooting, change the bootloader, install the custom recovery and then the 4.44 upgrade?
I am asking about the rooting because I have see many different suggestions. It there a thread that describes each one of these processes?
Thanks
Rick McK
Click to expand...
Click to collapse
It is ever so simple to upgrade your tablet to CM10.1, look at http://wiki.cyanogenmod.org/w/Install_CM_for_p4wifi (I assume it is a P7510 Samsung Galaxy Tab 10.1 WiFi version) to get the quick and easy method of getting Android 4.2.2 on your tablet from a very stable and reliable Custom ROM, superuser and more built-in by default. If ever it does not work for you, then you can always revert to Stock 4.0.4 from Samsung (see sammobile.com for downloads of stock recovery images. You will need to register for free to be able to download).
Hope this is the quick and easy way for you. If you want to go to KitKat 4.4.4, then the nameless (official nightly build) ROM at http://forum.xda-developers.com/showthread.php?t=2716016 is where you want to start out. Please keep in mind that this release may still have some issues for the Tab, as it still is under development.
Your choice. But no need to root beforehand if you want to load a custom ROM, you only need a recovery manager (either CWM or TWRP, all to personal taste) loaded to continue. Mostly, just to make sure, do the bootloader-thing beforehand as the default Samsung bootloader hates both CMW and TWRP recovery mode, and you could end up with the infamous rolling screen problem.
My suggestion is to start with CM10.1 as that is almost a walk in the park, and the steps are both easy to follow and [almost] never fail.
Hope this makes it a bit clearer. Best of luck in your endeavours to get the stock bloatware off your tablet...
THANK YOU for the complete instructions. this is GREAT. I have several final questions before I try it.
My Tab has Kernal# 3.1.10 [email protected] - 116#2 SMPT PREEMPT Tues Aug 7 19:16:14 KST 2012
Is this process still OK and valid?
I want to be sure I fully understand the process:
1: I install a new bootLoader. WHERE is the code-file, and what is the process?
2: Do the Odlin3 method- Windows (http://wiki.cyanogenmod.org/w/Install_CM_for_p4wifi)
3: I perform the next step: "Installing CyanogenMod from recovery"
4: where do I find the "required Google Apps" as noted in the above "step three".
5: HOW to find and install 4.2.2, or what ever is the most stable OS for this Tab.
Is this process correct? If no please clarify
Sorry for all the "dumb" basic questions. ;(
Thanks
Rick McK
Just_Another_N00b said:
It is ever so simple to upgrade your tablet to CM10.1, look at http://wiki.cyanogenmod.org/w/Install_CM_for_p4wifi (I assume it is a P7510 Samsung Galaxy Tab 10.1 WiFi version) to get the quick and easy method of getting Android 4.2.2 on your tablet from a very stable and reliable Custom ROM, superuser and more built-in by default. If ever it does not work for you, then you can always revert to Stock 4.0.4 from Samsung (see sammobile.com for downloads of stock recovery images. You will need to register for free to be able to download).
Hope this is the quick and easy way for you. If you want to go to KitKat 4.4.4, then the nameless (official nightly build) ROM at http://forum.xda-developers.com/showthread.php?t=2716016 is where you want to start out. Please keep in mind that this release may still have some issues for the Tab, as it still is under development.
Your choice. But no need to root beforehand if you want to load a custom ROM, you only need a recovery manager (either CWM or TWRP, all to personal taste) loaded to continue. Mostly, just to make sure, do the bootloader-thing beforehand as the default Samsung bootloader hates both CMW and TWRP recovery mode, and you could end up with the infamous rolling screen problem.
My suggestion is to start with CM10.1 as that is almost a walk in the park, and the steps are both easy to follow and [almost] never fail.
Hope this makes it a bit clearer. Best of luck in your endeavours to get the stock bloatware off your tablet...
Click to expand...
Click to collapse
ricmck said:
THANK YOU for the complete instructions. this is GREAT. I have several final questions before I try it.
My Tab has Kernal# 3.1.10 [email protected] - 116#2 SMPT PREEMPT Tues Aug 7 19:16:14 KST 2012
Is this process still OK and valid?
I want to be sure I fully understand the process:
1: I install a new bootLoader. WHERE is the code-file, and what is the process?
2: Do the Odlin3 method- Windows (http://wiki.cyanogenmod.org/w/Install_CM_for_p4wifi)
3: I perform the next step: "Installing CyanogenMod from recovery"
4: where do I find the "required Google Apps" as noted in the above "step three".
5: HOW to find and install 4.2.2, or what ever is the most stable OS for this Tab.
Is this process correct? If no please clarify
Sorry for all the "dumb" basic questions. ;(
Thanks
Rick McK
Click to expand...
Click to collapse
The process is defined for the p4wifi (i.e. P7510 Samsung Galaxy Tab 10.1, the original Samsung WiFi only, not 3G).
If you have a tab2/tab3/note etc, then you need to navigate a bit there to find your machine. But most of the process is the same, just other binaries/ROM.
The bootloader download is mentioned in the Odin3 method (windows only) of this documentation, within step 1: download pershoots recovery package. Steps 2 to 8 there explain exactly how to start up odin, get your tablet into download mode and transfer the bootloader. Step 10 explains that your have to follow the same steps 2 to 8 to get the recovery tool installed on your tablet.
For the p4wifi the CM10.1 stable roms can be found at: http://download.cyanogenmod.org/?device=p4wifi
The applicable google apps can be downloaded from http://goo.im/gapps , where you have to load the one, related to the flavour. In your case the CM10.1, one (3rd line at this moment) of 20130812.
PLEASE NOTE: If your tablet is not the P7510 (Wifi), but, for example the P7500 (3G), then you might need a different bootloader, recovery mod and CM10.1
CM10.1 is 4.2.2, and has root built-in by default. This 4.2.2 also allows you to create more 'users' on the tablet, do all kinds of nice things, and can be finetuned to improve performance (like overclocking). All built-in by default.
Happy Hunting!
Hey, and don't apologise for asking dumb questions, we all started out asking questions, and this forum is really there to get people started on the path of getting the most out of their tablets. Keep on asking, and there is always somebody out there to help you out if you get stuck.
One advise: get the exact model-number of your tablet (build) and register at sammobile to get a plain stock recovery image, so you can always get back to the default setup, and not lose hope when your tablet gets 'bricked'. We have more than enough expensive doorstoppers in the world to need to add one more. Sammobile gives you the recovery image, base on model and country. These stock recovery images are about 450 MB, and can be restored easily with your big friend Odin (see http://forum.xda-developers.com/showthread.php?t=2142268).
THANK YOU VERY MUCH for clarifying my questions and process. In my prior life I was a process engineer (semiconductors, and hydrogen fuel cells). Thus I like clear instructions. I also see now some of the challenges the web and forums like this one present, because links go dead, and new process and data are constantly being created. Thus the "process" is always in flux.
I think I can now go and try this.
Thanks
Rick McK
Just_Another_N00b said:
The process is defined for the p4wifi (i.e. P7510 Samsung Galaxy Tab 10.1, the original Samsung WiFi only, not 3G).
If you have a tab2/tab3/note etc, then you need to navigate a bit there to find your machine. But most of the process is the same, just other binaries/ROM.
The bootloader download is mentioned in the Odin3 method (windows only) of this documentation, within step 1: download pershoots recovery package. Steps 2 to 8 there explain exactly how to start up odin, get your tablet into download mode and transfer the bootloader. Step 10 explains that your have to follow the same steps 2 to 8 to get the recovery tool installed on your tablet.
For the p4wifi the CM10.1 stable roms can be found at: http://download.cyanogenmod.org/?device=p4wifi
The applicable google apps can be downloaded from http://goo.im/gapps , where you have to load the one, related to the flavour. In your case the CM10.1, one (3rd line at this moment) of 20130812.
PLEASE NOTE: If your tablet is not the P7510 (Wifi), but, for example the P7500 (3G), then you might need a different bootloader, recovery mod and CM10.1
CM10.1 is 4.2.2, and has root built-in by default. This 4.2.2 also allows you to create more 'users' on the tablet, do all kinds of nice things, and can be finetuned to improve performance (like overclocking). All built-in by default.
Happy Hunting!
Hey, and don't apologise for asking dumb questions, we all started out asking questions, and this forum is really there to get people started on the path of getting the most out of their tablets. Keep on asking, and there is always somebody out there to help you out if you get stuck.
One advise: get the exact model-number of your tablet (build) and register at sammobile to get a plain stock recovery image, so you can always get back to the default setup, and not lose hope when your tablet gets 'bricked'. We have more than enough expensive doorstoppers in the world to need to add one more. Sammobile gives you the recovery image, base on model and country. These stock recovery images are about 450 MB, and can be restored easily with your big friend Odin (see http://forum.xda-developers.com/showthread.php?t=2142268).
Click to expand...
Click to collapse
ricmck said:
THANK YOU VERY MUCH for clarifying my questions and process. In my prior life I was a process engineer (semiconductors, and hydrogen fuel cells). Thus I like clear instructions. I also see now some of the challenges the web and forums like this one present, because links go dead, and new process and data are constantly being created. Thus the "process" is always in flux.
I think I can now go and try this.
Thanks
Rick McK
Click to expand...
Click to collapse
You are welcome. I myself have been a Software Engineer since the early seventies of the 20th century (40+ years of IT), and started out as Computer Operator loading punchcards and papertape into old IBM and UNIVAC computers. The world has changed dramatically since then. Not all good though...
Good luck, and always peruse XDA to get answers to your questions. Sometimes you have to trudge through a lot of mess, but the diamonds are there to find.And ask, ask, ask...
Related
SOLVED: Thanks to ares05 I already got the rom I wanted! I didn't find that specific rom in the first place... Anyway, anyone googles for this same matter can use my thread as an Q&A. The only thing I did to get Neatrom Lite working was putting it on Internal SD (Without wiping data). And flashing it (choose zip from internal SD) from the custom CWM recovery, then reboot. (Yes for beginners, CWM is an requirement!). For Nexus layout lovers try regular Cyanogenmod, Trebuchet or MIUI. They are all great.
----------------------------------------------------------------------------------------------------------------------------------------------
Hello,
Question to myself: did I researched, googled and watch the video upon registration?
Yes, but that doesn't solve my specific problem or provide enough information to try the risky situation.
Problems:
I have trouble upgrading from Android 2.3.5 to 4.0 through Odin3 v1.85. It's very unclear what Rom I need to get to flash.
I flashed through Odin3 Android 4.0 before, through reading a lot and accepted the try and ended up getting boot loops. So I flashed back my android 2.3.5 XWKJ5. that gave me CWM but also voided the possibility to upgrade through Samsung Kies what I regretted later.
Then I thought, Okay... I'll get the basic Custom Rom: Cyanogenmod 9.1 then, through wiping cache/factory and dalvik cache and flashing through zip file on SD card everything went great. But I was unhappy with CM9 because the playstore app didn't work anymore and I didn't liked the overall layout of the camera, apps and some other minor bug I found - I forgot... So I went back to Android 2.3.5 with nandroid backup.
Also I have ROM manager but that doesn't let me update the specific CWM 6.0.1.0 rom as it says "An error occurred while downloading your recovery." Probably more people have this?!
What I need to know to solve this matter:
I want the default (stock) android 4.0+ ICS firmware on my phone with root. Can someone provide me the exact link of the .tar/.tar.md5 file needed to upgrade my phone to that android version or higher if the rom is available for it (4.1.3?). Since I find it hard to search the correct rom needed to get this result. The rom you might provide me can be slightly modded but that's okay, as long as I have all the ICS features and the layout it naturally comes with.
All the current Phone specific data you might found useful in helping me:
Samsung Galaxy S2 (I-9100)*
Android 2.3.5
Gingerbread.XWKJ5
CF-Root 5 Kernel (Root, CWM, Superuser).
+Has made an Nandroid backup through recovery.
+Backed up my apps through Titanium Backup.
*It's no AT&T or T-Mobile version, luckily.
TL;DR: I WANT TO UPGRADE ANDROID 2.3.5 TO 4.0+, WHAT SPECIFIC ROM I NEED TO FLASH?
I hope someone good willing enough is there to help me and I will check this thread often for any replies,
Scy.
There are a bunch of ROMS here which will give you the stock ICS look and feel. I haven't tried all of them but if that's the kinda ROM you want then you could check out the ROM that I'm currently using, Neatrom Lite. Follow the link on my signature to the ROM thread. The latest version for Neatrom is 4.0.4 and you could download it from the link given on the first Page of the thread.
If you wanna try something else you check out the following links :
http://forum.xda-developers.com/showthread.php?p=23562820
This is a thread with an index of all the stock ICS ROMs
http://forum.xda-developers.com/showthread.php?p=23275441
This is an index of all the custom ROMs.
Take your pick.
Sent from a GT-I9100 having a mind of its own
Yeah, that's sort of what I want. The biggest reason of wanting to update is that my brother has stock ics 4.0 and his battery consumes like 50% less energy in locked mode(s), factor in the fact that his update cleaned a lot of the processes and unused apps. Also I am fond of the original stock look - especially the camera controls.
I will try neatrom (lite) later tonight I checked out the official forum Page, looks very very to my liking. I am so excited, thanks for showing will report later if it worked out.
- EDIT -
Yaaaay! Everything went flawlessly, it's cool that there is no Wipe needed as the forum thread indicates. I don't know if it works fluidly yet, but it seems everything is up and running like if it was original ICS. I think the Siyah kernel helps alot in battery usage which means alot to me because I travel alot. I will keep this rom for a long while if no bugs/freezes pop up! Seems so promising, thank you thank you thank you~~!!
I have a Samsung Exhibit 4G (the older model - I have a SGH-T759, NOT the SGH-T679). I have successfully rooted it via the old zergRush exploit (and have a working busybox & SuperSU installed), so now I'm looking for a stable ROM for this device.
So far I've been Googling around and I can't seem to find a copy of CWM or an Android ROM for this device; this is probably some combination of me not knowing where to look, as well as the fact that Samsung decided to create two incompatible phones with the same name not helping at all.
I don't particularly care about having CWM, other than it seems to be the easiest method for flashing ROMs - if there's some other method I don't mind going that route instead. I also don't care that much about having the very latest version of Android - ICS would be just fine, if a stable JB ROM doesn't exist for this device.
Thanks in advance for any advice!
AreaRom
CmdrMoozy said:
I have a Samsung Exhibit 4G (the older model - I have a SGH-T759, NOT the SGH-T679). I have successfully rooted it via the old zergRush exploit (and have a working busybox & SuperSU installed), so now I'm looking for a stable ROM for this device.
So far I've been Googling around and I can't seem to find a copy of CWM or an Android ROM for this device; this is probably some combination of me not knowing where to look, as well as the fact that Samsung decided to create two incompatible phones with the same name not helping at all.
I don't particularly care about having CWM, other than it seems to be the easiest method for flashing ROMs - if there's some other method I don't mind going that route instead. I also don't care that much about having the very latest version of Android - ICS would be just fine, if a stable JB ROM doesn't exist for this device.
Thanks in advance for any advice!
Click to expand...
Click to collapse
As far as I know there is no CWM for this phone. There is a "custom" GB rom (AreaRom V1) from another forum. Enough googleing and you can find it pretty easy. You will need to use Odin to "flash" rom to this device or hemdal (may be spelled wrong). I'm really sad there isn't a lot of development for this phone, it's pretty solid as far as phones go.
I just bout the 759 model, it will be here tomorrow! I didn't know that there were two models of the Exhibit! Does this mean I won't be able to successfully follow the upgrade procedures in the wiki since they are for the 679??
dax702 said:
I just bout the 759 model, it will be here tomorrow! I didn't know that there were two models of the Exhibit! Does this mean I won't be able to successfully follow the upgrade procedures in the wiki since they are for the 679??
Click to expand...
Click to collapse
Indeed. The Exhibit II is the Samsung Galaxy Exhibit 4G. It gets confusing as the original Exhibit seems to have just gotten skipped over, which is sad as it is pretty full featured as far as affordable smart phones go.
Well, when I discovered this, I immediately ordered the correct model off eBay and as soon as the old model arrived, I sent it right back to the seller. The new one should be here today. Now I'm trying to find detailed instructions for this ROM flashing procedure as I've never done it before and don't want to screw it up. Do you know of any detailed instructions available online that don't leave anything to guess? I'm good at following instructions if they're complete.
dax702 said:
Well, when I discovered this, I immediately ordered the correct model off eBay and as soon as the old model arrived, I sent it right back to the seller. The new one should be here today. Now I'm trying to find detailed instructions for this ROM flashing procedure as I've never done it before and don't want to screw it up. Do you know of any detailed instructions available online that don't leave anything to guess? I'm good at following instructions if they're complete.
Click to expand...
Click to collapse
Of the to of my head I don't as I don't have this phone. Usually it involves installing clockworkmod recovery via Samsung Kies. Then downloading the ROM you want and installing via CWM. Check in the "general" forum... There are usually a few guides to rooting, CWM, and custom ROM installation.
Thanks, I am reading about it now. When they say "flash clockworkmod" does that simply mean to install it?
dax702 said:
Thanks, I am reading about it now. When they say "flash clockworkmod" does that simply mean to install it?
Click to expand...
Click to collapse
Yes, flash = Install.
Hello there!
I'm a complete noob when it comes to rooting and other related stuff so I could use some help. I want to install Cyanogenmod 10 (or 10.1 if it actually is usable and mostly stable / it is easier or more noobproof to install) for the first time and I would like to know what do I need to know before starting to follow any tutorials for flashing new kernels etc. There are just so so many tutorials for this and I don't know which one I should follow to not brick my phone as I just can't afford a new phone if I manage to brick this one and I just want to get everything out of this phone.
All this Clockworkmod, Odin, Rooting and everything just confuses me and I don't know where to start. If I've understood correct the first thing I should do is I should download some custom kernel as this is something which runs "under" the Android (kind of like bios for computers?) and allows me superuser access=rooting? Then after I got new rooted kernel done I should install Odin or ClockworkMod which acts like a "backup" if something goes wrong? And lastly I should flash in the Cyanogenmod 10 or 10.1 depending which is more hassle-free for everyday use (I'd like to get as much customization as possible for my phone) and has more features and more stable.
My phone model is GT-I9100 so it's the international one (I live in Finland so no Verizon or other model of it.. that much I understand at least) and my Android version is 4.0.4 the 100% stock version of it.
I'm tired of waiting for the slow Samsung people in Finland to get the official Jelly Bean release to be done and I want all that project butter goodness NOOOOOOW. So...
TLR: I have Samsung Galaxy S2 (GT-I9100).I want to get CM 10 or CM.10.1 the noobproofest way possible, can't afford to brick. Can you guide me to a good tutorial with easy to follow orders and up-to-date versions of Cyanogenmod as I don't want CM7, but the latest GOOD Jelly Bean version or just tell me how to do this? I will answer any questions you might have about my phone or anything. I'm not stupid when it comes to computers, but phones are totally new thing to me and I don't want to flash new jelly bean with some random tutorials from youtube as I'm afraid of getting a bricked phone (or missing out some great features from other Jelly Bean releases). I want the best for everyday use, most stable and the one with most customization options version of CyanogenMod Jelly Bean for my S2.
Thanks in advance! I will be monitoring this thread actively so I answer possible questions quick.
I think you're a bit confused at some points.. I assume you're on ICS now. First you have to root your phone by flashing a custom kernel (which gaines you root access) like Siyah WITH Odin. Steps are descriped in enough guides on xda.
When you've rooted your phone, it's best to make a Nandroid back up in Recovery Mode (CWM), you get CWM automatically with flashing Siyah, just in case anything goes wrong.
After this you may choose to flash a custom rom, mostly done with CWM recovery. Steps for this part are almost always written at the instructions on the first post of a rom thread, so read them carefully.
About Project Butter: this isn't fully implemented in CM, so flash the JB-leak from Samsung, or a rom based on it (or wait for the official release).
Sent from the Matrix
Donnie Sins said:
I think you're a bit confused at some points.. I assume you're on ICS now. First you have to root your phone by flashing a custom kernel (which gaines you root access) like Siyah WITH Odin. Steps are descriped in enough guides on xda.
When you've rooted your phone, it's best to make a Nandroid back up in Recovery Mode (CWM), you get CWM automatically with flashing Siyah, just in case anything goes wrong.
After this you may choose to flash a custom rom, mostly done with CWM recovery. Steps for this part are almost always written at the instructions on the first post of a rom thread, so read them carefully.
About Project Butter: this isn't fully implemented in CM, so flash the JB-leak from Samsung, or a rom based on it (or wait for the official release).
Sent from the Matrix
Click to expand...
Click to collapse
Yes I'm running 4.0.4 forgot to add that sorry. That clears many things up thank you! Oh... I thought that Project Butter was fully implemented on every 4.1.X ROM. Now I'm having hard time deciding if I should flash CM10 or just wait for the official Jelly Bean release which is supposed to come next month in Finland... I just want my phone to be really, really fluid and I'm not really pleased with this current 4.0.4 and all these unneeded programs like all the Samsung Hub programs.
Afternoon all,
I have a Prime that presently has Android version "4.0.3" and build number "AndroWook Prime v2.1". I am attempting to upgrade to the lastest Hairybean release, but I am uncertain as to which instructions to follow as I am unable to determine my bootloader version. Any suggestions?
Thanks
CoosaCounty said:
Afternoon all,
I have a Prime that presently has Android version "4.0.3" and build number "AndroWook Prime v2.1". I am attempting to upgrade to the lastest Hairybean release, but I am uncertain as to which instructions to follow as I am unable to determine my bootloader version. Any suggestions?
Thanks
Click to expand...
Click to collapse
I got confused there for a minute but you are talking about Androwook 2.1 and not Androwook Hairybean 2.1.
By the Android version number you are still on ICS.
I would highly advise that you go thru the nvflash process first as you can only do it while on ICS and it makes you brick proof.
Once you have done that you just have to follow the instructions in the Hairybean thread for 2.2 which will upgrade your bootloader and recovery and then flash the rom.
I'd wait a week tho as 2.3 is due soon.
flumpster said:
I got confused there for a minute but you are talking about Androwook 2.1 and not Androwook Hairybean 2.1.
By the Android version number you are still on ICS.
I would highly advise that you go thru the nvflash process first as you can only do it while on ICS and it makes you brick proof.
Once you have done that you just have to follow the instructions in the Hairybean thread for 2.2 which will upgrade your bootloader and recovery and then flash the rom.
I'd wait a week tho as 2.3 is due soon.
Click to expand...
Click to collapse
Thank you very much for the reply; I was unaware that they are two different roms. I am going to find how to follow the nvflash process as you advised.
Thanks again.
CoosaCounty said:
Thank you very much for the reply; I was unaware that they are two different roms. I am going to find how to follow the nvflash process as you advised.
Thanks again.
Click to expand...
Click to collapse
Androwook was based off ICS. When it switched to Jellybean it became Androwook HairyBean.
nvflash is definitely worth it mate. There are people on here who would kill to go back to ICS so they could nvflash backup
Related question to this thread
flumpster said:
Androwook was based off ICS. When it switched to Jellybean it became Androwook HairyBean.
nvflash is definitely worth it mate. There are people on here who would kill to go back to ICS so they could nvflash backup
Click to expand...
Click to collapse
My query is somewhat related, and apologies before it it has previously been addressed in another thread, so I won't start a new thread for my related query.
I have just purchased an ex-display model Asus EeePad Prime here in the UK on eBay for about the third of the price as a new one. So far, all seems to be working and running fine, dongleless Wi-Fi included, but I have a question.
As soon as I turned on Wi-Fi and connected with my router, my Asus Prime started 'automatically' downloading what I assume is (the latest) firmware, I couldn't find a way to cancel the download (no user-manual, unfortunately), so I immediately turned off Wi-Fi, as I have no idea what version firmware my Prime is downloading. Right at the moment, it's running stock 4.0.3, but I don't want it downloading some firmware that I may regret at some point later. So, may I ask, is it advisable to let the firmware download and do its thang, or wait for another, different or better firmware. I am totally new to using tablets and my only other Android device is a Samsung Galaxy S3 running JB 4.1.2,
Without reading through an online manual (probably a fruitless exercise anyway) or wading though hundreds of forum posts, would one of you more experienced in firmware than I, be good enough to advise me about which is the best, most stable firmware I should be running on my Asus Prime, as well as how to disable automatic firmware updates (I couldn't find an option for that in the settings yet), and any more cautionary steps I should be advised to take before I mess up or brick my new tablet....OR point me to a thread that already has the answers to my questions here?
I'm finding this a bit frustrating, as obviously, I can't use Wi-Fi for anything else until I have an answer as to how to stop automatic downloading of firmware via Wi-Fi.....help?!?
Many thanks before.
NB.
My Kernel version:-
2.6.39.4
android @venus #1
Al.Gray said:
My query is somewhat related, and apologies before it it has previously been addressed in another thread, so I won't start a new thread for my related query.
I have just purchased an ex-display model Asus EeePad Prime here in the UK on eBay for about the third of the price as a new one. So far, all seems to be working and running fine, dongleless Wi-Fi included, but I have a question.
As soon as I turned on Wi-Fi and connected with my router, my Asus Prime started 'automatically' downloading what I assume is (the latest) firmware, I couldn't find a way to cancel the download (no user-manual, unfortunately), so I immediately turned off Wi-Fi, as I have no idea what version firmware my Prime is downloading. Right at the moment, it's running stock 4.0.3, but I don't want it downloading some firmware that I may regret at some point later. So, may I ask, is it advisable to let the firmware download and do its thang, or wait for another, different or better firmware. I am totally new to using tablets and my only other Android device is a Samsung Galaxy S3 running JB 4.1.2,
Without reading through an online manual (probably a fruitless exercise anyway) or wading though hundreds of forum posts, would one of you more experienced in firmware than I, be good enough to advise me about which is the best, most stable firmware I should be running on my Asus Prime, as well as how to disable automatic firmware updates (I couldn't find an option for that in the settings yet), and any more cautionary steps I should be advised to take before I mess up or brick my new tablet....OR point me to a thread that already has the answers to my questions here?
Many thanks before.
NB.
My Kernel version:-
2.6.39.4
android @venus #1
Click to expand...
Click to collapse
You are still on ICS and at the moment you can make nvflash backups that will make you completely brickproof. It will also allow you to go back to ICS from jellybean if you wanted to which people without the backups cannot do.
I would highly advise that you make these backups before upgrading anything.
You will need an unlocked bootloader to be able to do nvflash.
http://androidroot.mobi/pages/tegra3-guide-nvflash/
flumpster said:
You are still on ICS and at the moment you can make nvflash backups that will make you completely brickproof. It will also allow you to go back to ICS from jellybean if you wanted to which people without the backups cannot do.
I would highly advise that you make these backups before upgrading anything.
You will need an unlocked bootloader to be able to do nvflash.
http://androidroot.mobi/pages/tegra3-guide-nvflash/
Click to expand...
Click to collapse
Thanks for that tidbit, certainly something I'll need to look into (after finding 'Nerves of Steel' <g> ).....but more concerned about disabling this (unknown) firmware update auto-downloading first?.......Diolch i ti ffrind!
NB.
Guess I should read up as much as I can on AndroWook too, eh?
Oddly, the automatic firmware update OTA download has (thankfully) stalled/stopped/stuck at 23% and I have no idea what I did to stop it downloading or even how. Anyone got a clue to help me figure it out? All other downloads via Wi-Fi are working as they should.
But, saying the firmware download has stopped, is there any way that anyone knows off to cancel/delete the 23% of it that has been automatically downloaded and taking up valuable space on my internal memory, please? (I'm guessing I'd need to root my Prime to do that?)
One last important (important to me anway lol), question.....is it advisable or not to make those nvflash backups before of after rooting my ICS 4.0.3 firmware (I was thinking of using 'Viper' to root it, or maybe you guys can suggest a better application to use?), or won't rooting it before I've made those backups make any difference? Please advise, thanks.
Hope that's not too many dumb questions, but hope one of you if good and has time enough to answer them for me........ANYone......please??
Hello Guys,
I am new To XDA and recently registered. So I am not sure that I am writing this thread in right place or not. So, please tell me the right place if i am wrong.
Ok, I have Samsung Galaxy A5 (2014)/(2015) (SM-A500G). It came with Android 5.0.2 Lollipop.
As most of you know that few months earlier samsung rolled out the marshmallow upgrade (6.0.1).
I upgraded but my device performance considerably reduces. Even some daily used to tasks start giving too much load to the device. In small words, Device started to hang too many times than earlier.
And some of you may suggest the reasons like:- Nearly complete storage, Power Saving, Too much apps, Virus and malware etc.
(Samsung Help Center Suggested it). But i can assure you this is not the reason. My storage is almost 70% free. etc etc.
The real reason is MARSHMALLOW UPGRADE.
So, I think the best way to solve it is Rooting.
But I am an newbie to the world of rooting. I don't know what is custom recovery, TWRP, Odin, CF-Autoroot etc.
I only heard there names but nothing else.
This doesn't mean that I know nothing about how android works and what is custom ROMs. I can manage these things; but not the above mentioned.
So please anyone of you can tell a detailed guide how to root galaxy A5 (2014) on marshmallow 6.0.1 with all the steps mentioned
and what each steps do. It will be very helpful.
And few things more, 1] I am thinking that after rooting I reinstall the official Marshmallow ROM; as earlier I updated my phone by OTA update and so might it cannot get to it's full potential. I am not sure that this method will work or not, so please clarify this point also.
2] My only source of Internet Connection is the device itself by making hotspot. So please please guys, give me a fully tested crash proof way to do rooting. I don't want to brick my device ( No one wants but in this case if it happens I can't find some way on the internet to reverse it). And you can also suggest any before hand precautions like full Backup of current system image etc etc. that will help if something goes wrong.
3] I already read a few threads on XDA about this issue but I cannot understand properly, so please don't provide links to these threads.
4] Also please provide a list of official and unofficial ROMs for A5
Thanks in advance
I have to read some pages to find a good tutorial but I'll find one. I root Samsung phones all the time. Its not going to brick your device. Asking here was smart, don't trust any website you find off google without fully understanding. Also, you can not install stock ROMs from custom recovery, only from a computer. That process is easy. Download the firmware and flash it. The other choice is custom ROM and recovery. Let me know what option you want to go with and I'll explain more. There are good custom ROMs, ressurection remix. Lineage os. Ice, tipsy is a good one. I use RR on my S5 and s7
godkingofcanada said:
I have to read some pages to find a good tutorial but I'll find one. I root Samsung phones all the time. Its not going to brick your device. Asking here was smart, don't trust any website you find off google without fully understanding. Also, you can not install stock ROMs from custom recovery, only from a computer. That process is easy. Download the firmware and flash it. The other choice is custom ROM and recovery. Let me know what option you want to go with and I'll explain more. There are good custom ROMs, ressurection remix. Lineage os. Ice, tipsy is a good one. I use RR on my S5 and s7
Click to expand...
Click to collapse
Thanks for reply. I really appreciate it.
I read your reply but can't understand it fully. The reason is simple- I currently don't know what is Custom recovery and Flashing. Please explain these terms first and then I will tell what way I want.
Thanks.
A custom recovery allows you to flash zip files and operating systems from your phone directly, but only custom operating systems, not the official Samsung firmware. It is safe to use. Flashing stock firmware is the operating system as Samsung released it with nothing changed. You can gain root access to your device on stock or custom. Usually custom removes the carrier and Samsung stuff that takes up phone memory. It depends on what you want to use your phone for.
OK I go for samsung stock (official) ROM
Flashing is installing the contents of the package to your phone with a special tool like Odin or a custom recovery. And recovery is the menu on your phone from which you can restore backups or flash files.
---------- Post added at 03:29 PM ---------- Previous post was at 03:25 PM ----------
https://www.sammobile.com
Create an account on this site, it is free. Locate firmware 5.1.1 for your device, and make sure it is the same as your cellular service provider. So if you are on AT&T download a5 5.1.1 AT&T firmware file. It will be a large file. Once you have the file you will need a computer application named Odin. I will post a link for it shortly.
Hey wait a second. there's 6.0.1 or 5.0.2 files present. no 5.1.1.
Sorry, I replied too late. Actually caught in busy work.
Ok, I googled to know more about rooting etc. etc.
And I got a few uderstanding.
Then I re-read your replies and fully understood them.
Then something came to my mind:-
I am currently on 6.0.1 and Want to re-install it. So I currently downloaded 6.0.1 firmware from sammobile.
So, I don't know Odin can reinstall firmwares or not.
Just for your knowledge. See If we are going right or not.
Thanks
Hey, Anyone out there, please help me.
Might You Mygalaxya