Cant Turn on Samsung galaxy s2 after failing at rooting - Galaxy S II Q&A, Help & Troubleshooting

PLEASE Help i cant turn on my samsung after rooting it ( its my dads and he would get really angry if he would get out that i messed up his phone guys please help :crying:, i was rooting my phone with odin, and after a while i thought it crashed so i turned my phone off, and after that i cant turn it on again!
I cant do anything there is just a black screen
guys plase help!!!

kristofer_gvenetadze said:
PLEASE Help i cant turn on my samsung after rooting it ( its my dads and he would get really angry if he would get out that i messed up his phone guys please help :crying:, i was rooting my phone with odin, and after a while i thought it crashed so i turned my phone off, and after that i cant turn it on again!
I cant do anything there is just a black screen
guys plase help!!!
Click to expand...
Click to collapse
Sorry about that.
Please provide answers to the following questions:
1. What's the model no. Of your galaxy SII?
2. What were you trying to flash too gain root access? please provide the link to where you find it.
3. Can you still get to download mode?
Swyped from my Samsung Galaxy SII

Replyy
Jokesy said:
Sorry about that.
Please provide answers to the following questions:
1. What's the model no. Of your galaxy SII?
2. What were you trying to flash too gain root access? please provide the link to where you find it.
3. Can you still get to download mode?
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
my model number is GT-I9100, nothing happens when i push the power button, nor then i connect it to a charger.

kristofer_gvenetadze said:
my model number is GT-I9100, nothing happens when i push the power button, nor then i connect it to a charger.
Click to expand...
Click to collapse
What about other answers?
Swyped from my Samsung Galaxy SII

Reply
Jokesy said:
What about other answers?
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
it is an outside link i cant post it here ( it s called "Android 2.3.6 JVU + Root"

JVU is for i9000 not 9100.
You have bricked this phone by flashing inproper firmware with bootloader dedicated for olde model.
i9.0.1.3k galaxy imperator

Can you get into recovery or download mode.Take out the battery for 5 minutes and/or charge the phone for a bit and retry.
ps. your fathers not going to be happy
Sent from my GT-I9100 using xda premium

Reply
theunderling said:
Can you get into recovery or download mode.Take out the battery for 5 minutes and/or charge the phone for a bit and retry.
ps. your fathers not going to be happy
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
i cant turn it on nothing happens when i push the power button as i said, so No download mode no recovery mode for me.

Thx
SirKunon said:
JVU is for i9000 not 9100.
You have bricked this phone by flashing inproper firmware with bootloader dedicated for olde model.
i9.0.1.3k galaxy imperator
Click to expand...
Click to collapse
Thx for letting me know, but what should i do now, i cant turn it even on, nothing happens when i push the power button

kristofer_gvenetadze said:
Thx for letting me know, but what should i do now, i cant turn it even on, nothing happens when i push the power button
Click to expand...
Click to collapse
Plead ignorance and send it in for warranty repair. I hard bricked my SGS2 last week and it was repaired under warranty, no questions asked. If the repairers can't turn it on they can't tell you voided the warranty and they will just replace the motherboard. In Australia it takes 5 -10 working days.
If it is out of warranty there is a place in the US that claims to be able to repair a hard bricked SGS2, google is your friend.

Additional Info
kapioonda said:
Plead ignorance and send it in for warranty repair. I hard bricked my SGS2 last week and it was repaired under warranty, no questions asked. If the repairers can't turn it on they can't tell you voided the warranty and they will just replace the motherboard. In Australia it takes 5 -10 working days.
If it is out of warranty there is a place in the US that claims to be able to repair a hard bricked SGS2, google is your friend.
Click to expand...
Click to collapse
Isn´t there any other way solving this problem cuz currently i am in Georgia and there is no Samsung Center?

Search for jtag in your country... That will fix a hard brick
Sent from my SGH-I897 using Tapatalk 2

spagman72 said:
Search for jtag in your country... That will fix a hard brick
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
is that someonekind of a programm?
sry i am new to rooting android phones

kristofer_gvenetadze said:
is that someonekind of a programm?
sry i am new to rooting android phones
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1192853

Related

New qeustion old thread please answer

Okay so after much and much reachersh
I got odin to pick up my ace but the screen does not go on......
And then when I say flash it just says setting up conection and stays there
Any help???
You can try with a JIG (Dongle USB) ..if Download Mode on your Ace isn't damaged it would start in Download Mode, then Flash Firmware with Odin
It seems he was using the old version of RZ recovery which had the boot.img bug. He might not have updated to the latest fixed version.
Sent from my GT-S5830 using Tapatalk 2
!_Ale13star_! said:
You can try with a JIG (Dongle USB) ..if Download Mode on your Ace isn't damaged it would start in Download Mode, then Flash Firmware with Odin
Click to expand...
Click to collapse
Thanks but is there not anyother way as I obviosly don't have one and I don't have anhouter working phone
tj_droid said:
It seems he was using the old version of RZ recovery which had the boot.img bug. He might not have updated to the latest fixed version.
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
Maby....I don't know anyway to fix it??
I think no if recovery and Download Mode don't start..
Last year i bricked my old Galaxy S..recovery doesn't starts, Download Mode doesn't starts..so i bought a JIG ..just putted it in my Galaxy S and in 3-5 seconds it autostarts in Download Mode
When i bought a second hand Galaxy Ace a few weeks ago i find my jig and i tried it on Ace, my phone automatically starts in Download Mode so it is 100% compatible with Galaxy Ace you can be sure buying it
Ok thanks from what I read online it looks like it works
So I am gonna try and make one
THANKS!
Sure..tested by me
and remember CWM recovery backups doesn't work on RZ
Dude i really dont think CWM backups work on RZ!!!
Okay okay I just thought I would try cuz I figered that nothing bad could happen that I could just reflash a new rom if the rom does not boot but...
OBVIOSLY NOT!
ANDROIDCUSTOMIZe said:
Okay okay I just thought I would try cuz I figered that nothing bad could happen that I could just reflash a new rom if the rom does not boot but...
OBVIOSLY NOT!
Click to expand...
Click to collapse
Give it to the samsung guys and tell them it just stopped working when you woke up one fine morning
Yes but...it was rooted
umm..okay..but if it wont turn on how would they know if its rooted or no? when they actually fix the phone and get it working they cant deny you the phone!! they cant be like "you rooted this phone and we worked on it so we wont return it"
HAHA Yes but I'm gonna make the JIG cuz it's fun and might just work
King ACE said:
umm..okay..but if it wont turn on how would they know if its rooted or no? when they actually fix the phone and get it working they cant deny you the phone!! they cant be like "you rooted this phone and we worked on it so we wont return it"
Click to expand...
Click to collapse
I believe they have the ability to open up the internal chip and find files in there
This was sent from a Galaxy Ace. Problem?
EmoBoiix3 said:
I believe they have the ability to open up the internal chip and find files in there
This was sent from a Galaxy Ace. Problem?
Click to expand...
Click to collapse
mostly the second download mode which ace have that is arm dump mode or whatever can directly interact with insides.. if phone can enter that thing then it is recoverable by them..
i saw something similar in Galaxy R thread to recover it from hardbrick.. but no such files are there for SGA
EmoBoiix3 said:
I believe they have the ability to open up the internal chip and find files in there
This was sent from a Galaxy Ace. Problem?
Click to expand...
Click to collapse
exactly.
We should send some spies to Samsung Service Centre. LOL
Sent from my WAREZ impulses.
yeowwwai said:
We should send some spies to Samsung Service Centre. LOL
Sent from my WAREZ impulses.
Click to expand...
Click to collapse
Or bribe the ones already working there..
With a HTC One X..lol
Hey guys thanks for all the reply's I made a JIG but no luck then after watching this video
http://www.youtube.com/watch?v=dpEnEQ4Na1Y
I give up so I am now sending it to service centre hoping they will fix it....
My symptoms are the same
THANKS AGAIN
IF U GOT ANY INFO ON HOW TO FIX PEASE PM ME!!!

S2 I9100 won't start after flashing CM9 Stable

Hello Friends,
I am in desperate need of your help.
I am a moderate user and I know how to stuffs about Rooting and flashing custom ROMs.
Today I tried to flash CM9 stable ROM for International Galaxy S2 I9100. I did it using temporary CWM.zip file and everything went just fine till the installation of ROM. But when I clicked Wipe Data, suddenly phone went off and now it doesn't start.
I tried everything, tried to enter into Download mode and Recovery mode but all was in vain.
Please help me what should I do now? And is my phone ever going to come back to life?
Additional Info
satish0101 said:
Hello Friends,
I am in desperate need of your help.
I am a moderate user and I know how to stuffs about Rooting and flashing custom ROMs.
Today I tried to flash CM9 stable ROM for International Galaxy S2 I9100. I did it using temporary CWM.zip file and everything went just fine till the installation of ROM. But when I clicked Wipe Data, suddenly phone went off and now it doesn't start.
I tried everything, tried to enter into Download mode and Recovery mode but all was in vain.
Please help me what should I do now? And is my phone ever going to come back to life?
Click to expand...
Click to collapse
To add into this.
I was using,
PDA: I9100XWLPT
CSC: I9100NEELP4
Version: 4.0.4
Do you know what kernal you had at the time, for the phone to go off during a wipe sounds like the brick bug but I didn't think it was present in LPT. Can other members clarify please. Does your phone charge when plugged into charger?
Sent from my GT-I9100 using xda premium
satish0101 said:
To add into this.
I was using,
PDA: I9100XWLPT
CSC: I9100NEELP4
Version: 4.0.4
Click to expand...
Click to collapse
I'm sorry but that's your fault.
It's being said 1 million times already, that wiping your data in CWM while running stock 4.0.4 ROM with a stock kernel will BRICK your phone.
Your inability to read might have left your phone bricked.
Read through the forum next time, ask questions if you don't understand anything and I can assure you will be luckier next time.
Swyped from my Samsung Galaxy SII
Yes there are many threads in this section and on xda portal warning you about the brick bug...
Almost all 4.0.4 have a brick bug... moreover it is caused when we do a data wipe. I believe you have bricked your device... sorry for that
Sent from my GT-I9100 using Tapatalk 2
sachidanand444 said:
Yes there are many threads in this section and on xda portal warning you about the brick bug...
Almost all 4.0.4 have a brick bug... moreover it is caused when we do a data wipe. I believe you have bricked your device... sorry for that
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Hi, I thought the brick bug was present in only the leaked firmwares and those highlighted on samfirmware eg the Russian release LQ6 I think.
Sent from my GT-I9100 using xda premium
HANDSY said:
Hi, I thought the brick bug was present in only the leaked firmwares and those highlighted on samfirmware eg the Russian release LQ6 I think.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
that's why I blamed you for this. You did not read or ask before wiping but was only guessing.
This is a sticky thread under General section warning everyone about the buck bug. Here: http://forum.xda-developers.com/showthread.php?t=1756242
I and many others have also warned people about this bug but the unfortunate thing is that most of ask these kind of questions after the problem has occurred.
Swyped from my Samsung Galaxy SII
Jokesy said:
that's why I blamed you for this. You did not read or ask before wiping but was only guessing.
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Er I'm not the OP
Sent from my GT-I9100 using xda premium
HANDSY said:
Hi, I thought the brick bug was present in only the leaked firmwares and those highlighted on samfirmware eg the Russian release LQ6 I think.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
As far as I know all 4.0.4 ROMS have MMC_CAP_ERASE enabled, so in case of having bad chip and using wipe under temporary CWM floating around you will brick your phone. Although seems the problem is only in touch version of CWM. More detailed information can be found in 1st guide in my signature where Phil was talking with Entropy512.
Odoslané z GT-I9100 cez Tapatalk 2
Stileth said:
As far as I know all 4.0.4 ROMS have MMC_CAP_ERASE enabled, so in case of having bad chip and using wipe under temporary CWM floating around you will brick your phone. Although seems the problem is only in touch version of CWM. More detailed information can be found in 1st guide in my signature where Phil was talking with Entropy512.
Odoslané z GT-I9100 cez Tapatalk 2
Click to expand...
Click to collapse
Will do thanks
Sent from my GT-I9100 using xda premium
^^Not only with touch CWM but also with "temporary CWM" wjich is what you were using.
Take it to a service center as your phone now needs a motherboard replacement..and I hope you still have warranty..!
Sent from my GT-I9100 using Tapatalk 2
satish0101 said:
Hello Friends,
I am in desperate need of your help.
I am a moderate user and I know how to stuffs about Rooting and flashing custom ROMs.
Today I tried to flash CM9 stable ROM for International Galaxy S2 I9100. I did it using temporary CWM.zip file and everything went just fine till the installation of ROM. But when I clicked Wipe Data, suddenly phone went off and now it doesn't start.
I tried everything, tried to enter into Download mode and Recovery mode but all was in vain.
Please help me what should I do now? And is my phone ever going to come back to life?
Click to expand...
Click to collapse
Sorry dude
You might have to send your phone to device center for repairs but if you are out of warranty or wants to try to Fix things yourself, then the advise/instructions below is for you:
-boot your phone with usb jig, if you can get to download mode, then proceed to next step
-Visit this thread: http://forum.xda-developers.com/showthread.php?t=1841099
Good luck
Swyped from my Samsung Galaxy SII
Is the brick bug present in ICS? I want to upgrade from Gingerbread to ICS 4.0.3, will I be safe when flashing then?
UrbanDesigns said:
Is the brick bug present in ICS? I want to upgrade from Gingerbread to ICS 4.0.3, will I be safe when flashing then?
Click to expand...
Click to collapse
Brick bug is only present on ICS 4.0.4.
ICS 4.0.3 is safe
Swyped from my Samsung Galaxy SII
Thanks
Hi guys,
Thanks for all your replies.
I already figured it out that I have bricked my phone. But I was under impression that Data wipe with CM9 ROMs is not dangerous. At the time of failure I had already installed CM9.
Guess now I'll have to send the phone to Service center.
One thing I want to ask, "If the phone is hard bricked, is there any chance of them knowing that I had installed a custom ROM?"
If they can't then it might help me since my phone is still under 1 year manufacturer warranty.
Please reply and Thank you for your replies. The latest adventure of mine turned out to be painful one!!
satish0101 said:
Hi guys,
Thanks for all your replies.
I already figured it out that I have bricked my phone. But I was under impression that Data wipe with CM9 ROMs is not dangerous. At the time of failure I had already installed CM9.
Guess now I'll have to send the phone to Service center.
One thing I want to ask, "If the phone is hard bricked, is there any chance of them knowing that I had installed a custom ROM?"
If they can't then it might help me since my phone is still under 1 year manufacturer warranty.
Please reply and Thank you for your replies. The latest adventure of mine turned out to be painful one!!
Click to expand...
Click to collapse
I don't think so. since you can't boot into either recovery or download mode.
Even if you have an increased binary counter, it will be cleared once your device is forced with a usb jig to boot into download mode.
Swyped from my Samsung Galaxy SII
Jokesy said:
I don't think so. since you can't boot into either recovery or download mode.
Even if you have an increased binary counter, it will be cleared once your device is forced with a usb jig to boot into download mode.
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Then USB Jig is my last hope and if that doesn't work then I have to send the phone to the service center.
So if you can't enter into download or recovery mode there is no way to find out if i have used any custom ROM or rooted the phone?
Correct me if I'm wrong.
And thank you for your reply. In this desperation every reply from community member is like gold.
satish0101 said:
Then USB Jig is my last hope and if that doesn't work then I have to send the phone to the service center.
So if you can't enter into download or recovery mode there is no way to find out if i have used any custom ROM or rooted the phone?
Correct me if I'm wrong.
And thank you for your reply. In this desperation every reply from community member is like gold.
Click to expand...
Click to collapse
Absolutely no way. You are right
Swyped from my Samsung Galaxy SII
Jokesy said:
Absolutely no way. You are right
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Thanks buddy.
I believe I have to send the phone to Samsung Service center then!!
Jokesy said:
Absolutely no way. You are right
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Hello guys,
After receiving positive feedback from members I have finally submitted my phone to service center.
Please pray and hope they don't find out about my little adventure!!

Galaxy S2 Bricked or NOT??

i installed a custom rom to the Galaxy S2 everything was working fine booted up and everything.. But then i try to put a Original Kernel File back to the phone to get rid of the Yellow explanation mark in the boot screen then i went into Recovery and cleared the usual Davik cache, cleared file permissions ect. But then when i rebooted it i got a black screen it was'nt coming back on, so i took out the battery ect and still nothing on screen!! i cant even get into recovery mode or anything its completely dead.. i've even left out the battery put batt back in but still nothing.. i stheir a way i can revive this phone?? Cheers.. PLEASE HELP... :crying:
Did you try to reset the phone to factory setting?
Sent from my GT-I9100 using xda premium
gs2rom said:
Did you try to reset the phone to factory setting?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I'm unable to do anything with it now! no power NOTHING. My batt was nearly full when it went off so i know its not the batt and even when i put cable in with batt in it still does'nt show anything on screen..
aviz06 said:
i installed a custom rom to the Galaxy S2 everything was working fine booted up and everything.. But then i try to put a Original Kernel File back to the phone to get rid of the Yellow explanation mark in the boot screen then i went into Recovery and cleared the usual Davik cache, cleared file permissions ect. But then when i rebooted it i got a black screen it was'nt coming back on, so i took out the battery ect and still nothing on screen!! i cant even get into recovery mode or anything its completely dead.. i've even left out the battery put batt back in but still nothing.. i stheir a way i can revive this phone?? Cheers.. PLEASE HELP... :crying:
Click to expand...
Click to collapse
What's your ROM details?
Swyped from my Samsung Galaxy SII
Jokesy said:
What's your ROM details?
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
I Updated to this rom >>GT-I9100 Resurrection Remix JB v3.0.4[16/08][AOKP JB PRE](AROMA+OTA) <<
Could you doing wipe?
Sorry for my english
Envoyer depuis mon S2 avec tapatalk
---------- Post added at 09:13 PM ---------- Previous post was at 09:08 PM ----------
Could you doing wipe?
After installing and before reboot i think you must do 3 wipes for this ROM.
Sorry for my english
Envoyer depuis mon S2 avec tapatalk
aviz06 said:
I Updated to this rom >>GT-I9100 Resurrection Remix JB v3.0.4[16/08][AOKP JB PRE](AROMA+OTA) <<
Click to expand...
Click to collapse
from which ROM?
With what kernel?
Swyped from my Samsung Galaxy SII
try download mode..
or pressing volume down and connecting it to pc at the same time.. (you´ll end up in download mode or your phone is pretty dead)
Jokesy said:
from which ROM?
With what kernel?
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
from a stock rom with Kernel_I9100XWLPT insecure then i wrote the custom rom and then put the original kernel back on to get rid of the yellow exclamation mark rebooted then nothing!
aviz06 said:
from a stock rom with Kernel_I9100XWLPT insecure then i wrote the custom rom and then put the original kernel back on to get rid of the yellow exclamation mark rebooted then nothing!
Click to expand...
Click to collapse
That was the problem.
Your kernel has brick bug, it's being said 1 million times but you did not read it or ask questions before messing around with your device.
I'm afraid your device may be hard bricked.
I'm sorry.
Let's see what can be done.
If you can get to download mode with combined buttons or usb jig then visit this thread: forum.xda-developers.com/showthread.php?t=1841099
Swyped from my Samsung Galaxy SII
Jokesy said:
That was the problem.
Your kernel has brick bug, it's being said 1 million times but you did not read it or ask questions before messing around with toot device.
I'm afraid your device may be hard bricked.
I'm sorry.
Let's see what can be done.
If you can get to download mode with combined buttons or usb jig then visit this thread: forum.xda-developers.com/showthread.php?t=1841099
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
ok m8 thanks for the info, but because the phone is only 4mths old i have requested a service repair with samsung so im gonna send it off tomoz to get sorted.. is their a way samsung can find out if i been messing with it or will they just flash with stock firmware anyways once they can get it to boot? or will they just replace the board? Thanks. Mick.
aviz06 said:
ok m8 thanks for the info, but because the phone is only 4mths old i have requested a service repair with samsung so im gonna send it off tomoz to get sorted.. is their a way samsung can find out if i been messing with it or will they just flash with stock firmware anyways once they can get it to boot? or will they just replace the board? Thanks. Mick.
Click to expand...
Click to collapse
If it's hard bricked there is nothing us users can do to get the phone back but I'd imagine it wouldn't be too hard for Samsung to realize what you've done
Good luck :good:
UrbanDesigns said:
If it's hard bricked there is nothing us users can do to get the phone back but I'd imagine it wouldn't be too hard for Samsung to realize what you've done
Good luck :good:
Click to expand...
Click to collapse
Hopefully they should repair.. Thats the only option i have left.. Stupid me i only just bought it as well!
i'll keep u updated and let u know if it was repaired? i here a few peeps get similar probs when trying to update to custom firmware's and samsung do repair and send them back to their customers..:fingers-crossed:
I hope you will have your phone working again dude, and I want to ask a question to Jokesy, is there a brickbug or something bad about XWLP7 ? Because if I turn back to stock rooted SGS2 , i will use XWLP7.
teror300 said:
I hope you will have your phone working again dude, and I want to ask a question to Jokesy, is there a brickbug or something bad about XWLP7 ? Because if I turn back to stock rooted SGS2 , i will use XWLP7.
Click to expand...
Click to collapse
No, there is no brick bug on XWLP7
Jokesy said:
No, there is no brick bug on XWLP7
Click to expand...
Click to collapse
Oh ok, Thanks for answer.
teror300 said:
Oh ok, Thanks for answer.
Click to expand...
Click to collapse
You are welcome
just an update on my BRICKED phone, i got it back today from samsung repair center all working as normal now and back to life! Thankyou Samsung!! :highfive:
Now were/what is the best way to root my S2 without doing this again? or is it best just to leave it as is?..
aviz06 said:
just an update on my BRICKED phone, i got it back today from samsung repair center all working as normal now and back to life! Thankyou Samsung!! :highfive:
Now were/what is the best way to root my S2 without doing this again? or is it best just to leave it as is?..
Click to expand...
Click to collapse
And people say Samsung has a bad customer service, Samsung FTW
The easiest way to Root your phone is probably the Chainfire Root, which you can find here:
http://forum.xda-developers.com/showthread.php?t=1103399
It`s very important that you read the instructions there on how to Root your phone.
It´s a great method because it gives you Root and Clockworkmod in one package and you will keep your stock Kernel.
After that you can install any Rom or Kernel you want but it`s highly recomended to not install any Kernel with the Hard Brick Bug. Read this thread for more information:
http://forum.xda-developers.com/showthread.php?t=1756242
If you really want to remove the triangle there is a mod from chainfire, called TriangleAway: http://forum.xda-developers.com/showthread.php?t=1494114
but I would recommend not to do it, since people also managed to screw that up (bricking their phone), I mean is it really so disturbing to see the Triangle for 2 seconds everytime you reboot?
Good Luck

[Q] touch screen doesn't work after rooting

hello guys..im newbie i frankly im try to root my s3..im on official jb 4.1.2 and xxema2,and because of this im use tutorial from ibtimes site to root .so after i click start,the odin said removed,so i think it ask me toremove the device so then i remove the device..(idiot me right?)..then after the phone turn on,it show the message"samsung galaxy, welcome, and select language, and about accesibility and also there is a next button..but when i touch the next button,it dosnt work...only physical button work(v+,V-,power,home,option)...
please guys help me..im dying right noww
khairulpetrcech said:
hello guys..im newbie i frankly im try to root my s3..im on official jb 4.1.2 and xxema2,and because of this im use tutorial from ibtimes site to root .so after i click start,the odin said removed,so i think it ask me toremove the device so then i remove the device..(idiot me right?)..then after the phone turn on,it show the message"samsung galaxy, welcome, and select language, and about accesibility and also there is a next button..but when i touch the next button,it dosnt work...only physical button work(v+,V-,power,home,option)...
please guys help me..im dying right noww
Click to expand...
Click to collapse
Flash the rom again with Odin.
Sent from my Nexus 7 using xda premium
Correct s3 ???
khairulpetrcech said:
hello guys..im newbie i frankly im try to root my s3..im on official jb 4.1.2 and xxema2,and because of this im use tutorial from ibtimes site to root .so after i click start,the odin said removed,so i think it ask me toremove the device so then i remove the device..(idiot me right?)..then after the phone turn on,it show the message"samsung galaxy, welcome, and select language, and about accesibility and also there is a next button..but when i touch the next button,it dosnt work...only physical button work(v+,V-,power,home,option)...
please guys help me..im dying right noww
Click to expand...
Click to collapse
Flash again - but be 100% certain the ROM you are using is for the precise version of S3 that you have!
because of this im use tutorial from ibtimes
Either ask that site what's wrong or use XDA methods to root .
jje
JJEgan said:
because of this im use tutorial from ibtimes
Either ask that site what's wrong or use XDA methods to root .
jje
Click to expand...
Click to collapse
Everyone seems to come to xda when in trouble.
Sent from my Nexus 7 using xda premium
kofiaa said:
Everyone seems to come to xda when in trouble.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Unfortunately after trying a method that we know nothing about that is often copied from XDA but missing vital facts .
jje
source of the problem found
ok guys, i think i know why the touchscreen doesnt work(maybe?).its because i use CF autoroot for gtn7100(obviously its galaxy note).so i've already download the gt19300 CF autoroot and i'm going to root again ...please pray that its work guys...im soooo dying because im not rich,,so i need to work really hard to get this phone,,so when this rooting process goes wrong,, only God know how panic i am ..
khairulpetrcech said:
ok guys, i think i know why the touchscreen doesnt work(maybe?).its because i use CF autoroot for gtn7100(obviously its galaxy note).so i've already download the gt19300 CF autoroot and i'm going to root again ...please pray that its work guys...im soooo dying because im not rich,,so i need to work really hard to get this phone,,so when this rooting process goes wrong,, only God know how panic i am ..
Click to expand...
Click to collapse
Does not happen if you read and understand first .
jje
nope .. its still not working..
khairulpetrcech said:
nope .. its still not working..
Click to expand...
Click to collapse
Looks like a paid for repair .
But first just try flashing stock firmware via Odin .
jje
khairulpetrcech said:
ok guys, i think i know why the touchscreen doesnt work(maybe?).its because i use CF autoroot for gtn7100(obviously its galaxy note).so i've already download the gt19300 CF autoroot and i'm going to root again ...please pray that its work guys...im soooo dying because im not rich,,so i need to work really hard to get this phone,,so when this rooting process goes wrong,, only God know how panic i am ..
Click to expand...
Click to collapse
do you still have warranty on your phone?
if it has, follow this guide so that you dont have to pay any fee
1. flash stock firmware and root it
2. after rebooted connect usb otg cable with usb mouse attach to it so you can navigate the screen on your phone.
3. install triangleaway and reset the binary counter on download mode.
4. after resetting the binary to no or 0, unroot your phone using supersu.apk and uninstall triangleaway
5. after unroot factory reset your phone.
6. you have to use again the usb otg to pass the welcome screen after factory reset
7. you are now ready go to the shop and claim warranty.
chris151722 said:
do you still have warranty on your phone?
if it has, follow this guide so that you dont have to pay any fee
1. flash stock firmware and root it
2. after rebooted connect usb otg cable with usb mouse attach to it so you can navigate the screen on your phone.
3. install triangleaway and reset the binary counter on download mode.
4. after resetting the binary to no or 0, unroot your phone using supersu.apk and uninstall triangleaway
5. after unroot factory reset your phone.
6. you have to use again the usb otg to pass the welcome screen after factory reset
7. you are now ready go to the shop and claim warranty.
Click to expand...
Click to collapse
at the download mode,,below the binary counter,,there about current binary and system status, it need to be samsung official and official,right?.
and also the binary counter must be 0..only then i can send it to samsung centre right?
khairulpetrcech said:
at the download mode,,below the binary counter,,there about current binary and system status, it need to be samsung official and official,right?.
and also the binary counter must be 0..only then i can send it to samsung centre right?
Click to expand...
Click to collapse
Absolutely if in case you have binary counter to 0 and samsung status to custom, just flash stock firmware again
your awesome !
chris151722 said:
Absolutely if in case you have binary counter to 0 and samsung status to custom, just flash stock firmware again
Click to expand...
Click to collapse
its working ! now im on my way to claim the precious warranty...thank you very much,,i dont know how to really thank you,,except...well THANK YOU ...you really made somebody day ... thank you very much wish u a good day
khairulpetrcech said:
its working ! now im on my way to claim the precious warranty...thank you very much,,i dont know how to really thank you,,except...well THANK YOU ...you really made somebody day ... thank you very much wish u a good day
Click to expand...
Click to collapse
:good: glad i have help you out..
chris151722 said:
:good: glad i have help you out..
Click to expand...
Click to collapse
one more question ,though..if the phone has been repaired using the warranty,and after it finished repaired,do the warranty still exist ?
khairulpetrcech said:
one more question ,though..if the phone has been repaired using the warranty,and after it finished repaired,do the warranty still exist ?
Click to expand...
Click to collapse
Yes within the 2years warranty period..
khairulpetrcech said:
hello guys..im newbie i frankly im try to root my s3..im on official jb 4.1.2 and xxema2,and because of this im use tutorial from ibtimes site to root .so after i click start,the odin said removed,so i think it ask me toremove the device so then i remove the device..(idiot me right?)..then after the phone turn on,it show the message"samsung galaxy, welcome, and select language, and about accesibility and also there is a next button..but when i touch the next button,it dosnt work...only physical button work(v+,V-,power,home,option)...
please guys help me..im dying right noww
Click to expand...
Click to collapse
So nobody solve this problem yet?
Ok i had this problem days ago, unfortunately after putting the wrong file for rooting, the touchscreen doesnt work at startup screen.. This is harfware problwm u have to change the lcd and difitizer... Hard to believe but its true after wrong rooting seen blue flicking, i think it damages the chips oh well it made my pocket burn replacing one lol.
I finally get back my charming s3 with the warranty claim! Tq very much chris.
Ironically,i ask my friend about my phone problem,he say that its not about the hardware damage,but software,specifically,kernel.he said that i can just flash stock firmware through kies (not odin) to get thing back normal again.i did not do this method coz i already got my repaired s3.. so anyone encounter this problem maybe should try the method,perhaps?
Sent from my GT-I9300 using xda premium
khairulpetrcech said:
I finally get back my charming s3 with the warranty claim! Tq very much chris.
Ironically,i ask my friend about my phone problem,he say that its not about the hardware damage,but software,specifically,kernel.he said that i can just flash stock firmware through kies (not odin) to get thing back normal again.i did not do this method coz i already got my repaired s3.. so anyone encounter this problem maybe should try the method,perhaps?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
yes try the kies method first before sending for repair.
but i dont think it will solve by kies update if you got the brick by flashing wrong cfautoroot.
maybe if you got the brick from flashing rom maybe it can be fix,
---------- Post added at 07:15 PM ---------- Previous post was at 07:08 PM ----------
t3chjunkie said:
So nobody solve this problem yet?
Ok i had this problem days ago, unfortunately after putting the wrong file for rooting, the touchscreen doesnt work at startup screen.. This is harfware problwm u have to change the lcd and difitizer... Hard to believe but its true after wrong rooting seen blue flicking, i think it damages the chips oh well it made my pocket burn replacing one lol.
Click to expand...
Click to collapse
you dont have warranty on your phone? if you have, you dont have to pay for service repair for it in claiming warranty.

[Q] Please HELP ME!!!!I bricked my e210k korean S3

I am seeking the pit file of e210k. Since my touchscreen is no response after I use triangle away to reset flash counter. Please help me to solve this problem. My s3 is vital for me!!!!!
jack0662 said:
I am seeking the pit file of e210k. Since my touchscreen is no response after I use triangle away to reset flash counter. Please help me to solve this problem. My s3 is vital for me!!!!!
Click to expand...
Click to collapse
One the Korean thread two try sammobile .com three Google .
jje
e210k
JJEgan said:
One the Korean thread two try sammobile .com three Google .
jje
Click to expand...
Click to collapse
Do u have solution????
jack0662 said:
Do u have solution????
Click to expand...
Click to collapse
As posted if you cannot use Google Sammobile or Korean thread then no solution .
jje
jack0662 said:
I am seeking the pit file of e210k. Since my touchscreen is no response after I use triangle away to reset flash counter. Please help me to solve this problem. My s3 is vital for me!!!!!
Click to expand...
Click to collapse
i brick my touch 2 times
first in triangleaway 2.36 then send it to warranty n they replaced the whole screen.
second flashing wrong recovery (SHV-E250K = korean note 2) with my SHV-E210K s3, im confused here so my mistake. and send again for screen replacement.
its an issue with triangleaway with version 2.36 and up resetting it will result in hardware brick( touchscreen)so even u use pit file its no use. the only solution is to send it for warranty. but before sending it be sure to reset your counter by using usb otg and mouse to be able to navigate the screen and use triangleaway 2.26 to reset the counter.
here is the guide to reset your counter, this surely help you to claim warranty
http://forum.xda-developers.com/showthread.php?t=2145908&page=2
Can you enter download mode?
Sent from my GT-I9300 using xda premium
My s3 touchscreen has no reponse!
Nick Fury said:
Can you enter download mode?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I can go to download mode. But I am seeking the alternative method beside sent to warrntly.
As long as you can enter download mode then you can flash the stock official firmware through odin and it will sort your problem out my friend
Sent from my GT-I9300 using xda premium
Nick Fury said:
As long as you can enter download mode then you can flash the stock official firmware through odin and it will sort your problem out my friend
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
flashing it with triangle away 2.36 or flashing wrong kernel or recovery( note/note2 ) to your e210k s3 will definitely broke your touch hardware
others and i already tried that with no luck but you can try what he suggest to find out, unfortunately your hardware already died you dont have any option but to replace it by yourself or go to warranty.
Shall I take to to samsung??
chris151722 said:
i brick my touch 2 times
first in triangleaway 2.36 then send it to warranty n they replaced the whole screen.
second flashing wrong recovery (SHV-E250K = korean note 2) with my SHV-E210K s3, im confused here so my mistake. and send again for screen replacement.
its an issue with triangleaway with version 2.36 and up resetting it will result in hardware brick( touchscreen)so even u use pit file its no use. the only solution is to send it for warranty. but before sending it be sure to reset your counter by using usb otg and mouse to be able to navigate the screen and use triangleaway 2.26 to reset the counter.
here is the guide to reset your counter, this surely help you to claim warranty
http://forum.xda-developers.com/showthread.php?t=2145908&page=2
Click to expand...
Click to collapse
Mine is korean version(Parallel import) and I am in Hong Kong! Can I take it to SAMSUNG (HK) to get further repair??
jack0662 said:
Mine is korean version(Parallel import) and I am in Hong Kong! Can I take it to SAMSUNG (HK) to get further repair??
Click to expand...
Click to collapse
i dont know maybe you call them first if your korean s3 is covered in your country or call the store where you bought your phone.
chris151722 said:
i dont know maybe you call them first if your korean s3 is covered in your country or call the store where you bought your phone.
Click to expand...
Click to collapse
No Samsung will only repair korean variants in korea.
Also, the touchscreen is pretty much done. The note2 kernel has a higher voltage for the touch controller and it's too high for the S3. iirc anyways.
The same thing happaned to Erica one of the XDA tv guys :3
xSpeced said:
No Samsung will only repair korean variants in korea.
Also, the touchscreen is pretty much done. The note2 kernel has a higher voltage for the touch controller and it's too high for the S3. iirc anyways.
The same thing happaned to Erica one of the XDA tv guys :3
Click to expand...
Click to collapse
yes i think you are right cos the size of the screen of note/2 is bigger compare to s3 thats why it needs higher voltage and this causes the failing of touch hardwares.
I got a good news! I take it to the seller they said they have two method to solve this problem. First is change the monitor but it expense ($1800HKD), another is change the bus of the LCD it cost 800HKD (100USD). Obviously, i choose second method!

Categories

Resources