[Q] Please HELP ME!!!!I bricked my e210k korean S3 - Galaxy S III Q&A, Help & Troubleshooting

I am seeking the pit file of e210k. Since my touchscreen is no response after I use triangle away to reset flash counter. Please help me to solve this problem. My s3 is vital for me!!!!!

jack0662 said:
I am seeking the pit file of e210k. Since my touchscreen is no response after I use triangle away to reset flash counter. Please help me to solve this problem. My s3 is vital for me!!!!!
Click to expand...
Click to collapse
One the Korean thread two try sammobile .com three Google .
jje

e210k
JJEgan said:
One the Korean thread two try sammobile .com three Google .
jje
Click to expand...
Click to collapse
Do u have solution????

jack0662 said:
Do u have solution????
Click to expand...
Click to collapse
As posted if you cannot use Google Sammobile or Korean thread then no solution .
jje

jack0662 said:
I am seeking the pit file of e210k. Since my touchscreen is no response after I use triangle away to reset flash counter. Please help me to solve this problem. My s3 is vital for me!!!!!
Click to expand...
Click to collapse
i brick my touch 2 times
first in triangleaway 2.36 then send it to warranty n they replaced the whole screen.
second flashing wrong recovery (SHV-E250K = korean note 2) with my SHV-E210K s3, im confused here so my mistake. and send again for screen replacement.
its an issue with triangleaway with version 2.36 and up resetting it will result in hardware brick( touchscreen)so even u use pit file its no use. the only solution is to send it for warranty. but before sending it be sure to reset your counter by using usb otg and mouse to be able to navigate the screen and use triangleaway 2.26 to reset the counter.
here is the guide to reset your counter, this surely help you to claim warranty
http://forum.xda-developers.com/showthread.php?t=2145908&page=2

Can you enter download mode?
Sent from my GT-I9300 using xda premium

My s3 touchscreen has no reponse!
Nick Fury said:
Can you enter download mode?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I can go to download mode. But I am seeking the alternative method beside sent to warrntly.

As long as you can enter download mode then you can flash the stock official firmware through odin and it will sort your problem out my friend
Sent from my GT-I9300 using xda premium

Nick Fury said:
As long as you can enter download mode then you can flash the stock official firmware through odin and it will sort your problem out my friend
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
flashing it with triangle away 2.36 or flashing wrong kernel or recovery( note/note2 ) to your e210k s3 will definitely broke your touch hardware
others and i already tried that with no luck but you can try what he suggest to find out, unfortunately your hardware already died you dont have any option but to replace it by yourself or go to warranty.

Shall I take to to samsung??
chris151722 said:
i brick my touch 2 times
first in triangleaway 2.36 then send it to warranty n they replaced the whole screen.
second flashing wrong recovery (SHV-E250K = korean note 2) with my SHV-E210K s3, im confused here so my mistake. and send again for screen replacement.
its an issue with triangleaway with version 2.36 and up resetting it will result in hardware brick( touchscreen)so even u use pit file its no use. the only solution is to send it for warranty. but before sending it be sure to reset your counter by using usb otg and mouse to be able to navigate the screen and use triangleaway 2.26 to reset the counter.
here is the guide to reset your counter, this surely help you to claim warranty
http://forum.xda-developers.com/showthread.php?t=2145908&page=2
Click to expand...
Click to collapse
Mine is korean version(Parallel import) and I am in Hong Kong! Can I take it to SAMSUNG (HK) to get further repair??

jack0662 said:
Mine is korean version(Parallel import) and I am in Hong Kong! Can I take it to SAMSUNG (HK) to get further repair??
Click to expand...
Click to collapse
i dont know maybe you call them first if your korean s3 is covered in your country or call the store where you bought your phone.

chris151722 said:
i dont know maybe you call them first if your korean s3 is covered in your country or call the store where you bought your phone.
Click to expand...
Click to collapse
No Samsung will only repair korean variants in korea.
Also, the touchscreen is pretty much done. The note2 kernel has a higher voltage for the touch controller and it's too high for the S3. iirc anyways.
The same thing happaned to Erica one of the XDA tv guys :3

xSpeced said:
No Samsung will only repair korean variants in korea.
Also, the touchscreen is pretty much done. The note2 kernel has a higher voltage for the touch controller and it's too high for the S3. iirc anyways.
The same thing happaned to Erica one of the XDA tv guys :3
Click to expand...
Click to collapse
yes i think you are right cos the size of the screen of note/2 is bigger compare to s3 thats why it needs higher voltage and this causes the failing of touch hardwares.

I got a good news! I take it to the seller they said they have two method to solve this problem. First is change the monitor but it expense ($1800HKD), another is change the bus of the LCD it cost 800HKD (100USD). Obviously, i choose second method!

Related

[Q] Custom binary count reset

Hi there Galaxy s2 owners
I was woundering ive had the galaxy s2 for a few days now and recently i flashed chains unsecure kernel, now the thing i noticed is that every time u flash somthing that count goes up. Does any of you Devs know how to reset this counter if so all help would be greatly recieved.
BRONSON29 said:
Hi there Galaxy s2 owners
I was woundering ive had the galaxy s2 for a few days now and recently i flashed chains unsecure kernel, now the thing i noticed is that every time u flash somthing that count goes up. Does any of you Devs know how to reset this counter if so all help would be greatly recieved.
Click to expand...
Click to collapse
solution found by me ur post showed up when I was posting my thread.
look here
dh2311 said:
solution found by me ur post showed up when I was posting my thread.
look here
Click to expand...
Click to collapse
Thanks a lot for this info
can someone explain why the counter going up is a bad thing?
Sandwiches said:
can someone explain why the counter going up is a bad thing?
Click to expand...
Click to collapse
It is not a bad thing, if you have no problems with your phone.
You can ignore the counting, but if you have a problem and need warranty service from Samsung, they will charge you for the repair as flashing or changing the firmware other then through official means i.e. kies, your warranty is considered null and void.
Phone repairs can sometimes be expensive.
On latest 2.3.4 USB jig will not reset the counter .
jje
JJEgan said:
On latest 2.3.4 USB jig will not reset the counter .
jje
Click to expand...
Click to collapse
I reset my 2.3.5 counter this evening with a USB jig
luster said:
I reset my 2.3.5 counter this evening with a USB jig
Click to expand...
Click to collapse
2.3.5 ???????????????????
jje
JJEgan said:
On latest 2.3.4 USB jig will not reset the counter .
jje
Click to expand...
Click to collapse
Only in the Official 2.3.5 KI Firmwares are fixed.
http://www.xda-developers.com/android/no-more-usb-host-api-support-on-ki-firmware/
m0ngstr0us said:
Only in the Official 2.3.5 KI Firmwares are fixed.
http://www.xda-developers.com/android/no-more-usb-host-api-support-on-ki-firmware/
Click to expand...
Click to collapse
Thanks a misprint .
jje
luster said:
I reset my 2.3.5 counter this evening with a USB jig
Click to expand...
Click to collapse
Yes, many people have done this because they know which package to use.
JJEgan said:
On latest 2.3.4 USB jig will not reset the counter .
jje
Click to expand...
Click to collapse
It will if you use the firmwares from XDA OR use the workaround that we provide.
So there is no way to reset the counter when using the new bootloader yet, not even flashing through the jig (tried that, counter still up)?
Can any one tell me what is the exact specification of the resistance to make a jig . I have searched ebay it cost around 400k whereas i made the jig only for 12 rs . Its not working , i think there must be something wrong with the resistance rating .
Btw i used 2 ,150 ohm connected in series to another 1 ohm. The phone instead of going to dnld mode it boots to the main OS
Sent from my GT-I9100 using Tapatalk
motodude said:
Can any one tell me what is the exact specification of the resistance to make a jig . I have searched ebay it cost around 400k whereas i made the jig only for 12 rs . Its not working , i think there must be something wrong with the resistance rating .
Btw i used 2 ,150 ohm connected in series to another 1 ohm. The phone instead of going to dnld mode it boots to the main OS
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Hi motodude!
300k Ohm bettween 4 and 5 pins.
d3l1 said:
So there is no way to reset the counter when using the new bootloader yet, not even flashing through the jig (tried that, counter still up)?
Click to expand...
Click to collapse
Download the old bootloader from intratechs original firmware thread and flash with Odin. A few posts in from beginning of thread and available to download by itself.
Then you can use the jig.
Sent from my GT-I9100 using XDA App
aceofclubs said:
Download the old bootloader from intratechs original firmware thread and flash with Odin. A few posts in from beginning of thread and available to download by itself.
Then you can use the jig.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
I have tried this multiple times and i cant get it to work. I know the jig has worked in the past. is it possible that it has stopped working? or a way to confirm i am using an old bootloader?
Why it is so important to reset the count besides voiding the warranty?
Is the phone going to stop functioning after reaching xx number or is there a maximum number?
Sent from my GT-I9100G using Tapatalk
wcg707 said:
Why it is so important to reset the count besides voiding the warranty?
Is the phone going to stop functioning after reaching xx number or is there a maximum number?
Sent from my GT-I9100G using Tapatalk
Click to expand...
Click to collapse
i dont think there is a limit. i think everyone just assumes there isnt.
I just want to be able to reset mine to 0 just in case i do have problems. atm i cant and would like to do it before i break it (i break lots of things)
Guys, try searching the site a little more.
install the insecure kernel with cwm you want
extract the zimage from this dump it on your internal sd
flash the stock kernel version back over it using odin (resets counter)
reboot to cwm and flash the zimage from within cwm no more counter / triangle
curioct said:
Guys, try searching the site a little more.
<snip>
reboot to cwm and flash the zimage from within cwm no more counter / triangle
Click to expand...
Click to collapse
Maybe it should be you searching the site a little more, as that will most certainly not reset the counter.

[Solved] help with a soft-bricked phone ((urgently))

Somebody help me with my issue
I was having RR ROM with Siyah 3.3.3b Kernel and the secondary boot is port JB
I was on the secondary boot and I was restarting I found that the device is crashed
I thought it’s the kernel so I booted the phone to the download mood and flashed a kernel again and its not working also
I tried to add new software from Odin and it was giving me errors like | failed to mount emmc
I searched the internet and by mistake I flashed the device with i9100G PIT files and I re-partitioned the device and also I flashed a new boot loader not only this but also during the flashing process my pc crashed and it restarts leaving my device with no life
I can’t even turn the device on or go to download mood or anything the only thing that let me have a faith that the mobile is still a live that its getting heat while the battery is plugged in
Anyone can help with this?
Hard Brick?
As far a I know flashing a wrong bootloader hard-bricks your phone. the bootloader is what loads first, ans then in turn loads the rest of the system. if your bootloader is broken, it will neither load recovery, DL-Mode nor the system. maybe you can find a solution to this by searching for wrong bootloader or anything of the sort.
if everything fails you would need to get a new motherboard or whatever it is called in an android phone. there are guides in this forum on this, I once used this one: http://forum.xda-developers.com/showthread.php?t=1253969 althogh the photos only seem to work with the old xda2010 theme.
I hope it is not what it looks like and you get your phone up and ruing again.
Bootloader had nothing to do with what went wrong for him. He flashed an I9100G pit file to an I9100.
OP, unfortunately there's nothing you can do at this point short of JTag service, or visiting/sending the phone to a Samsung service center.
find a repair center that preforms jtag near you, it should cost you about 40$
Coirpre said:
As far a I know flashing a wrong bootloader hard-bricks your phone. the bootloader is what loads first, ans then in turn loads the rest of the system. if your bootloader is broken, it will neither load recovery, DL-Mode nor the system. maybe you can find a solution to this by searching for wrong bootloader or anything of the sort.
if everything fails you would need to get a new motherboard or whatever it is called in an android phone. there are guides in this forum on this, I once used this one: http://forum.xda-developers.com/showthread.php?t=1253969 althogh the photos only seem to work with the old xda2010 theme.
I hope it is not what it looks like and you get your phone up and ruing again.
Click to expand...
Click to collapse
thanks for the reply but let me tell you that it has nothing to do with my boot loader I just flashed wrong PIT file
ctomgee said:
Bootloader had nothing to do with what went wrong for him. He flashed an I9100G pit file to an I9100.
OP, unfortunately there's nothing you can do at this point short of JTag service, or visiting/sending the phone to a Samsung service center.
Click to expand...
Click to collapse
remorema said:
find a repair center that preforms jtag near you, it should cost you about 40$
Click to expand...
Click to collapse
am living in Egypt we don't have Jtag services .. i saw what they can make on you-tube and am still in warranty so i don't know what to do should i pass it by the warranty should they let me pay or it will be free ?
From what i've read on this forum its better if you try to send it to samsung for warranty your chances to get it repaired is 50/50 just play dump you have nothing to loose
thanks guys for your reply i think i made an issue with the MB BOIS firmware hence it has to be hard flashed in the warranty so am scheduling the same on next Friday i hope that they will not ask for money as it was on a custom ROM
because here in Egypt Warranty is make fool of us and they always take much money to fix noob issues so guess what they can do regarding mine.
I've got my device from the warranty , its working fine now .. i need to inform you that Warranty in Egypt confirmed that flashing custom ROMs is not voiding the Warranty its just black listing the device in their records .
They are flashing boot loaders smoothly.
Sent from my GT-I9100 using xda premium
moe.nassef said:
I've got my device from the warranty , its working fine now .. i need to inform you that Warranty in Egypt confirmed that flashing custom ROMs is not voiding the Warranty its just black listing the device in their records .
They are flashing boot loaders smoothly.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
u r lucky
its not the same case as evrywhr arnd .. may got the warranty void
i know am lucky lool if any body ia facing the same he/she can ship the device to Egypt and it will get the correct treatment lol
Am proud to have this kind of Samsung store in Egypt
Sent from my GT-I9100 using xda premium
moe.nassef said:
i know am lucky lool if any body ia facing the same he/she can ship the device to egypt and it will get the correct treatment lol
am proud to have this kind of samsung store in egypt
sent from my gt-i9100 using xda premium
Click to expand...
Click to collapse
haha i wish samsung gave international warranrty
neerajganga said:
haha i wish samsung gave international warranrty
Click to expand...
Click to collapse
I'd like to thank you rele for your support in my issue from the beginning.
Sent from my GT-I9100 using xda premium
moe.nassef said:
I'd like to thank you rele for your support in my issue from the beginning.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
haha
cheers mate
glad that ur warranty is not void and u got it fixed
Cheers..!!!

Cant Turn on Samsung galaxy s2 after failing at rooting

PLEASE Help i cant turn on my samsung after rooting it ( its my dads and he would get really angry if he would get out that i messed up his phone guys please help :crying:, i was rooting my phone with odin, and after a while i thought it crashed so i turned my phone off, and after that i cant turn it on again!
I cant do anything there is just a black screen
guys plase help!!!
kristofer_gvenetadze said:
PLEASE Help i cant turn on my samsung after rooting it ( its my dads and he would get really angry if he would get out that i messed up his phone guys please help :crying:, i was rooting my phone with odin, and after a while i thought it crashed so i turned my phone off, and after that i cant turn it on again!
I cant do anything there is just a black screen
guys plase help!!!
Click to expand...
Click to collapse
Sorry about that.
Please provide answers to the following questions:
1. What's the model no. Of your galaxy SII?
2. What were you trying to flash too gain root access? please provide the link to where you find it.
3. Can you still get to download mode?
Swyped from my Samsung Galaxy SII
Replyy
Jokesy said:
Sorry about that.
Please provide answers to the following questions:
1. What's the model no. Of your galaxy SII?
2. What were you trying to flash too gain root access? please provide the link to where you find it.
3. Can you still get to download mode?
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
my model number is GT-I9100, nothing happens when i push the power button, nor then i connect it to a charger.
kristofer_gvenetadze said:
my model number is GT-I9100, nothing happens when i push the power button, nor then i connect it to a charger.
Click to expand...
Click to collapse
What about other answers?
Swyped from my Samsung Galaxy SII
Reply
Jokesy said:
What about other answers?
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
it is an outside link i cant post it here ( it s called "Android 2.3.6 JVU + Root"
JVU is for i9000 not 9100.
You have bricked this phone by flashing inproper firmware with bootloader dedicated for olde model.
i9.0.1.3k galaxy imperator
Can you get into recovery or download mode.Take out the battery for 5 minutes and/or charge the phone for a bit and retry.
ps. your fathers not going to be happy
Sent from my GT-I9100 using xda premium
Reply
theunderling said:
Can you get into recovery or download mode.Take out the battery for 5 minutes and/or charge the phone for a bit and retry.
ps. your fathers not going to be happy
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
i cant turn it on nothing happens when i push the power button as i said, so No download mode no recovery mode for me.
Thx
SirKunon said:
JVU is for i9000 not 9100.
You have bricked this phone by flashing inproper firmware with bootloader dedicated for olde model.
i9.0.1.3k galaxy imperator
Click to expand...
Click to collapse
Thx for letting me know, but what should i do now, i cant turn it even on, nothing happens when i push the power button
kristofer_gvenetadze said:
Thx for letting me know, but what should i do now, i cant turn it even on, nothing happens when i push the power button
Click to expand...
Click to collapse
Plead ignorance and send it in for warranty repair. I hard bricked my SGS2 last week and it was repaired under warranty, no questions asked. If the repairers can't turn it on they can't tell you voided the warranty and they will just replace the motherboard. In Australia it takes 5 -10 working days.
If it is out of warranty there is a place in the US that claims to be able to repair a hard bricked SGS2, google is your friend.
Additional Info
kapioonda said:
Plead ignorance and send it in for warranty repair. I hard bricked my SGS2 last week and it was repaired under warranty, no questions asked. If the repairers can't turn it on they can't tell you voided the warranty and they will just replace the motherboard. In Australia it takes 5 -10 working days.
If it is out of warranty there is a place in the US that claims to be able to repair a hard bricked SGS2, google is your friend.
Click to expand...
Click to collapse
Isn´t there any other way solving this problem cuz currently i am in Georgia and there is no Samsung Center?
Search for jtag in your country... That will fix a hard brick
Sent from my SGH-I897 using Tapatalk 2
spagman72 said:
Search for jtag in your country... That will fix a hard brick
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
is that someonekind of a programm?
sry i am new to rooting android phones
kristofer_gvenetadze said:
is that someonekind of a programm?
sry i am new to rooting android phones
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1192853

[Q] Friends SII problem

My friends SII will not switch on any more, when he tries someone else's battery it gets to the SII boot screen then loops.
It is not rooted, when I press down + home + power it takes me to a screen that says:
Product name: gt-i9100
Custom binary download: no
Current binary: Samsung official
I'm an SI owner so not sure what to tell him or how to help. Any ideas?
From your incredibly detailed and useful post outlining the problem I can tell you with absolute certainty that one of the cores on your friend phone has failed. Take it back to the core store and ask them for a new one.
Anybody who isn't a tw** willing to help?
If its not rooted its most probably a hardware issue. Just get it back to Samsung.
Sent from my potato running a potato.
When you press down home n powr... its in download mode. Excellent- now just use ODIN to flash a rom! Done. But be careful to flash the correct ROM for i9100...
That "screen" which you're talkong about is called download mode.
Sent from my GT-I9100 using xda premium
preseodymium said:
If its not rooted its most probably a hardware issue. Just get it back to Samsung.
Sent from my potato running a potato.
Click to expand...
Click to collapse
^^
This.
If the phone has never been rooted/run non-stock firmware & still has warranty, why would you do something completely stupid like trying to flash a rom of any description when the flash could end up trashing the warranty ?
You've been given good advice, heed it.
I've just checked with him. The phone is outside of warranty, so he is willing to root and flash it with a ROM if necessary.
Should I be looking at flashing it with a rooted kernel and then a ROM?
MistahBungle said:
^^
This.
If the phone has never been rooted/run non-stock firmware & still has warranty, why would you do something completely stupid like trying to flash a rom of any description when the flash could end up trashing the warranty ?
You've been given good advice, heed it.
Click to expand...
Click to collapse
Even if you flash stock rom via odin it will not void his warranty since binary counter will not increase... And anyway his warranty is no more he can take a chance...
Go to sammobile.com and download stock rom for your country... Make sure the version of your mobile... viz GT I9100 OR GT I9100G..
Download and flash via odin... Let us know
Sent from my GT-I9100 using xda premium
xDa_nightfury said:
Even if you flash stock rom via odin it will not void his warranty since binary counter will not increase... And anyway his warranty is no more he can take a chance...
Go to sammobile.com and download stock rom for your country... Make sure the version of your mobile... viz GT I9100 OR GT I9100G..
Download and flash via odin... Let us know
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Thanks for your help, I'll tell him. Don't know if he'll be able to do it himself, so I might have to read up and then flash it when I have some time.

[Q] touch screen doesn't work after rooting

hello guys..im newbie i frankly im try to root my s3..im on official jb 4.1.2 and xxema2,and because of this im use tutorial from ibtimes site to root .so after i click start,the odin said removed,so i think it ask me toremove the device so then i remove the device..(idiot me right?)..then after the phone turn on,it show the message"samsung galaxy, welcome, and select language, and about accesibility and also there is a next button..but when i touch the next button,it dosnt work...only physical button work(v+,V-,power,home,option)...
please guys help me..im dying right noww
khairulpetrcech said:
hello guys..im newbie i frankly im try to root my s3..im on official jb 4.1.2 and xxema2,and because of this im use tutorial from ibtimes site to root .so after i click start,the odin said removed,so i think it ask me toremove the device so then i remove the device..(idiot me right?)..then after the phone turn on,it show the message"samsung galaxy, welcome, and select language, and about accesibility and also there is a next button..but when i touch the next button,it dosnt work...only physical button work(v+,V-,power,home,option)...
please guys help me..im dying right noww
Click to expand...
Click to collapse
Flash the rom again with Odin.
Sent from my Nexus 7 using xda premium
Correct s3 ???
khairulpetrcech said:
hello guys..im newbie i frankly im try to root my s3..im on official jb 4.1.2 and xxema2,and because of this im use tutorial from ibtimes site to root .so after i click start,the odin said removed,so i think it ask me toremove the device so then i remove the device..(idiot me right?)..then after the phone turn on,it show the message"samsung galaxy, welcome, and select language, and about accesibility and also there is a next button..but when i touch the next button,it dosnt work...only physical button work(v+,V-,power,home,option)...
please guys help me..im dying right noww
Click to expand...
Click to collapse
Flash again - but be 100% certain the ROM you are using is for the precise version of S3 that you have!
because of this im use tutorial from ibtimes
Either ask that site what's wrong or use XDA methods to root .
jje
JJEgan said:
because of this im use tutorial from ibtimes
Either ask that site what's wrong or use XDA methods to root .
jje
Click to expand...
Click to collapse
Everyone seems to come to xda when in trouble.
Sent from my Nexus 7 using xda premium
kofiaa said:
Everyone seems to come to xda when in trouble.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Unfortunately after trying a method that we know nothing about that is often copied from XDA but missing vital facts .
jje
source of the problem found
ok guys, i think i know why the touchscreen doesnt work(maybe?).its because i use CF autoroot for gtn7100(obviously its galaxy note).so i've already download the gt19300 CF autoroot and i'm going to root again ...please pray that its work guys...im soooo dying because im not rich,,so i need to work really hard to get this phone,,so when this rooting process goes wrong,, only God know how panic i am ..
khairulpetrcech said:
ok guys, i think i know why the touchscreen doesnt work(maybe?).its because i use CF autoroot for gtn7100(obviously its galaxy note).so i've already download the gt19300 CF autoroot and i'm going to root again ...please pray that its work guys...im soooo dying because im not rich,,so i need to work really hard to get this phone,,so when this rooting process goes wrong,, only God know how panic i am ..
Click to expand...
Click to collapse
Does not happen if you read and understand first .
jje
nope .. its still not working..
khairulpetrcech said:
nope .. its still not working..
Click to expand...
Click to collapse
Looks like a paid for repair .
But first just try flashing stock firmware via Odin .
jje
khairulpetrcech said:
ok guys, i think i know why the touchscreen doesnt work(maybe?).its because i use CF autoroot for gtn7100(obviously its galaxy note).so i've already download the gt19300 CF autoroot and i'm going to root again ...please pray that its work guys...im soooo dying because im not rich,,so i need to work really hard to get this phone,,so when this rooting process goes wrong,, only God know how panic i am ..
Click to expand...
Click to collapse
do you still have warranty on your phone?
if it has, follow this guide so that you dont have to pay any fee
1. flash stock firmware and root it
2. after rebooted connect usb otg cable with usb mouse attach to it so you can navigate the screen on your phone.
3. install triangleaway and reset the binary counter on download mode.
4. after resetting the binary to no or 0, unroot your phone using supersu.apk and uninstall triangleaway
5. after unroot factory reset your phone.
6. you have to use again the usb otg to pass the welcome screen after factory reset
7. you are now ready go to the shop and claim warranty.
chris151722 said:
do you still have warranty on your phone?
if it has, follow this guide so that you dont have to pay any fee
1. flash stock firmware and root it
2. after rebooted connect usb otg cable with usb mouse attach to it so you can navigate the screen on your phone.
3. install triangleaway and reset the binary counter on download mode.
4. after resetting the binary to no or 0, unroot your phone using supersu.apk and uninstall triangleaway
5. after unroot factory reset your phone.
6. you have to use again the usb otg to pass the welcome screen after factory reset
7. you are now ready go to the shop and claim warranty.
Click to expand...
Click to collapse
at the download mode,,below the binary counter,,there about current binary and system status, it need to be samsung official and official,right?.
and also the binary counter must be 0..only then i can send it to samsung centre right?
khairulpetrcech said:
at the download mode,,below the binary counter,,there about current binary and system status, it need to be samsung official and official,right?.
and also the binary counter must be 0..only then i can send it to samsung centre right?
Click to expand...
Click to collapse
Absolutely if in case you have binary counter to 0 and samsung status to custom, just flash stock firmware again
your awesome !
chris151722 said:
Absolutely if in case you have binary counter to 0 and samsung status to custom, just flash stock firmware again
Click to expand...
Click to collapse
its working ! now im on my way to claim the precious warranty...thank you very much,,i dont know how to really thank you,,except...well THANK YOU ...you really made somebody day ... thank you very much wish u a good day
khairulpetrcech said:
its working ! now im on my way to claim the precious warranty...thank you very much,,i dont know how to really thank you,,except...well THANK YOU ...you really made somebody day ... thank you very much wish u a good day
Click to expand...
Click to collapse
:good: glad i have help you out..
chris151722 said:
:good: glad i have help you out..
Click to expand...
Click to collapse
one more question ,though..if the phone has been repaired using the warranty,and after it finished repaired,do the warranty still exist ?
khairulpetrcech said:
one more question ,though..if the phone has been repaired using the warranty,and after it finished repaired,do the warranty still exist ?
Click to expand...
Click to collapse
Yes within the 2years warranty period..
khairulpetrcech said:
hello guys..im newbie i frankly im try to root my s3..im on official jb 4.1.2 and xxema2,and because of this im use tutorial from ibtimes site to root .so after i click start,the odin said removed,so i think it ask me toremove the device so then i remove the device..(idiot me right?)..then after the phone turn on,it show the message"samsung galaxy, welcome, and select language, and about accesibility and also there is a next button..but when i touch the next button,it dosnt work...only physical button work(v+,V-,power,home,option)...
please guys help me..im dying right noww
Click to expand...
Click to collapse
So nobody solve this problem yet?
Ok i had this problem days ago, unfortunately after putting the wrong file for rooting, the touchscreen doesnt work at startup screen.. This is harfware problwm u have to change the lcd and difitizer... Hard to believe but its true after wrong rooting seen blue flicking, i think it damages the chips oh well it made my pocket burn replacing one lol.
I finally get back my charming s3 with the warranty claim! Tq very much chris.
Ironically,i ask my friend about my phone problem,he say that its not about the hardware damage,but software,specifically,kernel.he said that i can just flash stock firmware through kies (not odin) to get thing back normal again.i did not do this method coz i already got my repaired s3.. so anyone encounter this problem maybe should try the method,perhaps?
Sent from my GT-I9300 using xda premium
khairulpetrcech said:
I finally get back my charming s3 with the warranty claim! Tq very much chris.
Ironically,i ask my friend about my phone problem,he say that its not about the hardware damage,but software,specifically,kernel.he said that i can just flash stock firmware through kies (not odin) to get thing back normal again.i did not do this method coz i already got my repaired s3.. so anyone encounter this problem maybe should try the method,perhaps?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
yes try the kies method first before sending for repair.
but i dont think it will solve by kies update if you got the brick by flashing wrong cfautoroot.
maybe if you got the brick from flashing rom maybe it can be fix,
---------- Post added at 07:15 PM ---------- Previous post was at 07:08 PM ----------
t3chjunkie said:
So nobody solve this problem yet?
Ok i had this problem days ago, unfortunately after putting the wrong file for rooting, the touchscreen doesnt work at startup screen.. This is harfware problwm u have to change the lcd and difitizer... Hard to believe but its true after wrong rooting seen blue flicking, i think it damages the chips oh well it made my pocket burn replacing one lol.
Click to expand...
Click to collapse
you dont have warranty on your phone? if you have, you dont have to pay for service repair for it in claiming warranty.

Categories

Resources