how install JB 4.1 on dead sgs 2? - Galaxy S II Q&A, Help & Troubleshooting

is there any way to install JB 4.1 on dead samsung galaxy sII i9100?

Probably the phone would have to be on in some form...........lol
Sent from my GT-I9100 using xda premium

eeamshh said:
is there any way to install JB 4.1 on dead samsung galaxy sII i9100?
Click to expand...
Click to collapse
What do you mean by dead?
Swyped from my Galaxy SII

theunderling said:
Probably the phone would have to be on in some form...........lol
Click to expand...
Click to collapse
oh that mean it's not possible

Jokesy said:
What do you mean by dead?
Click to expand...
Click to collapse
it mean > can't switch on the phone

eeamshh said:
it mean > can't switch on the phone
Click to expand...
Click to collapse
then it's not possible!
Swyped from my Galaxy SII

You have various options
Try to get it going
Send it for warranty
Pay for jtag or mb
Sell it for around £140 on ebay
You need to explain what happened for starters
Sent from my GT-I9100 using xda premium

If you connect it to a charger does it turn on?
And what happened before your s2 died?

gb.yolo said:
If you connect it to a charger does it turn on?
And what happened before your s2 died?
Click to expand...
Click to collapse
i got this msg unfortunately android keyboard (AOSP) has stopped.
then i take back up and then i try to reset phone when it shut down it not open(switch on).

Sounds like the a brick bug.
Can you get into download mode by holding:
vol down+ home button+ power button till phones shows boot logo for the second time then release power button while still holding vol down and home buttons.
If so you might be able to save your S2.

pepxl said:
Sounds like the a brick bug.
Can you get into download mode by holding:
vol down+ home button+ power button till phones shows boot logo for the second time then release power button while still holding vol down and home buttons.
If so you might be able to save your S2.
Click to expand...
Click to collapse
yes

eeamshh said:
yes
Click to expand...
Click to collapse
if u can enter dwnld mode then flash a stock ICS 4.0.3 firmware thro ODIN and see
u can dwnld Stock firmware from www.sammobile.com

Sun90 said:
if u can enter dwnld mode then flash a stock ICS 4.0.3 firmware thro ODIN and see
u can dwnld Stock firmware from www.sammobile.com
Click to expand...
Click to collapse
thank u so mush Sun90

Related

[Q] Iszit dead

Today,i flashed alot of roms and kernel but now my samsung galaxy s2 also dead i pressing volume down + power.................i see picture with phone on the left side , centre with the triangle and right side with computer..can anyone help
Dallenlim said:
Today,i flashed alot of roms and kernel but now my samsung galaxy s2 also dead i pressing volume down + power.................i see picture with phone on the left side , centre with the triangle and right side with computer..can anyone help
Click to expand...
Click to collapse
Pull out battery, wait a while, put battery back in, boot into download mode and flash firmware with Odin.
Intratech said:
Pull out battery, wait a while, put battery back in, boot into download mode and flash firmware with Odin.
Click to expand...
Click to collapse
also cannot..i try before plus now cannot reboot to recovery
Dallenlim said:
also cannot..i try before plus now cannot reboot to recovery
Click to expand...
Click to collapse
keep on restarting
You didn't accidentaly flash with .pit file?
Or maybe you flashed a ROM for SGS1?
If so, you might need a JTAG kit to unbrick it. There are some services that does it for you though.
Sent from my GT-I9100 using XDA Premium App
Today,i flashed alot of roms and kernel but now my samsung galaxy s2 also dead i pressing volume down + power..
Post traumatic multiple rom flashed syndrome i guess .
jje
JJEgan said:
Today,i flashed alot of roms and kernel but now my samsung galaxy s2 also dead i pressing volume down + power..
Post traumatic multiple rom flashed syndrome i guess .
jje
Click to expand...
Click to collapse
Just reflash to original firmware KF1 also cannot
Yo need to press volume down + power + home.Not two buttons but three.same goes for download mode.power+volume down+ home.You said you pushed only two keys.
You phone is not dead. It happened with me when I tried to update the firmware via Kies, Kies died mid-way giving me that screen.
Turn off the phone by pressing the power button for like 7-8 seconds, then start in download mode as stated above by pressing Volume Down + Home + Power key.
Get the firmware and flash it using Odin.

i9100g break

hi all .
i have a serious problem. i update my I9100G to ics and i stuck on Samsung logo.
and from the beginning i could not use 3 combo button to go ether in download mode or recovery mode.
can any one help me pleeeeeeeeeeeeeeeeaaaaaaaaaase!!!!!
jusper67 said:
hi all .
i have a serious problem. i update my I9100G to ics and i stuck on Samsung logo.
and from the beginning i could not use 3 combo button to go ether in download mode or recovery mode.
can any one help me pleeeeeeeeeeeeeeeeaaaaaaaaaase!!!!!
Click to expand...
Click to collapse
If you're 100% sure the three-button combo isn't working, try a USB Jig to get into download mode. From there, flash a stock ROM.
screamworks
screamworks said:
If you're 100% sure the three-button combo isn't working, try a USB Jig to get into download mode. From there, flash a stock ROM.
screamworks
Click to expand...
Click to collapse
thanx for replay.
yes i'm 100% sure and i make a USB jig myself and i'ts work fine for me.but the problem is what ever rom i flash it will stuck on Samsung logo.
any idea what can i do?
jusper67 said:
thanx for replay.
yes i'm 100% sure and i make a USB jig myself and i'ts work fine for me.but the problem is what ever rom i flash it will stuck on Samsung logo.
any idea what can i do?
Click to expand...
Click to collapse
please check the link below hope it will be of some help to u
http://forum.xda-developers.com/showthread.php?t=1457458
Sun90 said:
please check the link below hope it will be of some help to u
http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
hey body yes i do that but steel not working. the 3 button combo not working for me . i read somewhere that i must wipe cache but if i can not go to recovery mode i cant wipe cache.
my phone is bricked and i can not go to recovery mode.
thanx for all
i found the solution.
it was my fault that the 3 button combo not working.
my phone it must be power off then must press and hold the V UP + Home then hold the power button and it will be go to recovery mode same for download mode.
but thanx for your replay .
jusper67 said:
thanx for all
i found the solution.
it was my fault that the 3 button combo not working.
my phone it must be power off then must press and hold the V UP + Home then hold the power button and it will be go to recovery mode same for download mode.
but thanx for your replay .
Click to expand...
Click to collapse
Thank you your post is very useful
jusper67 said:
thanx for all
i found the solution.
it was my fault that the 3 button combo not working.
my phone it must be power off then must press and hold the V UP + Home then hold the power button and it will be go to recovery mode same for download mode.
but thanx for your replay .
Click to expand...
Click to collapse
For download mode, it's V Down home and power
Sent from my Toaster using Tapatalk 2

install ics went ****ty

im trying to install ics to my gs2 after i used odin to flash the rom and was giving me fail few times i got weird this u can check the attached file
USB jig...
Inviato dal mio GT-I9100 con Tapatalk 2
valentinrascu said:
USB jig...
Inviato dal mio GT-I9100 con Tapatalk 2
Click to expand...
Click to collapse
thank you for the reply but im noob can u explain more plz
This is bcoz your fw update failed...
Try to update it again...
If you're able to go into download mode..
If possible post the error msg you are getting in odin
Sent from my GT-I9100 using Tapatalk 2
You need to buy USB jig to send your phone in download mode. Try to remove battery.
Inviato dal mio GT-I9100 con Tapatalk 2
based on your pic, check you usb connection. do not use usb hub, has to be connected directly.
laptop is the best way to flash, if you are on desktop, disconnect any other usb except mouse
valentinrascu said:
You need to buy USB jig to send your phone in download mode. Try to remove battery.
Inviato dal mio GT-I9100 con Tapatalk 2
Click to expand...
Click to collapse
Why are you asking him to buy a jig... He didn't said that... He is not able to go into download mode did he?
Sent from my GT-I9100 using Tapatalk 2
rjsmer said:
Why are you asking him to buy a jig... He didn't said that... He is not able to go into download mode did he?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
yes im not able to go to download mode, what to do if i don't have jig?
Lancez said:
based on your pic, check you usb connection. do not use usb hub, has to be connected directly.
laptop is the best way to flash, if you are on desktop, disconnect any other usb except mouse
Click to expand...
Click to collapse
im not using usb hub just directly from laptop to phone
genx1988 said:
yes im not able to go to download mode, what to do if i don't have jig?
Click to expand...
Click to collapse
Vist service center or make a usb jig...
Sent from my GT-I9100 using Tapatalk 2
Stop.
That picture of phone - /!\ - pc?
It IS a download mode. It is a forced download mode, indicating that you need to flash a proper firmware for your phone before you will be able to do anything else.
I'd make sure you are flashing a firmware that is actually meant for your phone or not.
Check your model number that is printed on the label underneath your battery. What does it say?
And what were you trying to flash?
EDIT to add: most times I have seen this screen reported is due to an I9100G user trying to flash an I9100 firmware or ROM, or the opposite; an I9100 user trying to flash an I9100G firmware or ROM. My guess is you fall into one of these two categories.
Steps to recover this
try getting into download mode Vol dwn + home + power
if u cant then try this : remove battery and keep it for 2 minutes .. later press and hold vol dwn + power + home then while holdin the buttons plug in the battery
if u still cant get into download mode
then then buy a usb jig from ebay .. it will help u get to download mode
once in download mode
flah the kernel first
once done
remove usb remove battery again get ur phone in download mode
and flash the full firmware
and ur done
threads useful for u
for i9100 : http://forum.xda-developers.com/showthread.php?t=1449771
for i9100g : http://forum.xda-developers.com/showthread.php?t=1619571
Need any help pm me
Also please mention if u r on i9100 or i9100g or specify the model no
neerajganga said:
Steps to recover this
try getting into download mode Vol dwn + home + power
if u cant then try this : remove battery and keep it for 2 minutes .. later press and hold vol dwn + power + home then while holdin the buttons plug in the battery
if u still cant get into download mode
then then buy a usb jig from ebay .. it will help u get to download mode
once in download mode
flah the kernel first
once done
remove usb remove battery again get ur phone in download mode
and flash the full firmware
and ur done
threads useful for u
for i9100 : http://forum.xda-developers.com/showthread.php?t=1449771
for i9100g : http://forum.xda-developers.com/showthread.php?t=1619571
Need any help pm me
Also please mention if u r on i9100 or i9100g or specify the model no
Click to expand...
Click to collapse
my phone is i9100g and i checked the links u gave thank u very much but mine isn't a soft bricks
genx1988 said:
my phone is i9100g and i checked the links u gave thank u very much but mine isn't a soft bricks
Click to expand...
Click to collapse
Soft brick is just a term that is loosely thrown about that has become to mean that your phone will not boot. That is your situation.
If you are ABSOLUTELY sure you have an i9100G, then follow the guide for the i9100G that neerajganga linked above, it should get you squared away.
And in the future, make sure you are flashing i9100G firmwares, ROMs, and kernels only. I'd wager a guess you got into this situation by flashing an I9100 firmware, ROM, or kernel.
ctomgee said:
Stop.
That picture of phone - /!\ - pc?
It IS a download mode. It is a forced download mode, indicating that you need to flash a proper firmware for your phone before you will be able to do anything else.
I'd make sure you are flashing a firmware that is actually meant for your phone or not.
Check your model number that is printed on the label underneath your battery. What does it say?
And what were you trying to flash?
EDIT to add: most times I have seen this screen reported is due to an I9100G user trying to flash an I9100 firmware or ROM, or the opposite; an I9100 user trying to flash an I9100G firmware or ROM. My guess is you fall into one of these two categories.
Click to expand...
Click to collapse
i was trying to install ics but i just know there is i9100 and i9100G ufff very stupid move from me.
plz what can i do to fix it
genx1988 said:
i was trying to install ics but i just know there is i9100 and i9100G ufff very stupid move from me.
plz what can i do to fix it
Click to expand...
Click to collapse
Read my post right above yours.
ctomgee said:
Read my post right above yours.
Click to expand...
Click to collapse
THANK YOU VERY VERY VERY MUCH IT WORKS :laugh::victory:
neerajganga said:
Steps to recover this
try getting into download mode Vol dwn + home + power
if u cant then try this : remove battery and keep it for 2 minutes .. later press and hold vol dwn + power + home then while holdin the buttons plug in the battery
if u still cant get into download mode
then then buy a usb jig from ebay .. it will help u get to download mode
once in download mode
flah the kernel first
once done
remove usb remove battery again get ur phone in download mode
and flash the full firmware
and ur done
threads useful for u
for i9100 : http://forum.xda-developers.com/showthread.php?t=1449771
for i9100g : http://forum.xda-developers.com/showthread.php?t=1619571
Need any help pm me
Also please mention if u r on i9100 or i9100g or specify the model no
Click to expand...
Click to collapse
thank you very very much it works :laugh:
genx1988 said:
thank you very very much it works :laugh:
Click to expand...
Click to collapse
glad it helped u

[Q] Galaxy s2 Black screen [Q]

hey
i got a galaxy s2 i wanted to flash it but i think it failed,
now i got a black screen can't go in recovery or download mode,
what i already did:
Battery out wait 10 sec battery in than volume down+Home+Power
Battery out Volume down+Home+Power wait 10sec put the battery back in and volume down+Home+Power
don't know what to do
plz help me
thanks
Snaidel said:
hey
i got a galaxy s2 i wanted to flash it but i think it failed,
now i got a black screen can't go in recovery or download mode,
what i already did:
Battery out wait 10 sec battery in than volume down+Home+Power
Battery out Volume down+Home+Power wait 10sec put the battery back in and volume down+Home+Power
don't know what to do
plz help me
thanks
Click to expand...
Click to collapse
Use a USB jig. What firmware did you flash?
Sent from my potato.
preseodymium said:
Use a USB jig. What firmware did you flash?
Sent from my potato.
Click to expand...
Click to collapse
stupid from me i used a pit file with a pda didn't need a pit file and thats why he crashed
thanks
preseodymium said:
Use a USB jig. What firmware did you flash?
Sent from my potato.
Click to expand...
Click to collapse
the USB jig doesn't work for me..
Snaidel said:
the USB jig doesn't work for me..
Click to expand...
Click to collapse
if its still under warranty then take it to ur nearest samsung service center and see what they say about the same, try to be innocent there

[Q] Galaxy S2 wotn turn on or go to download mode

Hi, i tried to update my galaxy s2 i9100 and it stucked in the middle of process.After that day it wont turn on or go into download mode.I tried with riff jtag but it was unsuccesful,what should i do?? please help me.Thanks
Please post in the right section!:silly:
kleid said:
Hi, i tried to update my galaxy s2 i9100 and it stucked in the middle of process.After that day it wont turn on or go into download mode.I tried with riff jtag but it was unsuccesful,what should i do?? please help me.Thanks
Click to expand...
Click to collapse
did u tried pressing home button+volume down+lock button simultaneously.
if this doesnt work flash new rom using odin and tar files..that should work
Bala_2668 said:
did u tried pressing home button+volume down+lock button simultaneously.
if this doesnt work flash new rom using odin and tar files..that should work
Click to expand...
Click to collapse
How is he going to flash something through Odin if he can't enter Donwload Mode..?
Sent from the Matrix

Categories

Resources