I think I rooted my dads Dell streak...it was so long ago I don't recall...now he wants it totally stock and I can't remember how to remove the root...if I rooted it as well as how to get it back totally stock. Any help?
burro breath said:
I think I rooted my dads Dell streak...it was so long ago I don't recall...now he wants it totally stock and I can't remember how to remove the root...if I rooted it as well as how to get it back totally stock. Any help?
Click to expand...
Click to collapse
If you want it totally stock, you need to reinstall your ROM using the stock recovery and an update.pkg, you can find all the ROM's right here .
I would recommend to flash 366, but you can also flash fine 351 or 360 (both international).
,
Hope this helps
Hi,
Even, I wanted to go back to the stock rom. So, tried to install the stock recovery and rom. After the installation, the phone is going into loop and now, it's saying that can't mount /dev/block/mmcb1k1p5 (or /dev/block/mmcb1k1p1) and saying that Can't mount update.pkg
Request your help with this as I am totally stuck here.
Related
Hi,
i just flashed CM7 pre beta 3 after flashing almost every rom in the forum available and not satisfied by the GB ROMs i want to go back to stock froyo.
I have already downloaded Bell Froyo 2.2.2 gobstopper file,
tried to flashed it over CM7 and unable to complete the process
"Process aborted" for some unknown reason.
Can any one guide me to how to go back to stock.
xateeq said:
Hi,
i just flashed CM7 pre beta 3 after flashing almost every rom in the forum available and not satisfied by the GB ROMs i want to go back to stock froyo.
I have already downloaded Bell Froyo 2.2.2 gobstopper file,
tried to flashed it over CM7 and unable to complete the process
"Process aborted" for some unknown reason.
Can any one guide me to how to go back to stock.
Click to expand...
Click to collapse
Use tenfar's unlocked CWM.
Cheers!
Testing rit now, report with results as soon as i get the stock love
Flashed without any problem,
factory reset, wiped cashe
installed unlocked bell zip
after reboot red led shows up and phone reboots.
I think i am stuck in boot loop
Now what to do ?
I have managed to get back to Aura ROM
now will try to go back to stock.
Booting Aura rit now (y it is taking forever to boot )
Finally out of CM7
Now trying to go back to stock
Well, not sure what happened there, you can apply the ihop_bell again to see if that fixes it.
Cheers!
I managed to get back to Aura ROM and tried to flash bell 2.2.2 zip and process aborted i think that zip only works with tenfar's unlocked CWM only that managed to fully flash the rom but stucked with boot loop.
Now going to flash Alien rom (personally Aura removes blot and adds his own crap)
Nop bell stock 2.2.2 is giving error in all 3 recoveries
What to do ?
Have you tried fruitcaking?
iRobby said:
Have you tried fruitcaking?
Click to expand...
Click to collapse
Nop not yet, i want to go back to stock Bell
is it any good ?
Hi,
If you backed up your pds partition, try restoring that. Probably some sbf you tried modified it, changing the signature maybe.
Cheers!
I didn't backed-up any thing (no need of backup)
if u have any then let me have it
Nop dont have any backup, didnt bothered to keep any backup. now i am thinking i was so wrong
Hi,
I just threw that out there, it's the only partition that I don't touch, but sbf files can modify it, since I got my replacement phone I have never used a French/Orange/ATT whatever sbf, so that's probably the difference. My backup is the 2.2.2 Gobstopper really, I also have a pds backup but it's useless for other phones.
Only other idea would be to change the radio first, there are radio only sbfs out there, go for the .15P one for Bell. Once on my previous phone when going from Telstra and French there were issues due to the radio if I recall correctly.
Cheers!
ok so i wouldnt say im a noob but im not as advanced as some of yous. last night i flashed a leaked ics onto my phone and loved it with one exception. i couldnt figure out how to root it. all my apps are backed up on titanium backup and i didnt want to have to get all of them manually. so i flashed back to stock using odin with a file i used back when that crappy update came out. i rooted it with super one click and and then went to put on a prerooted ics... when in recovery mode now i get this message
cant access to '/system/csc/att/system/'
i try putting on cwm and siyah and i keep getting authentication errors and the installation aborts. also recovery mode wont read my external sd card now. when the phone is booted up it works fine except i tried to do the factory ota update and it keeps failing. i tried reflashing back to stock again and did the update unrooted and it still failed.
i know you guys hate hate when people ask without researching so i did SOME forum browsing and found nothing. sorry i dont really have time to look too extensively. i just want to know how to fix it. i appreciate any help i can get
Joeyjr25 said:
ok so i wouldnt say im a noob but im not as advanced as some of yous. last night i flashed a leaked ics onto my phone and loved it with one exception. i couldnt figure out how to root it. all my apps are backed up on titanium backup and i didnt want to have to get all of them manually. so i flashed back to stock using odin with a file i used back when that crappy update came out. i rooted it with super one click and and then went to put on a prerooted ics... when in recovery mode now i get this message
cant access to '/system/csc/att/system/'
i try putting on cwm and siyah and i keep getting authentication errors and the installation aborts. also recovery mode wont read my external sd card now. when the phone is booted up it works fine except i tried to do the factory ota update and it keeps failing. i tried reflashing back to stock again and did the update unrooted and it still failed.
i know you guys hate hate when people ask without researching so i did SOME forum browsing and found nothing. sorry i dont really have time to look too extensively. i just want to know how to fix it. i appreciate any help i can get
Click to expand...
Click to collapse
Start with getting back to stock using this guide. Check for ICS bootloaders too, you probably flashed them and you have to get stock ones back (careful, flashing bootloaders can cause hardbricking). Once you're back to stock and rooted, you shouldn't need to ever use PC Odin again.
Then use this guide for rooting/flashing.
One other note: when you tried to install CWM, it sounds like you loaded an update.zip onto your phone then tried to install it using stock recovery. Stock recovery won't let you install unsigned update.zips, which is why that method for getting CWM on your phone will never work (hence the authentication error and installation abort). For our phone, CWM is only included in custom kernels, that's the only way to get it on there, and don't even think about updating or changing it via other means. Just flash a custom kernel, it'll include CWM, use it until you want to switch kernels.
Hit my thanks button, I was really nice this time. And post in Q/A next time as well.
EDIT: Skip the second guide if all you want is stock. You should be able to update OTA after following the first guide. Though even if stock is what you want, I highly recommend flashing a custom GB kernel because a) they're more stable and faster and b) you'll have CWM in case you need it.
You started off mentioning about "leak ics" which I have absolutely zero experience.
My suggestion:
1. Try to get it back to stock. Make sure it works correctly.
2. If hasn't rooted yet, do so.
3. Getting CMW into the device by flashing custom kernel.
4. From there, install any ICS ROM you want.
Alright, so I went into the phone store to get data for my phone, but the person told me that since i upgraded to ICS, the phone is not going to be recognized etc. that was some time ago and I don't remember what he said entirely. He suggested I go back to the stock gingerbread that my phone came with, but looking around I can't exactly seem to find it. So going through androidfirmwares.net i downloaded and flashed one that looked promising, (JPKJ2), but after rebooting my data was not appearing. I guess my question is where can i find or do to restore my phone to the stock gingerbread that it came with? It's international and unlocked.
PDA:I9100JPKJ2
Phone:I9100XXKI4
CSC:Uknown
r3k0iL said:
Alright, so I went into the phone store to get data for my phone, but the person told me that since i upgraded to ICS, the phone is not going to be recognized etc. that was some time ago and I don't remember what he said entirely. He suggested I go back to the stock gingerbread that my phone came with, but looking around I can't exactly seem to find it. So going through androidfirmwares.net i downloaded and flashed one that looked promising, (JPKJ2), but after rebooting my data was not appearing. I guess my question is where can i find or do to restore my phone to the stock gingerbread that it came with? It's international and unlocked.
PDA:I9100JPKJ2
Phone:I9100XXKI4
CSC:Uknown
Click to expand...
Click to collapse
Intall the Titanium Backup Pro, backup your phone. Then flash the stock GB, install the CWM Recovery. Thru the recovery do a restore. That's it.
Mariacci said:
Intall the Titanium Backup Pro, backup your phone. Then flash the stock GB, install the CWM Recovery. Thru the recovery do a restore. That's it.
Click to expand...
Click to collapse
Yeah, that's the thing. I can't find the stock gingerbread to download. Also, the person told me once I went back to GB the data marker should appear, which it did not :/
r3k0iL said:
Yeah, that's the thing. I can't find the stock gingerbread to download. Also, the person told me once I went back to GB the data marker should appear, which it did not :/
Click to expand...
Click to collapse
Here you can get offical firmware's. But, registration required. Also here.
So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
dar101978 said:
So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
Click to expand...
Click to collapse
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
CalcProgrammer1 said:
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
Click to expand...
Click to collapse
Thanks thats what i did, I just basically had to use KIES to use the emergency recovery, then root my phone again. My question is what version of TWRP causes this? cause i used the newest version i could find off GOO. My other concerne is, will it accept or be safe to use a custom ROM? Well i gues ill find out :laugh: THANKS AGAIN!
Everyone with the sgh-i717 is having problems with the latest TWRP and the most stable version is 2.5.0.0. Go with that one or you'll be starting all over again I imagine. And don't just stop at the download link in the OP's, read the thread and find out what's going on. The problems with TWRP have been going on for a while and the development threads have a lot of comments about the latest build causing problems. Good luck! :good:
I am a bit of a noob but I have rooted my sprint note 3 which came out successful. I have rooted my galaxy s3 before in the past and flashed many roms without any issues.
Once I rooted my note 3 I ran the stock rom for a week and then decided to kick it up a notch and flashed the bonsai rom, which worked fine until i discovered the camera didn't work. Before I flashed the bonsai rom, I did a backup of the stock rom via cwm. Once I figured out the camera didn't work with the bonsai rom, I reset and wiped the data for my phone and tried to restore the stock rom which i figured it was a boo boo because I got stuck in a bootloop so I reflashed the bonsai rom back on my phone until I got back home to my pc. At that point, I decided to unroot and return the phone back to stock. I used odin and followed unrooting instructions to a tee and I had an official stock firmware, but odin failed and I think I may have soft bricked my phone. In a panic, I downloaded a "rooted stock" rom and flashed that...after a few bootloops, I updated my cwm recovery and superuser app...and my phone has been working fine every since (whew). I really want to unroot, then re-root and just run the stock rom without flashing any more custom roms, however I am afraid of bricking it again.
I have the stock official firmware N900PVPUBMJ4_N900PSPTBMJ4_N900PVPUBMJ4_HOME.tar.md 5 which to my understanding is android 4.3. I do understand that 4.4 is out. I was wondering is it ok to flash the 4.3 using odin to return my phone back to stock?? I've been spooked ever since my soft brick encounter. Any info will be helpful. Btw, sorry for the long story. I figured I should give all the details. That would help me get to the bottom of it all
Thanks in Advance!
LadyDroid81 said:
I am a bit of a noob but I have rooted my sprint note 3 which came out successful. I have rooted my galaxy s3 before in the past and flashed many roms without any issues.
Once I rooted my note 3 I ran the stock rom for a week and then decided to kick it up a notch and flashed the bonsai rom, which worked fine until i discovered the camera didn't work. Before I flashed the bonsai rom, I did a backup of the stock rom via cwm. Once I figured out the camera didn't work with the bonsai rom, I reset and wiped the data for my phone and tried to restore the stock rom which i figured it was a boo boo because I got stuck in a bootloop so I reflashed the bonsai rom back on my phone until I got back home to my pc. At that point, I decided to unroot and return the phone back to stock. I used odin and followed unrooting instructions to a tee and I had an official stock firmware, but odin failed and I think I may have soft bricked my phone. In a panic, I downloaded a "rooted stock" rom and flashed that...after a few bootloops, I updated my cwm recovery and superuser app...and my phone has been working fine every since (whew). I really want to unroot, then re-root and just run the stock rom without flashing any more custom roms, however I am afraid of bricking it again.
I have the stock official firmware N900PVPUBMJ4_N900PSPTBMJ4_N900PVPUBMJ4_HOME.tar.md 5 which to my understanding is android 4.3. I do understand that 4.4 is out. I was wondering is it ok to flash the 4.3 using odin to return my phone back to stock?? I've been spooked ever since my soft brick encounter. Any info will be helpful. Btw, sorry for the long story. I figured I should give all the details. That would help me get to the bottom of it all
Thanks in Advance!
Click to expand...
Click to collapse
Depends on what version you are running, but sounds like you are on mj4 still... http://forum.xda-developers.com/showthread.php?t=2657828 this one is mj4 (4.3), if you are on 4.4 you need to go to the Android development forum and use whatever version you are on, just look for rwilcos one click.
tonyevo52 said:
Depends on what version you are running, but sounds like you are on mj4 still... http://forum.xda-developers.com/showthread.php?t=2657828 this one is mj4 (4.3), if you are on 4.4 you need to go to the Android development forum and use whatever version you are on, just look for rwilcos one click.
Click to expand...
Click to collapse
Yes...I am still on 4.3.
LadyDroid81 said:
Yes...I am still on 4.3.
Click to expand...
Click to collapse
Follow the instructions from this thread and you will be fully unrooted http://forum.xda-developers.com/showthread.php?t=2657828:good: