Hello all
i tried flashing with odin mobile thing pro but i failed now when i boot up nothing comes up after the samsung logo. i can still use download and recovery mode (the recovery mode is from sasmung) my phone is rooted , had 2.3.3 on it and is an samsung galaxy s2 I9100 hope you guys can help me i was trying to update it to 2.3.6 can you guys help me with that too?
kristofer_gvenetadze said:
Hello all
i tried flashing with odin mobile thing pro but i failed now when i boot up nothing comes up after the samsung logo. i can still use download and recovery mode (the recovery mode is from sasmung) my phone is rooted , had 2.3.3 on it and is an samsung galaxy s2 I9100 hope you guys can help me i was trying to update it to 2.3.6 can you guys help me with that too?
Click to expand...
Click to collapse
boot to recovery mode and perform a factory reset. Reboot your phone
Your device should boot now , if the flashing process was error- free.
Swyped from my Galaxy SII
This is a soft brick ( don't panic , when i don't softbrick my phone at least once every couple of days , i feel that something is wrong with the phone )
Ok here is what to do
1) download siyah kernel.tar from http://www.gokhanmoral.com/public/files/siyahkernel/v3.0/Siyah-v3.3.3d.tar
2)download pc odin3 v1.85 ( google it)
3) get into download mode and flash siyah kernel
4) download a rom.zip and put on ur external sd card using a card reader to connect it to ur pc
5) boot into siyah kernel's recovery mode and install zip from sdcard then install the rom u want
It is recommended to wipe data and cache via recovery ( but dont do it if u were on 4.0.4 or were trying toi stall it)
Tefanym said:
This is a soft brick ( don't panic , when i don't softbrick my phone at least once every couple of days , i feel that something is wrong with the phone )
Ok here is what to do
1) download siyah kernel.tar from http://www.gokhanmoral.com/public/files/siyahkernel/v3.0/Siyah-v3.3.3d.tar
2)download pc odin3 v1.85 ( google it)
3) get into download mode and flash siyah kernel
4) download a rom.zip and put on ur external sd card using a card reader to connect it to ur pc
5) boot into siyah kernel's recovery mode and install zip from sdcard then install the rom u want
It is recommended to wipe data and cache via recovery ( but dont do it if u were on 4.0.4 or were trying toi stall it)
Click to expand...
Click to collapse
Thx !!!!
Tefanym said:
This is a soft brick ( don't panic , when i don't softbrick my phone at least once every couple of days , i feel that something is wrong with the phone )
Ok here is what to do
1) download siyah kernel.tar from http://www.gokhanmoral.com/public/files/siyahkernel/v3.0/Siyah-v3.3.3d.tar
2)download pc odin3 v1.85 ( google it)
3) get into download mode and flash siyah kernel
4) download a rom.zip and put on ur external sd card using a card reader to connect it to ur pc
5) boot into siyah kernel's recovery mode and install zip from sdcard then install the rom u want
It is recommended to wipe data and cache via recovery ( but dont do it if u were on 4.0.4 or were trying toi stall it)
Click to expand...
Click to collapse
thx again it worked !!!
kristofer_gvenetadze said:
thx again it worked !!!
Click to expand...
Click to collapse
Happy to hear that , just stay away from ICS 4.0.4
problem with the boot
heloo everyone i updated my samsung galaxys3 (SHVE210S) using odin(ICS to JELLYBEAN) but after the installation odin says SUCESS but my phone is not working :/ phone is starting but stuck in a moment after the welcome sound can plzzz anyone can help me how to resolve this problem, is it a problem in the firmware ????
not going after samsung logo
Tried rooting my s2 using odin. went into download mode then connected the phone. and clicked start. according to the instructions for rooting from youtube , it said the phone would restart after it said PASS on Odin. After it showed PASS it didnt restart even after a very longtime. so i disconnected.
Now i get the samsung logo with a triangle below. I m able to go to download mode.
Pls help guys
Related
2 days ago i restart my phone but it dont, it just flashing the touchscreen and stay so until i drop the battery, i try an update whit odin but fail... so anyone knows?(sorry for bad english)
geo95cornel said:
so until i drop the battery, i try an update whit odin but fail(sorry for bad english)
Click to expand...
Click to collapse
Just boot into recovery mode and choose wipe data/factory reset. Otherwise flash new rom via Odin. Use only backfront panel of your PC to connect USB.
how can i start recovery mode because i tried all combinations and does'nt work
geo95cornel said:
how can i start recovery mode because i tried all combinations and does'nt work
Click to expand...
Click to collapse
home button + power ...hold till screen comes on ....will b a bit tougher on stock recovery ....try untill u succeed
i tried home+power button and again its flashing... i install a stock whit odin and again its flashing....
geo95cornel said:
i tried home+power button and again its flashing... i install a stock whit odin and again its flashing....
Click to expand...
Click to collapse
i cant understand what u want to say bud but theres an alternative :
IF u can access your recovery mode , flash cwm recovery , root your phone and flash stocklitev7 ...its a stock based rom ..u will like it ....and then after the phone boots try to flash your stock rom again with odin ,,,the flashing aand rooting guide is present in sga android development section .......
ohh wait mayb i can undertand what u mean .....do u have kies installed on your pc ??? kies is needed for the usb drivers needed to get your phone recognized by odin .....u cant flash a rom until that " yellow box " appearss,,,,,.....
i cant access anything because the phone doesnt start, he is just flashing, i can use only download mode, i have kies,odin etc but when i install a rom whit odin the phone its flashing again...
geo95cornel said:
i cant access anything because the phone doesnt start, he is just flashing, i can use only download mode, i have kies,odin etc but when i install a rom whit odin the phone its flashing again...
Click to expand...
Click to collapse
does flashing mean its rebooting ?
ok so u flashed a rom ???? have u flashed a new stock rom with odin ????
did u "wipe cache partition "
this u have to do in recovery mode i cant get why u cant access it is your phone GT S5830???
He meant that his touchscreen is flashing and he can't do a thing with it.
The answer is simple. Take the phone to the local Samsung service centre.
Just don't mention that you tryed ODIN, or KIES to revive the touchscreen.
Hello,
first of all sorry for my english. I try me best but this is not my native language and i hope everyone can read this .
I have a strange Problem with my I9100 SG2.
I can flash a new FW with ODIN e.g. [ROM][ICS Firmwares] I9100XWLPX [29.08.2012][Android 4.0.4] and the Phone runs very well, but i cant flash anything else.
If flash the Siyah Kernel 4.1.5 with ODIN than i got stuck in a bootloop. I can enter recovery mode and do a wipe but this dont fix the bootloop.
If i try to flash anything else in the recovery mode the flash start and run till 40-70% and than it stops.
The only way to recover the SG2 is to flash a new stock FW like the I9100XWLPX and than i can start the phone and the bootloop is gone.
I have a lot experience with different androids devices and this is the first time where i don't have a solution.
Did someone have a Idear what i can try to flash a custom kernel or rom? What is going wrong?
Maybe i can fix it when i flash a 3-part FW with a PIT file.
kind regards,
Preacher
P.S.: I don't found any thread that can help me.
Did someone have a solution ?
many thx,
Preacher
Hy Preacher. So if i get it right this solves your problem:
Ok here is what to do
1) get into download mode and flash siyah kernel via Odin
2) download a rom.zip and put on ur external sd card using a card reader to connect it to ur pc
3) boot into siyah kernel's recovery mode and install zip from sdcard then install the rom u want
It is recommended to wipe data and cache via recovery ( but dont do it if u were on 4.0.4 or were trying to installing it).
Mantulis said:
Hy Preacher. So if i get it right this solves your problem:
Ok here is what to do
1) get into download mode and flash siyah kernel via Odin
2) download a rom.zip and put on ur external sd card using a card reader to connect it to ur pc
3) boot into siyah kernel's recovery mode and install zip from sdcard then install the rom u want
It is recommended to wipe data and cache via recovery ( but dont do it if u were on 4.0.4 or were trying to installing it).
Click to expand...
Click to collapse
I tryed this already but the install process stops in the middle of the progress bar.
Than i can only recover the Phone if i install a Stock ROM via Odin. I used a 4.0.4 an test the memory with a tool from the play store and the emmc brick toll told me that i dont have chip that is responsible for the brick bug.
What happens if the install hold between 40-70% and don't go any further.
many thx,
Preacher
Hhm ok then. We should go deeper. Please show me the errors you get. Try to install a rom via cm-recovery and try to attach logcat then it crash.
To save a log to a file,
adb logcat > logcat.txt
Hi guys, yesterday I rooted my SG2 with Jelly Bean 4.1.2 XXLSJ, it wasnt done in download mode, i put the zip file on sd card and went into stock recovery and used apply update from sd card and then rebooted but now my phone hangs at the Samsung Galaxy SII screen until i remove the battery or go back into recovery
I can get into recovery but when i reboot the phone it just hangs . Ive wiped the data and cache and re flashed the zip file but it still hangs
Any help please
Download Philz.tar or Siyah 6.04.tar kernel and put it to phone via odin.
grisoxxl said:
Download Philz.tar or Siyah 6.04.tar kernel and put it to phone via odin.
Click to expand...
Click to collapse
does the phone have to be in USB Debugging mode, if so im stuck
Do not worry of USB Debugging mode.
Follow this steps just use kernel from attachments.
- (USB) Disconnect your phone from your computer
- Start ODIN
- Click the PDA button, and select siyah.tar
- Put your phone in download mode(vol down+power+menu button)
- (USB) Connect the phone to your computer
- Make sure repartition is NOT checked
- Click the START button
- Wait for the phone to reboot
Ive used Odin to reflash my phone with Siyah 6.04.tar kernel. According to Odin everything was ok but when phone rebooted i got the Samsung Galaxy SII screen this time with the yellow triangle and then the phone goes blank, ie turns off and nothing else
In recovery mode clean cache, dalvik cache and fix permision, if this dont help install new rom.
grisoxxl said:
In recovery mode clean cache, dalvik cache and fix permision, if this dont help install new rom.
Click to expand...
Click to collapse
still no luck, any suggestions on new ROM
oohmygod831 said:
still no luck, any suggestions on new ROM
Click to expand...
Click to collapse
It is up to you. My is in my signature(I'm satisfied with it).
Maybe try Flash Stock rom ? And then Flash XXLSJ ?
Basically you stuck in a boot loop ...reason behind it is bad boot img., according to me. You can try restoring only system (in advance restore) or the entire nandroid itself, This is only if you have a backup done before.
Hello every body :
I have a problem with my samsung galaxy mini 2 GT-S6500D ,
Firstly I have installed jellybean 4.2.2 custom rom , but I found some problem with it ( like white screen ) .
So I decided to flash back the official stock firmware 2.3.6 by odin ( I do that without entering recovery mode and wipe cache/data ) problem arise and I got the following :
1- My phone stucks at the samsung logo screen and reboots till I remove the battery to stop rebooting . I tried to reinstall the stock firmware again but still no solution .
2- I cannot get into recovery mode to wipe cache and factory reset , When I press the keys volume up + volume down + home key + power key , phone won`t start and thus no recovery mode menu .
3- I installed cwm-6.0.3.3-jena.tar.md5 custom recovery using odin but still cannot get into recovery mode .
ANY SOLUTION ,,,,, PLEASE HELP ????
regards
drali8888 said:
3- I installed cwm-6.0.3.3-jena.tar.md5 custom recovery using odin but still cannot get into recovery mode .
Click to expand...
Click to collapse
when you flash CWM only, untick reboot in Odin3 after flash is successful, power down by battery pull and enter CWM recovery by combo keys to do the wipes including dalvik cache in advanced and try again flashing
other solutions look below in My Android solutions.
Check this out! You , YES! you are an " Android ". Not your phone but U.
xsenman said:
when you flash CWM only, untick reboot in Odin3 after flash is successful, power down by battery pull and enter CWM recovery by combo keys to do the wipes including dalvik cache in advanced and try again flashing
other solutions look below in My Android solutions.
Check this out! You , YES! you are an " Android ". Not your phone but U.
Click to expand...
Click to collapse
thanks , but i tried to flash CWM with unchecking auto reboot in Odin3 then pull battery BUT problem still present , I tried the other solution in the links BUT does not work for me
after odin flash reboot in stockrecovery and do a factory reset,reboot.
drali8888 said:
thanks , but i tried to flash CWM with unchecking auto reboot in Odin3 then pull battery BUT problem still present , I tried the other solution in the links BUT does not work for me
Click to expand...
Click to collapse
you need to go here and post or look for PIT file used with Stock ROM to flash your unit
The mini use tass .ops, not sure what is used for Mini 2 also read this thread
Check this out! You , YES! you are an " Android ". Not your phone but U.
-CALIBAN666- said:
after odin flash reboot in stockrecovery and do a factory reset,reboot.
Click to expand...
Click to collapse
I CANNOT get into recovery mode either stockrecovery or custom !
xsenman said:
you need to go here and post or look for PIT file used with Stock ROM to flash your unit
The mini use tass .ops, not sure what is used for Mini 2 also read this thread
Check this out! You , YES! you are an " Android ". Not your phone but U.
Click to expand...
Click to collapse
I tried to flash the pit file in this thread http://forum.xda-developers.com/showthread.php?t=2226321 using Odin3 , but phone still stucks at samsung logo beside that I cannot access recovery mode , I looked for a solution in the link here but no one posted the correct solution
drali8888 said:
I tried to flash the pit file in this thread http://forum.xda-developers.com/showthread.php?t=2226321 using Odin3 , but phone still stucks at samsung logo beside that I cannot access recovery mode , I looked for a solution in the link here but no one posted the correct solution
Click to expand...
Click to collapse
ok, try the reboot tool from PC, I have a collection of recovery tool in My Android Collections, try them, if this fails
The galaxy Mini is using .ops file and not PIT file, so some Google search might help you to understand which version of Odin3 is used for
Mini 2
EDIT: ok checked and 6500D is using PIT, you can download from here
for ROMs you can download from here, (Download fresh one and try) when using PIT, re-partition must be checked also remove SIM card and EXT SD card, when flashing, battery must be charged.
Check this out! You , YES! you are an " Android ". Not your phone but U.
xsenman said:
ok, try the reboot tool from PC, I have a collection of recovery tool in My Android Collections, try them, if this fails
The galaxy Mini is using .ops file and not PIT file, so some Google search might help you to understand which version of Odin3 is used for
Mini 2
EDIT: ok checked and 6500D is using PIT, you can download from here
for ROMs you can download from here, (Download fresh one and try) when using PIT, re-partition must be checked also remove SIM card and EXT SD card, when flashing, battery must be charged.
Check this out! You , YES! you are an " Android ". Not your phone but U.
Click to expand...
Click to collapse
Thanks man for your replies >> the problem was solved
I was butting my phone on usb cable it showed charging icon at this time i pressed the bottoms volume up + down + home + power it restarted in custom recovery mode , fortunately FINALLY i am in recovery mode :good::victory: then i did cache wipe and factory reset and my phone boot normally without problem
Hey I 'm new here and I need a help let me start from first yesterday i tried to install TransWin Cutom Rom for GT-I8552 I couldnt install cwm recovery by odin method so I rooted my phone first with RootGenius and tried to flash cwm recovery with rashr app this app successfully flashed cwm recovery in my phone and after that a pop up appeared saying that whether i wanted to go to recovery or not so I clicked yes and in a couple of seconds I was in the recovery mode I already had the rom in my extSD so I flashed the rom and when I tried to reboot the system I was booted again in the recovery I guess I was in cwm recovery bootloop so I thought I should try to flash stock rom via odin , I was in the recovery mode so I went to advance options and from there I chose 'reboot to bootloader' and then I was able to enter download mode so I connected my phone to laptop via usb data cable after connecting I opened odin but niether did odin recognize my phone and nor did my laptop it recognizes another phones but not mine than I thought to install another rom in a hope that it would help me so I downloaded DroidWin Rom moved to extSD and flashed it successfully but even that didnt helped me I was again in the cwm recovery bootloop I tried all the "CWM RECOVERY LOOP FIX" available on google but unfortunately all in vain is it some sort of hardware problem or its a software problem anyways whatever it is the main point is WHAT SHOULD I DO NOW TO RECOVER MY PHONE CAN ANYONE PLEASE HELP ME ?
ANY HELP WILL BE GREATLY APPRECIATED
may it help you
Two days before i was too suffering from a bootloop.I was creating lollipop rom for quattro but eventually due to error in updater script while flashing rom my phone got stucked in bootloop, i flash stock rom through odin twice but in vain.But finally i was able to solve it
Plz Follow the steps below
1. Make Sure Battery is fully 100% charge
2. start odin in PC (make sure package is up to date or u can download it from sammobile)
3. Switch to download mode by pressing Volume DOWN + HOME + POWER button:good:
4. connect phone to pc
5. press volume up and then flash stock rom
if above soln wont work then WIPE dalvik cache and WIPE cache partition and then try to flash philz recovery or twrp recovery
tempdhyey said:
Two days before i was too suffering from a bootloop.I was creating lollipop rom for quattro but eventually due to error in updater script while flashing rom my phone got stucked in bootloop, i flash stock rom through odin twice but in vain.But finally i was able to solve it
Plz Follow the steps below
1. Make Sure Battery is fully 100% charge
2. start odin in PC (make sure package is up to date or u can download it from sammobile)
3. Switch to download mode by pressing Volume DOWN + HOME + POWER button:good:
4. connect phone to pc
5. press volume up and then flash stock rom
if above soln wont work then WIPE dalvik cache and WIPE cache partition and then try to flash philz recovery or twrp recovery
Click to expand...
Click to collapse
Hey i tried that too but my phone wasnt detected in odin i tried it in another pc though it didnt worked so how could i flash a rom dude anyways thanks for replying and helping I really appreciate it :good:
Monarch Maisuriya said:
Hey i tried that too but my phone wasnt detected in odin i tried it in another pc though it didnt worked so how could i flash a rom dude anyways thanks for replying and helping I really appreciate it :good:
Click to expand...
Click to collapse
Do you have Kies install in your PC ? ( IF yes ) then plz uninstall it ,as it kill odin functions and wont let it work. But make sure to install device driver ..
Hope it work
tempdhyey said:
Do you have Kies install in your PC ? ( IF yes ) then plz uninstall it ,as it kill odin functions and wont let it work. But make sure to install device driver ..
Hope it work
Click to expand...
Click to collapse
Damn it didnt worked
THANKS for replying:good:
monarch maisuriya said:
damn it didnt worked
thanks for replying:good:
Click to expand...
Click to collapse
i think i should take it to the service center