I accidentally formatted my g-tablet (via clockwork)...and there is no ROM to flash on the root of the tablet itself. I can still boot into recovery but I cannot flash anything since I haven't put a rom on there. Is there a way to flash from the SD card? If not, how can I get something on the tab's internal drive to flash from there? I can't access the tab's internal drive at all from my computer when I do POWER while holding VOL DOWN - I don't have the drivers and I am unable to find them (APX that is, win7 64bit).
I don't have the tablet infront of me, but you can mount your sd to usb mode, and copy a rom to it, all from clockwork. So should should be fine.
You can download the driver here:
developer.download.nvidia.com/tegra/files/android_tegra_froyo_20101105.msi
In clockwork its something like Mounts and Storage. Go there, then mount usb at the bottom.
Now it will pop up on your computer as a removable drive just as if it was booted up. Copy your rom over and unmount, install from SD.
regalpimpin said:
In clockwork its something like Mounts and Storage. Go there, then mount usb at the bottom.
Now it will pop up on your computer as a removable drive just as if it was booted up. Copy your rom over and unmount, install from SD.
Click to expand...
Click to collapse
PERFECT! Worked! Thank you =)
Hey,
I've flashed Omega 33.2 and Siyah 1.8 kernel.
I used 5.5.0.4 CWM recovery (didn't change the recovery, just flashed Omega and right after Siyah).
I then flashed something from Omega kitchen that I guess made some problems with the ROM, so I got in a bootloop. Not a problem - I will just flash the rom again and everything will be ok, but unfortunately I deleted the rom from my phone memory. In those situations I just go inside recovery and mount the sdcard, so I went into mounts and storage -> mount /sdcard, I connected to my computer (windows 7) but nothing happened. So I tried to install kies, but it didn't help too. I also tried the same in Ubuntu (maybe it's mass storage and not MTP because from what I know linux doesn't support MTP), but it didn't worked.
I end up taking my external sd card, putting the rom on it, and flashed the zip from the external sd card.
I don't want to do it every time I want to put something in my phone through recovery. How can I fix this problem? (Yes, I tried more than one USB slot and cable).
Thanks in advance!
TRY
http://forum.xda-developers.com/showthread.php?t=1943592
jje
JJEgan said:
TRY
http://forum.xda-developers.com/showthread.php?t=1943592
jje
Click to expand...
Click to collapse
Thanks for your reply.
Tried TWRP, CWM touch 6, but it didn't work. I tried to mount external sd card and it didn't work also. Tried windows7, ubuntu (I think it's mass storage so it should work), and another computer with windows7, but didn't work in neither of them.
Also, tried 'adb devices' when the phone is plugged in in recovery and it didn't see the device too. Does adb suppose to work when I'm in recovery? (I'm developing Android apps so I'm sure that adb is 100% working when the phone is on).
In CWM 6, I press mount /sdcard and after I press the text is still mount /sdcard (doesn't change to unmount), and when I press mount /ex-sdcard it change to unmount /ex-sdcard but doesn't appear on the computer also.
Does anybody else is facing the same problem? very annoying :S
Nobody faces this problem too..? :/
same issue here!!! trying to get some help as I don't have an SD card available right now
Hi all,
First off, get the laughs out the way. Not posted on here before but used the forum a lot over the past year or so and i desperatley need someones help.
Long story short.
1) Currently i can only access CMR 6.0.3.2
2) I have no ROM available on int SD due to doing a system wipe while flashing Cyanogenmod 11 nightly which failed due to Status 7 error ( did not think this error would happen!)
3) My PC & Laptop will not recognise the S3 through USB despite all correct drivers being correct.
4) CMR will not let me mount the 8GB ext SD card. I have tried formatted to NTSC and Fat 32 and both not mounting, get the mount error message.
To sum it up, im fooked. I cannot access the int SD to drop a ROM on it and cannot access the Ext SD card through recovery which DOES have a ROM on it.
Do any ofyou fantastic people have any idea what i can do apart from dress it up nicely and make an ornament out of it?
Thanks!
Scott
boabbyshaft said:
Hi all,
First off, get the laughs out the way. Not posted on here before but used the forum a lot over the past year or so and i desperatley need someones help.
Long story short.
1) Currently i can only access CMR 6.0.3.2
2) I have no ROM available on int SD due to doing a system wipe while flashing Cyanogenmod 11 nightly which failed due to Status 7 error ( did not think this error would happen!)
3) My PC & Laptop will not recognise the S3 through USB despite all correct drivers being correct.
4) CMR will not let me mount the 8GB ext SD card. I have tried formatted to NTSC and Fat 32 and both not mounting, get the mount error message.
To sum it up, im fooked. I cannot access the int SD to drop a ROM on it and cannot access the Ext SD card through recovery which DOES have a ROM on it.
Do any ofyou fantastic people have any idea what i can do apart from dress it up nicely and make an ornament out of it?
Thanks!
Scott
Click to expand...
Click to collapse
Yes Scott. Do not make an ornament out of it!
Okay, serious .. download the ROM of your region from sammobile.com. Install Odin on your laptop. Boot your S3 in download mode. Flash the firmware from sammobile.com on your phone using Odin.
http://forum.xda-developers.com/showthread.php?t=2323847 - Follow this guide from step 2. No need to make the binary counter 0. It is important to recover your phone.
Hamza18 said:
Yes Scott. Do not make an ornament out of it!
Okay, serious .. download the ROM of your region from sammobile.com. Install Odin on your laptop. Boot your S3 in download mode. Flash the firmware from sammobile.com on your phone using Odin.
http://forum.xda-developers.com/showthread.php?t=2323847 - Follow this guide from step 2. No need to make the binary counter 0. It is important to recover your phone.
Click to expand...
Click to collapse
Hi Hamza,
Thanks for the reply. This is one of the problems noted above as that my laptop and PC will not recognise my S3 via USB. Tried different USB wires and installed various versions of the drivers, uninstalled, reinstalled etc It just will not connect be recognised.
Any other thoughts?
boabbyshaft said:
Hi Hamza,
Thanks for the reply. This is one of the problems noted above as that my laptop and PC will not recognise my S3 via USB. Tried different USB wires and installed various versions of the drivers, uninstalled, reinstalled etc It just will not connect be recognised.
Any other thoughts?
Click to expand...
Click to collapse
Sorry, I thought that your phone will get recognized when in Odin mode or download mode. I am afraid I am out of tricks for now, but let me search and get back to you in case I find anything
Hello Scott,
Can you enter in Download mode on phone?
"First shut down your device, then power on by simultaneously pressing the power button, home button and volume down key. Now you will see download mode and you will be asked if you want to cancel or continue. Press volume up to continue or volume down to cancel and reboot."
For that part you don't need connection to PC (yet).
If u succeed entering in download mode, then use the link that Hamza posted, to restore your device through Odin
HI!
Its no problem to get in to download mode but as the laptop and PC will not recognise my S3, neither does Odin.
The very 1st think i knew to do was to try and flash a stock ROM via Odin, but sadly can't
I've flashed ROM's a lot however it was a rookie mistake not to make a backup on this occasion that was accessable in this situation. My backups and ROMs are on the Ext SD card....
Ive searched and the only 2 outcomes i can see to resolve are to mount my Ext SD card, which i can't do on CMR or to make the handset visible o use Odin or to drop a ROM on the Int SD but again, can't.
boabbyshaft said:
Hi all,
First off, get the laughs out the way. Not posted on here before but used the forum a lot over the past year or so and i desperatley need someones help.
Long story short.
1) Currently i can only access CMR 6.0.3.2
2) I have no ROM available on int SD due to doing a system wipe while flashing Cyanogenmod 11 nightly which failed due to Status 7 error ( did not think this error would happen!)
3) My PC & Laptop will not recognise the S3 through USB despite all correct drivers being correct.
4) CMR will not let me mount the 8GB ext SD card. I have tried formatted to NTSC and Fat 32 and both not mounting, get the mount error message.
To sum it up, im fooked. I cannot access the int SD to drop a ROM on it and cannot access the Ext SD card through recovery which DOES have a ROM on it.
Do any ofyou fantastic people have any idea what i can do apart from dress it up nicely and make an ornament out of it?
Thanks!
Scott
Click to expand...
Click to collapse
Remove your sd card..Use a SD card reader and download a rom which u can flash with your current recovery..flash that through extsdcard...
Sent from my GT-I9300 using xda app-developers app
boabbyshaft said:
HI!
Its no problem to get in to download mode but as the laptop and PC will not recognise my S3, neither does Odin.
The very 1st think i knew to do was to try and flash a stock ROM via Odin, but sadly can't
I've flashed ROM's a lot however it was a rookie mistake not to make a backup on this occasion that was accessable in this situation. My backups and ROMs are on the Ext SD card....
Ive searched and the only 2 outcomes i can see to resolve are to mount my Ext SD card, which i can't do on CMR or to make the handset visible o use Odin or to drop a ROM on the Int SD but again, can't.
Click to expand...
Click to collapse
Have you tried with another USB cable? Sometimes USB cable could be faulty.
kunal1540 said:
Remove your sd card..Use a SD card reader and download a rom which u can flash with your current recovery..flash that through extsdcard...
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
did you read? he can't mount the ext sd card...
hierarchy666 said:
Have you tried with another USB cable? Sometimes USB cable could be faulty.
Click to expand...
Click to collapse
+1
We have 5 or 6 USB cables for our phones around here, and only 3 work for our S3 phones. Worth a try?
One more thing crossed my mind... In CWR, did you try "mount usb storage"? Under "mounts and storage" setting.
I had a similar problem few weeks ago, changed recovery and new recovery didn't want to read exFat card...
Sent from my GT-I9300 using Tapatalk
Soundwve said:
+1
We have 5 or 6 USB cables for our phones around here, and only 3 work for our S3 phones. Worth a try?
Click to expand...
Click to collapse
I suggest you uninstall samsung kies first.
Proceed here uninstall old samsung usb drivers too.
http://forum.xda-developers.com/showthread.php?t=2038555
There is 3 methods of installing it clearly written there with step by step instructions. Hope with this method your pc recognize your phone.
If that method fails.
Like many said you have to manually insert rom files into your external sd card using a reader. I hope your problem is not similar to this guy
http://forum.cyanogenmod.com/topic/76864-pc-wont-recognize-phone-after-installing-cm-102-20130727/
You said Odin not recognize phone how about Kies? If you have not tried Kies and you can get it to recognize your phone try this Emergency Firmware Recovery link works on S3 >> http://forum.xda-developers.com/showthread.php?t=2261153 <<
Hi,
Tried various USB cables and nada. Due to this Odin, Kies or anything will else will not recognise the handset and that's on a PC and a Laptop.
As for the Mass Storage in recovery, the version of CMR doesn't have that option otherwise i would have tried!
I was focusing more on trying to mount the Ext SD card on CMR. Is there any suggestions on this? Tried NTFS and Fat 32 with varying cluster sizes but not happening. Any other suggestions?
boabbyshaft said:
Hi,
Tried various USB cables and nada. Due to this Odin, Kies or anything will else will not recognise the handset and that's on a PC and a Laptop.
As for the Mass Storage in recovery, the version of CMR doesn't have that option otherwise i would have tried!
I was focusing more on trying to mount the Ext SD card on CMR. Is there any suggestions on this? Tried NTFS and Fat 32 with varying cluster sizes but not happening. Any other suggestions?
Click to expand...
Click to collapse
Can you mount OTG in your version of cwm >> http://forum.xda-developers.com/showthread.php?t=1787054 << possibly flash from there..
boabbyshaft said:
Hi,
Tried various USB cables and nada. Due to this Odin, Kies or anything will else will not recognise the handset and that's on a PC and a Laptop.
As for the Mass Storage in recovery, the version of CMR doesn't have that option otherwise i would have tried!
I was focusing more on trying to mount the Ext SD card on CMR. Is there any suggestions on this? Tried NTFS and Fat 32 with varying cluster sizes but not happening. Any other suggestions?
Click to expand...
Click to collapse
Have u tried manually installing drivers? Connect yr ph in download mode to yr pc and open device manager, pull out and see if there is any response then reinsert yr usb if u may see yr device with a triangle n ! Right click and update ' let me choose' and point to the samsung drivers folder. Cheers!
boabbyshaft said:
I was focusing more on trying to mount the Ext SD card on CMR. Is there any suggestions on this? Tried NTFS and Fat 32 with varying cluster sizes but not happening. Any other suggestions?
Click to expand...
Click to collapse
Fat32 should work, not sure about NTFS... Did u tried another card? Or removing battery and reinserting after SD card format?
Thanks for all the suggestions.... Had a family emergency.
Tried everything, i now think that there is a hardware issue with the phone as its a Code 43 error whenever i try to update the driver so the handset can talk to my PC. Seen as this option looks fooked i can only now and try to figure why the Ext SD wont mount on CMR and how to resolve it.
If i can;t then no option but to send it to the big warehouse in the Sky,
Just to exclude, did you tried another SD card?
Sent from my GT-I9300 using Tapatalk
My G3 is a blank slate right now.
I put the SD card into my PC and downloaded the CM12 file and the Gapps file. Now with it back in the phone I can't find them. I click install > External Sd > nothing there.
Under "mount" it wont let me click the SD card.
Where do I start?
I would plug the phone in and reflash back stock and start over. But u could try mounting the the phone as usb storage and dl the files directly to it thn search for them on the internal storage since it wont connect to the sd.
deron37129 said:
I would plug the phone in and reflash back stock and start over. But u could try mounting the the phone as usb storage and dl the files directly to it thn search for them on the internal storage since it wont connect to the sd.
Click to expand...
Click to collapse
Plug it into where and reflash it how? You have to ELI5. I'm reformatting my SD card now to see if it will recognize it.
Wow. I really had to go through some trial and error there. I spend the last few hours trying to get the ADB side loading to work. Trying ever driver known to man. I kept getting the no devices message. There was a specific order that it had to be done in order for it to be recognizing the device at the time of loading. Enable mtp > adp > plug in > side load.
I'm up and running CM12 now. And I'm ready for bed!
Since you have twrp installed, why not just get an SD card and put a ROM on it and flash? Seems like the easy way to me.
For future reference, was the phone recognized by adb when in TWRP? If so, did you try to push any files to the internal storage?
I did that once I just flashed a tot file then just rerooted I couldn't connect phone back with adb or anything
I have a Samsung GT-i9100 and all I wanted to do was install CyanogenMod 12.1 custom ROM and partition the internal SD to something like 4 GB rather than 2 GB. WELL... this has been a complete nightmare.
I already had Slimsaber's custom ROM (Kitkat 4.4.4) with TWRP. I decided to wipe everything to start fresh. Then I went to mount the microsd card to install the new ROM... and... nothing happens. It won't mount. No error, no nothing. Just highlights blue as if it's about to mount, but it never gets the X in the box beside it and mounts. Just continues to be a blank box. I can't access the microSD card at all. The card I have is FAT32 and it works in other Android systems just fine.
Then I try mounting the USB to my computer. Nothing. No sounds like Windows is detecting it. Nothing. I make sure I have all the appropriate drivers installed. Nothing.
So off I go to try Odin. Still no detection on my computer. So I can't use Odin either.
What do I do?!?!
Stupid cord. It was the stupid cord. I switched it and now ADB sideloader, and USB Storage and everything works fine. Ugh. Transferring ROM file to flash right now!!!
Although if someone could shed some light as to why I can't mount the microSD card... that would be great.
threehappypenguins said:
Stupid cord. It was the stupid cord. I switched it and now ADB sideloader, and USB Storage and everything works fine. Ugh. Transferring ROM file to flash right now!!!
Although if someone could shed some light as to why I can't mount the microSD card... that would be great.
Click to expand...
Click to collapse
It could be many factors. Sometimes changing the recovery will make it work, it could be the sd card has shat itself. Try flashing the latest philz recovery from sdcard0 then reboot into recovery. This has worked for me in the past